322 lines
8.3 KiB
C
322 lines
8.3 KiB
C
/*
|
|
* refclock_pst - clock driver for PSTI/Traconex WWV/WWVH receivers
|
|
*/
|
|
|
|
#ifdef HAVE_CONFIG_H
|
|
#include <config.h>
|
|
#endif
|
|
|
|
#if defined(REFCLOCK) && defined(CLOCK_PST)
|
|
|
|
#include "ntpd.h"
|
|
#include "ntp_io.h"
|
|
#include "ntp_refclock.h"
|
|
#include "ntp_stdlib.h"
|
|
|
|
#include <stdio.h>
|
|
#include <ctype.h>
|
|
|
|
/*
|
|
* This driver supports the PSTI 1010 and Traconex 1020 WWV/WWVH
|
|
* Receivers. No specific claim of accuracy is made for these receiver,
|
|
* but actual experience suggests that 10 ms would be a conservative
|
|
* assumption.
|
|
*
|
|
* The DIPswitches should be set for 9600 bps line speed, 24-hour day-
|
|
* of-year format and UTC time zone. Automatic correction for DST should
|
|
* be disabled. It is very important that the year be set correctly in
|
|
* the DIPswitches; otherwise, the day of year will be incorrect after
|
|
* 28 April of a normal or leap year. The propagation delay DIPswitches
|
|
* should be set according to the distance from the transmitter for both
|
|
* WWV and WWVH, as described in the instructions. While the delay can
|
|
* be set only to within 11 ms, the fudge time1 parameter can be used
|
|
* for vernier corrections.
|
|
*
|
|
* Using the poll sequence QTQDQM, the response timecode is in three
|
|
* sections totalling 50 ASCII printing characters, as concatenated by
|
|
* the driver, in the following format:
|
|
*
|
|
* ahh:mm:ss.fffs<cr> yy/dd/mm/ddd<cr> frdzycchhSSFTttttuuxx<cr>
|
|
*
|
|
* on-time = first <cr>
|
|
* hh:mm:ss.fff = hours, minutes, seconds, milliseconds
|
|
* a = AM/PM indicator (' ' for 24-hour mode)
|
|
* yy = year (from internal switches)
|
|
* dd/mm/ddd = day of month, month, day of year
|
|
* s = daylight-saving indicator (' ' for 24-hour mode)
|
|
* f = frequency enable (O = all frequencies enabled)
|
|
* r = baud rate (3 = 1200, 6 = 9600)
|
|
* d = features indicator (@ = month/day display enabled)
|
|
* z = time zone (0 = UTC)
|
|
* y = year (5 = 91)
|
|
* cc = WWV propagation delay (52 = 22 ms)
|
|
* hh = WWVH propagation delay (81 = 33 ms)
|
|
* SS = status (80 or 82 = operating correctly)
|
|
* F = current receive frequency (4 = 15 MHz)
|
|
* T = transmitter (C = WWV, H = WWVH)
|
|
* tttt = time since last update (0000 = minutes)
|
|
* uu = flush character (03 = ^c)
|
|
* xx = 94 (unknown)
|
|
*
|
|
* The alarm condition is indicated by other than '8' at A, which occurs
|
|
* during initial synchronization and when received signal is lost for
|
|
* an extended period; unlock condition is indicated by other than
|
|
* "0000" in the tttt subfield at Q.
|
|
*
|
|
* Fudge Factors
|
|
*
|
|
* There are no special fudge factors other than the generic.
|
|
*/
|
|
|
|
/*
|
|
* Interface definitions
|
|
*/
|
|
#define DEVICE "/dev/wwv%d" /* device name and unit */
|
|
#define SPEED232 B9600 /* uart speed (9600 baud) */
|
|
#define PRECISION (-10) /* precision assumed (about 1 ms) */
|
|
#define WWVREFID "WWV\0" /* WWV reference ID */
|
|
#define WWVHREFID "WWVH" /* WWVH reference ID */
|
|
#define DESCRIPTION "PSTI/Traconex WWV/WWVH Receiver" /* WRU */
|
|
#define PST_PHI (10e-6) /* max clock oscillator offset */
|
|
#define LENPST 46 /* min timecode length */
|
|
|
|
/*
|
|
* Unit control structure
|
|
*/
|
|
struct pstunit {
|
|
int tcswitch; /* timecode switch */
|
|
char *lastptr; /* pointer to timecode data */
|
|
};
|
|
|
|
/*
|
|
* Function prototypes
|
|
*/
|
|
static int pst_start P((int, struct peer *));
|
|
static void pst_shutdown P((int, struct peer *));
|
|
static void pst_receive P((struct recvbuf *));
|
|
static void pst_poll P((int, struct peer *));
|
|
|
|
/*
|
|
* Transfer vector
|
|
*/
|
|
struct refclock refclock_pst = {
|
|
pst_start, /* start up driver */
|
|
pst_shutdown, /* shut down driver */
|
|
pst_poll, /* transmit poll message */
|
|
noentry, /* not used (old pst_control) */
|
|
noentry, /* initialize driver */
|
|
noentry, /* not used (old pst_buginfo) */
|
|
NOFLAGS /* not used */
|
|
};
|
|
|
|
|
|
/*
|
|
* pst_start - open the devices and initialize data for processing
|
|
*/
|
|
static int
|
|
pst_start(
|
|
int unit,
|
|
struct peer *peer
|
|
)
|
|
{
|
|
register struct pstunit *up;
|
|
struct refclockproc *pp;
|
|
int fd;
|
|
char device[20];
|
|
|
|
/*
|
|
* Open serial port. Use CLK line discipline, if available.
|
|
*/
|
|
(void)sprintf(device, DEVICE, unit);
|
|
if (!(fd = refclock_open(device, SPEED232, LDISC_CLK)))
|
|
return (0);
|
|
|
|
/*
|
|
* Allocate and initialize unit structure
|
|
*/
|
|
if (!(up = (struct pstunit *)emalloc(sizeof(struct pstunit)))) {
|
|
(void) close(fd);
|
|
return (0);
|
|
}
|
|
memset((char *)up, 0, sizeof(struct pstunit));
|
|
pp = peer->procptr;
|
|
pp->io.clock_recv = pst_receive;
|
|
pp->io.srcclock = (caddr_t)peer;
|
|
pp->io.datalen = 0;
|
|
pp->io.fd = fd;
|
|
if (!io_addclock(&pp->io)) {
|
|
(void) close(fd);
|
|
free(up);
|
|
return (0);
|
|
}
|
|
pp->unitptr = (caddr_t)up;
|
|
|
|
/*
|
|
* Initialize miscellaneous variables
|
|
*/
|
|
peer->precision = PRECISION;
|
|
pp->clockdesc = DESCRIPTION;
|
|
memcpy((char *)&pp->refid, WWVREFID, 4);
|
|
peer->burst = MAXSTAGE;
|
|
return (1);
|
|
}
|
|
|
|
|
|
/*
|
|
* pst_shutdown - shut down the clock
|
|
*/
|
|
static void
|
|
pst_shutdown(
|
|
int unit,
|
|
struct peer *peer
|
|
)
|
|
{
|
|
register struct pstunit *up;
|
|
struct refclockproc *pp;
|
|
|
|
pp = peer->procptr;
|
|
up = (struct pstunit *)pp->unitptr;
|
|
io_closeclock(&pp->io);
|
|
free(up);
|
|
}
|
|
|
|
|
|
/*
|
|
* pst_receive - receive data from the serial interface
|
|
*/
|
|
static void
|
|
pst_receive(
|
|
struct recvbuf *rbufp
|
|
)
|
|
{
|
|
register struct pstunit *up;
|
|
struct refclockproc *pp;
|
|
struct peer *peer;
|
|
l_fp trtmp;
|
|
u_long ltemp;
|
|
char ampmchar; /* AM/PM indicator */
|
|
char daychar; /* standard/daylight indicator */
|
|
char junque[10]; /* "yy/dd/mm/" discard */
|
|
char info[14]; /* "frdzycchhSSFT" clock info */
|
|
|
|
/*
|
|
* Initialize pointers and read the timecode and timestamp
|
|
*/
|
|
peer = (struct peer *)rbufp->recv_srcclock;
|
|
pp = peer->procptr;
|
|
up = (struct pstunit *)pp->unitptr;
|
|
up->lastptr += refclock_gtlin(rbufp, up->lastptr, pp->a_lastcode
|
|
+ BMAX - 2 - up->lastptr, &trtmp);
|
|
*up->lastptr++ = ' ';
|
|
*up->lastptr = '\0';
|
|
|
|
/*
|
|
* Note we get a buffer and timestamp for each <cr>, but only
|
|
* the first timestamp is retained.
|
|
*/
|
|
if (up->tcswitch == 0)
|
|
pp->lastrec = trtmp;
|
|
up->tcswitch++;
|
|
pp->lencode = up->lastptr - pp->a_lastcode;
|
|
if (up->tcswitch < 3)
|
|
return;
|
|
|
|
/*
|
|
* We get down to business, check the timecode format and decode
|
|
* its contents. If the timecode has invalid length or is not in
|
|
* proper format, we declare bad format and exit.
|
|
*/
|
|
if (pp->lencode < LENPST) {
|
|
refclock_report(peer, CEVNT_BADREPLY);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Timecode format:
|
|
* "ahh:mm:ss.fffs yy/dd/mm/ddd frdzycchhSSFTttttuuxx"
|
|
*/
|
|
if (sscanf(pp->a_lastcode,
|
|
"%c%2d:%2d:%2d.%3ld%c %9s%3d%13s%4ld",
|
|
&mchar, &pp->hour, &pp->minute, &pp->second, &pp->nsec,
|
|
&daychar, junque, &pp->day, info, <emp) != 10) {
|
|
refclock_report(peer, CEVNT_BADREPLY);
|
|
return;
|
|
}
|
|
pp->nsec *= 1000000;
|
|
|
|
/*
|
|
* Decode synchronization, quality and last update. If
|
|
* unsynchronized, set the leap bits accordingly and exit. Once
|
|
* synchronized, the dispersion depends only on when the clock
|
|
* was last heard, which depends on the time since last update,
|
|
* as reported by the clock.
|
|
*/
|
|
if (info[9] != '8')
|
|
pp->leap = LEAP_NOTINSYNC;
|
|
if (info[12] == 'H')
|
|
memcpy((char *)&pp->refid, WWVHREFID, 4);
|
|
else
|
|
memcpy((char *)&pp->refid, WWVREFID, 4);
|
|
if (peer->stratum <= 1)
|
|
peer->refid = pp->refid;
|
|
if (ltemp == 0)
|
|
pp->lastref = pp->lastrec;
|
|
pp->disp = PST_PHI * ltemp * 60;
|
|
|
|
/*
|
|
* Process the new sample in the median filter and determine the
|
|
* timecode timestamp.
|
|
*/
|
|
if (!refclock_process(pp))
|
|
refclock_report(peer, CEVNT_BADTIME);
|
|
|
|
}
|
|
|
|
|
|
/*
|
|
* pst_poll - called by the transmit procedure
|
|
*/
|
|
static void
|
|
pst_poll(
|
|
int unit,
|
|
struct peer *peer
|
|
)
|
|
{
|
|
register struct pstunit *up;
|
|
struct refclockproc *pp;
|
|
|
|
/*
|
|
* Time to poll the clock. The PSTI/Traconex clock responds to a
|
|
* "QTQDQMT" by returning a timecode in the format specified
|
|
* above. Note there is no checking on state, since this may not
|
|
* be the only customer reading the clock. Only one customer
|
|
* need poll the clock; all others just listen in. If the clock
|
|
* becomes unreachable, declare a timeout and keep going.
|
|
*/
|
|
pp = peer->procptr;
|
|
up = (struct pstunit *)pp->unitptr;
|
|
up->tcswitch = 0;
|
|
up->lastptr = pp->a_lastcode;
|
|
if (write(pp->io.fd, "QTQDQMT", 6) != 6)
|
|
refclock_report(peer, CEVNT_FAULT);
|
|
if (peer->burst > 0)
|
|
return;
|
|
if (pp->coderecv == pp->codeproc) {
|
|
refclock_report(peer, CEVNT_TIMEOUT);
|
|
return;
|
|
}
|
|
refclock_receive(peer);
|
|
record_clock_stats(&peer->srcadr, pp->a_lastcode);
|
|
#ifdef DEBUG
|
|
if (debug)
|
|
printf("pst: timecode %d %s\n", pp->lencode,
|
|
pp->a_lastcode);
|
|
#endif
|
|
peer->burst = MAXSTAGE;
|
|
pp->polls++;
|
|
}
|
|
|
|
#else
|
|
int refclock_pst_int;
|
|
#endif /* REFCLOCK */
|