3dc0f562f8
while using LSI RAID adapters as it was completely obscure before: mfi has no TRIM support at all and mrsas provides TRIM if underlying adapter does it (for Non-RAID drives generally).
410 lines
9.9 KiB
Groff
410 lines
9.9 KiB
Groff
.\" Copyright (c) 2014 LSI Corp
|
|
.\" All rights reserved.
|
|
.\" Author: Kashyap Desai
|
|
.\" Support: freebsdraid@lsi.com
|
|
.\"
|
|
.\" Redistribution and use in source and binary forms, with or without
|
|
.\" modification, are permitted provided that the following conditions
|
|
.\" are met:
|
|
.\" 1. Redistributions of source code must retain the above copyright
|
|
.\" notice, this list of conditions and the following disclaimer.
|
|
.\" 2. Redistributions in binary form must reproduce the above copyright
|
|
.\" notice, this list of conditions and the following disclaimer in the
|
|
.\" documentation and/or other materials provided with the distribution.
|
|
.\" 3. Neither the name of the <ORGANIZATION> nor the names of its
|
|
.\" contributors may be used to endorse or promote products derived
|
|
.\" from this software without specific prior written permission.
|
|
.\"
|
|
.\" THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
.\" "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
.\" LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
.\" FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
.\" COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
.\" BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
|
.\" LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
.\" CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
.\" ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
.\" POSSIBILITY OF SUCH DAMAGE.
|
|
.\"
|
|
.\" The views and conclusions contained in the software and documentation
|
|
.\" are those of the authors and should not be interpreted as representing
|
|
.\" official policies, either expressed or implied, of the FreeBSD Project.
|
|
.\"
|
|
.\" $FreeBSD$
|
|
.\"
|
|
.Dd Mar 13, 2019
|
|
.Dt MRSAS 4
|
|
.Os
|
|
.Sh NAME
|
|
.Nm mrsas
|
|
.Nd "LSI MegaRAID 6Gb/s and 12Gb/s SAS+SATA RAID controller driver"
|
|
.Sh SYNOPSIS
|
|
To compile this driver into the kernel,
|
|
place the following lines in your
|
|
kernel configuration file:
|
|
.Bd -ragged -offset indent
|
|
.Cd "device pci"
|
|
.Cd "device mrsas"
|
|
.Ed
|
|
.Pp
|
|
Alternatively, to load the driver as a
|
|
module at boot time, place the following line in
|
|
.Xr loader.conf 5 :
|
|
.Bd -literal -offset indent
|
|
mrsas_load="YES"
|
|
.Ed
|
|
.Sh DESCRIPTION
|
|
The
|
|
.Nm
|
|
driver will detect LSI's next generation (6Gb/s and 12Gb/s) PCI Express
|
|
SAS/SATA RAID controllers.
|
|
See the
|
|
.Nm HARDWARE
|
|
section for the supported devices list.
|
|
A disk (virtual disk/physical disk) attached to the
|
|
.Nm
|
|
driver will be visible to the user through
|
|
.Xr camcontrol 8
|
|
as
|
|
.Pa /dev/da?
|
|
device nodes.
|
|
A simple management interface is also provided on a per-controller basis via the
|
|
.Pa /dev/mrsas?
|
|
device node.
|
|
.Pp
|
|
The
|
|
.Nm
|
|
name is derived from the phrase "MegaRAID SAS HBA", which is
|
|
substantially different than the old "MegaRAID" Driver
|
|
.Xr mfi 4
|
|
which does not connect targets
|
|
to the
|
|
.Xr cam 4
|
|
layer and thus requires a new driver which attaches targets to the
|
|
.Xr cam 4
|
|
layer.
|
|
Older MegaRAID controllers are supported by
|
|
.Xr mfi 4
|
|
and will not work with
|
|
.Nm ,
|
|
but both the
|
|
.Xr mfi 4
|
|
and
|
|
.Nm
|
|
drivers can detect and manage the LSI MegaRAID SAS 2208/2308/3008/3108 series of
|
|
controllers.
|
|
.Pp
|
|
The
|
|
.Xr device.hints 5
|
|
option is provided to tune the
|
|
.Nm
|
|
driver's behavior for LSI MegaRAID SAS 2208/2308/3008/3108 controllers.
|
|
By default, the
|
|
.Xr mfi 4
|
|
driver will detect these controllers.
|
|
See the
|
|
.Nm PRIORITY
|
|
section to know more about driver priority for MR-Fusion devices.
|
|
.Pp
|
|
.Nm
|
|
will provide a priority of (-30) (between
|
|
.Dv BUS_PROBE_DEFAULT
|
|
and
|
|
.Dv BUS_PROBE_LOW_PRIORITY )
|
|
at probe call for device id's 0x005B, 0x005D, and
|
|
0x005F so that
|
|
.Nm
|
|
does not take control of these devices without user intervention.
|
|
.Pp
|
|
Solid-state drives (SSD) get ATA TRIM support with
|
|
.Nm
|
|
if underlying adapter allows it.
|
|
This may require configuring SSD as Non-RAID drive
|
|
rather then JBOD virtual mode.
|
|
.Sh HARDWARE
|
|
The
|
|
.Nm
|
|
driver supports the following hardware:
|
|
.Pp
|
|
[ Thunderbolt 6Gb/s MR controller ]
|
|
.Bl -bullet -compact
|
|
.It
|
|
LSI MegaRAID SAS 9265
|
|
.It
|
|
LSI MegaRAID SAS 9266
|
|
.It
|
|
LSI MegaRAID SAS 9267
|
|
.It
|
|
LSI MegaRAID SAS 9270
|
|
.It
|
|
LSI MegaRAID SAS 9271
|
|
.It
|
|
LSI MegaRAID SAS 9272
|
|
.It
|
|
LSI MegaRAID SAS 9285
|
|
.It
|
|
LSI MegaRAID SAS 9286
|
|
.It
|
|
DELL PERC H810
|
|
.It
|
|
DELL PERC H710/P
|
|
.El
|
|
.Pp
|
|
[ Invader/Fury 12Gb/s MR controller ]
|
|
.Bl -bullet -compact
|
|
.It
|
|
LSI MegaRAID SAS 9380
|
|
.It
|
|
LSI MegaRAID SAS 9361
|
|
.It
|
|
LSI MegaRAID SAS 9341
|
|
.It
|
|
DELL PERC H830
|
|
.It
|
|
DELL PERC H730/P
|
|
.It
|
|
DELL PERC H330
|
|
.El
|
|
.Sh CONFIGURATION
|
|
To disable Online Controller Reset(OCR) for a specific
|
|
.Nm
|
|
driver instance, set the
|
|
following tunable value in
|
|
.Xr loader.conf 5 :
|
|
.Bd -literal -offset indent
|
|
dev.mrsas.X.disable_ocr=1
|
|
.Ed
|
|
.Pp
|
|
where X is the adapter number.
|
|
.Pp
|
|
To change the I/O timeout value for a specific
|
|
.Nm
|
|
driver instance, set the following tunable value in
|
|
.Xr loader.conf 5 :
|
|
.Bd -literal -offset indent
|
|
dev.mrsas.X.mrsas_io_timeout=NNNNNN
|
|
.Ed
|
|
.Pp
|
|
where NNNNNN is the timeout value in milli-seconds.
|
|
.Pp
|
|
To change the firmware fault check timer value for a specific
|
|
.Nm
|
|
driver instance, set the following tunable value in
|
|
.Xr loader.conf 5 :
|
|
.Bd -literal -offset indent
|
|
dev.mrsas.X.mrsas_fw_fault_check_delay=NN
|
|
.Ed
|
|
.Pp
|
|
where NN is the fault check delay value in seconds.
|
|
.Pp
|
|
The current number of active I/O commands is shown in the
|
|
.Va dev.mrsas.X.fw_outstanding
|
|
.Xr sysctl 8
|
|
variable.
|
|
.Sh DEBUGGING
|
|
To enable debugging prints from the
|
|
.Nm
|
|
driver, set the
|
|
.Va hw.mrsas.X.debug_level
|
|
variable, where X is the adapter number, either in
|
|
.Xr loader.conf 5
|
|
or via
|
|
.Xr sysctl 8 .
|
|
The following bits have the described effects:
|
|
.Bl -tag -width indent -offset indent
|
|
.It 0x01
|
|
Enable informational prints.
|
|
.It 0x02
|
|
Enable tracing prints.
|
|
.It 0x04
|
|
Enable prints for driver faults.
|
|
.It 0x08
|
|
Enable prints for OCR and I/O timeout.
|
|
.It 0x10
|
|
Enable prints for AEN events.
|
|
.El
|
|
.Sh PRIORITY
|
|
The
|
|
.Nm
|
|
driver will always set a default (-30) priority in the PCI subsystem for
|
|
selection of MR-Fusion cards.
|
|
(It is between
|
|
.Dv BUS_PROBE_DEFAULT
|
|
and
|
|
.Dv BUS_PROBE_LOW_PRIORITY ) .
|
|
MR-Fusion Controllers include all cards with the
|
|
Device IDs -
|
|
0x005B,
|
|
0x005D,
|
|
0x005F.
|
|
.Pp
|
|
The
|
|
.Xr mfi 4
|
|
driver will set a priority of either
|
|
.Dv BUS_PROBE_DEFAULT
|
|
or
|
|
.Dv BUS_PROBE_LOW_PRIORITY
|
|
(depending on the device.hints setting) in the PCI
|
|
subsystem for selection of MR-Fusion cards.
|
|
With the above design in place, the
|
|
.Xr mfi 4
|
|
driver will attach to a MR-Fusion card given that it has a higher priority than
|
|
.Nm .
|
|
.Pp
|
|
Using
|
|
.Pa /boot/device.hints
|
|
(as mentioned below), the user can provide a preference
|
|
for the
|
|
.Nm
|
|
driver to detect a MR-Fusion card instead of the
|
|
.Xr mfi 4
|
|
driver.
|
|
.Bd -ragged -offset indent
|
|
.Cd hw.mfi.mrsas_enable="1"
|
|
.Ed
|
|
.Pp
|
|
At boot time, the
|
|
.Xr mfi 4
|
|
driver will get priority to detect MR-Fusion controllers by default.
|
|
Before
|
|
changing this default driver selection policy, LSI advises users to understand
|
|
how the driver selection policy works.
|
|
LSI's policy is to provide priority to
|
|
the
|
|
.Xr mfi 4
|
|
driver to detect MR-Fusion cards, but allow for the ability to choose the
|
|
.Nm
|
|
driver to detect MR-Fusion cards.
|
|
.Pp
|
|
LSI recommends setting hw.mfi.mrsas_enable="0" for customers who are using the
|
|
older
|
|
.Xr mfi 4
|
|
driver and do not want to switch to
|
|
.Nm .
|
|
For those customers who are using a MR-Fusion controller for the first time, LSI
|
|
recommends using the
|
|
.Nm
|
|
driver and setting hw.mfi.mrsas_enable="1".
|
|
.Pp
|
|
Changing the default behavior is well tested under most conditions, but
|
|
unexpected behavior may pop up if more complex and unrealistic operations are
|
|
executed by switching between the
|
|
.Xr mfi 4
|
|
and
|
|
.Nm
|
|
drivers for MR-Fusion.
|
|
Switching drivers is designed to happen only one time.
|
|
Although multiple
|
|
switching is possible, it is not recommended.
|
|
The user should decide from
|
|
.Nm Start of Day
|
|
which driver they want to use for the MR-Fusion card.
|
|
.Pp
|
|
The user may see different device names when switching from
|
|
.Xr mfi 4
|
|
to
|
|
.Nm .
|
|
This behavior is
|
|
.Nm Functions As Designed
|
|
and the user needs to change the
|
|
.Xr fstab 5
|
|
entry manually if they are doing any experiments with
|
|
.Xr mfi 4
|
|
and
|
|
.Nm
|
|
interoperability.
|
|
.Sh FILES
|
|
.Bl -tag -width ".Pa /dev/mrsas?" -compact
|
|
.It Pa /dev/da?
|
|
array/logical disk interface
|
|
.It Pa /dev/mrsas?
|
|
management interface
|
|
.El
|
|
.Sh SEE ALSO
|
|
.Xr cam 4 ,
|
|
.Xr mfi 4 ,
|
|
.Xr pci 4 ,
|
|
.Xr device.hints 5 ,
|
|
.Xr camcontrol 8
|
|
.Sh HISTORY
|
|
The
|
|
.Nm
|
|
driver first appeared in
|
|
.Fx 10.1 .
|
|
.Bd -ragged
|
|
.Cd "mfi Driver:"
|
|
.Xr mfi 4
|
|
is the old
|
|
.Fx
|
|
driver which started with support for Gen-1 Controllers and
|
|
was extended to support up to MR-Fusion (Device ID = 0x005B, 0x005D, 0x005F).
|
|
.Ed
|
|
.Bd -ragged
|
|
.Cd "mrsas Driver:"
|
|
.Nm
|
|
is the new driver reworked by LSI which supports Thunderbolt and onward
|
|
products.
|
|
The SAS+SATA RAID controller with device id 0x005b is referred to as
|
|
the Thunderbolt controller throughout this man page.
|
|
.Ed
|
|
.Bd -ragged
|
|
.Nm cam aware HBA drivers:
|
|
.Fx
|
|
has a
|
|
.Xr cam 4
|
|
layer which attaches storage devices and provides a common access mechanism to
|
|
storage controllers and attached devices.
|
|
The
|
|
.Nm
|
|
driver is
|
|
.Xr cam 4
|
|
aware and devices associated with
|
|
.Nm
|
|
can be seen using
|
|
.Xr camcontrol 8 .
|
|
The
|
|
.Xr mfi 4
|
|
driver does not understand the
|
|
.Xr cam 4
|
|
layer and it directly associates storage disks to the block layer.
|
|
.Pp
|
|
.Nm Thunderbolt Controller:
|
|
This is the 6Gb/s MegaRAID HBA card which has device id 0x005B.
|
|
.Pp
|
|
.Nm Invader Controller:
|
|
This is 12Gb/s MegaRAID HBA card which has device id 0x005D.
|
|
.Pp
|
|
.Nm Fury Controller:
|
|
This is the 12Gb/s MegaRAID HBA card which has device id 0x005F.
|
|
.Ed
|
|
.Sh AUTHORS
|
|
The
|
|
.Nm
|
|
driver and this manual page were written by
|
|
.An Kashyap Desai Aq Mt Kashyap.Desai@lsi.com .
|
|
.Sh TODO
|
|
The driver does not support big-endian architectures at this time.
|
|
.Pp
|
|
The driver does not support alias for device name (it is required when the user
|
|
switches between two drivers and does not want to edit
|
|
.Pa /etc/fstab
|
|
manually).
|
|
.Pp
|
|
The
|
|
.Nm
|
|
driver exposes devices as
|
|
.Pa /dev/da? ,
|
|
whereas
|
|
.Xr mfi 4
|
|
exposes devices as
|
|
.Pa /dev/mfid? .
|
|
.Pp
|
|
.Nm
|
|
does not support the Linux Emulator interface.
|
|
.Pp
|
|
.Nm
|
|
will not work with
|
|
.Xr mfiutil 8 .
|