freebsd-skq/sys/netinet/in_pcb.h
Andrew Gallatin a034518ac8 Filter TCP connections to SO_REUSEPORT_LB listen sockets by NUMA domain
In order to efficiently serve web traffic on a NUMA
machine, one must avoid as many NUMA domain crossings as
possible. With SO_REUSEPORT_LB, a number of workers can share a
listen socket. However, even if a worker sets affinity to a core
or set of cores on a NUMA domain, it will receive connections
associated with all NUMA domains in the system. This will lead to
cross-domain traffic when the server writes to the socket or
calls sendfile(), and memory is allocated on the server's local
NUMA node, but transmitted on the NUMA node associated with the
TCP connection. Similarly, when the server reads from the socket,
he will likely be reading memory allocated on the NUMA domain
associated with the TCP connection.

This change provides a new socket ioctl, TCP_REUSPORT_LB_NUMA. A
server can now tell the kernel to filter traffic so that only
incoming connections associated with the desired NUMA domain are
given to the server. (Of course, in the case where there are no
servers sharing the listen socket on some domain, then as a
fallback, traffic will be hashed as normal to all servers sharing
the listen socket regardless of domain). This allows a server to
deal only with traffic that is local to its NUMA domain, and
avoids cross-domain traffic in most cases.

This patch, and a corresponding small patch to nginx to use
TCP_REUSPORT_LB_NUMA allows us to serve 190Gb/s of kTLS encrypted
https media content from dual-socket Xeons with only 13% (as
measured by pcm.x) cross domain traffic on the memory controller.

Reviewed by:	jhb, bz (earlier version), bcr (man page)
Tested by: gonzo
Sponsored by:	Netfix
Differential Revision:	https://reviews.freebsd.org/D21636
2020-12-19 22:04:46 +00:00

898 lines
34 KiB
C

/*-
* SPDX-License-Identifier: BSD-3-Clause
*
* Copyright (c) 1982, 1986, 1990, 1993
* The Regents of the University of California.
* Copyright (c) 2010-2011 Juniper Networks, Inc.
* All rights reserved.
*
* Portions of this software were developed by Robert N. M. Watson under
* contract to Juniper Networks, Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)in_pcb.h 8.1 (Berkeley) 6/10/93
* $FreeBSD$
*/
#ifndef _NETINET_IN_PCB_H_
#define _NETINET_IN_PCB_H_
#include <sys/queue.h>
#include <sys/epoch.h>
#include <sys/_lock.h>
#include <sys/_mutex.h>
#include <sys/_rwlock.h>
#include <net/route.h>
#ifdef _KERNEL
#include <sys/lock.h>
#include <sys/rwlock.h>
#include <net/vnet.h>
#include <vm/uma.h>
#endif
#include <sys/ck.h>
/*
* struct inpcb is the common protocol control block structure used in most
* IP transport protocols.
*
* Pointers to local and foreign host table entries, local and foreign socket
* numbers, and pointers up (to a socket structure) and down (to a
* protocol-specific control block) are stored here.
*/
CK_LIST_HEAD(inpcbhead, inpcb);
CK_LIST_HEAD(inpcbporthead, inpcbport);
CK_LIST_HEAD(inpcblbgrouphead, inpcblbgroup);
typedef uint64_t inp_gen_t;
/*
* PCB with AF_INET6 null bind'ed laddr can receive AF_INET input packet.
* So, AF_INET6 null laddr is also used as AF_INET null laddr, by utilizing
* the following structure.
*/
struct in_addr_4in6 {
u_int32_t ia46_pad32[3];
struct in_addr ia46_addr4;
};
union in_dependaddr {
struct in_addr_4in6 id46_addr;
struct in6_addr id6_addr;
};
/*
* NOTE: ipv6 addrs should be 64-bit aligned, per RFC 2553. in_conninfo has
* some extra padding to accomplish this.
* NOTE 2: tcp_syncache.c uses first 5 32-bit words, which identify fport,
* lport, faddr to generate hash, so these fields shouldn't be moved.
*/
struct in_endpoints {
u_int16_t ie_fport; /* foreign port */
u_int16_t ie_lport; /* local port */
/* protocol dependent part, local and foreign addr */
union in_dependaddr ie_dependfaddr; /* foreign host table entry */
union in_dependaddr ie_dependladdr; /* local host table entry */
#define ie_faddr ie_dependfaddr.id46_addr.ia46_addr4
#define ie_laddr ie_dependladdr.id46_addr.ia46_addr4
#define ie6_faddr ie_dependfaddr.id6_addr
#define ie6_laddr ie_dependladdr.id6_addr
u_int32_t ie6_zoneid; /* scope zone id */
};
/*
* XXX The defines for inc_* are hacks and should be changed to direct
* references.
*/
struct in_conninfo {
u_int8_t inc_flags;
u_int8_t inc_len;
u_int16_t inc_fibnum; /* XXX was pad, 16 bits is plenty */
/* protocol dependent part */
struct in_endpoints inc_ie;
};
/*
* Flags for inc_flags.
*/
#define INC_ISIPV6 0x01
#define INC_IPV6MINMTU 0x02
#define inc_fport inc_ie.ie_fport
#define inc_lport inc_ie.ie_lport
#define inc_faddr inc_ie.ie_faddr
#define inc_laddr inc_ie.ie_laddr
#define inc6_faddr inc_ie.ie6_faddr
#define inc6_laddr inc_ie.ie6_laddr
#define inc6_zoneid inc_ie.ie6_zoneid
#if defined(_KERNEL) || defined(_WANT_INPCB)
/*
* struct inpcb captures the network layer state for TCP, UDP, and raw IPv4 and
* IPv6 sockets. In the case of TCP and UDP, further per-connection state is
* hung off of inp_ppcb most of the time. Almost all fields of struct inpcb
* are static after creation or protected by a per-inpcb rwlock, inp_lock. A
* few fields are protected by multiple locks as indicated in the locking notes
* below. For these fields, all of the listed locks must be write-locked for
* any modifications. However, these fields can be safely read while any one of
* the listed locks are read-locked. This model can permit greater concurrency
* for read operations. For example, connections can be looked up while only
* holding a read lock on the global pcblist lock. This is important for
* performance when attempting to find the connection for a packet given its IP
* and port tuple.
*
* One noteworthy exception is that the global pcbinfo lock follows a different
* set of rules in relation to the inp_list field. Rather than being
* write-locked for modifications and read-locked for list iterations, it must
* be read-locked during modifications and write-locked during list iterations.
* This ensures that the relatively rare global list iterations safely walk a
* stable snapshot of connections while allowing more common list modifications
* to safely grab the pcblist lock just while adding or removing a connection
* from the global list.
*
* Key:
* (b) - Protected by the hpts lock.
* (c) - Constant after initialization
* (e) - Protected by the net_epoch_prempt epoch
* (g) - Protected by the pcbgroup lock
* (i) - Protected by the inpcb lock
* (p) - Protected by the pcbinfo lock for the inpcb
* (l) - Protected by the pcblist lock for the inpcb
* (h) - Protected by the pcbhash lock for the inpcb
* (s) - Protected by another subsystem's locks
* (x) - Undefined locking
*
* Notes on the tcp_hpts:
*
* First Hpts lock order is
* 1) INP_WLOCK()
* 2) HPTS_LOCK() i.e. hpts->pmtx
*
* To insert a TCB on the hpts you *must* be holding the INP_WLOCK().
* You may check the inp->inp_in_hpts flag without the hpts lock.
* The hpts is the only one that will clear this flag holding
* only the hpts lock. This means that in your tcp_output()
* routine when you test for the inp_in_hpts flag to be 1
* it may be transitioning to 0 (by the hpts).
* That's ok since that will just mean an extra call to tcp_output
* that most likely will find the call you executed
* (when the mis-match occured) will have put the TCB back
* on the hpts and it will return. If your
* call did not add the inp back to the hpts then you will either
* over-send or the cwnd will block you from sending more.
*
* Note you should also be holding the INP_WLOCK() when you
* call the remove from the hpts as well. Though usually
* you are either doing this from a timer, where you need and have
* the INP_WLOCK() or from destroying your TCB where again
* you should already have the INP_WLOCK().
*
* The inp_hpts_cpu, inp_hpts_cpu_set, inp_input_cpu and
* inp_input_cpu_set fields are controlled completely by
* the hpts. Do not ever set these. The inp_hpts_cpu_set
* and inp_input_cpu_set fields indicate if the hpts has
* setup the respective cpu field. It is advised if this
* field is 0, to enqueue the packet with the appropriate
* hpts_immediate() call. If the _set field is 1, then
* you may compare the inp_*_cpu field to the curcpu and
* may want to again insert onto the hpts if these fields
* are not equal (i.e. you are not on the expected CPU).
*
* A note on inp_hpts_calls and inp_input_calls, these
* flags are set when the hpts calls either the output
* or do_segment routines respectively. If the routine
* being called wants to use this, then it needs to
* clear the flag before returning. The hpts will not
* clear the flag. The flags can be used to tell if
* the hpts is the function calling the respective
* routine.
*
* A few other notes:
*
* When a read lock is held, stability of the field is guaranteed; to write
* to a field, a write lock must generally be held.
*
* netinet/netinet6-layer code should not assume that the inp_socket pointer
* is safe to dereference without inp_lock being held, even for protocols
* other than TCP (where the inpcb persists during TIMEWAIT even after the
* socket has been freed), or there may be close(2)-related races.
*
* The inp_vflag field is overloaded, and would otherwise ideally be (c).
*
* TODO: Currently only the TCP stack is leveraging the global pcbinfo lock
* read-lock usage during modification, this model can be applied to other
* protocols (especially SCTP).
*/
struct icmp6_filter;
struct inpcbpolicy;
struct m_snd_tag;
struct inpcb {
/* Cache line #1 (amd64) */
CK_LIST_ENTRY(inpcb) inp_hash; /* [w](h/i) [r](e/i) hash list */
CK_LIST_ENTRY(inpcb) inp_pcbgrouphash; /* (g/i) hash list */
struct rwlock inp_lock;
/* Cache line #2 (amd64) */
#define inp_start_zero inp_hpts
#define inp_zero_size (sizeof(struct inpcb) - \
offsetof(struct inpcb, inp_start_zero))
TAILQ_ENTRY(inpcb) inp_hpts; /* pacing out queue next lock(b) */
uint32_t inp_hpts_request; /* Current hpts request, zero if
* fits in the pacing window (i&b). */
/*
* Note the next fields are protected by a
* different lock (hpts-lock). This means that
* they must correspond in size to the smallest
* protectable bit field (uint8_t on x86, and
* other platfomrs potentially uint32_t?). Also
* since CPU switches can occur at different times the two
* fields can *not* be collapsed into a signal bit field.
*/
#if defined(__amd64__) || defined(__i386__)
volatile uint8_t inp_in_hpts; /* on output hpts (lock b) */
volatile uint8_t inp_in_input; /* on input hpts (lock b) */
#else
volatile uint32_t inp_in_hpts; /* on output hpts (lock b) */
volatile uint32_t inp_in_input; /* on input hpts (lock b) */
#endif
volatile uint16_t inp_hpts_cpu; /* Lock (i) */
u_int inp_refcount; /* (i) refcount */
int inp_flags; /* (i) generic IP/datagram flags */
int inp_flags2; /* (i) generic IP/datagram flags #2*/
volatile uint16_t inp_input_cpu; /* Lock (i) */
volatile uint8_t inp_hpts_cpu_set :1, /* on output hpts (i) */
inp_input_cpu_set : 1, /* on input hpts (i) */
inp_hpts_calls :1, /* (i) from output hpts */
inp_input_calls :1, /* (i) from input hpts */
inp_spare_bits2 : 4;
uint8_t inp_numa_domain; /* numa domain */
void *inp_ppcb; /* (i) pointer to per-protocol pcb */
struct socket *inp_socket; /* (i) back pointer to socket */
uint32_t inp_hptsslot; /* Hpts wheel slot this tcb is Lock(i&b) */
uint32_t inp_hpts_drop_reas; /* reason we are dropping the PCB (lock i&b) */
TAILQ_ENTRY(inpcb) inp_input; /* pacing in queue next lock(b) */
struct inpcbinfo *inp_pcbinfo; /* (c) PCB list info */
struct inpcbgroup *inp_pcbgroup; /* (g/i) PCB group list */
CK_LIST_ENTRY(inpcb) inp_pcbgroup_wild; /* (g/i/h) group wildcard entry */
struct ucred *inp_cred; /* (c) cache of socket cred */
u_int32_t inp_flow; /* (i) IPv6 flow information */
u_char inp_vflag; /* (i) IP version flag (v4/v6) */
u_char inp_ip_ttl; /* (i) time to live proto */
u_char inp_ip_p; /* (c) protocol proto */
u_char inp_ip_minttl; /* (i) minimum TTL or drop */
uint32_t inp_flowid; /* (x) flow id / queue id */
struct m_snd_tag *inp_snd_tag; /* (i) send tag for outgoing mbufs */
uint32_t inp_flowtype; /* (x) M_HASHTYPE value */
uint32_t inp_rss_listen_bucket; /* (x) overridden RSS listen bucket */
/* Local and foreign ports, local and foreign addr. */
struct in_conninfo inp_inc; /* (i) list for PCB's local port */
/* MAC and IPSEC policy information. */
struct label *inp_label; /* (i) MAC label */
struct inpcbpolicy *inp_sp; /* (s) for IPSEC */
/* Protocol-dependent part; options. */
struct {
u_char inp_ip_tos; /* (i) type of service proto */
struct mbuf *inp_options; /* (i) IP options */
struct ip_moptions *inp_moptions; /* (i) mcast options */
};
struct {
/* (i) IP options */
struct mbuf *in6p_options;
/* (i) IP6 options for outgoing packets */
struct ip6_pktopts *in6p_outputopts;
/* (i) IP multicast options */
struct ip6_moptions *in6p_moptions;
/* (i) ICMPv6 code type filter */
struct icmp6_filter *in6p_icmp6filt;
/* (i) IPV6_CHECKSUM setsockopt */
int in6p_cksum;
short in6p_hops;
};
CK_LIST_ENTRY(inpcb) inp_portlist; /* (i/h) */
struct inpcbport *inp_phd; /* (i/h) head of this list */
inp_gen_t inp_gencnt; /* (c) generation count */
void *spare_ptr; /* Spare pointer. */
rt_gen_t inp_rt_cookie; /* generation for route entry */
union { /* cached L3 information */
struct route inp_route;
struct route_in6 inp_route6;
};
CK_LIST_ENTRY(inpcb) inp_list; /* (p/l) list for all PCBs for proto */
/* (e[r]) for list iteration */
/* (p[w]/l) for addition/removal */
struct epoch_context inp_epoch_ctx;
};
#endif /* _KERNEL */
#define inp_fport inp_inc.inc_fport
#define inp_lport inp_inc.inc_lport
#define inp_faddr inp_inc.inc_faddr
#define inp_laddr inp_inc.inc_laddr
#define in6p_faddr inp_inc.inc6_faddr
#define in6p_laddr inp_inc.inc6_laddr
#define in6p_zoneid inp_inc.inc6_zoneid
#define inp_vnet inp_pcbinfo->ipi_vnet
/*
* The range of the generation count, as used in this implementation, is 9e19.
* We would have to create 300 billion connections per second for this number
* to roll over in a year. This seems sufficiently unlikely that we simply
* don't concern ourselves with that possibility.
*/
/*
* Interface exported to userland by various protocols which use inpcbs. Hack
* alert -- only define if struct xsocket is in scope.
* Fields prefixed with "xi_" are unique to this structure, and the rest
* match fields in the struct inpcb, to ease coding and porting.
*
* Legend:
* (s) - used by userland utilities in src
* (p) - used by utilities in ports
* (3) - is known to be used by third party software not in ports
* (n) - no known usage
*/
#ifdef _SYS_SOCKETVAR_H_
struct xinpcb {
ksize_t xi_len; /* length of this structure */
struct xsocket xi_socket; /* (s,p) */
struct in_conninfo inp_inc; /* (s,p) */
uint64_t inp_gencnt; /* (s,p) */
kvaddr_t inp_ppcb; /* (s) netstat(1) */
int64_t inp_spare64[4];
uint32_t inp_flow; /* (s) */
uint32_t inp_flowid; /* (s) */
uint32_t inp_flowtype; /* (s) */
int32_t inp_flags; /* (s,p) */
int32_t inp_flags2; /* (s) */
int32_t inp_rss_listen_bucket; /* (n) */
int32_t in6p_cksum; /* (n) */
int32_t inp_spare32[4];
uint16_t in6p_hops; /* (n) */
uint8_t inp_ip_tos; /* (n) */
int8_t pad8;
uint8_t inp_vflag; /* (s,p) */
uint8_t inp_ip_ttl; /* (n) */
uint8_t inp_ip_p; /* (n) */
uint8_t inp_ip_minttl; /* (n) */
int8_t inp_spare8[4];
} __aligned(8);
struct xinpgen {
ksize_t xig_len; /* length of this structure */
u_int xig_count; /* number of PCBs at this time */
uint32_t _xig_spare32;
inp_gen_t xig_gen; /* generation count at this time */
so_gen_t xig_sogen; /* socket generation count this time */
uint64_t _xig_spare64[4];
} __aligned(8);
#ifdef _KERNEL
void in_pcbtoxinpcb(const struct inpcb *, struct xinpcb *);
#endif
#endif /* _SYS_SOCKETVAR_H_ */
struct inpcbport {
struct epoch_context phd_epoch_ctx;
CK_LIST_ENTRY(inpcbport) phd_hash;
struct inpcbhead phd_pcblist;
u_short phd_port;
};
struct in_pcblist {
int il_count;
struct epoch_context il_epoch_ctx;
struct inpcbinfo *il_pcbinfo;
struct inpcb *il_inp_list[0];
};
/*-
* Global data structure for each high-level protocol (UDP, TCP, ...) in both
* IPv4 and IPv6. Holds inpcb lists and information for managing them.
*
* Each pcbinfo is protected by three locks: ipi_lock, ipi_hash_lock and
* ipi_list_lock:
* - ipi_lock covering the global pcb list stability during loop iteration,
* - ipi_hash_lock covering the hashed lookup tables,
* - ipi_list_lock covering mutable global fields (such as the global
* pcb list)
*
* The lock order is:
*
* ipi_lock (before)
* inpcb locks (before)
* ipi_list locks (before)
* {ipi_hash_lock, pcbgroup locks}
*
* Locking key:
*
* (c) Constant or nearly constant after initialisation
* (e) - Protected by the net_epoch_prempt epoch
* (g) Locked by ipi_lock
* (l) Locked by ipi_list_lock
* (h) Read using either net_epoch_preempt or inpcb lock; write requires both ipi_hash_lock and inpcb lock
* (p) Protected by one or more pcbgroup locks
* (x) Synchronisation properties poorly defined
*/
struct inpcbinfo {
/*
* Global lock protecting inpcb list modification
*/
struct mtx ipi_lock;
/*
* Global list of inpcbs on the protocol.
*/
struct inpcbhead *ipi_listhead; /* [r](e) [w](g/l) */
u_int ipi_count; /* (l) */
/*
* Generation count -- incremented each time a connection is allocated
* or freed.
*/
u_quad_t ipi_gencnt; /* (l) */
/*
* Fields associated with port lookup and allocation.
*/
u_short ipi_lastport; /* (x) */
u_short ipi_lastlow; /* (x) */
u_short ipi_lasthi; /* (x) */
/*
* UMA zone from which inpcbs are allocated for this protocol.
*/
struct uma_zone *ipi_zone; /* (c) */
/*
* Connection groups associated with this protocol. These fields are
* constant, but pcbgroup structures themselves are protected by
* per-pcbgroup locks.
*/
struct inpcbgroup *ipi_pcbgroups; /* (c) */
u_int ipi_npcbgroups; /* (c) */
u_int ipi_hashfields; /* (c) */
/*
* Global lock protecting modification non-pcbgroup hash lookup tables.
*/
struct mtx ipi_hash_lock;
/*
* Global hash of inpcbs, hashed by local and foreign addresses and
* port numbers.
*/
struct inpcbhead *ipi_hashbase; /* (h) */
u_long ipi_hashmask; /* (h) */
/*
* Global hash of inpcbs, hashed by only local port number.
*/
struct inpcbporthead *ipi_porthashbase; /* (h) */
u_long ipi_porthashmask; /* (h) */
/*
* List of wildcard inpcbs for use with pcbgroups. In the past, was
* per-pcbgroup but is now global. All pcbgroup locks must be held
* to modify the list, so any is sufficient to read it.
*/
struct inpcbhead *ipi_wildbase; /* (p) */
u_long ipi_wildmask; /* (p) */
/*
* Load balance groups used for the SO_REUSEPORT_LB option,
* hashed by local port.
*/
struct inpcblbgrouphead *ipi_lbgrouphashbase; /* (h) */
u_long ipi_lbgrouphashmask; /* (h) */
/*
* Pointer to network stack instance
*/
struct vnet *ipi_vnet; /* (c) */
/*
* general use 2
*/
void *ipi_pspare[2];
/*
* Global lock protecting global inpcb list, inpcb count, etc.
*/
struct rwlock ipi_list_lock;
};
#ifdef _KERNEL
/*
* Connection groups hold sets of connections that have similar CPU/thread
* affinity. Each connection belongs to exactly one connection group.
*/
struct inpcbgroup {
/*
* Per-connection group hash of inpcbs, hashed by local and foreign
* addresses and port numbers.
*/
struct inpcbhead *ipg_hashbase; /* (c) */
u_long ipg_hashmask; /* (c) */
/*
* Notional affinity of this pcbgroup.
*/
u_int ipg_cpu; /* (p) */
/*
* Per-connection group lock, not to be confused with ipi_lock.
* Protects the hash table hung off the group, but also the global
* wildcard list in inpcbinfo.
*/
struct mtx ipg_lock;
} __aligned(CACHE_LINE_SIZE);
/*
* Load balance groups used for the SO_REUSEPORT_LB socket option. Each group
* (or unique address:port combination) can be re-used at most
* INPCBLBGROUP_SIZMAX (256) times. The inpcbs are stored in il_inp which
* is dynamically resized as processes bind/unbind to that specific group.
*/
struct inpcblbgroup {
CK_LIST_ENTRY(inpcblbgroup) il_list;
struct epoch_context il_epoch_ctx;
uint16_t il_lport; /* (c) */
u_char il_vflag; /* (c) */
u_int8_t il_numa_domain;
uint32_t il_pad2;
union in_dependaddr il_dependladdr; /* (c) */
#define il_laddr il_dependladdr.id46_addr.ia46_addr4
#define il6_laddr il_dependladdr.id6_addr
uint32_t il_inpsiz; /* max count in il_inp[] (h) */
uint32_t il_inpcnt; /* cur count in il_inp[] (h) */
struct inpcb *il_inp[]; /* (h) */
};
#define INP_LOCK_INIT(inp, d, t) \
rw_init_flags(&(inp)->inp_lock, (t), RW_RECURSE | RW_DUPOK)
#define INP_LOCK_DESTROY(inp) rw_destroy(&(inp)->inp_lock)
#define INP_RLOCK(inp) rw_rlock(&(inp)->inp_lock)
#define INP_WLOCK(inp) rw_wlock(&(inp)->inp_lock)
#define INP_TRY_RLOCK(inp) rw_try_rlock(&(inp)->inp_lock)
#define INP_TRY_WLOCK(inp) rw_try_wlock(&(inp)->inp_lock)
#define INP_RUNLOCK(inp) rw_runlock(&(inp)->inp_lock)
#define INP_WUNLOCK(inp) rw_wunlock(&(inp)->inp_lock)
#define INP_UNLOCK(inp) rw_unlock(&(inp)->inp_lock)
#define INP_TRY_UPGRADE(inp) rw_try_upgrade(&(inp)->inp_lock)
#define INP_DOWNGRADE(inp) rw_downgrade(&(inp)->inp_lock)
#define INP_WLOCKED(inp) rw_wowned(&(inp)->inp_lock)
#define INP_LOCK_ASSERT(inp) rw_assert(&(inp)->inp_lock, RA_LOCKED)
#define INP_RLOCK_ASSERT(inp) rw_assert(&(inp)->inp_lock, RA_RLOCKED)
#define INP_WLOCK_ASSERT(inp) rw_assert(&(inp)->inp_lock, RA_WLOCKED)
#define INP_UNLOCK_ASSERT(inp) rw_assert(&(inp)->inp_lock, RA_UNLOCKED)
/*
* These locking functions are for inpcb consumers outside of sys/netinet,
* more specifically, they were added for the benefit of TOE drivers. The
* macros are reserved for use by the stack.
*/
void inp_wlock(struct inpcb *);
void inp_wunlock(struct inpcb *);
void inp_rlock(struct inpcb *);
void inp_runlock(struct inpcb *);
#ifdef INVARIANT_SUPPORT
void inp_lock_assert(struct inpcb *);
void inp_unlock_assert(struct inpcb *);
#else
#define inp_lock_assert(inp) do {} while (0)
#define inp_unlock_assert(inp) do {} while (0)
#endif
void inp_apply_all(void (*func)(struct inpcb *, void *), void *arg);
int inp_ip_tos_get(const struct inpcb *inp);
void inp_ip_tos_set(struct inpcb *inp, int val);
struct socket *
inp_inpcbtosocket(struct inpcb *inp);
struct tcpcb *
inp_inpcbtotcpcb(struct inpcb *inp);
void inp_4tuple_get(struct inpcb *inp, uint32_t *laddr, uint16_t *lp,
uint32_t *faddr, uint16_t *fp);
int inp_so_options(const struct inpcb *inp);
#endif /* _KERNEL */
#define INP_INFO_LOCK_INIT(ipi, d) \
mtx_init(&(ipi)->ipi_lock, (d), NULL, MTX_DEF| MTX_RECURSE)
#define INP_INFO_LOCK_DESTROY(ipi) mtx_destroy(&(ipi)->ipi_lock)
#define INP_INFO_WLOCK(ipi) mtx_lock(&(ipi)->ipi_lock)
#define INP_INFO_TRY_WLOCK(ipi) mtx_trylock(&(ipi)->ipi_lock)
#define INP_INFO_WLOCKED(ipi) mtx_owned(&(ipi)->ipi_lock)
#define INP_INFO_WUNLOCK(ipi) mtx_unlock(&(ipi)->ipi_lock)
#define INP_INFO_LOCK_ASSERT(ipi) MPASS(in_epoch(net_epoch_preempt) || mtx_owned(&(ipi)->ipi_lock))
#define INP_INFO_WLOCK_ASSERT(ipi) mtx_assert(&(ipi)->ipi_lock, MA_OWNED)
#define INP_INFO_WUNLOCK_ASSERT(ipi) \
mtx_assert(&(ipi)->ipi_lock, MA_NOTOWNED)
#define INP_LIST_LOCK_INIT(ipi, d) \
rw_init_flags(&(ipi)->ipi_list_lock, (d), 0)
#define INP_LIST_LOCK_DESTROY(ipi) rw_destroy(&(ipi)->ipi_list_lock)
#define INP_LIST_RLOCK(ipi) rw_rlock(&(ipi)->ipi_list_lock)
#define INP_LIST_WLOCK(ipi) rw_wlock(&(ipi)->ipi_list_lock)
#define INP_LIST_TRY_RLOCK(ipi) rw_try_rlock(&(ipi)->ipi_list_lock)
#define INP_LIST_TRY_WLOCK(ipi) rw_try_wlock(&(ipi)->ipi_list_lock)
#define INP_LIST_TRY_UPGRADE(ipi) rw_try_upgrade(&(ipi)->ipi_list_lock)
#define INP_LIST_RUNLOCK(ipi) rw_runlock(&(ipi)->ipi_list_lock)
#define INP_LIST_WUNLOCK(ipi) rw_wunlock(&(ipi)->ipi_list_lock)
#define INP_LIST_LOCK_ASSERT(ipi) \
rw_assert(&(ipi)->ipi_list_lock, RA_LOCKED)
#define INP_LIST_RLOCK_ASSERT(ipi) \
rw_assert(&(ipi)->ipi_list_lock, RA_RLOCKED)
#define INP_LIST_WLOCK_ASSERT(ipi) \
rw_assert(&(ipi)->ipi_list_lock, RA_WLOCKED)
#define INP_LIST_UNLOCK_ASSERT(ipi) \
rw_assert(&(ipi)->ipi_list_lock, RA_UNLOCKED)
#define INP_HASH_LOCK_INIT(ipi, d) mtx_init(&(ipi)->ipi_hash_lock, (d), NULL, MTX_DEF)
#define INP_HASH_LOCK_DESTROY(ipi) mtx_destroy(&(ipi)->ipi_hash_lock)
#define INP_HASH_WLOCK(ipi) mtx_lock(&(ipi)->ipi_hash_lock)
#define INP_HASH_WUNLOCK(ipi) mtx_unlock(&(ipi)->ipi_hash_lock)
#define INP_HASH_LOCK_ASSERT(ipi) MPASS(in_epoch(net_epoch_preempt) || mtx_owned(&(ipi)->ipi_hash_lock))
#define INP_HASH_WLOCK_ASSERT(ipi) mtx_assert(&(ipi)->ipi_hash_lock, MA_OWNED);
#define INP_GROUP_LOCK_INIT(ipg, d) mtx_init(&(ipg)->ipg_lock, (d), NULL, \
MTX_DEF | MTX_DUPOK)
#define INP_GROUP_LOCK_DESTROY(ipg) mtx_destroy(&(ipg)->ipg_lock)
#define INP_GROUP_LOCK(ipg) mtx_lock(&(ipg)->ipg_lock)
#define INP_GROUP_LOCK_ASSERT(ipg) mtx_assert(&(ipg)->ipg_lock, MA_OWNED)
#define INP_GROUP_UNLOCK(ipg) mtx_unlock(&(ipg)->ipg_lock)
#define INP_PCBHASH(faddr, lport, fport, mask) \
(((faddr) ^ ((faddr) >> 16) ^ ntohs((lport) ^ (fport))) & (mask))
#define INP_PCBPORTHASH(lport, mask) \
(ntohs((lport)) & (mask))
#define INP_PCBLBGROUP_PKTHASH(faddr, lport, fport) \
((faddr) ^ ((faddr) >> 16) ^ ntohs((lport) ^ (fport)))
#define INP6_PCBHASHKEY(faddr) ((faddr)->s6_addr32[3])
/*
* Flags for inp_vflags -- historically version flags only
*/
#define INP_IPV4 0x1
#define INP_IPV6 0x2
#define INP_IPV6PROTO 0x4 /* opened under IPv6 protocol */
/*
* Flags for inp_flags.
*/
#define INP_RECVOPTS 0x00000001 /* receive incoming IP options */
#define INP_RECVRETOPTS 0x00000002 /* receive IP options for reply */
#define INP_RECVDSTADDR 0x00000004 /* receive IP dst address */
#define INP_HDRINCL 0x00000008 /* user supplies entire IP header */
#define INP_HIGHPORT 0x00000010 /* user wants "high" port binding */
#define INP_LOWPORT 0x00000020 /* user wants "low" port binding */
#define INP_ANONPORT 0x00000040 /* port chosen for user */
#define INP_RECVIF 0x00000080 /* receive incoming interface */
#define INP_MTUDISC 0x00000100 /* user can do MTU discovery */
/* 0x000200 unused: was INP_FAITH */
#define INP_RECVTTL 0x00000400 /* receive incoming IP TTL */
#define INP_DONTFRAG 0x00000800 /* don't fragment packet */
#define INP_BINDANY 0x00001000 /* allow bind to any address */
#define INP_INHASHLIST 0x00002000 /* in_pcbinshash() has been called */
#define INP_RECVTOS 0x00004000 /* receive incoming IP TOS */
#define IN6P_IPV6_V6ONLY 0x00008000 /* restrict AF_INET6 socket for v6 */
#define IN6P_PKTINFO 0x00010000 /* receive IP6 dst and I/F */
#define IN6P_HOPLIMIT 0x00020000 /* receive hoplimit */
#define IN6P_HOPOPTS 0x00040000 /* receive hop-by-hop options */
#define IN6P_DSTOPTS 0x00080000 /* receive dst options after rthdr */
#define IN6P_RTHDR 0x00100000 /* receive routing header */
#define IN6P_RTHDRDSTOPTS 0x00200000 /* receive dstoptions before rthdr */
#define IN6P_TCLASS 0x00400000 /* receive traffic class value */
#define IN6P_AUTOFLOWLABEL 0x00800000 /* attach flowlabel automatically */
#define INP_TIMEWAIT 0x01000000 /* in TIMEWAIT, ppcb is tcptw */
#define INP_ONESBCAST 0x02000000 /* send all-ones broadcast */
#define INP_DROPPED 0x04000000 /* protocol drop flag */
#define INP_SOCKREF 0x08000000 /* strong socket reference */
#define INP_RESERVED_0 0x10000000 /* reserved field */
#define INP_RESERVED_1 0x20000000 /* reserved field */
#define IN6P_RFC2292 0x40000000 /* used RFC2292 API on the socket */
#define IN6P_MTU 0x80000000 /* receive path MTU */
#define INP_CONTROLOPTS (INP_RECVOPTS|INP_RECVRETOPTS|INP_RECVDSTADDR|\
INP_RECVIF|INP_RECVTTL|INP_RECVTOS|\
IN6P_PKTINFO|IN6P_HOPLIMIT|IN6P_HOPOPTS|\
IN6P_DSTOPTS|IN6P_RTHDR|IN6P_RTHDRDSTOPTS|\
IN6P_TCLASS|IN6P_AUTOFLOWLABEL|IN6P_RFC2292|\
IN6P_MTU)
/*
* Flags for inp_flags2.
*/
#define INP_2UNUSED1 0x00000001
#define INP_2UNUSED2 0x00000002
#define INP_PCBGROUPWILD 0x00000004 /* in pcbgroup wildcard list */
#define INP_REUSEPORT 0x00000008 /* SO_REUSEPORT option is set */
#define INP_FREED 0x00000010 /* inp itself is not valid */
#define INP_REUSEADDR 0x00000020 /* SO_REUSEADDR option is set */
#define INP_BINDMULTI 0x00000040 /* IP_BINDMULTI option is set */
#define INP_RSS_BUCKET_SET 0x00000080 /* IP_RSS_LISTEN_BUCKET is set */
#define INP_RECVFLOWID 0x00000100 /* populate recv datagram with flow info */
#define INP_RECVRSSBUCKETID 0x00000200 /* populate recv datagram with bucket id */
#define INP_RATE_LIMIT_CHANGED 0x00000400 /* rate limit needs attention */
#define INP_ORIGDSTADDR 0x00000800 /* receive IP dst address/port */
#define INP_CANNOT_DO_ECN 0x00001000 /* The stack does not do ECN */
#define INP_REUSEPORT_LB 0x00002000 /* SO_REUSEPORT_LB option is set */
#define INP_SUPPORTS_MBUFQ 0x00004000 /* Supports the mbuf queue method of LRO */
#define INP_MBUF_QUEUE_READY 0x00008000 /* The transport is pacing, inputs can be queued */
#define INP_DONT_SACK_QUEUE 0x00010000 /* If a sack arrives do not wake me */
#define INP_2PCP_SET 0x00020000 /* If the Eth PCP should be set explicitly */
#define INP_2PCP_BIT0 0x00040000 /* Eth PCP Bit 0 */
#define INP_2PCP_BIT1 0x00080000 /* Eth PCP Bit 1 */
#define INP_2PCP_BIT2 0x00100000 /* Eth PCP Bit 2 */
#define INP_2PCP_BASE INP_2PCP_BIT0
#define INP_2PCP_MASK (INP_2PCP_BIT0 | INP_2PCP_BIT1 | INP_2PCP_BIT2)
#define INP_2PCP_SHIFT 18 /* shift PCP field in/out of inp_flags2 */
/*
* Flags passed to in_pcblookup*() functions.
*/
#define INPLOOKUP_WILDCARD 0x00000001 /* Allow wildcard sockets. */
#define INPLOOKUP_RLOCKPCB 0x00000002 /* Return inpcb read-locked. */
#define INPLOOKUP_WLOCKPCB 0x00000004 /* Return inpcb write-locked. */
#define INPLOOKUP_MASK (INPLOOKUP_WILDCARD | INPLOOKUP_RLOCKPCB | \
INPLOOKUP_WLOCKPCB)
#define sotoinpcb(so) ((struct inpcb *)(so)->so_pcb)
#define INP_SOCKAF(so) so->so_proto->pr_domain->dom_family
#define INP_CHECK_SOCKAF(so, af) (INP_SOCKAF(so) == af)
/*
* Constants for pcbinfo.ipi_hashfields.
*/
#define IPI_HASHFIELDS_NONE 0
#define IPI_HASHFIELDS_2TUPLE 1
#define IPI_HASHFIELDS_4TUPLE 2
#ifdef _KERNEL
VNET_DECLARE(int, ipport_reservedhigh);
VNET_DECLARE(int, ipport_reservedlow);
VNET_DECLARE(int, ipport_lowfirstauto);
VNET_DECLARE(int, ipport_lowlastauto);
VNET_DECLARE(int, ipport_firstauto);
VNET_DECLARE(int, ipport_lastauto);
VNET_DECLARE(int, ipport_hifirstauto);
VNET_DECLARE(int, ipport_hilastauto);
VNET_DECLARE(int, ipport_randomized);
VNET_DECLARE(int, ipport_randomcps);
VNET_DECLARE(int, ipport_randomtime);
VNET_DECLARE(int, ipport_stoprandom);
VNET_DECLARE(int, ipport_tcpallocs);
#define V_ipport_reservedhigh VNET(ipport_reservedhigh)
#define V_ipport_reservedlow VNET(ipport_reservedlow)
#define V_ipport_lowfirstauto VNET(ipport_lowfirstauto)
#define V_ipport_lowlastauto VNET(ipport_lowlastauto)
#define V_ipport_firstauto VNET(ipport_firstauto)
#define V_ipport_lastauto VNET(ipport_lastauto)
#define V_ipport_hifirstauto VNET(ipport_hifirstauto)
#define V_ipport_hilastauto VNET(ipport_hilastauto)
#define V_ipport_randomized VNET(ipport_randomized)
#define V_ipport_randomcps VNET(ipport_randomcps)
#define V_ipport_randomtime VNET(ipport_randomtime)
#define V_ipport_stoprandom VNET(ipport_stoprandom)
#define V_ipport_tcpallocs VNET(ipport_tcpallocs)
void in_pcbinfo_destroy(struct inpcbinfo *);
void in_pcbinfo_init(struct inpcbinfo *, const char *, struct inpcbhead *,
int, int, char *, uma_init, u_int);
int in_pcbbind_check_bindmulti(const struct inpcb *ni,
const struct inpcb *oi);
struct inpcbgroup *
in_pcbgroup_byhash(struct inpcbinfo *, u_int, uint32_t);
struct inpcbgroup *
in_pcbgroup_byinpcb(struct inpcb *);
struct inpcbgroup *
in_pcbgroup_bytuple(struct inpcbinfo *, struct in_addr, u_short,
struct in_addr, u_short);
void in_pcbgroup_destroy(struct inpcbinfo *);
int in_pcbgroup_enabled(struct inpcbinfo *);
void in_pcbgroup_init(struct inpcbinfo *, u_int, int);
void in_pcbgroup_remove(struct inpcb *);
void in_pcbgroup_update(struct inpcb *);
void in_pcbgroup_update_mbuf(struct inpcb *, struct mbuf *);
void in_pcbpurgeif0(struct inpcbinfo *, struct ifnet *);
int in_pcballoc(struct socket *, struct inpcbinfo *);
int in_pcbbind(struct inpcb *, struct sockaddr *, struct ucred *);
int in_pcb_lport_dest(struct inpcb *inp, struct sockaddr *lsa,
u_short *lportp, struct sockaddr *fsa, u_short fport,
struct ucred *cred, int lookupflags);
int in_pcb_lport(struct inpcb *, struct in_addr *, u_short *,
struct ucred *, int);
int in_pcbbind_setup(struct inpcb *, struct sockaddr *, in_addr_t *,
u_short *, struct ucred *);
int in_pcbconnect(struct inpcb *, struct sockaddr *, struct ucred *);
int in_pcbconnect_mbuf(struct inpcb *, struct sockaddr *, struct ucred *,
struct mbuf *, bool);
int in_pcbconnect_setup(struct inpcb *, struct sockaddr *, in_addr_t *,
u_short *, in_addr_t *, u_short *, struct inpcb **,
struct ucred *);
void in_pcbdetach(struct inpcb *);
void in_pcbdisconnect(struct inpcb *);
void in_pcbdrop(struct inpcb *);
void in_pcbfree(struct inpcb *);
int in_pcbinshash(struct inpcb *);
int in_pcbinshash_mbuf(struct inpcb *, struct mbuf *);
int in_pcbladdr(struct inpcb *, struct in_addr *, struct in_addr *,
struct ucred *);
int in_pcblbgroup_numa(struct inpcb *, int arg);
struct inpcb *
in_pcblookup_local(struct inpcbinfo *,
struct in_addr, u_short, int, struct ucred *);
struct inpcb *
in_pcblookup(struct inpcbinfo *, struct in_addr, u_int,
struct in_addr, u_int, int, struct ifnet *);
struct inpcb *
in_pcblookup_mbuf(struct inpcbinfo *, struct in_addr, u_int,
struct in_addr, u_int, int, struct ifnet *, struct mbuf *);
void in_pcbnotifyall(struct inpcbinfo *pcbinfo, struct in_addr,
int, struct inpcb *(*)(struct inpcb *, int));
void in_pcbref(struct inpcb *);
void in_pcbrehash(struct inpcb *);
void in_pcbrehash_mbuf(struct inpcb *, struct mbuf *);
int in_pcbrele(struct inpcb *);
int in_pcbrele_rlocked(struct inpcb *);
int in_pcbrele_wlocked(struct inpcb *);
void in_pcblist_rele_rlocked(epoch_context_t ctx);
void in_losing(struct inpcb *);
void in_pcbsetsolabel(struct socket *so);
int in_getpeeraddr(struct socket *so, struct sockaddr **nam);
int in_getsockaddr(struct socket *so, struct sockaddr **nam);
struct sockaddr *
in_sockaddr(in_port_t port, struct in_addr *addr);
void in_pcbsosetlabel(struct socket *so);
#ifdef RATELIMIT
int
in_pcboutput_txrtlmt_locked(struct inpcb *, struct ifnet *,
struct mbuf *, uint32_t);
int in_pcbattach_txrtlmt(struct inpcb *, struct ifnet *, uint32_t, uint32_t,
uint32_t, struct m_snd_tag **);
void in_pcbdetach_txrtlmt(struct inpcb *);
void in_pcbdetach_tag(struct m_snd_tag *);
int in_pcbmodify_txrtlmt(struct inpcb *, uint32_t);
int in_pcbquery_txrtlmt(struct inpcb *, uint32_t *);
int in_pcbquery_txrlevel(struct inpcb *, uint32_t *);
void in_pcboutput_txrtlmt(struct inpcb *, struct ifnet *, struct mbuf *);
void in_pcboutput_eagain(struct inpcb *);
#endif
#endif /* _KERNEL */
#endif /* !_NETINET_IN_PCB_H_ */