981e271932
This is a nice small outdoor/indoor AP from Ubiquity Networks. The device has: AR7241 CPU SoC AR9287 Wifi 8MB flash 32MB RAM wifi has been tested to work along with leds. Submitted by: loos Approved by: sbruno (mentor, implicit) Tested by: hiren
104 lines
2.8 KiB
Plaintext
104 lines
2.8 KiB
Plaintext
# $FreeBSD$
|
|
|
|
# arge1 MDIO bus
|
|
hint.argemdio.0.at="nexus0"
|
|
hint.argemdio.0.maddr=0x1a000000
|
|
hint.argemdio.0.msize=0x1000
|
|
hint.argemdio.0.order=0
|
|
|
|
# Override MAC Address with the one on EEPROM
|
|
hint.arge.0.eeprommac=0x1fff0000
|
|
|
|
# arge0: dedicated switch port; RMII; dedicated PHY 4 on switch, connected
|
|
# via internal switch MDIO bus.
|
|
hint.arge.0.media=100 # Map to 100/full
|
|
hint.arge.0.fduplex=1 #
|
|
hint.arge.0.phymask=0x10 # PHY4
|
|
hint.arge.0.mdio=mdioproxy1 # .. off of the switch mdiobus
|
|
|
|
# arge1: nail to 1000/full, RMII - connected to the switch
|
|
hint.arge.1.media=1000 # Map to 1000/full
|
|
hint.arge.1.fduplex=1 #
|
|
hint.arge.1.phymask=0x0 # no directly mapped PHYs
|
|
|
|
#
|
|
# AR7240 switch config
|
|
#
|
|
hint.arswitch.0.at="mdio0"
|
|
hint.arswitch.0.is_7240=1 # We need to be explicitly told this
|
|
hint.arswitch.0.numphys=4 # 4 active switch PHYs (PHY 0 -> 3)
|
|
hint.arswitch.0.phy4cpu=1 # Yes, PHY 4 == dedicated PHY
|
|
hint.arswitch.0.is_rgmii=0 # No, not RGMII
|
|
hint.arswitch.0.is_gmii=0 # No, not GMII
|
|
|
|
# ath0 hint - pcie slot 0
|
|
hint.pcib.0.bus.0.0.0.ath_fixup_addr=0x1fff1000
|
|
hint.pcib.0.bus.0.0.0.ath_fixup_size=4096
|
|
|
|
# ath
|
|
hint.ath.0.eeprom_firmware="pcib.0.bus.0.0.0.eeprom_firmware"
|
|
|
|
# GPIO pins
|
|
# Pin 0: red led (sig1)
|
|
# Pin 1: yellow led (sig2)
|
|
# Pin 11: green len (sig3)
|
|
# Pin 7: green len (sig4)
|
|
# Pin 12: Reset switch
|
|
hint.gpio.0.pinmask=0x1883
|
|
|
|
# Signal leds
|
|
hint.gpioled.0.at="gpiobus0"
|
|
hint.gpioled.0.name="sig1"
|
|
hint.gpioled.0.pins=0x0001 # pin 0
|
|
hint.gpioled.1.at="gpiobus0"
|
|
hint.gpioled.1.name="sig2"
|
|
hint.gpioled.1.pins=0x0002 # pin 1
|
|
hint.gpioled.2.at="gpiobus0"
|
|
hint.gpioled.2.name="sig3"
|
|
hint.gpioled.2.pins=0x0800 # pin 11
|
|
hint.gpioled.3.at="gpiobus0"
|
|
hint.gpioled.3.name="sig4"
|
|
hint.gpioled.3.pins=0x0080 # pin 7
|
|
|
|
# GEOM_MAP
|
|
#
|
|
# Picostation M2 HP
|
|
#
|
|
# mtdparts=ar7240-nor0:256k(u-boot),64k(u-boot-env),1024k(kernel),6528k(rootfs),256k(cfg),64k(EEPROM)
|
|
|
|
hint.map.0.at="flash/spi0"
|
|
hint.map.0.start=0x00000000
|
|
hint.map.0.end=0x00040000 # 256k u-boot
|
|
hint.map.0.name="u-boot"
|
|
hint.map.0.readonly=1
|
|
|
|
hint.map.1.at="flash/spi0"
|
|
hint.map.1.start=0x00040000
|
|
hint.map.1.end=0x00050000 # 64k u-boot-env
|
|
hint.map.1.name="u-boot-env"
|
|
hint.map.1.readonly=1
|
|
|
|
hint.map.2.at="flash/spi0"
|
|
hint.map.2.start=0x00050000
|
|
hint.map.2.end=0x00130000 # 896k kernel
|
|
hint.map.2.name="kernel"
|
|
hint.map.2.readonly=1
|
|
|
|
hint.map.3.at="flash/spi0"
|
|
hint.map.3.start=0x130000
|
|
hint.map.3.end=0x007b0000 # 6656k rootfs
|
|
hint.map.3.name="rootfs"
|
|
hint.map.3.readonly=0
|
|
|
|
hint.map.4.at="flash/spi0"
|
|
hint.map.4.start=0x007b0000
|
|
hint.map.4.end=0x007f0000 # 256k cfg
|
|
hint.map.4.name="cfg"
|
|
hint.map.4.readonly=0
|
|
|
|
hint.map.5.at="flash/spi0"
|
|
hint.map.5.start=0x007f0000
|
|
hint.map.5.end=0x00800000 # 64k EEPROM
|
|
hint.map.5.name="eeprom"
|
|
hint.map.5.readonly=1
|