freebsd-skq/sys/i386/isa/wfd.c
pst 81b6e7dabd Change wfd major block device to 1 as part of the effort to make wfd's
bootable without a big increase in boot2's size.
1998-02-13 22:41:00 +00:00

850 lines
22 KiB
C

/*
* Copyright (c) 1997,1998 Junichi Satoh <junichi@astec.co.jp>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer as
* the first lines of this file unmodified.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY Junichi Satoh ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL Junichi Satoh BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $Id: wfd.c,v 1.7 1998/02/09 06:08:44 eivind Exp $
*/
/*
* ATAPI Floppy, LS-120 driver
*/
#include "wdc.h"
#include "wfd.h"
#include "opt_atapi.h"
#if NWFD > 0 && NWDC > 0 && defined (ATAPI)
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/conf.h>
#include <sys/proc.h>
#include <sys/malloc.h>
#include <sys/buf.h>
#include <sys/disklabel.h>
#include <sys/diskslice.h>
#include <sys/cdio.h>
#ifdef DEVFS
#include <sys/devfsext.h>
#endif /*DEVFS*/
#include <i386/isa/atapi.h>
static d_open_t wfdbopen;
static d_close_t wfdbclose;
static d_ioctl_t wfdioctl;
static d_strategy_t wfdstrategy;
#define CDEV_MAJOR 87
#define BDEV_MAJOR 1
static struct cdevsw wfd_cdevsw;
static struct bdevsw wfd_bdevsw =
{ wfdbopen, wfdbclose, wfdstrategy, wfdioctl,
nodump, nopsize, 0, "wfd", &wfd_cdevsw, -1 };
#ifndef ATAPI_STATIC
static
#endif
int wfdattach(struct atapi*, int, struct atapi_params*, int);
#define NUNIT (NWDC*2) /* Max. number of devices */
#define UNIT(d) ((minor(d) >> 3) & 3) /* Unit part of minor device number */
#define F_BOPEN 0x0001 /* The block device is opened */
#define F_MEDIA_CHANGED 0x0002 /* The media have changed since open */
#define F_DEBUG 0x0004 /* Print debug info */
/*
* LS-120 Capabilities and Mechanical Status Page
*/
struct cappage {
/* Mode data header */
u_short data_length;
u_char medium_type;
#define MDT_UNKNOWN 0x00
#define MDT_NO_DISC 0x70
#define MDT_DOOR_OPEN 0x71
#define MDT_FMT_ERROR 0x72
#define MDT_2DD_UN 0x10
#define MDT_2DD 0x11
#define MDT_2HD_UN 0x20
#define MDT_2HD_12_98 0x22
#define MDT_2HD_12 0x23
#define MDT_2HD_144 0x24
#define MDT_LS120 0x31
unsigned reserved0 :7;
unsigned wp :1; /* Write protect */
u_char reserved1[4];
/* Capabilities page */
unsigned page_code :6; /* Page code - Should be 0x5 */
#define CAP_PAGE 0x05
unsigned reserved1_6 :1; /* Reserved */
unsigned ps :1; /* The device is capable of savi
ng the page */
u_char page_length; /* Page Length - Should be 0x1e */
u_short transfer_rate; /* In kilobits per second */
u_char heads, sectors; /* Number of heads, Number of sectors per track */
u_short sector_size; /* Byes per sector */
u_short cyls; /* Number of cylinders */
u_char reserved10[10];
u_char motor_delay; /* Motor off delay */
u_char reserved21[7];
u_short rpm; /* Rotations per minute */
u_char reserved30[2];
};
/* misuse a flag to identify format operation */
#define B_FORMAT B_XXX
struct wfd {
struct atapi *ata; /* Controller structure */
int unit; /* IDE bus drive unit */
int lun; /* Logical device unit */
int flags; /* Device state flags */
int refcnt; /* The number of raw opens */
int maxblks; /* transfer size limit */
struct buf_queue_head buf_queue; /* Queue of i/o requests */
struct atapi_params *param; /* Drive parameters table */
struct cappage cap; /* Capabilities page info */
char description[80]; /* Device description */
#ifdef DEVFS
void *cdevs;
void *bdevs;
#endif
struct diskslices *dk_slices; /* virtual drives */
};
static struct wfd *wfdtab[NUNIT]; /* Drive info by unit number */
static int wfdnlun = 0; /* Number of configured drives */
static void wfd_start (struct wfd *t);
static void wfd_done (struct wfd *t, struct buf *bp, int resid,
struct atapires result);
static void wfd_error (struct wfd *t, struct atapires result);
static int wfd_request_wait (struct wfd *t, u_char cmd, u_char a1, u_char a2,
u_char a3, u_char a4, u_char a5, u_char a6, u_char a7, u_char a8,
u_char a9, char *addr, int count);
static void wfd_describe (struct wfd *t);
static int wfd_eject (struct wfd *t, int closeit);
static void wfdstrategy1(struct buf *bp);
/*
* Dump the array in hexadecimal format for debugging purposes.
*/
static void wfd_dump (int lun, char *label, void *data, int len)
{
u_char *p = data;
printf ("wfd%d: %s %x", lun, label, *p++);
while (--len > 0)
printf ("-%x", *p++);
printf ("\n");
}
#ifndef ATAPI_STATIC
static
#endif
int
wfdattach (struct atapi *ata, int unit, struct atapi_params *ap, int debug)
{
struct wfd *t;
struct atapires result;
int lun, i;
#ifdef DEVFS
int mynor;
#endif
if (wfdnlun >= NUNIT) {
printf ("wfd: too many units\n");
return (0);
}
if (!atapi_request_immediate) {
printf("wfd: configuration error, ATAPI core code not present!\n");
printf("wfd: check `options ATAPI_STATIC' in your kernel config file!\n");
return (0);
}
t = malloc (sizeof (struct wfd), M_TEMP, M_NOWAIT);
if (! t) {
printf ("wfd: out of memory\n");
return (0);
}
wfdtab[wfdnlun] = t;
bzero (t, sizeof (struct wfd));
bufq_init(&t->buf_queue);
t->ata = ata;
t->unit = unit;
lun = t->lun = wfdnlun++;
t->param = ap;
t->flags = F_MEDIA_CHANGED;
t->refcnt = 0;
if (debug) {
t->flags |= F_DEBUG;
/* Print params. */
wfd_dump (t->lun, "info", ap, sizeof *ap);
}
/* Get drive capabilities. */
/* Do it twice to avoid the stale media changed state. */
for (i = 0; i < 2; i++) {
result = atapi_request_immediate (ata, unit, ATAPI_MODE_SENSE,
0, CAP_PAGE, 0, 0, 0, 0,
sizeof (t->cap) >> 8, sizeof (t->cap),
0, 0, 0, 0, 0, 0, 0, (char*) &t->cap, sizeof (t->cap));
}
if (result.code == RES_ERR &&
(result.error & AER_SKEY) == AER_SK_UNIT_ATTENTION)
result = atapi_request_immediate (ata, unit, ATAPI_MODE_SENSE,
0, CAP_PAGE, 0, 0, 0, 0, sizeof (t->cap) >> 8,
sizeof (t->cap), 0, 0, 0, 0, 0, 0, 0,
(char*) &t->cap, sizeof (t->cap));
/* Some drives have shorter capabilities page. */
if (result.code == RES_UNDERRUN)
result.code = 0;
if (result.code == 0) {
wfd_describe (t);
if (t->flags & F_DEBUG)
wfd_dump (t->lun, "cap", &t->cap, sizeof t->cap);
} else
return -1;
/*
* The IOMEGA ZIP 100, at firmware 21.* and 23.* at least
* is known to lock up if transfers > 64 blocks are
* requested.
*/
if (!strcmp(ap->model, "IOMEGA ZIP 100 ATAPI")) {
printf("wfd%d: buggy Zip drive, 64-block transfer limit set\n",
t->lun);
t->maxblks = 64;
} else {
t->maxblks = 0; /* no limit */
}
#ifdef DEVFS
mynor = dkmakeminor(t->lun, WHOLE_DISK_SLICE, RAW_PART);
t->bdevs = devfs_add_devswf(&wfd_bdevsw, mynor,
DV_BLK, UID_ROOT, GID_OPERATOR, 0640,
"wfd%d", t->lun);
t->cdevs = devfs_add_devswf(&wfd_cdevsw, mynor,
DV_CHR, UID_ROOT, GID_OPERATOR, 0640,
"rwfd%d", t->lun);
#endif /* DEVFS */
return (1);
}
void wfd_describe (struct wfd *t)
{
int no_print = 0;
t->cap.cyls = ntohs (t->cap.cyls);
t->cap.sector_size = ntohs (t->cap.sector_size);
printf ("wfd%d: ", t->lun);
switch (t->cap.medium_type) {
case MDT_UNKNOWN:
printf ("medium type unknown (no disk)");
no_print = 1;
break;
case MDT_2DD_UN:
printf ("2DD(capacity unknown) floppy disk loaded");
no_print = 1;
break;
case MDT_2DD:
printf ("720KB floppy disk loaded");
break;
case MDT_2HD_UN:
printf ("2HD(capacity unknown) floppy disk loaded");
no_print = 1;
break;
case MDT_2HD_12_98:
printf ("1.25MB(PC-9801 format) floppy disk loaded");
break;
case MDT_2HD_12:
printf ("1.2MB floppy disk loaded");
break;
case MDT_2HD_144:
printf ("1.44MB floppy disk loaded");
break;
case MDT_LS120:
printf ("120MB floppy disk loaded");
break;
case MDT_NO_DISC:
printf ("no disc inside");
no_print = 1;
break;
case MDT_DOOR_OPEN:
printf ("door open");
no_print = 1;
break;
case MDT_FMT_ERROR:
printf ("medium format error");
no_print = 1;
break;
default:
printf ("medium type=0x%x", t->cap.medium_type);
break;
}
if (t->cap.wp)
printf(", write protected");
printf ("\n");
if (!no_print) {
printf ("wfd%d: ", t->lun);
printf ("%lu cyls", t->cap.cyls);
printf (", %lu heads, %lu S/T", t->cap.heads, t->cap.sectors);
printf (", %lu B/S", t->cap.sector_size);
printf ("\n");
}
}
int wfdbopen (dev_t dev, int flags, int fmt, struct proc *p)
{
int lun = UNIT(dev);
struct wfd *t;
struct atapires result;
int errcode = 0;
struct disklabel label;
/* Check that the device number is legal
* and the ATAPI driver is loaded. */
if (lun >= wfdnlun || ! atapi_request_immediate) {
printf("ENXIO lun=%d, wfdnlun=%d, im=%d\n", lun, wfdnlun, atapi_request_immediate);
return (ENXIO);
}
t = wfdtab[lun];
t->flags &= ~F_MEDIA_CHANGED;
/* Lock the media. */
wfd_request_wait (t, ATAPI_PREVENT_ALLOW,
0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0);
/* Sense the media type */
result = atapi_request_wait (t->ata, t->unit, ATAPI_MODE_SENSE,
0, CAP_PAGE, 0, 0, 0, 0,
sizeof (t->cap) >> 8, sizeof (t->cap),
0, 0, 0, 0, 0, 0, 0,
(char*) &t->cap, sizeof (t->cap));
if (result.code)
printf ("wfd%d: Sense the media type is failed.\n", t->lun);
else {
t->cap.cyls = ntohs (t->cap.cyls);
t->cap.sector_size = ntohs (t->cap.sector_size);
}
/* Build label for whole disk. */
bzero(&label, sizeof label);
label.d_secsize = t->cap.sector_size;
label.d_nsectors = t->cap.sectors;
label.d_ntracks = t->cap.heads;
label.d_ncylinders = t->cap.cyls;
label.d_secpercyl = t->cap.heads * t->cap.sectors;
label.d_rpm = 720;
label.d_secperunit = label.d_secpercyl * t->cap.cyls;
/* Initialize slice tables. */
errcode = dsopen("wfd", dev, fmt, &t->dk_slices, &label, wfdstrategy1,
(ds_setgeom_t *)NULL, &wfd_bdevsw, &wfd_cdevsw);
if (errcode != 0)
return errcode;
t->flags |= F_BOPEN;
return (0);
}
/*
* Close the device. Only called if we are the LAST
* occurence of an open device.
*/
int wfdbclose (dev_t dev, int flags, int fmt, struct proc *p)
{
int lun = UNIT(dev);
struct wfd *t = wfdtab[lun];
dsclose(dev, fmt, t->dk_slices);
if(!dsisopen(t->dk_slices)) {
/* If we were the last open of the entire device, release it. */
if (! t->refcnt)
wfd_request_wait (t, ATAPI_PREVENT_ALLOW,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
t->flags &= ~F_BOPEN;
}
return (0);
}
static void
wfdstrategy1(struct buf *bp)
{
/*
* XXX - do something to make wdstrategy() but not this block while
* we're doing dsinit() and dsioctl().
*/
wfdstrategy(bp);
}
/*
* Actually translate the requested transfer into one the physical driver can
* understand. The transfer is described by a buf and will include only one
* physical transfer.
*/
void wfdstrategy (struct buf *bp)
{
int lun = UNIT(bp->b_dev);
struct wfd *t = wfdtab[lun];
int x;
/* If it's a null transfer, return immediatly. */
if (bp->b_bcount == 0) {
bp->b_resid = 0;
biodone (bp);
return;
}
/*
* Do bounds checking, adjust transfer, and set b_pblkno.
*/
if (dscheck(bp, t->dk_slices) <= 0) {
biodone(bp);
return;
}
x = splbio();
/* Place it in the queue of disk activities for this disk. */
bufqdisksort (&t->buf_queue, bp);
/* Tell the device to get going on the transfer if it's
* not doing anything, otherwise just wait for completion. */
wfd_start (t);
splx(x);
}
/*
* Look to see if there is a buf waiting for the device
* and that the device is not already busy. If both are true,
* It dequeues the buf and creates an ATAPI command to perform the
* transfer in the buf.
* The bufs are queued by the strategy routine (wfdstrategy).
* Must be called at the correct (splbio) level.
*/
static void wfd_start (struct wfd *t)
{
struct buf *bp = bufq_first(&t->buf_queue);
u_long blkno, nblk;
u_char op_code;
long count;
int pxcount, pxnblk;
u_char *pxdest;
/* See if there is a buf to do and we are not already doing one. */
if (! bp)
return;
/* Unqueue the request. */
bufq_remove(&t->buf_queue, bp);
/* We have a buf, now we should make a command
* First, translate the block to absolute and put it in terms of the
* logical blocksize of the device. */
blkno = bp->b_pblkno / (t->cap.sector_size / 512);
nblk = (bp->b_bcount + (t->cap.sector_size - 1)) / t->cap.sector_size;
if ((t->maxblks == 0) || (nblk <= t->maxblks)) {
if(bp->b_flags & B_READ) {
op_code = ATAPI_READ_BIG;
count = bp->b_bcount;
} else {
op_code = ATAPI_WRITE_BIG;
count = -bp->b_bcount;
}
/* only one transfer */
(int)bp->b_driver1 = 0;
(int)bp->b_driver2 = 0;
atapi_request_callback (t->ata, t->unit, op_code, 0,
blkno>>24, blkno>>16, blkno>>8, blkno,
0, nblk>>8, nblk, 0, 0,
0, 0, 0, 0, 0,
(u_char*) bp->b_data, count,
(void*)wfd_done, t, bp);
} else {
/*
* We can't handle this request in a single
* read/write operation. Instead, queue a set of
* transfers, and record the number of transfers
* and the running residual in the b_driver
* fields of the bp.
*/
if(bp->b_flags & B_READ) {
op_code = ATAPI_READ_BIG;
} else {
op_code = ATAPI_WRITE_BIG;
}
/* calculate number of transfers */
(int)bp->b_driver1 = (nblk - 1) / t->maxblks;
(int)bp->b_driver2 = 0;
pxdest = (u_char *)bp->b_data;
pxcount = bp->b_bcount;
/* construct partial transfer requests */
while (nblk > 0) {
pxnblk = min(nblk, t->maxblks);
count = min(pxcount, t->maxblks * t->cap.sector_size);
atapi_request_callback(t->ata, t->unit, op_code, 0,
blkno>>24, blkno>>16, blkno>>8,
blkno, 0, pxnblk>>8, pxnblk,
0, 0, 0, 0, 0, 0, 0,
pxdest,
(bp->b_flags & B_READ) ?
count : -count,
(void*)wfd_done, t, bp);
nblk -= pxnblk;
pxcount -= count;
pxdest += count;
blkno += pxnblk;
}
}
}
static void wfd_done (struct wfd *t, struct buf *bp, int resid,
struct atapires result)
{
if (result.code) {
wfd_error (t, result);
bp->b_error = EIO;
bp->b_flags |= B_ERROR;
} else
(int)bp->b_driver2 += resid;
/*
* We can't call biodone until all outstanding
* transfer fragments are handled. If one hits
* an error, we will be returning an error, but
* only when all are complete.
*/
if (((int)bp->b_driver1)-- <= 0) {
bp->b_resid = (int)bp->b_driver2;
biodone (bp);
}
wfd_start (t);
}
static void wfd_error (struct wfd *t, struct atapires result)
{
if (result.code != RES_ERR)
return;
switch (result.error & AER_SKEY) {
case AER_SK_NOT_READY:
if (result.error & ~AER_SKEY) {
/* Not Ready */
printf ("wfd%d: not ready\n", t->lun);
return;
}
/* Tray open. */
if (! (t->flags & F_MEDIA_CHANGED))
printf ("wfd%d: tray open\n", t->lun);
t->flags |= F_MEDIA_CHANGED;
return;
case AER_SK_UNIT_ATTENTION:
/* Media changed. */
if (! (t->flags & F_MEDIA_CHANGED))
printf ("wfd%d: media changed\n", t->lun);
t->flags |= F_MEDIA_CHANGED;
return;
case AER_SK_ILLEGAL_REQUEST:
/* Unknown command or invalid command arguments. */
if (t->flags & F_DEBUG)
printf ("wfd%d: invalid command\n", t->lun);
return;
}
printf ("wfd%d: i/o error, status=%b, error=%b\n", t->lun,
result.status, ARS_BITS, result.error, AER_BITS);
}
static int wfd_request_wait (struct wfd *t, u_char cmd, u_char a1, u_char a2,
u_char a3, u_char a4, u_char a5, u_char a6, u_char a7, u_char a8,
u_char a9, char *addr, int count)
{
struct atapires result;
result = atapi_request_wait (t->ata, t->unit, cmd,
a1, a2, a3, a4, a5, a6, a7, a8, a9, 0, 0, 0, 0, 0, 0,
addr, count);
if (result.code) {
wfd_error (t, result);
return (EIO);
}
return (0);
}
/*
* Perform special action on behalf of the user.
* Knows about the internals of this device
*/
int wfdioctl (dev_t dev, int cmd, caddr_t addr, int flag, struct proc *p)
{
int lun = UNIT(dev);
struct wfd *t = wfdtab[lun];
int error = 0;
struct disklabel *dl;
char buffer[DEV_BSIZE];
error = dsioctl("wfd", dev, cmd, addr, flag, &t->dk_slices,
wfdstrategy1, (ds_setgeom_t *)NULL);
if (error != -1)
return (error);
if (t->flags & F_MEDIA_CHANGED)
switch (cmd) {
case CDIOCSETDEBUG:
case CDIOCCLRDEBUG:
case CDIOCRESET:
/* These ops are media change transparent. */
break;
default:
/* Lock the media. */
wfd_request_wait (t, ATAPI_PREVENT_ALLOW,
0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0);
break;
}
switch (cmd) {
case CDIOCSETDEBUG:
if (p->p_cred->pc_ucred->cr_uid)
return (EPERM);
t->flags |= F_DEBUG;
atapi_debug (t->ata, 1);
return 0;
case CDIOCCLRDEBUG:
if (p->p_cred->pc_ucred->cr_uid)
return (EPERM);
t->flags &= ~F_DEBUG;
atapi_debug (t->ata, 0);
return 0;
case CDIOCRESET:
if (p->p_cred->pc_ucred->cr_uid)
return (EPERM);
return wfd_request_wait (t, ATAPI_TEST_UNIT_READY,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
case CDIOCEJECT:
/* Don't allow eject if the device is opened
* by somebody (not us) in block mode. */
if ((t->flags & F_BOPEN) && t->refcnt)
return (EBUSY);
return wfd_eject (t, 0);
case CDIOCCLOSE:
if ((t->flags & F_BOPEN) && t->refcnt)
return (0);
return wfd_eject (t, 1);
default:
return (ENOTTY);
}
return (error);
}
static int wfd_eject (struct wfd *t, int closeit)
{
struct atapires result;
/* Try to stop the disc. */
result = atapi_request_wait (t->ata, t->unit, ATAPI_START_STOP,
1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
if (result.code == RES_ERR &&
((result.error & AER_SKEY) == AER_SK_NOT_READY ||
(result.error & AER_SKEY) == AER_SK_UNIT_ATTENTION)) {
int err;
if (!closeit)
return (0);
/*
* The disc was unloaded.
* Load it (close tray).
* Read the table of contents.
*/
err = wfd_request_wait (t, ATAPI_START_STOP,
0, 0, 0, 3, 0, 0, 0, 0, 0, 0, 0);
if (err)
return (err);
/* Lock the media. */
wfd_request_wait (t, ATAPI_PREVENT_ALLOW,
0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0);
return (0);
}
if (result.code) {
wfd_error (t, result);
return (EIO);
}
if (closeit)
return (0);
/* Give it some time to stop spinning. */
tsleep ((caddr_t)&lbolt, PRIBIO, "wfdej1", 0);
tsleep ((caddr_t)&lbolt, PRIBIO, "wfdej2", 0);
/* Unlock. */
wfd_request_wait (t, ATAPI_PREVENT_ALLOW,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
/* Eject. */
t->flags |= F_MEDIA_CHANGED;
return wfd_request_wait (t, ATAPI_START_STOP,
0, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0);
}
#ifdef WFD_MODULE
/*
* Loadable ATAPI Floppy driver stubs.
*/
#include <sys/exec.h>
#include <sys/sysent.h>
#include <sys/lkm.h>
/*
* Construct lkm_dev structures (see lkm.h).
* Our bdevsw/cdevsw slot numbers are 19/69.
*/
MOD_DEV(wfd, LM_DT_BLOCK, BDEV_MAJOR, &wfd_bdevsw);
MOD_DEV(rwfd, LM_DT_CHAR, CDEV_MAJOR, &wfd_cdevsw);
/*
* Function called when loading the driver.
*/
int wfd_load (struct lkm_table *lkmtp, int cmd)
{
struct atapi *ata;
int n, u;
if (! atapi_start)
/* No ATAPI driver available. */
return EPROTONOSUPPORT;
n = 0;
for (ata=atapi_tab; ata<atapi_tab+2; ++ata)
if (ata->port)
for (u=0; u<2; ++u)
/* Probing controller ata->ctrlr, unit u. */
if (ata->params[u] && ! ata->attached[u] &&
wfdattach (ata, u, ata->params[u],
ata->debug) >= 0)
{
/* Drive found. */
ata->attached[u] = 1;
++n;
}
if (! n)
/* No IDE Floppies found. */
return ENXIO;
return 0;
}
/*
* Function called when unloading the driver.
*/
int wfd_unload (struct lkm_table *lkmtp, int cmd)
{
struct wfd **t;
for (t=wfdtab; t<wfdtab+wfdnlun; ++t)
if (((*t)->flags & F_BOPEN) || (*t)->refcnt)
/* The device is opened, cannot unload the driver. */
return EBUSY;
for (t=wfdtab; t<wfdtab+wfdnlun; ++t) {
(*t)->ata->attached[(*t)->unit] = 0;
free (*t, M_TEMP);
}
wfdnlun = 0;
bzero (wfdtab, sizeof(wfdtab));
return 0;
}
/*
* Dispatcher function for the module (load/unload/stat).
*/
int wfd_mod (struct lkm_table *lkmtp, int cmd, int ver)
{
int err = 0;
if (ver != LKM_VERSION)
return EINVAL;
if (cmd == LKM_E_LOAD)
err = wfd_load (lkmtp, cmd);
else if (cmd == LKM_E_UNLOAD)
err = wfd_unload (lkmtp, cmd);
if (err)
return err;
/* XXX Poking around in the LKM internals like this is bad.
*/
/* Register the cdevsw entry. */
lkmtp->private.lkm_dev = & MOD_PRIVATE(rwfd);
err = lkmdispatch (lkmtp, cmd);
if (err)
return err;
/* Register the bdevsw entry. */
lkmtp->private.lkm_dev = & MOD_PRIVATE(wfd);
return lkmdispatch (lkmtp, cmd);
}
#endif /* WFD_MODULE */
static wfd_devsw_installed = 0;
static void wfd_drvinit(void *unused)
{
if( ! wfd_devsw_installed ) {
bdevsw_add_generic(BDEV_MAJOR, CDEV_MAJOR, &wfd_bdevsw);
wfd_devsw_installed = 1;
}
}
SYSINIT(wfddev,SI_SUB_DRIVERS,SI_ORDER_MIDDLE+CDEV_MAJOR,wfd_drvinit,NULL)
#endif /* NWFD && NWDC && ATAPI */