freebsd-skq/sys/netinet/sctp_structs.h
rrs 9afebb96fc - Found bug in min split point bundling which caused
incorrect, non-bundlable fragmentation.
- Added min residual to better control split points for
  both how big a msg must be as well as how much needs
  to be left over.
- With our new algo in place, we need to implicitly
  set "end of msg" on the sp-> structure otherwise we
  end up with "hung" associations.
- Room reserved up front in IP header by pushing IP
  header to back of mbuf.
- Fix so FR's peg count of retransmissions needed.
- Fix so an unlucky chunk that never gets across
  will kill the assoc via the kill timer and send an
  abort too.
- Fix bug in sctp_input which can result in a crash.
- Do not strip off IP options anymore.
- Clean up sctp_calculate_rto().
- Get rid of unused sysctl.
- Fixed so we discard all M-Cast
- Fixed so port check done AFTER checksum
- Fixed bug in fragmentation code that prevented
  us from fragmenting a small complete message when
  we needed to.
- Window probes were not marked back to unsent and
  flight adjusted when a sack came in with no
  window change or accepting of the probe data.
  We now fix this with having a mark on the net and
  the chunk so we can clear it out when the sack arrives
  forcing it to retran just like it was "new" this
  improves the handling of window probes, which were
  dropped by the receiver.
- Tighten AUTH protocol error checks during INIT/INIT-ACK exchange
2007-03-31 11:47:30 +00:00

933 lines
28 KiB
C

/*-
* Copyright (c) 2001-2007, Cisco Systems, Inc. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* a) Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* b) Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the distribution.
*
* c) Neither the name of Cisco Systems, Inc. nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*/
/* $KAME: sctp_structs.h,v 1.13 2005/03/06 16:04:18 itojun Exp $ */
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#ifndef __sctp_structs_h__
#define __sctp_structs_h__
#include <netinet/sctp_os.h>
#include <netinet/sctp_header.h>
#include <netinet/sctp_uio.h>
#include <netinet/sctp_auth.h>
struct sctp_timer {
sctp_os_timer_t timer;
int type;
/*
* Depending on the timer type these will be setup and cast with the
* appropriate entity.
*/
void *ep;
void *tcb;
void *net;
/* for sanity checking */
void *self;
uint32_t ticks;
uint32_t stopped_from;
};
struct sctp_nonpad_sndrcvinfo {
uint16_t sinfo_stream;
uint16_t sinfo_ssn;
uint16_t sinfo_flags;
uint32_t sinfo_ppid;
uint32_t sinfo_context;
uint32_t sinfo_timetolive;
uint32_t sinfo_tsn;
uint32_t sinfo_cumtsn;
sctp_assoc_t sinfo_assoc_id;
};
struct sctp_foo_stuff {
struct sctp_inpcb *inp;
uint32_t lineno;
uint32_t ticks;
int updown;
};
/*
* This is the information we track on each interface that we know about from
* the distant end.
*/
TAILQ_HEAD(sctpnetlisthead, sctp_nets);
struct sctp_stream_reset_list {
TAILQ_ENTRY(sctp_stream_reset_list) next_resp;
uint32_t tsn;
int number_entries;
struct sctp_stream_reset_out_request req;
};
TAILQ_HEAD(sctp_resethead, sctp_stream_reset_list);
/*
* Users of the iterator need to malloc a iterator with a call to
* sctp_initiate_iterator(inp_func, assoc_func, inp_func, pcb_flags, pcb_features,
* asoc_state, void-ptr-arg, uint32-arg, end_func, inp);
*
* Use the following two defines if you don't care what pcb flags are on the EP
* and/or you don't care what state the association is in.
*
* Note that if you specify an INP as the last argument then ONLY each
* association of that single INP will be executed upon. Note that the pcb
* flags STILL apply so if the inp you specify has different pcb_flags then
* what you put in pcb_flags nothing will happen. use SCTP_PCB_ANY_FLAGS to
* assure the inp you specify gets treated.
*/
#define SCTP_PCB_ANY_FLAGS 0x00000000
#define SCTP_PCB_ANY_FEATURES 0x00000000
#define SCTP_ASOC_ANY_STATE 0x00000000
typedef void (*asoc_func) (struct sctp_inpcb *, struct sctp_tcb *, void *ptr,
uint32_t val);
typedef int (*inp_func) (struct sctp_inpcb *, void *ptr, uint32_t val);
typedef void (*end_func) (void *ptr, uint32_t val);
struct sctp_iterator {
TAILQ_ENTRY(sctp_iterator) sctp_nxt_itr;
struct sctp_timer tmr;
struct sctp_inpcb *inp; /* current endpoint */
struct sctp_tcb *stcb; /* current* assoc */
asoc_func function_assoc; /* per assoc function */
inp_func function_inp; /* per endpoint function */
inp_func function_inp_end; /* end INP function */
end_func function_atend;/* iterator completion function */
void *pointer; /* pointer for apply func to use */
uint32_t val; /* value for apply func to use */
uint32_t pcb_flags; /* endpoint flags being checked */
uint32_t pcb_features; /* endpoint features being checked */
uint32_t asoc_state; /* assoc state being checked */
uint32_t iterator_flags;
uint8_t no_chunk_output;
uint8_t done_current_ep;
};
/* iterator_flags values */
#define SCTP_ITERATOR_DO_ALL_INP 0x00000001
#define SCTP_ITERATOR_DO_SINGLE_INP 0x00000002
TAILQ_HEAD(sctpiterators, sctp_iterator);
struct sctp_copy_all {
struct sctp_inpcb *inp; /* ep */
struct mbuf *m;
struct sctp_sndrcvinfo sndrcv;
int sndlen;
int cnt_sent;
int cnt_failed;
};
struct sctp_asconf_iterator {
struct sctpladdr list_of_work;
int cnt;
};
struct sctp_nets {
TAILQ_ENTRY(sctp_nets) sctp_next; /* next link */
/*
* Things on the top half may be able to be split into a common
* structure shared by all.
*/
struct sctp_timer pmtu_timer;
/*
* The following two in combination equate to a route entry for v6
* or v4.
*/
struct sctp_route {
struct rtentry *ro_rt;
union sctp_sockstore _l_addr; /* remote peer addr */
struct sctp_ifa *_s_addr; /* our selected src addr */
} ro;
/* mtu discovered so far */
uint32_t mtu;
uint32_t ssthresh; /* not sure about this one for split */
/* smoothed average things for RTT and RTO itself */
int lastsa;
int lastsv;
unsigned int RTO;
/* This is used for SHUTDOWN/SHUTDOWN-ACK/SEND or INIT timers */
struct sctp_timer rxt_timer;
struct sctp_timer fr_timer; /* for early fr */
/* last time in seconds I sent to it */
struct timeval last_sent_time;
int ref_count;
/* Congestion stats per destination */
/*
* flight size variables and such, sorry Vern, I could not avoid
* this if I wanted performance :>
*/
uint32_t flight_size;
uint32_t cwnd; /* actual cwnd */
uint32_t prev_cwnd; /* cwnd before any processing */
uint32_t partial_bytes_acked; /* in CA tracks when to incr a MTU */
uint32_t prev_rtt;
/* tracking variables to avoid the aloc/free in sack processing */
unsigned int net_ack;
unsigned int net_ack2;
/*
* CMT variables (iyengar@cis.udel.edu)
*/
uint32_t this_sack_highest_newack; /* tracks highest TSN newly
* acked for a given dest in
* the current SACK. Used in
* SFR and HTNA algos */
uint32_t pseudo_cumack; /* CMT CUC algorithm. Maintains next expected
* pseudo-cumack for this destination */
uint32_t rtx_pseudo_cumack; /* CMT CUC algorithm. Maintains next
* expected pseudo-cumack for this
* destination */
/* CMT fast recovery variables */
uint32_t fast_recovery_tsn;
uint32_t heartbeat_random1;
uint32_t heartbeat_random2;
uint32_t tos_flowlabel;
struct timeval start_time; /* time when this net was created */
uint32_t marked_retrans;/* number or DATA chunks marked for timer
* based retransmissions */
uint32_t marked_fastretrans;
/* if this guy is ok or not ... status */
uint16_t dest_state;
/* number of transmit failures to down this guy */
uint16_t failure_threshold;
/* error stats on destination */
uint16_t error_count;
uint8_t fast_retran_loss_recovery;
uint8_t will_exit_fast_recovery;
/* Flags that probably can be combined into dest_state */
uint8_t fast_retran_ip; /* fast retransmit in progress */
uint8_t hb_responded;
uint8_t saw_newack; /* CMT's SFR algorithm flag */
uint8_t src_addr_selected; /* if we split we move */
uint8_t indx_of_eligible_next_to_use;
uint8_t addr_is_local; /* its a local address (if known) could move
* in split */
/*
* CMT variables (iyengar@cis.udel.edu)
*/
uint8_t find_pseudo_cumack; /* CMT CUC algorithm. Flag used to
* find a new pseudocumack. This flag
* is set after a new pseudo-cumack
* has been received and indicates
* that the sender should find the
* next pseudo-cumack expected for
* this destination */
uint8_t find_rtx_pseudo_cumack; /* CMT CUCv2 algorithm. Flag used to
* find a new rtx-pseudocumack. This
* flag is set after a new
* rtx-pseudo-cumack has been received
* and indicates that the sender
* should find the next
* rtx-pseudo-cumack expected for this
* destination */
uint8_t new_pseudo_cumack; /* CMT CUC algorithm. Flag used to
* indicate if a new pseudo-cumack or
* rtx-pseudo-cumack has been received */
uint8_t window_probe; /* Doing a window probe? */
#ifdef SCTP_HIGH_SPEED
uint8_t last_hs_used; /* index into the last HS table entry we used */
#endif
};
struct sctp_data_chunkrec {
uint32_t TSN_seq; /* the TSN of this transmit */
uint16_t stream_seq; /* the stream sequence number of this transmit */
uint16_t stream_number; /* the stream number of this guy */
uint32_t payloadtype;
uint32_t context; /* from send */
/* ECN Nonce: Nonce Value for this chunk */
uint8_t ect_nonce;
/*
* part of the Highest sacked algorithm to be able to stroke counts
* on ones that are FR'd.
*/
uint32_t fast_retran_tsn; /* sending_seq at the time of FR */
struct timeval timetodrop; /* time we drop it from queue */
uint8_t doing_fast_retransmit;
uint8_t rcv_flags; /* flags pulled from data chunk on inbound for
* outbound holds sending flags for PR-SCTP. */
uint8_t state_flags;
uint8_t chunk_was_revoked;
};
TAILQ_HEAD(sctpchunk_listhead, sctp_tmit_chunk);
/* The lower byte is used to enumerate PR_SCTP policies */
#define CHUNK_FLAGS_PR_SCTP_TTL SCTP_PR_SCTP_TTL
#define CHUNK_FLAGS_PR_SCTP_BUF SCTP_PR_SCTP_BUF
#define CHUNK_FLAGS_PR_SCTP_RTX SCTP_PR_SCTP_RTX
/* The upper byte is used a a bit mask */
#define CHUNK_FLAGS_FRAGMENT_OK 0x0100
struct chk_id {
uint16_t id;
uint16_t can_take_data;
};
struct sctp_tmit_chunk {
union {
struct sctp_data_chunkrec data;
struct chk_id chunk_id;
} rec;
struct sctp_association *asoc; /* bp to asoc this belongs to */
struct timeval sent_rcv_time; /* filled in if RTT being calculated */
struct mbuf *data; /* pointer to mbuf chain of data */
struct mbuf *last_mbuf; /* pointer to last mbuf in chain */
struct sctp_nets *whoTo;
TAILQ_ENTRY(sctp_tmit_chunk) sctp_next; /* next link */
int32_t sent; /* the send status */
uint16_t snd_count; /* number of times I sent */
uint16_t flags; /* flags, such as FRAGMENT_OK */
uint16_t send_size;
uint16_t book_size;
uint16_t mbcnt;
uint8_t pad_inplace;
uint8_t do_rtt;
uint8_t book_size_scale;
uint8_t addr_over; /* flag which is set if the dest address for
* this chunk is overridden by user. Used for
* CMT (iyengar@cis.udel.edu, 2005/06/21) */
uint8_t no_fr_allowed;
uint8_t pr_sctp_on;
uint8_t copy_by_ref;
uint8_t window_probe;
};
/*
* The first part of this structure MUST be the entire sinfo structure. Maybe
* I should have made it a sub structure... we can circle back later and do
* that if we want.
*/
struct sctp_queued_to_read { /* sinfo structure Pluse more */
uint16_t sinfo_stream; /* off the wire */
uint16_t sinfo_ssn; /* off the wire */
uint16_t sinfo_flags; /* SCTP_UNORDERED from wire use SCTP_EOF for
* EOR */
uint32_t sinfo_ppid; /* off the wire */
uint32_t sinfo_context; /* pick this up from assoc def context? */
uint32_t sinfo_timetolive; /* not used by kernel */
uint32_t sinfo_tsn; /* Use this in reassembly as first TSN */
uint32_t sinfo_cumtsn; /* Use this in reassembly as last TSN */
sctp_assoc_t sinfo_assoc_id; /* our assoc id */
/* Non sinfo stuff */
uint32_t length; /* length of data */
uint32_t held_length; /* length held in sb */
struct sctp_nets *whoFrom; /* where it came from */
struct mbuf *data; /* front of the mbuf chain of data with
* PKT_HDR */
struct mbuf *tail_mbuf; /* used for multi-part data */
struct sctp_tcb *stcb; /* assoc, used for window update */
TAILQ_ENTRY(sctp_queued_to_read) next;
uint16_t port_from;
uint16_t spec_flags; /* Flags to hold the notification field */
uint8_t do_not_ref_stcb;
uint8_t end_added;
uint8_t pdapi_aborted;
uint8_t resv;
};
/* This data structure will be on the outbound
* stream queues. Data will be pulled off from
* the front of the mbuf data and chunk-ified
* by the output routines. We will custom
* fit every chunk we pull to the send/sent
* queue to make up the next full packet
* if we can. An entry cannot be removed
* from the stream_out queue until
* the msg_is_complete flag is set. This
* means at times data/tail_mbuf MIGHT
* be NULL.. If that occurs it happens
* for one of two reasons. Either the user
* is blocked on a send() call and has not
* awoken to copy more data down... OR
* the user is in the explict MSG_EOR mode
* and wrote some data, but has not completed
* sending.
*/
struct sctp_stream_queue_pending {
struct mbuf *data;
struct mbuf *tail_mbuf;
struct timeval ts;
struct sctp_nets *net;
TAILQ_ENTRY(sctp_stream_queue_pending) next;
uint32_t length;
uint32_t timetolive;
uint32_t ppid;
uint32_t context;
uint16_t sinfo_flags;
uint16_t stream;
uint16_t strseq;
uint16_t act_flags;
uint8_t msg_is_complete;
uint8_t some_taken;
uint8_t addr_over;
uint8_t pr_sctp_on;
};
/*
* this struct contains info that is used to track inbound stream data and
* help with ordering.
*/
TAILQ_HEAD(sctpwheelunrel_listhead, sctp_stream_in);
struct sctp_stream_in {
struct sctp_readhead inqueue;
TAILQ_ENTRY(sctp_stream_in) next_spoke;
uint16_t stream_no;
uint16_t last_sequence_delivered; /* used for re-order */
};
/* This struct is used to track the traffic on outbound streams */
TAILQ_HEAD(sctpwheel_listhead, sctp_stream_out);
struct sctp_stream_out {
struct sctp_streamhead outqueue;
TAILQ_ENTRY(sctp_stream_out) next_spoke; /* next link in wheel */
uint16_t stream_no;
uint16_t next_sequence_sent; /* next one I expect to send out */
uint8_t last_msg_incomplete;
};
/* used to keep track of the addresses yet to try to add/delete */
TAILQ_HEAD(sctp_asconf_addrhead, sctp_asconf_addr);
struct sctp_asconf_addr {
TAILQ_ENTRY(sctp_asconf_addr) next;
struct sctp_asconf_addr_param ap;
struct sctp_ifa *ifa; /* save the ifa for add/del ip */
uint8_t sent; /* has this been sent yet? */
};
struct sctp_scoping {
uint8_t ipv4_addr_legal;
uint8_t ipv6_addr_legal;
uint8_t loopback_scope;
uint8_t ipv4_local_scope;
uint8_t local_scope;
uint8_t site_scope;
};
#define SCTP_TSN_LOG_SIZE 40
struct sctp_tsn_log {
uint32_t tsn;
uint16_t strm;
uint16_t seq;
};
/*
* Here we have information about each individual association that we track.
* We probably in production would be more dynamic. But for ease of
* implementation we will have a fixed array that we hunt for in a linear
* fashion.
*/
struct sctp_association {
/* association state */
int state;
/* queue of pending addrs to add/delete */
struct sctp_asconf_addrhead asconf_queue;
struct timeval time_entered; /* time we entered state */
struct timeval time_last_rcvd;
struct timeval time_last_sent;
struct timeval time_last_sat_advance;
struct sctp_sndrcvinfo def_send; /* default send parameters */
/* timers and such */
struct sctp_timer hb_timer; /* hb timer */
struct sctp_timer dack_timer; /* Delayed ack timer */
struct sctp_timer asconf_timer; /* Asconf */
struct sctp_timer strreset_timer; /* stream reset */
struct sctp_timer shut_guard_timer; /* guard */
struct sctp_timer autoclose_timer; /* automatic close timer */
struct sctp_timer delayed_event_timer; /* timer for delayed events */
/* list of local addresses when add/del in progress */
struct sctpladdr sctp_restricted_addrs;
struct sctpnetlisthead nets;
/* Free chunk list */
struct sctpchunk_listhead free_chunks;
/* Free stream output control list */
struct sctp_streamhead free_strmoq;
/* Control chunk queue */
struct sctpchunk_listhead control_send_queue;
/*
* Once a TSN hits the wire it is moved to the sent_queue. We
* maintain two counts here (don't know if any but retran_cnt is
* needed). The idea is that the sent_queue_retran_cnt reflects how
* many chunks have been marked for retranmission by either T3-rxt
* or FR.
*/
struct sctpchunk_listhead sent_queue;
struct sctpchunk_listhead send_queue;
/* re-assembly queue for fragmented chunks on the inbound path */
struct sctpchunk_listhead reasmqueue;
/*
* this queue is used when we reach a condition that we can NOT put
* data into the socket buffer. We track the size of this queue and
* set our rwnd to the space in the socket minus also the
* size_on_delivery_queue.
*/
struct sctpwheel_listhead out_wheel;
/*
* This pointer will be set to NULL most of the time. But when we
* have a fragmented message, where we could not get out all of the
* message at the last send then this will point to the stream to go
* get data from.
*/
struct sctp_stream_out *locked_on_sending;
/* If an iterator is looking at me, this is it */
struct sctp_iterator *stcb_starting_point_for_iterator;
/* ASCONF destination address last sent to */
/* struct sctp_nets *asconf_last_sent_to;*/
/* Peter, greppign for the above shows only on strange set
* I don't think we need it so I have commented it out.
*/
/* ASCONF save the last ASCONF-ACK so we can resend it if necessary */
struct mbuf *last_asconf_ack_sent;
/*
* pointer to last stream reset queued to control queue by us with
* requests.
*/
struct sctp_tmit_chunk *str_reset;
/*
* if Source Address Selection happening, this will rotate through
* the link list.
*/
struct sctp_laddr *last_used_address;
/* stream arrays */
struct sctp_stream_in *strmin;
struct sctp_stream_out *strmout;
uint8_t *mapping_array;
/* primary destination to use */
struct sctp_nets *primary_destination;
/* For CMT */
struct sctp_nets *last_net_data_came_from;
/* last place I got a data chunk from */
struct sctp_nets *last_data_chunk_from;
/* last place I got a control from */
struct sctp_nets *last_control_chunk_from;
/* circular looking for output selection */
struct sctp_stream_out *last_out_stream;
/*
* wait to the point the cum-ack passes req->send_reset_at_tsn for
* any req on the list.
*/
struct sctp_resethead resetHead;
/* queue of chunks waiting to be sent into the local stack */
struct sctp_readhead pending_reply_queue;
uint32_t vrf_id;
uint32_t cookie_preserve_req;
/* ASCONF next seq I am sending out, inits at init-tsn */
uint32_t asconf_seq_out;
/* ASCONF last received ASCONF from peer, starts at peer's TSN-1 */
uint32_t asconf_seq_in;
/* next seq I am sending in str reset messages */
uint32_t str_reset_seq_out;
/* next seq I am expecting in str reset messages */
uint32_t str_reset_seq_in;
/* various verification tag information */
uint32_t my_vtag; /* The tag to be used. if assoc is re-initited
* by remote end, and I have unlocked this
* will be regenerated to a new random value. */
uint32_t peer_vtag; /* The peers last tag */
uint32_t my_vtag_nonce;
uint32_t peer_vtag_nonce;
uint32_t assoc_id;
/* This is the SCTP fragmentation threshold */
uint32_t smallest_mtu;
/*
* Special hook for Fast retransmit, allows us to track the highest
* TSN that is NEW in this SACK if gap ack blocks are present.
*/
uint32_t this_sack_highest_gap;
/*
* The highest consecutive TSN that has been acked by peer on my
* sends
*/
uint32_t last_acked_seq;
/* The next TSN that I will use in sending. */
uint32_t sending_seq;
/* Original seq number I used ??questionable to keep?? */
uint32_t init_seq_number;
/* The Advanced Peer Ack Point, as required by the PR-SCTP */
/* (A1 in Section 4.2) */
uint32_t advanced_peer_ack_point;
/*
* The highest consequetive TSN at the bottom of the mapping array
* (for his sends).
*/
uint32_t cumulative_tsn;
/*
* Used to track the mapping array and its offset bits. This MAY be
* lower then cumulative_tsn.
*/
uint32_t mapping_array_base_tsn;
/*
* used to track highest TSN we have received and is listed in the
* mapping array.
*/
uint32_t highest_tsn_inside_map;
uint32_t last_echo_tsn;
uint32_t last_cwr_tsn;
uint32_t fast_recovery_tsn;
uint32_t sat_t3_recovery_tsn;
uint32_t tsn_last_delivered;
/*
* For the pd-api we should re-write this a bit more efficent. We
* could have multiple sctp_queued_to_read's that we are building at
* once. Now we only do this when we get ready to deliver to the
* socket buffer. Note that we depend on the fact that the struct is
* "stuck" on the read queue until we finish all the pd-api.
*/
struct sctp_queued_to_read *control_pdapi;
uint32_t tsn_of_pdapi_last_delivered;
uint32_t pdapi_ppid;
uint32_t context;
uint32_t last_reset_action[SCTP_MAX_RESET_PARAMS];
uint32_t last_sending_seq[SCTP_MAX_RESET_PARAMS];
uint32_t last_base_tsnsent[SCTP_MAX_RESET_PARAMS];
#ifdef SCTP_ASOCLOG_OF_TSNS
/*
* special log - This adds considerable size to the asoc, but
* provides a log that you can use to detect problems via kgdb.
*/
struct sctp_tsn_log in_tsnlog[SCTP_TSN_LOG_SIZE];
struct sctp_tsn_log out_tsnlog[SCTP_TSN_LOG_SIZE];
uint16_t tsn_in_at;
uint16_t tsn_out_at;
#endif /* SCTP_ASOCLOG_OF_TSNS */
/*
* window state information and smallest MTU that I use to bound
* segmentation
*/
uint32_t peers_rwnd;
uint32_t my_rwnd;
uint32_t my_last_reported_rwnd;
uint32_t my_rwnd_control_len;
uint32_t total_output_queue_size;
uint32_t sb_cc; /* shadow of sb_cc in one-2-one */
uint32_t sb_mbcnt; /* shadow of sb_mbcnt in one-2-one */
/* 32 bit nonce stuff */
uint32_t nonce_resync_tsn;
uint32_t nonce_wait_tsn;
uint32_t default_flowlabel;
uint32_t pr_sctp_cnt;
int ctrl_queue_cnt; /* could be removed REM */
/*
* All outbound datagrams queue into this list from the individual
* stream queue. Here they get assigned a TSN and then await
* sending. The stream seq comes when it is first put in the
* individual str queue
*/
unsigned int stream_queue_cnt;
unsigned int send_queue_cnt;
unsigned int sent_queue_cnt;
unsigned int sent_queue_cnt_removeable;
/*
* Number on sent queue that are marked for retran until this value
* is 0 we only send one packet of retran'ed data.
*/
unsigned int sent_queue_retran_cnt;
unsigned int size_on_reasm_queue;
unsigned int cnt_on_reasm_queue;
/* amount of data (bytes) currently in flight (on all destinations) */
unsigned int total_flight;
/* Total book size in flight */
unsigned int total_flight_count; /* count of chunks used with
* book total */
/* count of destinaton nets and list of destination nets */
unsigned int numnets;
/* Total error count on this association */
unsigned int overall_error_count;
unsigned int cnt_msg_on_sb;
/* All stream count of chunks for delivery */
unsigned int size_on_all_streams;
unsigned int cnt_on_all_streams;
/* Heart Beat delay in ticks */
unsigned int heart_beat_delay;
/* autoclose */
unsigned int sctp_autoclose_ticks;
/* how many preopen streams we have */
unsigned int pre_open_streams;
/* How many streams I support coming into me */
unsigned int max_inbound_streams;
/* the cookie life I award for any cookie, in seconds */
unsigned int cookie_life;
/* time to delay acks for */
unsigned int delayed_ack;
unsigned int old_delayed_ack;
unsigned int sack_freq;
unsigned int data_pkts_seen;
unsigned int numduptsns;
int dup_tsns[SCTP_MAX_DUP_TSNS];
unsigned int initial_init_rto_max; /* initial RTO for INIT's */
unsigned int initial_rto; /* initial send RTO */
unsigned int minrto; /* per assoc RTO-MIN */
unsigned int maxrto; /* per assoc RTO-MAX */
/* authentication fields */
sctp_auth_chklist_t *local_auth_chunks;
sctp_auth_chklist_t *peer_auth_chunks;
sctp_hmaclist_t *local_hmacs; /* local HMACs supported */
sctp_hmaclist_t *peer_hmacs; /* peer HMACs supported */
struct sctp_keyhead shared_keys; /* assoc's shared keys */
sctp_authinfo_t authinfo; /* randoms, cached keys */
/*
* refcnt to block freeing when a sender or receiver is off coping
* user data in.
*/
uint32_t refcnt;
uint32_t chunks_on_out_queue; /* total chunks floating around,
* locked by send socket buffer */
uint16_t peer_hmac_id; /* peer HMAC id to send */
/*
* Being that we have no bag to collect stale cookies, and that we
* really would not want to anyway.. we will count them in this
* counter. We of course feed them to the pigeons right away (I have
* always thought of pigeons as flying rats).
*/
uint16_t stale_cookie_count;
/*
* For the partial delivery API, if up, invoked this is what last
* TSN I delivered
*/
uint16_t str_of_pdapi;
uint16_t ssn_of_pdapi;
/* counts of actual built streams. Allocation may be more however */
/* could re-arrange to optimize space here. */
uint16_t streamincnt;
uint16_t streamoutcnt;
/* my maximum number of retrans of INIT and SEND */
/* copied from SCTP but should be individually setable */
uint16_t max_init_times;
uint16_t max_send_times;
uint16_t def_net_failure;
/*
* lock flag: 0 is ok to send, 1+ (duals as a retran count) is
* awaiting ACK
*/
uint16_t asconf_sent; /* possibly removable REM */
uint16_t mapping_array_size;
uint16_t last_strm_seq_delivered;
uint16_t last_strm_no_delivered;
uint16_t last_revoke_count;
int16_t num_send_timers_up;
uint16_t stream_locked_on;
uint16_t ecn_echo_cnt_onq;
uint16_t free_chunk_cnt;
uint16_t free_strmoq_cnt;
uint8_t stream_locked;
uint8_t authenticated; /* packet authenticated ok */
/*
* This flag indicates that a SACK need to be sent. Initially this
* is 1 to send the first sACK immediately.
*/
uint8_t send_sack;
/* max burst after fast retransmit completes */
uint8_t max_burst;
uint8_t sat_network; /* RTT is in range of sat net or greater */
uint8_t sat_network_lockout; /* lockout code */
uint8_t burst_limit_applied; /* Burst limit in effect at last send? */
/* flag goes on when we are doing a partial delivery api */
uint8_t hb_random_values[4];
uint8_t fragmented_delivery_inprogress;
uint8_t fragment_flags;
uint8_t last_flags_delivered;
uint8_t hb_ect_randombit;
uint8_t hb_random_idx;
uint8_t hb_is_disabled; /* is the hb disabled? */
uint8_t default_tos;
/* ECN Nonce stuff */
uint8_t receiver_nonce_sum; /* nonce I sum and put in my sack */
uint8_t ecn_nonce_allowed; /* Tells us if ECN nonce is on */
uint8_t nonce_sum_check;/* On off switch used during re-sync */
uint8_t nonce_wait_for_ecne; /* flag when we expect a ECN */
uint8_t peer_supports_ecn_nonce;
/*
* This value, plus all other ack'd but above cum-ack is added
* together to cross check against the bit that we have yet to
* define (probably in the SACK). When the cum-ack is updated, this
* sum is updated as well.
*/
uint8_t nonce_sum_expect_base;
/* Flag to tell if ECN is allowed */
uint8_t ecn_allowed;
/* flag to indicate if peer can do asconf */
uint8_t peer_supports_asconf;
/* pr-sctp support flag */
uint8_t peer_supports_prsctp;
/* peer authentication support flag */
uint8_t peer_supports_auth;
/* stream resets are supported by the peer */
uint8_t peer_supports_strreset;
/*
* packet drop's are supported by the peer, we don't really care
* about this but we bookkeep it anyway.
*/
uint8_t peer_supports_pktdrop;
/* Do we allow V6/V4? */
uint8_t ipv4_addr_legal;
uint8_t ipv6_addr_legal;
/* Address scoping flags */
/* scope value for IPv4 */
uint8_t ipv4_local_scope;
/* scope values for IPv6 */
uint8_t local_scope;
uint8_t site_scope;
/* loopback scope */
uint8_t loopback_scope;
/* flags to handle send alternate net tracking */
uint8_t used_alt_onsack;
uint8_t used_alt_asconfack;
uint8_t fast_retran_loss_recovery;
uint8_t sat_t3_loss_recovery;
uint8_t dropped_special_cnt;
uint8_t seen_a_sack_this_pkt;
uint8_t stream_reset_outstanding;
uint8_t stream_reset_out_is_outstanding;
uint8_t delayed_connection;
uint8_t ifp_had_enobuf;
uint8_t saw_sack_with_frags;
uint8_t in_restart_hash;
uint8_t assoc_up_sent;
/* CMT variables */
uint8_t cmt_dac_pkts_rcvd;
uint8_t sctp_cmt_on_off;
uint8_t iam_blocking;
uint8_t cookie_how[8];
/*
* The mapping array is used to track out of order sequences above
* last_acked_seq. 0 indicates packet missing 1 indicates packet
* rec'd. We slide it up every time we raise last_acked_seq and 0
* trailing locactions out. If I get a TSN above the array
* mappingArraySz, I discard the datagram and let retransmit happen.
*/
uint32_t marked_retrans;
uint32_t timoinit;
uint32_t timodata;
uint32_t timosack;
uint32_t timoshutdown;
uint32_t timoheartbeat;
uint32_t timocookie;
uint32_t timoshutdownack;
struct timeval start_time;
struct timeval discontinuity_time;
};
#endif