freebsd-skq/sys/powerpc/powermac/openpic_macio.c
Nathan Whitehorn 51d163d3e9 Convert PowerPC AIM PCI and nexus busses to standard OFW bus interface. This
simplifies certain device attachments (Kauai ATA, for instance), and makes
possible others on new hardware.

On G5 systems, there are several otherwise standard PCI devices
(Serverworks SATA) that will not allow their interrupt properties to be
written, so this information must be supplied directly from Open Firmware.

Obtained from:	sparc64
2008-10-14 14:54:14 +00:00

99 lines
2.9 KiB
C

/*-
* Copyright 2003 by Peter Grehan. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <sys/conf.h>
#include <sys/kernel.h>
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/openfirm.h>
#include <machine/bus.h>
#include <machine/intr.h>
#include <machine/intr_machdep.h>
#include <machine/md_var.h>
#include <machine/pio.h>
#include <machine/resource.h>
#include <vm/vm.h>
#include <vm/pmap.h>
#include <sys/rman.h>
#include <machine/openpicvar.h>
#include "pic_if.h"
/*
* MacIO interface
*/
static int openpic_macio_probe(device_t);
static device_method_t openpic_macio_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, openpic_macio_probe),
DEVMETHOD(device_attach, openpic_attach),
/* PIC interface */
DEVMETHOD(pic_config, openpic_config),
DEVMETHOD(pic_dispatch, openpic_dispatch),
DEVMETHOD(pic_enable, openpic_enable),
DEVMETHOD(pic_eoi, openpic_eoi),
DEVMETHOD(pic_ipi, openpic_ipi),
DEVMETHOD(pic_mask, openpic_mask),
DEVMETHOD(pic_unmask, openpic_unmask),
{ 0, 0 },
};
static driver_t openpic_macio_driver = {
"openpic",
openpic_macio_methods,
sizeof(struct openpic_softc),
};
DRIVER_MODULE(openpic, macio, openpic_macio_driver, openpic_devclass, 0, 0);
static int
openpic_macio_probe(device_t dev)
{
const char *type = ofw_bus_get_type(dev);
if (strcmp(type, "open-pic") != 0)
return (ENXIO);
device_set_desc(dev, OPENPIC_DEVSTR);
return (0);
}