9190333ce7
From the PR:
---snip---
I think I have found the change which reversed the channels.
Revision 1.44 of emu10k1.c, which added Audigy support, has the line
emu_wrptr(sc, v->vnum, FXRT, 0xd01c0000);
replaced with the following lines:
if (sc->audigy) {
emu_wrptr(sc, v->vnum, A_FXRT1, v->fxrt1);
emu_wrptr(sc, v->vnum, A_FXRT2, v->fxrt2);
emu_wrptr(sc, v->vnum, A_SENDAMOUNTS, 0);
}
else
emu_wrptr(sc, v->vnum, FXRT, v->fxrt1 << 16);
where v->fxrt1 << 16 == 0xd10c0000
I don't have Audigy, so I'm not sure if the problem affects Audigy cards
too. The order of the channels can't be tested by just altering mixer
settings. Here's a small program to test if the channels are reversed on
your sound card:
#include <sys/soundcard.h>
#include <fcntl.h>
#include <unistd.h>
int main(int argc, char **argv)
{
int fd = open("/dev/dsp", O_WRONLY), format = AFMT_S16_LE;
int channels = 2, rate = 22050, i;
/* 450 Hz sine wave on left channel, right channel silent */
unsigned char samples[] = {0, 0, 0, 0, 94, 16, 0, 0, 120, 32, 0, 0,
9, 48, 0, 0, 208, 62, 0, 0, 143, 76, 0, 0, 12, 89, 0, 0, 19, 100,
0, 0, 117, 109, 0, 0, 11, 117, 0, 0, 182, 122, 0, 0, 92, 126, 0,
0, 239, 127, 0, 0, 105, 127, 0, 0, 202, 124, 0, 0, 32, 120, 0, 0,
124, 113, 0, 0, 251, 104, 0, 0, 193, 94, 0, 0, 249, 82, 0, 0,
212, 69, 0, 0, 138, 55, 0, 0, 85, 40, 0, 0, 120, 24, 0, 0, 51, 8,
0, 0, 205, 247, 0, 0, 136, 231, 0, 0, 171, 215, 0, 0, 118, 200,
0, 0, 44, 186, 0, 0, 7, 173, 0, 0, 63, 161, 0, 0, 5, 151, 0, 0,
132, 142, 0, 0, 224, 135, 0, 0, 54, 131, 0, 0, 151, 128, 0, 0,
17, 128, 0, 0, 164, 129, 0, 0, 74, 133, 0, 0, 245, 138, 0, 0,
139, 146, 0, 0, 237, 155, 0, 0, 244, 166, 0, 0, 113, 179, 0, 0,
48, 193, 0, 0, 247, 207, 0, 0, 136, 223, 0, 0, 162, 239, 0, 0};
ioctl(fd, SNDCTL_DSP_SETFMT,&format);
ioctl(fd, SNDCTL_DSP_CHANNELS,&channels);
ioctl(fd, SNDCTL_DSP_SPEED,&rate);
for(i=0;i<500;i++)
write(fd, &samples, sizeof(samples));
write(fd, &samples, 2); /* swap channels */
for(i=0;i<500;i++)
write(fd, &samples, sizeof(samples));
return 0;
}
You should hear a sound on the left channel followed by a sound on the
right channel. If you hear a sound on the right channel first, the
channels are reversed.
---snip---
Owners of an audigy card should verify if it DTRT and report back.
Noticed by: Matthias Buelow <mkb@mukappabeta.de>
Submitted by: Juha-Matti Tilli <juhis@nallukka.net>
PR: 72221
This is the top level of the FreeBSD source directory. This file was last revised on: $FreeBSD$ For copyright information, please see the file COPYRIGHT in this directory (additional copyright information also exists for some sources in this tree - please see the specific source directories for more information). The Makefile in this directory supports a number of targets for building components (or all) of the FreeBSD source tree, the most commonly used one being ``world'', which rebuilds and installs everything in the FreeBSD system from the source tree except the kernel, the kernel-modules and the contents of /etc. The ``buildkernel'' and ``installkernel'' targets build and install the kernel and the modules (see below). Please see the top of the Makefile in this directory for more information on the standard build targets and compile-time flags. Building a kernel is a somewhat more involved process, documentation for which can be found at: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig.html And in the config(8) man page. Note: If you want to build and install the kernel with the ``buildkernel'' and ``installkernel'' targets, you might need to build world before. More information is available in the handbook. The sample kernel configuration files reside in the sys/<arch>/conf sub-directory (assuming that you've installed the kernel sources), the file named GENERIC being the one used to build your initial installation kernel. The file NOTES contains entries and documentation for all possible devices, not just those commonly used. It is the successor of the ancient LINT file, but in contrast to LINT, it is not buildable as a kernel but a pure reference and documentation file. Source Roadmap: --------------- bin System/user commands. contrib Packages contributed by 3rd parties. crypto Cryptography stuff (see crypto/README). etc Template files for /etc. games Amusements. gnu Various commands and libraries under the GNU Public License. Please see gnu/COPYING* for more information. include System include files. kerberos5 Kerberos5 (Heimdal) package. lib System libraries. libexec System daemons. release Release building Makefile & associated tools. sbin System commands. secure Cryptographic libraries and commands. share Shared resources. sys Kernel sources. tools Utilities for regression testing and miscellaneous tasks. usr.bin User commands. usr.sbin System administration commands. For information on synchronizing your source tree with one or more of the FreeBSD Project's development branches, please see: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/synching.html