d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
freebsd-skq/sys/dev
History
thompsa 9b2e43a4a4 Add the Sierra MC8700.
2010-11-15 02:27:01 +00:00
..
aac
Previously, the aac driver did not handle enclosure management AIFs,
2010-09-29 14:22:00 +00:00
acpi_support
Remove an unnecessary hack from ACPICA 20100915 (r212761).
2010-09-16 20:11:40 +00:00
acpica
Create C1 state when _CST is valid but _CST does not have one. Some BIOSes
2010-11-12 17:10:12 +00:00
adb
…
adlink
…
advansys
…
ae
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
age
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
agp
Add a driver for the Apple Uninorth AGP host bridge found in all PowerPC
2010-10-31 18:27:05 +00:00
aha
…
ahb
…
ahci
Teach ahci(4), siis(4) and ATA_CAM ata(4) wrapper report to CAM residual
2010-11-08 15:36:15 +00:00
aic
…
aic7xxx
Revert r213765. This is required because our build infrastructure uses
2010-10-14 19:19:19 +00:00
alc
Don't bother to enable ASPM L1 to save more power. Even though I am
2010-10-30 01:12:54 +00:00
ale
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
amd
…
amdsbwd
amdsbwd: fix nonsensical timeout calculations
2010-05-31 09:07:23 +00:00
amdtemp
…
amr
Fix clang warning on empty statement.
2010-07-28 16:24:11 +00:00
an
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
arcmsr
Workaround build for PAE case for now - revert the PHYS
2010-11-14 05:05:41 +00:00
asmc
…
asr
…
ata
Fix typos.
2010-11-09 10:59:09 +00:00
ath
Fix indenting/whitespace issues introduced by me.
2010-08-15 11:40:53 +00:00
atkbdc
bus_add_child: change type of order parameter to u_int
2010-09-10 11:19:03 +00:00
auxio
…
bce
o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control
2010-11-14 13:26:10 +00:00
bfe
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
bge
Move the limiting of the PHY to 10/100 modes of operation due to limitations
2010-11-14 15:15:22 +00:00
bktr
Fix build on architectures where PAGE_SIZE is a long (sparc64, powerpc).
2010-07-13 19:27:20 +00:00
bm
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
buslogic
…
bwi
Instead of using the AMRR ratectl algo as default for drivers which have
2010-11-06 18:17:20 +00:00
bwn
Instead of using the AMRR ratectl algo as default for drivers which have
2010-11-06 18:17:20 +00:00
cardbus
…
cas
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
ce
Revert r213793.
2010-10-13 17:38:23 +00:00
cfe
Start using the 'init_static_kenv()' API provided by r198561 to initialize
2010-08-11 02:13:50 +00:00
cfi
Convert Freescale PowerPC platforms to FDT convention.
2010-07-11 21:08:29 +00:00
ciss
Cosmetic: make it less confusing when displaying RAID 1 level, that might
2010-10-02 08:18:19 +00:00
cm
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
cmx
…
coretemp
Catch known CPUs before using IA32_TEMPERATURE_TARGET.
2010-08-04 00:25:13 +00:00
cp
Revert r213793.
2010-10-13 17:38:23 +00:00
cpuctl
…
cpufreq
…
cs
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
ct
…
ctau
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
cx
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
cxgb
Re-add r212370 now that the LOR in powerpc64 has been resolved:
2010-09-16 16:13:12 +00:00
cy
…
dc
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 23:34:31 +00:00
dcons
…
de
…
digi
…
dpms
…
dpt
…
drm
Fix typos.
2010-11-09 10:59:09 +00:00
e1000
Sync the lem code up with the vlan and other fixes in em.
2010-11-01 20:19:25 +00:00
ed
Converted the remainder of the NIC drivers to use the mii_attach()
2010-10-15 15:00:30 +00:00
eisa
…
en
…
ep
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
esp
Include <machine/ofw_machdep.h> for OF_getscsinitid().
2010-05-10 20:02:39 +00:00
et
Converted the remainder of the NIC drivers to use the mii_attach()
2010-10-15 15:00:30 +00:00
ex
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
exca
…
fatm
…
fb
Fix segment:offset calculation of interrupt vector for relocated video BIOS
2010-09-13 19:58:46 +00:00
fdc
Fix a regression from r200554, which broke fdc(4) attachment to acpi(4).
2010-05-30 03:45:41 +00:00
fdt
Eliminate FDT_IMMR_VA define.
2010-07-19 18:47:18 +00:00
fe
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
firewire
Fix grammar.
2010-10-18 14:26:29 +00:00
flash
Add s25sl064a, an 8mb SPI flash part.
2010-08-17 16:27:13 +00:00
fxp
Add TSO support over VLAN for i82550/i82551. Controller requires
2010-10-24 21:59:51 +00:00
gem
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
glxsb
…
gpio
Add a GPIO driver for the Gateworks Cambria platform.
2010-11-11 20:18:33 +00:00
hatm
…
hifn
- Do not place variables to memory allocated by busdma. pre/post ops
2010-09-24 04:46:46 +00:00
hme
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
hptiop
Report transport type in XPT_PATH_INQ.
2010-06-19 13:41:17 +00:00
hptmv
Report transport type in XPT_PATH_INQ.
2010-06-19 13:42:14 +00:00
hptrr
Pass a format string to make_dev().
2010-10-13 14:41:52 +00:00
hwpmc
Fix two aliases that had the same name but were pointing to different
2010-10-04 17:22:18 +00:00
ic
…
ichsmb
Add support for Intel Cougar Point SMBus controller.
2010-08-27 23:24:08 +00:00
ichwd
Add Intel Cougar Point PCH LPC Controller Device IDs
2010-08-28 00:09:46 +00:00
ida
…
ie
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
ieee488
GPIB overhaul, part #2: make the tnt4882 driver work with the newer
2010-02-01 21:21:10 +00:00
if_ndis
There is no reason to call rt_ifmsg(), remove it.
2010-10-19 19:11:36 +00:00
iicbus
Provide support for IIC_M_NOSTOP/IIC_M_NOSTART for bit-banging and
2010-11-08 19:53:16 +00:00
iir
…
io
- Extract the IODEV_PIO interface from ia64 and make it MI.
2010-04-28 15:38:01 +00:00
ipmi
Fix test for double-nul characters that terminate the string table at
2010-07-29 13:46:37 +00:00
ips
…
ipw
Enable 5.5 and 11Mbit TX rates.
2010-05-11 17:14:17 +00:00
iscsi/initiator
Remove the freelist, which simply duplicates some of the zone allocator's
2010-09-02 14:13:43 +00:00
isp
Fix typos.
2010-11-09 10:59:09 +00:00
ispfw
Don't spam dmesg with "registered firmware ..." when module is compiled
2010-03-05 03:37:42 +00:00
iwi
The firmware does pad notifications to an even number of bytes (at least
2010-10-23 11:26:22 +00:00
iwn
Instead of using the AMRR ratectl algo as default for drivers which have
2010-11-06 18:17:20 +00:00
ixgb
Do not allocate multicast array memory in multicast filter
2010-08-28 00:34:22 +00:00
ixgbe
Fix typos.
2010-11-09 10:59:09 +00:00
jme
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
joy
…
kbd
Explicitly tell the compiler that we don't care about the return value
2010-10-13 11:37:12 +00:00
kbdmux
Explicitly tell the compiler that we don't care about the return value
2010-10-13 11:37:12 +00:00
ksyms
…
le
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
led
Fix an incorrect use of sbuf_overflowed() after a call to sbuf_finish().
2010-09-09 18:35:08 +00:00
lge
Converted the remainder of the NIC drivers to use the mii_attach()
2010-10-15 15:00:30 +00:00
lindev
…
lmc
…
malo
Fix firmware module dependencies.
2010-09-10 08:11:48 +00:00
mc146818
…
mca
…
mcd
…
md
Allow the MDIOCATTACH ioctl operation to originate from within the kernel.
2010-10-18 04:26:32 +00:00
mem
…
mfi
Update PD state firmware definitions: add copyback, system.
2010-10-21 10:38:52 +00:00
mge
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
mii
Move the limiting of the PHY to 10/100 modes of operation due to limitations
2010-11-14 15:15:22 +00:00
mk48txx
…
mlx
…
mly
…
mmc
Report relative card address to NewBus as location string.
2010-05-23 09:44:48 +00:00
mn
…
mps
Currently only opt_compat.h is included by the mps(4) driver. Also
2010-10-15 15:24:59 +00:00
mpt
Use the correct variable for determining the verbosity level in mpt_lprtc().
2010-11-14 22:34:33 +00:00
mse
…
msk
o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control
2010-11-14 13:26:10 +00:00
mvs
Workaround strange situation when EDMA_RESQIP register returns zero instead
2010-10-20 07:47:31 +00:00
mwl
Fix firmware module dependencies.
2010-09-10 08:11:48 +00:00
mxge
Add interrupt descriptions for mxge's msi-x vectors
2010-05-21 15:57:24 +00:00
my
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
ncv
…
nfe
P5N32-SLI PREMIUM from ASUSTeK is known to have MSI/MSI-X issue
2010-11-14 23:37:43 +00:00
nge
Converted the remainder of the NIC drivers to use the mii_attach()
2010-10-15 15:00:30 +00:00
nmdm
…
nsp
…
null
Mark /dev/zero and /dev/null as eternal.
2010-08-06 09:47:48 +00:00
nve
Converted the remainder of the NIC drivers to use the mii_attach()
2010-10-15 15:00:30 +00:00
nvram
…
nxge
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
ofw
Return IEEE 1275 compliant error codes.
2010-11-11 13:42:46 +00:00
patm
…
pbio
…
pccard
Fix typos.
2010-11-09 10:59:09 +00:00
pccbb
…
pcf
…
pci
The EHCI_CAPLENGTH and EHCI_HCIVERSION registers are actually sub-registers
2010-10-25 15:51:43 +00:00
pcn
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
pdq
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
powermac_nvram
Add support for the Sharp/Micron flash chips to powermac_mvram(4).
2010-09-05 20:04:02 +00:00
ppbus
bus_add_child: change type of order parameter to u_int
2010-09-10 11:19:03 +00:00
ppc
Add PCI ID for MCS9901's parallel port.
2010-03-23 20:08:18 +00:00
pst
…
pty
…
puc
Add support for the Perle Speed4 LE.
2010-05-20 13:16:42 +00:00
quicc
Convert Freescale PowerPC platforms to FDT convention.
2010-07-11 21:08:29 +00:00
ral
Instead of using the AMRR ratectl algo as default for drivers which have
2010-11-06 18:17:20 +00:00
random
Use the fpu_kern_enter() interface to properly separate usermode FPU
2010-06-05 16:00:53 +00:00
rc
…
re
Add flow control for all re(4) controllers. re(4) controllers do
2010-11-15 00:06:19 +00:00
rndtest
…
rp
…
safe
…
sbni
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
scc
…
scd
…
sdhci
…
sec
Convert Freescale PowerPC platforms to FDT convention.
2010-07-11 21:08:29 +00:00
sf
Converted the remainder of the NIC drivers to use the mii_attach()
2010-10-15 15:00:30 +00:00
sge
Converted the remainder of the NIC drivers to use the mii_attach()
2010-10-15 15:00:30 +00:00
si
…
siba
bus_add_child: change type of order parameter to u_int
2010-09-10 11:19:03 +00:00
siis
Teach ahci(4), siis(4) and ATA_CAM ata(4) wrapper report to CAM residual
2010-11-08 15:36:15 +00:00
sio
…
sis
Correct handling of shared interrupt in sis_intr(). r212116 incorrectly
2010-10-20 00:19:25 +00:00
sk
Fix a long standing bug in programming station address for Yukon
2010-11-06 22:07:22 +00:00
smbus
…
smc
Converted the remainder of the NIC drivers to use the mii_attach()
2010-10-15 15:00:30 +00:00
sn
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
snc
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
snp
…
sound
Fix typos.
2010-11-09 10:59:09 +00:00
speaker
…
spibus
bus_add_child: change type of order parameter to u_int
2010-09-10 11:19:03 +00:00
ste
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
stg
…
stge
o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control
2010-11-14 13:26:10 +00:00
streams
…
sym
- On sparc64 obtain the initiator ID from the Open Firmware device tree
2010-04-27 18:05:33 +00:00
syscons
Fix typos.
2010-11-09 10:59:09 +00:00
tdfx
…
ti
Neither the page lock nor the page queues lock is required to unwire and
2010-05-03 15:51:59 +00:00
tl
- Add IFM_10_2 and IFM_10_5 media via tlphy(4) only in case the respective
2010-10-24 12:51:02 +00:00
tpm
Add tpm(4) driver for Trusted Platform Module.
2010-08-12 00:16:18 +00:00
trm
…
tsec
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
twa
Fix a compile problem introduced with r212008 on 32bit:
2010-09-04 16:27:14 +00:00
twe
…
tx
Converted the remainder of the NIC drivers to use the mii_attach()
2010-10-15 15:00:30 +00:00
txp
…
uart
Fix typos.
2010-11-09 10:59:09 +00:00
ubsec
Cast the bus_size_t to a intmax_t rather than assuming type-punning to
2010-03-29 17:26:24 +00:00
usb
Add the Sierra MC8700.
2010-11-15 02:27:01 +00:00
utopia
…
vge
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
vkbd
…
vr
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
vx
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
watchdog
…
wb
Fix indentation in r213894.
2010-11-07 12:29:26 +00:00
wds
…
wi
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
wl
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
wpi
Instead of using the AMRR ratectl algo as default for drivers which have
2010-11-06 18:17:20 +00:00
xe
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
xen
sys/dev/xen/blkback/blkback.c:
2010-10-28 04:14:28 +00:00
xl
Add flow control for 3C905B and newer controllers. Note, these
2010-11-14 23:53:13 +00:00