d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
9977806373
freebsd-skq/sys/dev/ray/if_ray.c
dmlb 5a238b634c Newbusify resource allocation. 
Have OLDCARD version of the remapping.

Remove BPF conditionals.

Remove ISA/3.x stuff and add -current stuff.
2000-05-11 18:55:38 +00:00

3390 lines
92 KiB
C
Raw Blame History

/*
* Copyright (C) 2000
* Dr. Duncan McLennan Barclay, dmlb@ragnet.demon.co.uk.
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY DUNCAN BARCLAY AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL DUNCAN BARCLAY OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $Id: if_ray.c,v 1.24 2000/04/24 15:49:20 dmlb Exp $
*
*/
/* $NetBSD: if_ray.c,v 1.12 2000/02/07 09:36:27 augustss Exp $ */
/*
* Copyright (c) 2000 Christian E. Hopps
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
*
* Card configuration
* ==================
*
* This card is unusual in that it uses both common and attribute
* memory whilst working. The -stable versions of FreeBSD have a real
* problem managing and setting up the correct memory maps. This
* driver should reset the memory maps correctly under PAO and non-PAO
* -stable systems. Work is in hand to fix these problems for -current.
*
* The first fixes the brain deadness of pccardd (where it reads the
* CIS for common memory, sets it all up and then throws it all away
* assuming the card is an ed driver...). Note that this could be
* dangerous (because it doesn't interact with pccardd) if you
* use other memory mapped cards at the same time.
*
* The second option ensures that common memory is remapped whenever
* we are going to access it (we can't just do it once, as something
* like pccardd may have read the attribute memory and pccard.c
* doesn't re-map the last active window - it remaps the last
* non-active window...).
*
*
* Ad-hoc and infra-structure modes
* ================================
*
* At present only the ad-hoc mode is being worked on.
*
* Apart from just writing the code for infrastructure mode I have a
* few concerns about both the Linux and NetBSD drivers in this area.
* They don't seem to differentiate between the MAC address of the AP
* and the BSS_ID of the network. I presume this is handled when
* joining a managed n/w and the network parameters are updated, but
* I'm not sure. How does this interact with ARP? For mobility we want
* to be able to move around without worrying about which AP we are
* actually talking to - we should always talk to the BSS_ID.
*
* The Linux driver also seems to have the capability to act as an AP.
* I wonder what facilities the "AP" can provide within a driver? We can
* probably use the BRIDGE code to form an ESS but I don't think
* power saving etc. is easy.
*
*
* Packet translation/encapsulation
* ================================
*
* Currently we only support the Webgear encapsulation
* 802.11 header <net/if_ieee80211.h>struct ieee80211_header
* 802.3 header <net/ethernet.h>struct ether_header
* 802.2 LLC header
* 802.2 SNAP header
*
* We should support whatever packet types the following drivers have
* if_wi.c FreeBSD, RFC1042
* if_ray.c NetBSD Webgear, RFC1042
* rayctl.c Linux Webgear, RFC1042
* also whatever we can divine from the NDC Access points and Kanda's boxes.
*
* Most drivers appear to have a RFC1042 translation. The incoming packet is
* 802.11 header <net/if_ieee80211.h>struct ieee80211_header
* 802.2 LLC header
* 802.2 SNAP header
*
* This is translated to
* 802.3 header <net/ethernet.h>struct ether_header
* 802.2 LLC header
* 802.2 SNAP header
*
* Linux seems to look at the SNAP org_code and do some translations
* for IPX and APPLEARP on that. This just may be how Linux does IPX
* and NETATALK. Need to see how FreeBSD does these.
*
* Translation should be selected via if_media stuff or link types.
*/
/*
* TODO
*
* _stop - mostly done
* would be nice to understand shutdown/or power save to prevent RX
* _reset - done
* just needs calling in the right places
* converted panics to resets - when tx packets are the wrong length
* may be needed in a couple of other places when I do more commands
* havenet - mostly done
* i think i've got all the places to set it right, but not so sure
* we reset it in all the right places
* _unload - done
* recreated most of stop but as card is unplugged don't try and
* access it to turn it off
* TX bpf - done
* RX bpf - done
* I would much prefer to have the complete 802.11 packet dropped to
* the bpf tap and then have a user land program parse the headers
* as needed. This way, tcpdump -w can be used to grab the raw data. If
* needed the 802.11 aware program can "translate" the .11 to ethernet
* for tcpdump -r
* use std timeout code for download - done
* was mainly moving a call and removing a load of stuff in
* download_done as it duplicates check_ccs and ccs_done
* promisoius - done
* add the start_join_net - done
* i needed it anyway
* remove startccs and startcmd - done
* as those were used for the NetBSD start timeout
* multicast - done but UNTESTED
* I don't have the ability/facilty to test this
* rxlevel - done
* stats reported via raycontrol
* getparams ioctl - done
* reported via raycontrol
* start_join_done needs a restart in download_done - done
* now use netbsd style start up
* ioctls - done
* use raycontrol
* translation, BSS_ID, countrycode, changing mode
* ifp->if_hdr length - done
* rx level and antenna cache - done
* antenna not used yet
* antenna tx side - done
* not tested!
* shutdown - done
* the driver seems to do the right thing for plugging and unplugging
* cards
* apm/resume - ignore
* apm+pccard is borken for 3.x - no one knows how to do it anymore
* fix the XXX code in start_join_done - n/a
* i've removed this as the error handling should be consistent for
* all ECF commands and none of the other commands bother!
* ray_update_params_done needs work - done
* as part of scheduler/promisc re-write
* raycontrol to be firmware version aware - done
* also report and update parameters IOCTLs are version aware
* make RAY_DPRINTFN RAY_DPRINTF - done
* make all printfs RAY_PRINTF - done
* faster TX routine - done
* see comments but OACTIVE is gone
* __P to die - done
* the rest is ansi anyway
* macroize the attribute read/write and 3.x driver - done
* like the SRAM macros?
*
* ***stop/unload needs to drain comq
* ***stop/unload checks in more routines
* ***reset in ray_init_user?
* ***IFF_RUNNING checks are they really needed?
* ***PCATCH tsleeps and have something that will clean the runq
* ***watchdog to catch screwed up removals?
* ***check and rationalise CM mappings
* ***should the desired nw parameters move into the comq entry to maintain
* correct sequencing?
* why can't download use sc_promisc?
* macro for gone and check is at head of all externally called routines
* for ALLMULTI must go into PROMISC and filter unicast packets
* mcast code resurrection
* softc and ifp in variable definition block
* UPDATE_PARAMS seems to return an interrupt - maybe the timeout
* is needed for wrong values?
* remember it must be serialised as it uses the HCF-ECF area
* check all RECERRs and make sure that some are RAY_PRINTF not RAY_DPRINTF
* havenet needs checking again
* error handling of ECF command completions
* probably function/macro to test unload at top of commands
* proper setting of mib_hop_seq_len with country code for v4 firmware
* _reset - check where needed
* splimp or splnet?
* more translations
* tidy #includes - we cant need all of these
* infrastructure mode
* needs handling of basic rate set
* all ray_sj, ray_assoc sequencues need a "nicer" solution as we
* need to consider WEP
* acting as ap - should be able to get working from the manual
* differeniate between parameters set in attach and init
* spinning in ray_cmd_issue
* make RAY_DEBUG a knob somehow - either sysctl or IFF_DEBUG
* callout handles need rationalising. can probably remove sj_timerh
* fragmentation when rx level drops?
* proper handling of the basic rate set - see the manual
*
* ray_nw_param- promisc in here too?
* ray_nw_param- sc_station_addr in here too (for changing mac address)
* ray_nw_param- move desired into the command structure?
*/
#define XXX 0
#define XXX_CLEARCCS_IN_INIT 0
#define XXX_ASSOC 0
#define XXX_MCAST 0
#define XXX_RESET 0
#define XXX_IFQ_PEEK 0
#define RAY_DEBUG ( \
/* RAY_DBG_RECERR | */ \
/* RAY_DBG_SUBR | */ \
RAY_DBG_BOOTPARAM | \
/* RAY_DBG_STARTJOIN | */ \
/* RAY_DBG_CCS | */ \
/* RAY_DBG_IOCTL | */ \
/* RAY_DBG_MBUF | */ \
/* RAY_DBG_RX | */ \
/* RAY_DBG_CM | */ \
/* RAY_DBG_COM | */ \
/* RAY_DBG_STOP | */ \
0 \
)
/*
* XXX build options - move to LINT
*/
#define RAY_NEED_CM_REMAPPING 1 /* Needed until pccard maps more than one memory area */
#define RAY_COM_TIMEOUT (hz/2) /* Timeout for CCS commands */
#define RAY_RESET_TIMEOUT (5*hz) /* Timeout for resetting the card */
#define RAY_TX_TIMEOUT (hz/2) /* Timeout for rescheduling TX */
#define RAY_USE_CALLOUT_STOP 0 /* Set for kernels with callout_stop function - 3.3 and above */
/*
* XXX build options - move to LINT
*/
#ifndef RAY_DEBUG
#define RAY_DEBUG 0x0000
#endif /* RAY_DEBUG */
#include "ray.h"
#if NRAY > 0
#include <sys/param.h>
#include <sys/types.h>
#include <sys/cdefs.h>
#include <sys/conf.h>
#include <sys/errno.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/mbuf.h>
#include <sys/callout.h>
#include <sys/select.h>
#include <sys/socket.h>
#include <sys/sockio.h>
#include <sys/systm.h>
#include <sys/sysctl.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <net/if.h>
#include <net/if_arp.h>
#include <net/ethernet.h>
#include <net/if_dl.h>
#include <net/if_media.h>
#include <net/if_mib.h>
#include <net/bpf.h>
#include <machine/bus.h>
#include <sys/rman.h>
#include <machine/resource.h>
#include <machine/clock.h>
#include <machine/md_var.h>
#include <machine/bus_pio.h>
#include <machine/bus.h>
#include <machine/limits.h>
#include <dev/pccard/pccardvar.h>
#include "card_if.h"
#include <dev/ray/if_ieee80211.h>
#include <dev/ray/if_rayreg.h>
#include <dev/ray/if_raymib.h>
#include <dev/ray/if_raydbg.h>
#include <dev/ray/if_rayvar.h>
/*
* Prototyping
*/
static int ray_attach (device_t);
static int ray_ccs_alloc (struct ray_softc *sc, size_t *ccsp, u_int cmd, int timo);
static u_int8_t ray_ccs_free (struct ray_softc *sc, size_t ccs);
static void ray_com_ecf (struct ray_softc *sc, struct ray_comq_entry *com);
static void ray_com_ecf_done (struct ray_softc *sc);
static void ray_com_ecf_timo (void *xsc);
#if RAY_DEBUG & RAY_DBG_COM
static struct ray_comq_entry *
ray_com_malloc (ray_comqfn_t function, int flags, char *mesg);
#else
static struct ray_comq_entry *
ray_com_malloc (ray_comqfn_t function, int flags);
#endif /* RAY_DEBUG & RAY_DBG_COM */
static void ray_com_runq (struct ray_softc *sc);
static void ray_com_runq_add (struct ray_softc *sc, struct ray_comq_entry *com);
static void ray_com_runq_arr (struct ray_softc *sc, struct ray_comq_entry *com[], int ncom, char *wmesg);
static void ray_com_runq_done (struct ray_softc *sc);
static int ray_detach (device_t);
static void ray_init_user (void *xsc);
static void ray_init_assoc (struct ray_softc *sc, struct ray_comq_entry *com);
static void ray_init_assoc_done (struct ray_softc *sc, size_t ccs);
static void ray_init_download (struct ray_softc *sc, struct ray_comq_entry *com);
static void ray_init_download_done (struct ray_softc *sc, size_t ccs);
static void ray_init_sj (struct ray_softc *sc, struct ray_comq_entry *com);
static void ray_init_sj_done (struct ray_softc *sc, size_t ccs);
static void ray_intr (void *xsc);
static void ray_intr_ccs (struct ray_softc *sc, u_int8_t cmd, size_t ccs);
static void ray_intr_rcs (struct ray_softc *sc, u_int8_t cmd, size_t ccs);
static void ray_intr_updt_errcntrs (struct ray_softc *sc);
static int ray_ioctl (struct ifnet *ifp, u_long command, caddr_t data);
static void ray_mcast (struct ray_softc *sc, struct ray_comq_entry *com);
static void ray_mcast_done (struct ray_softc *sc, size_t ccs);
static int ray_mcast_user (struct ray_softc *sc);
static int ray_probe (device_t);
static void ray_promisc (struct ray_softc *sc, struct ray_comq_entry *com);
static int ray_promisc_user (struct ray_softc *sc);
static void ray_repparams (struct ray_softc *sc, struct ray_comq_entry *com);
static void ray_repparams_done (struct ray_softc *sc, size_t ccs);
static int ray_repparams_user (struct ray_softc *sc, struct ray_param_req *pr);
static int ray_repstats_user (struct ray_softc *sc, struct ray_stats_req *sr);
static void ray_reset (struct ray_softc *sc);
static void ray_reset_timo (void *xsc);
static int ray_res_alloc_am (struct ray_softc *sc);
static int ray_res_alloc_cm (struct ray_softc *sc);
static int ray_res_alloc_irq (struct ray_softc *sc);
static void ray_res_release (struct ray_softc *sc);
static void ray_rx (struct ray_softc *sc, size_t rcs);
static void ray_rx_update_cache (struct ray_softc *sc, u_int8_t *src, u_int8_t siglev, u_int8_t antenna);
static void ray_stop (struct ray_softc *sc);
static void ray_tx (struct ifnet *ifp);
static void ray_tx_done (struct ray_softc *sc, size_t ccs);
static void ray_tx_timo (void *xsc);
static size_t ray_tx_wrhdr (struct ray_softc *sc, struct ether_header *eh, size_t bufp);
static void ray_upparams (struct ray_softc *sc, struct ray_comq_entry *com);
static void ray_upparams_done (struct ray_softc *sc, size_t ccs);
static int ray_upparams_user (struct ray_softc *sc, struct ray_param_req *pr);
static void ray_watchdog (struct ifnet *ifp);
static u_int8_t ray_tx_best_antenna (struct ray_softc *sc, u_int8_t *dst);
#if RAY_DEBUG & RAY_DBG_COM
static void ray_com_ecf_check (struct ray_softc *sc, size_t ccs, char *mesg);
#endif /* RAY_DEBUG & RAY_DBG_COM */
#if RAY_DEBUG & RAY_DBG_MBUF
static void ray_dump_mbuf (struct ray_softc *sc, struct mbuf *m, char *s);
#endif /* RAY_DEBUG & RAY_DBG_MBUF */
#if RAY_NEED_CM_REMAPPING
static void ray_attr_mapam (struct ray_softc *sc);
static void ray_attr_mapcm (struct ray_softc *sc);
static u_int8_t ray_attr_read_1 (struct ray_softc *sc, off_t offset);
static void ray_attr_write_1 (struct ray_softc *sc, off_t offset, u_int8_t byte);
#endif /* RAY_NEED_CM_REMAPPING */
/*
* PC-Card (PCMCIA) driver definition
*/
static device_method_t ray_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, ray_probe),
DEVMETHOD(device_attach, ray_attach),
DEVMETHOD(device_detach, ray_detach),
{ 0, 0 }
};
static driver_t ray_driver = {
"ray",
ray_methods,
sizeof(struct ray_softc)
};
static devclass_t ray_devclass;
DRIVER_MODULE(ray, pccard, ray_driver, ray_devclass, 0, 0);
/*
* Probe for the card by checking its startup results.
*
* Fixup any bugs/quirks for different firmware.
*/
static int
ray_probe(device_t dev)
{
struct ray_softc *sc = device_get_softc(dev);
struct ray_ecf_startup_v5 *ep = &sc->sc_ecf_startup;
int error;
sc->dev = dev;
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
#if (RAY_DBG_CM || RAY_DBG_BOOTPARAM)
{
u_long flags = 0xffff;
CARD_GET_RES_FLAGS(device_get_parent(dev), dev, SYS_RES_IOPORT,
0, &flags);
RAY_PRINTF(sc,
"ioport start 0x%0lx count 0x%0lx flags 0x%0lx",
bus_get_resource_start(dev, SYS_RES_IOPORT, 0),
bus_get_resource_count(dev, SYS_RES_IOPORT, 0),
flags);
CARD_GET_RES_FLAGS(device_get_parent(dev), dev, SYS_RES_MEMORY,
0, &flags);
RAY_PRINTF(sc,
"memory start 0x%0lx count 0x%0lx flags 0x%0lx",
bus_get_resource_start(dev, SYS_RES_MEMORY, 0),
bus_get_resource_count(dev, SYS_RES_MEMORY, 0),
flags);
RAY_PRINTF(sc, "irq start 0x%0lx count 0x%0lx",
bus_get_resource_start(dev, SYS_RES_IRQ, 0),
bus_get_resource_count(dev, SYS_RES_IRQ, 0));
}
#endif /* (RAY_DBG_CM || RAY_DBG_BOOTPARAM) */
error = ray_res_alloc_cm(sc);
if (error)
return (error);
error = ray_res_alloc_am(sc);
if (error) {
ray_res_release(sc);
return (error);
}
error = ray_res_alloc_irq(sc);
if (error) {
ray_res_release(sc);
return (error);
}
/*
* Read startup results, check the card is okay and work out what
* version we are using.
*/
RAY_MAP_CM(sc);
SRAM_READ_REGION(sc, RAY_ECF_TO_HOST_BASE, ep,
sizeof(sc->sc_ecf_startup));
if (ep->e_status != RAY_ECFS_CARD_OK) {
RAY_PRINTF(sc, "card failed self test 0x%b",
ep->e_status, RAY_ECFS_PRINTFB);
ray_res_release(sc);
return (ENXIO);
}
if (sc->sc_version != RAY_ECFS_BUILD_4 &&
sc->sc_version != RAY_ECFS_BUILD_5) {
RAY_PRINTF(sc, "unsupported firmware version 0x%0x",
ep->e_fw_build_string);
ray_res_release(sc);
return (ENXIO);
}
RAY_DPRINTF(sc, RAY_DBG_BOOTPARAM, "found a card");
sc->gone = 0;
/*
* Reset any pending interrupts
*/
RAY_HCS_CLEAR_INTR(sc);
/*
* Fixup tib size to be correct - on build 4 it is garbage
*/
if (sc->sc_version == RAY_ECFS_BUILD_4 && sc->sc_tibsize == 0x55)
sc->sc_tibsize = sizeof(struct ray_tx_tib);
return (0);
}
/*
* Attach the card into the kernel
*/
static int
ray_attach(device_t dev)
{
struct ray_softc *sc = device_get_softc(dev);
struct ray_ecf_startup_v5 *ep = &sc->sc_ecf_startup;
struct ifnet *ifp = &sc->arpcom.ac_if;
size_t ccs;
int i;
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
RAY_MAP_CM(sc);
if (sc->gone) {
RAY_PRINTF(sc, "unloaded");
return (ENODEV);
}
/*
* Set the parameters that will survive stop/init and
* reset a few things on the card.
*
* Do not update these in ray_init's parameter setup
*/
#if XXX
see the ray_init section for stuff to move
#endif
bzero(&sc->sc_d, sizeof(struct ray_nw_param));
bzero(&sc->sc_c, sizeof(struct ray_nw_param));
#if XXX_CLEARCCS_IN_INIT > 0
#else
/* Set all ccs to be free */
bzero(sc->sc_ccsinuse, sizeof(sc->sc_ccsinuse));
ccs = RAY_CCS_ADDRESS(0);
for (i = 0; i < RAY_CCS_LAST; ccs += RAY_CCS_SIZE, i++)
RAY_CCS_FREE(sc, ccs);
#endif /* XXX_CLEARCCS_IN_INIT */
/*
* Initialise the network interface structure
*/
if (!ifp->if_name) {
bcopy((char *)&ep->e_station_addr,
(char *)&sc->arpcom.ac_enaddr, ETHER_ADDR_LEN);
ifp->if_softc = sc;
ifp->if_name = "ray";
ifp->if_unit = device_get_unit(dev);
ifp->if_timer = 0;
#if XXX_MCAST
ifp->if_flags = (IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST);
#else
ifp->if_flags = (IFF_BROADCAST | IFF_SIMPLEX);
#endif /* XXX_MCAST */
ifp->if_hdrlen = sizeof(struct ieee80211_header) +
sizeof(struct ether_header);
ifp->if_baudrate = 1000000; /* Is this baud or bps ;-) */
ifp->if_output = ether_output;
ifp->if_start = ray_tx;
ifp->if_ioctl = ray_ioctl;
ifp->if_watchdog = ray_watchdog;
ifp->if_init = ray_init_user;
ifp->if_snd.ifq_maxlen = IFQ_MAXLEN;
if_attach(ifp);
ether_ifattach(ifp);
}
/*
* Initialise the timers and bpf
*/
callout_handle_init(&sc->com_timerh);
callout_handle_init(&sc->reset_timerh);
callout_handle_init(&sc->tx_timerh);
TAILQ_INIT(&sc->sc_comq);
bpfattach(ifp, DLT_EN10MB, sizeof(struct ether_header));
#if XXX
at_shutdown(ray_shutdown, sc, SHUTDOWN_POST_SYNC);
#endif /* XXX */
/*
* Print out some useful information
*/
if (bootverbose || (RAY_DEBUG & RAY_DBG_BOOTPARAM)) {
RAY_PRINTF(sc, "start up results");
if (sc->sc_version == RAY_ECFS_BUILD_4)
printf(" Firmware version 4\n");
else
printf(" Firmware version 5\n");
printf(" Status 0x%b\n", ep->e_status, RAY_ECFS_PRINTFB);
printf(" Ether address %6D\n", ep->e_station_addr, ":");
if (sc->sc_version == RAY_ECFS_BUILD_4) {
printf(" Program checksum %0x\n", ep->e_resv0);
printf(" CIS checksum %0x\n", ep->e_rates[0]);
} else {
printf(" (reserved word) %0x\n", ep->e_resv0);
printf(" Supported rates %8D\n", ep->e_rates, ":");
}
printf(" Japan call sign %12D\n", ep->e_japan_callsign, ":");
if (sc->sc_version == RAY_ECFS_BUILD_5) {
printf(" Program checksum %0x\n", ep->e_prg_cksum);
printf(" CIS checksum %0x\n", ep->e_cis_cksum);
printf(" Firmware version %0x\n",
ep->e_fw_build_string);
printf(" Firmware revision %0x\n", ep->e_fw_build);
printf(" (reserved word) %0x\n", ep->e_fw_resv);
printf(" ASIC version %0x\n", ep->e_asic_version);
printf(" TIB size %0x\n", ep->e_tibsize);
}
}
return (0);
}
/*
* Detach the card
*
* This is usually called when the card is ejected, but
* can be caused by a modunload of a controller driver.
* The idea is to reset the driver's view of the device
* and ensure that any driver entry points such as
* read and write do not hang.
*/
static int
ray_detach(device_t dev)
{
struct ray_softc *sc = device_get_softc(dev);
struct ifnet *ifp = &sc->arpcom.ac_if;
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
if (sc->gone) {
RAY_PRINTF(sc, "unloaded");
return (0);
}
/*
* Clear out timers and sort out driver state
*
* We use callout_stop to unconditionally kill the ccs and general
* timers as they are used with multiple arguments.
*/
#if RAY_USE_CALLOUT_STOP
callout_stop(sc->com_timerh);
callout_stop(sc->reset_timerh);
#else
untimeout(ray_com_ecf_timo, sc, sc->com_timerh);
untimeout(ray_reset_timo, sc, sc->reset_timerh);
#endif /* RAY_USE_CALLOUT_STOP */
untimeout(ray_tx_timo, sc, sc->tx_timerh);
sc->sc_havenet = 0;
/*
* Mark as not running
*/
ifp->if_flags &= ~IFF_RUNNING;
ifp->if_flags &= ~IFF_OACTIVE;
/*
* Cleardown interface
*/
if_detach(ifp);
/*
* Mark card as gone and release resources
*/
sc->gone = 1;
ray_res_release(sc);
RAY_PRINTF(sc, "unloading complete");
return (0);
}
/*
* Network ioctl request.
*/
static int
ray_ioctl(register struct ifnet *ifp, u_long command, caddr_t data)
{
struct ray_softc *sc = ifp->if_softc;
struct ray_param_req pr;
struct ray_stats_req sr;
struct ifreq *ifr = (struct ifreq *)data;
int s, error, error2;
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_IOCTL, "");
RAY_MAP_CM(sc);
if (sc->gone) {
RAY_PRINTF(sc, "unloaded");
ifp->if_flags &= ~IFF_RUNNING;
return (ENXIO);
}
error = 0;
error2 = 0;
s = splimp();
switch (command) {
case SIOCSIFADDR:
case SIOCGIFADDR:
case SIOCSIFMTU:
RAY_DPRINTF(sc, RAY_DBG_IOCTL, "SIFADDR/GIFADDR/SIFMTU");
error = ether_ioctl(ifp, command, data);
break;
case SIOCSIFFLAGS:
RAY_DPRINTF(sc, RAY_DBG_IOCTL, "SIFFLAGS");
/*
* If the interface is marked up and stopped, then start
* it. If it is marked down and running, then stop it.
*/
if (ifp->if_flags & IFF_UP) {
if (!(ifp->if_flags & IFF_RUNNING))
ray_init_user(sc);
else
if (sc->sc_promisc !=
!!(ifp->if_flags & (IFF_PROMISC|IFF_ALLMULTI)))
ray_promisc_user(sc);
} else {
if (ifp->if_flags & IFF_RUNNING)
ray_stop(sc);
}
break;
case SIOCADDMULTI:
case SIOCDELMULTI:
RAY_DPRINTF(sc, RAY_DBG_IOCTL, "ADDMULTI/DELMULTI");
error = ray_mcast_user(sc);
break;
case SIOCSRAYPARAM:
RAY_DPRINTF(sc, RAY_DBG_IOCTL, "SRAYPARAM");
if ((error = copyin(ifr->ifr_data, &pr, sizeof(pr))))
break;
error = ray_upparams_user(sc, &pr);
error2 = copyout(&pr, ifr->ifr_data, sizeof(pr));
error = error2 ? error2 : error;
break;
case SIOCGRAYPARAM:
RAY_DPRINTF(sc, RAY_DBG_IOCTL, "GRAYPARAM");
if ((error = copyin(ifr->ifr_data, &pr, sizeof(pr))))
break;
error = ray_repparams_user(sc, &pr);
error2 = copyout(&pr, ifr->ifr_data, sizeof(pr));
error = error2 ? error2 : error;
break;
case SIOCGRAYSTATS:
RAY_DPRINTF(sc, RAY_DBG_IOCTL, "GRAYSTATS");
error = ray_repstats_user(sc, &sr);
error2 = copyout(&sr, ifr->ifr_data, sizeof(sr));
error = error2 ? error2 : error;
break;
case SIOCGRAYSIGLEV:
RAY_DPRINTF(sc, RAY_DBG_IOCTL, "GRAYSIGLEV");
error = copyout(sc->sc_siglevs, ifr->ifr_data,
sizeof(sc->sc_siglevs));
break;
case SIOCGIFFLAGS:
RAY_DPRINTF(sc, RAY_DBG_IOCTL, "GIFFLAGS");
error = EINVAL;
break;
case SIOCGIFMETRIC:
RAY_DPRINTF(sc, RAY_DBG_IOCTL, "GIFMETRIC");
error = EINVAL;
break;
case SIOCGIFMTU:
RAY_DPRINTF(sc, RAY_DBG_IOCTL, "GIFMTU");
error = EINVAL;
break;
case SIOCGIFPHYS:
RAY_DPRINTF(sc, RAY_DBG_IOCTL, "GIFPYHS");
error = EINVAL;
break;
case SIOCSIFMEDIA:
RAY_DPRINTF(sc, RAY_DBG_IOCTL, "SIFMEDIA");
error = EINVAL;
break;
case SIOCGIFMEDIA:
RAY_DPRINTF(sc, RAY_DBG_IOCTL, "GIFMEDIA");
error = EINVAL;
break;
default:
error = EINVAL;
}
splx(s);
return (error);
}
/*
* User land entry to network initialisation.
*
* An ioctl calls ray_init_user.
*
* ray_init_user does a bit of house keeping before calling ray_download
*
* ray_init_download fills the startup parameter structure out and
* sends it to the card.
*
* ray_init_sj tells the card to try and find an existing network or
* start a new one.
*
* ray_init_sj_done checks a few parameters and we are ready to process packets
*
* the promiscuous and multi-cast modes are then set
*/
static void
ray_init_user(void *xsc)
{
struct ray_softc *sc = (struct ray_softc *)xsc;
struct ray_comq_entry *com[5];
struct ifnet *ifp = &sc->arpcom.ac_if;
int i, ncom;
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_STARTJOIN, "");
RAY_MAP_CM(sc);
if (sc->gone) {
RAY_PRINTF(sc, "unloaded");
return;
}
if ((ifp->if_flags & IFF_RUNNING))
ray_stop(sc);
/*
* Reset instance variables
*
* The first set are network parameters that are read back when
* the card starts or joins the network.
*
* The second set are network parameters that are downloaded to
* the card.
*
* The third set are driver parameters.
*
* All of the variables in these sets can be updated by the
* card or ioctls.
*/
#if XXX
see the ray_attach section for stuff to move
#endif
sc->sc_d.np_upd_param = 0;
bzero(sc->sc_d.np_bss_id, ETHER_ADDR_LEN);
sc->sc_d.np_inited = 0;
sc->sc_d.np_def_txrate = RAY_MIB_BASIC_RATE_SET_DEFAULT;
sc->sc_d.np_encrypt = 0;
sc->sc_d.np_ap_status = RAY_MIB_AP_STATUS_DEFAULT;
sc->sc_d.np_net_type = RAY_MIB_NET_TYPE_DEFAULT;
bzero(sc->sc_d.np_ssid, IEEE80211_NWID_LEN);
strncpy(sc->sc_d.np_ssid, RAY_MIB_SSID_DEFAULT, IEEE80211_NWID_LEN);
sc->sc_d.np_priv_start = RAY_MIB_PRIVACY_MUST_START_DEFAULT;
sc->sc_d.np_priv_join = RAY_MIB_PRIVACY_CAN_JOIN_DEFAULT;
sc->sc_promisc = !!(ifp->if_flags & (IFF_PROMISC|IFF_ALLMULTI));
sc->sc_havenet = 0;
sc->translation = SC_TRANSLATE_WEBGEAR;
#if XXX_CLEARCCS_IN_INIT > 0
/* Set all ccs to be free */
bzero(sc->sc_ccsinuse, sizeof(sc->sc_ccsinuse));
ccs = RAY_CCS_ADDRESS(0);
for (i = 0; i < RAY_CCS_LAST; ccs += RAY_CCS_SIZE, i++)
RAY_CCS_FREE(sc, ccs);
/* Clear any pending interrupts */
RAY_HCS_CLEAR_INTR(sc);
#endif /* XXX_CLEARCCS_IN_INIT */
/*
* We are now up and running. We are busy until network is joined.
*/
ifp->if_flags |= IFF_RUNNING | IFF_OACTIVE;
/*
* Create the following runq entries:
*
* download - download the network to the card
* sj - find or start a BSS
* assoc - associate with a ESSID if needed
* promisc - force promiscuous mode update
* mcast - force multicast list
*/
ncom = 0;
com[ncom++] = RAY_COM_MALLOC(ray_init_download, 0);
com[ncom++] = RAY_COM_MALLOC(ray_init_sj, 0);
#if XXX_ASSOC
if (sc->sc_d.np_net_type == RAY_MIB_NET_TYPE_INFRA)
com[ncom++] = RAY_COM_MALLOC(ray_init_assoc, 0);
#endif /* XXX_ASSOC */
com[ncom++] = RAY_COM_MALLOC(ray_promisc, 0);
#if XXX_MCAST
com[ncom++] = RAY_COM_MALLOC(ray_mcast, 0);
#endif /* XXX_MCAST */
ray_com_runq_arr(sc, com, ncom, "rayinit");
/* XXX no error processing from anything yet! */
for (i = 0; i < ncom; i++)
FREE(com[i], M_RAYCOM);
}
/*
* Runq entry for downloading start up structures to card
*/
static void
ray_init_download(struct ray_softc *sc, struct ray_comq_entry *com)
{
struct ray_mib_4 ray_mib_4_default;
struct ray_mib_5 ray_mib_5_default;
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_STARTJOIN, "");
RAY_MAP_CM(sc);
#define MIB4(m) ray_mib_4_default.##m
#define MIB5(m) ray_mib_5_default.##m
#define PUT2(p, v) \
do { (p)[0] = ((v >> 8) & 0xff); (p)[1] = (v & 0xff); } while(0)
/*
* Firmware version 4 defaults - see if_raymib.h for details
*/
MIB4(mib_net_type) = sc->sc_d.np_net_type;
MIB4(mib_ap_status) = sc->sc_d.np_ap_status;
bcopy(sc->sc_d.np_ssid, MIB4(mib_ssid), IEEE80211_NWID_LEN);
MIB4(mib_scan_mode) = RAY_MIB_SCAN_MODE_DEFAULT;
MIB4(mib_apm_mode) = RAY_MIB_APM_MODE_DEFAULT;
bcopy(sc->sc_station_addr, MIB4(mib_mac_addr), ETHER_ADDR_LEN);
PUT2(MIB4(mib_frag_thresh), RAY_MIB_FRAG_THRESH_DEFAULT);
PUT2(MIB4(mib_dwell_time), RAY_MIB_DWELL_TIME_V4);
PUT2(MIB4(mib_beacon_period), RAY_MIB_BEACON_PERIOD_V4);
MIB4(mib_dtim_interval) = RAY_MIB_DTIM_INTERVAL_DEFAULT;
MIB4(mib_max_retry) = RAY_MIB_MAX_RETRY_DEFAULT;
MIB4(mib_ack_timo) = RAY_MIB_ACK_TIMO_DEFAULT;
MIB4(mib_sifs) = RAY_MIB_SIFS_DEFAULT;
MIB4(mib_difs) = RAY_MIB_DIFS_DEFAULT;
MIB4(mib_pifs) = RAY_MIB_PIFS_V4;
PUT2(MIB4(mib_rts_thresh), RAY_MIB_RTS_THRESH_DEFAULT);
PUT2(MIB4(mib_scan_dwell), RAY_MIB_SCAN_DWELL_V4);
PUT2(MIB4(mib_scan_max_dwell), RAY_MIB_SCAN_MAX_DWELL_V4);
MIB4(mib_assoc_timo) = RAY_MIB_ASSOC_TIMO_DEFAULT;
MIB4(mib_adhoc_scan_cycle) = RAY_MIB_ADHOC_SCAN_CYCLE_DEFAULT;
MIB4(mib_infra_scan_cycle) = RAY_MIB_INFRA_SCAN_CYCLE_DEFAULT;
MIB4(mib_infra_super_scan_cycle)
= RAY_MIB_INFRA_SUPER_SCAN_CYCLE_DEFAULT;
MIB4(mib_promisc) = RAY_MIB_PROMISC_DEFAULT;
PUT2(MIB4(mib_uniq_word), RAY_MIB_UNIQ_WORD_DEFAULT);
MIB4(mib_slot_time) = RAY_MIB_SLOT_TIME_V4;
MIB4(mib_roam_low_snr_thresh) = RAY_MIB_ROAM_LOW_SNR_THRESH_DEFAULT;
MIB4(mib_low_snr_count) = RAY_MIB_LOW_SNR_COUNT_DEFAULT;
MIB4(mib_infra_missed_beacon_count)
= RAY_MIB_INFRA_MISSED_BEACON_COUNT_DEFAULT;
MIB4(mib_adhoc_missed_beacon_count)
= RAY_MIB_ADHOC_MISSED_BEACON_COUNT_DEFAULT;
MIB4(mib_country_code) = RAY_MIB_COUNTRY_CODE_DEFAULT;
MIB4(mib_hop_seq) = RAY_MIB_HOP_SEQ_DEFAULT;
MIB4(mib_hop_seq_len) = RAY_MIB_HOP_SEQ_LEN_V4;
MIB4(mib_cw_max) = RAY_MIB_CW_MAX_V4;
MIB4(mib_cw_min) = RAY_MIB_CW_MIN_V4;
MIB4(mib_noise_filter_gain) = RAY_MIB_NOISE_FILTER_GAIN_DEFAULT;
MIB4(mib_noise_limit_offset) = RAY_MIB_NOISE_LIMIT_OFFSET_DEFAULT;
MIB4(mib_rssi_thresh_offset) = RAY_MIB_RSSI_THRESH_OFFSET_DEFAULT;
MIB4(mib_busy_thresh_offset) = RAY_MIB_BUSY_THRESH_OFFSET_DEFAULT;
MIB4(mib_sync_thresh) = RAY_MIB_SYNC_THRESH_DEFAULT;
MIB4(mib_test_mode) = RAY_MIB_TEST_MODE_DEFAULT;
MIB4(mib_test_min_chan) = RAY_MIB_TEST_MIN_CHAN_DEFAULT;
MIB4(mib_test_max_chan) = RAY_MIB_TEST_MAX_CHAN_DEFAULT;
/*
* Firmware version 5 defaults - see if_raymib.h for details
*/
MIB5(mib_net_type) = sc->sc_d.np_net_type;
MIB4(mib_ap_status) = sc->sc_d.np_ap_status;
bcopy(sc->sc_d.np_ssid, MIB5(mib_ssid), IEEE80211_NWID_LEN);
MIB5(mib_scan_mode) = RAY_MIB_SCAN_MODE_DEFAULT;
MIB5(mib_apm_mode) = RAY_MIB_APM_MODE_DEFAULT;
bcopy(sc->sc_station_addr, MIB5(mib_mac_addr), ETHER_ADDR_LEN);
PUT2(MIB5(mib_frag_thresh), RAY_MIB_FRAG_THRESH_DEFAULT);
PUT2(MIB5(mib_dwell_time), RAY_MIB_DWELL_TIME_V5);
PUT2(MIB5(mib_beacon_period), RAY_MIB_BEACON_PERIOD_V5);
MIB5(mib_dtim_interval) = RAY_MIB_DTIM_INTERVAL_DEFAULT;
MIB5(mib_max_retry) = RAY_MIB_MAX_RETRY_DEFAULT;
MIB5(mib_ack_timo) = RAY_MIB_ACK_TIMO_DEFAULT;
MIB5(mib_sifs) = RAY_MIB_SIFS_DEFAULT;
MIB5(mib_difs) = RAY_MIB_DIFS_DEFAULT;
MIB5(mib_pifs) = RAY_MIB_PIFS_V5;
PUT2(MIB5(mib_rts_thresh), RAY_MIB_RTS_THRESH_DEFAULT);
PUT2(MIB5(mib_scan_dwell), RAY_MIB_SCAN_DWELL_V5);
PUT2(MIB5(mib_scan_max_dwell), RAY_MIB_SCAN_MAX_DWELL_V5);
MIB5(mib_assoc_timo) = RAY_MIB_ASSOC_TIMO_DEFAULT;
MIB5(mib_adhoc_scan_cycle) = RAY_MIB_ADHOC_SCAN_CYCLE_DEFAULT;
MIB5(mib_infra_scan_cycle) = RAY_MIB_INFRA_SCAN_CYCLE_DEFAULT;
MIB5(mib_infra_super_scan_cycle)
= RAY_MIB_INFRA_SUPER_SCAN_CYCLE_DEFAULT;
MIB5(mib_promisc) = RAY_MIB_PROMISC_DEFAULT;
PUT2(MIB5(mib_uniq_word), RAY_MIB_UNIQ_WORD_DEFAULT);
MIB5(mib_slot_time) = RAY_MIB_SLOT_TIME_V5;
MIB5(mib_roam_low_snr_thresh) = RAY_MIB_ROAM_LOW_SNR_THRESH_DEFAULT;
MIB5(mib_low_snr_count) = RAY_MIB_LOW_SNR_COUNT_DEFAULT;
MIB5(mib_infra_missed_beacon_count)
= RAY_MIB_INFRA_MISSED_BEACON_COUNT_DEFAULT;
MIB5(mib_adhoc_missed_beacon_count)
= RAY_MIB_ADHOC_MISSED_BEACON_COUNT_DEFAULT;
MIB5(mib_country_code) = RAY_MIB_COUNTRY_CODE_DEFAULT;
MIB5(mib_hop_seq) = RAY_MIB_HOP_SEQ_DEFAULT;
MIB5(mib_hop_seq_len) = RAY_MIB_HOP_SEQ_LEN_V5;
PUT2(MIB5(mib_cw_max), RAY_MIB_CW_MAX_V5);
PUT2(MIB5(mib_cw_min), RAY_MIB_CW_MIN_V5);
MIB5(mib_noise_filter_gain) = RAY_MIB_NOISE_FILTER_GAIN_DEFAULT;
MIB5(mib_noise_limit_offset) = RAY_MIB_NOISE_LIMIT_OFFSET_DEFAULT;
MIB5(mib_rssi_thresh_offset) = RAY_MIB_RSSI_THRESH_OFFSET_DEFAULT;
MIB5(mib_busy_thresh_offset) = RAY_MIB_BUSY_THRESH_OFFSET_DEFAULT;
MIB5(mib_sync_thresh) = RAY_MIB_SYNC_THRESH_DEFAULT;
MIB5(mib_test_mode) = RAY_MIB_TEST_MODE_DEFAULT;
MIB5(mib_test_min_chan) = RAY_MIB_TEST_MIN_CHAN_DEFAULT;
MIB5(mib_test_max_chan) = RAY_MIB_TEST_MAX_CHAN_DEFAULT;
MIB5(mib_allow_probe_resp) = RAY_MIB_ALLOW_PROBE_RESP_DEFAULT;
MIB5(mib_privacy_must_start) = sc->sc_d.np_priv_start;
MIB5(mib_privacy_can_join) = sc->sc_d.np_priv_join;
MIB5(mib_basic_rate_set[0]) = sc->sc_d.np_def_txrate;
if (sc->sc_version == RAY_ECFS_BUILD_4)
SRAM_WRITE_REGION(sc, RAY_HOST_TO_ECF_BASE,
&ray_mib_4_default, sizeof(ray_mib_4_default));
else
SRAM_WRITE_REGION(sc, RAY_HOST_TO_ECF_BASE,
&ray_mib_5_default, sizeof(ray_mib_5_default));
(void)ray_ccs_alloc(sc, &com->c_ccs, RAY_CMD_DOWNLOAD_PARAMS, 0);
ray_com_ecf(sc, com);
}
/*
* Download completion routine
*/
static void
ray_init_download_done(struct ray_softc *sc, size_t ccs)
{
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_STARTJOIN, "");
RAY_COM_CHECK(sc, ccs);
/*
* Fake the current network parameter settings so start_join_net
* will not bother updating them to the card (we would need to
* zero these anyway, so we might as well copy).
*/
sc->sc_c.np_net_type = sc->sc_d.np_net_type;
bcopy(sc->sc_d.np_ssid, sc->sc_c.np_ssid, IEEE80211_NWID_LEN);
ray_com_ecf_done(sc);
}
/*
* Runq entry to starting or joining a network
*/
static void
ray_init_sj(struct ray_softc *sc, struct ray_comq_entry *com)
{
struct ray_net_params np;
int update;
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_STARTJOIN, "");
RAY_MAP_CM(sc);
sc->sc_havenet = 0;
if (sc->sc_d.np_net_type == RAY_MIB_NET_TYPE_ADHOC)
(void)ray_ccs_alloc(sc, &com->c_ccs, RAY_CMD_START_NET, 0);
else
(void)ray_ccs_alloc(sc, &com->c_ccs, RAY_CMD_JOIN_NET, 0);
update = 0;
if (sc->sc_c.np_net_type != sc->sc_d.np_net_type)
update++;
if (bcmp(sc->sc_c.np_ssid, sc->sc_d.np_ssid, IEEE80211_NWID_LEN))
update++;
if (sc->sc_c.np_priv_join != sc->sc_d.np_priv_join)
update++;
if (sc->sc_c.np_priv_start != sc->sc_d.np_priv_start)
update++;
RAY_DPRINTF(sc, RAY_DBG_STARTJOIN,
"%s updating nw params", update?"is":"not");
if (update) {
bzero(&np, sizeof(np));
np.p_net_type = sc->sc_d.np_net_type;
bcopy(sc->sc_d.np_ssid, np.p_ssid, IEEE80211_NWID_LEN);
np.p_privacy_must_start = sc->sc_d.np_priv_start;
np.p_privacy_can_join = sc->sc_d.np_priv_join;
SRAM_WRITE_REGION(sc, RAY_HOST_TO_ECF_BASE, &np, sizeof(np));
SRAM_WRITE_FIELD_1(sc, com->c_ccs, ray_cmd_net, c_upd_param, 1);
} else
SRAM_WRITE_FIELD_1(sc, com->c_ccs, ray_cmd_net, c_upd_param, 0);
ray_com_ecf(sc, com);
}
/*
* Complete start command or intermediate step in assoc command
*/
static void
ray_init_sj_done(struct ray_softc *sc, size_t ccs)
{
struct ifnet *ifp = &sc->arpcom.ac_if;
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_STARTJOIN, "");
RAY_MAP_CM(sc);
RAY_COM_CHECK(sc, ccs);
/*
* Read back network parameters that the ECF sets
*/
SRAM_READ_REGION(sc, ccs, &sc->sc_c.p_1, sizeof(struct ray_cmd_net));
/* adjust values for buggy build 4 */
if (sc->sc_c.np_def_txrate == 0x55)
sc->sc_c.np_def_txrate = sc->sc_d.np_def_txrate;
if (sc->sc_c.np_encrypt == 0x55)
sc->sc_c.np_encrypt = sc->sc_d.np_encrypt;
/*
* Update our local state if we updated the network parameters
* when the START_NET or JOIN_NET was issued.
*/
if (sc->sc_c.np_upd_param) {
RAY_DPRINTF(sc, RAY_DBG_STARTJOIN, "updated parameters");
SRAM_READ_REGION(sc, RAY_HOST_TO_ECF_BASE,
&sc->sc_c.p_2, sizeof(struct ray_net_params));
}
/*
* Hurrah! The network is now active.
*
* Clearing IFF_OACTIVE will ensure that the system will queue
* packets. Just before we return from the interrupt context
* we check to see if packets have been queued.
*/
if (SRAM_READ_FIELD_1(sc, ccs, ray_cmd, c_cmd) == RAY_CMD_START_NET) {
sc->sc_havenet = 1;
ifp->if_flags &= ~IFF_OACTIVE;
}
ray_com_ecf_done(sc);
}
/*
* Runq entry to starting an association with an access point
*/
static void
ray_init_assoc(struct ray_softc *sc, struct ray_comq_entry *com)
{
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_STARTJOIN, "");
RAY_MAP_CM(sc);
(void)ray_ccs_alloc(sc, &com->c_ccs, RAY_CMD_START_ASSOC, 0);
ray_com_ecf(sc, com);
}
/*
* Complete association
*/
static void
ray_init_assoc_done(struct ray_softc *sc, size_t ccs)
{
struct ifnet *ifp = &sc->arpcom.ac_if;
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_STARTJOIN, "");
RAY_COM_CHECK(sc, ccs);
RAY_MAP_CM(sc);
/*
* Hurrah! The network is now active.
*
* Clearing IFF_OACTIVE will ensure that the system will queue
* packets. Just before we return from the interrupt context
* we check to see if packets have been queued.
*/
sc->sc_havenet = 1;
ifp->if_flags &= ~IFF_OACTIVE;
ray_com_ecf_done(sc);
}
/*
* Network stop.
*
* Assumes that a ray_init is used to restart the card.
*
*/
static void
ray_stop(struct ray_softc *sc)
{
struct ifnet *ifp = &sc->arpcom.ac_if;
int s;
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
RAY_MAP_CM(sc);
if (sc->gone) {
RAY_PRINTF(sc, "unloaded");
return;
}
/*
* Clear out timers and sort out driver state
*/
RAY_DPRINTF(sc, RAY_DBG_STOP, "HCS_intr %d RCSI 0x%0x",
RAY_HCS_INTR(sc), SRAM_READ_1(sc, RAY_SCB_RCSI));
RAY_DPRINTF(sc, RAY_DBG_STOP, "ECF ready %d", RAY_ECF_READY(sc));
#if RAY_USE_CALLOUT_STOP
callout_stop(sc->com_timerh);
callout_stop(sc->reset_timerh);
#else
untimeout(ray_com_ecf_timo, sc, sc->com_timerh);
untimeout(ray_reset_timo, sc, sc->reset_timerh);
#endif /* RAY_USE_CALLOUT_STOP */
untimeout(ray_tx_timo, sc, sc->tx_timerh);
sc->sc_havenet = 0;
sc->sc_rxoverflow = 0;
sc->sc_rxcksum = 0;
sc->sc_rxhcksum = 0;
sc->sc_rxnoise = 0;
/*
* Inhibit card - if we can't prevent reception then do not worry;
* stopping a NIC only guarantees no TX.
*/
s = splimp();
/* XXX what does the SHUTDOWN command do? Or power saving in COR */
splx(s);
/*
* Mark as not running
*/
ifp->if_flags &= ~IFF_RUNNING;
ifp->if_flags &= ~IFF_OACTIVE;
}
/*
* Reset the card
*
* I'm using the soft reset command in the COR register. I'm not sure
* if the sequence is right but it does seem to do the right thing. A
* nano second after reset is written the flashing light goes out, and
* a few seconds after the default is written the main card light goes
* out. We wait a while and then re-init the card.
*/
static void
ray_reset(struct ray_softc *sc)
{
#if XXX_RESET
struct ifnet *ifp = &sc->arpcom.ac_if;
#endif /* XXX_RESET */
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
RAY_MAP_CM(sc);
#if XXX_RESET
if (ifp->if_flags & IFF_RUNNING)
ray_stop(sc);
RAY_PRINTF(sc, "resetting ECF");
ATTR_WRITE_1(sc, RAY_COR, RAY_COR_RESET);
ATTR_WRITE_1(sc, RAY_COR, RAY_COR_DEFAULT);
sc->reset_timerh = timeout(ray_reset_timo, sc, RAY_RESET_TIMEOUT);
#else
RAY_PRINTF(sc, "skip reset card");
#endif /* XXX_RESET */
}
/*
* Finishing resetting and restarting the card
*/
static void
ray_reset_timo(void *xsc)
{
struct ray_softc *sc = (struct ray_softc *)xsc;
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
RAY_MAP_CM(sc);
if (!RAY_ECF_READY(sc)) {
RAY_DPRINTF(sc, RAY_DBG_RECERR, "ECF busy, re-scheduling self");
sc->reset_timerh = timeout(ray_reset_timo, sc, RAY_RESET_TIMEOUT);
return;
}
RAY_HCS_CLEAR_INTR(sc);
RAY_PRINTF(sc, "XXX need to restart ECF but not in sleepable context");
RAY_PRINTF(sc, "XXX the user routines must restart as required");
}
static void
ray_watchdog(struct ifnet *ifp)
{
struct ray_softc *sc;
sc = ifp->if_softc;
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
RAY_MAP_CM(sc);
if (sc->gone) {
RAY_PRINTF(sc, "unloaded");
return;
}
RAY_PRINTF(sc, "watchdog timeout");
/* XXX may need to have remedial action here
for example
ray_reset
ray_stop
...
ray_init
do we only use on TX?
if so then we should clear OACTIVE etc.
*/
}
/*
* Transmit packet handling
*/
/*
* Start sending a packet.
*
* We make two assumptions here:
* 1) That the current priority is set to splimp _before_ this code
* is called *and* is returned to the appropriate priority after
* return
* 2) That the IFF_OACTIVE flag is checked before this code is called
* (i.e. that the output part of the interface is idle)
*
* A simple one packet at a time TX routine is used - we don't bother
* chaining TX buffers. Performance is sufficient to max out the
* wireless link on a P75. Earlier versions of this used to set
* OACTIVE to add an extra layer of locking. It isn't really needed.
*
* Removing the OACTIVE gives much better performance. Here we
* have this driver on a Libretto, the old driver (OACTIVE)
* on a K6-233 and the Windows driver on a P100. FTPing 2048k
* of zeros.
*
* Nonname box old+FreeBSD-3.4 (K6-233MHz) to
* Libretto 50CT new+FreeBSD-3.1 (75MHz Pentium) 110.77kB/s
* AST J30 Windows 95A (100MHz Pentium) 109.40kB/s
*
* AST J30 Windows 95A (100MHz Pentium) to
* Libretto 50CT new+FreeBSD-3.1 (75MHz Pentium) 167.37kB/s
* Nonname box FreeBSD-3.4 (233MHz AMD K6) 161.82kB/s
*
* Libretto 50CT new+FreeBSD-3.1 (75MHz Pentium) to
* AST J30 Windows 95A (100MHz Pentium) 167.37kB/s
* Nonname box FreeBSD-3.4 (233MHz AMD K6) 161.38kB/s
*
* Given that 160kB/s is saturating the 2Mb/s wireless link we
* are about there.
*
* There is a little test in the code to see how many packets
* could be chained together. For the FTP test this rarely showed
* any and when it did, only two packets were on the queue.
*
* So, in short I'm happy that the added complexity of chaining TX
* packets together isn't worth it for my machines.
*
* Flow is
* get a ccs
* build the packet
* interrupt the card to send the packet
* return
*
* wait for interrupt telling us the packet has been sent
* get called by the interrupt routine if any packets left
*/
static void
ray_tx(struct ifnet *ifp)
{
struct ray_softc *sc;
struct mbuf *m0, *m;
struct ether_header *eh;
size_t ccs, bufp;
int i, pktlen, len;
u_int8_t status;
sc = ifp->if_softc;
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
RAY_MAP_CM(sc);
/*
* Some simple checks first - some are overkill
*/
if (sc->gone) {
RAY_PRINTF(sc, "unloaded");
return;
}
if (!(ifp->if_flags & IFF_RUNNING)) {
RAY_PRINTF(sc, "not running");
return;
}
if (!sc->sc_havenet) {
RAY_PRINTF(sc, "no network");
return;
}
if (!RAY_ECF_READY(sc)) {
/* Can't assume that the ECF is busy because of this driver */
RAY_DPRINTF(sc, RAY_DBG_RECERR, "ECF busy, re-scheduling self");
sc->tx_timerh = timeout(ray_tx_timo, sc, RAY_TX_TIMEOUT);
return;
} else
untimeout(ray_tx_timo, sc, sc->tx_timerh);
/*
* Find a free ccs; if none available wave good bye and exit.
*
* We find a ccs before we process the mbuf so that we are sure it
* is worthwhile processing the packet. All errors in the mbuf
* processing are either errors in the mbuf or gross configuration
* errors and the packet wouldn't get through anyway.
*
* Don't forget to clear the ccs on errors.
*/
i = RAY_CCS_TX_FIRST;
do {
status = SRAM_READ_FIELD_1(sc,
RAY_CCS_ADDRESS(i), ray_cmd, c_status);
if (status == RAY_CCS_STATUS_FREE)
break;
i++;
} while (i <= RAY_CCS_TX_LAST);
if (i > RAY_CCS_TX_LAST) {
ifp->if_flags |= IFF_OACTIVE;
return;
}
RAY_DPRINTF(sc, RAY_DBG_CCS, "using ccs 0x%02x", i);
/*
* Reserve and fill the ccs - must do the length later.
*
* Even though build 4 and build 5 have different fields all these
* are common apart from tx_rate. Neither the NetBSD driver or Linux
* driver bother to overwrite this for build 4 cards.
*
* The start of the buffer must be aligned to a 256 byte boundary
* (least significant byte of address = 0x00).
*/
ccs = RAY_CCS_ADDRESS(i);
bufp = RAY_TX_BASE + i * RAY_TX_BUF_SIZE;
bufp += sc->sc_tibsize;
SRAM_WRITE_FIELD_1(sc, ccs, ray_cmd_tx, c_status, RAY_CCS_STATUS_BUSY);
SRAM_WRITE_FIELD_1(sc, ccs, ray_cmd_tx, c_cmd, RAY_CMD_TX_REQ);
SRAM_WRITE_FIELD_1(sc, ccs, ray_cmd_tx, c_link, RAY_CCS_LINK_NULL);
SRAM_WRITE_FIELD_2(sc, ccs, ray_cmd_tx, c_bufp, bufp);
SRAM_WRITE_FIELD_1(sc,
ccs, ray_cmd_tx, c_tx_rate, sc->sc_c.np_def_txrate);
SRAM_WRITE_FIELD_1(sc, ccs, ray_cmd_tx, c_apm_mode, 0); /* XXX */
bufp += sizeof(struct ray_tx_phy_header);
/*
* Get the mbuf and process it - we have to remember to free the
* ccs if there are any errors
*/
#if XXX_IFQ_PEEK
if (ifp->if_snd.ifq_len > 1)
RAY_PRINTF(sc, "ifq_len %d", ifp->if_snd.ifq_len);
#endif /* XXX_IFQ_PEEK */
IF_DEQUEUE(&ifp->if_snd, m0);
if (m0 == NULL) {
RAY_CCS_FREE(sc, ccs);
return;
}
eh = mtod(m0, struct ether_header *);
for (pktlen = 0, m = m0; m != NULL; m = m->m_next) {
pktlen += m->m_len;
}
if (pktlen > ETHER_MAX_LEN - ETHER_CRC_LEN) {
RAY_DPRINTF(sc, RAY_DBG_RECERR, "mbuf too long %d", pktlen);
RAY_CCS_FREE(sc, ccs);
ifp->if_oerrors++;
m_freem(m0);
return;
}
/* XXX
* I would much prefer to have the complete 802.11 packet dropped to
* the bpf tap and then have a user land program parse the headers
* as needed. This way, tcpdump -w can be used to grab the raw data. If
* needed the 802.11 aware program can "translate" the .11 to ethernet
* for tcpdump -r.
*/
if (ifp->if_bpf)
bpf_mtap(ifp, m0);
/*
* Translation - capability as described earlier
*
* Each case must write the 802.11 header using ray_tx_wrhdr,
* passing a pointer to the ethernet header in and getting a new
* tc buffer pointer. Next remove/modify/addto the 802.3 and 802.2
* headers as needed.
*
* We've pulled up the mbuf for you.
*
*/
if (m0->m_len < sizeof(struct ether_header))
m = m_pullup(m, sizeof(struct ether_header));
if (m0 == NULL) {
RAY_DPRINTF(sc, RAY_DBG_RECERR, "could not pullup ether");
RAY_CCS_FREE(sc, ccs);
ifp->if_oerrors++;
return;
}
switch (sc->translation) {
case SC_TRANSLATE_WEBGEAR:
bufp = ray_tx_wrhdr(sc, eh, bufp);
break;
default:
RAY_PRINTF(sc, "unknown translation type %d", sc->translation);
RAY_CCS_FREE(sc, ccs);
ifp->if_oerrors++;
m_freem(m0);
return;
}
if (m0 == NULL) {
RAY_DPRINTF(sc, RAY_DBG_RECERR, "could not translate mbuf");
RAY_CCS_FREE(sc, ccs);
ifp->if_oerrors++;
return;
}
/*
* Copy the mbuf to the buffer in common memory
*
* We panic and don't bother wrapping as ethernet packets are 1518
* bytes, we checked the mbuf earlier, and our TX buffers are 2048
* bytes. We don't have 530 bytes of headers etc. so something
* must be fubar.
*/
pktlen = sizeof(struct ieee80211_header);
for (m = m0; m != NULL; m = m->m_next) {
pktlen += m->m_len;
if ((len = m->m_len) == 0)
continue;
if ((bufp + len) < RAY_TX_END)
SRAM_WRITE_REGION(sc, bufp, mtod(m, u_int8_t *), len);
else
RAY_PANIC(sc, "tx buffer overflow");
bufp += len;
}
RAY_MBUF_DUMP(sc, m0, "ray_tx");
/*
* Fill in a few loose ends and kick the card to send the packet
*/
if (!RAY_ECF_READY(sc)) {
/*
* XXX From NetBSD code:
*
* XXX If this can really happen perhaps we need to save
* XXX the chain and use it later. I think this might
* XXX be a confused state though because we check above
* XXX and don't issue any commands between.
*/
RAY_PRINTF(sc, "ECF busy, dropping packet");
RAY_CCS_FREE(sc, ccs);
ifp->if_oerrors++;
return;
}
SRAM_WRITE_FIELD_2(sc, ccs, ray_cmd_tx, c_len, pktlen);
SRAM_WRITE_FIELD_1(sc, ccs, ray_cmd_tx, c_antenna,
ray_tx_best_antenna(sc, eh->ether_dhost));
SRAM_WRITE_1(sc, RAY_SCB_CCSI, RAY_CCS_INDEX(ccs));
RAY_ECF_START_CMD(sc);
ifp->if_opackets++;
m_freem(m0);
}
/*
* Start timeout routine.
*
* Used when card was busy but we needed to send a packet.
*/
static void
ray_tx_timo(void *xsc)
{
struct ray_softc *sc = (struct ray_softc *)xsc;
struct ifnet *ifp = &sc->arpcom.ac_if;
int s;
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
RAY_MAP_CM(sc);
if (!(ifp->if_flags & IFF_OACTIVE) && (ifp->if_snd.ifq_head != NULL)) {
s = splimp();
ray_tx(ifp);
splx(s);
}
}
/*
* Write an 802.11 header into the TX buffer and return the
* adjusted buffer pointer.
*/
static size_t
ray_tx_wrhdr(struct ray_softc *sc, struct ether_header *eh, size_t bufp)
{
struct ieee80211_header header;
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
RAY_MAP_CM(sc);
bzero(&header, sizeof(struct ieee80211_header));
header.i_fc[0] = (IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_DATA);
if (sc->sc_c.np_net_type == RAY_MIB_NET_TYPE_ADHOC) {
header.i_fc[1] = IEEE80211_FC1_STA_TO_STA;
bcopy(eh->ether_dhost, header.i_addr1, ETHER_ADDR_LEN);
bcopy(eh->ether_shost, header.i_addr2, ETHER_ADDR_LEN);
bcopy(sc->sc_c.np_bss_id, header.i_addr3, ETHER_ADDR_LEN);
} else {
if (sc->sc_c.np_ap_status == RAY_MIB_AP_STATUS_TERMINAL) {
header.i_fc[1] = IEEE80211_FC1_STA_TO_AP;
bcopy(sc->sc_c.np_bss_id, header.i_addr1,
ETHER_ADDR_LEN);
bcopy(eh->ether_shost, header.i_addr2, ETHER_ADDR_LEN);
bcopy(eh->ether_dhost, header.i_addr3, ETHER_ADDR_LEN);
} else
RAY_PANIC(sc, "can't be an AP yet");
}
SRAM_WRITE_REGION(sc, bufp, (u_int8_t *)&header,
sizeof(struct ieee80211_header));
return (bufp + sizeof(struct ieee80211_header));
}
/*
* Determine best antenna to use from rx level and antenna cache
*/
static u_int8_t
ray_tx_best_antenna(struct ray_softc *sc, u_int8_t *dst)
{
struct ray_siglev *sl;
int i;
u_int8_t antenna;
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
RAY_MAP_CM(sc);
if (sc->sc_version == RAY_ECFS_BUILD_4)
return (0);
/* try to find host */
for (i = 0; i < RAY_NSIGLEVRECS; i++) {
sl = &sc->sc_siglevs[i];
if (bcmp(sl->rsl_host, dst, ETHER_ADDR_LEN) == 0)
goto found;
}
/* not found, return default setting */
return (0);
found:
/* This is a simple thresholding scheme which takes the mean
* of the best antenna history. This is okay but as it is a
* filter, it adds a bit of lag in situations where the
* best antenna swaps from one side to the other slowly. Don't know
* how likely this is given the horrible fading though.
*/
antenna = 0;
for (i = 0; i < RAY_NANTENNA; i++) {
antenna += sl->rsl_antennas[i];
}
return (antenna > (RAY_NANTENNA >> 1));
}
/*
* Transmit now complete so clear ccs and network flags.
*/
static void
ray_tx_done(struct ray_softc *sc, size_t ccs)
{
struct ifnet *ifp = &sc->arpcom.ac_if;
char *ss[] = RAY_CCS_STATUS_STRINGS;
u_int8_t status;
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
RAY_MAP_CM(sc);
status = SRAM_READ_FIELD_1(sc, ccs, ray_cmd, c_status);
if (status != RAY_CCS_STATUS_COMPLETE) {
RAY_PRINTF(sc, "tx completed but status is %s", ss[status]);
ifp->if_oerrors++;
}
RAY_CCS_FREE(sc, ccs);
ifp->if_timer = 0;
if (ifp->if_flags & IFF_OACTIVE)
ifp->if_flags &= ~IFF_OACTIVE;
}
/*
* Receiver packet handling
*/
/*
* Receive a packet from the card
*/
static void
ray_rx(struct ray_softc *sc, size_t rcs)
{
struct ieee80211_header *header;
struct ether_header *eh;
struct ifnet *ifp = &sc->arpcom.ac_if;
struct mbuf *m0;
size_t pktlen, fraglen, readlen, tmplen;
size_t bufp, ebufp;
u_int8_t *dst, *src;
u_int8_t fc;
u_int8_t siglev, antenna;
u_int first, ni, i;
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
RAY_MAP_CM(sc);
RAY_DPRINTF(sc, RAY_DBG_CCS, "using rcs 0x%x", rcs);
m0 = NULL;
readlen = 0;
/*
* Get first part of packet and the length. Do some sanity checks
* and get a mbuf.
*/
first = RAY_CCS_INDEX(rcs);
pktlen = SRAM_READ_FIELD_2(sc, rcs, ray_cmd_rx, c_pktlen);
siglev = SRAM_READ_FIELD_1(sc, rcs, ray_cmd_rx, c_siglev);
antenna = SRAM_READ_FIELD_1(sc, rcs, ray_cmd_rx, c_antenna);
if ((pktlen > MCLBYTES) || (pktlen < sizeof(struct ieee80211_header))) {
RAY_DPRINTF(sc, RAY_DBG_RECERR, "packet too big or too small");
ifp->if_ierrors++;
goto skip_read;
}
MGETHDR(m0, M_DONTWAIT, MT_DATA);
if (m0 == NULL) {
RAY_DPRINTF(sc, RAY_DBG_RECERR, "MGETHDR failed");
ifp->if_ierrors++;
goto skip_read;
}
if (pktlen > MHLEN) {
MCLGET(m0, M_DONTWAIT);
if (!(m0->m_flags & M_EXT)) {
RAY_DPRINTF(sc, RAY_DBG_RECERR, "MCLGET failed");
ifp->if_ierrors++;
m_freem(m0);
m0 = NULL;
goto skip_read;
}
}
m0->m_pkthdr.rcvif = ifp;
m0->m_pkthdr.len = pktlen;
m0->m_len = pktlen;
dst = mtod(m0, u_int8_t *);
/*
* Walk the fragment chain to build the complete packet.
*
* The use of two index variables removes a race with the
* hardware. If one index were used the clearing of the CCS would
* happen before reading the next pointer and the hardware can get in.
* Not my idea but verbatim from the NetBSD driver.
*/
i = ni = first;
while ((i = ni) && (i != RAY_CCS_LINK_NULL)) {
rcs = RAY_CCS_ADDRESS(i);
ni = SRAM_READ_FIELD_1(sc, rcs, ray_cmd_rx, c_nextfrag);
bufp = SRAM_READ_FIELD_2(sc, rcs, ray_cmd_rx, c_bufp);
fraglen = SRAM_READ_FIELD_2(sc, rcs, ray_cmd_rx, c_len);
RAY_DPRINTF(sc, RAY_DBG_RX,
"frag index %d len %d bufp 0x%x ni %d",
i, fraglen, (int)bufp, ni);
if (fraglen + readlen > pktlen) {
RAY_DPRINTF(sc, RAY_DBG_RECERR,
"bad length current 0x%x pktlen 0x%x",
fraglen + readlen, pktlen);
ifp->if_ierrors++;
m_freem(m0);
m0 = NULL;
goto skip_read;
}
if ((i < RAY_RCS_FIRST) || (i > RAY_RCS_LAST)) {
RAY_PRINTF(sc, "bad rcs index 0x%x", i);
ifp->if_ierrors++;
m_freem(m0);
m0 = NULL;
goto skip_read;
}
ebufp = bufp + fraglen;
if (ebufp <= RAY_RX_END)
SRAM_READ_REGION(sc, bufp, dst, fraglen);
else {
SRAM_READ_REGION(sc, bufp, dst,
(tmplen = RAY_RX_END - bufp));
SRAM_READ_REGION(sc, RAY_RX_BASE, dst + tmplen,
ebufp - RAY_RX_END);
}
dst += fraglen;
readlen += fraglen;
}
skip_read:
/*
* Walk the chain again to free the rcss.
*/
i = ni = first;
while ((i = ni) && (i != RAY_CCS_LINK_NULL)) {
rcs = RAY_CCS_ADDRESS(i);
ni = SRAM_READ_FIELD_1(sc, rcs, ray_cmd_rx, c_nextfrag);
RAY_CCS_FREE(sc, rcs);
}
if (m0 == NULL)
return;
RAY_MBUF_DUMP(sc, m0, "ray_rx");
/*
* Check the 802.11 packet type and obtain the .11 src addresses.
*
* XXX CTL and MGT packets will have separate functions, DATA here
*
* XXX This needs some work for INFRA mode
*/
header = mtod(m0, struct ieee80211_header *);
fc = header->i_fc[0];
if ((fc & IEEE80211_FC0_VERSION_MASK) != IEEE80211_FC0_VERSION_0) {
RAY_DPRINTF(sc, RAY_DBG_RECERR,
"header not version 0 fc 0x%x", fc);
ifp->if_ierrors++;
m_freem(m0);
return;
}
switch (fc & IEEE80211_FC0_TYPE_MASK) {
case IEEE80211_FC0_TYPE_MGT:
RAY_PRINTF(sc, "unexpected MGT packet");
ifp->if_ierrors++;
m_freem(m0);
return;
case IEEE80211_FC0_TYPE_CTL:
RAY_PRINTF(sc, "unexpected CTL packet");
ifp->if_ierrors++;
m_freem(m0);
return;
case IEEE80211_FC0_TYPE_DATA:
RAY_DPRINTF(sc, RAY_DBG_RX, "got a DATA packet");
break;
default:
RAY_PRINTF(sc, "unknown packet fc0 0x%x", fc);
ifp->if_ierrors++;
m_freem(m0);
return;
}
fc = header->i_fc[1];
src = header->i_addr2;
switch (fc & IEEE80211_FC1_DS_MASK) {
case IEEE80211_FC1_STA_TO_STA:
RAY_DPRINTF(sc, RAY_DBG_RX, "packet from sta %6D",
src, ":");
break;
case IEEE80211_FC1_STA_TO_AP:
RAY_DPRINTF(sc, RAY_DBG_RX, "packet from sta to ap %6D %6D",
src, ":", header->i_addr3, ":");
ifp->if_ierrors++;
m_freem(m0);
break;
case IEEE80211_FC1_AP_TO_STA:
RAY_DPRINTF(sc, RAY_DBG_RX, "packet from ap %6D",
src, ":");
ifp->if_ierrors++;
m_freem(m0);
break;
case IEEE80211_FC1_AP_TO_AP:
RAY_DPRINTF(sc, RAY_DBG_RX, "packet between aps %6D %6D",
src, ":", header->i_addr2, ":");
ifp->if_ierrors++;
m_freem(m0);
return;
default:
src = NULL;
RAY_PRINTF(sc, "unknown packet fc1 0x%x", fc);
ifp->if_ierrors++;
m_freem(m0);
return;
}
/*
* Translation - capability as described earlier
*
* Each case must remove the 802.11 header and leave an 802.3
* header in the mbuf copy addresses as needed.
*/
switch (sc->translation) {
case SC_TRANSLATE_WEBGEAR:
/* Nice and easy - just trim the 802.11 header */
m_adj(m0, sizeof(struct ieee80211_header));
break;
default:
RAY_PRINTF(sc, "unknown translation type %d", sc->translation);
ifp->if_ierrors++;
m_freem(m0);
return;
}
/*
* Finally, do a bit of house keeping before sending the packet
* up the stack.
*/
ifp->if_ipackets++;
ray_rx_update_cache(sc, src, siglev, antenna);
if (ifp->if_bpf)
bpf_mtap(ifp, m0);
eh = mtod(m0, struct ether_header *);
m_adj(m0, sizeof(struct ether_header));
ether_input(ifp, eh, m0);
return;
}
/*
* Update rx level and antenna cache
*/
static void
ray_rx_update_cache(struct ray_softc *sc, u_int8_t *src, u_int8_t siglev, u_int8_t antenna)
{
struct timeval mint;
struct ray_siglev *sl;
int i, mini;
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
/* Try to find host */
for (i = 0; i < RAY_NSIGLEVRECS; i++) {
sl = &sc->sc_siglevs[i];
if (bcmp(sl->rsl_host, src, ETHER_ADDR_LEN) == 0)
goto found;
}
/* Not found, find oldest slot */
mini = 0;
mint.tv_sec = LONG_MAX;
mint.tv_usec = 0;
for (i = 0; i < RAY_NSIGLEVRECS; i++) {
sl = &sc->sc_siglevs[i];
if (timevalcmp(&sl->rsl_time, &mint, <)) {
mini = i;
mint = sl->rsl_time;
}
}
sl = &sc->sc_siglevs[mini];
bzero(sl->rsl_siglevs, RAY_NSIGLEV);
bzero(sl->rsl_antennas, RAY_NANTENNA);
bcopy(src, sl->rsl_host, ETHER_ADDR_LEN);
found:
microtime(&sl->rsl_time);
bcopy(sl->rsl_siglevs, &sl->rsl_siglevs[1], RAY_NSIGLEV-1);
sl->rsl_siglevs[0] = siglev;
if (sc->sc_version != RAY_ECFS_BUILD_4) {
bcopy(sl->rsl_antennas, &sl->rsl_antennas[1], RAY_NANTENNA-1);
sl->rsl_antennas[0] = antenna;
}
}
/*
* Interrupt handling
*/
/*
* Process an interrupt
*/
static void
ray_intr(void *xsc)
{
struct ray_softc *sc = (struct ray_softc *)xsc;
struct ifnet *ifp = &sc->arpcom.ac_if;
size_t ccs;
u_int8_t cmd;
int ccsi, count;
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
RAY_MAP_CM(sc);
if (sc->gone) {
RAY_PRINTF(sc, "unloaded");
return;
}
/*
* Check that the interrupt was for us, if so get the rcs/ccs
* and vector on the command contained within it.
*/
if (!RAY_HCS_INTR(sc))
count = 0;
else {
count = 1;
ccsi = SRAM_READ_1(sc, RAY_SCB_RCSI);
ccs = RAY_CCS_ADDRESS(ccsi);
cmd = SRAM_READ_FIELD_1(sc, ccs, ray_cmd, c_cmd);
if (ccsi <= RAY_CCS_LAST)
ray_intr_ccs(sc, cmd, ccs);
else if (ccsi <= RAY_RCS_LAST)
ray_intr_rcs(sc, cmd, ccs);
else
RAY_PRINTF(sc, "bad ccs index 0x%x", ccsi);
}
if (count)
RAY_HCS_CLEAR_INTR(sc);
RAY_DPRINTF(sc, RAY_DBG_RX, "interrupt %s handled", count?"was":"not");
/* Send any packets lying around and update error counters */
if (!(ifp->if_flags & IFF_OACTIVE) && (ifp->if_snd.ifq_head != NULL))
ray_tx(ifp);
if ((++sc->sc_checkcounters % 32) == 0)
ray_intr_updt_errcntrs(sc);
}
/*
* Read the error counters.
*/
static void
ray_intr_updt_errcntrs(struct ray_softc *sc)
{
size_t csc;
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
RAY_MAP_CM(sc);
/*
* The card implements the following protocol to keep the
* values from being changed while read: It checks the `own'
* bit and if zero writes the current internal counter value,
* it then sets the `own' bit to 1. If the `own' bit was 1 it
* incremenets its internal counter. The user thus reads the
* counter if the `own' bit is one and then sets the own bit
* to 0.
*/
csc = RAY_STATUS_BASE;
if (SRAM_READ_FIELD_1(sc, csc, ray_csc, csc_mrxo_own)) {
sc->sc_rxoverflow +=
SRAM_READ_FIELD_2(sc, csc, ray_csc, csc_mrx_overflow);
SRAM_WRITE_FIELD_1(sc, csc, ray_csc, csc_mrxo_own, 0);
}
if (SRAM_READ_FIELD_1(sc, csc, ray_csc, csc_mrxc_own)) {
sc->sc_rxcksum +=
SRAM_READ_FIELD_2(sc, csc, ray_csc, csc_mrx_overflow);
SRAM_WRITE_FIELD_1(sc, csc, ray_csc, csc_mrxc_own, 0);
}
if (SRAM_READ_FIELD_1(sc, csc, ray_csc, csc_rxhc_own)) {
sc->sc_rxhcksum +=
SRAM_READ_FIELD_2(sc, csc, ray_csc, csc_rx_hcksum);
SRAM_WRITE_FIELD_1(sc, csc, ray_csc, csc_rxhc_own, 0);
}
sc->sc_rxnoise = SRAM_READ_FIELD_1(sc, csc, ray_csc, csc_rx_noise);
}
/*
* Process CCS command completion
*/
static void
ray_intr_ccs(struct ray_softc *sc, u_int8_t cmd, size_t ccs)
{
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
RAY_MAP_CM(sc);
/* XXX replace this with a jump table? */
switch (cmd) {
case RAY_CMD_DOWNLOAD_PARAMS:
RAY_DPRINTF(sc, RAY_DBG_COM, "START_PARAMS");
ray_init_download_done(sc, ccs);
break;
case RAY_CMD_UPDATE_PARAMS:
RAY_DPRINTF(sc, RAY_DBG_COM, "UPDATE_PARAMS");
ray_upparams_done(sc, ccs);
break;
case RAY_CMD_REPORT_PARAMS:
RAY_DPRINTF(sc, RAY_DBG_COM, "REPORT_PARAMS");
ray_repparams_done(sc, ccs);
break;
case RAY_CMD_UPDATE_MCAST:
RAY_DPRINTF(sc, RAY_DBG_COM, "UPDATE_MCAST");
ray_mcast_done(sc, ccs);
break;
case RAY_CMD_START_NET:
case RAY_CMD_JOIN_NET:
RAY_DPRINTF(sc, RAY_DBG_COM, "START|JOIN_NET");
ray_init_sj_done(sc, ccs);
break;
case RAY_CMD_TX_REQ:
RAY_DPRINTF(sc, RAY_DBG_COM, "TX_REQ");
ray_tx_done(sc, ccs);
goto done;
case RAY_CMD_START_ASSOC:
RAY_DPRINTF(sc, RAY_DBG_COM, "START_ASSOC");
ray_init_assoc_done(sc, ccs);
break;
case RAY_CMD_UPDATE_APM:
RAY_PRINTF(sc, "unexpected UPDATE_APM");
break;
case RAY_CMD_TEST_MEM:
RAY_PRINTF(sc, "unexpected TEST_MEM");
break;
case RAY_CMD_SHUTDOWN:
RAY_PRINTF(sc, "unexpected SHUTDOWN");
break;
case RAY_CMD_DUMP_MEM:
RAY_PRINTF(sc, "unexpected DUMP_MEM");
break;
case RAY_CMD_START_TIMER:
RAY_PRINTF(sc, "unexpected START_TIMER");
break;
default:
RAY_PRINTF(sc, "unknown command 0x%x", cmd);
break;
}
ray_ccs_free(sc, ccs);
done:
/*
* See if needed things can be done now that a command has completed
*/
ray_com_runq(sc);
}
/*
* Process ECF command request
*/
static void
ray_intr_rcs(struct ray_softc *sc, u_int8_t cmd, size_t rcs)
{
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
RAY_MAP_CM(sc);
/* XXX replace this with a jump table? */
switch (cmd) {
case RAY_ECMD_RX_DONE:
RAY_DPRINTF(sc, RAY_DBG_CCS, "RX_DONE");
ray_rx(sc, rcs);
break;
case RAY_ECMD_REJOIN_DONE:
RAY_DPRINTF(sc, RAY_DBG_CCS, "REJOIN_DONE");
sc->sc_havenet = 1; /* XXX Should not be here but in function */
break;
case RAY_ECMD_ROAM_START:
RAY_DPRINTF(sc, RAY_DBG_CCS, "ROAM_START");
sc->sc_havenet = 0; /* XXX Should not be here but in function */
break;
case RAY_ECMD_JAPAN_CALL_SIGNAL:
RAY_PRINTF(sc, "unexpected JAPAN_CALL_SIGNAL");
break;
default:
RAY_PRINTF(sc, "unknown command 0x%x", cmd);
break;
}
RAY_CCS_FREE(sc, rcs);
}
#if XXX_MCAST
/*
* XXX First cut at this code - have not tried compiling it yet. V. confusing
* XXX interactions between allmulti, promisc and mcast. Going to leave it
* XXX for now.
* XXX Don't like the code bloat to set promisc up - we use it here, ray_init,
* XXX ray_promisc_user and ray_upparams_user...
*/
/*
* User land entry to multicast list changes
*/
static int
ray_mcast_user(struct ray_softc *sc)
{
struct ifnet *ifp = &sc->arpcom.ac_if;
struct ray_comq_entry *com[2];
int error, count;
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
/*
* The multicast list is only 16 items long so use promiscuous
* mode if needed.
*
* We track this stuff even when not running.
*/
for (ifma = ifp->if_multiaddrs.lh_first, count = 0; ifma != NULL;
ifma = ifma->ifma_link.le_next, count++)
if (count > 16)
ifp->if_flags |= IFF_ALLMULTI;
else if (ifp->if_flags & IFF_ALLMULTI)
ifp->if_flags &= ~IFF_ALLMULTI;
if (!(ifp->if_flags & IFF_RUNNING)) {
return (0);
}
/*
* If we need to change the promiscuous mode then do so.
*/
if (sc->promisc != !!(ifp->if_flags & (IFF_PROMISC|IFF_ALLMULTI))) {
MALLOC(com[0], struct ray_comq_entry *,
sizeof(struct ray_comq_entry), M_RAYCOM, M_WAITOK);
RAY_COM_FUNCTION(com[0],ray_promisc);
com[0]->c_flags = RAY_COM_FWOK;
com[0]->c_retval = 0;
com[0]->c_ccs = NULL;
com[0]->c_wakeup = com[1];
ray_com_runq_add(sc, com[0]);
} else
com[0] = NULL;
/*
* If we need to set the mcast list then do so.
*/
if (!(ifp->if_flags & IFF_ALLMULTI))
MALLOC(com[1], struct ray_comq_entry *,
sizeof(struct ray_comq_entry), M_RAYCOM, M_WAITOK);
RAY_COM_FUNCTION(com[1], ray_mcast);
com[0]->c_flags &= ~RAY_COM_FWOK;
com[1]->c_flags = RAY_COM_FWOK;
com[1]->c_retval = 0;
com[1]->c_ccs = NULL;
com[1]->c_wakeup = com[1];
ray_com_runq_add(sc, com[1]);
} else
com[1] = NULL;
ray_com_runq(sc);
RAY_DPRINTF(sc, RAY_DBG_COM, "sleeping");
(void)tsleep(com[1], 0, "raymcast", 0);
RAY_DPRINTF(sc, RAY_DBG_COM, "awakened");
error = com->c_retval;
if (com[0] != NULL)
FREE(com[0], M_RAYCOM);
if (com[1] != NULL)
FREE(com[1], M_RAYCOM);
return (error);
}
/*
* Runq entry to setting the multicast filter list
*/
static void
ray_mcast(struct ray_softc *sc, struct ray_comq_entry *com)
{
struct ifnet *ifp = &sc->arpcom.ac_if;
struct ifmultiaddr *ifma;
size_t bufp;
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
RAY_MAP_CM(sc);
(void)ray_ccs_alloc(sc, &com->c_ccs, RAY_CMD_UPDATE_MCAST, 0);
SRAM_WRITE_FIELD_1(sc, &com->c_ccs,
ray_cmd_update_mcast, c_nmcast, count);
bufp = RAY_HOST_TO_ECF_BASE;
for (ifma = ifp->if_multiaddrs.lh_first; ifma != NULL;
ifma = ifma->ifma_link.le_next) {
SRAM_WRITE_REGION(
sc,
bufp,
LLADDR((struct sockaddr_dl *)ifma->ifma_addr),
ETHER_ADDR_LEN
);
bufp += ETHER_ADDR_LEN;
}
ray_com_ecf(sc, com);
}
/*
* Complete the multicast filter list update
*/
static void
ray_mcast_done(struct ray_softc *sc, size_t ccs)
{
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
RAY_COM_CHECK(sc, ccs);
ray_com_ecf_done(sc);
}
#else
static int ray_mcast_user(struct ray_softc *sc) {return (0);}
static void ray_mcast(struct ray_softc *sc, struct ray_comq_entry *com) {}
static void ray_mcast_done(struct ray_softc *sc, size_t ccs) {}
#endif /* XXX_MCAST */
/*
* User land entry to promiscuous mode change
*/
static int
ray_promisc_user(struct ray_softc *sc)
{
struct ray_comq_entry *com[1];
int error, ncom, i;
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
ncom = 0;
com[ncom++] = RAY_COM_MALLOC(ray_promisc, RAY_COM_FWOK);
ray_com_runq_arr(sc, com, ncom, "raypromisc");
error = com[0]->c_retval;
for (i = 0; i < ncom; i++)
FREE(com[i], M_RAYCOM);
return (error);
}
/*
* Runq entry to set/reset promiscuous mode
*/
static void
ray_promisc(struct ray_softc *sc, struct ray_comq_entry *com)
{
struct ifnet *ifp = &sc->arpcom.ac_if;
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
RAY_MAP_CM(sc);
(void)ray_ccs_alloc(sc, &com->c_ccs, RAY_CMD_UPDATE_PARAMS, 0);
SRAM_WRITE_FIELD_1(sc, com->c_ccs,
ray_cmd_update, c_paramid, RAY_MIB_PROMISC);
SRAM_WRITE_FIELD_1(sc, com->c_ccs, ray_cmd_update, c_nparam, 1);
SRAM_WRITE_1(sc, RAY_HOST_TO_ECF_BASE,
!!(ifp->if_flags & (IFF_PROMISC|IFF_ALLMULTI)));
ray_com_ecf(sc, com);
}
/*
* User land entry to parameter reporting
*/
static int
ray_repparams_user(struct ray_softc *sc, struct ray_param_req *pr)
{
struct ifnet *ifp = &sc->arpcom.ac_if;
struct ray_comq_entry *com[1];
int error, ncom, i;
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
if (!(ifp->if_flags & IFF_RUNNING)) {
pr->r_failcause = RAY_FAILCAUSE_EDEVSTOP;
return (EIO);
}
/*
* Test for illegal values or immediate responses
*/
if (pr->r_paramid > RAY_MIB_MAX)
return (EINVAL);
if ((sc->sc_version == RAY_ECFS_BUILD_4) &&
!(mib_info[pr->r_paramid][0] & RAY_V4))
return (EINVAL);
if ((sc->sc_version == RAY_ECFS_BUILD_5) &&
!(mib_info[pr->r_paramid][0] & RAY_V5))
return (EINVAL);
if (pr->r_paramid > RAY_MIB_LASTUSER) {
switch (pr->r_paramid) {
case RAY_MIB_VERSION:
if (sc->sc_version == RAY_ECFS_BUILD_4)
*pr->r_data = RAY_V4;
else
*pr->r_data = RAY_V5;
break;
case RAY_MIB_CUR_BSSID:
bcopy(sc->sc_c.np_bss_id, pr->r_data, ETHER_ADDR_LEN);
break;
case RAY_MIB_CUR_INITED:
*pr->r_data = sc->sc_c.np_inited;
break;
case RAY_MIB_CUR_DEF_TXRATE:
*pr->r_data = sc->sc_c.np_def_txrate;
break;
case RAY_MIB_CUR_ENCRYPT:
*pr->r_data = sc->sc_c.np_encrypt;
break;
case RAY_MIB_CUR_NET_TYPE:
*pr->r_data = sc->sc_c.np_net_type;
break;
case RAY_MIB_CUR_SSID:
bcopy(sc->sc_c.np_ssid, pr->r_data, IEEE80211_NWID_LEN);
break;
case RAY_MIB_CUR_PRIV_START:
*pr->r_data = sc->sc_c.np_priv_start;
break;
case RAY_MIB_CUR_PRIV_JOIN:
*pr->r_data = sc->sc_c.np_priv_join;
break;
case RAY_MIB_DES_BSSID:
bcopy(sc->sc_d.np_bss_id, pr->r_data, ETHER_ADDR_LEN);
break;
case RAY_MIB_DES_INITED:
*pr->r_data = sc->sc_d.np_inited;
break;
case RAY_MIB_DES_DEF_TXRATE:
*pr->r_data = sc->sc_d.np_def_txrate;
break;
case RAY_MIB_DES_ENCRYPT:
*pr->r_data = sc->sc_d.np_encrypt;
break;
case RAY_MIB_DES_NET_TYPE:
*pr->r_data = sc->sc_d.np_net_type;
break;
case RAY_MIB_DES_SSID:
bcopy(sc->sc_d.np_ssid, pr->r_data, IEEE80211_NWID_LEN);
break;
case RAY_MIB_DES_PRIV_START:
*pr->r_data = sc->sc_d.np_priv_start;
break;
case RAY_MIB_DES_PRIV_JOIN:
*pr->r_data = sc->sc_d.np_priv_join;
break;
default:
return (EINVAL);
break;
}
pr->r_failcause = 0;
if (sc->sc_version == RAY_ECFS_BUILD_4)
pr->r_len = mib_info[pr->r_paramid][RAY_MIB_INFO_SIZ4];
else if (sc->sc_version == RAY_ECFS_BUILD_5)
pr->r_len = mib_info[pr->r_paramid][RAY_MIB_INFO_SIZ5];
return (0);
}
pr->r_failcause = 0;
ncom = 0;
com[ncom++] = RAY_COM_MALLOC(ray_repparams, RAY_COM_FWOK);
com[ncom-1]->c_pr = pr;
ray_com_runq_arr(sc, com, ncom, "rayrepparams");
error = com[0]->c_retval;
if (!error && pr->r_failcause)
error = EINVAL;
for (i = 0; i < ncom; i++)
FREE(com[i], M_RAYCOM);
return (error);
}
/*
* Runq entry to read the required parameter
*/
static void
ray_repparams(struct ray_softc *sc, struct ray_comq_entry *com)
{
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
RAY_MAP_CM(sc);
(void)ray_ccs_alloc(sc, &com->c_ccs, RAY_CMD_REPORT_PARAMS, 0);
SRAM_WRITE_FIELD_1(sc, com->c_ccs,
ray_cmd_report, c_paramid, com->c_pr->r_paramid);
SRAM_WRITE_FIELD_1(sc, com->c_ccs, ray_cmd_report, c_nparam, 1);
ray_com_ecf(sc, com);
}
/*
* Complete the parameter reporting
*/
static void
ray_repparams_done(struct ray_softc *sc, size_t ccs)
{
struct ray_comq_entry *com;
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
RAY_MAP_CM(sc);
RAY_COM_CHECK(sc, ccs);
com = TAILQ_FIRST(&sc->sc_comq);
com->c_pr->r_failcause =
SRAM_READ_FIELD_1(sc, ccs, ray_cmd_report, c_failcause);
com->c_pr->r_len =
SRAM_READ_FIELD_1(sc, ccs, ray_cmd_report, c_len);
SRAM_READ_REGION(sc, RAY_ECF_TO_HOST_BASE,
com->c_pr->r_data, com->c_pr->r_len);
ray_com_ecf_done(sc);
}
/*
* User land entry (and exit) to the error counters
*/
static int
ray_repstats_user(struct ray_softc *sc, struct ray_stats_req *sr)
{
struct ifnet *ifp = &sc->arpcom.ac_if;
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
if (!(ifp->if_flags & IFF_RUNNING)) {
return (EIO);
}
sr->rxoverflow = sc->sc_rxoverflow;
sr->rxcksum = sc->sc_rxcksum;
sr->rxhcksum = sc->sc_rxhcksum;
sr->rxnoise = sc->sc_rxnoise;
return (0);
}
/*
* User land entry to parameter update changes
*
* As a parameter change can cause the network parameters to be
* invalid we have to re-sttart/join.
*/
static int
ray_upparams_user(struct ray_softc *sc, struct ray_param_req *pr)
{
struct ifnet *ifp = &sc->arpcom.ac_if;
struct ray_comq_entry *com[3];
int i, todo, error, ncom;
#define RAY_UPP_SJ 0x1
#define RAY_UPP_PARAMS 0x2
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
if (!(ifp->if_flags & IFF_RUNNING)) {
pr->r_failcause = RAY_FAILCAUSE_EDEVSTOP;
return (EIO); /* XXX Use this for other IFF_RUNNING checks */
}
/*
* Handle certain parameters specially
*/
todo = 0;
pr->r_failcause = 0;
if (pr->r_paramid > RAY_MIB_LASTUSER)
return (EINVAL);
if ((sc->sc_version == RAY_ECFS_BUILD_4) &&
!(mib_info[pr->r_paramid][0] & RAY_V4))
return (EINVAL);
if ((sc->sc_version == RAY_ECFS_BUILD_5) &&
!(mib_info[pr->r_paramid][0] & RAY_V5))
return (EINVAL);
switch (pr->r_paramid) {
case RAY_MIB_NET_TYPE: /* Updated via START_NET JOIN_NET */
if (sc->sc_c.np_net_type == *pr->r_data)
return (0);
sc->sc_d.np_net_type = *pr->r_data;
todo |= RAY_UPP_SJ;
break;
case RAY_MIB_SSID: /* Updated via START_NET JOIN_NET */
if (bcmp(sc->sc_c.np_ssid, pr->r_data, IEEE80211_NWID_LEN) == 0)
return (0);
bcopy(pr->r_data, sc->sc_d.np_ssid, IEEE80211_NWID_LEN);
todo |= RAY_UPP_SJ;
break;
case RAY_MIB_PRIVACY_MUST_START:/* Updated via START_NET */
if (sc->sc_c.np_net_type != RAY_MIB_NET_TYPE_ADHOC)
return (EINVAL);
if (sc->sc_c.np_priv_start == *pr->r_data)
return (0);
sc->sc_d.np_priv_start = *pr->r_data;
todo |= RAY_UPP_SJ;
break;
case RAY_MIB_PRIVACY_CAN_JOIN: /* Updated via START_NET JOIN_NET */
if (sc->sc_c.np_priv_join == *pr->r_data)
return (0);
sc->sc_d.np_priv_join = *pr->r_data;
todo |= RAY_UPP_SJ;
break;
case RAY_MIB_BASIC_RATE_SET:
sc->sc_d.np_def_txrate = *pr->r_data;
todo |= RAY_UPP_PARAMS;
break;
case RAY_MIB_AP_STATUS: /* Unsupported */
case RAY_MIB_MAC_ADDR: /* XXX Need interface up */
case RAY_MIB_PROMISC: /* BPF */
return (EINVAL);
break;
default:
todo |= RAY_UPP_PARAMS;
todo |= RAY_UPP_SJ;
break;
}
ncom = 0;
if (todo & RAY_UPP_PARAMS) {
com[ncom++] = RAY_COM_MALLOC(ray_upparams, 0);
com[ncom-1]->c_pr = pr;
}
if ((todo & RAY_UPP_SJ) && (ifp->if_flags & IFF_RUNNING)) {
com[ncom++] = RAY_COM_MALLOC(ray_init_sj, 0);
#if XXX_ASSOC
if (sc->sc_d.np_net_type == RAY_MIB_NET_TYPE_INFRA)
com[ncom++] = RAY_COM_MALLOC(ray_init_assoc, 0);
#endif /* XXX_ASSOC */
}
ray_com_runq_arr(sc, com, ncom, "rayupparams");
error = com[0]->c_retval;
if (!error && pr->r_failcause)
error = EINVAL;
/* XXX no error processing from ray_init_sj yet! */
for (i = 0; i < ncom; i++)
FREE(com[i], M_RAYCOM);
return (error);
}
/*
* Runq entry to update a parameter
*/
static void
ray_upparams(struct ray_softc *sc, struct ray_comq_entry *com)
{
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
RAY_MAP_CM(sc);
(void)ray_ccs_alloc(sc, &com->c_ccs, RAY_CMD_UPDATE_PARAMS, 0);
SRAM_WRITE_FIELD_1(sc, com->c_ccs,
ray_cmd_update, c_paramid, com->c_pr->r_paramid);
SRAM_WRITE_FIELD_1(sc, com->c_ccs, ray_cmd_update, c_nparam, 1);
SRAM_WRITE_REGION(sc, RAY_HOST_TO_ECF_BASE,
com->c_pr->r_data, com->c_pr->r_len);
ray_com_ecf(sc, com);
}
/*
* Complete the parameter update
*/
static void
ray_upparams_done(struct ray_softc *sc, size_t ccs)
{
struct ray_comq_entry *com;
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
RAY_MAP_CM(sc);
RAY_COM_CHECK(sc, ccs);
com = TAILQ_FIRST(&sc->sc_comq);
switch (SRAM_READ_FIELD_1(sc, ccs, ray_cmd_update, c_paramid)) {
case RAY_MIB_PROMISC:
sc->sc_promisc = SRAM_READ_1(sc, RAY_HOST_TO_ECF_BASE);
RAY_DPRINTF(sc, RAY_DBG_IOCTL,
"promisc value %d", sc->sc_promisc);
break;
default:
com->c_pr->r_failcause =
SRAM_READ_FIELD_1(sc, ccs, ray_cmd_update, c_failcause);
break;
}
ray_com_ecf_done(sc);
}
/*
* Command queuing and execution
*/
/*
* Malloc, set up a comq entry struct
*/
#if RAY_DEBUG & RAY_DBG_COM
static struct ray_comq_entry *
ray_com_malloc(ray_comqfn_t function, int flags, char *mesg)
#else
static struct ray_comq_entry *
ray_com_malloc(ray_comqfn_t function, int flags)
#endif /* RAY_DEBUG & RAY_DBG_COM */
{
struct ray_comq_entry *com;
MALLOC(com, struct ray_comq_entry *,
sizeof(struct ray_comq_entry), M_RAYCOM, M_WAITOK);
com->c_function = function;
com->c_flags = flags;
com->c_retval = 0;
com->c_ccs = NULL;
com->c_wakeup = NULL;
com->c_pr = NULL;
#if RAY_DEBUG & RAY_DBG_COM
com->c_mesg = mesg;
#endif /* RAY_DEBUG & RAY_DBG_COM */
return (com);
}
/*
* Add an array of commands to the runq and then run them, waiting on
* the last command
*/
static void
ray_com_runq_arr(struct ray_softc *sc, struct ray_comq_entry *com[], int ncom, char *wmesg)
{
int i;
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
for (i = 0; i < ncom; i++) {
com[i]->c_wakeup = com[ncom-1];
ray_com_runq_add(sc, com[i]);
}
com[ncom-1]->c_flags = RAY_COM_FWOK;
ray_com_runq(sc);
RAY_DPRINTF(sc, RAY_DBG_COM, "sleeping");
(void)tsleep(com[ncom-1], 0, wmesg, 0);
RAY_DPRINTF(sc, RAY_DBG_COM, "awakened");
}
/*
* Add a command to the tail of the queue
*/
static void
ray_com_runq_add(struct ray_softc *sc, struct ray_comq_entry *com)
{
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_COM, "");
RAY_COM_DUMP(sc, com, "adding");
TAILQ_INSERT_TAIL(&sc->sc_comq, com, c_chain);
}
/*
* Run the command at the head of the queue (if not already running)
*/
static void
ray_com_runq(struct ray_softc *sc)
{
struct ray_comq_entry *com;
struct ifnet *ifp = &sc->arpcom.ac_if;
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_COM, "");
com = TAILQ_FIRST(&sc->sc_comq);
#if RAY_DEBUG & RAY_DBG_COM /* XXX this can go later */
if (com == NULL) {
RAY_DPRINTF(sc, RAY_DBG_COM, "empty command queue");
return;
}
if (com->c_flags & RAY_COM_FRUNNING) {
RAY_DPRINTF(sc, RAY_DBG_COM, "command already running");
return;
}
#else
if ((com == NULL) || (com->c_flags & RAY_COM_FRUNNING))
return;
#endif /* RAY_DEBUG & RAY_DBG_COM */
/*
* XXX how can IFF_RUNNING be cleared
* XXX before this routine exits - check in ray_ioctl and the
* XXX network code itself. ray_stop should have prevented this
* XXX command from running?
*
* XXX also what about sc->sc_gone and sc->sc_havenet?
*/
if (!(ifp->if_flags & IFF_RUNNING))
RAY_PANIC(sc, "not running");
com->c_flags |= RAY_COM_FRUNNING;
RAY_COM_DUMP(sc, com, "running");
com->c_function(sc, com);
}
/*
* Abort the execution of a run queue entry and wakeup the
* user level caller.
*
* We do not remove the entry from the runq incase the caller want's to
* retry and to prevent any other commands being run. The user level caller
* must acknowledge the abort.
*/
static void
ray_com_runq_abort(struct ray_softc *sc, struct ray_comq_entry *com, int reason)
{
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_COM, "");
#if RAY_DEBUG & RAY_DBG_COM
if (com != TAILQ_FIRST(&sc->sc_comq))
RAY_PANIC(sc, "com and head of queue");
#endif /* RAY_DEBUG & RAY_DBG_COM */
RAY_COM_DUMP(sc, com, "aborting");
com->c_retval = reason;
wakeup(com->c_wakeup);
}
/*
* Remove an aborted command and re-run the queue
*/
static void
ray_com_runq_clrabort(struct ray_softc *sc, struct ray_comq_entry *com)
{
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_COM, "");
#if RAY_DEBUG & RAY_DBG_COM
if (com != TAILQ_FIRST(&sc->sc_comq))
RAY_PANIC(sc, "com and head of queue");
#endif /* RAY_DEBUG & RAY_DBG_COM */
RAY_COM_DUMP(sc, com, "removing");
TAILQ_REMOVE(&sc->sc_comq, com, c_chain);
ray_com_runq(sc);
}
/*
* Remove run command and wakeup caller.
*
* Minimal checks are done here as we ensure that the com and
* command handler were matched up earlier.
*
* Remove the com from the comq, and wakeup the caller if it requested
* to be woken. This is used for ensuring a sequence of commands
* completes.
*/
static void
ray_com_runq_done(struct ray_softc *sc)
{
struct ray_comq_entry *com;
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_COM, "");
com = TAILQ_FIRST(&sc->sc_comq); /* XXX shall we do this as below */
com->c_flags &= ~RAY_COM_FRUNNING;
com->c_flags |= RAY_COM_FCOMPLETED;
com->c_retval = 0;
RAY_COM_DUMP(sc, com, "removing");
TAILQ_REMOVE(&sc->sc_comq, com, c_chain);
if (com->c_flags & RAY_COM_FWOK)
wakeup(com->c_wakeup);
/* XXX what about error on completion then? deal with when i fix
* XXX the status checking */
}
/*
* Send a command to the ECF.
*/
static void
ray_com_ecf(struct ray_softc *sc, struct ray_comq_entry *com)
{
u_int i;
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_COM, "");
RAY_MAP_CM(sc);
#if RAY_DEBUG & RAY_DBG_COM
if (com != TAILQ_FIRST(&sc->sc_comq))
RAY_PANIC(sc, "com and head of queue");
#endif /* RAY_DEBUG & RAY_DBG_COM */
/*
* XXX other drivers did this, but I think
* XXX what we really want to do is just make sure we don't
* XXX get here or that spinning is ok
*
* XXX actually we probably want to call a timeout on
* XXX ourself here...
*/
i = 0;
while (!RAY_ECF_READY(sc))
if (++i > 50)
RAY_PANIC(sc, "spun too long");
else if (i == 1)
RAY_PRINTF(sc, "spinning");
RAY_COM_DUMP(sc, com, "sending");
SRAM_WRITE_1(sc, RAY_SCB_CCSI, RAY_CCS_INDEX(com->c_ccs));
RAY_ECF_START_CMD(sc);
if (RAY_COM_NEEDS_TIMO(
SRAM_READ_FIELD_1(sc, com->c_ccs, ray_cmd, c_cmd))) {
RAY_DPRINTF(sc, RAY_DBG_COM, "adding timeout");
sc->com_timerh = timeout(ray_com_ecf_timo, sc, RAY_COM_TIMEOUT);
}
}
/*
* Deal with commands that require a timeout to test completion.
*
* This routine is coded to only expect one outstanding request for the
* timed out requests at a time, but thats all that can be outstanding
* per hardware limitations and all that we issue anyway.
*
* We don't do any fancy testing of the command currently issued as we
* know it must be a timeout based one...unless I've got this wrong!
*/
static void
ray_com_ecf_timo(void *xsc)
{
struct ray_softc *sc = (struct ray_softc *)xsc;
struct ray_comq_entry *com;
u_int8_t cmd;
int s;
s = splnet();
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_COM, "");
RAY_MAP_CM(sc);
com = TAILQ_FIRST(&sc->sc_comq);
#if RAY_DEBUG & RAY_DBG_COM /* XXX get rid of this at some point or make it KASSERT */
if (com == NULL)
RAY_PANIC(sc, "no command queue");
#endif /* RAY_DEBUG & RAY_DBG_COM */
cmd = SRAM_READ_FIELD_1(sc, com->c_ccs, ray_cmd, c_cmd);
switch (SRAM_READ_FIELD_1(sc, com->c_ccs, ray_cmd, c_status)) {
case RAY_CCS_STATUS_COMPLETE:
case RAY_CCS_STATUS_FREE: /* Buggy firmware */
ray_intr_ccs(sc, cmd, com->c_ccs);
break;
case RAY_CCS_STATUS_BUSY:
sc->com_timerh = timeout(ray_com_ecf_timo, sc, RAY_COM_TIMEOUT);
break;
default: /* Replicates NetBSD */
if (sc->sc_ccsinuse[RAY_CCS_INDEX(com->c_ccs)] == 1) {
/* give a chance for the interrupt to occur */
sc->sc_ccsinuse[RAY_CCS_INDEX(com->c_ccs)] = 2;
sc->com_timerh = timeout(ray_com_ecf_timo, sc,
RAY_COM_TIMEOUT);
} else
ray_intr_ccs(sc, cmd, com->c_ccs);
break;
}
splx(s);
}
/*
* Called when interrupt handler for the command has done all it
* needs to.
*/
static void
ray_com_ecf_done(struct ray_softc *sc)
{
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_COM, "");
untimeout(ray_com_ecf_timo, sc, sc->com_timerh);
ray_com_runq_done(sc);
}
#if RAY_DEBUG & RAY_DBG_COM
/*
* Process completed ECF commands that probably came from the command queue
*
* This routine is called after vectoring the completed ECF command
* to the appropriate _done routine. It helps check everything is okay.
*/
static void
ray_com_ecf_check(struct ray_softc *sc, size_t ccs, char *mesg)
{
struct ray_comq_entry *com;
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_COM, "%s", mesg);
RAY_MAP_CM(sc);
com = TAILQ_FIRST(&sc->sc_comq);
if (com == NULL)
RAY_PANIC(sc, "no command queue");
if (com->c_ccs != ccs)
RAY_PANIC(sc, "ccs's don't match");
}
#endif /* RAY_DEBUG & RAY_DBG_COM */
/*
* CCS allocator for commands
*/
/*
* Obtain a ccs and fill easy bits in
*
* Returns 1 and in `ccsp' the bus offset of the free ccs. Will block
* awaiting free ccs if needed, timo is passed to tsleep and will
* return 0 if the timeout expired.
*/
static int
ray_ccs_alloc(struct ray_softc *sc, size_t *ccsp, u_int cmd, int timo)
{
size_t ccs;
u_int i;
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_CCS, "");
RAY_MAP_CM(sc);
for (;;) {
for (i = RAY_CCS_CMD_FIRST; i <= RAY_CCS_CMD_LAST; i++) {
/* we probe here to make the card go */
(void)SRAM_READ_FIELD_1(sc, RAY_CCS_ADDRESS(i), ray_cmd,
c_status);
if (!sc->sc_ccsinuse[i])
break;
}
if (i > RAY_CCS_CMD_LAST) {
RAY_PANIC(sc, "out of CCS's");
} else
break;
}
sc->sc_ccsinuse[i] = 1;
ccs = RAY_CCS_ADDRESS(i);
RAY_DPRINTF(sc, RAY_DBG_CCS, "allocated 0x%02x", i);
SRAM_WRITE_FIELD_1(sc, ccs, ray_cmd, c_status, RAY_CCS_STATUS_BUSY);
SRAM_WRITE_FIELD_1(sc, ccs, ray_cmd, c_cmd, cmd);
SRAM_WRITE_FIELD_1(sc, ccs, ray_cmd, c_link, RAY_CCS_LINK_NULL);
*ccsp = ccs;
return (1);
}
/*
* Free up a ccs allocated via ray_ccs_alloc
*
* Return the old status. This routine is only used for ccs allocated via
* ray_ccs_alloc (not tx, rx or ECF command requests).
*/
static u_int8_t
ray_ccs_free(struct ray_softc *sc, size_t ccs)
{
u_int8_t status;
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_CCS, "");
RAY_MAP_CM(sc);
status = SRAM_READ_FIELD_1(sc, ccs, ray_cmd, c_status);
RAY_CCS_FREE(sc, ccs);
sc->sc_ccsinuse[RAY_CCS_INDEX(ccs)] = 0;
wakeup(ray_ccs_alloc);
RAY_DPRINTF(sc, RAY_DBG_CCS, "freed 0x%02x", RAY_CCS_INDEX(ccs));
return (status);
}
/*
* Routines to obtain resources for the card
*/
/*
* Allocate the attribute memory on the card
*/
static int
ray_res_alloc_am(struct ray_softc *sc)
{
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_CM, "");
sc->am_rid = 1; /* pccard uses 0 */
sc->am_res = bus_alloc_resource(sc->dev, SYS_RES_MEMORY, &sc->am_rid,
0, ~0, 0x1000, RF_ACTIVE);
if (!sc->am_res) {
RAY_PRINTF(sc, "Cannot allocate attribute memory");
return (ENOMEM);
}
/* XXX ensure attribute memory settings */
sc->am_bsh = rman_get_bushandle(sc->am_res);
sc->am_bst = rman_get_bustag(sc->am_res);
#if RAY_DEBUG & (RAY_DBG_CM | RAY_DBG_BOOTPARAM)
{
u_long flags = 0xffff;
CARD_GET_RES_FLAGS(device_get_parent(sc->dev), sc->dev,
SYS_RES_MEMORY, sc->am_rid, &flags); /* XXX card_get_res_flags */
RAY_PRINTF(sc, "allocated attribute memory:\n"
" start 0x%0lx count 0x%0lx flags 0x%0lx",
bus_get_resource_start(sc->dev, SYS_RES_MEMORY, sc->am_rid),
bus_get_resource_count(sc->dev, SYS_RES_MEMORY, sc->am_rid),
flags);
}
#endif /* RAY_DEBUG & (RAY_DBG_CM | RAY_DBG_BOOTPARAM) */
return (0);
}
/*
* Allocate the common memory on the card
*
* XXX the pccard manager should get this right eventually and allocate it
* XXX for us - that why I'm using rid == 0
* XXX I might end up just setting these using set_start etc.
*/
static int
ray_res_alloc_cm(struct ray_softc *sc)
{
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
sc->cm_rid = 0; /* pccard uses 0 */
sc->cm_res = bus_alloc_resource(sc->dev, SYS_RES_MEMORY, &sc->cm_rid,
0, ~0, 0xc000, RF_ACTIVE);
if (!sc->cm_res) {
RAY_PRINTF(sc, "Cannot allocate common memory");
return (ENOMEM);
}
/* XXX ensure 8bit access */
sc->cm_bsh = rman_get_bushandle(sc->cm_res);
sc->cm_bst = rman_get_bustag(sc->cm_res);
#if RAY_DEBUG & (RAY_DBG_CM | RAY_DBG_BOOTPARAM)
{
u_long flags = 0xffff;
CARD_GET_RES_FLAGS(device_get_parent(sc->dev), sc->dev,
SYS_RES_MEMORY, sc->cm_rid, &flags); /* XXX card_get_res_flags */
RAY_PRINTF(sc, "allocated common memory:\n"
" start 0x%0lx count 0x%0lx flags 0x%0lx",
bus_get_resource_start(sc->dev, SYS_RES_MEMORY, sc->cm_rid),
bus_get_resource_count(sc->dev, SYS_RES_MEMORY, sc->cm_rid),
flags);
}
#endif /* RAY_DEBUG & (RAY_DBG_CM | RAY_DBG_BOOTPARAM) */
return (0);
}
/*
* Get an irq and attach it to the bus
*/
static int
ray_res_alloc_irq(struct ray_softc *sc)
{
int error;
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
sc->irq_rid = 0;
sc->irq_res = bus_alloc_resource(sc->dev, SYS_RES_IRQ, &sc->irq_rid,
0, ~0, 1, RF_ACTIVE);
if (!sc->irq_res) {
RAY_PRINTF(sc, "Cannot allocate irq");
return (ENOMEM);
}
if ((error = bus_setup_intr(sc->dev, sc->irq_res, INTR_TYPE_NET,
ray_intr, sc, &sc->irq_handle)) != 0) {
RAY_PRINTF(sc, "Failed to setup irq");
return (error);
}
RAY_DPRINTF(sc, RAY_DBG_CM | RAY_DBG_BOOTPARAM, "allocated irq:\n"
" start 0x%0lx count 0x%0lx",
bus_get_resource_start(sc->dev, SYS_RES_IRQ, sc->irq_rid),
bus_get_resource_count(sc->dev, SYS_RES_IRQ, sc->irq_rid));
return (0);
}
/*
* Release all of the card's resources
*/
static void
ray_res_release(struct ray_softc *sc)
{
if (sc->irq_res != 0) {
bus_teardown_intr(sc->dev, sc->irq_res, sc->irq_handle);
bus_release_resource(sc->dev, SYS_RES_IRQ,
sc->irq_rid, sc->irq_res);
sc->irq_res = 0;
}
if (sc->am_res != 0) {
bus_release_resource(sc->dev, SYS_RES_MEMORY,
sc->am_rid, sc->am_res);
sc->am_res = 0;
}
if (sc->cm_res != 0) {
bus_release_resource(sc->dev, SYS_RES_MEMORY,
sc->cm_rid, sc->cm_res);
sc->cm_res = 0;
}
}
/*
* Hacks for working around the PCCard layer problems.
*
* For NEWBUS kludge and OLDCARD.
*
* We just call the pccard layer to change and restore the mapping each
* time we use the attribute memory.
*
*/
#if RAY_NEED_CM_REMAPPING
static void
ray_attr_mapam(struct ray_softc *sc)
{
CARD_SET_RES_FLAGS(device_get_parent(sc->dev), sc->dev, SYS_RES_MEMORY,
sc->am_rid, PCCARD_A_MEM_ATTR); /* XXX card_set_res_flags */
#if RAY_DEBUG & RAY_DBG_CM
{
u_long flags = 0xffff;
CARD_GET_RES_FLAGS(device_get_parent(sc->dev), sc->dev,
SYS_RES_MEMORY, sc->am_rid, &flags); /* XXX card_get_res_flags */
RAY_PRINTF(sc, "attribute memory\n"
" start 0x%0lx count 0x%0lx flags 0x%0lx",
bus_get_resource_start(sc->dev, SYS_RES_MEMORY, sc->am_rid),
bus_get_resource_count(sc->dev, SYS_RES_MEMORY, sc->am_rid),
flags);
}
#endif /* RAY_DEBUG & RAY_DBG_CM */
}
static void
ray_attr_mapcm(struct ray_softc *sc)
{
CARD_SET_RES_FLAGS(device_get_parent(sc->dev), sc->dev, SYS_RES_MEMORY,
sc->cm_rid, 0); /* XXX card_set_res_flags */
#if RAY_DEBUG & RAY_DBG_CM
{
u_long flags = 0xffff;
CARD_GET_RES_FLAGS(device_get_parent(sc->dev), sc->dev,
SYS_RES_MEMORY, sc->cm_rid, &flags); /* XXX card_get_res_flags */
RAY_PRINTF(sc, "common memory\n"
" start 0x%0lx count 0x%0lx flags 0x%0lx",
bus_get_resource_start(sc->dev, SYS_RES_MEMORY, sc->cm_rid),
bus_get_resource_count(sc->dev, SYS_RES_MEMORY, sc->cm_rid),
flags);
}
#endif /* RAY_DEBUG & RAY_DBG_CM */
}
static u_int8_t
ray_attr_read_1(struct ray_softc *sc, off_t offset)
{
u_int8_t byte;
ray_attr_mapam(sc);
byte = (u_int8_t)bus_space_read_1(sc->am_bst, sc->am_bsh, offset);
ray_attr_mapcm(sc);
return (byte);
}
static void
ray_attr_write_1(struct ray_softc *sc, off_t offset, u_int8_t byte)
{
ray_attr_mapam(sc);
bus_space_write_1(sc->am_bst, sc->am_bsh, offset, byte);
ray_attr_mapcm(sc);
}
#endif /* RAY_NEED_CM_REMAPPING */
/*
* mbuf dump
*/
#if RAY_DEBUG & RAY_DBG_MBUF
static void
ray_dump_mbuf(struct ray_softc *sc, struct mbuf *m, char *s)
{
u_int8_t *d, *ed;
u_int i;
char p[17];
RAY_PRINTF(sc, "%s mbuf dump:", s);
i = 0;
bzero(p, 17);
for (; m; m = m->m_next) {
d = mtod(m, u_int8_t *);
ed = d + m->m_len;
for (; d < ed; i++, d++) {
if ((i % 16) == 0) {
printf(" %s\n\t", p);
} else if ((i % 8) == 0)
printf(" ");
printf(" %02x", *d);
p[i % 16] = ((*d >= 0x20) && (*d < 0x80)) ? *d : '.';
}
}
if ((i - 1) % 16)
printf("%s\n", p);
}
#endif /* RAY_DEBUG & RAY_DBG_MBUF */
#endif /* NRAY */
Reference in New Issue View Git Blame Copy Permalink