439 lines
10 KiB
C
439 lines
10 KiB
C
/*
|
|
* Control LCD module hung off parallel port using the
|
|
* ppi 'geek port' interface.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#include <stdio.h>
|
|
#include <stdlib.h>
|
|
#include <string.h>
|
|
#include <ctype.h>
|
|
#include <fcntl.h>
|
|
#include <unistd.h>
|
|
#include <err.h>
|
|
#include <sysexits.h>
|
|
|
|
#include <dev/ppbus/ppbconf.h>
|
|
#include <dev/ppbus/ppi.h>
|
|
|
|
#define debug(lev, fmt, args...) if (debuglevel >= lev) fprintf(stderr, fmt "\n" , ## args);
|
|
|
|
static void usage(void);
|
|
static char *progname;
|
|
|
|
#define DEFAULT_DEVICE "/dev/ppi0"
|
|
|
|
/* Driver functions */
|
|
static void hd44780_prepare(char *devname, char *options);
|
|
static void hd44780_finish(void);
|
|
static void hd44780_command(int cmd);
|
|
static void hd44780_putc(int c);
|
|
|
|
/*
|
|
* Commands
|
|
* Note that unrecognised command escapes are passed through with
|
|
* the command value set to the ASCII value of the escaped character.
|
|
*/
|
|
#define CMD_RESET 0
|
|
#define CMD_BKSP 1
|
|
#define CMD_CLR 2
|
|
#define CMD_NL 3
|
|
#define CMD_CR 4
|
|
#define CMD_HOME 5
|
|
|
|
#define MAX_DRVOPT 10 /* maximum driver-specific options */
|
|
|
|
struct lcd_driver
|
|
{
|
|
char *l_code;
|
|
char *l_name;
|
|
char *l_options[MAX_DRVOPT];
|
|
void (* l_prepare)(char *name, char *options);
|
|
void (* l_finish)(void);
|
|
void (* l_command)(int cmd);
|
|
void (* l_putc)(int c);
|
|
};
|
|
|
|
static struct lcd_driver lcd_drivertab[] = {
|
|
{
|
|
"hd44780",
|
|
"Hitachi HD44780 and compatibles",
|
|
{
|
|
"Reset options:",
|
|
" 1 1-line display (default 2)",
|
|
" B Cursor blink enable",
|
|
" C Cursor enable",
|
|
" F Large font select",
|
|
NULL
|
|
},
|
|
hd44780_prepare,
|
|
hd44780_finish,
|
|
hd44780_command,
|
|
hd44780_putc
|
|
},
|
|
{
|
|
NULL,
|
|
NULL,
|
|
{
|
|
NULL
|
|
},
|
|
NULL,
|
|
NULL
|
|
}
|
|
};
|
|
|
|
static void do_char(struct lcd_driver *driver, char ch);
|
|
|
|
int debuglevel = 0;
|
|
int vflag = 0;
|
|
|
|
int
|
|
main(int argc, char *argv[])
|
|
{
|
|
extern char *optarg;
|
|
extern int optind;
|
|
struct lcd_driver *driver = &lcd_drivertab[0];
|
|
char *drivertype, *cp;
|
|
char *devname = DEFAULT_DEVICE;
|
|
char *drvopts = NULL;
|
|
int ch, i;
|
|
|
|
if ((progname = strrchr(argv[0], '/'))) {
|
|
progname++;
|
|
} else {
|
|
progname = argv[0];
|
|
}
|
|
|
|
drivertype = getenv("LCD_TYPE");
|
|
|
|
while ((ch = getopt(argc, argv, "Dd:f:o:v")) != -1) {
|
|
switch(ch) {
|
|
case 'D':
|
|
debuglevel++;
|
|
break;
|
|
case 'd':
|
|
drivertype = optarg;
|
|
break;
|
|
case 'f':
|
|
devname = optarg;
|
|
break;
|
|
case 'o':
|
|
drvopts = optarg;
|
|
break;
|
|
case 'v':
|
|
vflag = 1;
|
|
break;
|
|
default:
|
|
usage();
|
|
}
|
|
}
|
|
argc -= optind;
|
|
argv += optind;
|
|
|
|
/* If an LCD type was specified, look it up */
|
|
if (drivertype != NULL) {
|
|
driver = NULL;
|
|
for (i = 0; lcd_drivertab[i].l_code != NULL; i++) {
|
|
if (!strcmp(drivertype, lcd_drivertab[i].l_code)) {
|
|
driver = &lcd_drivertab[i];
|
|
break;
|
|
}
|
|
}
|
|
if (driver == NULL) {
|
|
warnx("LCD driver '%s' not known", drivertype);
|
|
usage();
|
|
}
|
|
}
|
|
debug(1, "Driver selected for %s", driver->l_name);
|
|
driver->l_prepare(devname, drvopts);
|
|
atexit(driver->l_finish);
|
|
|
|
if (argc > 0) {
|
|
debug(2, "reading input from %d argument%s", argc, (argc > 1) ? "s" : "");
|
|
for (i = 0; i < argc; i++)
|
|
for (cp = argv[i]; *cp; cp++)
|
|
do_char(driver, *cp);
|
|
} else {
|
|
debug(2, "reading input from stdin");
|
|
setvbuf(stdin, NULL, _IONBF, 0);
|
|
while ((ch = fgetc(stdin)) != EOF)
|
|
do_char(driver, (char)ch);
|
|
}
|
|
exit(EX_OK);
|
|
}
|
|
|
|
static void
|
|
usage(void)
|
|
{
|
|
int i, j;
|
|
|
|
fprintf(stderr, "usage: %s [-v] [-d drivername] [-f device] [-o options] [args...]\n", progname);
|
|
fprintf(stderr, " -D Increase debugging\n");
|
|
fprintf(stderr, " -f Specify device, default is '%s'\n", DEFAULT_DEVICE);
|
|
fprintf(stderr, " -d Specify driver, one of:\n");
|
|
for (i = 0; lcd_drivertab[i].l_code != NULL; i++) {
|
|
fprintf(stderr, " %-10s (%s)%s\n",
|
|
lcd_drivertab[i].l_code, lcd_drivertab[i].l_name, (i == 0) ? " *default*" : "");
|
|
if (lcd_drivertab[i].l_options[0] != NULL) {
|
|
|
|
for (j = 0; lcd_drivertab[i].l_options[j] != NULL; j++)
|
|
fprintf(stderr, " %s\n", lcd_drivertab[i].l_options[j]);
|
|
}
|
|
}
|
|
fprintf(stderr, " -o Specify driver option string\n");
|
|
fprintf(stderr, " args Message strings. Embedded escapes supported:\n");
|
|
fprintf(stderr, " \\b Backspace\n");
|
|
fprintf(stderr, " \\f Clear display, home cursor\n");
|
|
fprintf(stderr, " \\n Newline\n");
|
|
fprintf(stderr, " \\r Carriage return\n");
|
|
fprintf(stderr, " \\R Reset display\n");
|
|
fprintf(stderr, " \\v Home cursor\n");
|
|
fprintf(stderr, " \\\\ Literal \\\n");
|
|
fprintf(stderr, " If args not supplied, strings are read from standard input\n");
|
|
exit(EX_USAGE);
|
|
}
|
|
|
|
static void
|
|
do_char(struct lcd_driver *driver, char ch)
|
|
{
|
|
static int esc = 0;
|
|
|
|
if (esc) {
|
|
switch(ch) {
|
|
case 'b':
|
|
driver->l_command(CMD_BKSP);
|
|
break;
|
|
case 'f':
|
|
driver->l_command(CMD_CLR);
|
|
break;
|
|
case 'n':
|
|
driver->l_command(CMD_NL);
|
|
break;
|
|
case 'r':
|
|
driver->l_command(CMD_CR);
|
|
break;
|
|
case 'R':
|
|
driver->l_command(CMD_RESET);
|
|
break;
|
|
case 'v':
|
|
driver->l_command(CMD_HOME);
|
|
break;
|
|
case '\\':
|
|
driver->l_putc('\\');
|
|
break;
|
|
default:
|
|
driver->l_command(ch);
|
|
break;
|
|
}
|
|
esc = 0;
|
|
} else {
|
|
if (ch == '\\') {
|
|
esc = 1;
|
|
} else {
|
|
if (vflag || isprint(ch))
|
|
driver->l_putc(ch);
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/******************************************************************************
|
|
* Driver for the Hitachi HD44780. This is probably *the* most common driver
|
|
* to be found on one- and two-line alphanumeric LCDs.
|
|
*
|
|
* This driver assumes the following connections :
|
|
*
|
|
* Parallel Port LCD Module
|
|
* --------------------------------
|
|
* Strobe (1) Enable (6)
|
|
* Data (2-9) Data (7-14)
|
|
* Select In (17) RS (4)
|
|
* Auto Feed (14) R/W (5)
|
|
*
|
|
* In addition, power must be supplied to the module, normally with
|
|
* a circuit similar to this:
|
|
*
|
|
* VCC (+5V) O------o-------o--------O Module pin 2
|
|
* | | +
|
|
* / ---
|
|
* \ --- 1uF
|
|
* / | -
|
|
* \ <-----o--------O Module pin 3
|
|
* /
|
|
* \
|
|
* |
|
|
* GND O------o----------------O Module pin 1
|
|
*
|
|
* The ground line should also be connected to the parallel port, on
|
|
* one of the ground pins (eg. pin 25).
|
|
*
|
|
* Note that the pinning on some LCD modules has the odd and even pins
|
|
* arranged as though reversed; check carefully before conecting a module
|
|
* as it is possible to toast the HD44780 if the power is reversed.
|
|
*/
|
|
|
|
static int hd_fd;
|
|
static u_int8_t hd_cbits;
|
|
static int hd_lines = 2;
|
|
static int hd_blink = 0;
|
|
static int hd_cursor = 0;
|
|
static int hd_font = 0;
|
|
|
|
#define HD_COMMAND SELECTIN
|
|
#define HD_DATA 0
|
|
#define HD_READ 0
|
|
#define HD_WRITE AUTOFEED
|
|
|
|
#define HD_BF 0x80 /* internal busy flag */
|
|
#define HD_ADDRMASK 0x7f /* DDRAM address mask */
|
|
|
|
#define hd_sctrl(v) {u_int8_t _val; _val = hd_cbits | v; ioctl(hd_fd, PPISCTRL, &_val);}
|
|
#define hd_sdata(v) {u_int8_t _val; _val = v; ioctl(hd_fd, PPISDATA, &_val);}
|
|
#define hd_gdata(v) ioctl(hd_fd, PPIGDATA, &v)
|
|
|
|
static void
|
|
hd44780_output(int type, int data)
|
|
{
|
|
debug(3, "%s -> 0x%02x", (type == HD_COMMAND) ? "cmd " : "data", data);
|
|
hd_sctrl(type | HD_WRITE | STROBE); /* set direction, address */
|
|
hd_sctrl(type | HD_WRITE); /* raise E */
|
|
hd_sdata((u_int8_t) data); /* drive data */
|
|
hd_sctrl(type | HD_WRITE | STROBE); /* lower E */
|
|
}
|
|
|
|
static int
|
|
hd44780_input(int type)
|
|
{
|
|
u_int8_t val;
|
|
|
|
hd_sctrl(type | HD_READ | STROBE); /* set direction, address */
|
|
hd_sctrl(type | HD_READ); /* raise E */
|
|
hd_gdata(val); /* read data */
|
|
hd_sctrl(type | HD_READ | STROBE); /* lower E */
|
|
|
|
debug(3, "0x%02x -> %s", val, (type == HD_COMMAND) ? "cmd " : "data");
|
|
return(val);
|
|
}
|
|
|
|
static void
|
|
hd44780_prepare(char *devname, char *options)
|
|
{
|
|
char *cp = options;
|
|
|
|
if ((hd_fd = open(devname, O_RDWR, 0)) == -1)
|
|
err(EX_OSFILE, "can't open '%s'", devname);
|
|
|
|
/* parse options */
|
|
while (cp && *cp) {
|
|
switch (*cp++) {
|
|
case '1':
|
|
hd_lines = 1;
|
|
break;
|
|
case 'B':
|
|
hd_blink = 1;
|
|
break;
|
|
case 'C':
|
|
hd_cursor = 1;
|
|
break;
|
|
case 'F':
|
|
hd_font = 1;
|
|
break;
|
|
default:
|
|
errx(EX_USAGE, "hd44780: unknown option code '%c'", *(cp-1));
|
|
}
|
|
}
|
|
|
|
/* Put LCD in idle state */
|
|
if (ioctl(hd_fd, PPIGCTRL, &hd_cbits)) /* save other control bits */
|
|
err(EX_IOERR, "ioctl PPIGCTRL failed (not a ppi device?)");
|
|
hd_cbits &= ~(STROBE | SELECTIN | AUTOFEED); /* set strobe, RS, R/W low */
|
|
debug(2, "static control bits 0x%x", hd_cbits);
|
|
hd_sctrl(STROBE);
|
|
hd_sdata(0);
|
|
|
|
}
|
|
|
|
static void
|
|
hd44780_finish(void)
|
|
{
|
|
close(hd_fd);
|
|
}
|
|
|
|
static void
|
|
hd44780_command(int cmd)
|
|
{
|
|
u_int8_t val;
|
|
|
|
switch (cmd) {
|
|
case CMD_RESET: /* full manual reset and reconfigure as per datasheet */
|
|
debug(1, "hd44780: reset to %d lines, %s font,%s%s cursor",
|
|
hd_lines, hd_font ? "5x10" : "5x7", hd_cursor ? "" : " no", hd_blink ? " blinking" : "");
|
|
val = 0x30;
|
|
if (hd_lines == 2)
|
|
val |= 0x08;
|
|
if (hd_font)
|
|
val |= 0x04;
|
|
hd44780_output(HD_COMMAND, val);
|
|
usleep(10000);
|
|
hd44780_output(HD_COMMAND, val);
|
|
usleep(1000);
|
|
hd44780_output(HD_COMMAND, val);
|
|
usleep(1000);
|
|
val = 0x08; /* display off */
|
|
hd44780_output(HD_COMMAND, val);
|
|
usleep(1000);
|
|
val |= 0x04; /* display on */
|
|
if (hd_cursor)
|
|
val |= 0x02;
|
|
if (hd_blink)
|
|
val |= 0x01;
|
|
hd44780_output(HD_COMMAND, val);
|
|
usleep(1000);
|
|
hd44780_output(HD_COMMAND, 0x06); /* shift cursor by increment */
|
|
usleep(1000);
|
|
/* FALLTHROUGH */
|
|
|
|
case CMD_CLR:
|
|
hd44780_output(HD_COMMAND, 0x01);
|
|
usleep(2000);
|
|
break;
|
|
|
|
case CMD_BKSP:
|
|
hd44780_output(HD_DATA, 0x10); /* shift cursor left one */
|
|
break;
|
|
|
|
case CMD_NL:
|
|
if (hd_lines == 2)
|
|
hd44780_output(HD_COMMAND, 0xc0); /* beginning of second line */
|
|
break;
|
|
|
|
case CMD_CR:
|
|
/* XXX will not work in 4-line mode, or where readback fails */
|
|
val = hd44780_input(HD_COMMAND) & 0x3f; /* mask character position, save line pos */
|
|
hd44780_output(HD_COMMAND, 0x80 | val);
|
|
break;
|
|
|
|
case CMD_HOME:
|
|
hd44780_output(HD_COMMAND, 0x02);
|
|
usleep(2000);
|
|
break;
|
|
|
|
default:
|
|
if (isprint(cmd)) {
|
|
warnx("unknown command %c", cmd);
|
|
} else {
|
|
warnx("unknown command 0x%x", cmd);
|
|
}
|
|
}
|
|
usleep(40);
|
|
}
|
|
|
|
static void
|
|
hd44780_putc(int c)
|
|
{
|
|
hd44780_output(HD_DATA, c);
|
|
usleep(40);
|
|
}
|
|
|