e3737c33e7
features. The changes in particular are: o Remove rarely used "header" pointer and replace it with a 64bit protocol/ layer specific union PH_loc for local use. Protocols can flexibly overlay their own 8 to 64 bit fields to store information while the packet is worked on. o Mechanically convert IP reassembly, IGMP/MLD and ATM to use pkthdr.PH_loc instead of pkthdr.header. o Extend csum_flags to 64bits to allow for additional future offload information to be carried (e.g. iSCSI, IPsec offload, and others). o Move the RSS hash type enumerator from abusing m_flags to its own 8bit rsstype field. Adjust accessor macros. o Add cosqos field to store Class of Service / Quality of Service information with the packet. It is not yet supported in any drivers but allows us to get on par with Cisco/Juniper in routing applications (plus MPLS QoS) with a modernized ALTQ. o Add four 8 bit fields l[2-5]hlen to store the relative header offsets from the start of the packet. This is important for various offload capabilities and to relieve the drivers from having to parse the packet and protocol headers to find out location of checksums and other information. Header parsing in drivers is a lot of copy-paste and unhandled corner cases which we want to avoid. o Add another flexible 64bit union to map various additional persistent packet information, like ether_vtag, tso_segsz and csum fields. Depending on the csum_flags settings some fields may have different usage making it very flexible and adaptable to future capabilities. o Restructure the CSUM flags to better signify their outbound (down the stack) and inbound (up the stack) use. The CSUM flags used to be a bit chaotic and rather poorly documented leading to incorrect use in many places. Bring clarity into their use through better naming. Compatibility mappings are provided to preserve the API. The drivers can be corrected one by one and MFC'd without issue. o The size of pkthdr stays the same at 48/56bytes (32/64bit architectures). Sponsored by: The FreeBSD Foundation
4008 lines
107 KiB
C
4008 lines
107 KiB
C
/******************************************************************************
|
|
|
|
Copyright (c) 2001-2013, Intel Corporation
|
|
All rights reserved.
|
|
|
|
Redistribution and use in source and binary forms, with or without
|
|
modification, are permitted provided that the following conditions are met:
|
|
|
|
1. Redistributions of source code must retain the above copyright notice,
|
|
this list of conditions and the following disclaimer.
|
|
|
|
2. Redistributions in binary form must reproduce the above copyright
|
|
notice, this list of conditions and the following disclaimer in the
|
|
documentation and/or other materials provided with the distribution.
|
|
|
|
3. Neither the name of the Intel Corporation nor the names of its
|
|
contributors may be used to endorse or promote products derived from
|
|
this software without specific prior written permission.
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
|
|
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
******************************************************************************/
|
|
/*$FreeBSD$*/
|
|
|
|
#include "opt_inet.h"
|
|
#include "opt_inet6.h"
|
|
#include "ixv.h"
|
|
|
|
/*********************************************************************
|
|
* Driver version
|
|
*********************************************************************/
|
|
char ixv_driver_version[] = "1.1.4";
|
|
|
|
/*********************************************************************
|
|
* PCI Device ID Table
|
|
*
|
|
* Used by probe to select devices to load on
|
|
* Last field stores an index into ixv_strings
|
|
* Last entry must be all 0s
|
|
*
|
|
* { Vendor ID, Device ID, SubVendor ID, SubDevice ID, String Index }
|
|
*********************************************************************/
|
|
|
|
static ixv_vendor_info_t ixv_vendor_info_array[] =
|
|
{
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599_VF, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X540_VF, 0, 0, 0},
|
|
/* required last entry */
|
|
{0, 0, 0, 0, 0}
|
|
};
|
|
|
|
/*********************************************************************
|
|
* Table of branding strings
|
|
*********************************************************************/
|
|
|
|
static char *ixv_strings[] = {
|
|
"Intel(R) PRO/10GbE Virtual Function Network Driver"
|
|
};
|
|
|
|
/*********************************************************************
|
|
* Function prototypes
|
|
*********************************************************************/
|
|
static int ixv_probe(device_t);
|
|
static int ixv_attach(device_t);
|
|
static int ixv_detach(device_t);
|
|
static int ixv_shutdown(device_t);
|
|
#if __FreeBSD_version < 800000
|
|
static void ixv_start(struct ifnet *);
|
|
static void ixv_start_locked(struct tx_ring *, struct ifnet *);
|
|
#else
|
|
static int ixv_mq_start(struct ifnet *, struct mbuf *);
|
|
static int ixv_mq_start_locked(struct ifnet *,
|
|
struct tx_ring *, struct mbuf *);
|
|
static void ixv_qflush(struct ifnet *);
|
|
#endif
|
|
static int ixv_ioctl(struct ifnet *, u_long, caddr_t);
|
|
static void ixv_init(void *);
|
|
static void ixv_init_locked(struct adapter *);
|
|
static void ixv_stop(void *);
|
|
static void ixv_media_status(struct ifnet *, struct ifmediareq *);
|
|
static int ixv_media_change(struct ifnet *);
|
|
static void ixv_identify_hardware(struct adapter *);
|
|
static int ixv_allocate_pci_resources(struct adapter *);
|
|
static int ixv_allocate_msix(struct adapter *);
|
|
static int ixv_allocate_queues(struct adapter *);
|
|
static int ixv_setup_msix(struct adapter *);
|
|
static void ixv_free_pci_resources(struct adapter *);
|
|
static void ixv_local_timer(void *);
|
|
static void ixv_setup_interface(device_t, struct adapter *);
|
|
static void ixv_config_link(struct adapter *);
|
|
|
|
static int ixv_allocate_transmit_buffers(struct tx_ring *);
|
|
static int ixv_setup_transmit_structures(struct adapter *);
|
|
static void ixv_setup_transmit_ring(struct tx_ring *);
|
|
static void ixv_initialize_transmit_units(struct adapter *);
|
|
static void ixv_free_transmit_structures(struct adapter *);
|
|
static void ixv_free_transmit_buffers(struct tx_ring *);
|
|
|
|
static int ixv_allocate_receive_buffers(struct rx_ring *);
|
|
static int ixv_setup_receive_structures(struct adapter *);
|
|
static int ixv_setup_receive_ring(struct rx_ring *);
|
|
static void ixv_initialize_receive_units(struct adapter *);
|
|
static void ixv_free_receive_structures(struct adapter *);
|
|
static void ixv_free_receive_buffers(struct rx_ring *);
|
|
|
|
static void ixv_enable_intr(struct adapter *);
|
|
static void ixv_disable_intr(struct adapter *);
|
|
static bool ixv_txeof(struct tx_ring *);
|
|
static bool ixv_rxeof(struct ix_queue *, int);
|
|
static void ixv_rx_checksum(u32, struct mbuf *, u32);
|
|
static void ixv_set_multi(struct adapter *);
|
|
static void ixv_update_link_status(struct adapter *);
|
|
static void ixv_refresh_mbufs(struct rx_ring *, int);
|
|
static int ixv_xmit(struct tx_ring *, struct mbuf **);
|
|
static int ixv_sysctl_stats(SYSCTL_HANDLER_ARGS);
|
|
static int ixv_sysctl_debug(SYSCTL_HANDLER_ARGS);
|
|
static int ixv_set_flowcntl(SYSCTL_HANDLER_ARGS);
|
|
static int ixv_dma_malloc(struct adapter *, bus_size_t,
|
|
struct ixv_dma_alloc *, int);
|
|
static void ixv_dma_free(struct adapter *, struct ixv_dma_alloc *);
|
|
static void ixv_add_rx_process_limit(struct adapter *, const char *,
|
|
const char *, int *, int);
|
|
static bool ixv_tx_ctx_setup(struct tx_ring *, struct mbuf *);
|
|
static bool ixv_tso_setup(struct tx_ring *, struct mbuf *, u32 *);
|
|
static void ixv_set_ivar(struct adapter *, u8, u8, s8);
|
|
static void ixv_configure_ivars(struct adapter *);
|
|
static u8 * ixv_mc_array_itr(struct ixgbe_hw *, u8 **, u32 *);
|
|
|
|
static void ixv_setup_vlan_support(struct adapter *);
|
|
static void ixv_register_vlan(void *, struct ifnet *, u16);
|
|
static void ixv_unregister_vlan(void *, struct ifnet *, u16);
|
|
|
|
static void ixv_save_stats(struct adapter *);
|
|
static void ixv_init_stats(struct adapter *);
|
|
static void ixv_update_stats(struct adapter *);
|
|
|
|
static __inline void ixv_rx_discard(struct rx_ring *, int);
|
|
static __inline void ixv_rx_input(struct rx_ring *, struct ifnet *,
|
|
struct mbuf *, u32);
|
|
|
|
/* The MSI/X Interrupt handlers */
|
|
static void ixv_msix_que(void *);
|
|
static void ixv_msix_mbx(void *);
|
|
|
|
/* Deferred interrupt tasklets */
|
|
static void ixv_handle_que(void *, int);
|
|
static void ixv_handle_mbx(void *, int);
|
|
|
|
/*********************************************************************
|
|
* FreeBSD Device Interface Entry Points
|
|
*********************************************************************/
|
|
|
|
static device_method_t ixv_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, ixv_probe),
|
|
DEVMETHOD(device_attach, ixv_attach),
|
|
DEVMETHOD(device_detach, ixv_detach),
|
|
DEVMETHOD(device_shutdown, ixv_shutdown),
|
|
DEVMETHOD_END
|
|
};
|
|
|
|
static driver_t ixv_driver = {
|
|
"ix", ixv_methods, sizeof(struct adapter),
|
|
};
|
|
|
|
extern devclass_t ixgbe_devclass;
|
|
DRIVER_MODULE(ixv, pci, ixv_driver, ixgbe_devclass, 0, 0);
|
|
MODULE_DEPEND(ixv, pci, 1, 1, 1);
|
|
MODULE_DEPEND(ixv, ether, 1, 1, 1);
|
|
|
|
/*
|
|
** TUNEABLE PARAMETERS:
|
|
*/
|
|
|
|
/*
|
|
** AIM: Adaptive Interrupt Moderation
|
|
** which means that the interrupt rate
|
|
** is varied over time based on the
|
|
** traffic for that interrupt vector
|
|
*/
|
|
static int ixv_enable_aim = FALSE;
|
|
TUNABLE_INT("hw.ixv.enable_aim", &ixv_enable_aim);
|
|
|
|
/* How many packets rxeof tries to clean at a time */
|
|
static int ixv_rx_process_limit = 128;
|
|
TUNABLE_INT("hw.ixv.rx_process_limit", &ixv_rx_process_limit);
|
|
|
|
/* Flow control setting, default to full */
|
|
static int ixv_flow_control = ixgbe_fc_full;
|
|
TUNABLE_INT("hw.ixv.flow_control", &ixv_flow_control);
|
|
|
|
/*
|
|
* Header split: this causes the hardware to DMA
|
|
* the header into a seperate mbuf from the payload,
|
|
* it can be a performance win in some workloads, but
|
|
* in others it actually hurts, its off by default.
|
|
*/
|
|
static int ixv_header_split = FALSE;
|
|
TUNABLE_INT("hw.ixv.hdr_split", &ixv_header_split);
|
|
|
|
/*
|
|
** Number of TX descriptors per ring,
|
|
** setting higher than RX as this seems
|
|
** the better performing choice.
|
|
*/
|
|
static int ixv_txd = DEFAULT_TXD;
|
|
TUNABLE_INT("hw.ixv.txd", &ixv_txd);
|
|
|
|
/* Number of RX descriptors per ring */
|
|
static int ixv_rxd = DEFAULT_RXD;
|
|
TUNABLE_INT("hw.ixv.rxd", &ixv_rxd);
|
|
|
|
/*
|
|
** Shadow VFTA table, this is needed because
|
|
** the real filter table gets cleared during
|
|
** a soft reset and we need to repopulate it.
|
|
*/
|
|
static u32 ixv_shadow_vfta[VFTA_SIZE];
|
|
|
|
/*********************************************************************
|
|
* Device identification routine
|
|
*
|
|
* ixv_probe determines if the driver should be loaded on
|
|
* adapter based on PCI vendor/device id of the adapter.
|
|
*
|
|
* return BUS_PROBE_DEFAULT on success, positive on failure
|
|
*********************************************************************/
|
|
|
|
static int
|
|
ixv_probe(device_t dev)
|
|
{
|
|
ixv_vendor_info_t *ent;
|
|
|
|
u16 pci_vendor_id = 0;
|
|
u16 pci_device_id = 0;
|
|
u16 pci_subvendor_id = 0;
|
|
u16 pci_subdevice_id = 0;
|
|
char adapter_name[256];
|
|
|
|
|
|
pci_vendor_id = pci_get_vendor(dev);
|
|
if (pci_vendor_id != IXGBE_INTEL_VENDOR_ID)
|
|
return (ENXIO);
|
|
|
|
pci_device_id = pci_get_device(dev);
|
|
pci_subvendor_id = pci_get_subvendor(dev);
|
|
pci_subdevice_id = pci_get_subdevice(dev);
|
|
|
|
ent = ixv_vendor_info_array;
|
|
while (ent->vendor_id != 0) {
|
|
if ((pci_vendor_id == ent->vendor_id) &&
|
|
(pci_device_id == ent->device_id) &&
|
|
|
|
((pci_subvendor_id == ent->subvendor_id) ||
|
|
(ent->subvendor_id == 0)) &&
|
|
|
|
((pci_subdevice_id == ent->subdevice_id) ||
|
|
(ent->subdevice_id == 0))) {
|
|
sprintf(adapter_name, "%s, Version - %s",
|
|
ixv_strings[ent->index],
|
|
ixv_driver_version);
|
|
device_set_desc_copy(dev, adapter_name);
|
|
return (BUS_PROBE_DEFAULT);
|
|
}
|
|
ent++;
|
|
}
|
|
return (ENXIO);
|
|
}
|
|
|
|
/*********************************************************************
|
|
* Device initialization routine
|
|
*
|
|
* The attach entry point is called when the driver is being loaded.
|
|
* This routine identifies the type of hardware, allocates all resources
|
|
* and initializes the hardware.
|
|
*
|
|
* return 0 on success, positive on failure
|
|
*********************************************************************/
|
|
|
|
static int
|
|
ixv_attach(device_t dev)
|
|
{
|
|
struct adapter *adapter;
|
|
struct ixgbe_hw *hw;
|
|
int error = 0;
|
|
|
|
INIT_DEBUGOUT("ixv_attach: begin");
|
|
|
|
/* Allocate, clear, and link in our adapter structure */
|
|
adapter = device_get_softc(dev);
|
|
adapter->dev = adapter->osdep.dev = dev;
|
|
hw = &adapter->hw;
|
|
|
|
/* Core Lock Init*/
|
|
IXV_CORE_LOCK_INIT(adapter, device_get_nameunit(dev));
|
|
|
|
/* SYSCTL APIs */
|
|
SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev),
|
|
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
|
|
OID_AUTO, "stats", CTLTYPE_INT | CTLFLAG_RW,
|
|
adapter, 0, ixv_sysctl_stats, "I", "Statistics");
|
|
|
|
SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev),
|
|
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
|
|
OID_AUTO, "debug", CTLTYPE_INT | CTLFLAG_RW,
|
|
adapter, 0, ixv_sysctl_debug, "I", "Debug Info");
|
|
|
|
SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev),
|
|
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
|
|
OID_AUTO, "flow_control", CTLTYPE_INT | CTLFLAG_RW,
|
|
adapter, 0, ixv_set_flowcntl, "I", "Flow Control");
|
|
|
|
SYSCTL_ADD_INT(device_get_sysctl_ctx(dev),
|
|
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
|
|
OID_AUTO, "enable_aim", CTLTYPE_INT|CTLFLAG_RW,
|
|
&ixv_enable_aim, 1, "Interrupt Moderation");
|
|
|
|
/* Set up the timer callout */
|
|
callout_init_mtx(&adapter->timer, &adapter->core_mtx, 0);
|
|
|
|
/* Determine hardware revision */
|
|
ixv_identify_hardware(adapter);
|
|
|
|
/* Do base PCI setup - map BAR0 */
|
|
if (ixv_allocate_pci_resources(adapter)) {
|
|
device_printf(dev, "Allocation of PCI resources failed\n");
|
|
error = ENXIO;
|
|
goto err_out;
|
|
}
|
|
|
|
/* Do descriptor calc and sanity checks */
|
|
if (((ixv_txd * sizeof(union ixgbe_adv_tx_desc)) % DBA_ALIGN) != 0 ||
|
|
ixv_txd < MIN_TXD || ixv_txd > MAX_TXD) {
|
|
device_printf(dev, "TXD config issue, using default!\n");
|
|
adapter->num_tx_desc = DEFAULT_TXD;
|
|
} else
|
|
adapter->num_tx_desc = ixv_txd;
|
|
|
|
if (((ixv_rxd * sizeof(union ixgbe_adv_rx_desc)) % DBA_ALIGN) != 0 ||
|
|
ixv_rxd < MIN_TXD || ixv_rxd > MAX_TXD) {
|
|
device_printf(dev, "RXD config issue, using default!\n");
|
|
adapter->num_rx_desc = DEFAULT_RXD;
|
|
} else
|
|
adapter->num_rx_desc = ixv_rxd;
|
|
|
|
/* Allocate our TX/RX Queues */
|
|
if (ixv_allocate_queues(adapter)) {
|
|
error = ENOMEM;
|
|
goto err_out;
|
|
}
|
|
|
|
/*
|
|
** Initialize the shared code: its
|
|
** at this point the mac type is set.
|
|
*/
|
|
error = ixgbe_init_shared_code(hw);
|
|
if (error) {
|
|
device_printf(dev,"Shared Code Initialization Failure\n");
|
|
error = EIO;
|
|
goto err_late;
|
|
}
|
|
|
|
/* Setup the mailbox */
|
|
ixgbe_init_mbx_params_vf(hw);
|
|
|
|
ixgbe_reset_hw(hw);
|
|
|
|
/* Get Hardware Flow Control setting */
|
|
hw->fc.requested_mode = ixgbe_fc_full;
|
|
hw->fc.pause_time = IXV_FC_PAUSE;
|
|
hw->fc.low_water[0] = IXV_FC_LO;
|
|
hw->fc.high_water[0] = IXV_FC_HI;
|
|
hw->fc.send_xon = TRUE;
|
|
|
|
error = ixgbe_init_hw(hw);
|
|
if (error) {
|
|
device_printf(dev,"Hardware Initialization Failure\n");
|
|
error = EIO;
|
|
goto err_late;
|
|
}
|
|
|
|
error = ixv_allocate_msix(adapter);
|
|
if (error)
|
|
goto err_late;
|
|
|
|
/* Setup OS specific network interface */
|
|
ixv_setup_interface(dev, adapter);
|
|
|
|
/* Sysctl for limiting the amount of work done in the taskqueue */
|
|
ixv_add_rx_process_limit(adapter, "rx_processing_limit",
|
|
"max number of rx packets to process", &adapter->rx_process_limit,
|
|
ixv_rx_process_limit);
|
|
|
|
/* Do the stats setup */
|
|
ixv_save_stats(adapter);
|
|
ixv_init_stats(adapter);
|
|
|
|
/* Register for VLAN events */
|
|
adapter->vlan_attach = EVENTHANDLER_REGISTER(vlan_config,
|
|
ixv_register_vlan, adapter, EVENTHANDLER_PRI_FIRST);
|
|
adapter->vlan_detach = EVENTHANDLER_REGISTER(vlan_unconfig,
|
|
ixv_unregister_vlan, adapter, EVENTHANDLER_PRI_FIRST);
|
|
|
|
INIT_DEBUGOUT("ixv_attach: end");
|
|
return (0);
|
|
|
|
err_late:
|
|
ixv_free_transmit_structures(adapter);
|
|
ixv_free_receive_structures(adapter);
|
|
err_out:
|
|
ixv_free_pci_resources(adapter);
|
|
return (error);
|
|
|
|
}
|
|
|
|
/*********************************************************************
|
|
* Device removal routine
|
|
*
|
|
* The detach entry point is called when the driver is being removed.
|
|
* This routine stops the adapter and deallocates all the resources
|
|
* that were allocated for driver operation.
|
|
*
|
|
* return 0 on success, positive on failure
|
|
*********************************************************************/
|
|
|
|
static int
|
|
ixv_detach(device_t dev)
|
|
{
|
|
struct adapter *adapter = device_get_softc(dev);
|
|
struct ix_queue *que = adapter->queues;
|
|
|
|
INIT_DEBUGOUT("ixv_detach: begin");
|
|
|
|
/* Make sure VLANS are not using driver */
|
|
if (adapter->ifp->if_vlantrunk != NULL) {
|
|
device_printf(dev,"Vlan in use, detach first\n");
|
|
return (EBUSY);
|
|
}
|
|
|
|
IXV_CORE_LOCK(adapter);
|
|
ixv_stop(adapter);
|
|
IXV_CORE_UNLOCK(adapter);
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++, que++) {
|
|
if (que->tq) {
|
|
taskqueue_drain(que->tq, &que->que_task);
|
|
taskqueue_free(que->tq);
|
|
}
|
|
}
|
|
|
|
/* Drain the Link queue */
|
|
if (adapter->tq) {
|
|
taskqueue_drain(adapter->tq, &adapter->mbx_task);
|
|
taskqueue_free(adapter->tq);
|
|
}
|
|
|
|
/* Unregister VLAN events */
|
|
if (adapter->vlan_attach != NULL)
|
|
EVENTHANDLER_DEREGISTER(vlan_config, adapter->vlan_attach);
|
|
if (adapter->vlan_detach != NULL)
|
|
EVENTHANDLER_DEREGISTER(vlan_unconfig, adapter->vlan_detach);
|
|
|
|
ether_ifdetach(adapter->ifp);
|
|
callout_drain(&adapter->timer);
|
|
ixv_free_pci_resources(adapter);
|
|
bus_generic_detach(dev);
|
|
if_free(adapter->ifp);
|
|
|
|
ixv_free_transmit_structures(adapter);
|
|
ixv_free_receive_structures(adapter);
|
|
|
|
IXV_CORE_LOCK_DESTROY(adapter);
|
|
return (0);
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Shutdown entry point
|
|
*
|
|
**********************************************************************/
|
|
static int
|
|
ixv_shutdown(device_t dev)
|
|
{
|
|
struct adapter *adapter = device_get_softc(dev);
|
|
IXV_CORE_LOCK(adapter);
|
|
ixv_stop(adapter);
|
|
IXV_CORE_UNLOCK(adapter);
|
|
return (0);
|
|
}
|
|
|
|
#if __FreeBSD_version < 800000
|
|
/*********************************************************************
|
|
* Transmit entry point
|
|
*
|
|
* ixv_start is called by the stack to initiate a transmit.
|
|
* The driver will remain in this routine as long as there are
|
|
* packets to transmit and transmit resources are available.
|
|
* In case resources are not available stack is notified and
|
|
* the packet is requeued.
|
|
**********************************************************************/
|
|
static void
|
|
ixv_start_locked(struct tx_ring *txr, struct ifnet * ifp)
|
|
{
|
|
struct mbuf *m_head;
|
|
struct adapter *adapter = txr->adapter;
|
|
|
|
IXV_TX_LOCK_ASSERT(txr);
|
|
|
|
if ((ifp->if_drv_flags & (IFF_DRV_RUNNING|IFF_DRV_OACTIVE)) !=
|
|
IFF_DRV_RUNNING)
|
|
return;
|
|
if (!adapter->link_active)
|
|
return;
|
|
|
|
while (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) {
|
|
|
|
IFQ_DRV_DEQUEUE(&ifp->if_snd, m_head);
|
|
if (m_head == NULL)
|
|
break;
|
|
|
|
if (ixv_xmit(txr, &m_head)) {
|
|
if (m_head == NULL)
|
|
break;
|
|
ifp->if_drv_flags |= IFF_DRV_OACTIVE;
|
|
IFQ_DRV_PREPEND(&ifp->if_snd, m_head);
|
|
break;
|
|
}
|
|
/* Send a copy of the frame to the BPF listener */
|
|
ETHER_BPF_MTAP(ifp, m_head);
|
|
|
|
/* Set watchdog on */
|
|
txr->watchdog_check = TRUE;
|
|
txr->watchdog_time = ticks;
|
|
|
|
}
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Legacy TX start - called by the stack, this
|
|
* always uses the first tx ring, and should
|
|
* not be used with multiqueue tx enabled.
|
|
*/
|
|
static void
|
|
ixv_start(struct ifnet *ifp)
|
|
{
|
|
struct adapter *adapter = ifp->if_softc;
|
|
struct tx_ring *txr = adapter->tx_rings;
|
|
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
|
|
IXV_TX_LOCK(txr);
|
|
ixv_start_locked(txr, ifp);
|
|
IXV_TX_UNLOCK(txr);
|
|
}
|
|
return;
|
|
}
|
|
|
|
#else
|
|
|
|
/*
|
|
** Multiqueue Transmit driver
|
|
**
|
|
*/
|
|
static int
|
|
ixv_mq_start(struct ifnet *ifp, struct mbuf *m)
|
|
{
|
|
struct adapter *adapter = ifp->if_softc;
|
|
struct ix_queue *que;
|
|
struct tx_ring *txr;
|
|
int i = 0, err = 0;
|
|
|
|
/* Which queue to use */
|
|
if ((m->m_flags & M_FLOWID) != 0)
|
|
i = m->m_pkthdr.flowid % adapter->num_queues;
|
|
|
|
txr = &adapter->tx_rings[i];
|
|
que = &adapter->queues[i];
|
|
|
|
if (IXV_TX_TRYLOCK(txr)) {
|
|
err = ixv_mq_start_locked(ifp, txr, m);
|
|
IXV_TX_UNLOCK(txr);
|
|
} else {
|
|
err = drbr_enqueue(ifp, txr->br, m);
|
|
taskqueue_enqueue(que->tq, &que->que_task);
|
|
}
|
|
|
|
return (err);
|
|
}
|
|
|
|
static int
|
|
ixv_mq_start_locked(struct ifnet *ifp, struct tx_ring *txr, struct mbuf *m)
|
|
{
|
|
struct adapter *adapter = txr->adapter;
|
|
struct mbuf *next;
|
|
int enqueued, err = 0;
|
|
|
|
if ((ifp->if_drv_flags & (IFF_DRV_RUNNING | IFF_DRV_OACTIVE)) !=
|
|
IFF_DRV_RUNNING || adapter->link_active == 0) {
|
|
if (m != NULL)
|
|
err = drbr_enqueue(ifp, txr->br, m);
|
|
return (err);
|
|
}
|
|
|
|
/* Do a clean if descriptors are low */
|
|
if (txr->tx_avail <= IXV_TX_CLEANUP_THRESHOLD)
|
|
ixv_txeof(txr);
|
|
|
|
enqueued = 0;
|
|
if (m != NULL) {
|
|
err = drbr_enqueue(ifp, txr->br, m);
|
|
if (err) {
|
|
return (err);
|
|
}
|
|
}
|
|
/* Process the queue */
|
|
while ((next = drbr_peek(ifp, txr->br)) != NULL) {
|
|
if ((err = ixv_xmit(txr, &next)) != 0) {
|
|
if (next == NULL) {
|
|
drbr_advance(ifp, txr->br);
|
|
} else {
|
|
drbr_putback(ifp, txr->br, next);
|
|
}
|
|
break;
|
|
}
|
|
drbr_advance(ifp, txr->br);
|
|
enqueued++;
|
|
ifp->if_obytes += next->m_pkthdr.len;
|
|
if (next->m_flags & M_MCAST)
|
|
ifp->if_omcasts++;
|
|
/* Send a copy of the frame to the BPF listener */
|
|
ETHER_BPF_MTAP(ifp, next);
|
|
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0)
|
|
break;
|
|
if (txr->tx_avail <= IXV_TX_OP_THRESHOLD) {
|
|
ifp->if_drv_flags |= IFF_DRV_OACTIVE;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (enqueued > 0) {
|
|
/* Set watchdog on */
|
|
txr->watchdog_check = TRUE;
|
|
txr->watchdog_time = ticks;
|
|
}
|
|
|
|
return (err);
|
|
}
|
|
|
|
/*
|
|
** Flush all ring buffers
|
|
*/
|
|
static void
|
|
ixv_qflush(struct ifnet *ifp)
|
|
{
|
|
struct adapter *adapter = ifp->if_softc;
|
|
struct tx_ring *txr = adapter->tx_rings;
|
|
struct mbuf *m;
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++, txr++) {
|
|
IXV_TX_LOCK(txr);
|
|
while ((m = buf_ring_dequeue_sc(txr->br)) != NULL)
|
|
m_freem(m);
|
|
IXV_TX_UNLOCK(txr);
|
|
}
|
|
if_qflush(ifp);
|
|
}
|
|
|
|
#endif
|
|
|
|
/*********************************************************************
|
|
* Ioctl entry point
|
|
*
|
|
* ixv_ioctl is called when the user wants to configure the
|
|
* interface.
|
|
*
|
|
* return 0 on success, positive on failure
|
|
**********************************************************************/
|
|
|
|
static int
|
|
ixv_ioctl(struct ifnet * ifp, u_long command, caddr_t data)
|
|
{
|
|
struct adapter *adapter = ifp->if_softc;
|
|
struct ifreq *ifr = (struct ifreq *) data;
|
|
#if defined(INET) || defined(INET6)
|
|
struct ifaddr *ifa = (struct ifaddr *) data;
|
|
bool avoid_reset = FALSE;
|
|
#endif
|
|
int error = 0;
|
|
|
|
switch (command) {
|
|
|
|
case SIOCSIFADDR:
|
|
#ifdef INET
|
|
if (ifa->ifa_addr->sa_family == AF_INET)
|
|
avoid_reset = TRUE;
|
|
#endif
|
|
#ifdef INET6
|
|
if (ifa->ifa_addr->sa_family == AF_INET6)
|
|
avoid_reset = TRUE;
|
|
#endif
|
|
#if defined(INET) || defined(INET6)
|
|
/*
|
|
** Calling init results in link renegotiation,
|
|
** so we avoid doing it when possible.
|
|
*/
|
|
if (avoid_reset) {
|
|
ifp->if_flags |= IFF_UP;
|
|
if (!(ifp->if_drv_flags & IFF_DRV_RUNNING))
|
|
ixv_init(adapter);
|
|
if (!(ifp->if_flags & IFF_NOARP))
|
|
arp_ifinit(ifp, ifa);
|
|
} else
|
|
error = ether_ioctl(ifp, command, data);
|
|
break;
|
|
#endif
|
|
case SIOCSIFMTU:
|
|
IOCTL_DEBUGOUT("ioctl: SIOCSIFMTU (Set Interface MTU)");
|
|
if (ifr->ifr_mtu > IXV_MAX_FRAME_SIZE - ETHER_HDR_LEN) {
|
|
error = EINVAL;
|
|
} else {
|
|
IXV_CORE_LOCK(adapter);
|
|
ifp->if_mtu = ifr->ifr_mtu;
|
|
adapter->max_frame_size =
|
|
ifp->if_mtu + ETHER_HDR_LEN + ETHER_CRC_LEN;
|
|
ixv_init_locked(adapter);
|
|
IXV_CORE_UNLOCK(adapter);
|
|
}
|
|
break;
|
|
case SIOCSIFFLAGS:
|
|
IOCTL_DEBUGOUT("ioctl: SIOCSIFFLAGS (Set Interface Flags)");
|
|
IXV_CORE_LOCK(adapter);
|
|
if (ifp->if_flags & IFF_UP) {
|
|
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0)
|
|
ixv_init_locked(adapter);
|
|
} else
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING)
|
|
ixv_stop(adapter);
|
|
adapter->if_flags = ifp->if_flags;
|
|
IXV_CORE_UNLOCK(adapter);
|
|
break;
|
|
case SIOCADDMULTI:
|
|
case SIOCDELMULTI:
|
|
IOCTL_DEBUGOUT("ioctl: SIOC(ADD|DEL)MULTI");
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
|
|
IXV_CORE_LOCK(adapter);
|
|
ixv_disable_intr(adapter);
|
|
ixv_set_multi(adapter);
|
|
ixv_enable_intr(adapter);
|
|
IXV_CORE_UNLOCK(adapter);
|
|
}
|
|
break;
|
|
case SIOCSIFMEDIA:
|
|
case SIOCGIFMEDIA:
|
|
IOCTL_DEBUGOUT("ioctl: SIOCxIFMEDIA (Get/Set Interface Media)");
|
|
error = ifmedia_ioctl(ifp, ifr, &adapter->media, command);
|
|
break;
|
|
case SIOCSIFCAP:
|
|
{
|
|
int mask = ifr->ifr_reqcap ^ ifp->if_capenable;
|
|
IOCTL_DEBUGOUT("ioctl: SIOCSIFCAP (Set Capabilities)");
|
|
if (mask & IFCAP_HWCSUM)
|
|
ifp->if_capenable ^= IFCAP_HWCSUM;
|
|
if (mask & IFCAP_TSO4)
|
|
ifp->if_capenable ^= IFCAP_TSO4;
|
|
if (mask & IFCAP_LRO)
|
|
ifp->if_capenable ^= IFCAP_LRO;
|
|
if (mask & IFCAP_VLAN_HWTAGGING)
|
|
ifp->if_capenable ^= IFCAP_VLAN_HWTAGGING;
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
|
|
IXV_CORE_LOCK(adapter);
|
|
ixv_init_locked(adapter);
|
|
IXV_CORE_UNLOCK(adapter);
|
|
}
|
|
VLAN_CAPABILITIES(ifp);
|
|
break;
|
|
}
|
|
|
|
default:
|
|
IOCTL_DEBUGOUT1("ioctl: UNKNOWN (0x%X)\n", (int)command);
|
|
error = ether_ioctl(ifp, command, data);
|
|
break;
|
|
}
|
|
|
|
return (error);
|
|
}
|
|
|
|
/*********************************************************************
|
|
* Init entry point
|
|
*
|
|
* This routine is used in two ways. It is used by the stack as
|
|
* init entry point in network interface structure. It is also used
|
|
* by the driver as a hw/sw initialization routine to get to a
|
|
* consistent state.
|
|
*
|
|
* return 0 on success, positive on failure
|
|
**********************************************************************/
|
|
#define IXGBE_MHADD_MFS_SHIFT 16
|
|
|
|
static void
|
|
ixv_init_locked(struct adapter *adapter)
|
|
{
|
|
struct ifnet *ifp = adapter->ifp;
|
|
device_t dev = adapter->dev;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u32 mhadd, gpie;
|
|
|
|
INIT_DEBUGOUT("ixv_init: begin");
|
|
mtx_assert(&adapter->core_mtx, MA_OWNED);
|
|
hw->adapter_stopped = FALSE;
|
|
ixgbe_stop_adapter(hw);
|
|
callout_stop(&adapter->timer);
|
|
|
|
/* reprogram the RAR[0] in case user changed it. */
|
|
ixgbe_set_rar(hw, 0, hw->mac.addr, 0, IXGBE_RAH_AV);
|
|
|
|
/* Get the latest mac address, User can use a LAA */
|
|
bcopy(IF_LLADDR(adapter->ifp), hw->mac.addr,
|
|
IXGBE_ETH_LENGTH_OF_ADDRESS);
|
|
ixgbe_set_rar(hw, 0, hw->mac.addr, 0, 1);
|
|
hw->addr_ctrl.rar_used_count = 1;
|
|
|
|
/* Prepare transmit descriptors and buffers */
|
|
if (ixv_setup_transmit_structures(adapter)) {
|
|
device_printf(dev,"Could not setup transmit structures\n");
|
|
ixv_stop(adapter);
|
|
return;
|
|
}
|
|
|
|
ixgbe_reset_hw(hw);
|
|
ixv_initialize_transmit_units(adapter);
|
|
|
|
/* Setup Multicast table */
|
|
ixv_set_multi(adapter);
|
|
|
|
/*
|
|
** Determine the correct mbuf pool
|
|
** for doing jumbo/headersplit
|
|
*/
|
|
if (ifp->if_mtu > ETHERMTU)
|
|
adapter->rx_mbuf_sz = MJUMPAGESIZE;
|
|
else
|
|
adapter->rx_mbuf_sz = MCLBYTES;
|
|
|
|
/* Prepare receive descriptors and buffers */
|
|
if (ixv_setup_receive_structures(adapter)) {
|
|
device_printf(dev,"Could not setup receive structures\n");
|
|
ixv_stop(adapter);
|
|
return;
|
|
}
|
|
|
|
/* Configure RX settings */
|
|
ixv_initialize_receive_units(adapter);
|
|
|
|
/* Enable Enhanced MSIX mode */
|
|
gpie = IXGBE_READ_REG(&adapter->hw, IXGBE_GPIE);
|
|
gpie |= IXGBE_GPIE_MSIX_MODE | IXGBE_GPIE_EIAME;
|
|
gpie |= IXGBE_GPIE_PBA_SUPPORT | IXGBE_GPIE_OCD;
|
|
IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie);
|
|
|
|
/* Set the various hardware offload abilities */
|
|
ifp->if_hwassist = 0;
|
|
if (ifp->if_capenable & IFCAP_TSO4)
|
|
ifp->if_hwassist |= CSUM_TSO;
|
|
if (ifp->if_capenable & IFCAP_TXCSUM) {
|
|
ifp->if_hwassist |= (CSUM_TCP | CSUM_UDP);
|
|
#if __FreeBSD_version >= 800000
|
|
ifp->if_hwassist |= CSUM_SCTP;
|
|
#endif
|
|
}
|
|
|
|
/* Set MTU size */
|
|
if (ifp->if_mtu > ETHERMTU) {
|
|
mhadd = IXGBE_READ_REG(hw, IXGBE_MHADD);
|
|
mhadd &= ~IXGBE_MHADD_MFS_MASK;
|
|
mhadd |= adapter->max_frame_size << IXGBE_MHADD_MFS_SHIFT;
|
|
IXGBE_WRITE_REG(hw, IXGBE_MHADD, mhadd);
|
|
}
|
|
|
|
/* Set up VLAN offload and filter */
|
|
ixv_setup_vlan_support(adapter);
|
|
|
|
callout_reset(&adapter->timer, hz, ixv_local_timer, adapter);
|
|
|
|
/* Set up MSI/X routing */
|
|
ixv_configure_ivars(adapter);
|
|
|
|
/* Set up auto-mask */
|
|
IXGBE_WRITE_REG(hw, IXGBE_VTEIAM, IXGBE_EICS_RTX_QUEUE);
|
|
|
|
/* Set moderation on the Link interrupt */
|
|
IXGBE_WRITE_REG(hw, IXGBE_VTEITR(adapter->mbxvec), IXV_LINK_ITR);
|
|
|
|
/* Stats init */
|
|
ixv_init_stats(adapter);
|
|
|
|
/* Config/Enable Link */
|
|
ixv_config_link(adapter);
|
|
|
|
/* And now turn on interrupts */
|
|
ixv_enable_intr(adapter);
|
|
|
|
/* Now inform the stack we're ready */
|
|
ifp->if_drv_flags |= IFF_DRV_RUNNING;
|
|
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
ixv_init(void *arg)
|
|
{
|
|
struct adapter *adapter = arg;
|
|
|
|
IXV_CORE_LOCK(adapter);
|
|
ixv_init_locked(adapter);
|
|
IXV_CORE_UNLOCK(adapter);
|
|
return;
|
|
}
|
|
|
|
|
|
/*
|
|
**
|
|
** MSIX Interrupt Handlers and Tasklets
|
|
**
|
|
*/
|
|
|
|
static inline void
|
|
ixv_enable_queue(struct adapter *adapter, u32 vector)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u32 queue = 1 << vector;
|
|
u32 mask;
|
|
|
|
mask = (IXGBE_EIMS_RTX_QUEUE & queue);
|
|
IXGBE_WRITE_REG(hw, IXGBE_VTEIMS, mask);
|
|
}
|
|
|
|
static inline void
|
|
ixv_disable_queue(struct adapter *adapter, u32 vector)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u64 queue = (u64)(1 << vector);
|
|
u32 mask;
|
|
|
|
mask = (IXGBE_EIMS_RTX_QUEUE & queue);
|
|
IXGBE_WRITE_REG(hw, IXGBE_VTEIMC, mask);
|
|
}
|
|
|
|
static inline void
|
|
ixv_rearm_queues(struct adapter *adapter, u64 queues)
|
|
{
|
|
u32 mask = (IXGBE_EIMS_RTX_QUEUE & queues);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_VTEICS, mask);
|
|
}
|
|
|
|
|
|
static void
|
|
ixv_handle_que(void *context, int pending)
|
|
{
|
|
struct ix_queue *que = context;
|
|
struct adapter *adapter = que->adapter;
|
|
struct tx_ring *txr = que->txr;
|
|
struct ifnet *ifp = adapter->ifp;
|
|
bool more;
|
|
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
|
|
more = ixv_rxeof(que, adapter->rx_process_limit);
|
|
IXV_TX_LOCK(txr);
|
|
ixv_txeof(txr);
|
|
#if __FreeBSD_version >= 800000
|
|
if (!drbr_empty(ifp, txr->br))
|
|
ixv_mq_start_locked(ifp, txr, NULL);
|
|
#else
|
|
if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
|
|
ixv_start_locked(txr, ifp);
|
|
#endif
|
|
IXV_TX_UNLOCK(txr);
|
|
if (more) {
|
|
taskqueue_enqueue(que->tq, &que->que_task);
|
|
return;
|
|
}
|
|
}
|
|
|
|
/* Reenable this interrupt */
|
|
ixv_enable_queue(adapter, que->msix);
|
|
return;
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* MSI Queue Interrupt Service routine
|
|
*
|
|
**********************************************************************/
|
|
void
|
|
ixv_msix_que(void *arg)
|
|
{
|
|
struct ix_queue *que = arg;
|
|
struct adapter *adapter = que->adapter;
|
|
struct tx_ring *txr = que->txr;
|
|
struct rx_ring *rxr = que->rxr;
|
|
bool more_tx, more_rx;
|
|
u32 newitr = 0;
|
|
|
|
ixv_disable_queue(adapter, que->msix);
|
|
++que->irqs;
|
|
|
|
more_rx = ixv_rxeof(que, adapter->rx_process_limit);
|
|
|
|
IXV_TX_LOCK(txr);
|
|
more_tx = ixv_txeof(txr);
|
|
/*
|
|
** Make certain that if the stack
|
|
** has anything queued the task gets
|
|
** scheduled to handle it.
|
|
*/
|
|
#if __FreeBSD_version < 800000
|
|
if (!IFQ_DRV_IS_EMPTY(&adapter->ifp->if_snd))
|
|
#else
|
|
if (!drbr_empty(adapter->ifp, txr->br))
|
|
#endif
|
|
more_tx = 1;
|
|
IXV_TX_UNLOCK(txr);
|
|
|
|
more_rx = ixv_rxeof(que, adapter->rx_process_limit);
|
|
|
|
/* Do AIM now? */
|
|
|
|
if (ixv_enable_aim == FALSE)
|
|
goto no_calc;
|
|
/*
|
|
** Do Adaptive Interrupt Moderation:
|
|
** - Write out last calculated setting
|
|
** - Calculate based on average size over
|
|
** the last interval.
|
|
*/
|
|
if (que->eitr_setting)
|
|
IXGBE_WRITE_REG(&adapter->hw,
|
|
IXGBE_VTEITR(que->msix),
|
|
que->eitr_setting);
|
|
|
|
que->eitr_setting = 0;
|
|
|
|
/* Idle, do nothing */
|
|
if ((txr->bytes == 0) && (rxr->bytes == 0))
|
|
goto no_calc;
|
|
|
|
if ((txr->bytes) && (txr->packets))
|
|
newitr = txr->bytes/txr->packets;
|
|
if ((rxr->bytes) && (rxr->packets))
|
|
newitr = max(newitr,
|
|
(rxr->bytes / rxr->packets));
|
|
newitr += 24; /* account for hardware frame, crc */
|
|
|
|
/* set an upper boundary */
|
|
newitr = min(newitr, 3000);
|
|
|
|
/* Be nice to the mid range */
|
|
if ((newitr > 300) && (newitr < 1200))
|
|
newitr = (newitr / 3);
|
|
else
|
|
newitr = (newitr / 2);
|
|
|
|
newitr |= newitr << 16;
|
|
|
|
/* save for next interrupt */
|
|
que->eitr_setting = newitr;
|
|
|
|
/* Reset state */
|
|
txr->bytes = 0;
|
|
txr->packets = 0;
|
|
rxr->bytes = 0;
|
|
rxr->packets = 0;
|
|
|
|
no_calc:
|
|
if (more_tx || more_rx)
|
|
taskqueue_enqueue(que->tq, &que->que_task);
|
|
else /* Reenable this interrupt */
|
|
ixv_enable_queue(adapter, que->msix);
|
|
return;
|
|
}
|
|
|
|
static void
|
|
ixv_msix_mbx(void *arg)
|
|
{
|
|
struct adapter *adapter = arg;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u32 reg;
|
|
|
|
++adapter->mbx_irq;
|
|
|
|
/* First get the cause */
|
|
reg = IXGBE_READ_REG(hw, IXGBE_VTEICS);
|
|
/* Clear interrupt with write */
|
|
IXGBE_WRITE_REG(hw, IXGBE_VTEICR, reg);
|
|
|
|
/* Link status change */
|
|
if (reg & IXGBE_EICR_LSC)
|
|
taskqueue_enqueue(adapter->tq, &adapter->mbx_task);
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_VTEIMS, IXGBE_EIMS_OTHER);
|
|
return;
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Media Ioctl callback
|
|
*
|
|
* This routine is called whenever the user queries the status of
|
|
* the interface using ifconfig.
|
|
*
|
|
**********************************************************************/
|
|
static void
|
|
ixv_media_status(struct ifnet * ifp, struct ifmediareq * ifmr)
|
|
{
|
|
struct adapter *adapter = ifp->if_softc;
|
|
|
|
INIT_DEBUGOUT("ixv_media_status: begin");
|
|
IXV_CORE_LOCK(adapter);
|
|
ixv_update_link_status(adapter);
|
|
|
|
ifmr->ifm_status = IFM_AVALID;
|
|
ifmr->ifm_active = IFM_ETHER;
|
|
|
|
if (!adapter->link_active) {
|
|
IXV_CORE_UNLOCK(adapter);
|
|
return;
|
|
}
|
|
|
|
ifmr->ifm_status |= IFM_ACTIVE;
|
|
|
|
switch (adapter->link_speed) {
|
|
case IXGBE_LINK_SPEED_1GB_FULL:
|
|
ifmr->ifm_active |= IFM_1000_T | IFM_FDX;
|
|
break;
|
|
case IXGBE_LINK_SPEED_10GB_FULL:
|
|
ifmr->ifm_active |= IFM_FDX;
|
|
break;
|
|
}
|
|
|
|
IXV_CORE_UNLOCK(adapter);
|
|
|
|
return;
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Media Ioctl callback
|
|
*
|
|
* This routine is called when the user changes speed/duplex using
|
|
* media/mediopt option with ifconfig.
|
|
*
|
|
**********************************************************************/
|
|
static int
|
|
ixv_media_change(struct ifnet * ifp)
|
|
{
|
|
struct adapter *adapter = ifp->if_softc;
|
|
struct ifmedia *ifm = &adapter->media;
|
|
|
|
INIT_DEBUGOUT("ixv_media_change: begin");
|
|
|
|
if (IFM_TYPE(ifm->ifm_media) != IFM_ETHER)
|
|
return (EINVAL);
|
|
|
|
switch (IFM_SUBTYPE(ifm->ifm_media)) {
|
|
case IFM_AUTO:
|
|
break;
|
|
default:
|
|
device_printf(adapter->dev, "Only auto media type\n");
|
|
return (EINVAL);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* This routine maps the mbufs to tx descriptors, allowing the
|
|
* TX engine to transmit the packets.
|
|
* - return 0 on success, positive on failure
|
|
*
|
|
**********************************************************************/
|
|
|
|
static int
|
|
ixv_xmit(struct tx_ring *txr, struct mbuf **m_headp)
|
|
{
|
|
struct adapter *adapter = txr->adapter;
|
|
u32 olinfo_status = 0, cmd_type_len;
|
|
u32 paylen = 0;
|
|
int i, j, error, nsegs;
|
|
int first, last = 0;
|
|
struct mbuf *m_head;
|
|
bus_dma_segment_t segs[32];
|
|
bus_dmamap_t map;
|
|
struct ixv_tx_buf *txbuf, *txbuf_mapped;
|
|
union ixgbe_adv_tx_desc *txd = NULL;
|
|
|
|
m_head = *m_headp;
|
|
|
|
/* Basic descriptor defines */
|
|
cmd_type_len = (IXGBE_ADVTXD_DTYP_DATA |
|
|
IXGBE_ADVTXD_DCMD_IFCS | IXGBE_ADVTXD_DCMD_DEXT);
|
|
|
|
if (m_head->m_flags & M_VLANTAG)
|
|
cmd_type_len |= IXGBE_ADVTXD_DCMD_VLE;
|
|
|
|
/*
|
|
* Important to capture the first descriptor
|
|
* used because it will contain the index of
|
|
* the one we tell the hardware to report back
|
|
*/
|
|
first = txr->next_avail_desc;
|
|
txbuf = &txr->tx_buffers[first];
|
|
txbuf_mapped = txbuf;
|
|
map = txbuf->map;
|
|
|
|
/*
|
|
* Map the packet for DMA.
|
|
*/
|
|
error = bus_dmamap_load_mbuf_sg(txr->txtag, map,
|
|
*m_headp, segs, &nsegs, BUS_DMA_NOWAIT);
|
|
|
|
if (error == EFBIG) {
|
|
struct mbuf *m;
|
|
|
|
m = m_defrag(*m_headp, M_NOWAIT);
|
|
if (m == NULL) {
|
|
adapter->mbuf_defrag_failed++;
|
|
m_freem(*m_headp);
|
|
*m_headp = NULL;
|
|
return (ENOBUFS);
|
|
}
|
|
*m_headp = m;
|
|
|
|
/* Try it again */
|
|
error = bus_dmamap_load_mbuf_sg(txr->txtag, map,
|
|
*m_headp, segs, &nsegs, BUS_DMA_NOWAIT);
|
|
|
|
if (error == ENOMEM) {
|
|
adapter->no_tx_dma_setup++;
|
|
return (error);
|
|
} else if (error != 0) {
|
|
adapter->no_tx_dma_setup++;
|
|
m_freem(*m_headp);
|
|
*m_headp = NULL;
|
|
return (error);
|
|
}
|
|
} else if (error == ENOMEM) {
|
|
adapter->no_tx_dma_setup++;
|
|
return (error);
|
|
} else if (error != 0) {
|
|
adapter->no_tx_dma_setup++;
|
|
m_freem(*m_headp);
|
|
*m_headp = NULL;
|
|
return (error);
|
|
}
|
|
|
|
/* Make certain there are enough descriptors */
|
|
if (nsegs > txr->tx_avail - 2) {
|
|
txr->no_desc_avail++;
|
|
error = ENOBUFS;
|
|
goto xmit_fail;
|
|
}
|
|
m_head = *m_headp;
|
|
|
|
/*
|
|
** Set up the appropriate offload context
|
|
** this becomes the first descriptor of
|
|
** a packet.
|
|
*/
|
|
if (m_head->m_pkthdr.csum_flags & CSUM_TSO) {
|
|
if (ixv_tso_setup(txr, m_head, &paylen)) {
|
|
cmd_type_len |= IXGBE_ADVTXD_DCMD_TSE;
|
|
olinfo_status |= IXGBE_TXD_POPTS_IXSM << 8;
|
|
olinfo_status |= IXGBE_TXD_POPTS_TXSM << 8;
|
|
olinfo_status |= paylen << IXGBE_ADVTXD_PAYLEN_SHIFT;
|
|
++adapter->tso_tx;
|
|
} else
|
|
return (ENXIO);
|
|
} else if (ixv_tx_ctx_setup(txr, m_head))
|
|
olinfo_status |= IXGBE_TXD_POPTS_TXSM << 8;
|
|
|
|
/* Record payload length */
|
|
if (paylen == 0)
|
|
olinfo_status |= m_head->m_pkthdr.len <<
|
|
IXGBE_ADVTXD_PAYLEN_SHIFT;
|
|
|
|
i = txr->next_avail_desc;
|
|
for (j = 0; j < nsegs; j++) {
|
|
bus_size_t seglen;
|
|
bus_addr_t segaddr;
|
|
|
|
txbuf = &txr->tx_buffers[i];
|
|
txd = &txr->tx_base[i];
|
|
seglen = segs[j].ds_len;
|
|
segaddr = htole64(segs[j].ds_addr);
|
|
|
|
txd->read.buffer_addr = segaddr;
|
|
txd->read.cmd_type_len = htole32(txr->txd_cmd |
|
|
cmd_type_len |seglen);
|
|
txd->read.olinfo_status = htole32(olinfo_status);
|
|
last = i; /* descriptor that will get completion IRQ */
|
|
|
|
if (++i == adapter->num_tx_desc)
|
|
i = 0;
|
|
|
|
txbuf->m_head = NULL;
|
|
txbuf->eop_index = -1;
|
|
}
|
|
|
|
txd->read.cmd_type_len |=
|
|
htole32(IXGBE_TXD_CMD_EOP | IXGBE_TXD_CMD_RS);
|
|
txr->tx_avail -= nsegs;
|
|
txr->next_avail_desc = i;
|
|
|
|
txbuf->m_head = m_head;
|
|
txr->tx_buffers[first].map = txbuf->map;
|
|
txbuf->map = map;
|
|
bus_dmamap_sync(txr->txtag, map, BUS_DMASYNC_PREWRITE);
|
|
|
|
/* Set the index of the descriptor that will be marked done */
|
|
txbuf = &txr->tx_buffers[first];
|
|
txbuf->eop_index = last;
|
|
|
|
bus_dmamap_sync(txr->txdma.dma_tag, txr->txdma.dma_map,
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
/*
|
|
* Advance the Transmit Descriptor Tail (Tdt), this tells the
|
|
* hardware that this frame is available to transmit.
|
|
*/
|
|
++txr->total_packets;
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_VFTDT(txr->me), i);
|
|
|
|
return (0);
|
|
|
|
xmit_fail:
|
|
bus_dmamap_unload(txr->txtag, txbuf->map);
|
|
return (error);
|
|
|
|
}
|
|
|
|
|
|
/*********************************************************************
|
|
* Multicast Update
|
|
*
|
|
* This routine is called whenever multicast address list is updated.
|
|
*
|
|
**********************************************************************/
|
|
#define IXGBE_RAR_ENTRIES 16
|
|
|
|
static void
|
|
ixv_set_multi(struct adapter *adapter)
|
|
{
|
|
u8 mta[MAX_NUM_MULTICAST_ADDRESSES * IXGBE_ETH_LENGTH_OF_ADDRESS];
|
|
u8 *update_ptr;
|
|
struct ifmultiaddr *ifma;
|
|
int mcnt = 0;
|
|
struct ifnet *ifp = adapter->ifp;
|
|
|
|
IOCTL_DEBUGOUT("ixv_set_multi: begin");
|
|
|
|
#if __FreeBSD_version < 800000
|
|
IF_ADDR_LOCK(ifp);
|
|
#else
|
|
if_maddr_rlock(ifp);
|
|
#endif
|
|
TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
|
|
if (ifma->ifma_addr->sa_family != AF_LINK)
|
|
continue;
|
|
bcopy(LLADDR((struct sockaddr_dl *) ifma->ifma_addr),
|
|
&mta[mcnt * IXGBE_ETH_LENGTH_OF_ADDRESS],
|
|
IXGBE_ETH_LENGTH_OF_ADDRESS);
|
|
mcnt++;
|
|
}
|
|
#if __FreeBSD_version < 800000
|
|
IF_ADDR_UNLOCK(ifp);
|
|
#else
|
|
if_maddr_runlock(ifp);
|
|
#endif
|
|
|
|
update_ptr = mta;
|
|
|
|
ixgbe_update_mc_addr_list(&adapter->hw,
|
|
update_ptr, mcnt, ixv_mc_array_itr, TRUE);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* This is an iterator function now needed by the multicast
|
|
* shared code. It simply feeds the shared code routine the
|
|
* addresses in the array of ixv_set_multi() one by one.
|
|
*/
|
|
static u8 *
|
|
ixv_mc_array_itr(struct ixgbe_hw *hw, u8 **update_ptr, u32 *vmdq)
|
|
{
|
|
u8 *addr = *update_ptr;
|
|
u8 *newptr;
|
|
*vmdq = 0;
|
|
|
|
newptr = addr + IXGBE_ETH_LENGTH_OF_ADDRESS;
|
|
*update_ptr = newptr;
|
|
return addr;
|
|
}
|
|
|
|
/*********************************************************************
|
|
* Timer routine
|
|
*
|
|
* This routine checks for link status,updates statistics,
|
|
* and runs the watchdog check.
|
|
*
|
|
**********************************************************************/
|
|
|
|
static void
|
|
ixv_local_timer(void *arg)
|
|
{
|
|
struct adapter *adapter = arg;
|
|
device_t dev = adapter->dev;
|
|
struct tx_ring *txr = adapter->tx_rings;
|
|
int i;
|
|
|
|
mtx_assert(&adapter->core_mtx, MA_OWNED);
|
|
|
|
ixv_update_link_status(adapter);
|
|
|
|
/* Stats Update */
|
|
ixv_update_stats(adapter);
|
|
|
|
/*
|
|
* If the interface has been paused
|
|
* then don't do the watchdog check
|
|
*/
|
|
if (IXGBE_READ_REG(&adapter->hw, IXGBE_TFCS) & IXGBE_TFCS_TXOFF)
|
|
goto out;
|
|
/*
|
|
** Check for time since any descriptor was cleaned
|
|
*/
|
|
for (i = 0; i < adapter->num_queues; i++, txr++) {
|
|
IXV_TX_LOCK(txr);
|
|
if (txr->watchdog_check == FALSE) {
|
|
IXV_TX_UNLOCK(txr);
|
|
continue;
|
|
}
|
|
if ((ticks - txr->watchdog_time) > IXV_WATCHDOG)
|
|
goto hung;
|
|
IXV_TX_UNLOCK(txr);
|
|
}
|
|
out:
|
|
ixv_rearm_queues(adapter, adapter->que_mask);
|
|
callout_reset(&adapter->timer, hz, ixv_local_timer, adapter);
|
|
return;
|
|
|
|
hung:
|
|
device_printf(adapter->dev, "Watchdog timeout -- resetting\n");
|
|
device_printf(dev,"Queue(%d) tdh = %d, hw tdt = %d\n", txr->me,
|
|
IXGBE_READ_REG(&adapter->hw, IXGBE_VFTDH(i)),
|
|
IXGBE_READ_REG(&adapter->hw, IXGBE_VFTDT(i)));
|
|
device_printf(dev,"TX(%d) desc avail = %d,"
|
|
"Next TX to Clean = %d\n",
|
|
txr->me, txr->tx_avail, txr->next_to_clean);
|
|
adapter->ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
|
|
adapter->watchdog_events++;
|
|
IXV_TX_UNLOCK(txr);
|
|
ixv_init_locked(adapter);
|
|
}
|
|
|
|
/*
|
|
** Note: this routine updates the OS on the link state
|
|
** the real check of the hardware only happens with
|
|
** a link interrupt.
|
|
*/
|
|
static void
|
|
ixv_update_link_status(struct adapter *adapter)
|
|
{
|
|
struct ifnet *ifp = adapter->ifp;
|
|
struct tx_ring *txr = adapter->tx_rings;
|
|
device_t dev = adapter->dev;
|
|
|
|
|
|
if (adapter->link_up){
|
|
if (adapter->link_active == FALSE) {
|
|
if (bootverbose)
|
|
device_printf(dev,"Link is up %d Gbps %s \n",
|
|
((adapter->link_speed == 128)? 10:1),
|
|
"Full Duplex");
|
|
adapter->link_active = TRUE;
|
|
if_link_state_change(ifp, LINK_STATE_UP);
|
|
}
|
|
} else { /* Link down */
|
|
if (adapter->link_active == TRUE) {
|
|
if (bootverbose)
|
|
device_printf(dev,"Link is Down\n");
|
|
if_link_state_change(ifp, LINK_STATE_DOWN);
|
|
adapter->link_active = FALSE;
|
|
for (int i = 0; i < adapter->num_queues;
|
|
i++, txr++)
|
|
txr->watchdog_check = FALSE;
|
|
}
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
|
|
/*********************************************************************
|
|
*
|
|
* This routine disables all traffic on the adapter by issuing a
|
|
* global reset on the MAC and deallocates TX/RX buffers.
|
|
*
|
|
**********************************************************************/
|
|
|
|
static void
|
|
ixv_stop(void *arg)
|
|
{
|
|
struct ifnet *ifp;
|
|
struct adapter *adapter = arg;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
ifp = adapter->ifp;
|
|
|
|
mtx_assert(&adapter->core_mtx, MA_OWNED);
|
|
|
|
INIT_DEBUGOUT("ixv_stop: begin\n");
|
|
ixv_disable_intr(adapter);
|
|
|
|
/* Tell the stack that the interface is no longer active */
|
|
ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE);
|
|
|
|
ixgbe_reset_hw(hw);
|
|
adapter->hw.adapter_stopped = FALSE;
|
|
ixgbe_stop_adapter(hw);
|
|
callout_stop(&adapter->timer);
|
|
|
|
/* reprogram the RAR[0] in case user changed it. */
|
|
ixgbe_set_rar(hw, 0, hw->mac.addr, 0, IXGBE_RAH_AV);
|
|
|
|
return;
|
|
}
|
|
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Determine hardware revision.
|
|
*
|
|
**********************************************************************/
|
|
static void
|
|
ixv_identify_hardware(struct adapter *adapter)
|
|
{
|
|
device_t dev = adapter->dev;
|
|
u16 pci_cmd_word;
|
|
|
|
/*
|
|
** Make sure BUSMASTER is set, on a VM under
|
|
** KVM it may not be and will break things.
|
|
*/
|
|
pci_enable_busmaster(dev);
|
|
pci_cmd_word = pci_read_config(dev, PCIR_COMMAND, 2);
|
|
|
|
/* Save off the information about this board */
|
|
adapter->hw.vendor_id = pci_get_vendor(dev);
|
|
adapter->hw.device_id = pci_get_device(dev);
|
|
adapter->hw.revision_id = pci_read_config(dev, PCIR_REVID, 1);
|
|
adapter->hw.subsystem_vendor_id =
|
|
pci_read_config(dev, PCIR_SUBVEND_0, 2);
|
|
adapter->hw.subsystem_device_id =
|
|
pci_read_config(dev, PCIR_SUBDEV_0, 2);
|
|
|
|
return;
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Setup MSIX Interrupt resources and handlers
|
|
*
|
|
**********************************************************************/
|
|
static int
|
|
ixv_allocate_msix(struct adapter *adapter)
|
|
{
|
|
device_t dev = adapter->dev;
|
|
struct ix_queue *que = adapter->queues;
|
|
int error, rid, vector = 0;
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++, vector++, que++) {
|
|
rid = vector + 1;
|
|
que->res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
|
|
RF_SHAREABLE | RF_ACTIVE);
|
|
if (que->res == NULL) {
|
|
device_printf(dev,"Unable to allocate"
|
|
" bus resource: que interrupt [%d]\n", vector);
|
|
return (ENXIO);
|
|
}
|
|
/* Set the handler function */
|
|
error = bus_setup_intr(dev, que->res,
|
|
INTR_TYPE_NET | INTR_MPSAFE, NULL,
|
|
ixv_msix_que, que, &que->tag);
|
|
if (error) {
|
|
que->res = NULL;
|
|
device_printf(dev, "Failed to register QUE handler");
|
|
return (error);
|
|
}
|
|
#if __FreeBSD_version >= 800504
|
|
bus_describe_intr(dev, que->res, que->tag, "que %d", i);
|
|
#endif
|
|
que->msix = vector;
|
|
adapter->que_mask |= (u64)(1 << que->msix);
|
|
/*
|
|
** Bind the msix vector, and thus the
|
|
** ring to the corresponding cpu.
|
|
*/
|
|
if (adapter->num_queues > 1)
|
|
bus_bind_intr(dev, que->res, i);
|
|
|
|
TASK_INIT(&que->que_task, 0, ixv_handle_que, que);
|
|
que->tq = taskqueue_create_fast("ixv_que", M_NOWAIT,
|
|
taskqueue_thread_enqueue, &que->tq);
|
|
taskqueue_start_threads(&que->tq, 1, PI_NET, "%s que",
|
|
device_get_nameunit(adapter->dev));
|
|
}
|
|
|
|
/* and Mailbox */
|
|
rid = vector + 1;
|
|
adapter->res = bus_alloc_resource_any(dev,
|
|
SYS_RES_IRQ, &rid, RF_SHAREABLE | RF_ACTIVE);
|
|
if (!adapter->res) {
|
|
device_printf(dev,"Unable to allocate"
|
|
" bus resource: MBX interrupt [%d]\n", rid);
|
|
return (ENXIO);
|
|
}
|
|
/* Set the mbx handler function */
|
|
error = bus_setup_intr(dev, adapter->res,
|
|
INTR_TYPE_NET | INTR_MPSAFE, NULL,
|
|
ixv_msix_mbx, adapter, &adapter->tag);
|
|
if (error) {
|
|
adapter->res = NULL;
|
|
device_printf(dev, "Failed to register LINK handler");
|
|
return (error);
|
|
}
|
|
#if __FreeBSD_version >= 800504
|
|
bus_describe_intr(dev, adapter->res, adapter->tag, "mbx");
|
|
#endif
|
|
adapter->mbxvec = vector;
|
|
/* Tasklets for Mailbox */
|
|
TASK_INIT(&adapter->mbx_task, 0, ixv_handle_mbx, adapter);
|
|
adapter->tq = taskqueue_create_fast("ixv_mbx", M_NOWAIT,
|
|
taskqueue_thread_enqueue, &adapter->tq);
|
|
taskqueue_start_threads(&adapter->tq, 1, PI_NET, "%s mbxq",
|
|
device_get_nameunit(adapter->dev));
|
|
/*
|
|
** Due to a broken design QEMU will fail to properly
|
|
** enable the guest for MSIX unless the vectors in
|
|
** the table are all set up, so we must rewrite the
|
|
** ENABLE in the MSIX control register again at this
|
|
** point to cause it to successfully initialize us.
|
|
*/
|
|
if (adapter->hw.mac.type == ixgbe_mac_82599_vf) {
|
|
int msix_ctrl;
|
|
pci_find_cap(dev, PCIY_MSIX, &rid);
|
|
rid += PCIR_MSIX_CTRL;
|
|
msix_ctrl = pci_read_config(dev, rid, 2);
|
|
msix_ctrl |= PCIM_MSIXCTRL_MSIX_ENABLE;
|
|
pci_write_config(dev, rid, msix_ctrl, 2);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Setup MSIX resources, note that the VF
|
|
* device MUST use MSIX, there is no fallback.
|
|
*/
|
|
static int
|
|
ixv_setup_msix(struct adapter *adapter)
|
|
{
|
|
device_t dev = adapter->dev;
|
|
int rid, want;
|
|
|
|
|
|
/* First try MSI/X */
|
|
rid = PCIR_BAR(3);
|
|
adapter->msix_mem = bus_alloc_resource_any(dev,
|
|
SYS_RES_MEMORY, &rid, RF_ACTIVE);
|
|
if (adapter->msix_mem == NULL) {
|
|
device_printf(adapter->dev,
|
|
"Unable to map MSIX table \n");
|
|
goto out;
|
|
}
|
|
|
|
/*
|
|
** Want two vectors: one for a queue,
|
|
** plus an additional for mailbox.
|
|
*/
|
|
want = 2;
|
|
if ((pci_alloc_msix(dev, &want) == 0) && (want == 2)) {
|
|
device_printf(adapter->dev,
|
|
"Using MSIX interrupts with %d vectors\n", want);
|
|
return (want);
|
|
}
|
|
/* Release in case alloc was insufficient */
|
|
pci_release_msi(dev);
|
|
out:
|
|
if (adapter->msix_mem != NULL) {
|
|
bus_release_resource(dev, SYS_RES_MEMORY,
|
|
rid, adapter->msix_mem);
|
|
adapter->msix_mem = NULL;
|
|
}
|
|
device_printf(adapter->dev,"MSIX config error\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
|
|
static int
|
|
ixv_allocate_pci_resources(struct adapter *adapter)
|
|
{
|
|
int rid;
|
|
device_t dev = adapter->dev;
|
|
|
|
rid = PCIR_BAR(0);
|
|
adapter->pci_mem = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
|
|
&rid, RF_ACTIVE);
|
|
|
|
if (!(adapter->pci_mem)) {
|
|
device_printf(dev,"Unable to allocate bus resource: memory\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
adapter->osdep.mem_bus_space_tag =
|
|
rman_get_bustag(adapter->pci_mem);
|
|
adapter->osdep.mem_bus_space_handle =
|
|
rman_get_bushandle(adapter->pci_mem);
|
|
adapter->hw.hw_addr = (u8 *) &adapter->osdep.mem_bus_space_handle;
|
|
|
|
adapter->num_queues = 1;
|
|
adapter->hw.back = &adapter->osdep;
|
|
|
|
/*
|
|
** Now setup MSI/X, should
|
|
** return us the number of
|
|
** configured vectors.
|
|
*/
|
|
adapter->msix = ixv_setup_msix(adapter);
|
|
if (adapter->msix == ENXIO)
|
|
return (ENXIO);
|
|
else
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
ixv_free_pci_resources(struct adapter * adapter)
|
|
{
|
|
struct ix_queue *que = adapter->queues;
|
|
device_t dev = adapter->dev;
|
|
int rid, memrid;
|
|
|
|
memrid = PCIR_BAR(MSIX_BAR);
|
|
|
|
/*
|
|
** There is a slight possibility of a failure mode
|
|
** in attach that will result in entering this function
|
|
** before interrupt resources have been initialized, and
|
|
** in that case we do not want to execute the loops below
|
|
** We can detect this reliably by the state of the adapter
|
|
** res pointer.
|
|
*/
|
|
if (adapter->res == NULL)
|
|
goto mem;
|
|
|
|
/*
|
|
** Release all msix queue resources:
|
|
*/
|
|
for (int i = 0; i < adapter->num_queues; i++, que++) {
|
|
rid = que->msix + 1;
|
|
if (que->tag != NULL) {
|
|
bus_teardown_intr(dev, que->res, que->tag);
|
|
que->tag = NULL;
|
|
}
|
|
if (que->res != NULL)
|
|
bus_release_resource(dev, SYS_RES_IRQ, rid, que->res);
|
|
}
|
|
|
|
|
|
/* Clean the Legacy or Link interrupt last */
|
|
if (adapter->mbxvec) /* we are doing MSIX */
|
|
rid = adapter->mbxvec + 1;
|
|
else
|
|
(adapter->msix != 0) ? (rid = 1):(rid = 0);
|
|
|
|
if (adapter->tag != NULL) {
|
|
bus_teardown_intr(dev, adapter->res, adapter->tag);
|
|
adapter->tag = NULL;
|
|
}
|
|
if (adapter->res != NULL)
|
|
bus_release_resource(dev, SYS_RES_IRQ, rid, adapter->res);
|
|
|
|
mem:
|
|
if (adapter->msix)
|
|
pci_release_msi(dev);
|
|
|
|
if (adapter->msix_mem != NULL)
|
|
bus_release_resource(dev, SYS_RES_MEMORY,
|
|
memrid, adapter->msix_mem);
|
|
|
|
if (adapter->pci_mem != NULL)
|
|
bus_release_resource(dev, SYS_RES_MEMORY,
|
|
PCIR_BAR(0), adapter->pci_mem);
|
|
|
|
return;
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Setup networking device structure and register an interface.
|
|
*
|
|
**********************************************************************/
|
|
static void
|
|
ixv_setup_interface(device_t dev, struct adapter *adapter)
|
|
{
|
|
struct ifnet *ifp;
|
|
|
|
INIT_DEBUGOUT("ixv_setup_interface: begin");
|
|
|
|
ifp = adapter->ifp = if_alloc(IFT_ETHER);
|
|
if (ifp == NULL)
|
|
panic("%s: can not if_alloc()\n", device_get_nameunit(dev));
|
|
if_initname(ifp, device_get_name(dev), device_get_unit(dev));
|
|
ifp->if_baudrate = 1000000000;
|
|
ifp->if_init = ixv_init;
|
|
ifp->if_softc = adapter;
|
|
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
|
|
ifp->if_ioctl = ixv_ioctl;
|
|
#if __FreeBSD_version >= 800000
|
|
ifp->if_transmit = ixv_mq_start;
|
|
ifp->if_qflush = ixv_qflush;
|
|
#else
|
|
ifp->if_start = ixv_start;
|
|
#endif
|
|
ifp->if_snd.ifq_maxlen = adapter->num_tx_desc - 2;
|
|
|
|
ether_ifattach(ifp, adapter->hw.mac.addr);
|
|
|
|
adapter->max_frame_size =
|
|
ifp->if_mtu + ETHER_HDR_LEN + ETHER_CRC_LEN;
|
|
|
|
/*
|
|
* Tell the upper layer(s) we support long frames.
|
|
*/
|
|
ifp->if_data.ifi_hdrlen = sizeof(struct ether_vlan_header);
|
|
|
|
ifp->if_capabilities |= IFCAP_HWCSUM | IFCAP_TSO4 | IFCAP_VLAN_HWCSUM;
|
|
ifp->if_capabilities |= IFCAP_JUMBO_MTU;
|
|
ifp->if_capabilities |= IFCAP_VLAN_HWTAGGING
|
|
| IFCAP_VLAN_HWTSO
|
|
| IFCAP_VLAN_MTU;
|
|
ifp->if_capenable = ifp->if_capabilities;
|
|
|
|
/* Don't enable LRO by default */
|
|
ifp->if_capabilities |= IFCAP_LRO;
|
|
|
|
/*
|
|
* Specify the media types supported by this adapter and register
|
|
* callbacks to update media and link information
|
|
*/
|
|
ifmedia_init(&adapter->media, IFM_IMASK, ixv_media_change,
|
|
ixv_media_status);
|
|
ifmedia_add(&adapter->media, IFM_ETHER | IFM_FDX, 0, NULL);
|
|
ifmedia_add(&adapter->media, IFM_ETHER | IFM_AUTO, 0, NULL);
|
|
ifmedia_set(&adapter->media, IFM_ETHER | IFM_AUTO);
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
ixv_config_link(struct adapter *adapter)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u32 autoneg, err = 0;
|
|
|
|
if (hw->mac.ops.check_link)
|
|
err = hw->mac.ops.check_link(hw, &autoneg,
|
|
&adapter->link_up, FALSE);
|
|
if (err)
|
|
goto out;
|
|
|
|
if (hw->mac.ops.setup_link)
|
|
err = hw->mac.ops.setup_link(hw,
|
|
autoneg, adapter->link_up);
|
|
out:
|
|
return;
|
|
}
|
|
|
|
/********************************************************************
|
|
* Manage DMA'able memory.
|
|
*******************************************************************/
|
|
static void
|
|
ixv_dmamap_cb(void *arg, bus_dma_segment_t * segs, int nseg, int error)
|
|
{
|
|
if (error)
|
|
return;
|
|
*(bus_addr_t *) arg = segs->ds_addr;
|
|
return;
|
|
}
|
|
|
|
static int
|
|
ixv_dma_malloc(struct adapter *adapter, bus_size_t size,
|
|
struct ixv_dma_alloc *dma, int mapflags)
|
|
{
|
|
device_t dev = adapter->dev;
|
|
int r;
|
|
|
|
r = bus_dma_tag_create(bus_get_dma_tag(adapter->dev), /* parent */
|
|
DBA_ALIGN, 0, /* alignment, bounds */
|
|
BUS_SPACE_MAXADDR, /* lowaddr */
|
|
BUS_SPACE_MAXADDR, /* highaddr */
|
|
NULL, NULL, /* filter, filterarg */
|
|
size, /* maxsize */
|
|
1, /* nsegments */
|
|
size, /* maxsegsize */
|
|
BUS_DMA_ALLOCNOW, /* flags */
|
|
NULL, /* lockfunc */
|
|
NULL, /* lockfuncarg */
|
|
&dma->dma_tag);
|
|
if (r != 0) {
|
|
device_printf(dev,"ixv_dma_malloc: bus_dma_tag_create failed; "
|
|
"error %u\n", r);
|
|
goto fail_0;
|
|
}
|
|
r = bus_dmamem_alloc(dma->dma_tag, (void **)&dma->dma_vaddr,
|
|
BUS_DMA_NOWAIT, &dma->dma_map);
|
|
if (r != 0) {
|
|
device_printf(dev,"ixv_dma_malloc: bus_dmamem_alloc failed; "
|
|
"error %u\n", r);
|
|
goto fail_1;
|
|
}
|
|
r = bus_dmamap_load(dma->dma_tag, dma->dma_map, dma->dma_vaddr,
|
|
size,
|
|
ixv_dmamap_cb,
|
|
&dma->dma_paddr,
|
|
mapflags | BUS_DMA_NOWAIT);
|
|
if (r != 0) {
|
|
device_printf(dev,"ixv_dma_malloc: bus_dmamap_load failed; "
|
|
"error %u\n", r);
|
|
goto fail_2;
|
|
}
|
|
dma->dma_size = size;
|
|
return (0);
|
|
fail_2:
|
|
bus_dmamem_free(dma->dma_tag, dma->dma_vaddr, dma->dma_map);
|
|
fail_1:
|
|
bus_dma_tag_destroy(dma->dma_tag);
|
|
fail_0:
|
|
dma->dma_map = NULL;
|
|
dma->dma_tag = NULL;
|
|
return (r);
|
|
}
|
|
|
|
static void
|
|
ixv_dma_free(struct adapter *adapter, struct ixv_dma_alloc *dma)
|
|
{
|
|
bus_dmamap_sync(dma->dma_tag, dma->dma_map,
|
|
BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(dma->dma_tag, dma->dma_map);
|
|
bus_dmamem_free(dma->dma_tag, dma->dma_vaddr, dma->dma_map);
|
|
bus_dma_tag_destroy(dma->dma_tag);
|
|
}
|
|
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Allocate memory for the transmit and receive rings, and then
|
|
* the descriptors associated with each, called only once at attach.
|
|
*
|
|
**********************************************************************/
|
|
static int
|
|
ixv_allocate_queues(struct adapter *adapter)
|
|
{
|
|
device_t dev = adapter->dev;
|
|
struct ix_queue *que;
|
|
struct tx_ring *txr;
|
|
struct rx_ring *rxr;
|
|
int rsize, tsize, error = 0;
|
|
int txconf = 0, rxconf = 0;
|
|
|
|
/* First allocate the top level queue structs */
|
|
if (!(adapter->queues =
|
|
(struct ix_queue *) malloc(sizeof(struct ix_queue) *
|
|
adapter->num_queues, M_DEVBUF, M_NOWAIT | M_ZERO))) {
|
|
device_printf(dev, "Unable to allocate queue memory\n");
|
|
error = ENOMEM;
|
|
goto fail;
|
|
}
|
|
|
|
/* First allocate the TX ring struct memory */
|
|
if (!(adapter->tx_rings =
|
|
(struct tx_ring *) malloc(sizeof(struct tx_ring) *
|
|
adapter->num_queues, M_DEVBUF, M_NOWAIT | M_ZERO))) {
|
|
device_printf(dev, "Unable to allocate TX ring memory\n");
|
|
error = ENOMEM;
|
|
goto tx_fail;
|
|
}
|
|
|
|
/* Next allocate the RX */
|
|
if (!(adapter->rx_rings =
|
|
(struct rx_ring *) malloc(sizeof(struct rx_ring) *
|
|
adapter->num_queues, M_DEVBUF, M_NOWAIT | M_ZERO))) {
|
|
device_printf(dev, "Unable to allocate RX ring memory\n");
|
|
error = ENOMEM;
|
|
goto rx_fail;
|
|
}
|
|
|
|
/* For the ring itself */
|
|
tsize = roundup2(adapter->num_tx_desc *
|
|
sizeof(union ixgbe_adv_tx_desc), DBA_ALIGN);
|
|
|
|
/*
|
|
* Now set up the TX queues, txconf is needed to handle the
|
|
* possibility that things fail midcourse and we need to
|
|
* undo memory gracefully
|
|
*/
|
|
for (int i = 0; i < adapter->num_queues; i++, txconf++) {
|
|
/* Set up some basics */
|
|
txr = &adapter->tx_rings[i];
|
|
txr->adapter = adapter;
|
|
txr->me = i;
|
|
|
|
/* Initialize the TX side lock */
|
|
snprintf(txr->mtx_name, sizeof(txr->mtx_name), "%s:tx(%d)",
|
|
device_get_nameunit(dev), txr->me);
|
|
mtx_init(&txr->tx_mtx, txr->mtx_name, NULL, MTX_DEF);
|
|
|
|
if (ixv_dma_malloc(adapter, tsize,
|
|
&txr->txdma, BUS_DMA_NOWAIT)) {
|
|
device_printf(dev,
|
|
"Unable to allocate TX Descriptor memory\n");
|
|
error = ENOMEM;
|
|
goto err_tx_desc;
|
|
}
|
|
txr->tx_base = (union ixgbe_adv_tx_desc *)txr->txdma.dma_vaddr;
|
|
bzero((void *)txr->tx_base, tsize);
|
|
|
|
/* Now allocate transmit buffers for the ring */
|
|
if (ixv_allocate_transmit_buffers(txr)) {
|
|
device_printf(dev,
|
|
"Critical Failure setting up transmit buffers\n");
|
|
error = ENOMEM;
|
|
goto err_tx_desc;
|
|
}
|
|
#if __FreeBSD_version >= 800000
|
|
/* Allocate a buf ring */
|
|
txr->br = buf_ring_alloc(IXV_BR_SIZE, M_DEVBUF,
|
|
M_WAITOK, &txr->tx_mtx);
|
|
if (txr->br == NULL) {
|
|
device_printf(dev,
|
|
"Critical Failure setting up buf ring\n");
|
|
error = ENOMEM;
|
|
goto err_tx_desc;
|
|
}
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* Next the RX queues...
|
|
*/
|
|
rsize = roundup2(adapter->num_rx_desc *
|
|
sizeof(union ixgbe_adv_rx_desc), DBA_ALIGN);
|
|
for (int i = 0; i < adapter->num_queues; i++, rxconf++) {
|
|
rxr = &adapter->rx_rings[i];
|
|
/* Set up some basics */
|
|
rxr->adapter = adapter;
|
|
rxr->me = i;
|
|
|
|
/* Initialize the RX side lock */
|
|
snprintf(rxr->mtx_name, sizeof(rxr->mtx_name), "%s:rx(%d)",
|
|
device_get_nameunit(dev), rxr->me);
|
|
mtx_init(&rxr->rx_mtx, rxr->mtx_name, NULL, MTX_DEF);
|
|
|
|
if (ixv_dma_malloc(adapter, rsize,
|
|
&rxr->rxdma, BUS_DMA_NOWAIT)) {
|
|
device_printf(dev,
|
|
"Unable to allocate RxDescriptor memory\n");
|
|
error = ENOMEM;
|
|
goto err_rx_desc;
|
|
}
|
|
rxr->rx_base = (union ixgbe_adv_rx_desc *)rxr->rxdma.dma_vaddr;
|
|
bzero((void *)rxr->rx_base, rsize);
|
|
|
|
/* Allocate receive buffers for the ring*/
|
|
if (ixv_allocate_receive_buffers(rxr)) {
|
|
device_printf(dev,
|
|
"Critical Failure setting up receive buffers\n");
|
|
error = ENOMEM;
|
|
goto err_rx_desc;
|
|
}
|
|
}
|
|
|
|
/*
|
|
** Finally set up the queue holding structs
|
|
*/
|
|
for (int i = 0; i < adapter->num_queues; i++) {
|
|
que = &adapter->queues[i];
|
|
que->adapter = adapter;
|
|
que->txr = &adapter->tx_rings[i];
|
|
que->rxr = &adapter->rx_rings[i];
|
|
}
|
|
|
|
return (0);
|
|
|
|
err_rx_desc:
|
|
for (rxr = adapter->rx_rings; rxconf > 0; rxr++, rxconf--)
|
|
ixv_dma_free(adapter, &rxr->rxdma);
|
|
err_tx_desc:
|
|
for (txr = adapter->tx_rings; txconf > 0; txr++, txconf--)
|
|
ixv_dma_free(adapter, &txr->txdma);
|
|
free(adapter->rx_rings, M_DEVBUF);
|
|
rx_fail:
|
|
free(adapter->tx_rings, M_DEVBUF);
|
|
tx_fail:
|
|
free(adapter->queues, M_DEVBUF);
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Allocate memory for tx_buffer structures. The tx_buffer stores all
|
|
* the information needed to transmit a packet on the wire. This is
|
|
* called only once at attach, setup is done every reset.
|
|
*
|
|
**********************************************************************/
|
|
static int
|
|
ixv_allocate_transmit_buffers(struct tx_ring *txr)
|
|
{
|
|
struct adapter *adapter = txr->adapter;
|
|
device_t dev = adapter->dev;
|
|
struct ixv_tx_buf *txbuf;
|
|
int error, i;
|
|
|
|
/*
|
|
* Setup DMA descriptor areas.
|
|
*/
|
|
if ((error = bus_dma_tag_create(
|
|
bus_get_dma_tag(adapter->dev), /* parent */
|
|
1, 0, /* alignment, bounds */
|
|
BUS_SPACE_MAXADDR, /* lowaddr */
|
|
BUS_SPACE_MAXADDR, /* highaddr */
|
|
NULL, NULL, /* filter, filterarg */
|
|
IXV_TSO_SIZE, /* maxsize */
|
|
32, /* nsegments */
|
|
PAGE_SIZE, /* maxsegsize */
|
|
0, /* flags */
|
|
NULL, /* lockfunc */
|
|
NULL, /* lockfuncarg */
|
|
&txr->txtag))) {
|
|
device_printf(dev,"Unable to allocate TX DMA tag\n");
|
|
goto fail;
|
|
}
|
|
|
|
if (!(txr->tx_buffers =
|
|
(struct ixv_tx_buf *) malloc(sizeof(struct ixv_tx_buf) *
|
|
adapter->num_tx_desc, M_DEVBUF, M_NOWAIT | M_ZERO))) {
|
|
device_printf(dev, "Unable to allocate tx_buffer memory\n");
|
|
error = ENOMEM;
|
|
goto fail;
|
|
}
|
|
|
|
/* Create the descriptor buffer dma maps */
|
|
txbuf = txr->tx_buffers;
|
|
for (i = 0; i < adapter->num_tx_desc; i++, txbuf++) {
|
|
error = bus_dmamap_create(txr->txtag, 0, &txbuf->map);
|
|
if (error != 0) {
|
|
device_printf(dev, "Unable to create TX DMA map\n");
|
|
goto fail;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
fail:
|
|
/* We free all, it handles case where we are in the middle */
|
|
ixv_free_transmit_structures(adapter);
|
|
return (error);
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Initialize a transmit ring.
|
|
*
|
|
**********************************************************************/
|
|
static void
|
|
ixv_setup_transmit_ring(struct tx_ring *txr)
|
|
{
|
|
struct adapter *adapter = txr->adapter;
|
|
struct ixv_tx_buf *txbuf;
|
|
int i;
|
|
|
|
/* Clear the old ring contents */
|
|
IXV_TX_LOCK(txr);
|
|
bzero((void *)txr->tx_base,
|
|
(sizeof(union ixgbe_adv_tx_desc)) * adapter->num_tx_desc);
|
|
/* Reset indices */
|
|
txr->next_avail_desc = 0;
|
|
txr->next_to_clean = 0;
|
|
|
|
/* Free any existing tx buffers. */
|
|
txbuf = txr->tx_buffers;
|
|
for (i = 0; i < adapter->num_tx_desc; i++, txbuf++) {
|
|
if (txbuf->m_head != NULL) {
|
|
bus_dmamap_sync(txr->txtag, txbuf->map,
|
|
BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(txr->txtag, txbuf->map);
|
|
m_freem(txbuf->m_head);
|
|
txbuf->m_head = NULL;
|
|
}
|
|
/* Clear the EOP index */
|
|
txbuf->eop_index = -1;
|
|
}
|
|
|
|
/* Set number of descriptors available */
|
|
txr->tx_avail = adapter->num_tx_desc;
|
|
|
|
bus_dmamap_sync(txr->txdma.dma_tag, txr->txdma.dma_map,
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
IXV_TX_UNLOCK(txr);
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Initialize all transmit rings.
|
|
*
|
|
**********************************************************************/
|
|
static int
|
|
ixv_setup_transmit_structures(struct adapter *adapter)
|
|
{
|
|
struct tx_ring *txr = adapter->tx_rings;
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++, txr++)
|
|
ixv_setup_transmit_ring(txr);
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Enable transmit unit.
|
|
*
|
|
**********************************************************************/
|
|
static void
|
|
ixv_initialize_transmit_units(struct adapter *adapter)
|
|
{
|
|
struct tx_ring *txr = adapter->tx_rings;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++, txr++) {
|
|
u64 tdba = txr->txdma.dma_paddr;
|
|
u32 txctrl, txdctl;
|
|
|
|
/* Set WTHRESH to 8, burst writeback */
|
|
txdctl = IXGBE_READ_REG(hw, IXGBE_VFTXDCTL(i));
|
|
txdctl |= (8 << 16);
|
|
IXGBE_WRITE_REG(hw, IXGBE_VFTXDCTL(i), txdctl);
|
|
/* Now enable */
|
|
txdctl = IXGBE_READ_REG(hw, IXGBE_VFTXDCTL(i));
|
|
txdctl |= IXGBE_TXDCTL_ENABLE;
|
|
IXGBE_WRITE_REG(hw, IXGBE_VFTXDCTL(i), txdctl);
|
|
|
|
/* Set the HW Tx Head and Tail indices */
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_VFTDH(i), 0);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_VFTDT(i), 0);
|
|
|
|
/* Setup Transmit Descriptor Cmd Settings */
|
|
txr->txd_cmd = IXGBE_TXD_CMD_IFCS;
|
|
txr->watchdog_check = FALSE;
|
|
|
|
/* Set Ring parameters */
|
|
IXGBE_WRITE_REG(hw, IXGBE_VFTDBAL(i),
|
|
(tdba & 0x00000000ffffffffULL));
|
|
IXGBE_WRITE_REG(hw, IXGBE_VFTDBAH(i), (tdba >> 32));
|
|
IXGBE_WRITE_REG(hw, IXGBE_VFTDLEN(i),
|
|
adapter->num_tx_desc *
|
|
sizeof(struct ixgbe_legacy_tx_desc));
|
|
txctrl = IXGBE_READ_REG(hw, IXGBE_VFDCA_TXCTRL(i));
|
|
txctrl &= ~IXGBE_DCA_TXCTRL_DESC_WRO_EN;
|
|
IXGBE_WRITE_REG(hw, IXGBE_VFDCA_TXCTRL(i), txctrl);
|
|
break;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Free all transmit rings.
|
|
*
|
|
**********************************************************************/
|
|
static void
|
|
ixv_free_transmit_structures(struct adapter *adapter)
|
|
{
|
|
struct tx_ring *txr = adapter->tx_rings;
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++, txr++) {
|
|
IXV_TX_LOCK(txr);
|
|
ixv_free_transmit_buffers(txr);
|
|
ixv_dma_free(adapter, &txr->txdma);
|
|
IXV_TX_UNLOCK(txr);
|
|
IXV_TX_LOCK_DESTROY(txr);
|
|
}
|
|
free(adapter->tx_rings, M_DEVBUF);
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Free transmit ring related data structures.
|
|
*
|
|
**********************************************************************/
|
|
static void
|
|
ixv_free_transmit_buffers(struct tx_ring *txr)
|
|
{
|
|
struct adapter *adapter = txr->adapter;
|
|
struct ixv_tx_buf *tx_buffer;
|
|
int i;
|
|
|
|
INIT_DEBUGOUT("free_transmit_ring: begin");
|
|
|
|
if (txr->tx_buffers == NULL)
|
|
return;
|
|
|
|
tx_buffer = txr->tx_buffers;
|
|
for (i = 0; i < adapter->num_tx_desc; i++, tx_buffer++) {
|
|
if (tx_buffer->m_head != NULL) {
|
|
bus_dmamap_sync(txr->txtag, tx_buffer->map,
|
|
BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(txr->txtag,
|
|
tx_buffer->map);
|
|
m_freem(tx_buffer->m_head);
|
|
tx_buffer->m_head = NULL;
|
|
if (tx_buffer->map != NULL) {
|
|
bus_dmamap_destroy(txr->txtag,
|
|
tx_buffer->map);
|
|
tx_buffer->map = NULL;
|
|
}
|
|
} else if (tx_buffer->map != NULL) {
|
|
bus_dmamap_unload(txr->txtag,
|
|
tx_buffer->map);
|
|
bus_dmamap_destroy(txr->txtag,
|
|
tx_buffer->map);
|
|
tx_buffer->map = NULL;
|
|
}
|
|
}
|
|
#if __FreeBSD_version >= 800000
|
|
if (txr->br != NULL)
|
|
buf_ring_free(txr->br, M_DEVBUF);
|
|
#endif
|
|
if (txr->tx_buffers != NULL) {
|
|
free(txr->tx_buffers, M_DEVBUF);
|
|
txr->tx_buffers = NULL;
|
|
}
|
|
if (txr->txtag != NULL) {
|
|
bus_dma_tag_destroy(txr->txtag);
|
|
txr->txtag = NULL;
|
|
}
|
|
return;
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Advanced Context Descriptor setup for VLAN or CSUM
|
|
*
|
|
**********************************************************************/
|
|
|
|
static bool
|
|
ixv_tx_ctx_setup(struct tx_ring *txr, struct mbuf *mp)
|
|
{
|
|
struct adapter *adapter = txr->adapter;
|
|
struct ixgbe_adv_tx_context_desc *TXD;
|
|
struct ixv_tx_buf *tx_buffer;
|
|
u32 vlan_macip_lens = 0, type_tucmd_mlhl = 0;
|
|
struct ether_vlan_header *eh;
|
|
struct ip *ip;
|
|
struct ip6_hdr *ip6;
|
|
int ehdrlen, ip_hlen = 0;
|
|
u16 etype;
|
|
u8 ipproto = 0;
|
|
bool offload = TRUE;
|
|
int ctxd = txr->next_avail_desc;
|
|
u16 vtag = 0;
|
|
|
|
|
|
if ((mp->m_pkthdr.csum_flags & CSUM_OFFLOAD) == 0)
|
|
offload = FALSE;
|
|
|
|
|
|
tx_buffer = &txr->tx_buffers[ctxd];
|
|
TXD = (struct ixgbe_adv_tx_context_desc *) &txr->tx_base[ctxd];
|
|
|
|
/*
|
|
** In advanced descriptors the vlan tag must
|
|
** be placed into the descriptor itself.
|
|
*/
|
|
if (mp->m_flags & M_VLANTAG) {
|
|
vtag = htole16(mp->m_pkthdr.ether_vtag);
|
|
vlan_macip_lens |= (vtag << IXGBE_ADVTXD_VLAN_SHIFT);
|
|
} else if (offload == FALSE)
|
|
return FALSE;
|
|
|
|
/*
|
|
* Determine where frame payload starts.
|
|
* Jump over vlan headers if already present,
|
|
* helpful for QinQ too.
|
|
*/
|
|
eh = mtod(mp, struct ether_vlan_header *);
|
|
if (eh->evl_encap_proto == htons(ETHERTYPE_VLAN)) {
|
|
etype = ntohs(eh->evl_proto);
|
|
ehdrlen = ETHER_HDR_LEN + ETHER_VLAN_ENCAP_LEN;
|
|
} else {
|
|
etype = ntohs(eh->evl_encap_proto);
|
|
ehdrlen = ETHER_HDR_LEN;
|
|
}
|
|
|
|
/* Set the ether header length */
|
|
vlan_macip_lens |= ehdrlen << IXGBE_ADVTXD_MACLEN_SHIFT;
|
|
|
|
switch (etype) {
|
|
case ETHERTYPE_IP:
|
|
ip = (struct ip *)(mp->m_data + ehdrlen);
|
|
ip_hlen = ip->ip_hl << 2;
|
|
if (mp->m_len < ehdrlen + ip_hlen)
|
|
return (FALSE);
|
|
ipproto = ip->ip_p;
|
|
type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_IPV4;
|
|
break;
|
|
case ETHERTYPE_IPV6:
|
|
ip6 = (struct ip6_hdr *)(mp->m_data + ehdrlen);
|
|
ip_hlen = sizeof(struct ip6_hdr);
|
|
if (mp->m_len < ehdrlen + ip_hlen)
|
|
return (FALSE);
|
|
ipproto = ip6->ip6_nxt;
|
|
type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_IPV6;
|
|
break;
|
|
default:
|
|
offload = FALSE;
|
|
break;
|
|
}
|
|
|
|
vlan_macip_lens |= ip_hlen;
|
|
type_tucmd_mlhl |= IXGBE_ADVTXD_DCMD_DEXT | IXGBE_ADVTXD_DTYP_CTXT;
|
|
|
|
switch (ipproto) {
|
|
case IPPROTO_TCP:
|
|
if (mp->m_pkthdr.csum_flags & CSUM_TCP)
|
|
type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_L4T_TCP;
|
|
break;
|
|
|
|
case IPPROTO_UDP:
|
|
if (mp->m_pkthdr.csum_flags & CSUM_UDP)
|
|
type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_L4T_UDP;
|
|
break;
|
|
|
|
#if __FreeBSD_version >= 800000
|
|
case IPPROTO_SCTP:
|
|
if (mp->m_pkthdr.csum_flags & CSUM_SCTP)
|
|
type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_L4T_SCTP;
|
|
break;
|
|
#endif
|
|
default:
|
|
offload = FALSE;
|
|
break;
|
|
}
|
|
|
|
/* Now copy bits into descriptor */
|
|
TXD->vlan_macip_lens |= htole32(vlan_macip_lens);
|
|
TXD->type_tucmd_mlhl |= htole32(type_tucmd_mlhl);
|
|
TXD->seqnum_seed = htole32(0);
|
|
TXD->mss_l4len_idx = htole32(0);
|
|
|
|
tx_buffer->m_head = NULL;
|
|
tx_buffer->eop_index = -1;
|
|
|
|
/* We've consumed the first desc, adjust counters */
|
|
if (++ctxd == adapter->num_tx_desc)
|
|
ctxd = 0;
|
|
txr->next_avail_desc = ctxd;
|
|
--txr->tx_avail;
|
|
|
|
return (offload);
|
|
}
|
|
|
|
/**********************************************************************
|
|
*
|
|
* Setup work for hardware segmentation offload (TSO) on
|
|
* adapters using advanced tx descriptors
|
|
*
|
|
**********************************************************************/
|
|
static bool
|
|
ixv_tso_setup(struct tx_ring *txr, struct mbuf *mp, u32 *paylen)
|
|
{
|
|
struct adapter *adapter = txr->adapter;
|
|
struct ixgbe_adv_tx_context_desc *TXD;
|
|
struct ixv_tx_buf *tx_buffer;
|
|
u32 vlan_macip_lens = 0, type_tucmd_mlhl = 0;
|
|
u32 mss_l4len_idx = 0;
|
|
u16 vtag = 0;
|
|
int ctxd, ehdrlen, hdrlen, ip_hlen, tcp_hlen;
|
|
struct ether_vlan_header *eh;
|
|
struct ip *ip;
|
|
struct tcphdr *th;
|
|
|
|
|
|
/*
|
|
* Determine where frame payload starts.
|
|
* Jump over vlan headers if already present
|
|
*/
|
|
eh = mtod(mp, struct ether_vlan_header *);
|
|
if (eh->evl_encap_proto == htons(ETHERTYPE_VLAN))
|
|
ehdrlen = ETHER_HDR_LEN + ETHER_VLAN_ENCAP_LEN;
|
|
else
|
|
ehdrlen = ETHER_HDR_LEN;
|
|
|
|
/* Ensure we have at least the IP+TCP header in the first mbuf. */
|
|
if (mp->m_len < ehdrlen + sizeof(struct ip) + sizeof(struct tcphdr))
|
|
return FALSE;
|
|
|
|
ctxd = txr->next_avail_desc;
|
|
tx_buffer = &txr->tx_buffers[ctxd];
|
|
TXD = (struct ixgbe_adv_tx_context_desc *) &txr->tx_base[ctxd];
|
|
|
|
ip = (struct ip *)(mp->m_data + ehdrlen);
|
|
if (ip->ip_p != IPPROTO_TCP)
|
|
return FALSE; /* 0 */
|
|
ip->ip_sum = 0;
|
|
ip_hlen = ip->ip_hl << 2;
|
|
th = (struct tcphdr *)((caddr_t)ip + ip_hlen);
|
|
th->th_sum = in_pseudo(ip->ip_src.s_addr,
|
|
ip->ip_dst.s_addr, htons(IPPROTO_TCP));
|
|
tcp_hlen = th->th_off << 2;
|
|
hdrlen = ehdrlen + ip_hlen + tcp_hlen;
|
|
|
|
/* This is used in the transmit desc in encap */
|
|
*paylen = mp->m_pkthdr.len - hdrlen;
|
|
|
|
/* VLAN MACLEN IPLEN */
|
|
if (mp->m_flags & M_VLANTAG) {
|
|
vtag = htole16(mp->m_pkthdr.ether_vtag);
|
|
vlan_macip_lens |= (vtag << IXGBE_ADVTXD_VLAN_SHIFT);
|
|
}
|
|
|
|
vlan_macip_lens |= ehdrlen << IXGBE_ADVTXD_MACLEN_SHIFT;
|
|
vlan_macip_lens |= ip_hlen;
|
|
TXD->vlan_macip_lens |= htole32(vlan_macip_lens);
|
|
|
|
/* ADV DTYPE TUCMD */
|
|
type_tucmd_mlhl |= IXGBE_ADVTXD_DCMD_DEXT | IXGBE_ADVTXD_DTYP_CTXT;
|
|
type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_L4T_TCP;
|
|
type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_IPV4;
|
|
TXD->type_tucmd_mlhl |= htole32(type_tucmd_mlhl);
|
|
|
|
|
|
/* MSS L4LEN IDX */
|
|
mss_l4len_idx |= (mp->m_pkthdr.tso_segsz << IXGBE_ADVTXD_MSS_SHIFT);
|
|
mss_l4len_idx |= (tcp_hlen << IXGBE_ADVTXD_L4LEN_SHIFT);
|
|
TXD->mss_l4len_idx = htole32(mss_l4len_idx);
|
|
|
|
TXD->seqnum_seed = htole32(0);
|
|
tx_buffer->m_head = NULL;
|
|
tx_buffer->eop_index = -1;
|
|
|
|
if (++ctxd == adapter->num_tx_desc)
|
|
ctxd = 0;
|
|
|
|
txr->tx_avail--;
|
|
txr->next_avail_desc = ctxd;
|
|
return TRUE;
|
|
}
|
|
|
|
|
|
/**********************************************************************
|
|
*
|
|
* Examine each tx_buffer in the used queue. If the hardware is done
|
|
* processing the packet then free associated resources. The
|
|
* tx_buffer is put back on the free queue.
|
|
*
|
|
**********************************************************************/
|
|
static bool
|
|
ixv_txeof(struct tx_ring *txr)
|
|
{
|
|
struct adapter *adapter = txr->adapter;
|
|
struct ifnet *ifp = adapter->ifp;
|
|
u32 first, last, done;
|
|
struct ixv_tx_buf *tx_buffer;
|
|
struct ixgbe_legacy_tx_desc *tx_desc, *eop_desc;
|
|
|
|
mtx_assert(&txr->tx_mtx, MA_OWNED);
|
|
|
|
if (txr->tx_avail == adapter->num_tx_desc)
|
|
return FALSE;
|
|
|
|
first = txr->next_to_clean;
|
|
tx_buffer = &txr->tx_buffers[first];
|
|
/* For cleanup we just use legacy struct */
|
|
tx_desc = (struct ixgbe_legacy_tx_desc *)&txr->tx_base[first];
|
|
last = tx_buffer->eop_index;
|
|
if (last == -1)
|
|
return FALSE;
|
|
eop_desc = (struct ixgbe_legacy_tx_desc *)&txr->tx_base[last];
|
|
|
|
/*
|
|
** Get the index of the first descriptor
|
|
** BEYOND the EOP and call that 'done'.
|
|
** I do this so the comparison in the
|
|
** inner while loop below can be simple
|
|
*/
|
|
if (++last == adapter->num_tx_desc) last = 0;
|
|
done = last;
|
|
|
|
bus_dmamap_sync(txr->txdma.dma_tag, txr->txdma.dma_map,
|
|
BUS_DMASYNC_POSTREAD);
|
|
/*
|
|
** Only the EOP descriptor of a packet now has the DD
|
|
** bit set, this is what we look for...
|
|
*/
|
|
while (eop_desc->upper.fields.status & IXGBE_TXD_STAT_DD) {
|
|
/* We clean the range of the packet */
|
|
while (first != done) {
|
|
tx_desc->upper.data = 0;
|
|
tx_desc->lower.data = 0;
|
|
tx_desc->buffer_addr = 0;
|
|
++txr->tx_avail;
|
|
|
|
if (tx_buffer->m_head) {
|
|
bus_dmamap_sync(txr->txtag,
|
|
tx_buffer->map,
|
|
BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(txr->txtag,
|
|
tx_buffer->map);
|
|
m_freem(tx_buffer->m_head);
|
|
tx_buffer->m_head = NULL;
|
|
tx_buffer->map = NULL;
|
|
}
|
|
tx_buffer->eop_index = -1;
|
|
txr->watchdog_time = ticks;
|
|
|
|
if (++first == adapter->num_tx_desc)
|
|
first = 0;
|
|
|
|
tx_buffer = &txr->tx_buffers[first];
|
|
tx_desc =
|
|
(struct ixgbe_legacy_tx_desc *)&txr->tx_base[first];
|
|
}
|
|
++ifp->if_opackets;
|
|
/* See if there is more work now */
|
|
last = tx_buffer->eop_index;
|
|
if (last != -1) {
|
|
eop_desc =
|
|
(struct ixgbe_legacy_tx_desc *)&txr->tx_base[last];
|
|
/* Get next done point */
|
|
if (++last == adapter->num_tx_desc) last = 0;
|
|
done = last;
|
|
} else
|
|
break;
|
|
}
|
|
bus_dmamap_sync(txr->txdma.dma_tag, txr->txdma.dma_map,
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
|
|
txr->next_to_clean = first;
|
|
|
|
/*
|
|
* If we have enough room, clear IFF_DRV_OACTIVE to tell the stack that
|
|
* it is OK to send packets. If there are no pending descriptors,
|
|
* clear the timeout. Otherwise, if some descriptors have been freed,
|
|
* restart the timeout.
|
|
*/
|
|
if (txr->tx_avail > IXV_TX_CLEANUP_THRESHOLD) {
|
|
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
|
|
if (txr->tx_avail == adapter->num_tx_desc) {
|
|
txr->watchdog_check = FALSE;
|
|
return FALSE;
|
|
}
|
|
}
|
|
|
|
return TRUE;
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Refresh mbuf buffers for RX descriptor rings
|
|
* - now keeps its own state so discards due to resource
|
|
* exhaustion are unnecessary, if an mbuf cannot be obtained
|
|
* it just returns, keeping its placeholder, thus it can simply
|
|
* be recalled to try again.
|
|
*
|
|
**********************************************************************/
|
|
static void
|
|
ixv_refresh_mbufs(struct rx_ring *rxr, int limit)
|
|
{
|
|
struct adapter *adapter = rxr->adapter;
|
|
bus_dma_segment_t hseg[1];
|
|
bus_dma_segment_t pseg[1];
|
|
struct ixv_rx_buf *rxbuf;
|
|
struct mbuf *mh, *mp;
|
|
int i, j, nsegs, error;
|
|
bool refreshed = FALSE;
|
|
|
|
i = j = rxr->next_to_refresh;
|
|
/* Get the control variable, one beyond refresh point */
|
|
if (++j == adapter->num_rx_desc)
|
|
j = 0;
|
|
while (j != limit) {
|
|
rxbuf = &rxr->rx_buffers[i];
|
|
if ((rxbuf->m_head == NULL) && (rxr->hdr_split)) {
|
|
mh = m_gethdr(M_NOWAIT, MT_DATA);
|
|
if (mh == NULL)
|
|
goto update;
|
|
mh->m_pkthdr.len = mh->m_len = MHLEN;
|
|
mh->m_len = MHLEN;
|
|
mh->m_flags |= M_PKTHDR;
|
|
m_adj(mh, ETHER_ALIGN);
|
|
/* Get the memory mapping */
|
|
error = bus_dmamap_load_mbuf_sg(rxr->htag,
|
|
rxbuf->hmap, mh, hseg, &nsegs, BUS_DMA_NOWAIT);
|
|
if (error != 0) {
|
|
printf("GET BUF: dmamap load"
|
|
" failure - %d\n", error);
|
|
m_free(mh);
|
|
goto update;
|
|
}
|
|
rxbuf->m_head = mh;
|
|
bus_dmamap_sync(rxr->htag, rxbuf->hmap,
|
|
BUS_DMASYNC_PREREAD);
|
|
rxr->rx_base[i].read.hdr_addr =
|
|
htole64(hseg[0].ds_addr);
|
|
}
|
|
|
|
if (rxbuf->m_pack == NULL) {
|
|
mp = m_getjcl(M_NOWAIT, MT_DATA,
|
|
M_PKTHDR, adapter->rx_mbuf_sz);
|
|
if (mp == NULL)
|
|
goto update;
|
|
} else
|
|
mp = rxbuf->m_pack;
|
|
|
|
mp->m_pkthdr.len = mp->m_len = adapter->rx_mbuf_sz;
|
|
/* Get the memory mapping */
|
|
error = bus_dmamap_load_mbuf_sg(rxr->ptag,
|
|
rxbuf->pmap, mp, pseg, &nsegs, BUS_DMA_NOWAIT);
|
|
if (error != 0) {
|
|
printf("GET BUF: dmamap load"
|
|
" failure - %d\n", error);
|
|
m_free(mp);
|
|
rxbuf->m_pack = NULL;
|
|
goto update;
|
|
}
|
|
rxbuf->m_pack = mp;
|
|
bus_dmamap_sync(rxr->ptag, rxbuf->pmap,
|
|
BUS_DMASYNC_PREREAD);
|
|
rxr->rx_base[i].read.pkt_addr =
|
|
htole64(pseg[0].ds_addr);
|
|
|
|
refreshed = TRUE;
|
|
rxr->next_to_refresh = i = j;
|
|
/* Calculate next index */
|
|
if (++j == adapter->num_rx_desc)
|
|
j = 0;
|
|
}
|
|
update:
|
|
if (refreshed) /* update tail index */
|
|
IXGBE_WRITE_REG(&adapter->hw,
|
|
IXGBE_VFRDT(rxr->me), rxr->next_to_refresh);
|
|
return;
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Allocate memory for rx_buffer structures. Since we use one
|
|
* rx_buffer per received packet, the maximum number of rx_buffer's
|
|
* that we'll need is equal to the number of receive descriptors
|
|
* that we've allocated.
|
|
*
|
|
**********************************************************************/
|
|
static int
|
|
ixv_allocate_receive_buffers(struct rx_ring *rxr)
|
|
{
|
|
struct adapter *adapter = rxr->adapter;
|
|
device_t dev = adapter->dev;
|
|
struct ixv_rx_buf *rxbuf;
|
|
int i, bsize, error;
|
|
|
|
bsize = sizeof(struct ixv_rx_buf) * adapter->num_rx_desc;
|
|
if (!(rxr->rx_buffers =
|
|
(struct ixv_rx_buf *) malloc(bsize,
|
|
M_DEVBUF, M_NOWAIT | M_ZERO))) {
|
|
device_printf(dev, "Unable to allocate rx_buffer memory\n");
|
|
error = ENOMEM;
|
|
goto fail;
|
|
}
|
|
|
|
if ((error = bus_dma_tag_create(bus_get_dma_tag(dev), /* parent */
|
|
1, 0, /* alignment, bounds */
|
|
BUS_SPACE_MAXADDR, /* lowaddr */
|
|
BUS_SPACE_MAXADDR, /* highaddr */
|
|
NULL, NULL, /* filter, filterarg */
|
|
MSIZE, /* maxsize */
|
|
1, /* nsegments */
|
|
MSIZE, /* maxsegsize */
|
|
0, /* flags */
|
|
NULL, /* lockfunc */
|
|
NULL, /* lockfuncarg */
|
|
&rxr->htag))) {
|
|
device_printf(dev, "Unable to create RX DMA tag\n");
|
|
goto fail;
|
|
}
|
|
|
|
if ((error = bus_dma_tag_create(bus_get_dma_tag(dev), /* parent */
|
|
1, 0, /* alignment, bounds */
|
|
BUS_SPACE_MAXADDR, /* lowaddr */
|
|
BUS_SPACE_MAXADDR, /* highaddr */
|
|
NULL, NULL, /* filter, filterarg */
|
|
MJUMPAGESIZE, /* maxsize */
|
|
1, /* nsegments */
|
|
MJUMPAGESIZE, /* maxsegsize */
|
|
0, /* flags */
|
|
NULL, /* lockfunc */
|
|
NULL, /* lockfuncarg */
|
|
&rxr->ptag))) {
|
|
device_printf(dev, "Unable to create RX DMA tag\n");
|
|
goto fail;
|
|
}
|
|
|
|
for (i = 0; i < adapter->num_rx_desc; i++, rxbuf++) {
|
|
rxbuf = &rxr->rx_buffers[i];
|
|
error = bus_dmamap_create(rxr->htag,
|
|
BUS_DMA_NOWAIT, &rxbuf->hmap);
|
|
if (error) {
|
|
device_printf(dev, "Unable to create RX head map\n");
|
|
goto fail;
|
|
}
|
|
error = bus_dmamap_create(rxr->ptag,
|
|
BUS_DMA_NOWAIT, &rxbuf->pmap);
|
|
if (error) {
|
|
device_printf(dev, "Unable to create RX pkt map\n");
|
|
goto fail;
|
|
}
|
|
}
|
|
|
|
return (0);
|
|
|
|
fail:
|
|
/* Frees all, but can handle partial completion */
|
|
ixv_free_receive_structures(adapter);
|
|
return (error);
|
|
}
|
|
|
|
static void
|
|
ixv_free_receive_ring(struct rx_ring *rxr)
|
|
{
|
|
struct adapter *adapter;
|
|
struct ixv_rx_buf *rxbuf;
|
|
int i;
|
|
|
|
adapter = rxr->adapter;
|
|
for (i = 0; i < adapter->num_rx_desc; i++) {
|
|
rxbuf = &rxr->rx_buffers[i];
|
|
if (rxbuf->m_head != NULL) {
|
|
bus_dmamap_sync(rxr->htag, rxbuf->hmap,
|
|
BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(rxr->htag, rxbuf->hmap);
|
|
rxbuf->m_head->m_flags |= M_PKTHDR;
|
|
m_freem(rxbuf->m_head);
|
|
}
|
|
if (rxbuf->m_pack != NULL) {
|
|
bus_dmamap_sync(rxr->ptag, rxbuf->pmap,
|
|
BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(rxr->ptag, rxbuf->pmap);
|
|
rxbuf->m_pack->m_flags |= M_PKTHDR;
|
|
m_freem(rxbuf->m_pack);
|
|
}
|
|
rxbuf->m_head = NULL;
|
|
rxbuf->m_pack = NULL;
|
|
}
|
|
}
|
|
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Initialize a receive ring and its buffers.
|
|
*
|
|
**********************************************************************/
|
|
static int
|
|
ixv_setup_receive_ring(struct rx_ring *rxr)
|
|
{
|
|
struct adapter *adapter;
|
|
struct ifnet *ifp;
|
|
device_t dev;
|
|
struct ixv_rx_buf *rxbuf;
|
|
bus_dma_segment_t pseg[1], hseg[1];
|
|
struct lro_ctrl *lro = &rxr->lro;
|
|
int rsize, nsegs, error = 0;
|
|
|
|
adapter = rxr->adapter;
|
|
ifp = adapter->ifp;
|
|
dev = adapter->dev;
|
|
|
|
/* Clear the ring contents */
|
|
IXV_RX_LOCK(rxr);
|
|
rsize = roundup2(adapter->num_rx_desc *
|
|
sizeof(union ixgbe_adv_rx_desc), DBA_ALIGN);
|
|
bzero((void *)rxr->rx_base, rsize);
|
|
|
|
/* Free current RX buffer structs and their mbufs */
|
|
ixv_free_receive_ring(rxr);
|
|
|
|
/* Configure header split? */
|
|
if (ixv_header_split)
|
|
rxr->hdr_split = TRUE;
|
|
|
|
/* Now replenish the mbufs */
|
|
for (int j = 0; j != adapter->num_rx_desc; ++j) {
|
|
struct mbuf *mh, *mp;
|
|
|
|
rxbuf = &rxr->rx_buffers[j];
|
|
/*
|
|
** Dont allocate mbufs if not
|
|
** doing header split, its wasteful
|
|
*/
|
|
if (rxr->hdr_split == FALSE)
|
|
goto skip_head;
|
|
|
|
/* First the header */
|
|
rxbuf->m_head = m_gethdr(M_NOWAIT, MT_DATA);
|
|
if (rxbuf->m_head == NULL) {
|
|
error = ENOBUFS;
|
|
goto fail;
|
|
}
|
|
m_adj(rxbuf->m_head, ETHER_ALIGN);
|
|
mh = rxbuf->m_head;
|
|
mh->m_len = mh->m_pkthdr.len = MHLEN;
|
|
mh->m_flags |= M_PKTHDR;
|
|
/* Get the memory mapping */
|
|
error = bus_dmamap_load_mbuf_sg(rxr->htag,
|
|
rxbuf->hmap, rxbuf->m_head, hseg,
|
|
&nsegs, BUS_DMA_NOWAIT);
|
|
if (error != 0) /* Nothing elegant to do here */
|
|
goto fail;
|
|
bus_dmamap_sync(rxr->htag,
|
|
rxbuf->hmap, BUS_DMASYNC_PREREAD);
|
|
/* Update descriptor */
|
|
rxr->rx_base[j].read.hdr_addr = htole64(hseg[0].ds_addr);
|
|
|
|
skip_head:
|
|
/* Now the payload cluster */
|
|
rxbuf->m_pack = m_getjcl(M_NOWAIT, MT_DATA,
|
|
M_PKTHDR, adapter->rx_mbuf_sz);
|
|
if (rxbuf->m_pack == NULL) {
|
|
error = ENOBUFS;
|
|
goto fail;
|
|
}
|
|
mp = rxbuf->m_pack;
|
|
mp->m_pkthdr.len = mp->m_len = adapter->rx_mbuf_sz;
|
|
/* Get the memory mapping */
|
|
error = bus_dmamap_load_mbuf_sg(rxr->ptag,
|
|
rxbuf->pmap, mp, pseg,
|
|
&nsegs, BUS_DMA_NOWAIT);
|
|
if (error != 0)
|
|
goto fail;
|
|
bus_dmamap_sync(rxr->ptag,
|
|
rxbuf->pmap, BUS_DMASYNC_PREREAD);
|
|
/* Update descriptor */
|
|
rxr->rx_base[j].read.pkt_addr = htole64(pseg[0].ds_addr);
|
|
}
|
|
|
|
|
|
/* Setup our descriptor indices */
|
|
rxr->next_to_check = 0;
|
|
rxr->next_to_refresh = 0;
|
|
rxr->lro_enabled = FALSE;
|
|
rxr->rx_split_packets = 0;
|
|
rxr->rx_bytes = 0;
|
|
rxr->discard = FALSE;
|
|
|
|
bus_dmamap_sync(rxr->rxdma.dma_tag, rxr->rxdma.dma_map,
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
|
|
/*
|
|
** Now set up the LRO interface:
|
|
*/
|
|
if (ifp->if_capenable & IFCAP_LRO) {
|
|
int err = tcp_lro_init(lro);
|
|
if (err) {
|
|
device_printf(dev, "LRO Initialization failed!\n");
|
|
goto fail;
|
|
}
|
|
INIT_DEBUGOUT("RX Soft LRO Initialized\n");
|
|
rxr->lro_enabled = TRUE;
|
|
lro->ifp = adapter->ifp;
|
|
}
|
|
|
|
IXV_RX_UNLOCK(rxr);
|
|
return (0);
|
|
|
|
fail:
|
|
ixv_free_receive_ring(rxr);
|
|
IXV_RX_UNLOCK(rxr);
|
|
return (error);
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Initialize all receive rings.
|
|
*
|
|
**********************************************************************/
|
|
static int
|
|
ixv_setup_receive_structures(struct adapter *adapter)
|
|
{
|
|
struct rx_ring *rxr = adapter->rx_rings;
|
|
int j;
|
|
|
|
for (j = 0; j < adapter->num_queues; j++, rxr++)
|
|
if (ixv_setup_receive_ring(rxr))
|
|
goto fail;
|
|
|
|
return (0);
|
|
fail:
|
|
/*
|
|
* Free RX buffers allocated so far, we will only handle
|
|
* the rings that completed, the failing case will have
|
|
* cleaned up for itself. 'j' failed, so its the terminus.
|
|
*/
|
|
for (int i = 0; i < j; ++i) {
|
|
rxr = &adapter->rx_rings[i];
|
|
ixv_free_receive_ring(rxr);
|
|
}
|
|
|
|
return (ENOBUFS);
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Setup receive registers and features.
|
|
*
|
|
**********************************************************************/
|
|
#define IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT 2
|
|
|
|
static void
|
|
ixv_initialize_receive_units(struct adapter *adapter)
|
|
{
|
|
struct rx_ring *rxr = adapter->rx_rings;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
struct ifnet *ifp = adapter->ifp;
|
|
u32 bufsz, fctrl, rxcsum, hlreg;
|
|
|
|
|
|
/* Enable broadcasts */
|
|
fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
|
|
fctrl |= IXGBE_FCTRL_BAM;
|
|
fctrl |= IXGBE_FCTRL_DPF;
|
|
fctrl |= IXGBE_FCTRL_PMCF;
|
|
IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl);
|
|
|
|
/* Set for Jumbo Frames? */
|
|
hlreg = IXGBE_READ_REG(hw, IXGBE_HLREG0);
|
|
if (ifp->if_mtu > ETHERMTU) {
|
|
hlreg |= IXGBE_HLREG0_JUMBOEN;
|
|
bufsz = 4096 >> IXGBE_SRRCTL_BSIZEPKT_SHIFT;
|
|
} else {
|
|
hlreg &= ~IXGBE_HLREG0_JUMBOEN;
|
|
bufsz = 2048 >> IXGBE_SRRCTL_BSIZEPKT_SHIFT;
|
|
}
|
|
IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg);
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++, rxr++) {
|
|
u64 rdba = rxr->rxdma.dma_paddr;
|
|
u32 reg, rxdctl;
|
|
|
|
/* Do the queue enabling first */
|
|
rxdctl = IXGBE_READ_REG(hw, IXGBE_VFRXDCTL(i));
|
|
rxdctl |= IXGBE_RXDCTL_ENABLE;
|
|
IXGBE_WRITE_REG(hw, IXGBE_VFRXDCTL(i), rxdctl);
|
|
for (int k = 0; k < 10; k++) {
|
|
if (IXGBE_READ_REG(hw, IXGBE_VFRXDCTL(i)) &
|
|
IXGBE_RXDCTL_ENABLE)
|
|
break;
|
|
else
|
|
msec_delay(1);
|
|
}
|
|
wmb();
|
|
|
|
/* Setup the Base and Length of the Rx Descriptor Ring */
|
|
IXGBE_WRITE_REG(hw, IXGBE_VFRDBAL(i),
|
|
(rdba & 0x00000000ffffffffULL));
|
|
IXGBE_WRITE_REG(hw, IXGBE_VFRDBAH(i),
|
|
(rdba >> 32));
|
|
IXGBE_WRITE_REG(hw, IXGBE_VFRDLEN(i),
|
|
adapter->num_rx_desc * sizeof(union ixgbe_adv_rx_desc));
|
|
|
|
/* Set up the SRRCTL register */
|
|
reg = IXGBE_READ_REG(hw, IXGBE_VFSRRCTL(i));
|
|
reg &= ~IXGBE_SRRCTL_BSIZEHDR_MASK;
|
|
reg &= ~IXGBE_SRRCTL_BSIZEPKT_MASK;
|
|
reg |= bufsz;
|
|
if (rxr->hdr_split) {
|
|
/* Use a standard mbuf for the header */
|
|
reg |= ((IXV_RX_HDR <<
|
|
IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT)
|
|
& IXGBE_SRRCTL_BSIZEHDR_MASK);
|
|
reg |= IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS;
|
|
} else
|
|
reg |= IXGBE_SRRCTL_DESCTYPE_ADV_ONEBUF;
|
|
IXGBE_WRITE_REG(hw, IXGBE_VFSRRCTL(i), reg);
|
|
|
|
/* Setup the HW Rx Head and Tail Descriptor Pointers */
|
|
IXGBE_WRITE_REG(hw, IXGBE_VFRDH(rxr->me), 0);
|
|
IXGBE_WRITE_REG(hw, IXGBE_VFRDT(rxr->me),
|
|
adapter->num_rx_desc - 1);
|
|
}
|
|
|
|
rxcsum = IXGBE_READ_REG(hw, IXGBE_RXCSUM);
|
|
|
|
if (ifp->if_capenable & IFCAP_RXCSUM)
|
|
rxcsum |= IXGBE_RXCSUM_PCSD;
|
|
|
|
if (!(rxcsum & IXGBE_RXCSUM_PCSD))
|
|
rxcsum |= IXGBE_RXCSUM_IPPCSE;
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_RXCSUM, rxcsum);
|
|
|
|
return;
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Free all receive rings.
|
|
*
|
|
**********************************************************************/
|
|
static void
|
|
ixv_free_receive_structures(struct adapter *adapter)
|
|
{
|
|
struct rx_ring *rxr = adapter->rx_rings;
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++, rxr++) {
|
|
struct lro_ctrl *lro = &rxr->lro;
|
|
ixv_free_receive_buffers(rxr);
|
|
/* Free LRO memory */
|
|
tcp_lro_free(lro);
|
|
/* Free the ring memory as well */
|
|
ixv_dma_free(adapter, &rxr->rxdma);
|
|
}
|
|
|
|
free(adapter->rx_rings, M_DEVBUF);
|
|
}
|
|
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Free receive ring data structures
|
|
*
|
|
**********************************************************************/
|
|
static void
|
|
ixv_free_receive_buffers(struct rx_ring *rxr)
|
|
{
|
|
struct adapter *adapter = rxr->adapter;
|
|
struct ixv_rx_buf *rxbuf;
|
|
|
|
INIT_DEBUGOUT("free_receive_structures: begin");
|
|
|
|
/* Cleanup any existing buffers */
|
|
if (rxr->rx_buffers != NULL) {
|
|
for (int i = 0; i < adapter->num_rx_desc; i++) {
|
|
rxbuf = &rxr->rx_buffers[i];
|
|
if (rxbuf->m_head != NULL) {
|
|
bus_dmamap_sync(rxr->htag, rxbuf->hmap,
|
|
BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(rxr->htag, rxbuf->hmap);
|
|
rxbuf->m_head->m_flags |= M_PKTHDR;
|
|
m_freem(rxbuf->m_head);
|
|
}
|
|
if (rxbuf->m_pack != NULL) {
|
|
bus_dmamap_sync(rxr->ptag, rxbuf->pmap,
|
|
BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(rxr->ptag, rxbuf->pmap);
|
|
rxbuf->m_pack->m_flags |= M_PKTHDR;
|
|
m_freem(rxbuf->m_pack);
|
|
}
|
|
rxbuf->m_head = NULL;
|
|
rxbuf->m_pack = NULL;
|
|
if (rxbuf->hmap != NULL) {
|
|
bus_dmamap_destroy(rxr->htag, rxbuf->hmap);
|
|
rxbuf->hmap = NULL;
|
|
}
|
|
if (rxbuf->pmap != NULL) {
|
|
bus_dmamap_destroy(rxr->ptag, rxbuf->pmap);
|
|
rxbuf->pmap = NULL;
|
|
}
|
|
}
|
|
if (rxr->rx_buffers != NULL) {
|
|
free(rxr->rx_buffers, M_DEVBUF);
|
|
rxr->rx_buffers = NULL;
|
|
}
|
|
}
|
|
|
|
if (rxr->htag != NULL) {
|
|
bus_dma_tag_destroy(rxr->htag);
|
|
rxr->htag = NULL;
|
|
}
|
|
if (rxr->ptag != NULL) {
|
|
bus_dma_tag_destroy(rxr->ptag);
|
|
rxr->ptag = NULL;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static __inline void
|
|
ixv_rx_input(struct rx_ring *rxr, struct ifnet *ifp, struct mbuf *m, u32 ptype)
|
|
{
|
|
|
|
/*
|
|
* ATM LRO is only for IPv4/TCP packets and TCP checksum of the packet
|
|
* should be computed by hardware. Also it should not have VLAN tag in
|
|
* ethernet header.
|
|
*/
|
|
if (rxr->lro_enabled &&
|
|
(ifp->if_capenable & IFCAP_VLAN_HWTAGGING) != 0 &&
|
|
(ptype & IXGBE_RXDADV_PKTTYPE_ETQF) == 0 &&
|
|
(ptype & (IXGBE_RXDADV_PKTTYPE_IPV4 | IXGBE_RXDADV_PKTTYPE_TCP)) ==
|
|
(IXGBE_RXDADV_PKTTYPE_IPV4 | IXGBE_RXDADV_PKTTYPE_TCP) &&
|
|
(m->m_pkthdr.csum_flags & (CSUM_DATA_VALID | CSUM_PSEUDO_HDR)) ==
|
|
(CSUM_DATA_VALID | CSUM_PSEUDO_HDR)) {
|
|
/*
|
|
* Send to the stack if:
|
|
** - LRO not enabled, or
|
|
** - no LRO resources, or
|
|
** - lro enqueue fails
|
|
*/
|
|
if (rxr->lro.lro_cnt != 0)
|
|
if (tcp_lro_rx(&rxr->lro, m, 0) == 0)
|
|
return;
|
|
}
|
|
IXV_RX_UNLOCK(rxr);
|
|
(*ifp->if_input)(ifp, m);
|
|
IXV_RX_LOCK(rxr);
|
|
}
|
|
|
|
static __inline void
|
|
ixv_rx_discard(struct rx_ring *rxr, int i)
|
|
{
|
|
struct ixv_rx_buf *rbuf;
|
|
|
|
rbuf = &rxr->rx_buffers[i];
|
|
|
|
if (rbuf->fmp != NULL) {/* Partial chain ? */
|
|
rbuf->fmp->m_flags |= M_PKTHDR;
|
|
m_freem(rbuf->fmp);
|
|
rbuf->fmp = NULL;
|
|
}
|
|
|
|
/*
|
|
** With advanced descriptors the writeback
|
|
** clobbers the buffer addrs, so its easier
|
|
** to just free the existing mbufs and take
|
|
** the normal refresh path to get new buffers
|
|
** and mapping.
|
|
*/
|
|
if (rbuf->m_head) {
|
|
m_free(rbuf->m_head);
|
|
rbuf->m_head = NULL;
|
|
}
|
|
|
|
if (rbuf->m_pack) {
|
|
m_free(rbuf->m_pack);
|
|
rbuf->m_pack = NULL;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
|
|
/*********************************************************************
|
|
*
|
|
* This routine executes in interrupt context. It replenishes
|
|
* the mbufs in the descriptor and sends data which has been
|
|
* dma'ed into host memory to upper layer.
|
|
*
|
|
* We loop at most count times if count is > 0, or until done if
|
|
* count < 0.
|
|
*
|
|
* Return TRUE for more work, FALSE for all clean.
|
|
*********************************************************************/
|
|
static bool
|
|
ixv_rxeof(struct ix_queue *que, int count)
|
|
{
|
|
struct adapter *adapter = que->adapter;
|
|
struct rx_ring *rxr = que->rxr;
|
|
struct ifnet *ifp = adapter->ifp;
|
|
struct lro_ctrl *lro = &rxr->lro;
|
|
struct lro_entry *queued;
|
|
int i, nextp, processed = 0;
|
|
u32 staterr = 0;
|
|
union ixgbe_adv_rx_desc *cur;
|
|
struct ixv_rx_buf *rbuf, *nbuf;
|
|
|
|
IXV_RX_LOCK(rxr);
|
|
|
|
for (i = rxr->next_to_check; count != 0;) {
|
|
struct mbuf *sendmp, *mh, *mp;
|
|
u32 rsc, ptype;
|
|
u16 hlen, plen, hdr, vtag;
|
|
bool eop;
|
|
|
|
/* Sync the ring. */
|
|
bus_dmamap_sync(rxr->rxdma.dma_tag, rxr->rxdma.dma_map,
|
|
BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
|
|
|
|
cur = &rxr->rx_base[i];
|
|
staterr = le32toh(cur->wb.upper.status_error);
|
|
|
|
if ((staterr & IXGBE_RXD_STAT_DD) == 0)
|
|
break;
|
|
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0)
|
|
break;
|
|
|
|
count--;
|
|
sendmp = NULL;
|
|
nbuf = NULL;
|
|
rsc = 0;
|
|
cur->wb.upper.status_error = 0;
|
|
rbuf = &rxr->rx_buffers[i];
|
|
mh = rbuf->m_head;
|
|
mp = rbuf->m_pack;
|
|
|
|
plen = le16toh(cur->wb.upper.length);
|
|
ptype = le32toh(cur->wb.lower.lo_dword.data) &
|
|
IXGBE_RXDADV_PKTTYPE_MASK;
|
|
hdr = le16toh(cur->wb.lower.lo_dword.hs_rss.hdr_info);
|
|
vtag = le16toh(cur->wb.upper.vlan);
|
|
eop = ((staterr & IXGBE_RXD_STAT_EOP) != 0);
|
|
|
|
/* Make sure all parts of a bad packet are discarded */
|
|
if (((staterr & IXGBE_RXDADV_ERR_FRAME_ERR_MASK) != 0) ||
|
|
(rxr->discard)) {
|
|
ifp->if_ierrors++;
|
|
rxr->rx_discarded++;
|
|
if (!eop)
|
|
rxr->discard = TRUE;
|
|
else
|
|
rxr->discard = FALSE;
|
|
ixv_rx_discard(rxr, i);
|
|
goto next_desc;
|
|
}
|
|
|
|
if (!eop) {
|
|
nextp = i + 1;
|
|
if (nextp == adapter->num_rx_desc)
|
|
nextp = 0;
|
|
nbuf = &rxr->rx_buffers[nextp];
|
|
prefetch(nbuf);
|
|
}
|
|
/*
|
|
** The header mbuf is ONLY used when header
|
|
** split is enabled, otherwise we get normal
|
|
** behavior, ie, both header and payload
|
|
** are DMA'd into the payload buffer.
|
|
**
|
|
** Rather than using the fmp/lmp global pointers
|
|
** we now keep the head of a packet chain in the
|
|
** buffer struct and pass this along from one
|
|
** descriptor to the next, until we get EOP.
|
|
*/
|
|
if (rxr->hdr_split && (rbuf->fmp == NULL)) {
|
|
/* This must be an initial descriptor */
|
|
hlen = (hdr & IXGBE_RXDADV_HDRBUFLEN_MASK) >>
|
|
IXGBE_RXDADV_HDRBUFLEN_SHIFT;
|
|
if (hlen > IXV_RX_HDR)
|
|
hlen = IXV_RX_HDR;
|
|
mh->m_len = hlen;
|
|
mh->m_flags |= M_PKTHDR;
|
|
mh->m_next = NULL;
|
|
mh->m_pkthdr.len = mh->m_len;
|
|
/* Null buf pointer so it is refreshed */
|
|
rbuf->m_head = NULL;
|
|
/*
|
|
** Check the payload length, this
|
|
** could be zero if its a small
|
|
** packet.
|
|
*/
|
|
if (plen > 0) {
|
|
mp->m_len = plen;
|
|
mp->m_next = NULL;
|
|
mp->m_flags &= ~M_PKTHDR;
|
|
mh->m_next = mp;
|
|
mh->m_pkthdr.len += mp->m_len;
|
|
/* Null buf pointer so it is refreshed */
|
|
rbuf->m_pack = NULL;
|
|
rxr->rx_split_packets++;
|
|
}
|
|
/*
|
|
** Now create the forward
|
|
** chain so when complete
|
|
** we wont have to.
|
|
*/
|
|
if (eop == 0) {
|
|
/* stash the chain head */
|
|
nbuf->fmp = mh;
|
|
/* Make forward chain */
|
|
if (plen)
|
|
mp->m_next = nbuf->m_pack;
|
|
else
|
|
mh->m_next = nbuf->m_pack;
|
|
} else {
|
|
/* Singlet, prepare to send */
|
|
sendmp = mh;
|
|
if ((adapter->num_vlans) &&
|
|
(staterr & IXGBE_RXD_STAT_VP)) {
|
|
sendmp->m_pkthdr.ether_vtag = vtag;
|
|
sendmp->m_flags |= M_VLANTAG;
|
|
}
|
|
}
|
|
} else {
|
|
/*
|
|
** Either no header split, or a
|
|
** secondary piece of a fragmented
|
|
** split packet.
|
|
*/
|
|
mp->m_len = plen;
|
|
/*
|
|
** See if there is a stored head
|
|
** that determines what we are
|
|
*/
|
|
sendmp = rbuf->fmp;
|
|
rbuf->m_pack = rbuf->fmp = NULL;
|
|
|
|
if (sendmp != NULL) /* secondary frag */
|
|
sendmp->m_pkthdr.len += mp->m_len;
|
|
else {
|
|
/* first desc of a non-ps chain */
|
|
sendmp = mp;
|
|
sendmp->m_flags |= M_PKTHDR;
|
|
sendmp->m_pkthdr.len = mp->m_len;
|
|
if (staterr & IXGBE_RXD_STAT_VP) {
|
|
sendmp->m_pkthdr.ether_vtag = vtag;
|
|
sendmp->m_flags |= M_VLANTAG;
|
|
}
|
|
}
|
|
/* Pass the head pointer on */
|
|
if (eop == 0) {
|
|
nbuf->fmp = sendmp;
|
|
sendmp = NULL;
|
|
mp->m_next = nbuf->m_pack;
|
|
}
|
|
}
|
|
++processed;
|
|
/* Sending this frame? */
|
|
if (eop) {
|
|
sendmp->m_pkthdr.rcvif = ifp;
|
|
ifp->if_ipackets++;
|
|
rxr->rx_packets++;
|
|
/* capture data for AIM */
|
|
rxr->bytes += sendmp->m_pkthdr.len;
|
|
rxr->rx_bytes += sendmp->m_pkthdr.len;
|
|
if ((ifp->if_capenable & IFCAP_RXCSUM) != 0)
|
|
ixv_rx_checksum(staterr, sendmp, ptype);
|
|
#if __FreeBSD_version >= 800000
|
|
sendmp->m_pkthdr.flowid = que->msix;
|
|
sendmp->m_flags |= M_FLOWID;
|
|
#endif
|
|
}
|
|
next_desc:
|
|
bus_dmamap_sync(rxr->rxdma.dma_tag, rxr->rxdma.dma_map,
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
|
|
/* Advance our pointers to the next descriptor. */
|
|
if (++i == adapter->num_rx_desc)
|
|
i = 0;
|
|
|
|
/* Now send to the stack or do LRO */
|
|
if (sendmp != NULL)
|
|
ixv_rx_input(rxr, ifp, sendmp, ptype);
|
|
|
|
/* Every 8 descriptors we go to refresh mbufs */
|
|
if (processed == 8) {
|
|
ixv_refresh_mbufs(rxr, i);
|
|
processed = 0;
|
|
}
|
|
}
|
|
|
|
/* Refresh any remaining buf structs */
|
|
if (ixv_rx_unrefreshed(rxr))
|
|
ixv_refresh_mbufs(rxr, i);
|
|
|
|
rxr->next_to_check = i;
|
|
|
|
/*
|
|
* Flush any outstanding LRO work
|
|
*/
|
|
while ((queued = SLIST_FIRST(&lro->lro_active)) != NULL) {
|
|
SLIST_REMOVE_HEAD(&lro->lro_active, next);
|
|
tcp_lro_flush(lro, queued);
|
|
}
|
|
|
|
IXV_RX_UNLOCK(rxr);
|
|
|
|
/*
|
|
** We still have cleaning to do?
|
|
** Schedule another interrupt if so.
|
|
*/
|
|
if ((staterr & IXGBE_RXD_STAT_DD) != 0) {
|
|
ixv_rearm_queues(adapter, (u64)(1 << que->msix));
|
|
return (TRUE);
|
|
}
|
|
|
|
return (FALSE);
|
|
}
|
|
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Verify that the hardware indicated that the checksum is valid.
|
|
* Inform the stack about the status of checksum so that stack
|
|
* doesn't spend time verifying the checksum.
|
|
*
|
|
*********************************************************************/
|
|
static void
|
|
ixv_rx_checksum(u32 staterr, struct mbuf * mp, u32 ptype)
|
|
{
|
|
u16 status = (u16) staterr;
|
|
u8 errors = (u8) (staterr >> 24);
|
|
bool sctp = FALSE;
|
|
|
|
if ((ptype & IXGBE_RXDADV_PKTTYPE_ETQF) == 0 &&
|
|
(ptype & IXGBE_RXDADV_PKTTYPE_SCTP) != 0)
|
|
sctp = TRUE;
|
|
|
|
if (status & IXGBE_RXD_STAT_IPCS) {
|
|
if (!(errors & IXGBE_RXD_ERR_IPE)) {
|
|
/* IP Checksum Good */
|
|
mp->m_pkthdr.csum_flags = CSUM_IP_CHECKED;
|
|
mp->m_pkthdr.csum_flags |= CSUM_IP_VALID;
|
|
|
|
} else
|
|
mp->m_pkthdr.csum_flags = 0;
|
|
}
|
|
if (status & IXGBE_RXD_STAT_L4CS) {
|
|
u64 type = (CSUM_DATA_VALID | CSUM_PSEUDO_HDR);
|
|
#if __FreeBSD_version >= 800000
|
|
if (sctp)
|
|
type = CSUM_SCTP_VALID;
|
|
#endif
|
|
if (!(errors & IXGBE_RXD_ERR_TCPE)) {
|
|
mp->m_pkthdr.csum_flags |= type;
|
|
if (!sctp)
|
|
mp->m_pkthdr.csum_data = htons(0xffff);
|
|
}
|
|
}
|
|
return;
|
|
}
|
|
|
|
static void
|
|
ixv_setup_vlan_support(struct adapter *adapter)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u32 ctrl, vid, vfta, retry;
|
|
|
|
|
|
/*
|
|
** We get here thru init_locked, meaning
|
|
** a soft reset, this has already cleared
|
|
** the VFTA and other state, so if there
|
|
** have been no vlan's registered do nothing.
|
|
*/
|
|
if (adapter->num_vlans == 0)
|
|
return;
|
|
|
|
/* Enable the queues */
|
|
for (int i = 0; i < adapter->num_queues; i++) {
|
|
ctrl = IXGBE_READ_REG(hw, IXGBE_VFRXDCTL(i));
|
|
ctrl |= IXGBE_RXDCTL_VME;
|
|
IXGBE_WRITE_REG(hw, IXGBE_VFRXDCTL(i), ctrl);
|
|
}
|
|
|
|
/*
|
|
** A soft reset zero's out the VFTA, so
|
|
** we need to repopulate it now.
|
|
*/
|
|
for (int i = 0; i < VFTA_SIZE; i++) {
|
|
if (ixv_shadow_vfta[i] == 0)
|
|
continue;
|
|
vfta = ixv_shadow_vfta[i];
|
|
/*
|
|
** Reconstruct the vlan id's
|
|
** based on the bits set in each
|
|
** of the array ints.
|
|
*/
|
|
for ( int j = 0; j < 32; j++) {
|
|
retry = 0;
|
|
if ((vfta & (1 << j)) == 0)
|
|
continue;
|
|
vid = (i * 32) + j;
|
|
/* Call the shared code mailbox routine */
|
|
while (ixgbe_set_vfta(hw, vid, 0, TRUE)) {
|
|
if (++retry > 5)
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
** This routine is run via an vlan config EVENT,
|
|
** it enables us to use the HW Filter table since
|
|
** we can get the vlan id. This just creates the
|
|
** entry in the soft version of the VFTA, init will
|
|
** repopulate the real table.
|
|
*/
|
|
static void
|
|
ixv_register_vlan(void *arg, struct ifnet *ifp, u16 vtag)
|
|
{
|
|
struct adapter *adapter = ifp->if_softc;
|
|
u16 index, bit;
|
|
|
|
if (ifp->if_softc != arg) /* Not our event */
|
|
return;
|
|
|
|
if ((vtag == 0) || (vtag > 4095)) /* Invalid */
|
|
return;
|
|
|
|
IXV_CORE_LOCK(adapter);
|
|
index = (vtag >> 5) & 0x7F;
|
|
bit = vtag & 0x1F;
|
|
ixv_shadow_vfta[index] |= (1 << bit);
|
|
++adapter->num_vlans;
|
|
/* Re-init to load the changes */
|
|
ixv_init_locked(adapter);
|
|
IXV_CORE_UNLOCK(adapter);
|
|
}
|
|
|
|
/*
|
|
** This routine is run via an vlan
|
|
** unconfig EVENT, remove our entry
|
|
** in the soft vfta.
|
|
*/
|
|
static void
|
|
ixv_unregister_vlan(void *arg, struct ifnet *ifp, u16 vtag)
|
|
{
|
|
struct adapter *adapter = ifp->if_softc;
|
|
u16 index, bit;
|
|
|
|
if (ifp->if_softc != arg)
|
|
return;
|
|
|
|
if ((vtag == 0) || (vtag > 4095)) /* Invalid */
|
|
return;
|
|
|
|
IXV_CORE_LOCK(adapter);
|
|
index = (vtag >> 5) & 0x7F;
|
|
bit = vtag & 0x1F;
|
|
ixv_shadow_vfta[index] &= ~(1 << bit);
|
|
--adapter->num_vlans;
|
|
/* Re-init to load the changes */
|
|
ixv_init_locked(adapter);
|
|
IXV_CORE_UNLOCK(adapter);
|
|
}
|
|
|
|
static void
|
|
ixv_enable_intr(struct adapter *adapter)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
struct ix_queue *que = adapter->queues;
|
|
u32 mask = (IXGBE_EIMS_ENABLE_MASK & ~IXGBE_EIMS_RTX_QUEUE);
|
|
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_VTEIMS, mask);
|
|
|
|
mask = IXGBE_EIMS_ENABLE_MASK;
|
|
mask &= ~(IXGBE_EIMS_OTHER | IXGBE_EIMS_LSC);
|
|
IXGBE_WRITE_REG(hw, IXGBE_VTEIAC, mask);
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++, que++)
|
|
ixv_enable_queue(adapter, que->msix);
|
|
|
|
IXGBE_WRITE_FLUSH(hw);
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
ixv_disable_intr(struct adapter *adapter)
|
|
{
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_VTEIAC, 0);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_VTEIMC, ~0);
|
|
IXGBE_WRITE_FLUSH(&adapter->hw);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
** Setup the correct IVAR register for a particular MSIX interrupt
|
|
** - entry is the register array entry
|
|
** - vector is the MSIX vector for this queue
|
|
** - type is RX/TX/MISC
|
|
*/
|
|
static void
|
|
ixv_set_ivar(struct adapter *adapter, u8 entry, u8 vector, s8 type)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u32 ivar, index;
|
|
|
|
vector |= IXGBE_IVAR_ALLOC_VAL;
|
|
|
|
if (type == -1) { /* MISC IVAR */
|
|
ivar = IXGBE_READ_REG(hw, IXGBE_VTIVAR_MISC);
|
|
ivar &= ~0xFF;
|
|
ivar |= vector;
|
|
IXGBE_WRITE_REG(hw, IXGBE_VTIVAR_MISC, ivar);
|
|
} else { /* RX/TX IVARS */
|
|
index = (16 * (entry & 1)) + (8 * type);
|
|
ivar = IXGBE_READ_REG(hw, IXGBE_VTIVAR(entry >> 1));
|
|
ivar &= ~(0xFF << index);
|
|
ivar |= (vector << index);
|
|
IXGBE_WRITE_REG(hw, IXGBE_VTIVAR(entry >> 1), ivar);
|
|
}
|
|
}
|
|
|
|
static void
|
|
ixv_configure_ivars(struct adapter *adapter)
|
|
{
|
|
struct ix_queue *que = adapter->queues;
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++, que++) {
|
|
/* First the RX queue entry */
|
|
ixv_set_ivar(adapter, i, que->msix, 0);
|
|
/* ... and the TX */
|
|
ixv_set_ivar(adapter, i, que->msix, 1);
|
|
/* Set an initial value in EITR */
|
|
IXGBE_WRITE_REG(&adapter->hw,
|
|
IXGBE_VTEITR(que->msix), IXV_EITR_DEFAULT);
|
|
}
|
|
|
|
/* For the Link interrupt */
|
|
ixv_set_ivar(adapter, 1, adapter->mbxvec, -1);
|
|
}
|
|
|
|
|
|
/*
|
|
** Tasklet handler for MSIX MBX interrupts
|
|
** - do outside interrupt since it might sleep
|
|
*/
|
|
static void
|
|
ixv_handle_mbx(void *context, int pending)
|
|
{
|
|
struct adapter *adapter = context;
|
|
|
|
ixgbe_check_link(&adapter->hw,
|
|
&adapter->link_speed, &adapter->link_up, 0);
|
|
ixv_update_link_status(adapter);
|
|
}
|
|
|
|
/*
|
|
** The VF stats registers never have a truely virgin
|
|
** starting point, so this routine tries to make an
|
|
** artificial one, marking ground zero on attach as
|
|
** it were.
|
|
*/
|
|
static void
|
|
ixv_save_stats(struct adapter *adapter)
|
|
{
|
|
if (adapter->stats.vfgprc || adapter->stats.vfgptc) {
|
|
adapter->stats.saved_reset_vfgprc +=
|
|
adapter->stats.vfgprc - adapter->stats.base_vfgprc;
|
|
adapter->stats.saved_reset_vfgptc +=
|
|
adapter->stats.vfgptc - adapter->stats.base_vfgptc;
|
|
adapter->stats.saved_reset_vfgorc +=
|
|
adapter->stats.vfgorc - adapter->stats.base_vfgorc;
|
|
adapter->stats.saved_reset_vfgotc +=
|
|
adapter->stats.vfgotc - adapter->stats.base_vfgotc;
|
|
adapter->stats.saved_reset_vfmprc +=
|
|
adapter->stats.vfmprc - adapter->stats.base_vfmprc;
|
|
}
|
|
}
|
|
|
|
static void
|
|
ixv_init_stats(struct adapter *adapter)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
|
|
adapter->stats.last_vfgprc = IXGBE_READ_REG(hw, IXGBE_VFGPRC);
|
|
adapter->stats.last_vfgorc = IXGBE_READ_REG(hw, IXGBE_VFGORC_LSB);
|
|
adapter->stats.last_vfgorc |=
|
|
(((u64)(IXGBE_READ_REG(hw, IXGBE_VFGORC_MSB))) << 32);
|
|
|
|
adapter->stats.last_vfgptc = IXGBE_READ_REG(hw, IXGBE_VFGPTC);
|
|
adapter->stats.last_vfgotc = IXGBE_READ_REG(hw, IXGBE_VFGOTC_LSB);
|
|
adapter->stats.last_vfgotc |=
|
|
(((u64)(IXGBE_READ_REG(hw, IXGBE_VFGOTC_MSB))) << 32);
|
|
|
|
adapter->stats.last_vfmprc = IXGBE_READ_REG(hw, IXGBE_VFMPRC);
|
|
|
|
adapter->stats.base_vfgprc = adapter->stats.last_vfgprc;
|
|
adapter->stats.base_vfgorc = adapter->stats.last_vfgorc;
|
|
adapter->stats.base_vfgptc = adapter->stats.last_vfgptc;
|
|
adapter->stats.base_vfgotc = adapter->stats.last_vfgotc;
|
|
adapter->stats.base_vfmprc = adapter->stats.last_vfmprc;
|
|
}
|
|
|
|
#define UPDATE_STAT_32(reg, last, count) \
|
|
{ \
|
|
u32 current = IXGBE_READ_REG(hw, reg); \
|
|
if (current < last) \
|
|
count += 0x100000000LL; \
|
|
last = current; \
|
|
count &= 0xFFFFFFFF00000000LL; \
|
|
count |= current; \
|
|
}
|
|
|
|
#define UPDATE_STAT_36(lsb, msb, last, count) \
|
|
{ \
|
|
u64 cur_lsb = IXGBE_READ_REG(hw, lsb); \
|
|
u64 cur_msb = IXGBE_READ_REG(hw, msb); \
|
|
u64 current = ((cur_msb << 32) | cur_lsb); \
|
|
if (current < last) \
|
|
count += 0x1000000000LL; \
|
|
last = current; \
|
|
count &= 0xFFFFFFF000000000LL; \
|
|
count |= current; \
|
|
}
|
|
|
|
/*
|
|
** ixv_update_stats - Update the board statistics counters.
|
|
*/
|
|
void
|
|
ixv_update_stats(struct adapter *adapter)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
|
|
UPDATE_STAT_32(IXGBE_VFGPRC, adapter->stats.last_vfgprc,
|
|
adapter->stats.vfgprc);
|
|
UPDATE_STAT_32(IXGBE_VFGPTC, adapter->stats.last_vfgptc,
|
|
adapter->stats.vfgptc);
|
|
UPDATE_STAT_36(IXGBE_VFGORC_LSB, IXGBE_VFGORC_MSB,
|
|
adapter->stats.last_vfgorc, adapter->stats.vfgorc);
|
|
UPDATE_STAT_36(IXGBE_VFGOTC_LSB, IXGBE_VFGOTC_MSB,
|
|
adapter->stats.last_vfgotc, adapter->stats.vfgotc);
|
|
UPDATE_STAT_32(IXGBE_VFMPRC, adapter->stats.last_vfmprc,
|
|
adapter->stats.vfmprc);
|
|
}
|
|
|
|
/**********************************************************************
|
|
*
|
|
* This routine is called only when ixgbe_display_debug_stats is enabled.
|
|
* This routine provides a way to take a look at important statistics
|
|
* maintained by the driver and hardware.
|
|
*
|
|
**********************************************************************/
|
|
static void
|
|
ixv_print_hw_stats(struct adapter * adapter)
|
|
{
|
|
device_t dev = adapter->dev;
|
|
|
|
device_printf(dev,"Std Mbuf Failed = %lu\n",
|
|
adapter->mbuf_defrag_failed);
|
|
device_printf(dev,"Driver dropped packets = %lu\n",
|
|
adapter->dropped_pkts);
|
|
device_printf(dev, "watchdog timeouts = %ld\n",
|
|
adapter->watchdog_events);
|
|
|
|
device_printf(dev,"Good Packets Rcvd = %llu\n",
|
|
(long long)adapter->stats.vfgprc);
|
|
device_printf(dev,"Good Packets Xmtd = %llu\n",
|
|
(long long)adapter->stats.vfgptc);
|
|
device_printf(dev,"TSO Transmissions = %lu\n",
|
|
adapter->tso_tx);
|
|
|
|
}
|
|
|
|
/**********************************************************************
|
|
*
|
|
* This routine is called only when em_display_debug_stats is enabled.
|
|
* This routine provides a way to take a look at important statistics
|
|
* maintained by the driver and hardware.
|
|
*
|
|
**********************************************************************/
|
|
static void
|
|
ixv_print_debug_info(struct adapter *adapter)
|
|
{
|
|
device_t dev = adapter->dev;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
struct ix_queue *que = adapter->queues;
|
|
struct rx_ring *rxr;
|
|
struct tx_ring *txr;
|
|
struct lro_ctrl *lro;
|
|
|
|
device_printf(dev,"Error Byte Count = %u \n",
|
|
IXGBE_READ_REG(hw, IXGBE_ERRBC));
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++, que++) {
|
|
txr = que->txr;
|
|
rxr = que->rxr;
|
|
lro = &rxr->lro;
|
|
device_printf(dev,"QUE(%d) IRQs Handled: %lu\n",
|
|
que->msix, (long)que->irqs);
|
|
device_printf(dev,"RX(%d) Packets Received: %lld\n",
|
|
rxr->me, (long long)rxr->rx_packets);
|
|
device_printf(dev,"RX(%d) Split RX Packets: %lld\n",
|
|
rxr->me, (long long)rxr->rx_split_packets);
|
|
device_printf(dev,"RX(%d) Bytes Received: %lu\n",
|
|
rxr->me, (long)rxr->rx_bytes);
|
|
device_printf(dev,"RX(%d) LRO Queued= %d\n",
|
|
rxr->me, lro->lro_queued);
|
|
device_printf(dev,"RX(%d) LRO Flushed= %d\n",
|
|
rxr->me, lro->lro_flushed);
|
|
device_printf(dev,"TX(%d) Packets Sent: %lu\n",
|
|
txr->me, (long)txr->total_packets);
|
|
device_printf(dev,"TX(%d) NO Desc Avail: %lu\n",
|
|
txr->me, (long)txr->no_desc_avail);
|
|
}
|
|
|
|
device_printf(dev,"MBX IRQ Handled: %lu\n",
|
|
(long)adapter->mbx_irq);
|
|
return;
|
|
}
|
|
|
|
static int
|
|
ixv_sysctl_stats(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
int error;
|
|
int result;
|
|
struct adapter *adapter;
|
|
|
|
result = -1;
|
|
error = sysctl_handle_int(oidp, &result, 0, req);
|
|
|
|
if (error || !req->newptr)
|
|
return (error);
|
|
|
|
if (result == 1) {
|
|
adapter = (struct adapter *) arg1;
|
|
ixv_print_hw_stats(adapter);
|
|
}
|
|
return error;
|
|
}
|
|
|
|
static int
|
|
ixv_sysctl_debug(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
int error, result;
|
|
struct adapter *adapter;
|
|
|
|
result = -1;
|
|
error = sysctl_handle_int(oidp, &result, 0, req);
|
|
|
|
if (error || !req->newptr)
|
|
return (error);
|
|
|
|
if (result == 1) {
|
|
adapter = (struct adapter *) arg1;
|
|
ixv_print_debug_info(adapter);
|
|
}
|
|
return error;
|
|
}
|
|
|
|
/*
|
|
** Set flow control using sysctl:
|
|
** Flow control values:
|
|
** 0 - off
|
|
** 1 - rx pause
|
|
** 2 - tx pause
|
|
** 3 - full
|
|
*/
|
|
static int
|
|
ixv_set_flowcntl(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
int error;
|
|
struct adapter *adapter;
|
|
|
|
error = sysctl_handle_int(oidp, &ixv_flow_control, 0, req);
|
|
|
|
if (error)
|
|
return (error);
|
|
|
|
adapter = (struct adapter *) arg1;
|
|
switch (ixv_flow_control) {
|
|
case ixgbe_fc_rx_pause:
|
|
case ixgbe_fc_tx_pause:
|
|
case ixgbe_fc_full:
|
|
adapter->hw.fc.requested_mode = ixv_flow_control;
|
|
break;
|
|
case ixgbe_fc_none:
|
|
default:
|
|
adapter->hw.fc.requested_mode = ixgbe_fc_none;
|
|
}
|
|
|
|
ixgbe_fc_enable(&adapter->hw);
|
|
return error;
|
|
}
|
|
|
|
static void
|
|
ixv_add_rx_process_limit(struct adapter *adapter, const char *name,
|
|
const char *description, int *limit, int value)
|
|
{
|
|
*limit = value;
|
|
SYSCTL_ADD_INT(device_get_sysctl_ctx(adapter->dev),
|
|
SYSCTL_CHILDREN(device_get_sysctl_tree(adapter->dev)),
|
|
OID_AUTO, name, CTLTYPE_INT|CTLFLAG_RW, limit, value, description);
|
|
}
|
|
|