freebsd-skq/sys/dev/ofw/ofw_bus_subr.c
Nathan Whitehorn 94b4a038a1 Adapt parts of the sparc64 Open Firmware bus enumeration code (in particular,
the code for parsing interrupt maps) to PowerPC and reflect their new MI
status by moving them to the shared dev/ofw directory.

This commit also modifies the OFW PCI enumeration procedure on PowerPC to
allow the bus to find non-firmware-enumerated devices that Apple likes to add,
and adds some useful Open Firmware properties (compat and name) to the pnpinfo
string of children on OFW SBus, EBus, PCI, and MacIO links. Because of the
change to PCI enumeration on PowerPC, X has started working again on PPC
machines with Grackle hostbridges.

Reviewed by:	marius
Obtained from:	sparc64
2008-12-15 15:31:10 +00:00

280 lines
7.9 KiB
C

/*-
* Copyright (c) 2001 - 2003 by Thomas Moestl <tmm@FreeBSD.org>.
* Copyright (c) 2005 Marius Strobl <marius@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/errno.h>
#include <sys/libkern.h>
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/ofw_bus_subr.h>
#include <dev/ofw/openfirm.h>
#include "ofw_bus_if.h"
int
ofw_bus_gen_setup_devinfo(struct ofw_bus_devinfo *obd, phandle_t node)
{
if (obd == NULL)
return (ENOMEM);
/* The 'name' property is considered mandatory. */
if ((OF_getprop_alloc(node, "name", 1, (void **)&obd->obd_name)) == -1)
return (EINVAL);
OF_getprop_alloc(node, "compatible", 1, (void **)&obd->obd_compat);
OF_getprop_alloc(node, "device_type", 1, (void **)&obd->obd_type);
OF_getprop_alloc(node, "model", 1, (void **)&obd->obd_model);
obd->obd_node = node;
return (0);
}
void
ofw_bus_gen_destroy_devinfo(struct ofw_bus_devinfo *obd)
{
if (obd == NULL)
return;
if (obd->obd_compat != NULL)
free(obd->obd_compat, M_OFWPROP);
if (obd->obd_model != NULL)
free(obd->obd_model, M_OFWPROP);
if (obd->obd_name != NULL)
free(obd->obd_name, M_OFWPROP);
if (obd->obd_type != NULL)
free(obd->obd_type, M_OFWPROP);
}
int
ofw_bus_gen_child_pnpinfo_str(device_t cbdev, device_t child, char *buf,
size_t buflen)
{
if (ofw_bus_get_name(child) != NULL) {
strlcat(buf, "name=", buflen);
strlcat(buf, ofw_bus_get_name(child), buflen);
}
if (ofw_bus_get_compat(child) != NULL) {
strlcat(buf, " compat=", buflen);
strlcat(buf, ofw_bus_get_compat(child), buflen);
}
return (0);
};
const char *
ofw_bus_gen_get_compat(device_t bus, device_t dev)
{
const struct ofw_bus_devinfo *obd;
obd = OFW_BUS_GET_DEVINFO(bus, dev);
if (obd == NULL)
return (NULL);
return (obd->obd_compat);
}
const char *
ofw_bus_gen_get_model(device_t bus, device_t dev)
{
const struct ofw_bus_devinfo *obd;
obd = OFW_BUS_GET_DEVINFO(bus, dev);
if (obd == NULL)
return (NULL);
return (obd->obd_model);
}
const char *
ofw_bus_gen_get_name(device_t bus, device_t dev)
{
const struct ofw_bus_devinfo *obd;
obd = OFW_BUS_GET_DEVINFO(bus, dev);
if (obd == NULL)
return (NULL);
return (obd->obd_name);
}
phandle_t
ofw_bus_gen_get_node(device_t bus, device_t dev)
{
const struct ofw_bus_devinfo *obd;
obd = OFW_BUS_GET_DEVINFO(bus, dev);
if (obd == NULL)
return (0);
return (obd->obd_node);
}
const char *
ofw_bus_gen_get_type(device_t bus, device_t dev)
{
const struct ofw_bus_devinfo *obd;
obd = OFW_BUS_GET_DEVINFO(bus, dev);
if (obd == NULL)
return (NULL);
return (obd->obd_type);
}
static int
ofw_bus_searchprop(phandle_t node, char *propname, void *buf, int buflen)
{
int rv;
for (; node != 0; node = OF_parent(node)) {
if ((rv = OF_getprop(node, propname, buf, buflen)) != -1)
return (rv);
}
return (-1);
}
void
ofw_bus_setup_iinfo(phandle_t node, struct ofw_bus_iinfo *ii, int intrsz)
{
pcell_t addrc;
int msksz;
if (OF_getprop(node, "#address-cells", &addrc, sizeof(addrc)) == -1)
addrc = 2;
ii->opi_addrc = addrc * sizeof(pcell_t);
ii->opi_imapsz = OF_getprop_alloc(node, "interrupt-map", 1,
(void **)&ii->opi_imap);
if (ii->opi_imapsz > 0) {
msksz = OF_getprop_alloc(node, "interrupt-map-mask", 1,
(void **)&ii->opi_imapmsk);
/*
* Failure to get the mask is ignored; a full mask is used then.
* Barf on bad mask sizes, however.
*/
if (msksz != -1 && msksz != ii->opi_addrc + intrsz) {
panic("ofw_bus_setup_iinfo: bad interrupt-map-mask "
"property!");
}
}
}
int
ofw_bus_lookup_imap(phandle_t node, struct ofw_bus_iinfo *ii, void *reg,
int regsz, void *pintr, int pintrsz, void *mintr, int mintrsz,
void *maskbuf)
{
int rv;
if (ii->opi_imapsz <= 0)
return (0);
KASSERT(regsz >= ii->opi_addrc,
("ofw_bus_lookup_imap: register size too small: %d < %d",
regsz, ii->opi_addrc));
rv = OF_getprop(node, "reg", reg, regsz);
if (rv < regsz)
panic("ofw_bus_lookup_imap: could not get reg property");
return (ofw_bus_search_intrmap(pintr, pintrsz, reg, ii->opi_addrc,
ii->opi_imap, ii->opi_imapsz, ii->opi_imapmsk, maskbuf, mintr,
mintrsz));
}
/*
* Map an interrupt using the firmware reg, interrupt-map and
* interrupt-map-mask properties.
* The interrupt property to be mapped must be of size intrsz, and pointed to
* by intr. The regs property of the node for which the mapping is done must
* be passed as regs. This property is an array of register specifications;
* the size of the address part of such a specification must be passed as
* physsz. Only the first element of the property is used.
* imap and imapsz hold the interrupt mask and it's size.
* imapmsk is a pointer to the interrupt-map-mask property, which must have
* a size of physsz + intrsz; it may be NULL, in which case a full mask is
* assumed.
* maskbuf must point to a buffer of length physsz + intrsz.
* The interrupt is returned in result, which must point to a buffer of length
* rintrsz (which gives the expected size of the mapped interrupt).
* Returns 1 if a mapping was found, 0 otherwise.
*/
int
ofw_bus_search_intrmap(void *intr, int intrsz, void *regs, int physsz,
void *imap, int imapsz, void *imapmsk, void *maskbuf, void *result,
int rintrsz)
{
phandle_t parent;
u_int8_t *ref = maskbuf;
u_int8_t *uiintr = intr;
u_int8_t *uiregs = regs;
u_int8_t *uiimapmsk = imapmsk;
u_int8_t *mptr;
pcell_t pintrsz;
int i, rsz, tsz;
rsz = -1;
if (imapmsk != NULL) {
for (i = 0; i < physsz; i++)
ref[i] = uiregs[i] & uiimapmsk[i];
for (i = 0; i < intrsz; i++)
ref[physsz + i] = uiintr[i] & uiimapmsk[physsz + i];
} else {
bcopy(regs, ref, physsz);
bcopy(intr, ref + physsz, intrsz);
}
mptr = imap;
i = imapsz;
tsz = physsz + intrsz + sizeof(phandle_t) + rintrsz;
while (i > 0) {
KASSERT(i >= tsz, ("ofw_bus_search_intrmap: truncated map"));
bcopy(mptr + physsz + intrsz, &parent, sizeof(parent));
if (ofw_bus_searchprop(parent, "#interrupt-cells",
&pintrsz, sizeof(pintrsz)) == -1)
pintrsz = 1; /* default */
pintrsz *= sizeof(pcell_t);
if (pintrsz != rintrsz)
panic("ofw_bus_search_intrmap: expected interrupt cell "
"size incorrect: %d > %d", rintrsz, pintrsz);
/*
* XXX: Apple hardware uses a second cell to set information
* on the interrupt trigger type. This information should
* be used somewhere to program the PIC.
*/
if (bcmp(ref, mptr, physsz + intrsz) == 0) {
bcopy(mptr + physsz + intrsz + sizeof(parent),
result, rintrsz);
return (1);
}
mptr += tsz;
i -= tsz;
}
return (0);
}