freebsd-skq/sys/i386/isa/if_lnc.h
kato 2bf7610420 Support C-NET(98)S ethernet card (PC-98 only).
Submitted by:	Chiharu Shibata <chi@rd.njk.co.jp>
1998-02-10 03:22:20 +00:00

181 lines
4.4 KiB
C

/*
* Copyright (c) 1994, Paul Richards. This software may be used, modified,
* copied, distributed, and sold, in both source and binary form provided
* that the above copyright and these terms are retained. Under no
* circumstances is the author responsible for the proper functioning
* of this software, nor does the author assume any responsibility
* for damages incurred with its use.
*
*/
#include <i386/isa/ic/Am7990.h>
/*
* Initialize multicast address hashing registers to accept
* all multicasts (only used when in promiscuous mode)
*/
#if NBPFILTER > 0
#define MULTI_INIT_ADDR 0xff
#else
#define MULTI_INIT_ADDR 0
#endif
#define NORMAL 0
#define NRDRE 3
#define NTDRE 3
#define RECVBUFSIZE 1518 /* Packet size rounded to dword boundary */
#define TRANSBUFSIZE 1518
#define MBUF_CACHE_LIMIT 0
#define MEM_SLEW 8
/* BICC port addresses */
#define BICC_IOSIZE 16
#define BICC_RDP 0x0c /* Register Data Port */
#define BICC_RAP 0x0e /* Register Address Port */
/* NE2100 port addresses */
#define NE2100_IOSIZE 24
#define PCNET_RDP 0x10 /* Register Data Port */
#define PCNET_RAP 0x12 /* Register Address Port */
#define PCNET_RESET 0x14
#define PCNET_IDP 0x16
#define PCNET_VSW 0x18
/* DEPCA port addresses */
#define DEPCA_IOSIZE 16
#define DEPCA_CTRL 0x00 /* NIC Control and status register */
#define DEPCA_RDP 0x04 /* Register Data Port */
#define DEPCA_RAP 0x06 /* Register Address Port */
#define DEPCA_ADP 0x0c
/* DEPCA specific defines */
#define DEPCA_ADDR_ROM_SIZE 32
#ifdef PC98
/* C-NET(98)S port addresses */
#define CNET98S_RDP 0x400 /* Register Data Port */
#define CNET98S_RAP 0x402 /* Register Address Port */
#define CNET98S_RESET 0x404
#define CNET98S_IDP 0x406
#define CNET98S_EEPROM 0x40e
/*
* XXX - The I/O address range is fragmented in the C-NET(98)S.
* This is the number of regs at iobase.
*/
#define CNET98S_IOSIZE 16 /* # of i/o addresses used. */
#endif
/* Chip types */
#define LANCE 1 /* Am7990 */
#define C_LANCE 2 /* Am79C90 */
#define PCnet_ISA 3 /* Am79C960 */
#define PCnet_ISAplus 4 /* Am79C961 */
#define PCnet_32 5 /* Am79C965 */
#define PCnet_PCI 6 /* Am79C970 */
/* CSR88-89: Chip ID masks */
#define AMD_MASK 0x003
#define PART_MASK 0xffff
#define Am79C960 0x0003
#define Am79C961 0x2260
#define Am79C965 0x2430
#define Am79C970 0x0242
/* Board types */
#define UNKNOWN 0
#define BICC 1
#define NE2100 2
#define DEPCA 3
#define CNET98S 4 /* PC-98 */
/* mem_mode values */
#define DMA_FIXED 1
#define DMA_MBUF 2
#define SHMEM 4
#define MEM_MODES \
"\20\3SHMEM\2DMA_MBUF\1DMA_FIXED"
#define CSR0_FLAGS \
"\20\20ERR\17BABL\16CERR\15MISS\14MERR\13RINT\12TINT\11IDON\
\10INTR\07INEA\06RXON\05TXON\04TDMD\03STOP\02STRT\01INIT"
#define INIT_MODE \
"\20\20PROM\07INTL\06DRTY\05COLL\04DTCR\03LOOP\02DTX\01DRX"
#define RECV_MD1 \
"\20\10OWN\7ERR\6FRAM\5OFLO\4CRC\3BUFF\2STP\1ENP"
#define TRANS_MD1 \
"\20\10OWN\7ERR\6RES\5MORE\4ONE\3DEF\2STP\1ENP"
#define TRANS_MD3 \
"\20\6BUFF\5UFLO\4RES\3LCOL\2LCAR\1RTRY"
struct nic_info {
int ident; /* Type of card */
int ic; /* Type of ic, Am7990, Am79C960 etc. */
int mem_mode;
int iobase;
int mode; /* Mode setting at initialization */
};
struct host_ring_entry {
struct mds *md;
union {
struct mbuf *mbuf;
char *data;
}buff;
};
#ifdef LNC_KEEP_STATS
#define LNCSTATS_STRUCT \
struct lnc_stats { \
int idon; \
int rint; \
int tint; \
int cerr; \
int babl; \
int miss; \
int merr; \
int rxoff; \
int txoff; \
int terr; \
int lcol; \
int lcar; \
int tbuff; \
int def; \
int more; \
int one; \
int uflo; \
int rtry; \
int rerr; \
int fram; \
int oflo; \
int crc; \
int rbuff; \
int drop_packet; \
int trans_ring_full; \
} lnc_stats;
#define LNCSTATS(X) ++(sc->lnc_stats.X);
#else
#define LNCSTATS_STRUCT
#define LNCSTATS(X)
#endif
#define NDESC(len2) (1 << len2)
#define INC_MD_PTR(ptr, no_entries) \
if (++ptr >= NDESC(no_entries)) \
ptr = 0;
#define DEC_MD_PTR(ptr, no_entries) \
if (--ptr < 0) \
ptr = NDESC(no_entries) - 1;
#define RECV_NEXT (sc->recv_ring->base + sc->recv_next)
#define TRANS_NEXT (sc->trans_ring->base + sc->trans_next)