d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
96fc5a062e
freebsd-skq/sys/dev/ed/if_ed.c
Warner Losh 5c8fcbc866 Patch to allow the ed driver interrupt routine to terminate if the 
card is ejected while we're in this routine.

yamamoto-san's original patch had a small race window for AX88190
chips, which I corrected by limiting the number of iterations we'd try
to reset the bits to be about 15ms rather than forever.  This seems to
work for me, but I don't have a large collections of cards based on
this chipset.

Submitted by:	YAMAMOTO Shigeru
2001-11-24 16:15:18 +00:00

3483 lines
83 KiB
C
Raw Blame History

/*
* Copyright (c) 1995, David Greenman
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice unmodified, this list of conditions, and the following
* disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
/*
* Device driver for National Semiconductor DS8390/WD83C690 based ethernet
* adapters. By David Greenman, 29-April-1993
*
* Currently supports the Western Digital/SMC 8003 and 8013 series,
* the SMC Elite Ultra (8216), the 3Com 3c503, the NE1000 and NE2000,
* and a variety of similar clones.
*
*/
#include "opt_ed.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/sockio.h>
#include <sys/mbuf.h>
#include <sys/kernel.h>
#include <sys/socket.h>
#include <sys/syslog.h>
#include <sys/bus.h>
#include <machine/bus.h>
#include <sys/rman.h>
#include <machine/resource.h>
#include <net/ethernet.h>
#include <net/if.h>
#include <net/if_arp.h>
#include <net/if_dl.h>
#include <net/if_mib.h>
#include <net/if_media.h>
#ifndef ED_NO_MIIBUS
#include <dev/mii/mii.h>
#include <dev/mii/miivar.h>
#endif
#include <net/bpf.h>
#include <net/bridge.h>
#include <machine/md_var.h>
#include <dev/ed/if_edreg.h>
#include <dev/ed/if_edvar.h>
devclass_t ed_devclass;
static void ed_init __P((void *));
static int ed_ioctl __P((struct ifnet *, u_long, caddr_t));
static void ed_start __P((struct ifnet *));
static void ed_reset __P((struct ifnet *));
static void ed_watchdog __P((struct ifnet *));
#ifndef ED_NO_MIIBUS
static void ed_tick __P((void *));
#endif
static void ds_getmcaf __P((struct ed_softc *, u_int32_t *));
static void ed_get_packet __P((struct ed_softc *, char *, /* u_short */ int));
static __inline void ed_rint __P((struct ed_softc *));
static __inline void ed_xmit __P((struct ed_softc *));
static __inline char * ed_ring_copy __P((struct ed_softc *, char *, char *,
/* u_short */ int));
static void ed_hpp_set_physical_link __P((struct ed_softc *));
static void ed_hpp_readmem __P((struct ed_softc *, int, unsigned char *,
/* u_short */ int));
static void ed_hpp_writemem __P((struct ed_softc *, unsigned char *,
/* u_short */ int, /* u_short */ int));
static u_short ed_hpp_write_mbufs __P((struct ed_softc *, struct mbuf *,
int));
static u_short ed_pio_write_mbufs __P((struct ed_softc *, struct mbuf *,
int));
static void ed_setrcr __P((struct ed_softc *));
static u_int32_t ds_crc __P((u_char *ep));
/*
* Interrupt conversion table for WD/SMC ASIC/83C584
*/
static unsigned short ed_intr_val[] = {
9,
3,
5,
7,
10,
11,
15,
4
};
/*
* Interrupt conversion table for 83C790
*/
static unsigned short ed_790_intr_val[] = {
0,
9,
3,
5,
7,
10,
11,
15
};
/*
* Interrupt conversion table for the HP PC LAN+
*/
static unsigned short ed_hpp_intr_val[] = {
0, /* 0 */
0, /* 1 */
0, /* 2 */
3, /* 3 */
4, /* 4 */
5, /* 5 */
6, /* 6 */
7, /* 7 */
0, /* 8 */
9, /* 9 */
10, /* 10 */
11, /* 11 */
12, /* 12 */
0, /* 13 */
0, /* 14 */
15 /* 15 */
};
/*
* Generic probe routine for testing for the existance of a DS8390.
* Must be called after the NIC has just been reset. This routine
* works by looking at certain register values that are guaranteed
* to be initialized a certain way after power-up or reset. Seems
* not to currently work on the 83C690.
*
* Specifically:
*
* Register reset bits set bits
* Command Register (CR) TXP, STA RD2, STP
* Interrupt Status (ISR) RST
* Interrupt Mask (IMR) All bits
* Data Control (DCR) LAS
* Transmit Config. (TCR) LB1, LB0
*
* We only look at the CR and ISR registers, however, because looking at
* the others would require changing register pages (which would be
* intrusive if this isn't an 8390).
*
* Return 1 if 8390 was found, 0 if not.
*/
int
ed_probe_generic8390(sc)
struct ed_softc *sc;
{
if ((ed_nic_inb(sc, ED_P0_CR) &
(ED_CR_RD2 | ED_CR_TXP | ED_CR_STA | ED_CR_STP)) !=
(ED_CR_RD2 | ED_CR_STP))
return (0);
if ((ed_nic_inb(sc, ED_P0_ISR) & ED_ISR_RST) != ED_ISR_RST)
return (0);
return (1);
}
/*
* Probe and vendor-specific initialization routine for SMC/WD80x3 boards
*/
int
ed_probe_WD80x3_generic(dev, flags, intr_vals)
device_t dev;
int flags;
unsigned short *intr_vals[];
{
struct ed_softc *sc = device_get_softc(dev);
int error;
int i;
u_int memsize, maddr;
u_char iptr, isa16bit, sum, totalsum;
u_long conf_maddr, conf_msize, irq, junk;
sc->chip_type = ED_CHIP_TYPE_DP8390;
if (ED_FLAGS_GETTYPE(flags) == ED_FLAGS_TOSH_ETHER) {
totalsum = ED_WD_ROM_CHECKSUM_TOTAL_TOSH_ETHER;
ed_asic_outb(sc, ED_WD_MSR, ED_WD_MSR_POW);
DELAY(10000);
}
else
totalsum = ED_WD_ROM_CHECKSUM_TOTAL;
/*
* Attempt to do a checksum over the station address PROM. If it
* fails, it's probably not a SMC/WD board. There is a problem with
* this, though: some clone WD boards don't pass the checksum test.
* Danpex boards for one.
*/
for (sum = 0, i = 0; i < 8; ++i)
sum += ed_asic_inb(sc, ED_WD_PROM + i);
if (sum != totalsum) {
/*
* Checksum is invalid. This often happens with cheap WD8003E
* clones. In this case, the checksum byte (the eighth byte)
* seems to always be zero.
*/
if (ed_asic_inb(sc, ED_WD_CARD_ID) != ED_TYPE_WD8003E ||
ed_asic_inb(sc, ED_WD_PROM + 7) != 0)
return (ENXIO);
}
/* reset card to force it into a known state. */
if (ED_FLAGS_GETTYPE(flags) == ED_FLAGS_TOSH_ETHER)
ed_asic_outb(sc, ED_WD_MSR, ED_WD_MSR_RST | ED_WD_MSR_POW);
else
ed_asic_outb(sc, ED_WD_MSR, ED_WD_MSR_RST);
DELAY(100);
ed_asic_outb(sc, ED_WD_MSR, ed_asic_inb(sc, ED_WD_MSR) & ~ED_WD_MSR_RST);
/* wait in the case this card is reading its EEROM */
DELAY(5000);
sc->vendor = ED_VENDOR_WD_SMC;
sc->type = ed_asic_inb(sc, ED_WD_CARD_ID);
/*
* Set initial values for width/size.
*/
memsize = 8192;
isa16bit = 0;
switch (sc->type) {
case ED_TYPE_WD8003S:
sc->type_str = "WD8003S";
break;
case ED_TYPE_WD8003E:
sc->type_str = "WD8003E";
break;
case ED_TYPE_WD8003EB:
sc->type_str = "WD8003EB";
break;
case ED_TYPE_WD8003W:
sc->type_str = "WD8003W";
break;
case ED_TYPE_WD8013EBT:
sc->type_str = "WD8013EBT";
memsize = 16384;
isa16bit = 1;
break;
case ED_TYPE_WD8013W:
sc->type_str = "WD8013W";
memsize = 16384;
isa16bit = 1;
break;
case ED_TYPE_WD8013EP: /* also WD8003EP */
if (ed_asic_inb(sc, ED_WD_ICR) & ED_WD_ICR_16BIT) {
isa16bit = 1;
memsize = 16384;
sc->type_str = "WD8013EP";
} else {
sc->type_str = "WD8003EP";
}
break;
case ED_TYPE_WD8013WC:
sc->type_str = "WD8013WC";
memsize = 16384;
isa16bit = 1;
break;
case ED_TYPE_WD8013EBP:
sc->type_str = "WD8013EBP";
memsize = 16384;
isa16bit = 1;
break;
case ED_TYPE_WD8013EPC:
sc->type_str = "WD8013EPC";
memsize = 16384;
isa16bit = 1;
break;
case ED_TYPE_SMC8216C: /* 8216 has 16K shared mem -- 8416 has 8K */
case ED_TYPE_SMC8216T:
if (sc->type == ED_TYPE_SMC8216C) {
sc->type_str = "SMC8216/SMC8216C";
} else {
sc->type_str = "SMC8216T";
}
ed_asic_outb(sc, ED_WD790_HWR,
ed_asic_inb(sc, ED_WD790_HWR) | ED_WD790_HWR_SWH);
switch (ed_asic_inb(sc, ED_WD790_RAR) & ED_WD790_RAR_SZ64) {
case ED_WD790_RAR_SZ64:
memsize = 65536;
break;
case ED_WD790_RAR_SZ32:
memsize = 32768;
break;
case ED_WD790_RAR_SZ16:
memsize = 16384;
break;
case ED_WD790_RAR_SZ8:
/* 8216 has 16K shared mem -- 8416 has 8K */
if (sc->type == ED_TYPE_SMC8216C) {
sc->type_str = "SMC8416C/SMC8416BT";
} else {
sc->type_str = "SMC8416T";
}
memsize = 8192;
break;
}
ed_asic_outb(sc, ED_WD790_HWR,
ed_asic_inb(sc, ED_WD790_HWR) & ~ED_WD790_HWR_SWH);
isa16bit = 1;
sc->chip_type = ED_CHIP_TYPE_WD790;
break;
case ED_TYPE_TOSHIBA1:
sc->type_str = "Toshiba1";
memsize = 32768;
isa16bit = 1;
break;
case ED_TYPE_TOSHIBA4:
sc->type_str = "Toshiba4";
memsize = 32768;
isa16bit = 1;
break;
default:
sc->type_str = "";
break;
}
/*
* Make some adjustments to initial values depending on what is found
* in the ICR.
*/
if (isa16bit && (sc->type != ED_TYPE_WD8013EBT)
&& (sc->type != ED_TYPE_TOSHIBA1) && (sc->type != ED_TYPE_TOSHIBA4)
&& ((ed_asic_inb(sc, ED_WD_ICR) & ED_WD_ICR_16BIT) == 0)) {
isa16bit = 0;
memsize = 8192;
}
error = bus_get_resource(dev, SYS_RES_MEMORY, 0,
&conf_maddr, &conf_msize);
if (error)
return (error);
#if ED_DEBUG
printf("type = %x type_str=%s isa16bit=%d memsize=%d id_msize=%d\n",
sc->type, sc->type_str, isa16bit, memsize, conf_msize);
for (i = 0; i < 8; i++)
printf("%x -> %x\n", i, ed_asic_inb(sc, i));
#endif
/*
* Allow the user to override the autoconfiguration
*/
if (conf_msize > 1)
memsize = conf_msize;
maddr = conf_maddr;
if (maddr < 0xa0000 || maddr + memsize > 0x1000000) {
device_printf(dev, "Invalid ISA memory address range configured: 0x%x - 0x%x\n",
maddr, maddr + memsize);
return (ENXIO);
}
/*
* (note that if the user specifies both of the following flags that
* '8bit' mode intentionally has precedence)
*/
if (flags & ED_FLAGS_FORCE_16BIT_MODE)
isa16bit = 1;
if (flags & ED_FLAGS_FORCE_8BIT_MODE)
isa16bit = 0;
/*
* If possible, get the assigned interrupt number from the card and
* use it.
*/
if ((sc->type & ED_WD_SOFTCONFIG) &&
(sc->chip_type != ED_CHIP_TYPE_WD790)) {
/*
* Assemble together the encoded interrupt number.
*/
iptr = (ed_asic_inb(sc, ED_WD_ICR) & ED_WD_ICR_IR2) |
((ed_asic_inb(sc, ED_WD_IRR) &
(ED_WD_IRR_IR0 | ED_WD_IRR_IR1)) >> 5);
/*
* If no interrupt specified (or "?"), use what the board tells us.
*/
error = bus_get_resource(dev, SYS_RES_IRQ, 0,
&irq, &junk);
if (error && intr_vals[0] != NULL) {
error = bus_set_resource(dev, SYS_RES_IRQ, 0,
intr_vals[0][iptr], 1);
}
if (error)
return (error);
/*
* Enable the interrupt.
*/
ed_asic_outb(sc, ED_WD_IRR,
ed_asic_inb(sc, ED_WD_IRR) | ED_WD_IRR_IEN);
}
if (sc->chip_type == ED_CHIP_TYPE_WD790) {
ed_asic_outb(sc, ED_WD790_HWR,
ed_asic_inb(sc, ED_WD790_HWR) | ED_WD790_HWR_SWH);
iptr = (((ed_asic_inb(sc, ED_WD790_GCR) & ED_WD790_GCR_IR2) >> 4) |
(ed_asic_inb(sc, ED_WD790_GCR) &
(ED_WD790_GCR_IR1 | ED_WD790_GCR_IR0)) >> 2);
ed_asic_outb(sc, ED_WD790_HWR,
ed_asic_inb(sc, ED_WD790_HWR) & ~ED_WD790_HWR_SWH);
/*
* If no interrupt specified (or "?"), use what the board tells us.
*/
error = bus_get_resource(dev, SYS_RES_IRQ, 0,
&irq, &junk);
if (error && intr_vals[1] != NULL) {
error = bus_set_resource(dev, SYS_RES_IRQ, 0,
intr_vals[1][iptr], 1);
}
if (error)
return (error);
/*
* Enable interrupts.
*/
ed_asic_outb(sc, ED_WD790_ICR,
ed_asic_inb(sc, ED_WD790_ICR) | ED_WD790_ICR_EIL);
}
error = bus_get_resource(dev, SYS_RES_IRQ, 0,
&irq, &junk);
if (error) {
device_printf(dev, "%s cards don't support auto-detected/assigned interrupts.\n",
sc->type_str);
return (ENXIO);
}
sc->isa16bit = isa16bit;
sc->mem_shared = 1;
error = ed_alloc_memory(dev, 0, memsize);
if (error) {
printf("*** ed_alloc_memory() failed! (%d)\n", error);
return (error);
}
sc->mem_start = (caddr_t) rman_get_virtual(sc->mem_res);
/*
* allocate one xmit buffer if < 16k, two buffers otherwise
*/
if ((memsize < 16384) ||
(flags & ED_FLAGS_NO_MULTI_BUFFERING)) {
sc->txb_cnt = 1;
} else {
sc->txb_cnt = 2;
}
sc->tx_page_start = ED_WD_PAGE_OFFSET;
sc->rec_page_start = ED_WD_PAGE_OFFSET + ED_TXBUF_SIZE * sc->txb_cnt;
sc->rec_page_stop = ED_WD_PAGE_OFFSET + memsize / ED_PAGE_SIZE;
sc->mem_ring = sc->mem_start + (ED_PAGE_SIZE * sc->rec_page_start);
sc->mem_size = memsize;
sc->mem_end = sc->mem_start + memsize;
/*
* Get station address from on-board ROM
*/
for (i = 0; i < ETHER_ADDR_LEN; ++i)
sc->arpcom.ac_enaddr[i] = ed_asic_inb(sc, ED_WD_PROM + i);
/*
* Set upper address bits and 8/16 bit access to shared memory.
*/
if (isa16bit) {
if (sc->chip_type == ED_CHIP_TYPE_WD790) {
sc->wd_laar_proto = ed_asic_inb(sc, ED_WD_LAAR);
} else {
sc->wd_laar_proto = ED_WD_LAAR_L16EN |
((kvtop(sc->mem_start) >> 19) & ED_WD_LAAR_ADDRHI);
}
/*
* Enable 16bit access
*/
ed_asic_outb(sc, ED_WD_LAAR, sc->wd_laar_proto |
ED_WD_LAAR_M16EN);
} else {
if (((sc->type & ED_WD_SOFTCONFIG) ||
(sc->type == ED_TYPE_TOSHIBA1) ||
(sc->type == ED_TYPE_TOSHIBA4) ||
(sc->type == ED_TYPE_WD8013EBT)) &&
(sc->chip_type != ED_CHIP_TYPE_WD790)) {
sc->wd_laar_proto = (kvtop(sc->mem_start) >> 19) &
ED_WD_LAAR_ADDRHI;
ed_asic_outb(sc, ED_WD_LAAR, sc->wd_laar_proto);
}
}
/*
* Set address and enable interface shared memory.
*/
if (sc->chip_type != ED_CHIP_TYPE_WD790) {
if (ED_FLAGS_GETTYPE(flags) == ED_FLAGS_TOSH_ETHER) {
ed_asic_outb(sc, ED_WD_MSR + 1,
((kvtop(sc->mem_start) >> 8) & 0xe0) | 4);
ed_asic_outb(sc, ED_WD_MSR + 2,
((kvtop(sc->mem_start) >> 16) & 0x0f));
ed_asic_outb(sc, ED_WD_MSR,
ED_WD_MSR_MENB | ED_WD_MSR_POW);
} else {
ed_asic_outb(sc, ED_WD_MSR,
((kvtop(sc->mem_start) >> 13) &
ED_WD_MSR_ADDR) | ED_WD_MSR_MENB);
}
sc->cr_proto = ED_CR_RD2;
} else {
ed_asic_outb(sc, ED_WD_MSR, ED_WD_MSR_MENB);
ed_asic_outb(sc, ED_WD790_HWR, (ed_asic_inb(sc, ED_WD790_HWR) | ED_WD790_HWR_SWH));
ed_asic_outb(sc, ED_WD790_RAR, ((kvtop(sc->mem_start) >> 13) & 0x0f) |
((kvtop(sc->mem_start) >> 11) & 0x40) |
(ed_asic_inb(sc, ED_WD790_RAR) & 0xb0));
ed_asic_outb(sc, ED_WD790_HWR, (ed_asic_inb(sc, ED_WD790_HWR) & ~ED_WD790_HWR_SWH));
sc->cr_proto = 0;
}
#if 0
printf("starting memory performance test at 0x%x, size %d...\n",
sc->mem_start, memsize*16384);
for (i = 0; i < 16384; i++)
bzero(sc->mem_start, memsize);
printf("***DONE***\n");
#endif
/*
* Now zero memory and verify that it is clear
*/
bzero(sc->mem_start, memsize);
for (i = 0; i < memsize; ++i) {
if (sc->mem_start[i]) {
device_printf(dev, "failed to clear shared memory at %lx - check configuration\n",
kvtop(sc->mem_start + i));
/*
* Disable 16 bit access to shared memory
*/
if (isa16bit) {
if (sc->chip_type == ED_CHIP_TYPE_WD790) {
ed_asic_outb(sc, ED_WD_MSR, 0x00);
}
ed_asic_outb(sc, ED_WD_LAAR, sc->wd_laar_proto &
~ED_WD_LAAR_M16EN);
}
return (ENXIO);
}
}
/*
* Disable 16bit access to shared memory - we leave it
* disabled so that 1) machines reboot properly when the board
* is set 16 bit mode and there are conflicting 8bit
* devices/ROMS in the same 128k address space as this boards
* shared memory. and 2) so that other 8 bit devices with
* shared memory can be used in this 128k region, too.
*/
if (isa16bit) {
if (sc->chip_type == ED_CHIP_TYPE_WD790) {
ed_asic_outb(sc, ED_WD_MSR, 0x00);
}
ed_asic_outb(sc, ED_WD_LAAR, sc->wd_laar_proto &
~ED_WD_LAAR_M16EN);
}
return (0);
}
int
ed_probe_WD80x3(dev, port_rid, flags)
device_t dev;
int port_rid;
int flags;
{
struct ed_softc *sc = device_get_softc(dev);
int error;
static unsigned short *intr_vals[] = {ed_intr_val, ed_790_intr_val};
error = ed_alloc_port(dev, port_rid, ED_WD_IO_PORTS);
if (error)
return (error);
sc->asic_offset = ED_WD_ASIC_OFFSET;
sc->nic_offset = ED_WD_NIC_OFFSET;
return ed_probe_WD80x3_generic(dev, flags, intr_vals);
}
/*
* Probe and vendor-specific initialization routine for 3Com 3c503 boards
*/
int
ed_probe_3Com(dev, port_rid, flags)
device_t dev;
int port_rid;
int flags;
{
struct ed_softc *sc = device_get_softc(dev);
int error;
int i;
u_int memsize;
u_char isa16bit;
u_long conf_maddr, conf_msize, irq, junk;
error = ed_alloc_port(dev, 0, ED_3COM_IO_PORTS);
if (error)
return (error);
sc->asic_offset = ED_3COM_ASIC_OFFSET;
sc->nic_offset = ED_3COM_NIC_OFFSET;
/*
* Verify that the kernel configured I/O address matches the board
* configured address
*/
switch (ed_asic_inb(sc, ED_3COM_BCFR)) {
case ED_3COM_BCFR_300:
if (rman_get_start(sc->port_res) != 0x300)
return (ENXIO);
break;
case ED_3COM_BCFR_310:
if (rman_get_start(sc->port_res) != 0x310)
return (ENXIO);
break;
case ED_3COM_BCFR_330:
if (rman_get_start(sc->port_res) != 0x330)
return (ENXIO);
break;
case ED_3COM_BCFR_350:
if (rman_get_start(sc->port_res) != 0x350)
return (ENXIO);
break;
case ED_3COM_BCFR_250:
if (rman_get_start(sc->port_res) != 0x250)
return (ENXIO);
break;
case ED_3COM_BCFR_280:
if (rman_get_start(sc->port_res) != 0x280)
return (ENXIO);
break;
case ED_3COM_BCFR_2A0:
if (rman_get_start(sc->port_res) != 0x2a0)
return (ENXIO);
break;
case ED_3COM_BCFR_2E0:
if (rman_get_start(sc->port_res) != 0x2e0)
return (ENXIO);
break;
default:
return (ENXIO);
}
error = bus_get_resource(dev, SYS_RES_MEMORY, 0,
&conf_maddr, &conf_msize);
if (error)
return (error);
/*
* Verify that the kernel shared memory address matches the board
* configured address.
*/
switch (ed_asic_inb(sc, ED_3COM_PCFR)) {
case ED_3COM_PCFR_DC000:
if (conf_maddr != 0xdc000)
return (ENXIO);
break;
case ED_3COM_PCFR_D8000:
if (conf_maddr != 0xd8000)
return (ENXIO);
break;
case ED_3COM_PCFR_CC000:
if (conf_maddr != 0xcc000)
return (ENXIO);
break;
case ED_3COM_PCFR_C8000:
if (conf_maddr != 0xc8000)
return (ENXIO);
break;
default:
return (ENXIO);
}
/*
* Reset NIC and ASIC. Enable on-board transceiver throughout reset
* sequence because it'll lock up if the cable isn't connected if we
* don't.
*/
ed_asic_outb(sc, ED_3COM_CR, ED_3COM_CR_RST | ED_3COM_CR_XSEL);
/*
* Wait for a while, then un-reset it
*/
DELAY(50);
/*
* The 3Com ASIC defaults to rather strange settings for the CR after
* a reset - it's important to set it again after the following outb
* (this is done when we map the PROM below).
*/
ed_asic_outb(sc, ED_3COM_CR, ED_3COM_CR_XSEL);
/*
* Wait a bit for the NIC to recover from the reset
*/
DELAY(5000);
sc->vendor = ED_VENDOR_3COM;
sc->type_str = "3c503";
sc->mem_shared = 1;
sc->cr_proto = ED_CR_RD2;
/*
* Hmmm...a 16bit 3Com board has 16k of memory, but only an 8k window
* to it.
*/
memsize = 8192;
/*
* Get station address from on-board ROM
*/
/*
* First, map ethernet address PROM over the top of where the NIC
* registers normally appear.
*/
ed_asic_outb(sc, ED_3COM_CR, ED_3COM_CR_EALO | ED_3COM_CR_XSEL);
for (i = 0; i < ETHER_ADDR_LEN; ++i)
sc->arpcom.ac_enaddr[i] = ed_nic_inb(sc, i);
/*
* Unmap PROM - select NIC registers. The proper setting of the
* tranceiver is set in ed_init so that the attach code is given a
* chance to set the default based on a compile-time config option
*/
ed_asic_outb(sc, ED_3COM_CR, ED_3COM_CR_XSEL);
/*
* Determine if this is an 8bit or 16bit board
*/
/*
* select page 0 registers
*/
ed_nic_outb(sc, ED_P0_CR, ED_CR_RD2 | ED_CR_STP);
/*
* Attempt to clear WTS bit. If it doesn't clear, then this is a 16bit
* board.
*/
ed_nic_outb(sc, ED_P0_DCR, 0);
/*
* select page 2 registers
*/
ed_nic_outb(sc, ED_P0_CR, ED_CR_PAGE_2 | ED_CR_RD2 | ED_CR_STP);
/*
* The 3c503 forces the WTS bit to a one if this is a 16bit board
*/
if (ed_nic_inb(sc, ED_P2_DCR) & ED_DCR_WTS)
isa16bit = 1;
else
isa16bit = 0;
/*
* select page 0 registers
*/
ed_nic_outb(sc, ED_P2_CR, ED_CR_RD2 | ED_CR_STP);
error = ed_alloc_memory(dev, 0, memsize);
if (error)
return (error);
sc->mem_start = (caddr_t) rman_get_virtual(sc->mem_res);
sc->mem_size = memsize;
sc->mem_end = sc->mem_start + memsize;
/*
* We have an entire 8k window to put the transmit buffers on the
* 16bit boards. But since the 16bit 3c503's shared memory is only
* fast enough to overlap the loading of one full-size packet, trying
* to load more than 2 buffers can actually leave the transmitter idle
* during the load. So 2 seems the best value. (Although a mix of
* variable-sized packets might change this assumption. Nonetheless,
* we optimize for linear transfers of same-size packets.)
*/
if (isa16bit) {
if (flags & ED_FLAGS_NO_MULTI_BUFFERING)
sc->txb_cnt = 1;
else
sc->txb_cnt = 2;
sc->tx_page_start = ED_3COM_TX_PAGE_OFFSET_16BIT;
sc->rec_page_start = ED_3COM_RX_PAGE_OFFSET_16BIT;
sc->rec_page_stop = memsize / ED_PAGE_SIZE +
ED_3COM_RX_PAGE_OFFSET_16BIT;
sc->mem_ring = sc->mem_start;
} else {
sc->txb_cnt = 1;
sc->tx_page_start = ED_3COM_TX_PAGE_OFFSET_8BIT;
sc->rec_page_start = ED_TXBUF_SIZE + ED_3COM_TX_PAGE_OFFSET_8BIT;
sc->rec_page_stop = memsize / ED_PAGE_SIZE +
ED_3COM_TX_PAGE_OFFSET_8BIT;
sc->mem_ring = sc->mem_start + (ED_PAGE_SIZE * ED_TXBUF_SIZE);
}
sc->isa16bit = isa16bit;
/*
* Initialize GA page start/stop registers. Probably only needed if
* doing DMA, but what the hell.
*/
ed_asic_outb(sc, ED_3COM_PSTR, sc->rec_page_start);
ed_asic_outb(sc, ED_3COM_PSPR, sc->rec_page_stop);
/*
* Set IRQ. 3c503 only allows a choice of irq 2-5.
*/
error = bus_get_resource(dev, SYS_RES_IRQ, 0, &irq, &junk);
if (error)
return (error);
switch (irq) {
case 2:
case 9:
ed_asic_outb(sc, ED_3COM_IDCFR, ED_3COM_IDCFR_IRQ2);
break;
case 3:
ed_asic_outb(sc, ED_3COM_IDCFR, ED_3COM_IDCFR_IRQ3);
break;
case 4:
ed_asic_outb(sc, ED_3COM_IDCFR, ED_3COM_IDCFR_IRQ4);
break;
case 5:
ed_asic_outb(sc, ED_3COM_IDCFR, ED_3COM_IDCFR_IRQ5);
break;
default:
device_printf(dev, "Invalid irq configuration (%ld) must be 3-5,9 for 3c503\n",
irq);
return (ENXIO);
}
/*
* Initialize GA configuration register. Set bank and enable shared
* mem.
*/
ed_asic_outb(sc, ED_3COM_GACFR, ED_3COM_GACFR_RSEL |
ED_3COM_GACFR_MBS0);
/*
* Initialize "Vector Pointer" registers. These gawd-awful things are
* compared to 20 bits of the address on ISA, and if they match, the
* shared memory is disabled. We set them to 0xffff0...allegedly the
* reset vector.
*/
ed_asic_outb(sc, ED_3COM_VPTR2, 0xff);
ed_asic_outb(sc, ED_3COM_VPTR1, 0xff);
ed_asic_outb(sc, ED_3COM_VPTR0, 0x00);
/*
* Zero memory and verify that it is clear
*/
bzero(sc->mem_start, memsize);
for (i = 0; i < memsize; ++i)
if (sc->mem_start[i]) {
device_printf(dev, "failed to clear shared memory at %lx - check configuration\n",
kvtop(sc->mem_start + i));
return (ENXIO);
}
return (0);
}
/*
* Probe and vendor-specific initialization routine for NE1000/2000 boards
*/
int
ed_probe_Novell_generic(dev, flags)
device_t dev;
int flags;
{
struct ed_softc *sc = device_get_softc(dev);
u_int memsize, n;
u_char romdata[16], tmp;
static char test_pattern[32] = "THIS is A memory TEST pattern";
char test_buffer[32];
/* XXX - do Novell-specific probe here */
/* Reset the board */
if (ED_FLAGS_GETTYPE(flags) == ED_FLAGS_GWETHER) {
ed_asic_outb(sc, ED_NOVELL_RESET, 0);
DELAY(200);
}
tmp = ed_asic_inb(sc, ED_NOVELL_RESET);
/*
* I don't know if this is necessary; probably cruft leftover from
* Clarkson packet driver code. Doesn't do a thing on the boards I've
* tested. -DG [note that a outb(0x84, 0) seems to work here, and is
* non-invasive...but some boards don't seem to reset and I don't have
* complete documentation on what the 'right' thing to do is...so we
* do the invasive thing for now. Yuck.]
*/
ed_asic_outb(sc, ED_NOVELL_RESET, tmp);
DELAY(5000);
/*
* This is needed because some NE clones apparently don't reset the
* NIC properly (or the NIC chip doesn't reset fully on power-up) XXX
* - this makes the probe invasive! ...Done against my better
* judgement. -DLG
*/
ed_nic_outb(sc, ED_P0_CR, ED_CR_RD2 | ED_CR_STP);
DELAY(5000);
/* Make sure that we really have an 8390 based board */
if (!ed_probe_generic8390(sc))
return (ENXIO);
sc->vendor = ED_VENDOR_NOVELL;
sc->mem_shared = 0;
sc->cr_proto = ED_CR_RD2;
/*
* Test the ability to read and write to the NIC memory. This has the
* side affect of determining if this is an NE1000 or an NE2000.
*/
/*
* This prevents packets from being stored in the NIC memory when the
* readmem routine turns on the start bit in the CR.
*/
ed_nic_outb(sc, ED_P0_RCR, ED_RCR_MON);
/* Temporarily initialize DCR for byte operations */
ed_nic_outb(sc, ED_P0_DCR, ED_DCR_FT1 | ED_DCR_LS);
ed_nic_outb(sc, ED_P0_PSTART, 8192 / ED_PAGE_SIZE);
ed_nic_outb(sc, ED_P0_PSTOP, 16384 / ED_PAGE_SIZE);
sc->isa16bit = 0;
/*
* Write a test pattern in byte mode. If this fails, then there
* probably isn't any memory at 8k - which likely means that the board
* is an NE2000.
*/
ed_pio_writemem(sc, test_pattern, 8192, sizeof(test_pattern));
ed_pio_readmem(sc, 8192, test_buffer, sizeof(test_pattern));
if (bcmp(test_pattern, test_buffer, sizeof(test_pattern)) == 0) {
sc->type = ED_TYPE_NE1000;
sc->type_str = "NE1000";
} else {
/* neither an NE1000 nor a Linksys - try NE2000 */
ed_nic_outb(sc, ED_P0_DCR, ED_DCR_WTS | ED_DCR_FT1 | ED_DCR_LS);
ed_nic_outb(sc, ED_P0_PSTART, 16384 / ED_PAGE_SIZE);
ed_nic_outb(sc, ED_P0_PSTOP, 32768 / ED_PAGE_SIZE);
sc->isa16bit = 1;
/*
* Write a test pattern in word mode. If this also fails, then
* we don't know what this board is.
*/
ed_pio_writemem(sc, test_pattern, 16384, sizeof(test_pattern));
ed_pio_readmem(sc, 16384, test_buffer, sizeof(test_pattern));
if (bcmp(test_pattern, test_buffer, sizeof(test_pattern)) == 0) {
sc->type = ED_TYPE_NE2000;
sc->type_str = "NE2000";
} else {
return (ENXIO);
}
}
/* 8k of memory plus an additional 8k if 16bit */
memsize = 8192 + sc->isa16bit * 8192;
#if 0 /* probably not useful - NE boards only come two ways */
/* allow kernel config file overrides */
if (isa_dev->id_msize)
memsize = isa_dev->id_msize;
#endif
sc->mem_size = memsize;
/* NIC memory doesn't start at zero on an NE board */
/* The start address is tied to the bus width */
sc->mem_start = (char *) 8192 + sc->isa16bit * 8192;
sc->mem_end = sc->mem_start + memsize;
sc->tx_page_start = memsize / ED_PAGE_SIZE;
if (ED_FLAGS_GETTYPE(flags) == ED_FLAGS_GWETHER) {
int x, i, mstart = 0, msize = 0;
char pbuf0[ED_PAGE_SIZE], pbuf[ED_PAGE_SIZE], tbuf[ED_PAGE_SIZE];
for (i = 0; i < ED_PAGE_SIZE; i++)
pbuf0[i] = 0;
/* Clear all the memory. */
for (x = 1; x < 256; x++)
ed_pio_writemem(sc, pbuf0, x * 256, ED_PAGE_SIZE);
/* Search for the start of RAM. */
for (x = 1; x < 256; x++) {
ed_pio_readmem(sc, x * 256, tbuf, ED_PAGE_SIZE);
if (bcmp(pbuf0, tbuf, ED_PAGE_SIZE) == 0) {
for (i = 0; i < ED_PAGE_SIZE; i++)
pbuf[i] = 255 - x;
ed_pio_writemem(sc, pbuf, x * 256, ED_PAGE_SIZE);
ed_pio_readmem(sc, x * 256, tbuf, ED_PAGE_SIZE);
if (bcmp(pbuf, tbuf, ED_PAGE_SIZE) == 0) {
mstart = x * ED_PAGE_SIZE;
msize = ED_PAGE_SIZE;
break;
}
}
}
if (mstart == 0) {
device_printf(dev, "Cannot find start of RAM.\n");
return (ENXIO);
}
/* Search for the start of RAM. */
for (x = (mstart / ED_PAGE_SIZE) + 1; x < 256; x++) {
ed_pio_readmem(sc, x * 256, tbuf, ED_PAGE_SIZE);
if (bcmp(pbuf0, tbuf, ED_PAGE_SIZE) == 0) {
for (i = 0; i < ED_PAGE_SIZE; i++)
pbuf[i] = 255 - x;
ed_pio_writemem(sc, pbuf, x * 256, ED_PAGE_SIZE);
ed_pio_readmem(sc, x * 256, tbuf, ED_PAGE_SIZE);
if (bcmp(pbuf, tbuf, ED_PAGE_SIZE) == 0)
msize += ED_PAGE_SIZE;
else {
break;
}
} else {
break;
}
}
if (msize == 0) {
device_printf(dev, "Cannot find any RAM, start : %d, x = %d.\n", mstart, x);
return (ENXIO);
}
device_printf(dev, "RAM start at %d, size : %d.\n", mstart, msize);
sc->mem_size = msize;
sc->mem_start = (caddr_t) mstart;
sc->mem_end = (caddr_t) (msize + mstart);
sc->tx_page_start = mstart / ED_PAGE_SIZE;
}
/*
* Use one xmit buffer if < 16k, two buffers otherwise (if not told
* otherwise).
*/
if ((memsize < 16384) || (flags & ED_FLAGS_NO_MULTI_BUFFERING))
sc->txb_cnt = 1;
else
sc->txb_cnt = 2;
sc->rec_page_start = sc->tx_page_start + sc->txb_cnt * ED_TXBUF_SIZE;
sc->rec_page_stop = sc->tx_page_start + memsize / ED_PAGE_SIZE;
sc->mem_ring = sc->mem_start + sc->txb_cnt * ED_PAGE_SIZE * ED_TXBUF_SIZE;
ed_pio_readmem(sc, 0, romdata, 16);
for (n = 0; n < ETHER_ADDR_LEN; n++)
sc->arpcom.ac_enaddr[n] = romdata[n * (sc->isa16bit + 1)];
if ((ED_FLAGS_GETTYPE(flags) == ED_FLAGS_GWETHER) &&
(sc->arpcom.ac_enaddr[2] == 0x86)) {
sc->type_str = "Gateway AT";
}
/* clear any pending interrupts that might have occurred above */
ed_nic_outb(sc, ED_P0_ISR, 0xff);
return (0);
}
int
ed_probe_Novell(dev, port_rid, flags)
device_t dev;
int port_rid;
int flags;
{
struct ed_softc *sc = device_get_softc(dev);
int error;
error = ed_alloc_port(dev, port_rid, ED_NOVELL_IO_PORTS);
if (error)
return (error);
sc->asic_offset = ED_NOVELL_ASIC_OFFSET;
sc->nic_offset = ED_NOVELL_NIC_OFFSET;
return ed_probe_Novell_generic(dev, flags);
}
#define ED_HPP_TEST_SIZE 16
/*
* Probe and vendor specific initialization for the HP PC Lan+ Cards.
* (HP Part nos: 27247B and 27252A).
*
* The card has an asic wrapper around a DS8390 core. The asic handles
* host accesses and offers both standard register IO and memory mapped
* IO. Memory mapped I/O allows better performance at the expense of greater
* chance of an incompatibility with existing ISA cards.
*
* The card has a few caveats: it isn't tolerant of byte wide accesses, only
* short (16 bit) or word (32 bit) accesses are allowed. Some card revisions
* don't allow 32 bit accesses; these are indicated by a bit in the software
* ID register (see if_edreg.h).
*
* Other caveats are: we should read the MAC address only when the card
* is inactive.
*
* For more information; please consult the CRYNWR packet driver.
*
* The AUI port is turned on using the "link2" option on the ifconfig
* command line.
*/
int
ed_probe_HP_pclanp(dev, port_rid, flags)
device_t dev;
int port_rid;
int flags;
{
struct ed_softc *sc = device_get_softc(dev);
int error;
int n; /* temp var */
int memsize; /* mem on board */
u_char checksum; /* checksum of board address */
u_char irq; /* board configured IRQ */
char test_pattern[ED_HPP_TEST_SIZE]; /* read/write areas for */
char test_buffer[ED_HPP_TEST_SIZE]; /* probing card */
u_long conf_maddr, conf_msize, conf_irq, junk;
error = ed_alloc_port(dev, 0, ED_HPP_IO_PORTS);
if (error)
return (error);
/* Fill in basic information */
sc->asic_offset = ED_HPP_ASIC_OFFSET;
sc->nic_offset = ED_HPP_NIC_OFFSET;
sc->chip_type = ED_CHIP_TYPE_DP8390;
sc->isa16bit = 0; /* the 8390 core needs to be in byte mode */
/*
* Look for the HP PCLAN+ signature: "0x50,0x48,0x00,0x53"
*/
if ((ed_asic_inb(sc, ED_HPP_ID) != 0x50) ||
(ed_asic_inb(sc, ED_HPP_ID + 1) != 0x48) ||
((ed_asic_inb(sc, ED_HPP_ID + 2) & 0xF0) != 0) ||
(ed_asic_inb(sc, ED_HPP_ID + 3) != 0x53))
return ENXIO;
/*
* Read the MAC address and verify checksum on the address.
*/
ed_asic_outw(sc, ED_HPP_PAGING, ED_HPP_PAGE_MAC);
for (n = 0, checksum = 0; n < ETHER_ADDR_LEN; n++)
checksum += (sc->arpcom.ac_enaddr[n] =
ed_asic_inb(sc, ED_HPP_MAC_ADDR + n));
checksum += ed_asic_inb(sc, ED_HPP_MAC_ADDR + ETHER_ADDR_LEN);
if (checksum != 0xFF)
return ENXIO;
/*
* Verify that the software model number is 0.
*/
ed_asic_outw(sc, ED_HPP_PAGING, ED_HPP_PAGE_ID);
if (((sc->hpp_id = ed_asic_inw(sc, ED_HPP_PAGE_4)) &
ED_HPP_ID_SOFT_MODEL_MASK) != 0x0000)
return ENXIO;
/*
* Read in and save the current options configured on card.
*/
sc->hpp_options = ed_asic_inw(sc, ED_HPP_OPTION);
sc->hpp_options |= (ED_HPP_OPTION_NIC_RESET |
ED_HPP_OPTION_CHIP_RESET |
ED_HPP_OPTION_ENABLE_IRQ);
/*
* Reset the chip. This requires writing to the option register
* so take care to preserve the other bits.
*/
ed_asic_outw(sc, ED_HPP_OPTION,
(sc->hpp_options & ~(ED_HPP_OPTION_NIC_RESET |
ED_HPP_OPTION_CHIP_RESET)));
DELAY(5000); /* wait for chip reset to complete */
ed_asic_outw(sc, ED_HPP_OPTION,
(sc->hpp_options | (ED_HPP_OPTION_NIC_RESET |
ED_HPP_OPTION_CHIP_RESET |
ED_HPP_OPTION_ENABLE_IRQ)));
DELAY(5000);
if (!(ed_nic_inb(sc, ED_P0_ISR) & ED_ISR_RST))
return ENXIO; /* reset did not complete */
/*
* Read out configuration information.
*/
ed_asic_outw(sc, ED_HPP_PAGING, ED_HPP_PAGE_HW);
irq = ed_asic_inb(sc, ED_HPP_HW_IRQ);
/*
* Check for impossible IRQ.
*/
if (irq >= (sizeof(ed_hpp_intr_val) / sizeof(ed_hpp_intr_val[0])))
return ENXIO;
/*
* If the kernel IRQ was specified with a '?' use the cards idea
* of the IRQ. If the kernel IRQ was explicitly specified, it
* should match that of the hardware.
*/
error = bus_get_resource(dev, SYS_RES_IRQ, 0,
&conf_irq, &junk);
if (error) {
bus_set_resource(dev, SYS_RES_IRQ, 0,
ed_hpp_intr_val[irq], 1);
} else {
if (conf_irq != ed_hpp_intr_val[irq])
return (ENXIO);
}
/*
* Fill in softconfig info.
*/
sc->vendor = ED_VENDOR_HP;
sc->type = ED_TYPE_HP_PCLANPLUS;
sc->type_str = "HP-PCLAN+";
sc->mem_shared = 0; /* we DON'T have dual ported RAM */
sc->mem_start = 0; /* we use offsets inside the card RAM */
sc->hpp_mem_start = NULL;/* no memory mapped I/O by default */
/*
* The board has 32KB of memory. Is there a way to determine
* this programmatically?
*/
memsize = 32768;
/*
* Check if memory mapping of the I/O registers possible.
*/
if (sc->hpp_options & ED_HPP_OPTION_MEM_ENABLE)
{
u_long mem_addr;
/*
* determine the memory address from the board.
*/
ed_asic_outw(sc, ED_HPP_PAGING, ED_HPP_PAGE_HW);
mem_addr = (ed_asic_inw(sc, ED_HPP_HW_MEM_MAP) << 8);
/*
* Check that the kernel specified start of memory and
* hardware's idea of it match.
*/
error = bus_get_resource(dev, SYS_RES_MEMORY, 0,
&conf_maddr, &conf_msize);
if (error)
return (error);
if (mem_addr != conf_maddr)
return ENXIO;
error = ed_alloc_memory(dev, 0, memsize);
if (error)
return (error);
sc->hpp_mem_start = rman_get_virtual(sc->mem_res);
}
/*
* Fill in the rest of the soft config structure.
*/
/*
* The transmit page index.
*/
sc->tx_page_start = ED_HPP_TX_PAGE_OFFSET;
if (device_get_flags(dev) & ED_FLAGS_NO_MULTI_BUFFERING)
sc->txb_cnt = 1;
else
sc->txb_cnt = 2;
/*
* Memory description
*/
sc->mem_size = memsize;
sc->mem_ring = sc->mem_start +
(sc->txb_cnt * ED_PAGE_SIZE * ED_TXBUF_SIZE);
sc->mem_end = sc->mem_start + sc->mem_size;
/*
* Receive area starts after the transmit area and
* continues till the end of memory.
*/
sc->rec_page_start = sc->tx_page_start +
(sc->txb_cnt * ED_TXBUF_SIZE);
sc->rec_page_stop = (sc->mem_size / ED_PAGE_SIZE);
sc->cr_proto = 0; /* value works */
/*
* Set the wrap registers for string I/O reads.
*/
ed_asic_outw(sc, ED_HPP_PAGING, ED_HPP_PAGE_HW);
ed_asic_outw(sc, ED_HPP_HW_WRAP,
((sc->rec_page_start / ED_PAGE_SIZE) |
(((sc->rec_page_stop / ED_PAGE_SIZE) - 1) << 8)));
/*
* Reset the register page to normal operation.
*/
ed_asic_outw(sc, ED_HPP_PAGING, ED_HPP_PAGE_PERF);
/*
* Verify that we can read/write from adapter memory.
* Create test pattern.
*/
for (n = 0; n < ED_HPP_TEST_SIZE; n++)
{
test_pattern[n] = (n*n) ^ ~n;
}
#undef ED_HPP_TEST_SIZE
/*
* Check that the memory is accessible thru the I/O ports.
* Write out the contents of "test_pattern", read back
* into "test_buffer" and compare the two for any
* mismatch.
*/
for (n = 0; n < (32768 / ED_PAGE_SIZE); n ++) {
ed_hpp_writemem(sc, test_pattern, (n * ED_PAGE_SIZE),
sizeof(test_pattern));
ed_hpp_readmem(sc, (n * ED_PAGE_SIZE),
test_buffer, sizeof(test_pattern));
if (bcmp(test_pattern, test_buffer,
sizeof(test_pattern)))
return ENXIO;
}
return (0);
}
/*
* HP PC Lan+ : Set the physical link to use AUI or TP/TL.
*/
void
ed_hpp_set_physical_link(struct ed_softc *sc)
{
struct ifnet *ifp = &sc->arpcom.ac_if;
int lan_page;
ed_asic_outw(sc, ED_HPP_PAGING, ED_HPP_PAGE_LAN);
lan_page = ed_asic_inw(sc, ED_HPP_PAGE_0);
if (ifp->if_flags & IFF_ALTPHYS) {
/*
* Use the AUI port.
*/
lan_page |= ED_HPP_LAN_AUI;
ed_asic_outw(sc, ED_HPP_PAGING, ED_HPP_PAGE_LAN);
ed_asic_outw(sc, ED_HPP_PAGE_0, lan_page);
} else {
/*
* Use the ThinLan interface
*/
lan_page &= ~ED_HPP_LAN_AUI;
ed_asic_outw(sc, ED_HPP_PAGING, ED_HPP_PAGE_LAN);
ed_asic_outw(sc, ED_HPP_PAGE_0, lan_page);
}
/*
* Wait for the lan card to re-initialize itself
*/
DELAY(150000); /* wait 150 ms */
/*
* Restore normal pages.
*/
ed_asic_outw(sc, ED_HPP_PAGING, ED_HPP_PAGE_PERF);
}
/*
* Allocate a port resource with the given resource id.
*/
int
ed_alloc_port(dev, rid, size)
device_t dev;
int rid;
int size;
{
struct ed_softc *sc = device_get_softc(dev);
struct resource *res;
res = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid,
0ul, ~0ul, size, RF_ACTIVE);
if (res) {
sc->port_rid = rid;
sc->port_res = res;
sc->port_used = size;
return (0);
} else {
return (ENOENT);
}
}
/*
* Allocate a memory resource with the given resource id.
*/
int
ed_alloc_memory(dev, rid, size)
device_t dev;
int rid;
int size;
{
struct ed_softc *sc = device_get_softc(dev);
struct resource *res;
res = bus_alloc_resource(dev, SYS_RES_MEMORY, &rid,
0ul, ~0ul, size, RF_ACTIVE);
if (res) {
sc->mem_rid = rid;
sc->mem_res = res;
sc->mem_used = size;
return (0);
} else {
return (ENOENT);
}
}
/*
* Allocate an irq resource with the given resource id.
*/
int
ed_alloc_irq(dev, rid, flags)
device_t dev;
int rid;
int flags;
{
struct ed_softc *sc = device_get_softc(dev);
struct resource *res;
res = bus_alloc_resource(dev, SYS_RES_IRQ, &rid,
0ul, ~0ul, 1, (RF_ACTIVE | flags));
if (res) {
sc->irq_rid = rid;
sc->irq_res = res;
return (0);
} else {
return (ENOENT);
}
}
/*
* Release all resources
*/
void
ed_release_resources(dev)
device_t dev;
{
struct ed_softc *sc = device_get_softc(dev);
if (sc->port_res) {
bus_deactivate_resource(dev, SYS_RES_IOPORT,
sc->port_rid, sc->port_res);
bus_release_resource(dev, SYS_RES_IOPORT,
sc->port_rid, sc->port_res);
sc->port_res = 0;
}
if (sc->mem_res) {
bus_deactivate_resource(dev, SYS_RES_MEMORY,
sc->mem_rid, sc->mem_res);
bus_release_resource(dev, SYS_RES_MEMORY,
sc->mem_rid, sc->mem_res);
sc->mem_res = 0;
}
if (sc->irq_res) {
bus_deactivate_resource(dev, SYS_RES_IRQ,
sc->irq_rid, sc->irq_res);
bus_release_resource(dev, SYS_RES_IRQ,
sc->irq_rid, sc->irq_res);
sc->irq_res = 0;
}
}
/*
* Install interface into kernel networking data structures
*/
int
ed_attach(sc, unit, flags)
struct ed_softc *sc;
int unit;
int flags;
{
struct ifnet *ifp = &sc->arpcom.ac_if;
callout_handle_init(&sc->tick_ch);
/*
* Set interface to stopped condition (reset)
*/
ed_stop(sc);
if (!ifp->if_name) {
/*
* Initialize ifnet structure
*/
ifp->if_softc = sc;
ifp->if_unit = unit;
ifp->if_name = "ed";
ifp->if_output = ether_output;
ifp->if_start = ed_start;
ifp->if_ioctl = ed_ioctl;
ifp->if_watchdog = ed_watchdog;
ifp->if_init = ed_init;
ifp->if_snd.ifq_maxlen = IFQ_MAXLEN;
ifp->if_linkmib = &sc->mibdata;
ifp->if_linkmiblen = sizeof sc->mibdata;
/*
* XXX - should do a better job.
*/
if (sc->chip_type == ED_CHIP_TYPE_WD790)
sc->mibdata.dot3StatsEtherChipSet =
DOT3CHIPSET(dot3VendorWesternDigital,
dot3ChipSetWesternDigital83C790);
else
sc->mibdata.dot3StatsEtherChipSet =
DOT3CHIPSET(dot3VendorNational,
dot3ChipSetNational8390);
sc->mibdata.dot3Compliance = DOT3COMPLIANCE_COLLS;
/*
* Set default state for ALTPHYS flag (used to disable the
* tranceiver for AUI operation), based on compile-time
* config option.
*/
if (flags & ED_FLAGS_DISABLE_TRANCEIVER)
ifp->if_flags = (IFF_BROADCAST | IFF_SIMPLEX |
IFF_MULTICAST | IFF_ALTPHYS);
else
ifp->if_flags = (IFF_BROADCAST | IFF_SIMPLEX |
IFF_MULTICAST);
/*
* Attach the interface
*/
ether_ifattach(ifp, ETHER_BPF_SUPPORTED);
}
/* device attach does transition from UNCONFIGURED to IDLE state */
/*
* Print additional info when attached
*/
printf("%s%d: address %6D, ", ifp->if_name, ifp->if_unit,
sc->arpcom.ac_enaddr, ":");
if (sc->type_str && (*sc->type_str != 0))
printf("type %s ", sc->type_str);
else
printf("type unknown (0x%x) ", sc->type);
if (sc->vendor == ED_VENDOR_HP)
printf("(%s %s IO)", (sc->hpp_id & ED_HPP_ID_16_BIT_ACCESS) ?
"16-bit" : "32-bit",
sc->hpp_mem_start ? "memory mapped" : "regular");
else
printf("%s ", sc->isa16bit ? "(16 bit)" : "(8 bit)");
printf("%s\n", (((sc->vendor == ED_VENDOR_3COM) ||
(sc->vendor == ED_VENDOR_HP)) &&
(ifp->if_flags & IFF_ALTPHYS)) ? " tranceiver disabled" : "");
return (0);
}
/*
* Reset interface.
*/
static void
ed_reset(ifp)
struct ifnet *ifp;
{
struct ed_softc *sc = ifp->if_softc;
int s;
if (sc->gone)
return;
s = splimp();
/*
* Stop interface and re-initialize.
*/
ed_stop(sc);
ed_init(sc);
(void) splx(s);
}
/*
* Take interface offline.
*/
void
ed_stop(sc)
struct ed_softc *sc;
{
int n = 5000;
#ifndef ED_NO_MIIBUS
untimeout(ed_tick, sc, sc->tick_ch);
callout_handle_init(&sc->tick_ch);
#endif
if (sc->gone)
return;
/*
* Stop everything on the interface, and select page 0 registers.
*/
ed_nic_outb(sc, ED_P0_CR, sc->cr_proto | ED_CR_STP);
/*
* Wait for interface to enter stopped state, but limit # of checks to
* 'n' (about 5ms). It shouldn't even take 5us on modern DS8390's, but
* just in case it's an old one.
*/
if (sc->chip_type != ED_CHIP_TYPE_AX88190)
while (((ed_nic_inb(sc, ED_P0_ISR) & ED_ISR_RST) == 0) && --n);
}
/*
* Device timeout/watchdog routine. Entered if the device neglects to
* generate an interrupt after a transmit has been started on it.
*/
static void
ed_watchdog(ifp)
struct ifnet *ifp;
{
struct ed_softc *sc = ifp->if_softc;
if (sc->gone)
return;
log(LOG_ERR, "ed%d: device timeout\n", ifp->if_unit);
ifp->if_oerrors++;
ed_reset(ifp);
}
#ifndef ED_NO_MIIBUS
static void
ed_tick(arg)
void *arg;
{
struct ed_softc *sc = arg;
struct mii_data *mii;
int s;
if (sc->gone) {
callout_handle_init(&sc->tick_ch);
return;
}
s = splimp();
if (sc->miibus != NULL) {
mii = device_get_softc(sc->miibus);
mii_tick(mii);
}
sc->tick_ch = timeout(ed_tick, sc, hz);
splx(s);
}
#endif
/*
* Initialize device.
*/
static void
ed_init(xsc)
void *xsc;
{
struct ed_softc *sc = xsc;
struct ifnet *ifp = &sc->arpcom.ac_if;
int i, s;
if (sc->gone)
return;
/* address not known */
if (TAILQ_EMPTY(&ifp->if_addrhead)) /* unlikely? XXX */
return;
/*
* Initialize the NIC in the exact order outlined in the NS manual.
* This init procedure is "mandatory"...don't change what or when
* things happen.
*/
s = splimp();
/* reset transmitter flags */
sc->xmit_busy = 0;
ifp->if_timer = 0;
sc->txb_inuse = 0;
sc->txb_new = 0;
sc->txb_next_tx = 0;
/* This variable is used below - don't move this assignment */
sc->next_packet = sc->rec_page_start + 1;
/*
* Set interface for page 0, Remote DMA complete, Stopped
*/
ed_nic_outb(sc, ED_P0_CR, sc->cr_proto | ED_CR_STP);
if (sc->isa16bit) {
/*
* Set FIFO threshold to 8, No auto-init Remote DMA, byte
* order=80x86, word-wide DMA xfers,
*/
ed_nic_outb(sc, ED_P0_DCR, ED_DCR_FT1 | ED_DCR_WTS | ED_DCR_LS);
} else {
/*
* Same as above, but byte-wide DMA xfers
*/
ed_nic_outb(sc, ED_P0_DCR, ED_DCR_FT1 | ED_DCR_LS);
}
/*
* Clear Remote Byte Count Registers
*/
ed_nic_outb(sc, ED_P0_RBCR0, 0);
ed_nic_outb(sc, ED_P0_RBCR1, 0);
/*
* For the moment, don't store incoming packets in memory.
*/
ed_nic_outb(sc, ED_P0_RCR, ED_RCR_MON);
/*
* Place NIC in internal loopback mode
*/
ed_nic_outb(sc, ED_P0_TCR, ED_TCR_LB0);
/*
* Initialize transmit/receive (ring-buffer) Page Start
*/
ed_nic_outb(sc, ED_P0_TPSR, sc->tx_page_start);
ed_nic_outb(sc, ED_P0_PSTART, sc->rec_page_start);
/* Set lower bits of byte addressable framing to 0 */
if (sc->chip_type == ED_CHIP_TYPE_WD790)
ed_nic_outb(sc, 0x09, 0);
/*
* Initialize Receiver (ring-buffer) Page Stop and Boundry
*/
ed_nic_outb(sc, ED_P0_PSTOP, sc->rec_page_stop);
ed_nic_outb(sc, ED_P0_BNRY, sc->rec_page_start);
/*
* Clear all interrupts. A '1' in each bit position clears the
* corresponding flag.
*/
ed_nic_outb(sc, ED_P0_ISR, 0xff);
/*
* Enable the following interrupts: receive/transmit complete,
* receive/transmit error, and Receiver OverWrite.
*
* Counter overflow and Remote DMA complete are *not* enabled.
*/
ed_nic_outb(sc, ED_P0_IMR,
ED_IMR_PRXE | ED_IMR_PTXE | ED_IMR_RXEE | ED_IMR_TXEE | ED_IMR_OVWE);
/*
* Program Command Register for page 1
*/
ed_nic_outb(sc, ED_P0_CR, sc->cr_proto | ED_CR_PAGE_1 | ED_CR_STP);
/*
* Copy out our station address
*/
for (i = 0; i < ETHER_ADDR_LEN; ++i)
ed_nic_outb(sc, ED_P1_PAR(i), sc->arpcom.ac_enaddr[i]);
/*
* Set Current Page pointer to next_packet (initialized above)
*/
ed_nic_outb(sc, ED_P1_CURR, sc->next_packet);
/*
* Program Receiver Configuration Register and multicast filter. CR is
* set to page 0 on return.
*/
ed_setrcr(sc);
/*
* Take interface out of loopback
*/
ed_nic_outb(sc, ED_P0_TCR, 0);
/*
* If this is a 3Com board, the tranceiver must be software enabled
* (there is no settable hardware default).
*/
if (sc->vendor == ED_VENDOR_3COM) {
if (ifp->if_flags & IFF_ALTPHYS) {
ed_asic_outb(sc, ED_3COM_CR, 0);
} else {
ed_asic_outb(sc, ED_3COM_CR, ED_3COM_CR_XSEL);
}
}
#ifndef ED_NO_MIIBUS
if (sc->miibus != NULL) {
struct mii_data *mii;
mii = device_get_softc(sc->miibus);
mii_mediachg(mii);
}
#endif
/*
* Set 'running' flag, and clear output active flag.
*/
ifp->if_flags |= IFF_RUNNING;
ifp->if_flags &= ~IFF_OACTIVE;
/*
* ...and attempt to start output
*/
ed_start(ifp);
#ifndef ED_NO_MIIBUS
untimeout(ed_tick, sc, sc->tick_ch);
sc->tick_ch = timeout(ed_tick, sc, hz);
#endif
(void) splx(s);
}
/*
* This routine actually starts the transmission on the interface
*/
static __inline void
ed_xmit(sc)
struct ed_softc *sc;
{
struct ifnet *ifp = (struct ifnet *)sc;
unsigned short len;
if (sc->gone)
return;
len = sc->txb_len[sc->txb_next_tx];
/*
* Set NIC for page 0 register access
*/
ed_nic_outb(sc, ED_P0_CR, sc->cr_proto | ED_CR_STA);
/*
* Set TX buffer start page
*/
ed_nic_outb(sc, ED_P0_TPSR, sc->tx_page_start +
sc->txb_next_tx * ED_TXBUF_SIZE);
/*
* Set TX length
*/
ed_nic_outb(sc, ED_P0_TBCR0, len);
ed_nic_outb(sc, ED_P0_TBCR1, len >> 8);
/*
* Set page 0, Remote DMA complete, Transmit Packet, and *Start*
*/
ed_nic_outb(sc, ED_P0_CR, sc->cr_proto | ED_CR_TXP | ED_CR_STA);
sc->xmit_busy = 1;
/*
* Point to next transmit buffer slot and wrap if necessary.
*/
sc->txb_next_tx++;
if (sc->txb_next_tx == sc->txb_cnt)
sc->txb_next_tx = 0;
/*
* Set a timer just in case we never hear from the board again
*/
ifp->if_timer = 2;
}
/*
* Start output on interface.
* We make two assumptions here:
* 1) that the current priority is set to splimp _before_ this code
* is called *and* is returned to the appropriate priority after
* return
* 2) that the IFF_OACTIVE flag is checked before this code is called
* (i.e. that the output part of the interface is idle)
*/
static void
ed_start(ifp)
struct ifnet *ifp;
{
struct ed_softc *sc = ifp->if_softc;
struct mbuf *m0, *m;
caddr_t buffer;
int len;
if (sc->gone) {
printf("ed_start(%p) GONE\n",ifp);
return;
}
outloop:
/*
* First, see if there are buffered packets and an idle transmitter -
* should never happen at this point.
*/
if (sc->txb_inuse && (sc->xmit_busy == 0)) {
printf("ed: packets buffered, but transmitter idle\n");
ed_xmit(sc);
}
/*
* See if there is room to put another packet in the buffer.
*/
if (sc->txb_inuse == sc->txb_cnt) {
/*
* No room. Indicate this to the outside world and exit.
*/
ifp->if_flags |= IFF_OACTIVE;
return;
}
IF_DEQUEUE(&ifp->if_snd, m);
if (m == 0) {
/*
* We are using the !OACTIVE flag to indicate to the outside
* world that we can accept an additional packet rather than
* that the transmitter is _actually_ active. Indeed, the
* transmitter may be active, but if we haven't filled all the
* buffers with data then we still want to accept more.
*/
ifp->if_flags &= ~IFF_OACTIVE;
return;
}
/*
* Copy the mbuf chain into the transmit buffer
*/
m0 = m;
/* txb_new points to next open buffer slot */
buffer = sc->mem_start + (sc->txb_new * ED_TXBUF_SIZE * ED_PAGE_SIZE);
if (sc->mem_shared) {
/*
* Special case setup for 16 bit boards...
*/
if (sc->isa16bit) {
switch (sc->vendor) {
/*
* For 16bit 3Com boards (which have 16k of
* memory), we have the xmit buffers in a
* different page of memory ('page 0') - so
* change pages.
*/
case ED_VENDOR_3COM:
ed_asic_outb(sc, ED_3COM_GACFR,
ED_3COM_GACFR_RSEL);
break;
/*
* Enable 16bit access to shared memory on
* WD/SMC boards.
*/
case ED_VENDOR_WD_SMC:
ed_asic_outb(sc, ED_WD_LAAR,
sc->wd_laar_proto | ED_WD_LAAR_M16EN);
if (sc->chip_type == ED_CHIP_TYPE_WD790) {
ed_asic_outb(sc, ED_WD_MSR, ED_WD_MSR_MENB);
}
break;
}
}
for (len = 0; m != 0; m = m->m_next) {
bcopy(mtod(m, caddr_t), buffer, m->m_len);
buffer += m->m_len;
len += m->m_len;
}
/*
* Restore previous shared memory access
*/
if (sc->isa16bit) {
switch (sc->vendor) {
case ED_VENDOR_3COM:
ed_asic_outb(sc, ED_3COM_GACFR,
ED_3COM_GACFR_RSEL | ED_3COM_GACFR_MBS0);
break;
case ED_VENDOR_WD_SMC:
if (sc->chip_type == ED_CHIP_TYPE_WD790) {
ed_asic_outb(sc, ED_WD_MSR, 0x00);
}
ed_asic_outb(sc, ED_WD_LAAR,
sc->wd_laar_proto & ~ED_WD_LAAR_M16EN);
break;
}
}
} else {
len = ed_pio_write_mbufs(sc, m, (int)buffer);
if (len == 0)
goto outloop;
}
sc->txb_len[sc->txb_new] = max(len, (ETHER_MIN_LEN-ETHER_CRC_LEN));
sc->txb_inuse++;
/*
* Point to next buffer slot and wrap if necessary.
*/
sc->txb_new++;
if (sc->txb_new == sc->txb_cnt)
sc->txb_new = 0;
if (sc->xmit_busy == 0)
ed_xmit(sc);
/*
* Tap off here if there is a bpf listener.
*/
if (ifp->if_bpf) {
bpf_mtap(ifp, m0);
}
m_freem(m0);
/*
* Loop back to the top to possibly buffer more packets
*/
goto outloop;
}
/*
* Ethernet interface receiver interrupt.
*/
static __inline void
ed_rint(sc)
struct ed_softc *sc;
{
struct ifnet *ifp = &sc->arpcom.ac_if;
u_char boundry;
u_short len;
struct ed_ring packet_hdr;
char *packet_ptr;
if (sc->gone)
return;
/*
* Set NIC to page 1 registers to get 'current' pointer
*/
ed_nic_outb(sc, ED_P0_CR, sc->cr_proto | ED_CR_PAGE_1 | ED_CR_STA);
/*
* 'sc->next_packet' is the logical beginning of the ring-buffer -
* i.e. it points to where new data has been buffered. The 'CURR'
* (current) register points to the logical end of the ring-buffer -
* i.e. it points to where additional new data will be added. We loop
* here until the logical beginning equals the logical end (or in
* other words, until the ring-buffer is empty).
*/
while (sc->next_packet != ed_nic_inb(sc, ED_P1_CURR)) {
/* get pointer to this buffer's header structure */
packet_ptr = sc->mem_ring +
(sc->next_packet - sc->rec_page_start) * ED_PAGE_SIZE;
/*
* The byte count includes a 4 byte header that was added by
* the NIC.
*/
if (sc->mem_shared)
packet_hdr = *(struct ed_ring *) packet_ptr;
else
ed_pio_readmem(sc, (int)packet_ptr, (char *) &packet_hdr,
sizeof(packet_hdr));
len = packet_hdr.count;
if (len > (ETHER_MAX_LEN - ETHER_CRC_LEN + sizeof(struct ed_ring)) ||
len < (ETHER_MIN_LEN - ETHER_CRC_LEN + sizeof(struct ed_ring))) {
/*
* Length is a wild value. There's a good chance that
* this was caused by the NIC being old and buggy.
* The bug is that the length low byte is duplicated in
* the high byte. Try to recalculate the length based on
* the pointer to the next packet.
*/
/*
* NOTE: sc->next_packet is pointing at the current packet.
*/
len &= ED_PAGE_SIZE - 1; /* preserve offset into page */
if (packet_hdr.next_packet >= sc->next_packet) {
len += (packet_hdr.next_packet - sc->next_packet) * ED_PAGE_SIZE;
} else {
len += ((packet_hdr.next_packet - sc->rec_page_start) +
(sc->rec_page_stop - sc->next_packet)) * ED_PAGE_SIZE;
}
/*
* because buffers are aligned on 256-byte boundary,
* the length computed above is off by 256 in almost
* all cases. Fix it...
*/
if (len & 0xff)
len -= 256 ;
if (len > (ETHER_MAX_LEN - ETHER_CRC_LEN
+ sizeof(struct ed_ring)))
sc->mibdata.dot3StatsFrameTooLongs++;
}
/*
* Be fairly liberal about what we allow as a "reasonable" length
* so that a [crufty] packet will make it to BPF (and can thus
* be analyzed). Note that all that is really important is that
* we have a length that will fit into one mbuf cluster or less;
* the upper layer protocols can then figure out the length from
* their own length field(s).
* But make sure that we have at least a full ethernet header
* or we would be unable to call ether_input() later.
*/
if ((len >= sizeof(struct ed_ring) + ETHER_HDR_LEN) &&
(len <= MCLBYTES) &&
(packet_hdr.next_packet >= sc->rec_page_start) &&
(packet_hdr.next_packet < sc->rec_page_stop)) {
/*
* Go get packet.
*/
ed_get_packet(sc, packet_ptr + sizeof(struct ed_ring),
len - sizeof(struct ed_ring));
ifp->if_ipackets++;
} else {
/*
* Really BAD. The ring pointers are corrupted.
*/
log(LOG_ERR,
"ed%d: NIC memory corrupt - invalid packet length %d\n",
ifp->if_unit, len);
ifp->if_ierrors++;
ed_reset(ifp);
return;
}
/*
* Update next packet pointer
*/
sc->next_packet = packet_hdr.next_packet;
/*
* Update NIC boundry pointer - being careful to keep it one
* buffer behind. (as recommended by NS databook)
*/
boundry = sc->next_packet - 1;
if (boundry < sc->rec_page_start)
boundry = sc->rec_page_stop - 1;
/*
* Set NIC to page 0 registers to update boundry register
*/
ed_nic_outb(sc, ED_P0_CR, sc->cr_proto | ED_CR_STA);
ed_nic_outb(sc, ED_P0_BNRY, boundry);
/*
* Set NIC to page 1 registers before looping to top (prepare
* to get 'CURR' current pointer)
*/
ed_nic_outb(sc, ED_P0_CR, sc->cr_proto | ED_CR_PAGE_1 | ED_CR_STA);
}
}
/*
* Ethernet interface interrupt processor
*/
void
edintr(arg)
void *arg;
{
struct ed_softc *sc = (struct ed_softc*) arg;
struct ifnet *ifp = (struct ifnet *)sc;
u_char isr;
int count;
if (sc->gone)
return;
/*
* Set NIC to page 0 registers
*/
ed_nic_outb(sc, ED_P0_CR, sc->cr_proto | ED_CR_STA);
/*
* loop until there are no more new interrupts. When the card
* goes away, the hardware will read back 0xff. Looking at
* the interrupts, it would appear that 0xff is impossible,
* or at least extremely unlikely.
*/
while ((isr = ed_nic_inb(sc, ED_P0_ISR)) != 0 && isr != 0xff) {
/*
* reset all the bits that we are 'acknowledging' by writing a
* '1' to each bit position that was set (writing a '1'
* *clears* the bit)
*/
ed_nic_outb(sc, ED_P0_ISR, isr);
/*
* XXX workaround for AX88190
* We limit this to 5000 iterations. At 1us per inb/outb,
* this translates to about 15ms, which should be plenty
* of time, and also gives protection in the card eject
* case.
*/
if (sc->chip_type == ED_CHIP_TYPE_AX88190) {
count = 5000; /* 15ms */
while (count-- && (ed_nic_inb(sc, ED_P0_ISR) & isr)) {
ed_nic_outb(sc, ED_P0_ISR,0);
ed_nic_outb(sc, ED_P0_ISR,isr);
}
if (count == 0)
break;
}
/*
* Handle transmitter interrupts. Handle these first because
* the receiver will reset the board under some conditions.
*/
if (isr & (ED_ISR_PTX | ED_ISR_TXE)) {
u_char collisions = ed_nic_inb(sc, ED_P0_NCR) & 0x0f;
/*
* Check for transmit error. If a TX completed with an
* error, we end up throwing the packet away. Really
* the only error that is possible is excessive
* collisions, and in this case it is best to allow
* the automatic mechanisms of TCP to backoff the
* flow. Of course, with UDP we're screwed, but this
* is expected when a network is heavily loaded.
*/
(void) ed_nic_inb(sc, ED_P0_TSR);
if (isr & ED_ISR_TXE) {
u_char tsr;
/*
* Excessive collisions (16)
*/
tsr = ed_nic_inb(sc, ED_P0_TSR);
if ((tsr & ED_TSR_ABT)
&& (collisions == 0)) {
/*
* When collisions total 16, the
* P0_NCR will indicate 0, and the
* TSR_ABT is set.
*/
collisions = 16;
sc->mibdata.dot3StatsExcessiveCollisions++;
sc->mibdata.dot3StatsCollFrequencies[15]++;
}
if (tsr & ED_TSR_OWC)
sc->mibdata.dot3StatsLateCollisions++;
if (tsr & ED_TSR_CDH)
sc->mibdata.dot3StatsSQETestErrors++;
if (tsr & ED_TSR_CRS)
sc->mibdata.dot3StatsCarrierSenseErrors++;
if (tsr & ED_TSR_FU)
sc->mibdata.dot3StatsInternalMacTransmitErrors++;
/*
* update output errors counter
*/
ifp->if_oerrors++;
} else {
/*
* Update total number of successfully
* transmitted packets.
*/
ifp->if_opackets++;
}
/*
* reset tx busy and output active flags
*/
sc->xmit_busy = 0;
ifp->if_flags &= ~IFF_OACTIVE;
/*
* clear watchdog timer
*/
ifp->if_timer = 0;
/*
* Add in total number of collisions on last
* transmission.
*/
ifp->if_collisions += collisions;
switch(collisions) {
case 0:
case 16:
break;
case 1:
sc->mibdata.dot3StatsSingleCollisionFrames++;
sc->mibdata.dot3StatsCollFrequencies[0]++;
break;
default:
sc->mibdata.dot3StatsMultipleCollisionFrames++;
sc->mibdata.
dot3StatsCollFrequencies[collisions-1]
++;
break;
}
/*
* Decrement buffer in-use count if not zero (can only
* be zero if a transmitter interrupt occured while
* not actually transmitting). If data is ready to
* transmit, start it transmitting, otherwise defer
* until after handling receiver
*/
if (sc->txb_inuse && --sc->txb_inuse)
ed_xmit(sc);
}
/*
* Handle receiver interrupts
*/
if (isr & (ED_ISR_PRX | ED_ISR_RXE | ED_ISR_OVW)) {
/*
* Overwrite warning. In order to make sure that a
* lockup of the local DMA hasn't occurred, we reset
* and re-init the NIC. The NSC manual suggests only a
* partial reset/re-init is necessary - but some chips
* seem to want more. The DMA lockup has been seen
* only with early rev chips - Methinks this bug was
* fixed in later revs. -DG
*/
if (isr & ED_ISR_OVW) {
ifp->if_ierrors++;
#ifdef DIAGNOSTIC
log(LOG_WARNING,
"ed%d: warning - receiver ring buffer overrun\n",
ifp->if_unit);
#endif
/*
* Stop/reset/re-init NIC
*/
ed_reset(ifp);
} else {
/*
* Receiver Error. One or more of: CRC error,
* frame alignment error FIFO overrun, or
* missed packet.
*/
if (isr & ED_ISR_RXE) {
u_char rsr;
rsr = ed_nic_inb(sc, ED_P0_RSR);
if (rsr & ED_RSR_CRC)
sc->mibdata.dot3StatsFCSErrors++;
if (rsr & ED_RSR_FAE)
sc->mibdata.dot3StatsAlignmentErrors++;
if (rsr & ED_RSR_FO)
sc->mibdata.dot3StatsInternalMacReceiveErrors++;
ifp->if_ierrors++;
#ifdef ED_DEBUG
printf("ed%d: receive error %x\n", ifp->if_unit,
ed_nic_inb(sc, ED_P0_RSR));
#endif
}
/*
* Go get the packet(s) XXX - Doing this on an
* error is dubious because there shouldn't be
* any data to get (we've configured the
* interface to not accept packets with
* errors).
*/
/*
* Enable 16bit access to shared memory first
* on WD/SMC boards.
*/
if (sc->isa16bit &&
(sc->vendor == ED_VENDOR_WD_SMC)) {
ed_asic_outb(sc, ED_WD_LAAR,
sc->wd_laar_proto | ED_WD_LAAR_M16EN);
if (sc->chip_type == ED_CHIP_TYPE_WD790) {
ed_asic_outb(sc, ED_WD_MSR,
ED_WD_MSR_MENB);
}
}
ed_rint(sc);
/* disable 16bit access */
if (sc->isa16bit &&
(sc->vendor == ED_VENDOR_WD_SMC)) {
if (sc->chip_type == ED_CHIP_TYPE_WD790) {
ed_asic_outb(sc, ED_WD_MSR, 0x00);
}
ed_asic_outb(sc, ED_WD_LAAR,
sc->wd_laar_proto & ~ED_WD_LAAR_M16EN);
}
}
}
/*
* If it looks like the transmitter can take more data,
* attempt to start output on the interface. This is done
* after handling the receiver to give the receiver priority.
*/
if ((ifp->if_flags & IFF_OACTIVE) == 0)
ed_start(ifp);
/*
* return NIC CR to standard state: page 0, remote DMA
* complete, start (toggling the TXP bit off, even if was just
* set in the transmit routine, is *okay* - it is 'edge'
* triggered from low to high)
*/
ed_nic_outb(sc, ED_P0_CR, sc->cr_proto | ED_CR_STA);
/*
* If the Network Talley Counters overflow, read them to reset
* them. It appears that old 8390's won't clear the ISR flag
* otherwise - resulting in an infinite loop.
*/
if (isr & ED_ISR_CNT) {
(void) ed_nic_inb(sc, ED_P0_CNTR0);
(void) ed_nic_inb(sc, ED_P0_CNTR1);
(void) ed_nic_inb(sc, ED_P0_CNTR2);
}
}
}
/*
* Process an ioctl request. This code needs some work - it looks
* pretty ugly.
*/
static int
ed_ioctl(ifp, command, data)
register struct ifnet *ifp;
u_long command;
caddr_t data;
{
struct ed_softc *sc = ifp->if_softc;
#ifndef ED_NO_MIIBUS
struct ifreq *ifr = (struct ifreq *)data;
struct mii_data *mii;
#endif
int s, error = 0;
if (sc == NULL || sc->gone) {
ifp->if_flags &= ~IFF_RUNNING;
return ENXIO;
}
s = splimp();
switch (command) {
case SIOCSIFADDR:
case SIOCGIFADDR:
case SIOCSIFMTU:
error = ether_ioctl(ifp, command, data);
break;
case SIOCSIFFLAGS:
/*
* If the interface is marked up and stopped, then start it.
* If it is marked down and running, then stop it.
*/
if (ifp->if_flags & IFF_UP) {
if ((ifp->if_flags & IFF_RUNNING) == 0)
ed_init(sc);
} else {
if (ifp->if_flags & IFF_RUNNING) {
ed_stop(sc);
ifp->if_flags &= ~IFF_RUNNING;
}
}
/*
* Promiscuous flag may have changed, so reprogram the RCR.
*/
ed_setrcr(sc);
/*
* An unfortunate hack to provide the (required) software
* control of the tranceiver for 3Com boards. The ALTPHYS flag
* disables the tranceiver if set.
*/
if (sc->vendor == ED_VENDOR_3COM) {
if (ifp->if_flags & IFF_ALTPHYS) {
ed_asic_outb(sc, ED_3COM_CR, 0);
} else {
ed_asic_outb(sc, ED_3COM_CR, ED_3COM_CR_XSEL);
}
} else if (sc->vendor == ED_VENDOR_HP)
ed_hpp_set_physical_link(sc);
break;
case SIOCADDMULTI:
case SIOCDELMULTI:
/*
* Multicast list has changed; set the hardware filter
* accordingly.
*/
ed_setrcr(sc);
error = 0;
break;
#ifndef ED_NO_MIIBUS
case SIOCGIFMEDIA:
case SIOCSIFMEDIA:
if (sc->miibus == NULL) {
error = EINVAL;
break;
}
mii = device_get_softc(sc->miibus);
error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command);
break;
#endif
default:
error = EINVAL;
}
(void) splx(s);
return (error);
}
/*
* Given a source and destination address, copy 'amount' of a packet from
* the ring buffer into a linear destination buffer. Takes into account
* ring-wrap.
*/
static __inline char *
ed_ring_copy(sc, src, dst, amount)
struct ed_softc *sc;
char *src;
char *dst;
u_short amount;
{
u_short tmp_amount;
/* does copy wrap to lower addr in ring buffer? */
if (src + amount > sc->mem_end) {
tmp_amount = sc->mem_end - src;
/* copy amount up to end of NIC memory */
if (sc->mem_shared)
bcopy(src, dst, tmp_amount);
else
ed_pio_readmem(sc, (int)src, dst, tmp_amount);
amount -= tmp_amount;
src = sc->mem_ring;
dst += tmp_amount;
}
if (sc->mem_shared)
bcopy(src, dst, amount);
else
ed_pio_readmem(sc, (int)src, dst, amount);
return (src + amount);
}
/*
* Retreive packet from shared memory and send to the next level up via
* ether_input().
*/
static void
ed_get_packet(sc, buf, len)
struct ed_softc *sc;
char *buf;
u_short len;
{
struct ether_header *eh;
struct mbuf *m;
/* Allocate a header mbuf */
MGETHDR(m, M_DONTWAIT, MT_DATA);
if (m == NULL)
return;
m->m_pkthdr.rcvif = &sc->arpcom.ac_if;
m->m_pkthdr.len = m->m_len = len;
/*
* We always put the received packet in a single buffer -
* either with just an mbuf header or in a cluster attached
* to the header. The +2 is to compensate for the alignment
* fixup below.
*/
if ((len + 2) > MHLEN) {
/* Attach an mbuf cluster */
MCLGET(m, M_DONTWAIT);
/* Insist on getting a cluster */
if ((m->m_flags & M_EXT) == 0) {
m_freem(m);
return;
}
}
/*
* The +2 is to longword align the start of the real packet.
* This is important for NFS.
*/
m->m_data += 2;
eh = mtod(m, struct ether_header *);
/*
* Don't read in the entire packet if we know we're going to drop it
* and no bpf is active.
*/
if (!sc->arpcom.ac_if.if_bpf && BDG_ACTIVE( (&sc->arpcom.ac_if) ) ) {
struct ifnet *bif;
ed_ring_copy(sc, buf, (char *)eh, ETHER_HDR_LEN);
bif = bridge_in_ptr(&sc->arpcom.ac_if, eh) ;
if (bif == BDG_DROP) {
m_freem(m);
return;
}
if (len > ETHER_HDR_LEN)
ed_ring_copy(sc, buf + ETHER_HDR_LEN,
(char *)(eh + 1), len - ETHER_HDR_LEN);
} else
/*
* Get packet, including link layer address, from interface.
*/
ed_ring_copy(sc, buf, (char *)eh, len);
/*
* Remove link layer address.
*/
m->m_pkthdr.len = m->m_len = len - sizeof(struct ether_header);
m->m_data += sizeof(struct ether_header);
ether_input(&sc->arpcom.ac_if, eh, m);
}
/*
* Supporting routines
*/
/*
* Given a NIC memory source address and a host memory destination
* address, copy 'amount' from NIC to host using Programmed I/O.
* The 'amount' is rounded up to a word - okay as long as mbufs
* are word sized.
* This routine is currently Novell-specific.
*/
void
ed_pio_readmem(sc, src, dst, amount)
struct ed_softc *sc;
int src;
unsigned char *dst;
unsigned short amount;
{
/* HP PC Lan+ cards need special handling */
if (sc->vendor == ED_VENDOR_HP && sc->type == ED_TYPE_HP_PCLANPLUS) {
ed_hpp_readmem(sc, src, dst, amount);
return;
}
/* Regular Novell cards */
/* select page 0 registers */
ed_nic_outb(sc, ED_P0_CR, ED_CR_RD2 | ED_CR_STA);
/* round up to a word */
if (amount & 1)
++amount;
/* set up DMA byte count */
ed_nic_outb(sc, ED_P0_RBCR0, amount);
ed_nic_outb(sc, ED_P0_RBCR1, amount >> 8);
/* set up source address in NIC mem */
ed_nic_outb(sc, ED_P0_RSAR0, src);
ed_nic_outb(sc, ED_P0_RSAR1, src >> 8);
ed_nic_outb(sc, ED_P0_CR, ED_CR_RD0 | ED_CR_STA);
if (sc->isa16bit) {
ed_asic_insw(sc, ED_NOVELL_DATA, dst, amount / 2);
} else {
ed_asic_insb(sc, ED_NOVELL_DATA, dst, amount);
}
}
/*
* Stripped down routine for writing a linear buffer to NIC memory.
* Only used in the probe routine to test the memory. 'len' must
* be even.
*/
void
ed_pio_writemem(sc, src, dst, len)
struct ed_softc *sc;
char *src;
unsigned short dst;
unsigned short len;
{
int maxwait = 200; /* about 240us */
/* select page 0 registers */
ed_nic_outb(sc, ED_P0_CR, ED_CR_RD2 | ED_CR_STA);
/* reset remote DMA complete flag */
ed_nic_outb(sc, ED_P0_ISR, ED_ISR_RDC);
/* set up DMA byte count */
ed_nic_outb(sc, ED_P0_RBCR0, len);
ed_nic_outb(sc, ED_P0_RBCR1, len >> 8);
/* set up destination address in NIC mem */
ed_nic_outb(sc, ED_P0_RSAR0, dst);
ed_nic_outb(sc, ED_P0_RSAR1, dst >> 8);
/* set remote DMA write */
ed_nic_outb(sc, ED_P0_CR, ED_CR_RD1 | ED_CR_STA);
if (sc->isa16bit) {
ed_asic_outsw(sc, ED_NOVELL_DATA, src, len / 2);
} else {
ed_asic_outsb(sc, ED_NOVELL_DATA, src, len);
}
/*
* Wait for remote DMA complete. This is necessary because on the
* transmit side, data is handled internally by the NIC in bursts and
* we can't start another remote DMA until this one completes. Not
* waiting causes really bad things to happen - like the NIC
* irrecoverably jamming the ISA bus.
*/
while (((ed_nic_inb(sc, ED_P0_ISR) & ED_ISR_RDC) != ED_ISR_RDC) && --maxwait);
}
/*
* Write an mbuf chain to the destination NIC memory address using
* programmed I/O.
*/
static u_short
ed_pio_write_mbufs(sc, m, dst)
struct ed_softc *sc;
struct mbuf *m;
int dst;
{
struct ifnet *ifp = (struct ifnet *)sc;
unsigned short total_len, dma_len;
struct mbuf *mp;
int maxwait = 200; /* about 240us */
/* HP PC Lan+ cards need special handling */
if (sc->vendor == ED_VENDOR_HP && sc->type == ED_TYPE_HP_PCLANPLUS) {
return ed_hpp_write_mbufs(sc, m, dst);
}
/* Regular Novell cards */
/* First, count up the total number of bytes to copy */
for (total_len = 0, mp = m; mp; mp = mp->m_next)
total_len += mp->m_len;
dma_len = total_len;
if (sc->isa16bit && (dma_len & 1))
dma_len++;
/* select page 0 registers */
ed_nic_outb(sc, ED_P0_CR, ED_CR_RD2 | ED_CR_STA);
/* reset remote DMA complete flag */
ed_nic_outb(sc, ED_P0_ISR, ED_ISR_RDC);
/* set up DMA byte count */
ed_nic_outb(sc, ED_P0_RBCR0, dma_len);
ed_nic_outb(sc, ED_P0_RBCR1, dma_len >> 8);
/* set up destination address in NIC mem */
ed_nic_outb(sc, ED_P0_RSAR0, dst);
ed_nic_outb(sc, ED_P0_RSAR1, dst >> 8);
/* set remote DMA write */
ed_nic_outb(sc, ED_P0_CR, ED_CR_RD1 | ED_CR_STA);
/*
* Transfer the mbuf chain to the NIC memory.
* 16-bit cards require that data be transferred as words, and only words.
* So that case requires some extra code to patch over odd-length mbufs.
*/
if (!sc->isa16bit) {
/* NE1000s are easy */
while (m) {
if (m->m_len) {
ed_asic_outsb(sc, ED_NOVELL_DATA,
m->m_data, m->m_len);
}
m = m->m_next;
}
} else {
/* NE2000s are a pain */
unsigned char *data;
int len, wantbyte;
unsigned char savebyte[2];
wantbyte = 0;
while (m) {
len = m->m_len;
if (len) {
data = mtod(m, caddr_t);
/* finish the last word */
if (wantbyte) {
savebyte[1] = *data;
ed_asic_outw(sc, ED_NOVELL_DATA,
*(u_short *)savebyte);
data++;
len--;
wantbyte = 0;
}
/* output contiguous words */
if (len > 1) {
ed_asic_outsw(sc, ED_NOVELL_DATA,
data, len >> 1);
data += len & ~1;
len &= 1;
}
/* save last byte, if necessary */
if (len == 1) {
savebyte[0] = *data;
wantbyte = 1;
}
}
m = m->m_next;
}
/* spit last byte */
if (wantbyte) {
ed_asic_outw(sc, ED_NOVELL_DATA, *(u_short *)savebyte);
}
}
/*
* Wait for remote DMA complete. This is necessary because on the
* transmit side, data is handled internally by the NIC in bursts and
* we can't start another remote DMA until this one completes. Not
* waiting causes really bad things to happen - like the NIC
* irrecoverably jamming the ISA bus.
*/
while (((ed_nic_inb(sc, ED_P0_ISR) & ED_ISR_RDC) != ED_ISR_RDC) && --maxwait);
if (!maxwait) {
log(LOG_WARNING, "ed%d: remote transmit DMA failed to complete\n",
ifp->if_unit);
ed_reset(ifp);
return(0);
}
return (total_len);
}
/*
* Support routines to handle the HP PC Lan+ card.
*/
/*
* HP PC Lan+: Read from NIC memory, using either PIO or memory mapped
* IO.
*/
static void
ed_hpp_readmem(sc, src, dst, amount)
struct ed_softc *sc;
unsigned short src;
unsigned char *dst;
unsigned short amount;
{
int use_32bit_access = !(sc->hpp_id & ED_HPP_ID_16_BIT_ACCESS);
/* Program the source address in RAM */
ed_asic_outw(sc, ED_HPP_PAGE_2, src);
/*
* The HP PC Lan+ card supports word reads as well as
* a memory mapped i/o port that is aliased to every
* even address on the board.
*/
if (sc->hpp_mem_start) {
/* Enable memory mapped access. */
ed_asic_outw(sc, ED_HPP_OPTION, sc->hpp_options &
~(ED_HPP_OPTION_MEM_DISABLE |
ED_HPP_OPTION_BOOT_ROM_ENB));
if (use_32bit_access && (amount > 3)) {
u_int32_t *dl = (u_int32_t *) dst;
volatile u_int32_t *const sl =
(u_int32_t *) sc->hpp_mem_start;
u_int32_t *const fence = dl + (amount >> 2);
/* Copy out NIC data. We could probably write this
as a `movsl'. The currently generated code is lousy.
*/
while (dl < fence)
*dl++ = *sl;
dst += (amount & ~3);
amount &= 3;
}
/* Finish off any words left, as a series of short reads */
if (amount > 1) {
u_short *d = (u_short *) dst;
volatile u_short *const s =
(u_short *) sc->hpp_mem_start;
u_short *const fence = d + (amount >> 1);
/* Copy out NIC data. */
while (d < fence)
*d++ = *s;
dst += (amount & ~1);
amount &= 1;
}
/*
* read in a byte; however we need to always read 16 bits
* at a time or the hardware gets into a funny state
*/
if (amount == 1) {
/* need to read in a short and copy LSB */
volatile u_short *const s =
(volatile u_short *) sc->hpp_mem_start;
*dst = (*s) & 0xFF;
}
/* Restore Boot ROM access. */
ed_asic_outw(sc, ED_HPP_OPTION, sc->hpp_options);
} else {
/* Read in data using the I/O port */
if (use_32bit_access && (amount > 3)) {
ed_asic_insl(sc, ED_HPP_PAGE_4, dst, amount >> 2);
dst += (amount & ~3);
amount &= 3;
}
if (amount > 1) {
ed_asic_insw(sc, ED_HPP_PAGE_4, dst, amount >> 1);
dst += (amount & ~1);
amount &= 1;
}
if (amount == 1) { /* read in a short and keep the LSB */
*dst = ed_asic_inw(sc, ED_HPP_PAGE_4) & 0xFF;
}
}
}
/*
* HP PC Lan+: Write to NIC memory, using either PIO or memory mapped
* IO.
* Only used in the probe routine to test the memory. 'len' must
* be even.
*/
void
ed_hpp_writemem(sc, src, dst, len)
struct ed_softc *sc;
unsigned char *src;
unsigned short dst;
unsigned short len;
{
/* reset remote DMA complete flag */
ed_nic_outb(sc, ED_P0_ISR, ED_ISR_RDC);
/* program the write address in RAM */
ed_asic_outw(sc, ED_HPP_PAGE_0, dst);
if (sc->hpp_mem_start) {
u_short *s = (u_short *) src;
volatile u_short *d = (u_short *) sc->hpp_mem_start;
u_short *const fence = s + (len >> 1);
/*
* Enable memory mapped access.
*/
ed_asic_outw(sc, ED_HPP_OPTION, sc->hpp_options &
~(ED_HPP_OPTION_MEM_DISABLE |
ED_HPP_OPTION_BOOT_ROM_ENB));
/*
* Copy to NIC memory.
*/
while (s < fence)
*d = *s++;
/*
* Restore Boot ROM access.
*/
ed_asic_outw(sc, ED_HPP_OPTION, sc->hpp_options);
} else {
/* write data using I/O writes */
ed_asic_outsw(sc, ED_HPP_PAGE_4, src, len / 2);
}
}
/*
* Write to HP PC Lan+ NIC memory. Access to the NIC can be by using
* outsw() or via the memory mapped interface to the same register.
* Writes have to be in word units; byte accesses won't work and may cause
* the NIC to behave weirdly. Long word accesses are permitted if the ASIC
* allows it.
*/
static u_short
ed_hpp_write_mbufs(struct ed_softc *sc, struct mbuf *m, int dst)
{
int len, wantbyte;
unsigned short total_len;
unsigned char savebyte[2];
volatile u_short * const d =
(volatile u_short *) sc->hpp_mem_start;
int use_32bit_accesses = !(sc->hpp_id & ED_HPP_ID_16_BIT_ACCESS);
/* select page 0 registers */
ed_nic_outb(sc, ED_P0_CR, sc->cr_proto | ED_CR_STA);
/* reset remote DMA complete flag */
ed_nic_outb(sc, ED_P0_ISR, ED_ISR_RDC);
/* program the write address in RAM */
ed_asic_outw(sc, ED_HPP_PAGE_0, dst);
if (sc->hpp_mem_start) /* enable memory mapped I/O */
ed_asic_outw(sc, ED_HPP_OPTION, sc->hpp_options &
~(ED_HPP_OPTION_MEM_DISABLE |
ED_HPP_OPTION_BOOT_ROM_ENB));
wantbyte = 0;
total_len = 0;
if (sc->hpp_mem_start) { /* Memory mapped I/O port */
while (m) {
total_len += (len = m->m_len);
if (len) {
caddr_t data = mtod(m, caddr_t);
/* finish the last word of the previous mbuf */
if (wantbyte) {
savebyte[1] = *data;
*d = *((ushort *) savebyte);
data++; len--; wantbyte = 0;
}
/* output contiguous words */
if ((len > 3) && (use_32bit_accesses)) {
volatile u_int32_t *const dl =
(volatile u_int32_t *) d;
u_int32_t *sl = (u_int32_t *) data;
u_int32_t *fence = sl + (len >> 2);
while (sl < fence)
*dl = *sl++;
data += (len & ~3);
len &= 3;
}
/* finish off remain 16 bit writes */
if (len > 1) {
u_short *s = (u_short *) data;
u_short *fence = s + (len >> 1);
while (s < fence)
*d = *s++;
data += (len & ~1);
len &= 1;
}
/* save last byte if needed */
if ((wantbyte = (len == 1)) != 0)
savebyte[0] = *data;
}
m = m->m_next; /* to next mbuf */
}
if (wantbyte) /* write last byte */
*d = *((u_short *) savebyte);
} else {
/* use programmed I/O */
while (m) {
total_len += (len = m->m_len);
if (len) {
caddr_t data = mtod(m, caddr_t);
/* finish the last word of the previous mbuf */
if (wantbyte) {
savebyte[1] = *data;
ed_asic_outw(sc, ED_HPP_PAGE_4,
*((u_short *)savebyte));
data++;
len--;
wantbyte = 0;
}
/* output contiguous words */
if ((len > 3) && use_32bit_accesses) {
ed_asic_outsl(sc, ED_HPP_PAGE_4,
data, len >> 2);
data += (len & ~3);
len &= 3;
}
/* finish off remaining 16 bit accesses */
if (len > 1) {
ed_asic_outsw(sc, ED_HPP_PAGE_4,
data, len >> 1);
data += (len & ~1);
len &= 1;
}
if ((wantbyte = (len == 1)) != 0)
savebyte[0] = *data;
} /* if len != 0 */
m = m->m_next;
}
if (wantbyte) /* spit last byte */
ed_asic_outw(sc, ED_HPP_PAGE_4, *(u_short *)savebyte);
}
if (sc->hpp_mem_start) /* turn off memory mapped i/o */
ed_asic_outw(sc, ED_HPP_OPTION, sc->hpp_options);
return (total_len);
}
#ifndef ED_NO_MIIBUS
/*
* MII bus support routines.
*/
int
ed_miibus_readreg(dev, phy, reg)
device_t dev;
int phy, reg;
{
struct ed_softc *sc;
int failed, s, val;
s = splimp();
sc = device_get_softc(dev);
if (sc->gone) {
splx(s);
return (0);
}
(*sc->mii_writebits)(sc, 0xffffffff, 32);
(*sc->mii_writebits)(sc, ED_MII_STARTDELIM, ED_MII_STARTDELIM_BITS);
(*sc->mii_writebits)(sc, ED_MII_READOP, ED_MII_OP_BITS);
(*sc->mii_writebits)(sc, phy, ED_MII_PHY_BITS);
(*sc->mii_writebits)(sc, reg, ED_MII_REG_BITS);
failed = (*sc->mii_readbits)(sc, ED_MII_ACK_BITS);
val = (*sc->mii_readbits)(sc, ED_MII_DATA_BITS);
(*sc->mii_writebits)(sc, ED_MII_IDLE, ED_MII_IDLE_BITS);
splx(s);
return (failed ? 0 : val);
}
void
ed_miibus_writereg(dev, phy, reg, data)
device_t dev;
int phy, reg, data;
{
struct ed_softc *sc;
int s;
s = splimp();
sc = device_get_softc(dev);
if (sc->gone) {
splx(s);
return;
}
(*sc->mii_writebits)(sc, 0xffffffff, 32);
(*sc->mii_writebits)(sc, ED_MII_STARTDELIM, ED_MII_STARTDELIM_BITS);
(*sc->mii_writebits)(sc, ED_MII_WRITEOP, ED_MII_OP_BITS);
(*sc->mii_writebits)(sc, phy, ED_MII_PHY_BITS);
(*sc->mii_writebits)(sc, reg, ED_MII_REG_BITS);
(*sc->mii_writebits)(sc, ED_MII_TURNAROUND, ED_MII_TURNAROUND_BITS);
(*sc->mii_writebits)(sc, data, ED_MII_DATA_BITS);
(*sc->mii_writebits)(sc, ED_MII_IDLE, ED_MII_IDLE_BITS);
splx(s);
}
int
ed_ifmedia_upd(ifp)
struct ifnet *ifp;
{
struct ed_softc *sc;
struct mii_data *mii;
sc = ifp->if_softc;
if (sc->gone || sc->miibus == NULL)
return (ENXIO);
mii = device_get_softc(sc->miibus);
return mii_mediachg(mii);
}
void
ed_ifmedia_sts(ifp, ifmr)
struct ifnet *ifp;
struct ifmediareq *ifmr;
{
struct ed_softc *sc;
struct mii_data *mii;
sc = ifp->if_softc;
if (sc->gone || sc->miibus == NULL)
return;
mii = device_get_softc(sc->miibus);
mii_pollstat(mii);
ifmr->ifm_active = mii->mii_media_active;
ifmr->ifm_status = mii->mii_media_status;
}
void
ed_child_detached(dev, child)
device_t dev;
device_t child;
{
struct ed_softc *sc;
sc = device_get_softc(dev);
if (child == sc->miibus)
sc->miibus = NULL;
}
#endif
static void
ed_setrcr(sc)
struct ed_softc *sc;
{
struct ifnet *ifp = (struct ifnet *)sc;
int i;
u_char reg1;
/* Bit 6 in AX88190 RCR register must be set. */
if (sc->chip_type == ED_CHIP_TYPE_AX88190)
reg1 = ED_RCR_INTT;
else
reg1 = 0x00;
/* set page 1 registers */
ed_nic_outb(sc, ED_P0_CR, sc->cr_proto | ED_CR_PAGE_1 | ED_CR_STP);
if (ifp->if_flags & IFF_PROMISC) {
/*
* Reconfigure the multicast filter.
*/
for (i = 0; i < 8; i++)
ed_nic_outb(sc, ED_P1_MAR(i), 0xff);
/*
* And turn on promiscuous mode. Also enable reception of
* runts and packets with CRC & alignment errors.
*/
/* Set page 0 registers */
ed_nic_outb(sc, ED_P0_CR, sc->cr_proto | ED_CR_STP);
ed_nic_outb(sc, ED_P0_RCR, ED_RCR_PRO | ED_RCR_AM |
ED_RCR_AB | ED_RCR_AR | ED_RCR_SEP | reg1);
} else {
/* set up multicast addresses and filter modes */
if (ifp->if_flags & IFF_MULTICAST) {
u_int32_t mcaf[2];
if (ifp->if_flags & IFF_ALLMULTI) {
mcaf[0] = 0xffffffff;
mcaf[1] = 0xffffffff;
} else
ds_getmcaf(sc, mcaf);
/*
* Set multicast filter on chip.
*/
for (i = 0; i < 8; i++)
ed_nic_outb(sc, ED_P1_MAR(i), ((u_char *) mcaf)[i]);
/* Set page 0 registers */
ed_nic_outb(sc, ED_P0_CR, sc->cr_proto | ED_CR_STP);
ed_nic_outb(sc, ED_P0_RCR, ED_RCR_AM | ED_RCR_AB | reg1);
} else {
/*
* Initialize multicast address hashing registers to
* not accept multicasts.
*/
for (i = 0; i < 8; ++i)
ed_nic_outb(sc, ED_P1_MAR(i), 0x00);
/* Set page 0 registers */
ed_nic_outb(sc, ED_P0_CR, sc->cr_proto | ED_CR_STP);
ed_nic_outb(sc, ED_P0_RCR, ED_RCR_AB | reg1);
}
}
/*
* Start interface.
*/
ed_nic_outb(sc, ED_P0_CR, sc->cr_proto | ED_CR_STA);
}
/*
* Compute crc for ethernet address
*/
static u_int32_t
ds_crc(ep)
u_char *ep;
{
#define POLYNOMIAL 0x04c11db6
register u_int32_t crc = 0xffffffff;
register int carry, i, j;
register u_char b;
for (i = 6; --i >= 0;) {
b = *ep++;
for (j = 8; --j >= 0;) {
carry = ((crc & 0x80000000) ? 1 : 0) ^ (b & 0x01);
crc <<= 1;
b >>= 1;
if (carry)
crc = (crc ^ POLYNOMIAL) | carry;
}
}
return crc;
#undef POLYNOMIAL
}
/*
* Compute the multicast address filter from the
* list of multicast addresses we need to listen to.
*/
static void
ds_getmcaf(sc, mcaf)
struct ed_softc *sc;
u_int32_t *mcaf;
{
register u_int32_t index;
register u_char *af = (u_char *) mcaf;
struct ifmultiaddr *ifma;
mcaf[0] = 0;
mcaf[1] = 0;
TAILQ_FOREACH(ifma, &sc->arpcom.ac_if.if_multiaddrs, ifma_link) {
if (ifma->ifma_addr->sa_family != AF_LINK)
continue;
index = ds_crc(LLADDR((struct sockaddr_dl *)ifma->ifma_addr))
>> 26;
af[index >> 3] |= 1 << (index & 7);
}
}
Reference in New Issue View Git Blame Copy Permalink