2e77c5abfb
re-add $ipv6_enable support for backward compatibility. From UPDATING: 1. To use IPv6, simply define $ifconfig_IF_ipv6 like $ifconfig_IF for IPv4. For aliases, $ifconfig_IF_aliasN should be used. Note that both variables need the "inet6" keyword at the head. Do not set $ipv6_network_interfaces manually if you do not understand what you are doing. It is not needed in most cases. $ipv6_ifconfig_IF and $ipv6_ifconfig_IF_aliasN still work, but they are obsolete. 2. $ipv6_enable is obsolete. Use $ipv6_prefer and/or "inet6 accept_rtadv" keyword in ifconfig(8) instead. If you define $ipv6_enable=YES, it means $ipv6_prefer=YES and all configured interfaces have "inet6 accept_rtadv" in the $ifconfig_IF_ipv6. These are for backward compatibility. 3. A new variable $ipv6_prefer has been added. If NO, IPv6 functionality of interfaces with no corresponding $ifconfig_IF_ipv6 is disabled by using "inet6 ifdisabled" flag, and the default address selection policy of ip6addrctl(8) is the IPv4-preferred one (see rc.d/ip6addrctl for more details). Note that if you want to configure IPv6 functionality on the disabled interfaces after boot, first you need to clear the flag by using ifconfig(8) like: ifconfig em0 inet6 -ifdisabled If YES, the default address selection policy is set as IPv6-preferred. The default value of $ipv6_prefer is NO. 4. If your system need to receive Router Advertisement messages, define "inet6 accept_rtadv" in $ifconfig_IF_ipv6. The rc(8) scripts automatically invoke rtsol(8) when the interface becomes UP. The Router Advertisement messages are used for SLAAC (State-Less Address AutoConfiguration).
1370 lines
25 KiB
Plaintext
1370 lines
25 KiB
Plaintext
#
|
|
# Copyright (c) 2003 The FreeBSD Project. All rights reserved.
|
|
#
|
|
# Redistribution and use in source and binary forms, with or without
|
|
# modification, are permitted provided that the following conditions
|
|
# are met:
|
|
# 1. Redistributions of source code must retain the above copyright
|
|
# notice, this list of conditions and the following disclaimer.
|
|
# 2. Redistributions in binary form must reproduce the above copyright
|
|
# notice, this list of conditions and the following disclaimer in the
|
|
# documentation and/or other materials provided with the distribution.
|
|
#
|
|
# THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
|
|
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
# ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
|
|
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
# SUCH DAMAGE.
|
|
#
|
|
# $FreeBSD$
|
|
#
|
|
|
|
#
|
|
# Subroutines commonly used from network startup scripts.
|
|
# Requires that rc.conf be loaded first.
|
|
#
|
|
|
|
# ifn_start ifn
|
|
# Bring up and configure an interface. If some configuration is
|
|
# applied print the interface configuration.
|
|
#
|
|
ifn_start()
|
|
{
|
|
local ifn cfg
|
|
ifn="$1"
|
|
cfg=1
|
|
|
|
[ -z "$ifn" ] && err 1 "ifn_start called without an interface"
|
|
|
|
ifscript_up ${ifn} && cfg=0
|
|
ifconfig_up ${ifn} && cfg=0
|
|
ipv4_up ${ifn} && cfg=0
|
|
ipv6_up ${ifn} && cfg=0
|
|
ipx_up ${ifn} && cfg=0
|
|
childif_create ${ifn} && cfg=0
|
|
|
|
return $cfg
|
|
}
|
|
|
|
# ifn_stop ifn
|
|
# Shutdown and de-configure an interface. If action is taken
|
|
# print the interface name.
|
|
#
|
|
ifn_stop()
|
|
{
|
|
local ifn cfg
|
|
ifn="$1"
|
|
cfg=1
|
|
|
|
[ -z "$ifn" ] && err 1 "ifn_stop called without an interface"
|
|
|
|
ipx_down ${ifn} && cfg=0
|
|
ipv6_down ${ifn} && cfg=0
|
|
ipv4_down ${ifn} && cfg=0
|
|
ifconfig_down ${ifn} && cfg=0
|
|
ifscript_down ${ifn} && cfg=0
|
|
childif_destroy ${ifn} && cfg=0
|
|
|
|
return $cfg
|
|
}
|
|
|
|
# ifconfig_up if
|
|
# Evaluate ifconfig(8) arguments for interface $if and
|
|
# run ifconfig(8) with those arguments. It returns 0 if
|
|
# arguments were found and executed or 1 if the interface
|
|
# had no arguments. Pseudo arguments DHCP and WPA are handled
|
|
# here.
|
|
#
|
|
ifconfig_up()
|
|
{
|
|
local _cfg _ipv6_opts ifconfig_args
|
|
_cfg=1
|
|
|
|
# ifconfig_IF
|
|
ifconfig_args=`ifconfig_getargs $1`
|
|
if [ -n "${ifconfig_args}" ]; then
|
|
ifconfig $1 ${ifconfig_args}
|
|
_cfg=0
|
|
fi
|
|
|
|
# inet6 specific
|
|
if afexists inet6; then
|
|
if ipv6if $1; then
|
|
if checkyesno ipv6_gateway_enable; then
|
|
_ipv6_opts="-accept_rtadv"
|
|
fi
|
|
else
|
|
if checkyesno ipv6_prefer; then
|
|
_ipv6_opts="-ifdisabled"
|
|
else
|
|
_ipv6_opts="ifdisabled"
|
|
fi
|
|
|
|
# backward compatibility: $ipv6_enable
|
|
case $ipv6_enable in
|
|
[Yy][Ee][Ss])
|
|
_ipv6_opts="${_ipv6_opts} accept_rtadv"
|
|
;;
|
|
esac
|
|
fi
|
|
|
|
if [ -n "${_ipv6_opts}" ]; then
|
|
ifconfig $1 inet6 ${_ipv6_opts}
|
|
fi
|
|
|
|
# ifconfig_IF_ipv6
|
|
ifconfig_args=`ifconfig_getargs $1 ipv6`
|
|
if [ -n "${ifconfig_args}" ]; then
|
|
ifconfig $1 inet6 -ifdisabled
|
|
ifconfig $1 ${ifconfig_args}
|
|
_cfg=0
|
|
fi
|
|
|
|
# backward compatiblity: $ipv6_ifconfig_IF
|
|
ifconfig_args=`get_if_var $1 ipv6_ifconfig_IF`
|
|
if [ -n "${ifconfig_args}" ]; then
|
|
warn "\$ipv6_ifconfig_$1 is obsolete." \
|
|
" Use ifconfig_$1_ipv6 instead."
|
|
ifconfig $1 inet6 -ifdisabled
|
|
ifconfig $1 inet6 ${ifconfig_args}
|
|
_cfg=0
|
|
fi
|
|
fi
|
|
|
|
if [ ${_cfg} -eq 0 ]; then
|
|
ifconfig $1 up
|
|
fi
|
|
|
|
if wpaif $1; then
|
|
/etc/rc.d/wpa_supplicant start $1
|
|
_cfg=0 # XXX: not sure this should count
|
|
fi
|
|
|
|
if dhcpif $1; then
|
|
if [ $_cfg -ne 0 ] ; then
|
|
ifconfig $1 up
|
|
fi
|
|
if syncdhcpif $1; then
|
|
/etc/rc.d/dhclient start $1
|
|
fi
|
|
_cfg=0
|
|
fi
|
|
|
|
return $_cfg
|
|
}
|
|
|
|
# ifconfig_down if
|
|
# returns 1 if wpa_supplicant or dhclient was stopped or
|
|
# the interface exists.
|
|
#
|
|
ifconfig_down()
|
|
{
|
|
local _cfg
|
|
_cfg=1
|
|
|
|
if wpaif $1; then
|
|
/etc/rc.d/wpa_supplicant stop $1
|
|
_cfg=0
|
|
fi
|
|
|
|
if dhcpif $1; then
|
|
/etc/rc.d/dhclient stop $1
|
|
_cfg=0
|
|
fi
|
|
|
|
if ifexists $1; then
|
|
ifconfig $1 down
|
|
_cfg=0
|
|
fi
|
|
|
|
return $_cfg
|
|
}
|
|
|
|
# get_if_var if var [default]
|
|
# Return the value of the pseudo-hash corresponding to $if where
|
|
# $var is a string containg the sub-string "IF" which will be
|
|
# replaced with $if after the characters defined in _punct are
|
|
# replaced with '_'. If the variable is unset, replace it with
|
|
# $default if given.
|
|
get_if_var()
|
|
{
|
|
local _if _punct _var _default prefix suffix
|
|
|
|
if [ $# -ne 2 -a $# -ne 3 ]; then
|
|
err 3 'USAGE: get_if_var name var [default]'
|
|
fi
|
|
|
|
_if=$1
|
|
_punct=". - / +"
|
|
for _punct_c in $_punct; do
|
|
_if=`ltr ${_if} ${_punct_c} '_'`
|
|
done
|
|
_var=$2
|
|
_default=$3
|
|
|
|
prefix=${_var%%IF*}
|
|
suffix=${_var##*IF}
|
|
eval echo \${${prefix}${_if}${suffix}-${_default}}
|
|
}
|
|
|
|
# _ifconfig_getargs if [af]
|
|
# Echos the arguments for the supplied interface to stdout.
|
|
# returns 1 if empty. In general, ifconfig_getargs should be used
|
|
# outside this file.
|
|
_ifconfig_getargs()
|
|
{
|
|
local _ifn _af
|
|
_ifn=$1
|
|
_af=${2+_$2}
|
|
|
|
if [ -z "$_ifn" ]; then
|
|
return 1
|
|
fi
|
|
|
|
get_if_var $_ifn ifconfig_IF$_af "$ifconfig_DEFAULT"
|
|
}
|
|
|
|
# ifconfig_getargs if [af]
|
|
# Takes the result from _ifconfig_getargs and removes pseudo
|
|
# args such as DHCP and WPA.
|
|
ifconfig_getargs()
|
|
{
|
|
local _tmpargs _arg _args
|
|
_tmpargs=`_ifconfig_getargs $1 $2`
|
|
if [ $? -eq 1 ]; then
|
|
return 1
|
|
fi
|
|
_args=
|
|
|
|
for _arg in $_tmpargs; do
|
|
case $_arg in
|
|
[Dd][Hh][Cc][Pp]) ;;
|
|
[Nn][Oo][Aa][Uu][Tt][Oo]) ;;
|
|
[Nn][Oo][Ss][Yy][Nn][Cc][Dd][Hh][Cc][Pp]) ;;
|
|
[Ss][Yy][Nn][Cc][Dd][Hh][Cc][Pp]) ;;
|
|
[Ww][Pp][Aa]) ;;
|
|
*)
|
|
_args="$_args $_arg"
|
|
;;
|
|
esac
|
|
done
|
|
|
|
echo $_args
|
|
}
|
|
|
|
# autoif
|
|
# Returns 0 if the interface should be automaticly configured at
|
|
# boot time and 1 otherwise.
|
|
autoif()
|
|
{
|
|
local _tmpargs _arg
|
|
_tmpargs=`_ifconfig_getargs $1`
|
|
|
|
for _arg in $_tmpargs; do
|
|
case $_arg in
|
|
[Nn][Oo][Aa][Uu][Tt][Oo])
|
|
return 1
|
|
;;
|
|
esac
|
|
done
|
|
|
|
return 0
|
|
}
|
|
|
|
# dhcpif if
|
|
# Returns 0 if the interface is a DHCP interface and 1 otherwise.
|
|
dhcpif()
|
|
{
|
|
local _tmpargs _arg
|
|
_tmpargs=`_ifconfig_getargs $1`
|
|
|
|
for _arg in $_tmpargs; do
|
|
case $_arg in
|
|
[Dd][Hh][Cc][Pp])
|
|
return 0
|
|
;;
|
|
[Nn][Oo][Ss][Yy][Nn][Cc][Dd][Hh][Cc][Pp])
|
|
return 0
|
|
;;
|
|
[Ss][Yy][Nn][Cc][Dd][Hh][Cc][Pp])
|
|
return 0
|
|
;;
|
|
esac
|
|
done
|
|
|
|
return 1
|
|
}
|
|
|
|
# syncdhcpif
|
|
# Returns 0 if the interface should be configured synchronously and
|
|
# 1 otherwise.
|
|
syncdhcpif()
|
|
{
|
|
local _tmpargs _arg
|
|
_tmpargs=`_ifconfig_getargs $1`
|
|
|
|
for _arg in $_tmpargs; do
|
|
case $_arg in
|
|
[Nn][Oo][Ss][Yy][Nn][Cc][Dd][Hh][Cc][Pp])
|
|
return 1
|
|
;;
|
|
[Ss][Yy][Nn][Cc][Dd][Hh][Cc][Pp])
|
|
return 0
|
|
;;
|
|
esac
|
|
done
|
|
|
|
checkyesno synchronous_dhclient
|
|
}
|
|
|
|
# wpaif if
|
|
# Returns 0 if the interface is a WPA interface and 1 otherwise.
|
|
wpaif()
|
|
{
|
|
local _tmpargs _arg
|
|
_tmpargs=`_ifconfig_getargs $1`
|
|
|
|
for _arg in $_tmpargs; do
|
|
case $_arg in
|
|
[Ww][Pp][Aa])
|
|
return 0
|
|
;;
|
|
esac
|
|
done
|
|
|
|
return 1
|
|
}
|
|
|
|
# afexists af
|
|
# Returns 0 if the address family is enabled in the kernel
|
|
# 1 otherwise.
|
|
afexists()
|
|
{
|
|
local _af
|
|
_af=$1
|
|
|
|
case ${_af} in
|
|
inet)
|
|
${SYSCTL_N} net.inet > /dev/null 2>&1
|
|
;;
|
|
inet6)
|
|
${SYSCTL_N} net.inet6 > /dev/null 2>&1
|
|
;;
|
|
*)
|
|
err 1 "afexists(): Unsupported address family: $_af"
|
|
;;
|
|
esac
|
|
}
|
|
|
|
# noafif if
|
|
# Returns 0 if the interface has no af configuration and 1 otherwise.
|
|
noafif()
|
|
{
|
|
local _if
|
|
_if=$1
|
|
|
|
case $_if in
|
|
pflog[0-9]*|\
|
|
pfsync[0-9]*|\
|
|
an[0-9]*|\
|
|
ath[0-9]*|\
|
|
ipw[0-9]*|\
|
|
iwi[0-9]*|\
|
|
iwn[0-9]*|\
|
|
ral[0-9]*|\
|
|
wi[0-9]*|\
|
|
wl[0-9]*|\
|
|
wpi[0-9]*)
|
|
return 0
|
|
;;
|
|
esac
|
|
|
|
return 1
|
|
}
|
|
|
|
# ipv6if if
|
|
# Returns 0 if the interface should be configured for IPv6 and
|
|
# 1 otherwise.
|
|
ipv6if()
|
|
{
|
|
local _if _tmpargs i
|
|
_if=$1
|
|
|
|
if ! afexists inet6; then
|
|
return 1
|
|
fi
|
|
|
|
# lo0 is always IPv6-enabled
|
|
case $_if in
|
|
lo0)
|
|
return 0
|
|
;;
|
|
esac
|
|
|
|
# True if $ifconfig_IF_ipv6 is defined.
|
|
_tmpargs=`_ifconfig_getargs $_if ipv6`
|
|
if [ -n "${_tmpargs}" ]; then
|
|
return 0
|
|
fi
|
|
|
|
# backward compatibility: True if $ipv6_ifconfig_IF is defined.
|
|
_tmpargs=`get_if_var $_if ipv6_ifconfig_IF`
|
|
if [ -n "${_tmpargs}" ]; then
|
|
return 0
|
|
fi
|
|
|
|
case "${ipv6_network_interfaces}" in
|
|
[Aa][Uu][Tt][Oo])
|
|
return 0
|
|
;;
|
|
''|[Nn][Oo][Nn][Ee])
|
|
return 1
|
|
;;
|
|
esac
|
|
|
|
for i in ${ipv6_network_interfaces}; do
|
|
if [ "$i" = "$_if" ]; then
|
|
return 0
|
|
fi
|
|
done
|
|
|
|
return 1
|
|
}
|
|
|
|
# ipv6_autoconfif if
|
|
# Returns 0 if the interface should be configured for IPv6 with
|
|
# Stateless Address Configuration, 1 otherwise.
|
|
ipv6_autoconfif()
|
|
{
|
|
local _if _tmpargs _arg
|
|
_if=$1
|
|
|
|
if ! ipv6if $_if; then
|
|
return 1
|
|
fi
|
|
if noafif $_if; then
|
|
return 1
|
|
fi
|
|
if checkyesno ipv6_gateway_enable; then
|
|
return 1
|
|
fi
|
|
_tmpargs=`get_if_var $_if ipv6_prefix_IF`
|
|
if [ -n "${_tmpargs}" ]; then
|
|
return 1
|
|
fi
|
|
|
|
case $_if in
|
|
lo0|\
|
|
stf[0-9]*|\
|
|
faith[0-9]*|\
|
|
lp[0-9]*|\
|
|
sl[0-9]*|\
|
|
pflog[0-9]*|\
|
|
pfsync[0-9]*)
|
|
return 1
|
|
;;
|
|
esac
|
|
|
|
# backward compatibility: $ipv6_enable
|
|
case $ipv6_enable in
|
|
[Yy][Ee][Ss])
|
|
return 0
|
|
;;
|
|
esac
|
|
|
|
_tmpargs=`_ifconfig_getargs $_if ipv6`
|
|
for _arg in $_tmpargs; do
|
|
case $_arg in
|
|
accept_rtadv)
|
|
return 0
|
|
;;
|
|
esac
|
|
done
|
|
|
|
# backward compatibility: $ipv6_ifconfig_IF
|
|
_tmpargs=`get_if_var $_if ipv6_ifconfig_IF`
|
|
for _arg in $_tmpargs; do
|
|
case $_arg in
|
|
accept_rtadv)
|
|
return 0
|
|
;;
|
|
esac
|
|
done
|
|
|
|
return 1
|
|
}
|
|
|
|
# ifexists if
|
|
# Returns 0 if the interface exists and 1 otherwise.
|
|
ifexists()
|
|
{
|
|
[ -z "$1" ] && return 1
|
|
ifconfig -n $1 > /dev/null 2>&1
|
|
}
|
|
|
|
# ipv4_up if
|
|
# add IPv4 addresses to the interface $if
|
|
ipv4_up()
|
|
{
|
|
local _if _ret
|
|
_if=$1
|
|
_ret=1
|
|
|
|
ifalias_up ${_if} inet && _ret=0
|
|
ipv4_addrs_common ${_if} alias && _ret=0
|
|
|
|
return $_ret
|
|
}
|
|
|
|
# ipv6_up if
|
|
# add IPv6 addresses to the interface $if
|
|
ipv6_up()
|
|
{
|
|
local _if _ret
|
|
_if=$1
|
|
_ret=1
|
|
|
|
if ! ipv6if $_if; then
|
|
return 0
|
|
fi
|
|
|
|
ifalias_up ${_if} inet6 && _ret=0
|
|
ipv6_prefix_hostid_addr_up ${_if} && _ret=0
|
|
ipv6_accept_rtadv_up ${_if} && _ret=0
|
|
|
|
# wait for DAD
|
|
sleep `${SYSCTL_N} net.inet6.ip6.dad_count`
|
|
sleep 1
|
|
|
|
return $_ret
|
|
}
|
|
|
|
# ipv4_down if
|
|
# remove IPv4 addresses from the interface $if
|
|
ipv4_down()
|
|
{
|
|
local _if _ifs _ret inetList oldifs _inet
|
|
_if=$1
|
|
_ifs="^"
|
|
_ret=1
|
|
|
|
inetList="`ifconfig ${_if} | grep 'inet ' | tr "\n" "$_ifs"`"
|
|
|
|
oldifs="$IFS"
|
|
IFS="$_ifs"
|
|
for _inet in $inetList ; do
|
|
# get rid of extraneous line
|
|
[ -z "$_inet" ] && break
|
|
|
|
_inet=`expr "$_inet" : '.*\(inet \([0-9]\{1,3\}\.\)\{3\}[0-9]\{1,3\}\).*'`
|
|
|
|
IFS="$oldifs"
|
|
ifconfig ${_if} ${_inet} delete
|
|
IFS="$_ifs"
|
|
_ret=0
|
|
done
|
|
IFS="$oldifs"
|
|
|
|
ifalias_down ${_if} inet && _ret=0
|
|
ipv4_addrs_common ${_if} -alias && _ret=0
|
|
|
|
return $_ret
|
|
}
|
|
|
|
# ipv6_down if
|
|
# remove IPv6 addresses from the interface $if
|
|
ipv6_down()
|
|
{
|
|
local _if _ifs _ret inetList oldifs _inet6
|
|
_if=$1
|
|
_ifs="^"
|
|
_ret=1
|
|
|
|
if ! ipv6if $_if; then
|
|
return 0
|
|
fi
|
|
|
|
ipv6_accept_rtadv_down ${_if} && _ret=0
|
|
ifalias_down ${_if} inet6 && _ret=0
|
|
|
|
inetList="`ifconfig ${_if} | grep 'inet6 ' | tr "\n" "$_ifs"`"
|
|
|
|
oldifs="$IFS"
|
|
IFS="$_ifs"
|
|
for _inet6 in $inetList ; do
|
|
# get rid of extraneous line
|
|
[ -z "$_inet6" ] && break
|
|
|
|
_inet6=`expr "$_inet6" : '.*\(inet6 \([0-9a-f:]*\)\).*'`
|
|
|
|
IFS="$oldifs"
|
|
ifconfig ${_if} ${_inet6} -alias
|
|
IFS="$_ifs"
|
|
_ret=0
|
|
done
|
|
IFS="$oldifs"
|
|
|
|
return $_ret
|
|
}
|
|
|
|
# ipv4_addrs_common if action
|
|
# Evaluate the ifconfig_if_ipv4 arguments for interface $if and
|
|
# use $action to add or remove IPv4 addresses from $if.
|
|
ipv4_addrs_common()
|
|
{
|
|
local _ret _if _action _cidr _cidr_addr
|
|
local _ipaddr _netmask _range _ipnet _iplow _iphigh _ipcount
|
|
_ret=1
|
|
_if=$1
|
|
_action=$2
|
|
|
|
# get ipv4-addresses
|
|
cidr_addr=`get_if_var $_if ipv4_addrs_IF`
|
|
|
|
for _cidr in ${cidr_addr}; do
|
|
_ipaddr=${_cidr%%/*}
|
|
_netmask="/"${_cidr##*/}
|
|
_range=${_ipaddr##*.}
|
|
_ipnet=${_ipaddr%.*}
|
|
_iplow=${_range%-*}
|
|
_iphigh=${_range#*-}
|
|
|
|
# clear netmask when removing aliases
|
|
if [ "${_action}" = "-alias" ]; then
|
|
_netmask=""
|
|
fi
|
|
|
|
_ipcount=${_iplow}
|
|
while [ "${_ipcount}" -le "${_iphigh}" ]; do
|
|
eval "ifconfig ${_if} ${_action} ${_ipnet}.${_ipcount}${_netmask}"
|
|
_ipcount=$((${_ipcount}+1))
|
|
_ret=0
|
|
|
|
# only the first ipaddr in a subnet need the real netmask
|
|
if [ "${_action}" != "-alias" ]; then
|
|
_netmask="/32"
|
|
fi
|
|
done
|
|
done
|
|
|
|
return $_ret
|
|
}
|
|
|
|
# ifalias_up if af
|
|
# Configure aliases for network interface $if.
|
|
# It returns 0 if at least one alias was configured or
|
|
# 1 if there were none.
|
|
#
|
|
ifalias_up()
|
|
{
|
|
local _ret
|
|
_ret=1
|
|
|
|
case "$2" in
|
|
inet)
|
|
_ret=`ifalias_ipv4_up "$1"`
|
|
;;
|
|
inet6)
|
|
_ret=`ifalias_ipv6_up "$1"`
|
|
;;
|
|
esac
|
|
|
|
return $_ret
|
|
}
|
|
|
|
# ifalias_ipv4_up if
|
|
# Helper function for ifalias_up(). Handles IPv4.
|
|
#
|
|
ifalias_ipv4_up()
|
|
{
|
|
local _ret alias ifconfig_args
|
|
_ret=1
|
|
|
|
# ifconfig_IF_aliasN which starts with "inet"
|
|
alias=0
|
|
while : ; do
|
|
ifconfig_args=`get_if_var $1 ifconfig_IF_alias${alias}`
|
|
case "${ifconfig_args}" in
|
|
inet\ *)
|
|
ifconfig $1 ${ifconfig_args} alias && _ret=0
|
|
;;
|
|
"")
|
|
break
|
|
;;
|
|
esac
|
|
alias=$((${alias} + 1))
|
|
done
|
|
|
|
return $_ret
|
|
}
|
|
|
|
# ifalias_ipv6_up if
|
|
# Helper function for ifalias_up(). Handles IPv6.
|
|
#
|
|
ifalias_ipv6_up()
|
|
{
|
|
local _ret alias ifconfig_args
|
|
_ret=1
|
|
|
|
# ifconfig_IF_aliasN which starts with "inet6"
|
|
alias=0
|
|
while : ; do
|
|
ifconfig_args=`get_if_var $1 ifconfig_IF_alias${alias}`
|
|
case "${ifconfig_args}" in
|
|
inet6\ *)
|
|
ifconfig $1 ${ifconfig_args} alias && _ret=0
|
|
;;
|
|
"")
|
|
break
|
|
;;
|
|
esac
|
|
alias=$((${alias} + 1))
|
|
done
|
|
|
|
# backward compatibility: ipv6_ifconfig_IF_aliasN.
|
|
alias=0
|
|
while : ; do
|
|
ifconfig_args=`get_if_var $1 ipv6_ifconfig_IF_alias${alias}`
|
|
case "${ifconfig_args}" in
|
|
"")
|
|
break
|
|
;;
|
|
*)
|
|
ifconfig $1 inet6 ${ifconfig_args} alias && _ret=0
|
|
warn "\$ipv6_ifconfig_$1_alias${alias} is obsolete." \
|
|
" Use ifconfig_$1_aliasN instead."
|
|
;;
|
|
esac
|
|
alias=$((${alias} + 1))
|
|
done
|
|
|
|
return $_ret
|
|
}
|
|
|
|
# ifalias_down if af
|
|
# Remove aliases for network interface $if.
|
|
# It returns 0 if at least one alias was removed or
|
|
# 1 if there were none.
|
|
#
|
|
ifalias_down()
|
|
{
|
|
local _ret
|
|
_ret=1
|
|
|
|
case "$2" in
|
|
inet)
|
|
_ret=`ifalias_ipv4_down "$1"`
|
|
;;
|
|
inet6)
|
|
_ret=`ifalias_ipv6_down "$1"`
|
|
;;
|
|
esac
|
|
|
|
return $_ret
|
|
}
|
|
|
|
# ifalias_ipv4_down if
|
|
# Helper function for ifalias_down(). Handles IPv4.
|
|
#
|
|
ifalias_ipv4_down()
|
|
{
|
|
local _ret alias ifconfig_args
|
|
_ret=1
|
|
|
|
# ifconfig_IF_aliasN which starts with "inet"
|
|
alias=0
|
|
while : ; do
|
|
ifconfig_args=`get_if_var $1 ifconfig_IF_alias${alias}`
|
|
case "${ifconfig_args}" in
|
|
inet\ *)
|
|
ifconfig $1 ${ifconfig_args} -alias && _ret=0
|
|
;;
|
|
"")
|
|
break
|
|
;;
|
|
esac
|
|
alias=$((${alias} + 1))
|
|
done
|
|
|
|
return $_ret
|
|
}
|
|
|
|
# ifalias_ipv6_down if
|
|
# Helper function for ifalias_down(). Handles IPv6.
|
|
#
|
|
ifalias_ipv6_down()
|
|
{
|
|
local _ret alias ifconfig_args
|
|
_ret=1
|
|
|
|
# ifconfig_IF_aliasN which starts with "inet6"
|
|
alias=0
|
|
while : ; do
|
|
ifconfig_args=`get_if_var $1 ifconfig_IF_alias${alias}`
|
|
case "${ifconfig_args}" in
|
|
inet6\ *)
|
|
ifconfig $1 ${ifconfig_args} -alias && _ret=0
|
|
;;
|
|
"")
|
|
break
|
|
;;
|
|
esac
|
|
alias=$((${alias} + 1))
|
|
done
|
|
|
|
# backward compatibility: ipv6_ifconfig_IF_aliasN.
|
|
alias=0
|
|
while : ; do
|
|
ifconfig_args=`get_if_var $1 ipv6_ifconfig_IF_alias${alias}`
|
|
case "${ifconfig_args}" in
|
|
"")
|
|
break
|
|
;;
|
|
*)
|
|
ifconfig $1 inet6 ${ifconfig_args} -alias && _ret=0
|
|
warn "\$ipv6_ifconfig_$1_alias${alias} is obsolete." \
|
|
" Use ifconfig_$1_aliasN instead."
|
|
;;
|
|
esac
|
|
alias=$((${alias} + 1))
|
|
done
|
|
|
|
return $_ret
|
|
}
|
|
|
|
# ipv6_prefix_hostid_addr_up if
|
|
# add IPv6 prefix + hostid addr to the interface $if
|
|
ipv6_prefix_hostid_addr_up()
|
|
{
|
|
local _if prefix laddr hostid j address
|
|
_if=$1
|
|
prefix=`get_if_var ${_if} ipv6_prefix_IF`
|
|
|
|
if [ -n "${prefix}" ]; then
|
|
laddr=`network6_getladdr ${_if}`
|
|
hostid=${laddr#fe80::}
|
|
hostid=${hostid%\%*}
|
|
|
|
for j in ${prefix}; do
|
|
address=$j\:${hostid}
|
|
ifconfig ${_if} inet6 ${address} prefixlen 64 alias
|
|
|
|
# if I am a router, add subnet router
|
|
# anycast address (RFC 2373).
|
|
if checkyesno ipv6_gateway_enable; then
|
|
ifconfig ${_if} inet6 $j:: prefixlen 64 \
|
|
alias anycast
|
|
fi
|
|
done
|
|
fi
|
|
}
|
|
|
|
# ipv6_accept_rtadv_up if
|
|
# Enable accepting Router Advertisement and send Router
|
|
# Solicitation message
|
|
ipv6_accept_rtadv_up()
|
|
{
|
|
if ipv6_autoconfif $1; then
|
|
ifconfig $1 inet6 accept_rtadv up
|
|
rtsol ${rtsol_flags} $1
|
|
fi
|
|
}
|
|
|
|
# ipv6_accept_rtadv_down if
|
|
# Disable accepting Router Advertisement
|
|
ipv6_accept_rtadv_down()
|
|
{
|
|
if ipv6_autoconfif $1; then
|
|
ifconfig $1 inet6 -accept_rtadv
|
|
fi
|
|
}
|
|
|
|
# ifscript_up if
|
|
# Evaluate a startup script for the $if interface.
|
|
# It returns 0 if a script was found and processed or
|
|
# 1 if no script was found.
|
|
#
|
|
ifscript_up()
|
|
{
|
|
if [ -r /etc/start_if.$1 ]; then
|
|
. /etc/start_if.$1
|
|
return 0
|
|
else
|
|
return 1
|
|
fi
|
|
}
|
|
|
|
# ifscript_down if
|
|
# Evaluate a shutdown script for the $if interface.
|
|
# It returns 0 if a script was found and processed or
|
|
# 1 if no script was found.
|
|
#
|
|
ifscript_down()
|
|
{
|
|
if [ -r /etc/stop_if.$1 ]; then
|
|
. /etc/stop_if.$1
|
|
return 0
|
|
else
|
|
return 1
|
|
fi
|
|
}
|
|
|
|
# clone_up
|
|
# Create cloneable interfaces.
|
|
#
|
|
clone_up()
|
|
{
|
|
local _prefix _list ifn
|
|
_prefix=
|
|
_list=
|
|
|
|
# create_args_IF
|
|
for ifn in ${cloned_interfaces}; do
|
|
ifconfig ${ifn} create `get_if_var ${ifn} create_args_IF`
|
|
if [ $? -eq 0 ]; then
|
|
_list="${_list}${_prefix}${ifn}"
|
|
[ -z "$_prefix" ] && _prefix=' '
|
|
fi
|
|
done
|
|
debug "Cloned: ${_list}"
|
|
}
|
|
|
|
# clone_down
|
|
# Destroy cloned interfaces. Destroyed interfaces are echoed to
|
|
# standard output.
|
|
#
|
|
clone_down()
|
|
{
|
|
local _prefix _list ifn
|
|
_prefix=
|
|
_list=
|
|
|
|
for ifn in ${cloned_interfaces}; do
|
|
ifconfig ${ifn} destroy
|
|
if [ $? -eq 0 ]; then
|
|
_list="${_list}${_prefix}${ifn}"
|
|
[ -z "$_prefix" ] && _prefix=' '
|
|
fi
|
|
done
|
|
debug "Destroyed clones: ${_list}"
|
|
}
|
|
|
|
# childif_create
|
|
# Create and configure child interfaces. Return 0 if child
|
|
# interfaces are created.
|
|
#
|
|
childif_create()
|
|
{
|
|
local cfg child child_wlans create_args debug_flags ifn i
|
|
cfg=1
|
|
ifn=$1
|
|
|
|
# Create wireless interfaces
|
|
child_wlans=`get_if_var $ifn wlans_IF`
|
|
|
|
for child in ${child_wlans}; do
|
|
create_args="wlandev $ifn `get_if_var $child create_args_IF`"
|
|
debug_flags="`get_if_var $child wlandebug_IF`"
|
|
|
|
if expr $child : 'wlan[0-9][0-9]*$' >/dev/null 2>&1; then
|
|
ifconfig $child create ${create_args} && cfg=0
|
|
if [ -n "${debug_flags}" ]; then
|
|
wlandebug -i $child ${debug_flags}
|
|
fi
|
|
else
|
|
i=`ifconfig wlan create ${create_args}`
|
|
if [ -n "${debug_flags}" ]; then
|
|
wlandebug -i $i ${debug_flags}
|
|
fi
|
|
ifconfig $i name $child && cfg=0
|
|
fi
|
|
if autoif $child; then
|
|
ifn_start $child
|
|
fi
|
|
done
|
|
|
|
return ${cfg}
|
|
}
|
|
|
|
# childif_destroy
|
|
# Destroy child interfaces.
|
|
#
|
|
childif_destroy()
|
|
{
|
|
local cfg child child_wlans ifn
|
|
cfg=1
|
|
|
|
child_wlans="`get_if_var $ifn wlans_IF` `get_if_var $ifn vaps_IF`"
|
|
for child in ${child_wlans}; do
|
|
ifconfig $child destroy && cfg=0
|
|
done
|
|
|
|
return ${cfg}
|
|
}
|
|
|
|
# ng_mkpeer
|
|
# Create netgraph nodes.
|
|
#
|
|
ng_mkpeer()
|
|
{
|
|
ngctl -f - 2> /dev/null <<EOF
|
|
mkpeer $*
|
|
msg dummy nodeinfo
|
|
EOF
|
|
}
|
|
|
|
# ng_create_one
|
|
# Create netgraph nodes.
|
|
#
|
|
ng_create_one()
|
|
{
|
|
local t
|
|
|
|
ng_mkpeer $* | while read line; do
|
|
t=`expr "${line}" : '.* name="\([a-z]*[0-9]*\)" .*'`
|
|
if [ -n "${t}" ]; then
|
|
echo ${t}
|
|
return
|
|
fi
|
|
done
|
|
}
|
|
|
|
# gif_up
|
|
# Create gif(4) tunnel interfaces.
|
|
gif_up()
|
|
{
|
|
local i peers
|
|
|
|
for i in ${gif_interfaces}; do
|
|
peers=`get_if_var $i gifconfig_IF`
|
|
case ${peers} in
|
|
'')
|
|
continue
|
|
;;
|
|
*)
|
|
if expr $i : 'gif[0-9][0-9]*$' >/dev/null 2>&1; then
|
|
ifconfig $i create >/dev/null 2>&1
|
|
else
|
|
gif=`ifconfig gif create`
|
|
ifconfig $gif name $i
|
|
fi
|
|
ifconfig $i tunnel ${peers}
|
|
ifconfig $i up
|
|
;;
|
|
esac
|
|
done
|
|
}
|
|
|
|
# ng_fec_create ifn
|
|
# Configure Fast EtherChannel for interface $ifn. Returns 0 if
|
|
# FEC arguments were found and configured; returns !0 otherwise.
|
|
ng_fec_create()
|
|
{
|
|
local req_iface iface bogus
|
|
req_iface="$1"
|
|
|
|
ngctl shutdown ${req_iface}: > /dev/null 2>&1
|
|
|
|
bogus=""
|
|
while true; do
|
|
iface=`ng_create_one fec dummy fec`
|
|
if [ -z "${iface}" ]; then
|
|
exit 2
|
|
fi
|
|
if [ "${iface}" = "${req_iface}" ]; then
|
|
break
|
|
fi
|
|
bogus="${bogus} ${iface}"
|
|
done
|
|
|
|
for iface in ${bogus}; do
|
|
ngctl shutdown ${iface}:
|
|
done
|
|
}
|
|
|
|
# fec_up
|
|
# Create Fast EtherChannel interfaces.
|
|
fec_up()
|
|
{
|
|
local i j
|
|
|
|
for i in ${fec_interfaces}; do
|
|
ng_fec_create $i
|
|
for j in `get_if_var $i fecconfig_IF`; do
|
|
case ${j} in
|
|
'')
|
|
continue
|
|
;;
|
|
*)
|
|
ngctl msg ${i}: add_iface "\"${j}\""
|
|
;;
|
|
esac
|
|
done
|
|
done
|
|
}
|
|
|
|
# ipx_up ifn
|
|
# Configure any IPX addresses for interface $ifn. Returns 0 if
|
|
# IPX arguments were found and configured; returns 1 otherwise.
|
|
#
|
|
ipx_up()
|
|
{
|
|
local ifn
|
|
ifn="$1"
|
|
|
|
# ifconfig_IF_ipx
|
|
ifconfig_args=`_ifconfig_getargs $ifn ipx`
|
|
if [ -n "${ifconfig_args}" ]; then
|
|
ifconfig ${ifn} ${ifconfig_args}
|
|
return 0
|
|
fi
|
|
|
|
return 1
|
|
}
|
|
|
|
# ipx_down ifn
|
|
# Remove IPX addresses for interface $ifn. Returns 0 if IPX
|
|
# addresses were found and unconfigured. It returns 1, otherwise.
|
|
#
|
|
ipx_down()
|
|
{
|
|
local _if _ifs _ret ipxList oldifs _ipx
|
|
_if=$1
|
|
_ifs="^"
|
|
_ret=1
|
|
ipxList="`ifconfig ${_if} | grep 'ipx ' | tr "\n" "$_ifs"`"
|
|
oldifs="$IFS"
|
|
|
|
IFS="$_ifs"
|
|
for _ipx in $ipxList ; do
|
|
# get rid of extraneous line
|
|
[ -z "$_ipx" ] && break
|
|
|
|
_ipx=`expr "$_ipx" : '.*\(ipx [0-9a-h]\{1,8\}H*\.[0-9a-h]\{1,12\}\).*'`
|
|
|
|
IFS="$oldifs"
|
|
ifconfig ${_if} ${_ipx} delete
|
|
IFS="$_ifs"
|
|
_ret=0
|
|
done
|
|
IFS="$oldifs"
|
|
|
|
return $_ret
|
|
}
|
|
|
|
# ifnet_rename
|
|
# Rename all requested interfaces.
|
|
#
|
|
ifnet_rename()
|
|
{
|
|
local _if _ifname
|
|
|
|
# ifconfig_IF_name
|
|
for _if in `ifconfig -l`; do
|
|
_ifname=`get_if_var $_if ifconfig_IF_name`
|
|
if [ ! -z "$_ifname" ]; then
|
|
ifconfig $_if name $_ifname
|
|
fi
|
|
done
|
|
|
|
return 0
|
|
}
|
|
|
|
# list_net_interfaces type
|
|
# List all network interfaces. The type of interface returned
|
|
# can be controlled by the type argument. The type
|
|
# argument can be any of the following:
|
|
# nodhcp - all interfaces, excluding DHCP configured interfaces
|
|
# dhcp - list only DHCP configured interfaces
|
|
# noautoconf - all interfaces, excluding IPv6 Stateless
|
|
# Address Autoconf configured interfaces
|
|
# autoconf - list only IPv6 Stateless Address Autoconf
|
|
# configured interfaces
|
|
# If no argument is specified all network interfaces are output.
|
|
# Note that the list will include cloned interfaces if applicable.
|
|
# Cloned interfaces must already exist to have a chance to appear
|
|
# in the list if ${network_interfaces} is set to `auto'.
|
|
#
|
|
list_net_interfaces()
|
|
{
|
|
local type _tmplist _list _autolist _lo _if
|
|
type=$1
|
|
|
|
# Get a list of ALL the interfaces and make lo0 first if it's there.
|
|
#
|
|
_tmplist=
|
|
case ${network_interfaces} in
|
|
[Aa][Uu][Tt][Oo])
|
|
_autolist="`ifconfig -l`"
|
|
_lo=
|
|
for _if in ${_autolist} ; do
|
|
if autoif $_if; then
|
|
if [ "$_if" = "lo0" ]; then
|
|
_lo="lo0 "
|
|
else
|
|
_tmplist="${_tmplist} ${_if}"
|
|
fi
|
|
fi
|
|
done
|
|
_tmplist="${_lo}${_tmplist# }"
|
|
;;
|
|
*)
|
|
_tmplist="${network_interfaces} ${cloned_interfaces}"
|
|
|
|
# lo0 is effectively mandatory, so help prevent foot-shooting
|
|
#
|
|
case "$_tmplist" in
|
|
lo0|'lo0 '*|*' lo0'|*' lo0 '*) ;; # This is fine, do nothing
|
|
*) _tmplist="lo0 ${_tmplist}" ;;
|
|
esac
|
|
;;
|
|
esac
|
|
|
|
_list=
|
|
case "$type" in
|
|
nodhcp)
|
|
for _if in ${_tmplist} ; do
|
|
if ! dhcpif $_if && \
|
|
[ -n "`_ifconfig_getargs $_if`" ]; then
|
|
_list="${_list# } ${_if}"
|
|
fi
|
|
done
|
|
;;
|
|
dhcp)
|
|
for _if in ${_tmplist} ; do
|
|
if dhcpif $_if; then
|
|
_list="${_list# } ${_if}"
|
|
fi
|
|
done
|
|
;;
|
|
noautoconf)
|
|
for _if in ${_tmplist} ; do
|
|
if ! ipv6_autoconfif $_if && \
|
|
[ -n "`_ifconfig_getargs $_if ipv6`" ]; then
|
|
_list="${_list# } ${_if}"
|
|
fi
|
|
done
|
|
;;
|
|
autoconf)
|
|
for _if in ${_tmplist} ; do
|
|
if ipv6_autoconfif $_if; then
|
|
_list="${_list# } ${_if}"
|
|
fi
|
|
done
|
|
;;
|
|
*)
|
|
_list=${_tmplist}
|
|
;;
|
|
esac
|
|
|
|
echo $_list
|
|
|
|
return 0
|
|
}
|
|
|
|
# get_default_if -address_family
|
|
# Get the interface of the default route for the given address family.
|
|
# The -address_family argument must be suitable passing to route(8).
|
|
#
|
|
get_default_if()
|
|
{
|
|
local routeget oldifs defif line
|
|
defif=
|
|
oldifs="$IFS"
|
|
IFS="
|
|
"
|
|
for line in `route -n get $1 default 2>/dev/null`; do
|
|
case $line in
|
|
*interface:*)
|
|
defif=${line##*: }
|
|
;;
|
|
esac
|
|
done
|
|
IFS=${oldifs}
|
|
|
|
echo $defif
|
|
}
|
|
|
|
# hexdigit arg
|
|
# Echo decimal number $arg (single digit) in hexadecimal format.
|
|
hexdigit()
|
|
{
|
|
if [ $1 -lt 10 ]; then
|
|
echo $1
|
|
else
|
|
case $1 in
|
|
10) echo a ;;
|
|
11) echo b ;;
|
|
12) echo c ;;
|
|
13) echo d ;;
|
|
14) echo e ;;
|
|
15) echo f ;;
|
|
esac
|
|
fi
|
|
}
|
|
|
|
# hexprint arg
|
|
# Echo decimal number $arg (multiple digits) in hexadecimal format.
|
|
hexprint()
|
|
{
|
|
local val str dig
|
|
val=$1
|
|
str=''
|
|
dig=`hexdigit $((${val} & 15))`
|
|
str=${dig}${str}
|
|
val=$((${val} >> 4))
|
|
|
|
while [ ${val} -gt 0 ]; do
|
|
dig=`hexdigit $((${val} & 15))`
|
|
str=${dig}${str}
|
|
val=$((${val} >> 4))
|
|
done
|
|
|
|
echo ${str}
|
|
}
|
|
|
|
is_wired_interface()
|
|
{
|
|
local media
|
|
|
|
case `ifconfig $1 2>/dev/null` in
|
|
*media:?Ethernet*) media=Ethernet ;;
|
|
esac
|
|
|
|
test "$media" = "Ethernet"
|
|
}
|
|
|
|
# network6_getladdr if [flag]
|
|
# Echo link-local address from $if if any.
|
|
# If flag is defined, tentative ones will be excluded.
|
|
network6_getladdr()
|
|
{
|
|
local proto addr rest
|
|
ifconfig $1 2>/dev/null | while read proto addr rest; do
|
|
case ${proto} in
|
|
inet6)
|
|
case ${addr} in
|
|
fe80::*)
|
|
if [ -z "$2" ]; then
|
|
echo ${addr}
|
|
return
|
|
fi
|
|
case ${rest} in
|
|
*tentative*)
|
|
continue
|
|
;;
|
|
*)
|
|
echo ${addr}
|
|
return
|
|
esac
|
|
esac
|
|
esac
|
|
done
|
|
}
|