freebsd-skq/sys/pci
wpaul 9d6e371055 Make pcn_miibus_readreg() latch onto the first PHY that it finds (as
a result of mii_phy_probe()) and use that rather than hardcoding a
constant. The hardcoded way was too specific to the particular card
I had and caused PHY probing to fail on at least one laptop with a
built-in AMD chip.

Reported by: rjk@grauel.com (Richard J Kuhns)
2000-09-22 03:49:12 +00:00
..
agp_ali.c
agp_amd.c
agp_i810.c
agp_if.m
agp_intel.c
agp_sis.c
agp_via.c
agp.c
agppriv.h
agpreg.h
agpvar.h
alpm.c
amd.c
amd.h
cy_pci.c Make LINT compile again. 2000-09-16 18:46:05 +00:00
cy_pcireg.h
dc21040reg.h
ide_pcireg.h
if_ar_p.c
if_dc.c If this is a Davicom DM9102A and we're enabling the homePNA link, force 2000-09-20 00:59:17 +00:00
if_dcreg.h Special-case the LED twiddling code so that it doesn't do anything 2000-09-07 18:51:04 +00:00
if_de.c
if_devar.h
if_en_pci.c
if_fxp.c Add the PCI device ID for the on-board ethernet controllers on the 2000-09-21 20:01:57 +00:00
if_fxpreg.h Add the PCI device ID for the on-board ethernet controllers on the 2000-09-21 20:01:57 +00:00
if_fxpvar.h Removed NetBSD support, which bit-rotted long ago. 2000-09-18 21:12:19 +00:00
if_mn.c Register resources in a more opportune order for the hardware. 2000-09-05 21:08:48 +00:00
if_pcn.c Make pcn_miibus_readreg() latch onto the first PHY that it finds (as 2000-09-22 03:49:12 +00:00
if_pcnreg.h Make pcn_miibus_readreg() latch onto the first PHY that it finds (as 2000-09-22 03:49:12 +00:00
if_rl.c
if_rlreg.h
if_sf.c
if_sfreg.h
if_sis.c
if_sisreg.h
if_sk.c
if_skreg.h
if_sr_p.c
if_ste.c
if_stereg.h
if_ti.c * Completely rewrite the alpha busspace to hide the implementation from 2000-08-28 21:48:13 +00:00
if_tireg.h
if_tl.c
if_tlreg.h
if_tx.c
if_txvar.h
if_vr.c
if_vrreg.h
if_wb.c
if_wbreg.h
if_wx.c
if_wxreg.h
if_wxvar.h
if_xl.c Add support for the 3Com 556 and 556B mini-pci adapters used on some 2000-08-28 20:40:03 +00:00
if_xlreg.h Add support for the 3Com 556 and 556B mini-pci adapters used on some 2000-08-28 20:40:03 +00:00
intpm.c
intpmreg.h
isp_pci.c some copyright cleanups 2000-09-21 20:16:04 +00:00
locate.pl
meteor_reg.h
meteor.c
ncr.c
ncrreg.h
ohci_pci.c
pccbb.c
pccbbreg.h
pccbbvar.h
pci_compat.c - Remove the inthand2_t type and use the equivalent driver_intr_t type from 2000-09-13 18:33:25 +00:00
pci_if.m
pci.c When dumping the 'found devices' list in verbose mode, actually show the 2000-09-05 00:32:19 +00:00
pcib_if.m * Completely rewrite the alpha busspace to hide the implementation from 2000-08-28 21:48:13 +00:00
pcic_p.c Add a detach method to allow this device to be unloaded. 2000-08-30 06:57:38 +00:00
pcic_p.h Add TI-1031 id. It doesn't work yet, but it is nice to have it. 2000-08-29 04:40:17 +00:00
pcireg.h Add PCIM_CMD_MWRICEN, the bit in the command register in PCI space 2000-09-16 20:06:13 +00:00
pcisupport.c Clean up the VIA id's a bit and add the K[TX]133 chipsets 2000-09-20 07:05:44 +00:00
pcivar.h * Completely rewrite the alpha busspace to hide the implementation from 2000-08-28 21:48:13 +00:00
scsiiom.c
simos.c
simos.h
ti_fw2.h
ti_fw.h
uhci_pci.c
xmaciireg.h
xrpu.c