626 lines
16 KiB
C
626 lines
16 KiB
C
/*-
|
|
* Copyright (c) 1991 The Regents of the University of California.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to Berkeley by
|
|
* William Jolitz.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by the University of
|
|
* California, Berkeley and its contributors.
|
|
* 4. Neither the name of the University nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* from: @(#)isa.c 7.2 (Berkeley) 5/13/91
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
/*
|
|
* code to manage AT bus
|
|
*
|
|
* 92/08/18 Frank P. MacLachlan (fpm@crash.cts.com):
|
|
* Fixed uninitialized variable problem and added code to deal
|
|
* with DMA page boundaries in isa_dmarangecheck(). Fixed word
|
|
* mode DMA count compution and reorganized DMA setup code in
|
|
* isa_dmastart()
|
|
*/
|
|
|
|
#ifdef PC98
|
|
#include "opt_pc98.h"
|
|
#endif
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/module.h>
|
|
#ifdef PC98
|
|
#include <machine/md_var.h>
|
|
#endif
|
|
#include <vm/vm.h>
|
|
#include <vm/vm_param.h>
|
|
#include <vm/pmap.h>
|
|
#ifdef PC98
|
|
#include <pc98/pc98/pc98.h>
|
|
#else
|
|
#include <i386/isa/isa.h>
|
|
#endif
|
|
#include <dev/ic/i8237.h>
|
|
#include <isa/isavar.h>
|
|
|
|
/*
|
|
** Register definitions for DMA controller 1 (channels 0..3):
|
|
*/
|
|
#ifdef PC98
|
|
#define DMA1_CHN(c) (IO_DMA + (4*(c))) /* addr reg for channel c */
|
|
#define DMA1_SMSK (IO_DMA + 0x14) /* single mask register */
|
|
#define DMA1_MODE (IO_DMA + 0x16) /* mode register */
|
|
#define DMA1_FFC (IO_DMA + 0x18) /* clear first/last FF */
|
|
#else
|
|
#define DMA1_CHN(c) (IO_DMA1 + 1*(2*(c))) /* addr reg for channel c */
|
|
#define DMA1_SMSK (IO_DMA1 + 1*10) /* single mask register */
|
|
#define DMA1_MODE (IO_DMA1 + 1*11) /* mode register */
|
|
#define DMA1_FFC (IO_DMA1 + 1*12) /* clear first/last FF */
|
|
#endif
|
|
|
|
/*
|
|
** Register definitions for DMA controller 2 (channels 4..7):
|
|
*/
|
|
#define DMA2_CHN(c) (IO_DMA2 + 2*(2*(c))) /* addr reg for channel c */
|
|
#define DMA2_SMSK (IO_DMA2 + 2*10) /* single mask register */
|
|
#define DMA2_MODE (IO_DMA2 + 2*11) /* mode register */
|
|
#define DMA2_FFC (IO_DMA2 + 2*12) /* clear first/last FF */
|
|
|
|
static int isa_dmarangecheck __P((caddr_t va, u_int length, int chan));
|
|
|
|
#ifdef PC98
|
|
static caddr_t dma_bouncebuf[4];
|
|
static u_int dma_bouncebufsize[4];
|
|
#else
|
|
static caddr_t dma_bouncebuf[8];
|
|
static u_int dma_bouncebufsize[8];
|
|
#endif
|
|
static u_int8_t dma_bounced = 0;
|
|
static u_int8_t dma_busy = 0; /* Used in isa_dmastart() */
|
|
static u_int8_t dma_inuse = 0; /* User for acquire/release */
|
|
static u_int8_t dma_auto_mode = 0;
|
|
|
|
#ifdef PC98
|
|
#define VALID_DMA_MASK (3)
|
|
#else
|
|
#define VALID_DMA_MASK (7)
|
|
#endif
|
|
|
|
/* high byte of address is stored in this port for i-th dma channel */
|
|
#ifdef PC98
|
|
static int dmapageport[4] = { 0x27, 0x21, 0x23, 0x25 };
|
|
#else
|
|
static int dmapageport[8] = { 0x87, 0x83, 0x81, 0x82, 0x8f, 0x8b, 0x89, 0x8a };
|
|
#endif
|
|
|
|
/*
|
|
* Setup a DMA channel's bounce buffer.
|
|
*/
|
|
void
|
|
isa_dmainit(chan, bouncebufsize)
|
|
int chan;
|
|
u_int bouncebufsize;
|
|
{
|
|
void *buf;
|
|
|
|
#ifdef DIAGNOSTIC
|
|
if (chan & ~VALID_DMA_MASK)
|
|
panic("isa_dmainit: channel out of range");
|
|
|
|
if (dma_bouncebuf[chan] != NULL)
|
|
panic("isa_dmainit: impossible request");
|
|
#endif
|
|
|
|
dma_bouncebufsize[chan] = bouncebufsize;
|
|
|
|
/* Try malloc() first. It works better if it works. */
|
|
buf = malloc(bouncebufsize, M_DEVBUF, M_NOWAIT);
|
|
if (buf != NULL) {
|
|
if (isa_dmarangecheck(buf, bouncebufsize, chan) == 0) {
|
|
dma_bouncebuf[chan] = buf;
|
|
return;
|
|
}
|
|
free(buf, M_DEVBUF);
|
|
}
|
|
buf = contigmalloc(bouncebufsize, M_DEVBUF, M_NOWAIT, 0ul, 0xfffffful,
|
|
1ul, chan & 4 ? 0x20000ul : 0x10000ul);
|
|
if (buf == NULL)
|
|
printf("isa_dmainit(%d, %d) failed\n", chan, bouncebufsize);
|
|
else
|
|
dma_bouncebuf[chan] = buf;
|
|
}
|
|
|
|
/*
|
|
* Register a DMA channel's usage. Usually called from a device driver
|
|
* in open() or during its initialization.
|
|
*/
|
|
int
|
|
isa_dma_acquire(chan)
|
|
int chan;
|
|
{
|
|
#ifdef DIAGNOSTIC
|
|
if (chan & ~VALID_DMA_MASK)
|
|
panic("isa_dma_acquire: channel out of range");
|
|
#endif
|
|
|
|
if (dma_inuse & (1 << chan)) {
|
|
printf("isa_dma_acquire: channel %d already in use\n", chan);
|
|
return (EBUSY);
|
|
}
|
|
dma_inuse |= (1 << chan);
|
|
dma_auto_mode &= ~(1 << chan);
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Unregister a DMA channel's usage. Usually called from a device driver
|
|
* during close() or during its shutdown.
|
|
*/
|
|
void
|
|
isa_dma_release(chan)
|
|
int chan;
|
|
{
|
|
#ifdef DIAGNOSTIC
|
|
if (chan & ~VALID_DMA_MASK)
|
|
panic("isa_dma_release: channel out of range");
|
|
|
|
if ((dma_inuse & (1 << chan)) == 0)
|
|
printf("isa_dma_release: channel %d not in use\n", chan);
|
|
#endif
|
|
|
|
if (dma_busy & (1 << chan)) {
|
|
dma_busy &= ~(1 << chan);
|
|
/*
|
|
* XXX We should also do "dma_bounced &= (1 << chan);"
|
|
* because we are acting on behalf of isa_dmadone() which
|
|
* was not called to end the last DMA operation. This does
|
|
* not matter now, but it may in the future.
|
|
*/
|
|
}
|
|
|
|
dma_inuse &= ~(1 << chan);
|
|
dma_auto_mode &= ~(1 << chan);
|
|
}
|
|
|
|
#ifndef PC98
|
|
/*
|
|
* isa_dmacascade(): program 8237 DMA controller channel to accept
|
|
* external dma control by a board.
|
|
*/
|
|
void
|
|
isa_dmacascade(chan)
|
|
int chan;
|
|
{
|
|
#ifdef DIAGNOSTIC
|
|
if (chan & ~VALID_DMA_MASK)
|
|
panic("isa_dmacascade: channel out of range");
|
|
#endif
|
|
|
|
/* set dma channel mode, and set dma channel mode */
|
|
if ((chan & 4) == 0) {
|
|
outb(DMA1_MODE, DMA37MD_CASCADE | chan);
|
|
outb(DMA1_SMSK, chan);
|
|
} else {
|
|
outb(DMA2_MODE, DMA37MD_CASCADE | (chan & 3));
|
|
outb(DMA2_SMSK, chan & 3);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* isa_dmastart(): program 8237 DMA controller channel, avoid page alignment
|
|
* problems by using a bounce buffer.
|
|
*/
|
|
void
|
|
isa_dmastart(int flags, caddr_t addr, u_int nbytes, int chan)
|
|
{
|
|
vm_offset_t phys;
|
|
int waport;
|
|
caddr_t newaddr;
|
|
|
|
GIANT_REQUIRED;
|
|
|
|
#ifdef DIAGNOSTIC
|
|
if (chan & ~VALID_DMA_MASK)
|
|
panic("isa_dmastart: channel out of range");
|
|
|
|
if ((chan < 4 && nbytes > (1<<16))
|
|
|| (chan >= 4 && (nbytes > (1<<17) || (u_int)addr & 1)))
|
|
panic("isa_dmastart: impossible request");
|
|
|
|
if ((dma_inuse & (1 << chan)) == 0)
|
|
printf("isa_dmastart: channel %d not acquired\n", chan);
|
|
#endif
|
|
|
|
#if 0
|
|
/*
|
|
* XXX This should be checked, but drivers like ad1848 only call
|
|
* isa_dmastart() once because they use Auto DMA mode. If we
|
|
* leave this in, drivers that do this will print this continuously.
|
|
*/
|
|
if (dma_busy & (1 << chan))
|
|
printf("isa_dmastart: channel %d busy\n", chan);
|
|
#endif
|
|
|
|
dma_busy |= (1 << chan);
|
|
|
|
if (isa_dmarangecheck(addr, nbytes, chan)) {
|
|
if (dma_bouncebuf[chan] == NULL
|
|
|| dma_bouncebufsize[chan] < nbytes)
|
|
panic("isa_dmastart: bad bounce buffer");
|
|
dma_bounced |= (1 << chan);
|
|
newaddr = dma_bouncebuf[chan];
|
|
|
|
/* copy bounce buffer on write */
|
|
if (!(flags & ISADMA_READ))
|
|
bcopy(addr, newaddr, nbytes);
|
|
addr = newaddr;
|
|
}
|
|
|
|
/* translate to physical */
|
|
phys = pmap_extract(pmap_kernel(), (vm_offset_t)addr);
|
|
|
|
if (flags & ISADMA_RAW) {
|
|
dma_auto_mode |= (1 << chan);
|
|
} else {
|
|
dma_auto_mode &= ~(1 << chan);
|
|
}
|
|
|
|
#ifdef PC98
|
|
if (need_pre_dma_flush)
|
|
wbinvd(); /* wbinvd (WB cache flush) */
|
|
#endif
|
|
|
|
#ifndef PC98
|
|
if ((chan & 4) == 0) {
|
|
/*
|
|
* Program one of DMA channels 0..3. These are
|
|
* byte mode channels.
|
|
*/
|
|
#endif
|
|
/* set dma channel mode, and reset address ff */
|
|
|
|
/* If ISADMA_RAW flag is set, then use autoinitialise mode */
|
|
if (flags & ISADMA_RAW) {
|
|
if (flags & ISADMA_READ)
|
|
outb(DMA1_MODE, DMA37MD_AUTO|DMA37MD_WRITE|chan);
|
|
else
|
|
outb(DMA1_MODE, DMA37MD_AUTO|DMA37MD_READ|chan);
|
|
}
|
|
else
|
|
if (flags & ISADMA_READ)
|
|
outb(DMA1_MODE, DMA37MD_SINGLE|DMA37MD_WRITE|chan);
|
|
else
|
|
outb(DMA1_MODE, DMA37MD_SINGLE|DMA37MD_READ|chan);
|
|
outb(DMA1_FFC, 0);
|
|
|
|
/* send start address */
|
|
waport = DMA1_CHN(chan);
|
|
outb(waport, phys);
|
|
outb(waport, phys>>8);
|
|
outb(dmapageport[chan], phys>>16);
|
|
|
|
/* send count */
|
|
#ifdef PC98
|
|
outb(waport + 2, --nbytes);
|
|
outb(waport + 2, nbytes>>8);
|
|
#else
|
|
outb(waport + 1, --nbytes);
|
|
outb(waport + 1, nbytes>>8);
|
|
#endif
|
|
|
|
/* unmask channel */
|
|
outb(DMA1_SMSK, chan);
|
|
#ifndef PC98
|
|
} else {
|
|
/*
|
|
* Program one of DMA channels 4..7. These are
|
|
* word mode channels.
|
|
*/
|
|
/* set dma channel mode, and reset address ff */
|
|
|
|
/* If ISADMA_RAW flag is set, then use autoinitialise mode */
|
|
if (flags & ISADMA_RAW) {
|
|
if (flags & ISADMA_READ)
|
|
outb(DMA2_MODE, DMA37MD_AUTO|DMA37MD_WRITE|(chan&3));
|
|
else
|
|
outb(DMA2_MODE, DMA37MD_AUTO|DMA37MD_READ|(chan&3));
|
|
}
|
|
else
|
|
if (flags & ISADMA_READ)
|
|
outb(DMA2_MODE, DMA37MD_SINGLE|DMA37MD_WRITE|(chan&3));
|
|
else
|
|
outb(DMA2_MODE, DMA37MD_SINGLE|DMA37MD_READ|(chan&3));
|
|
outb(DMA2_FFC, 0);
|
|
|
|
/* send start address */
|
|
waport = DMA2_CHN(chan - 4);
|
|
outb(waport, phys>>1);
|
|
outb(waport, phys>>9);
|
|
outb(dmapageport[chan], phys>>16);
|
|
|
|
/* send count */
|
|
nbytes >>= 1;
|
|
outb(waport + 2, --nbytes);
|
|
outb(waport + 2, nbytes>>8);
|
|
|
|
/* unmask channel */
|
|
outb(DMA2_SMSK, chan & 3);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
void
|
|
isa_dmadone(int flags, caddr_t addr, int nbytes, int chan)
|
|
{
|
|
#ifdef PC98
|
|
if (flags & ISADMA_READ) {
|
|
/* cache flush only after reading 92/12/9 by A.Kojima */
|
|
if (need_post_dma_flush)
|
|
invd();
|
|
}
|
|
#endif
|
|
|
|
#ifdef DIAGNOSTIC
|
|
if (chan & ~VALID_DMA_MASK)
|
|
panic("isa_dmadone: channel out of range");
|
|
|
|
if ((dma_inuse & (1 << chan)) == 0)
|
|
printf("isa_dmadone: channel %d not acquired\n", chan);
|
|
#endif
|
|
|
|
if (((dma_busy & (1 << chan)) == 0) &&
|
|
(dma_auto_mode & (1 << chan)) == 0 )
|
|
printf("isa_dmadone: channel %d not busy\n", chan);
|
|
|
|
#ifdef PC98
|
|
if ((dma_auto_mode & (1 << chan)) == 0)
|
|
outb(DMA1_SMSK, (chan & 3) | 4);
|
|
#else
|
|
if ((dma_auto_mode & (1 << chan)) == 0)
|
|
outb(chan & 4 ? DMA2_SMSK : DMA1_SMSK, (chan & 3) | 4);
|
|
#endif
|
|
|
|
if (dma_bounced & (1 << chan)) {
|
|
/* copy bounce buffer on read */
|
|
if (flags & ISADMA_READ)
|
|
bcopy(dma_bouncebuf[chan], addr, nbytes);
|
|
|
|
dma_bounced &= ~(1 << chan);
|
|
}
|
|
dma_busy &= ~(1 << chan);
|
|
}
|
|
|
|
/*
|
|
* Check for problems with the address range of a DMA transfer
|
|
* (non-contiguous physical pages, outside of bus address space,
|
|
* crossing DMA page boundaries).
|
|
* Return true if special handling needed.
|
|
*/
|
|
|
|
static int
|
|
isa_dmarangecheck(caddr_t va, u_int length, int chan)
|
|
{
|
|
vm_offset_t phys, priorpage = 0, endva;
|
|
u_int dma_pgmsk = (chan & 4) ? ~(128*1024-1) : ~(64*1024-1);
|
|
|
|
GIANT_REQUIRED;
|
|
|
|
endva = (vm_offset_t)round_page((vm_offset_t)va + length);
|
|
for (; va < (caddr_t) endva ; va += PAGE_SIZE) {
|
|
phys = trunc_page(pmap_extract(pmap_kernel(), (vm_offset_t)va));
|
|
#ifdef EPSON_BOUNCEDMA
|
|
#define ISARAM_END 0xf00000
|
|
#else
|
|
#define ISARAM_END RAM_END
|
|
#endif
|
|
if (phys == 0)
|
|
panic("isa_dmacheck: no physical page present");
|
|
if (phys >= ISARAM_END)
|
|
return (1);
|
|
if (priorpage) {
|
|
if (priorpage + PAGE_SIZE != phys)
|
|
return (1);
|
|
/* check if crossing a DMA page boundary */
|
|
if (((u_int)priorpage ^ (u_int)phys) & dma_pgmsk)
|
|
return (1);
|
|
}
|
|
priorpage = phys;
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Query the progress of a transfer on a DMA channel.
|
|
*
|
|
* To avoid having to interrupt a transfer in progress, we sample
|
|
* each of the high and low databytes twice, and apply the following
|
|
* logic to determine the correct count.
|
|
*
|
|
* Reads are performed with interrupts disabled, thus it is to be
|
|
* expected that the time between reads is very small. At most
|
|
* one rollover in the low count byte can be expected within the
|
|
* four reads that are performed.
|
|
*
|
|
* There are three gaps in which a rollover can occur :
|
|
*
|
|
* - read low1
|
|
* gap1
|
|
* - read high1
|
|
* gap2
|
|
* - read low2
|
|
* gap3
|
|
* - read high2
|
|
*
|
|
* If a rollover occurs in gap1 or gap2, the low2 value will be
|
|
* greater than the low1 value. In this case, low2 and high2 are a
|
|
* corresponding pair.
|
|
*
|
|
* In any other case, low1 and high1 can be considered to be correct.
|
|
*
|
|
* The function returns the number of bytes remaining in the transfer,
|
|
* or -1 if the channel requested is not active.
|
|
*
|
|
*/
|
|
int
|
|
isa_dmastatus(int chan)
|
|
{
|
|
u_long cnt = 0;
|
|
int ffport, waport;
|
|
u_long low1, high1, low2, high2;
|
|
|
|
/* channel active? */
|
|
if ((dma_inuse & (1 << chan)) == 0) {
|
|
printf("isa_dmastatus: channel %d not active\n", chan);
|
|
return(-1);
|
|
}
|
|
/* channel busy? */
|
|
|
|
if (((dma_busy & (1 << chan)) == 0) &&
|
|
(dma_auto_mode & (1 << chan)) == 0 ) {
|
|
printf("chan %d not busy\n", chan);
|
|
return -2 ;
|
|
}
|
|
#ifdef PC98
|
|
ffport = DMA1_FFC;
|
|
waport = DMA1_CHN(chan) + 2;
|
|
#else
|
|
if (chan < 4) { /* low DMA controller */
|
|
ffport = DMA1_FFC;
|
|
waport = DMA1_CHN(chan) + 1;
|
|
} else { /* high DMA controller */
|
|
ffport = DMA2_FFC;
|
|
waport = DMA2_CHN(chan - 4) + 2;
|
|
}
|
|
#endif
|
|
|
|
disable_intr(); /* no interrupts Mr Jones! */
|
|
outb(ffport, 0); /* clear register LSB flipflop */
|
|
low1 = inb(waport);
|
|
high1 = inb(waport);
|
|
outb(ffport, 0); /* clear again */
|
|
low2 = inb(waport);
|
|
high2 = inb(waport);
|
|
enable_intr(); /* enable interrupts again */
|
|
|
|
/*
|
|
* Now decide if a wrap has tried to skew our results.
|
|
* Note that after TC, the count will read 0xffff, while we want
|
|
* to return zero, so we add and then mask to compensate.
|
|
*/
|
|
if (low1 >= low2) {
|
|
cnt = (low1 + (high1 << 8) + 1) & 0xffff;
|
|
} else {
|
|
cnt = (low2 + (high2 << 8) + 1) & 0xffff;
|
|
}
|
|
|
|
if (chan >= 4) /* high channels move words */
|
|
cnt *= 2;
|
|
return(cnt);
|
|
}
|
|
|
|
/*
|
|
* Stop a DMA transfer currently in progress.
|
|
*/
|
|
int
|
|
isa_dmastop(int chan)
|
|
{
|
|
if ((dma_inuse & (1 << chan)) == 0)
|
|
printf("isa_dmastop: channel %d not acquired\n", chan);
|
|
|
|
if (((dma_busy & (1 << chan)) == 0) &&
|
|
((dma_auto_mode & (1 << chan)) == 0)) {
|
|
printf("chan %d not busy\n", chan);
|
|
return -2 ;
|
|
}
|
|
|
|
if ((chan & 4) == 0) {
|
|
outb(DMA1_SMSK, (chan & 3) | 4 /* disable mask */);
|
|
} else {
|
|
#ifndef PC98
|
|
outb(DMA2_SMSK, (chan & 3) | 4 /* disable mask */);
|
|
#endif
|
|
}
|
|
return(isa_dmastatus(chan));
|
|
}
|
|
|
|
/*
|
|
* Attach to the ISA PnP descriptor for the AT DMA controller
|
|
*/
|
|
static struct isa_pnp_id atdma_ids[] = {
|
|
{ 0x0002d041 /* PNP0200 */, "AT DMA controller" },
|
|
{ 0 }
|
|
};
|
|
|
|
static int
|
|
atdma_probe(device_t dev)
|
|
{
|
|
int result;
|
|
|
|
if ((result = ISA_PNP_PROBE(device_get_parent(dev), dev, atdma_ids)) <= 0)
|
|
device_quiet(dev);
|
|
return(result);
|
|
}
|
|
|
|
static int
|
|
atdma_attach(device_t dev)
|
|
{
|
|
return(0);
|
|
}
|
|
|
|
static device_method_t atdma_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, atdma_probe),
|
|
DEVMETHOD(device_attach, atdma_attach),
|
|
DEVMETHOD(device_detach, bus_generic_detach),
|
|
DEVMETHOD(device_shutdown, bus_generic_shutdown),
|
|
DEVMETHOD(device_suspend, bus_generic_suspend),
|
|
DEVMETHOD(device_resume, bus_generic_resume),
|
|
{ 0, 0 }
|
|
};
|
|
|
|
static driver_t atdma_driver = {
|
|
"atdma",
|
|
atdma_methods,
|
|
1, /* no softc */
|
|
};
|
|
|
|
static devclass_t atdma_devclass;
|
|
|
|
DRIVER_MODULE(atdma, isa, atdma_driver, atdma_devclass, 0, 0);
|
|
#ifndef PC98
|
|
DRIVER_MODULE(atdma, acpi, atdma_driver, atdma_devclass, 0, 0);
|
|
#endif
|