Adrian Chadd 9a4cf01f45 Add Atheros AR1111 support to the HAL.
This seems to probe/attach as an AR9485 and thus nothing else besides
adding the device id seems to be required.

ath0: <Atheros AR1111> mem 0xf4800000-0xf487ffff irq 19 at device 0.0 on pci5
ath0: [HT] enabling HT modes
ath0: [HT] enabling short-GI in 20MHz mode
ath0: [HT] 1 stream STBC receive enabled
ath0: [HT] 1 RX streams; 1 TX streams
ath0: AR9485 mac 576.1 RF5110 phy 1926.8
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000

The NIC I have here is a 1 antenna, 2GHz only device.

Thankyou to Jim Thompson <jim@netgate.com> for the AR1111 NIC.

Tested:

* AR1111 (pretending not to be an AR9485, but failing miserably);
  STA mode with powersave.

Relnotes:	yes
Sponsored by:	Netgate
2014-05-05 07:58:05 +00:00
..
2014-04-17 14:16:02 +00:00
2013-09-04 18:42:05 +00:00
2013-10-29 11:17:49 +00:00
2014-05-03 11:23:10 +00:00
2013-10-29 11:17:49 +00:00
2014-03-02 07:39:37 +00:00
2013-08-28 14:49:36 +00:00
2013-10-28 23:34:05 +00:00
2013-07-07 19:47:22 +00:00
2014-02-20 04:56:55 +00:00
2013-09-05 23:14:27 +00:00
2014-04-30 06:40:30 +00:00
2013-10-29 11:17:49 +00:00
2013-10-29 11:17:49 +00:00
2014-02-04 20:52:33 +00:00