adrian 926549a58e Sometimes the AR5416 sends back radar PHY errors with both the PHY error ...

and the CRC error bits set.  The radar payload is correct.

When this happens, the stack doesn't see them PHY error frames and
isn't interpreted as a PHY error.  So, no radar detection and no radiotap
PHY error handling.

Now, this may introduce some weird issues if the MAC sends up some other
combination of CRC error + PHY error frames; this commit would break that
and mark them as PHY errors instead of CRC errors.

I may tinker with this a little more to pass radar/early radar/spectral
frames up as PHY errors if the CRC bit is set, to restore the previous
behaviour (where if CRC is set on a PHY error frame, it's marked as a CRC
error rather than PHY error.)

Tested on:	AR5416, over the air, to a USRP N200 which is generating a
		large number of a variety of radar pulses.
TODO:		Test on AR9130, AR9160, AR9280 (and maybe radar pulses on
		2GHz on AR9285/AR9287.)

PR:		kern/169362

2012-06-24 05:59:32 +00:00

..

ath_dfs/null

Contribute some example code which demonstrates how to initialise the

2012-02-06 20:23:21 +00:00

ath_hal

Sometimes the AR5416 sends back radar PHY errors with both the PHY error

2012-06-24 05:59:32 +00:00

ath_rate

Add in some debugging code to check whether the current rate table has

2012-02-26 06:04:44 +00:00

ah_osdep.c

Stop using the hardware register value byte order swapping for now,

2012-04-19 03:26:21 +00:00

ah_osdep.h

Add placeholder methods for WMI command access (USB, perhaps SDIO later)

2012-04-25 01:42:22 +00:00

if_ath_ahb.c

Begin merging in some of my 802.11n TX aggregation driver changes.

2011-11-08 02:12:11 +00:00

if_ath_beacon.c

Migrate most of the beacon handling functions out to if_ath_beacon.c.

2012-05-20 04:14:29 +00:00

if_ath_beacon.h

Migrate most of the beacon handling functions out to if_ath_beacon.c.

2012-05-20 04:14:29 +00:00

if_ath_debug.c

Revert r233227 and followup commits as it breaks CCMP PN replay detection.

2012-06-11 06:59:28 +00:00

if_ath_debug.h

Migrate ath_debug and sc_debug from an int to a uint64_t / QUAD;

2012-05-15 23:39:37 +00:00

if_ath_keycache.c

Add a 'vap' to ath_keyset().

2011-11-08 19:25:52 +00:00

if_ath_keycache.h

Add a 'vap' to ath_keyset().

2011-11-08 19:25:52 +00:00

if_ath_led.c

Since the only thing with a mux is the AR5416 and later, and we're now

2011-12-26 07:48:29 +00:00

if_ath_led.h

Refactor out the software LED config code into a common function, called

2011-12-26 05:46:22 +00:00

if_ath_misc.h

Implement a separate, smaller pool of ath_buf entries for use by management

2012-06-13 06:57:55 +00:00

if_ath_pci.c

Override some default values to work around various issues in the deep,

2012-04-15 00:04:23 +00:00

if_ath_rx.c

.. and this wasn't supposed to be in the previous commit either.

2012-06-16 22:28:36 +00:00

if_ath_rx.h

Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch].

2012-05-20 02:05:10 +00:00

if_ath_sysctl.c

Implement a global (all non-mgmt traffic) TX ath_buf limitation when

2012-06-14 00:51:53 +00:00

if_ath_sysctl.h

Break out most of the HAL related tweaks into a per-HAL instance,

2011-06-23 02:38:36 +00:00

if_ath_tdma.c

Migrate the TDMA management functions out of if_ath.c into if_ath_tdma.c.

2012-05-20 02:49:42 +00:00

if_ath_tdma.h

Migrate the TDMA management functions out of if_ath.c into if_ath_tdma.c.

2012-05-20 02:49:42 +00:00

if_ath_tsf.h

Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch].

2012-05-20 02:05:10 +00:00

if_ath_tx_ht.c

A few nitpicks:

2012-06-16 21:37:15 +00:00

if_ath_tx_ht.h

Introduce TX aggregation and software TX queue management

2011-11-08 22:43:13 +00:00

if_ath_tx.c

Disable this warning debug for now, as I'm now aware of the particular

2012-06-14 04:01:25 +00:00

if_ath_tx.h

Revert r233227 and followup commits as it breaks CCMP PN replay detection.

2012-06-11 06:59:28 +00:00

if_ath.c

After some discussion with bschmidt@, it's likely better to just go

2012-06-17 03:08:33 +00:00

if_athdfs.h

Change the prototype so the radar enable can fail.

2012-01-28 21:44:42 +00:00

if_athioctl.h

Add a new ioctl for ath(4) which returns the aggregate statistics.

2012-06-10 06:42:18 +00:00

if_athrate.h

Introduce TX aggregation and software TX queue management

2011-11-08 22:43:13 +00:00

if_athvar.h

Shuffle some more fields in ath_buf so it's not too big.

2012-06-16 04:41:35 +00:00