freebsd-skq/sys/conf/Makefile.ia64
dfr 263f9f6863 This is the first snapshot of the FreeBSD/ia64 kernel. This kernel will
not work on any real hardware (or fully work on any simulator). Much more
needs to happen before this is actually functional but its nice to see
the FreeBSD copyright message appear in the ia64 simulator.
2000-09-29 13:46:07 +00:00

341 lines
9.1 KiB
Makefile

# Makefile.ia64 -- with config changes.
# Copyright 1990 W. Jolitz
# from: src/sys/conf/Makefile.alpha,v 1.76
# $FreeBSD$
#
# Makefile for FreeBSD
#
# This makefile is constructed from a machine description:
# config machineid
# Most changes should be made in the machine description
# /sys/alpha/conf/``machineid''
# after which you should do
# config machineid
# Generic makefile changes should be made in
# /sys/alpha/conf/Makefile.alpha
# after which config should be rerun for all machines.
#
# The Linux cross tools don't understand -fformat-extensions
CWARNFLAGS= -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes \
-Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual \
-ansi
CC= ia64-unknown-linux-gcc -D__FreeBSD__ -U__linux__
LD= ia64-unknown-linux-ld
SIZE= ia64-unknown-linux-size
OBJCOPY= ia64-unknown-linux-objcopy
MACHINE_ARCH= ia64
# Which version of config(8) is required.
%VERSREQ= 500003
# Can be overridden by makeoptions or /etc/make.conf
KERNEL_KO?= kernel
KERNEL?= kernel
KODIR?= /boot/${KERNEL}
STD8X16FONT?= iso
.if !defined(S)
.if exists(./@/.)
S= ./@
.else
S= ../..
.endif
.endif
M= ${MACHINE_ARCH}
SIZE?= size
OBJCOPY?= objcopy
COPTFLAGS?=-O
INCLUDES= -nostdinc -I- -I. -I$S
# This hack is to allow kernel compiles to succeed on machines w/out srcdist
.if exists($S/../include)
INCLUDES+= -I$S/../include
.else
INCLUDES+= -I/usr/include
.endif
COPTS= ${INCLUDES} ${IDENT} -D_KERNEL -include opt_global.h
CFLAGS= ${COPTFLAGS} ${CWARNFLAGS} ${DEBUG} ${COPTS}
# XXX LOCORE means "don't declare C stuff" not "for locore.s".
ASM_CFLAGS= -x assembler-with-cpp -Wa,-x -DLOCORE ${CFLAGS}
# Select the correct set of tools. Can't set OBJFORMAT here because it
# doesn't get exported into the environment, and if it were exported
# then it might break building of utilities.
#FMT= -elf
CFLAGS+= ${FMT}
DEFINED_PROF= ${PROF}
.if defined(PROF)
CFLAGS+= -malign-functions=4
.if ${PROFLEVEL} >= 2
IDENT+= -DGPROF4 -DGUPROF
PROF+= -mprofiler-epilogue
.endif
.endif
# Put configuration-specific C flags last (except for ${PROF}) so that they
# can override the others.
CFLAGS+= ${CONF_CFLAGS}
NORMAL_C= ${CC} -c ${CFLAGS} ${PROF} ${.IMPSRC}
NORMAL_C_C= ${CC} -c ${CFLAGS} ${PROF} ${.IMPSRC}
NORMAL_S= ${CC} -c ${ASM_CFLAGS} ${.IMPSRC}
PROFILE_C= ${CC} -c ${CFLAGS} ${.IMPSRC}
NORMAL_M= perl5 $S/kern/makeobjops.pl -c $<; \
${CC} -c ${CFLAGS} ${PROF} ${.PREFIX}.c
GEN_CFILES= $S/$M/$M/genassym.c
# setdef0.c and setdef1.c are intentionally
# omitted from SYSTEM_CFILES. They include setdefs.h, a header which
# is generated from all of ${OBJS}. We don't want to have to compile
# everything just to do a make depend.
SYSTEM_CFILES= param.c vnode_if.c hints.c config.c
SYSTEM_SFILES= $S/$M/$M/locore.s
SYSTEM_DEP= Makefile ${SYSTEM_OBJS}
SYSTEM_OBJS= locore.o setdef0.o vnode_if.o ${OBJS} param.o hints.o config.o \
setdef1.o # hack.So ski can't cope with dynamic relocs
SYSTEM_LD= @${LD} ${FMT} -Bdynamic -T $S/conf/ldscript.$M \
-e locorestart \
-export-dynamic -dynamic-linker /red/herring \
-o ${.TARGET} -X ${SYSTEM_OBJS} vers.o
SYSTEM_LD_TAIL= @${OBJCOPY} --strip-symbol gcc2_compiled. ${.TARGET} ; \
${SIZE} ${FMT} ${.TARGET} ; chmod 755 ${.TARGET}
SYSTEM_DEP+= $S/conf/ldscript.$M
%BEFORE_DEPEND
%OBJS
%CFILES
%SFILES
%MFILES
%CLEAN
.PHONY: all modules
all: ${KERNEL_KO}
depend: kernel-depend
clean: kernel-clean
cleandepend: kernel-cleandepend
tags: kernel-tags
install install.debug: kernel-install
reinstall reinstall.debug: kernel-reinstall
.if !defined(DEBUG)
FULLKERNEL= ${KERNEL_KO}
.else
FULLKERNEL= ${KERNEL_KO}.debug
${KERNEL_KO}: ${FULLKERNEL}
${OBJCOPY} --strip-debug ${FULLKERNEL} ${KERNEL_KO}
.endif
${FULLKERNEL}: ${SYSTEM_DEP} vers.o
@rm -f ${.TARGET}
@echo linking ${.TARGET}
${SYSTEM_LD}
${SYSTEM_LD_TAIL}
.if !exists(.depend)
${SYSTEM_OBJS}: vnode_if.h ${BEFORE_DEPEND:M*.h} ${MFILES:T:S/.m$/.h/}
.endif
.for mfile in ${MFILES}
${mfile:T:S/.m$/.h/}: ${mfile}
perl5 $S/kern/makeobjops.pl -h ${mfile}
.endfor
kernel-clean:
rm -f *.o *.so *.So *.ko *.s eddep errs \
${FULLKERNEL} ${KERNEL_KO} linterrs makelinks param.c \
setdef[01].c setdefs.h tags \
vers.c vnode_if.c vnode_if.h \
${MFILES:T:S/.m$/.c/} ${MFILES:T:S/.m$/.h/} \
${CLEAN}
#lint: /tmp param.c
# @lint -hbxn -DGENERIC -Dvolatile= ${COPTS} \
# $S/$M/$M/Locore.c ${CFILES} param.c | \
# grep -v 'struct/union .* never defined' | \
# grep -v 'possible pointer alignment problem'
locore.o: $S/$M/$M/locore.s assym.s
${NORMAL_S}
# This is a hack. BFD "optimizes" away dynamic mode if there are no
# dynamic references. We could probably do a '-Bforcedynamic' mode like
# in the a.out ld. For now, this works.
hack.So: Makefile
touch hack.c
${CC} ${FMT} -shared -nostdlib hack.c -o hack.So
rm -f hack.c
.ORDER: setdefs.h setdef0.c setdef1.c
setdef0.o: setdef0.c setdefs.h
${NORMAL_C}
setdef1.o: setdef1.c setdefs.h
${NORMAL_C}
setdef0.c setdef1.c setdefs.h: Makefile ${OBJS}
@./gensetdefs ${OBJS}
# this rule stops ./assym.s in .depend from causing problems
./assym.s: assym.s
assym.s: $S/$M/$M/genassym.sh genassym.o
sh $S/$M/$M/genassym.sh genassym.o > ${.TARGET}
genassym.o: $S/$M/$M/genassym.c
${CC} -c ${CFLAGS} $S/$M/$M/genassym.c
${SYSTEM_OBJS} genassym.o vers.o: opt_global.h
kernel-depend: assym.s param.c vnode_if.h ${BEFORE_DEPEND} \
${CFILES} ${SYSTEM_CFILES} ${GEN_CFILES} ${SFILES} \
${SYSTEM_SFILES} ${MFILES:T:S/.m$/.h/}
rm -f .newdep
CC="${CC}" mkdep -a -f .newdep ${CFLAGS} ${CFILES} ${SYSTEM_CFILES} ${GEN_CFILES}
env MKDEP_CPP="${CC} -E" \
mkdep -a -f .newdep ${ASM_CFLAGS} ${SFILES} ${SYSTEM_SFILES}
rm -f .depend
mv -f .newdep .depend
kernel-cleandepend:
rm -f .depend
links:
egrep '#if' ${CFILES} | sed -f $S/conf/defines | \
sed -e 's/:.*//' -e 's/\.c/.o/' | sort -u > dontlink
echo ${CFILES} | tr -s ' ' '\12' | sed 's/\.c/.o/' | \
sort -u | comm -23 - dontlink | \
sed 's,../.*/\(.*.o\),rm -f \1;ln -s ../GENERIC/\1 \1,' > makelinks
sh makelinks && rm -f dontlink
kernel-tags:
@[ -f .depend ] || { echo "you must make depend first"; exit 1; }
sh $S/conf/systags.sh
rm -f tags1
sed -e 's, ../, ,' tags > tags1
kernel-install kernel-install.debug:
.if exists(${DESTDIR}/boot)
@if [ ! -f ${DESTDIR}/boot/device.hints ] ; then \
echo "You must set up a ${DESTDIR}/boot/device.hints file first." ; \
exit 1 ; \
fi
@if [ x"`grep device.hints ${DESTDIR}/boot/defaults/loader.conf ${DESTDIR}/boot/loader.conf`" = "x" ]; then \
echo "You must activate /boot/device.hints in loader.conf." ; \
exit 1 ; \
fi
.endif
@if [ ! -f ${KERNEL_KO}${.TARGET:S/kernel-install//} ] ; then \
echo "You must build a kernel first." ; \
exit 1 ; \
fi
.if exists(${DESTDIR}${KODIR})
.if exists(${DESTDIR}${KODIR}.old)
@-chflags -R noschg ${DESTDIR}${KODIR}.old
-rm -rf ${DESTDIR}${KODIR}.old
.endif
mv ${DESTDIR}${KODIR} ${DESTDIR}${KODIR}.old
.endif
mkdir -p ${DESTDIR}${KODIR}
@if [ -f ${DESTDIR}${KODIR}/${KERNEL_KO} ] ; then \
chflags noschg ${DESTDIR}${KODIR}/${KERNEL_KO} ; \
fi
install -c -m 555 -o root -g wheel -fschg \
${KERNEL_KO}${.TARGET:S/kernel-install//} ${DESTDIR}${KODIR}
kernel-reinstall kernel-reinstall.debug:
@if [ -f ${DESTDIR}${KODIR}/${KERNEL_KO} ] ; then \
chflags noschg ${DESTDIR}${KODIR}/${KERNEL_KO} ; \
fi
install -c -m 555 -o root -g wheel -fschg \
${KERNEL_KO}${.TARGET:S/kernel-reinstall//} ${DESTDIR}${KODIR}
.if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists($S/modules)
all: modules
depend: modules-depend
clean: modules-clean
cleandepend: modules-cleandepend
tags: modules-tags
install install.debug: modules-install
reinstall reinstall.debug: modules-reinstall
.endif
MKMODULESENV= MAKEOBJDIRPREFIX=${.OBJDIR}/modules KMODDIR=${DESTDIR}${KODIR}
modules:
@mkdir -p ${.OBJDIR}/modules
cd $S/modules && env ${MKMODULESENV} ${MAKE} obj all
modules-depend:
@mkdir -p ${.OBJDIR}/modules
cd $S/modules && env ${MKMODULESENV} ${MAKE} obj depend
modules-clean:
cd $S/modules && env ${MKMODULESENV} ${MAKE} clean
modules-cleandepend:
cd $S/modules && env ${MKMODULESENV} ${MAKE} cleandepend
modules-cleandir:
cd $S/modules && env ${MKMODULESENV} ${MAKE} cleandir
modules-tags:
cd $S/modules && env ${MKMODULESENV} ${MAKE} tags
modules-install modules-install.debug:
cd $S/modules && env ${MKMODULESENV} ${MAKE} install
modules-reinstall modules-reinstall.debug:
cd $S/modules && env ${MKMODULESENV} ${MAKE} install
config.o:
${NORMAL_C}
param.c: $S/conf/param.c
-rm -f param.c
cp $S/conf/param.c .
param.o:
${NORMAL_C}
vers.c: $S/conf/newvers.sh $S/sys/param.h ${SYSTEM_DEP}
sh $S/conf/newvers.sh ${KERN_IDENT} ${IDENT}
# XXX strictly, everything depends on Makefile because changes to ${PROF}
# only appear there, but we don't handle that.
vers.o:
${NORMAL_C}
hints.o: hints.c
${NORMAL_C}
vnode_if.c: $S/kern/vnode_if.pl $S/kern/vnode_if.src
perl5 $S/kern/vnode_if.pl -c $S/kern/vnode_if.src
vnode_if.h: $S/kern/vnode_if.pl $S/kern/vnode_if.src
perl5 $S/kern/vnode_if.pl -h $S/kern/vnode_if.src
vnode_if.o:
${NORMAL_C}
.if exists($S/../share/mk)
.include "$S/../share/mk/bsd.kern.mk"
.else
.include <bsd.kern.mk>
.endif
%RULES
# DO NOT DELETE THIS LINE -- make depend uses it