a18c284294
this driver to compile and limp along with the new layer. These changes do not deal with proper locking around access to the HW. This is only a starting point. I have not tested modem control but tip seems to work okay and I can send and receive characters which I needed for one of my -current boxes. I have not tied this driver back up to the build since I don't want people to think it is ready for prime time. If anyone else has some cycles to work on this feel free to! Also add support for a 16 port PCI interface I have at work. Glanced at by: ed
1166 lines
32 KiB
C
1166 lines
32 KiB
C
/*-
|
|
* Copyright (c) Comtrol Corporation <support@comtrol.com>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted prodived that the follwoing conditions
|
|
* are met.
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notive, this list of conditions and the following disclainer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials prodided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Comtrol Corporation.
|
|
* 4. The name of Comtrol Corporation may not be used to endorse or
|
|
* promote products derived from this software without specific
|
|
* prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY COMTROL CORPORATION ``AS IS'' AND ANY
|
|
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL COMTROL CORPORATION BE LIABLE FOR
|
|
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, LIFE OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
/*
|
|
* rp.c - for RocketPort FreeBSD
|
|
*/
|
|
|
|
#include "opt_compat.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/endian.h>
|
|
#include <sys/fcntl.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/serial.h>
|
|
#include <sys/tty.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/kernel.h>
|
|
#include <machine/resource.h>
|
|
#include <machine/bus.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/rman.h>
|
|
|
|
#define ROCKET_C
|
|
#include <dev/rp/rpreg.h>
|
|
#include <dev/rp/rpvar.h>
|
|
|
|
static const char RocketPortVersion[] = "3.02";
|
|
|
|
static Byte_t RData[RDATASIZE] =
|
|
{
|
|
0x00, 0x09, 0xf6, 0x82,
|
|
0x02, 0x09, 0x86, 0xfb,
|
|
0x04, 0x09, 0x00, 0x0a,
|
|
0x06, 0x09, 0x01, 0x0a,
|
|
0x08, 0x09, 0x8a, 0x13,
|
|
0x0a, 0x09, 0xc5, 0x11,
|
|
0x0c, 0x09, 0x86, 0x85,
|
|
0x0e, 0x09, 0x20, 0x0a,
|
|
0x10, 0x09, 0x21, 0x0a,
|
|
0x12, 0x09, 0x41, 0xff,
|
|
0x14, 0x09, 0x82, 0x00,
|
|
0x16, 0x09, 0x82, 0x7b,
|
|
0x18, 0x09, 0x8a, 0x7d,
|
|
0x1a, 0x09, 0x88, 0x81,
|
|
0x1c, 0x09, 0x86, 0x7a,
|
|
0x1e, 0x09, 0x84, 0x81,
|
|
0x20, 0x09, 0x82, 0x7c,
|
|
0x22, 0x09, 0x0a, 0x0a
|
|
};
|
|
|
|
static Byte_t RRegData[RREGDATASIZE]=
|
|
{
|
|
0x00, 0x09, 0xf6, 0x82, /* 00: Stop Rx processor */
|
|
0x08, 0x09, 0x8a, 0x13, /* 04: Tx software flow control */
|
|
0x0a, 0x09, 0xc5, 0x11, /* 08: XON char */
|
|
0x0c, 0x09, 0x86, 0x85, /* 0c: XANY */
|
|
0x12, 0x09, 0x41, 0xff, /* 10: Rx mask char */
|
|
0x14, 0x09, 0x82, 0x00, /* 14: Compare/Ignore #0 */
|
|
0x16, 0x09, 0x82, 0x7b, /* 18: Compare #1 */
|
|
0x18, 0x09, 0x8a, 0x7d, /* 1c: Compare #2 */
|
|
0x1a, 0x09, 0x88, 0x81, /* 20: Interrupt #1 */
|
|
0x1c, 0x09, 0x86, 0x7a, /* 24: Ignore/Replace #1 */
|
|
0x1e, 0x09, 0x84, 0x81, /* 28: Interrupt #2 */
|
|
0x20, 0x09, 0x82, 0x7c, /* 2c: Ignore/Replace #2 */
|
|
0x22, 0x09, 0x0a, 0x0a /* 30: Rx FIFO Enable */
|
|
};
|
|
|
|
#if 0
|
|
/* IRQ number to MUDBAC register 2 mapping */
|
|
Byte_t sIRQMap[16] =
|
|
{
|
|
0,0,0,0x10,0x20,0x30,0,0,0,0x40,0x50,0x60,0x70,0,0,0x80
|
|
};
|
|
#endif
|
|
|
|
Byte_t rp_sBitMapClrTbl[8] =
|
|
{
|
|
0xfe,0xfd,0xfb,0xf7,0xef,0xdf,0xbf,0x7f
|
|
};
|
|
|
|
Byte_t rp_sBitMapSetTbl[8] =
|
|
{
|
|
0x01,0x02,0x04,0x08,0x10,0x20,0x40,0x80
|
|
};
|
|
|
|
static void rpfree(void *);
|
|
|
|
/***************************************************************************
|
|
Function: sReadAiopID
|
|
Purpose: Read the AIOP idenfication number directly from an AIOP.
|
|
Call: sReadAiopID(CtlP, aiop)
|
|
CONTROLLER_T *CtlP; Ptr to controller structure
|
|
int aiop: AIOP index
|
|
Return: int: Flag AIOPID_XXXX if a valid AIOP is found, where X
|
|
is replace by an identifying number.
|
|
Flag AIOPID_NULL if no valid AIOP is found
|
|
Warnings: No context switches are allowed while executing this function.
|
|
|
|
*/
|
|
int sReadAiopID(CONTROLLER_T *CtlP, int aiop)
|
|
{
|
|
Byte_t AiopID; /* ID byte from AIOP */
|
|
|
|
rp_writeaiop1(CtlP, aiop, _CMD_REG, RESET_ALL); /* reset AIOP */
|
|
rp_writeaiop1(CtlP, aiop, _CMD_REG, 0x0);
|
|
AiopID = rp_readaiop1(CtlP, aiop, _CHN_STAT0) & 0x07;
|
|
if(AiopID == 0x06)
|
|
return(1);
|
|
else /* AIOP does not exist */
|
|
return(-1);
|
|
}
|
|
|
|
/***************************************************************************
|
|
Function: sReadAiopNumChan
|
|
Purpose: Read the number of channels available in an AIOP directly from
|
|
an AIOP.
|
|
Call: sReadAiopNumChan(CtlP, aiop)
|
|
CONTROLLER_T *CtlP; Ptr to controller structure
|
|
int aiop: AIOP index
|
|
Return: int: The number of channels available
|
|
Comments: The number of channels is determined by write/reads from identical
|
|
offsets within the SRAM address spaces for channels 0 and 4.
|
|
If the channel 4 space is mirrored to channel 0 it is a 4 channel
|
|
AIOP, otherwise it is an 8 channel.
|
|
Warnings: No context switches are allowed while executing this function.
|
|
*/
|
|
int sReadAiopNumChan(CONTROLLER_T *CtlP, int aiop)
|
|
{
|
|
Word_t x, y;
|
|
|
|
rp_writeaiop4(CtlP, aiop, _INDX_ADDR,0x12340000L); /* write to chan 0 SRAM */
|
|
rp_writeaiop2(CtlP, aiop, _INDX_ADDR,0); /* read from SRAM, chan 0 */
|
|
x = rp_readaiop2(CtlP, aiop, _INDX_DATA);
|
|
rp_writeaiop2(CtlP, aiop, _INDX_ADDR,0x4000); /* read from SRAM, chan 4 */
|
|
y = rp_readaiop2(CtlP, aiop, _INDX_DATA);
|
|
if(x != y) /* if different must be 8 chan */
|
|
return(8);
|
|
else
|
|
return(4);
|
|
}
|
|
|
|
/***************************************************************************
|
|
Function: sInitChan
|
|
Purpose: Initialization of a channel and channel structure
|
|
Call: sInitChan(CtlP,ChP,AiopNum,ChanNum)
|
|
CONTROLLER_T *CtlP; Ptr to controller structure
|
|
CHANNEL_T *ChP; Ptr to channel structure
|
|
int AiopNum; AIOP number within controller
|
|
int ChanNum; Channel number within AIOP
|
|
Return: int: TRUE if initialization succeeded, FALSE if it fails because channel
|
|
number exceeds number of channels available in AIOP.
|
|
Comments: This function must be called before a channel can be used.
|
|
Warnings: No range checking on any of the parameters is done.
|
|
|
|
No context switches are allowed while executing this function.
|
|
*/
|
|
int sInitChan( CONTROLLER_T *CtlP,
|
|
CHANNEL_T *ChP,
|
|
int AiopNum,
|
|
int ChanNum)
|
|
{
|
|
int i, ChOff;
|
|
Byte_t *ChR;
|
|
static Byte_t R[4];
|
|
|
|
if(ChanNum >= CtlP->AiopNumChan[AiopNum])
|
|
return(FALSE); /* exceeds num chans in AIOP */
|
|
|
|
/* Channel, AIOP, and controller identifiers */
|
|
ChP->CtlP = CtlP;
|
|
ChP->ChanID = CtlP->AiopID[AiopNum];
|
|
ChP->AiopNum = AiopNum;
|
|
ChP->ChanNum = ChanNum;
|
|
|
|
/* Initialize the channel from the RData array */
|
|
for(i=0; i < RDATASIZE; i+=4)
|
|
{
|
|
R[0] = RData[i];
|
|
R[1] = RData[i+1] + 0x10 * ChanNum;
|
|
R[2] = RData[i+2];
|
|
R[3] = RData[i+3];
|
|
rp_writech4(ChP,_INDX_ADDR,le32dec(R));
|
|
}
|
|
|
|
ChR = ChP->R;
|
|
for(i=0; i < RREGDATASIZE; i+=4)
|
|
{
|
|
ChR[i] = RRegData[i];
|
|
ChR[i+1] = RRegData[i+1] + 0x10 * ChanNum;
|
|
ChR[i+2] = RRegData[i+2];
|
|
ChR[i+3] = RRegData[i+3];
|
|
}
|
|
|
|
/* Indexed registers */
|
|
ChOff = (Word_t)ChanNum * 0x1000;
|
|
|
|
ChP->BaudDiv[0] = (Byte_t)(ChOff + _BAUD);
|
|
ChP->BaudDiv[1] = (Byte_t)((ChOff + _BAUD) >> 8);
|
|
ChP->BaudDiv[2] = (Byte_t)BRD9600;
|
|
ChP->BaudDiv[3] = (Byte_t)(BRD9600 >> 8);
|
|
rp_writech4(ChP,_INDX_ADDR,le32dec(ChP->BaudDiv));
|
|
|
|
ChP->TxControl[0] = (Byte_t)(ChOff + _TX_CTRL);
|
|
ChP->TxControl[1] = (Byte_t)((ChOff + _TX_CTRL) >> 8);
|
|
ChP->TxControl[2] = 0;
|
|
ChP->TxControl[3] = 0;
|
|
rp_writech4(ChP,_INDX_ADDR,le32dec(ChP->TxControl));
|
|
|
|
ChP->RxControl[0] = (Byte_t)(ChOff + _RX_CTRL);
|
|
ChP->RxControl[1] = (Byte_t)((ChOff + _RX_CTRL) >> 8);
|
|
ChP->RxControl[2] = 0;
|
|
ChP->RxControl[3] = 0;
|
|
rp_writech4(ChP,_INDX_ADDR,le32dec(ChP->RxControl));
|
|
|
|
ChP->TxEnables[0] = (Byte_t)(ChOff + _TX_ENBLS);
|
|
ChP->TxEnables[1] = (Byte_t)((ChOff + _TX_ENBLS) >> 8);
|
|
ChP->TxEnables[2] = 0;
|
|
ChP->TxEnables[3] = 0;
|
|
rp_writech4(ChP,_INDX_ADDR,le32dec(ChP->TxEnables));
|
|
|
|
ChP->TxCompare[0] = (Byte_t)(ChOff + _TXCMP1);
|
|
ChP->TxCompare[1] = (Byte_t)((ChOff + _TXCMP1) >> 8);
|
|
ChP->TxCompare[2] = 0;
|
|
ChP->TxCompare[3] = 0;
|
|
rp_writech4(ChP,_INDX_ADDR,le32dec(ChP->TxCompare));
|
|
|
|
ChP->TxReplace1[0] = (Byte_t)(ChOff + _TXREP1B1);
|
|
ChP->TxReplace1[1] = (Byte_t)((ChOff + _TXREP1B1) >> 8);
|
|
ChP->TxReplace1[2] = 0;
|
|
ChP->TxReplace1[3] = 0;
|
|
rp_writech4(ChP,_INDX_ADDR,le32dec(ChP->TxReplace1));
|
|
|
|
ChP->TxReplace2[0] = (Byte_t)(ChOff + _TXREP2);
|
|
ChP->TxReplace2[1] = (Byte_t)((ChOff + _TXREP2) >> 8);
|
|
ChP->TxReplace2[2] = 0;
|
|
ChP->TxReplace2[3] = 0;
|
|
rp_writech4(ChP,_INDX_ADDR,le32dec(ChP->TxReplace2));
|
|
|
|
ChP->TxFIFOPtrs = ChOff + _TXF_OUTP;
|
|
ChP->TxFIFO = ChOff + _TX_FIFO;
|
|
|
|
rp_writech1(ChP,_CMD_REG,(Byte_t)ChanNum | RESTXFCNT); /* apply reset Tx FIFO count */
|
|
rp_writech1(ChP,_CMD_REG,(Byte_t)ChanNum); /* remove reset Tx FIFO count */
|
|
rp_writech2(ChP,_INDX_ADDR,ChP->TxFIFOPtrs); /* clear Tx in/out ptrs */
|
|
rp_writech2(ChP,_INDX_DATA,0);
|
|
ChP->RxFIFOPtrs = ChOff + _RXF_OUTP;
|
|
ChP->RxFIFO = ChOff + _RX_FIFO;
|
|
|
|
rp_writech1(ChP,_CMD_REG,(Byte_t)ChanNum | RESRXFCNT); /* apply reset Rx FIFO count */
|
|
rp_writech1(ChP,_CMD_REG,(Byte_t)ChanNum); /* remove reset Rx FIFO count */
|
|
rp_writech2(ChP,_INDX_ADDR,ChP->RxFIFOPtrs); /* clear Rx out ptr */
|
|
rp_writech2(ChP,_INDX_DATA,0);
|
|
rp_writech2(ChP,_INDX_ADDR,ChP->RxFIFOPtrs + 2); /* clear Rx in ptr */
|
|
rp_writech2(ChP,_INDX_DATA,0);
|
|
ChP->TxPrioCnt = ChOff + _TXP_CNT;
|
|
rp_writech2(ChP,_INDX_ADDR,ChP->TxPrioCnt);
|
|
rp_writech1(ChP,_INDX_DATA,0);
|
|
ChP->TxPrioPtr = ChOff + _TXP_PNTR;
|
|
rp_writech2(ChP,_INDX_ADDR,ChP->TxPrioPtr);
|
|
rp_writech1(ChP,_INDX_DATA,0);
|
|
ChP->TxPrioBuf = ChOff + _TXP_BUF;
|
|
sEnRxProcessor(ChP); /* start the Rx processor */
|
|
|
|
return(TRUE);
|
|
}
|
|
|
|
/***************************************************************************
|
|
Function: sStopRxProcessor
|
|
Purpose: Stop the receive processor from processing a channel.
|
|
Call: sStopRxProcessor(ChP)
|
|
CHANNEL_T *ChP; Ptr to channel structure
|
|
|
|
Comments: The receive processor can be started again with sStartRxProcessor().
|
|
This function causes the receive processor to skip over the
|
|
stopped channel. It does not stop it from processing other channels.
|
|
|
|
Warnings: No context switches are allowed while executing this function.
|
|
|
|
Do not leave the receive processor stopped for more than one
|
|
character time.
|
|
|
|
After calling this function a delay of 4 uS is required to ensure
|
|
that the receive processor is no longer processing this channel.
|
|
*/
|
|
void sStopRxProcessor(CHANNEL_T *ChP)
|
|
{
|
|
Byte_t R[4];
|
|
|
|
R[0] = ChP->R[0];
|
|
R[1] = ChP->R[1];
|
|
R[2] = 0x0a;
|
|
R[3] = ChP->R[3];
|
|
rp_writech4(ChP,_INDX_ADDR,le32dec(R));
|
|
}
|
|
|
|
/***************************************************************************
|
|
Function: sFlushRxFIFO
|
|
Purpose: Flush the Rx FIFO
|
|
Call: sFlushRxFIFO(ChP)
|
|
CHANNEL_T *ChP; Ptr to channel structure
|
|
Return: void
|
|
Comments: To prevent data from being enqueued or dequeued in the Tx FIFO
|
|
while it is being flushed the receive processor is stopped
|
|
and the transmitter is disabled. After these operations a
|
|
4 uS delay is done before clearing the pointers to allow
|
|
the receive processor to stop. These items are handled inside
|
|
this function.
|
|
Warnings: No context switches are allowed while executing this function.
|
|
*/
|
|
void sFlushRxFIFO(CHANNEL_T *ChP)
|
|
{
|
|
int i;
|
|
Byte_t Ch; /* channel number within AIOP */
|
|
int RxFIFOEnabled; /* TRUE if Rx FIFO enabled */
|
|
|
|
if(sGetRxCnt(ChP) == 0) /* Rx FIFO empty */
|
|
return; /* don't need to flush */
|
|
|
|
RxFIFOEnabled = FALSE;
|
|
if(ChP->R[0x32] == 0x08) /* Rx FIFO is enabled */
|
|
{
|
|
RxFIFOEnabled = TRUE;
|
|
sDisRxFIFO(ChP); /* disable it */
|
|
for(i=0; i < 2000/200; i++) /* delay 2 uS to allow proc to disable FIFO*/
|
|
rp_readch1(ChP,_INT_CHAN); /* depends on bus i/o timing */
|
|
}
|
|
sGetChanStatus(ChP); /* clear any pending Rx errors in chan stat */
|
|
Ch = (Byte_t)sGetChanNum(ChP);
|
|
rp_writech1(ChP,_CMD_REG,Ch | RESRXFCNT); /* apply reset Rx FIFO count */
|
|
rp_writech1(ChP,_CMD_REG,Ch); /* remove reset Rx FIFO count */
|
|
rp_writech2(ChP,_INDX_ADDR,ChP->RxFIFOPtrs); /* clear Rx out ptr */
|
|
rp_writech2(ChP,_INDX_DATA,0);
|
|
rp_writech2(ChP,_INDX_ADDR,ChP->RxFIFOPtrs + 2); /* clear Rx in ptr */
|
|
rp_writech2(ChP,_INDX_DATA,0);
|
|
if(RxFIFOEnabled)
|
|
sEnRxFIFO(ChP); /* enable Rx FIFO */
|
|
}
|
|
|
|
/***************************************************************************
|
|
Function: sFlushTxFIFO
|
|
Purpose: Flush the Tx FIFO
|
|
Call: sFlushTxFIFO(ChP)
|
|
CHANNEL_T *ChP; Ptr to channel structure
|
|
Return: void
|
|
Comments: To prevent data from being enqueued or dequeued in the Tx FIFO
|
|
while it is being flushed the receive processor is stopped
|
|
and the transmitter is disabled. After these operations a
|
|
4 uS delay is done before clearing the pointers to allow
|
|
the receive processor to stop. These items are handled inside
|
|
this function.
|
|
Warnings: No context switches are allowed while executing this function.
|
|
*/
|
|
void sFlushTxFIFO(CHANNEL_T *ChP)
|
|
{
|
|
int i;
|
|
Byte_t Ch; /* channel number within AIOP */
|
|
int TxEnabled; /* TRUE if transmitter enabled */
|
|
|
|
if(sGetTxCnt(ChP) == 0) /* Tx FIFO empty */
|
|
return; /* don't need to flush */
|
|
|
|
TxEnabled = FALSE;
|
|
if(ChP->TxControl[3] & TX_ENABLE)
|
|
{
|
|
TxEnabled = TRUE;
|
|
sDisTransmit(ChP); /* disable transmitter */
|
|
}
|
|
sStopRxProcessor(ChP); /* stop Rx processor */
|
|
for(i = 0; i < 4000/200; i++) /* delay 4 uS to allow proc to stop */
|
|
rp_readch1(ChP,_INT_CHAN); /* depends on bus i/o timing */
|
|
Ch = (Byte_t)sGetChanNum(ChP);
|
|
rp_writech1(ChP,_CMD_REG,Ch | RESTXFCNT); /* apply reset Tx FIFO count */
|
|
rp_writech1(ChP,_CMD_REG,Ch); /* remove reset Tx FIFO count */
|
|
rp_writech2(ChP,_INDX_ADDR,ChP->TxFIFOPtrs); /* clear Tx in/out ptrs */
|
|
rp_writech2(ChP,_INDX_DATA,0);
|
|
if(TxEnabled)
|
|
sEnTransmit(ChP); /* enable transmitter */
|
|
sStartRxProcessor(ChP); /* restart Rx processor */
|
|
}
|
|
|
|
/***************************************************************************
|
|
Function: sWriteTxPrioByte
|
|
Purpose: Write a byte of priority transmit data to a channel
|
|
Call: sWriteTxPrioByte(ChP,Data)
|
|
CHANNEL_T *ChP; Ptr to channel structure
|
|
Byte_t Data; The transmit data byte
|
|
|
|
Return: int: 1 if the bytes is successfully written, otherwise 0.
|
|
|
|
Comments: The priority byte is transmitted before any data in the Tx FIFO.
|
|
|
|
Warnings: No context switches are allowed while executing this function.
|
|
*/
|
|
int sWriteTxPrioByte(CHANNEL_T *ChP, Byte_t Data)
|
|
{
|
|
Byte_t DWBuf[4]; /* buffer for double word writes */
|
|
|
|
if(sGetTxCnt(ChP) > 1) /* write it to Tx priority buffer */
|
|
{
|
|
rp_writech2(ChP,_INDX_ADDR,ChP->TxPrioCnt); /* get priority buffer status */
|
|
if(rp_readch1(ChP,_INDX_DATA) & PRI_PEND) /* priority buffer busy */
|
|
return(0); /* nothing sent */
|
|
|
|
le16enc(DWBuf,ChP->TxPrioBuf); /* data byte address */
|
|
|
|
DWBuf[2] = Data; /* data byte value */
|
|
DWBuf[3] = 0; /* priority buffer pointer */
|
|
rp_writech4(ChP,_INDX_ADDR,le32dec(DWBuf)); /* write it out */
|
|
|
|
le16enc(DWBuf,ChP->TxPrioCnt); /* Tx priority count address */
|
|
|
|
DWBuf[2] = PRI_PEND + 1; /* indicate 1 byte pending */
|
|
DWBuf[3] = 0; /* priority buffer pointer */
|
|
rp_writech4(ChP,_INDX_ADDR,le32dec(DWBuf)); /* write it out */
|
|
}
|
|
else /* write it to Tx FIFO */
|
|
{
|
|
sWriteTxByte(ChP,sGetTxRxDataIO(ChP),Data);
|
|
}
|
|
return(1); /* 1 byte sent */
|
|
}
|
|
|
|
/***************************************************************************
|
|
Function: sEnInterrupts
|
|
Purpose: Enable one or more interrupts for a channel
|
|
Call: sEnInterrupts(ChP,Flags)
|
|
CHANNEL_T *ChP; Ptr to channel structure
|
|
Word_t Flags: Interrupt enable flags, can be any combination
|
|
of the following flags:
|
|
TXINT_EN: Interrupt on Tx FIFO empty
|
|
RXINT_EN: Interrupt on Rx FIFO at trigger level (see
|
|
sSetRxTrigger())
|
|
SRCINT_EN: Interrupt on SRC (Special Rx Condition)
|
|
MCINT_EN: Interrupt on modem input change
|
|
CHANINT_EN: Allow channel interrupt signal to the AIOP's
|
|
Interrupt Channel Register.
|
|
Return: void
|
|
Comments: If an interrupt enable flag is set in Flags, that interrupt will be
|
|
enabled. If an interrupt enable flag is not set in Flags, that
|
|
interrupt will not be changed. Interrupts can be disabled with
|
|
function sDisInterrupts().
|
|
|
|
This function sets the appropriate bit for the channel in the AIOP's
|
|
Interrupt Mask Register if the CHANINT_EN flag is set. This allows
|
|
this channel's bit to be set in the AIOP's Interrupt Channel Register.
|
|
|
|
Interrupts must also be globally enabled before channel interrupts
|
|
will be passed on to the host. This is done with function
|
|
sEnGlobalInt().
|
|
|
|
In some cases it may be desirable to disable interrupts globally but
|
|
enable channel interrupts. This would allow the global interrupt
|
|
status register to be used to determine which AIOPs need service.
|
|
*/
|
|
void sEnInterrupts(CHANNEL_T *ChP,Word_t Flags)
|
|
{
|
|
Byte_t Mask; /* Interrupt Mask Register */
|
|
|
|
ChP->RxControl[2] |=
|
|
((Byte_t)Flags & (RXINT_EN | SRCINT_EN | MCINT_EN));
|
|
|
|
rp_writech4(ChP,_INDX_ADDR,le32dec(ChP->RxControl));
|
|
|
|
ChP->TxControl[2] |= ((Byte_t)Flags & TXINT_EN);
|
|
|
|
rp_writech4(ChP,_INDX_ADDR,le32dec(ChP->TxControl));
|
|
|
|
if(Flags & CHANINT_EN)
|
|
{
|
|
Mask = rp_readch1(ChP,_INT_MASK) | rp_sBitMapSetTbl[ChP->ChanNum];
|
|
rp_writech1(ChP,_INT_MASK,Mask);
|
|
}
|
|
}
|
|
|
|
/***************************************************************************
|
|
Function: sDisInterrupts
|
|
Purpose: Disable one or more interrupts for a channel
|
|
Call: sDisInterrupts(ChP,Flags)
|
|
CHANNEL_T *ChP; Ptr to channel structure
|
|
Word_t Flags: Interrupt flags, can be any combination
|
|
of the following flags:
|
|
TXINT_EN: Interrupt on Tx FIFO empty
|
|
RXINT_EN: Interrupt on Rx FIFO at trigger level (see
|
|
sSetRxTrigger())
|
|
SRCINT_EN: Interrupt on SRC (Special Rx Condition)
|
|
MCINT_EN: Interrupt on modem input change
|
|
CHANINT_EN: Disable channel interrupt signal to the
|
|
AIOP's Interrupt Channel Register.
|
|
Return: void
|
|
Comments: If an interrupt flag is set in Flags, that interrupt will be
|
|
disabled. If an interrupt flag is not set in Flags, that
|
|
interrupt will not be changed. Interrupts can be enabled with
|
|
function sEnInterrupts().
|
|
|
|
This function clears the appropriate bit for the channel in the AIOP's
|
|
Interrupt Mask Register if the CHANINT_EN flag is set. This blocks
|
|
this channel's bit from being set in the AIOP's Interrupt Channel
|
|
Register.
|
|
*/
|
|
void sDisInterrupts(CHANNEL_T *ChP,Word_t Flags)
|
|
{
|
|
Byte_t Mask; /* Interrupt Mask Register */
|
|
|
|
ChP->RxControl[2] &=
|
|
~((Byte_t)Flags & (RXINT_EN | SRCINT_EN | MCINT_EN));
|
|
rp_writech4(ChP,_INDX_ADDR,le32dec(ChP->RxControl));
|
|
ChP->TxControl[2] &= ~((Byte_t)Flags & TXINT_EN);
|
|
rp_writech4(ChP,_INDX_ADDR,le32dec(ChP->TxControl));
|
|
|
|
if(Flags & CHANINT_EN)
|
|
{
|
|
Mask = rp_readch1(ChP,_INT_MASK) & rp_sBitMapClrTbl[ChP->ChanNum];
|
|
rp_writech1(ChP,_INT_MASK,Mask);
|
|
}
|
|
}
|
|
|
|
/*********************************************************************
|
|
Begin FreeBsd-specific driver code
|
|
**********************************************************************/
|
|
|
|
struct callout_handle rp_callout_handle;
|
|
|
|
static int rp_num_ports_open = 0;
|
|
static int rp_ndevs = 0;
|
|
|
|
static int rp_num_ports[4]; /* Number of ports on each controller */
|
|
|
|
#define POLL_INTERVAL 1
|
|
|
|
#define RP_ISMULTIPORT(dev) ((dev)->id_flags & 0x1)
|
|
#define RP_MPMASTER(dev) (((dev)->id_flags >> 8) & 0xff)
|
|
#define RP_NOTAST4(dev) ((dev)->id_flags & 0x04)
|
|
|
|
static struct rp_port *p_rp_addr[4];
|
|
static struct rp_port *p_rp_table[MAX_RP_PORTS];
|
|
#define rp_addr(unit) (p_rp_addr[unit])
|
|
#define rp_table(port) (p_rp_table[port])
|
|
|
|
/*
|
|
* The top-level routines begin here
|
|
*/
|
|
|
|
static void rpclose(struct tty *tp);
|
|
static void rphardclose(struct tty *tp);
|
|
static int rpmodem(struct tty *, int, int);
|
|
static int rpparam(struct tty *, struct termios *);
|
|
static void rpstart(struct tty *);
|
|
static int rpioctl(struct tty *, u_long, caddr_t, struct thread *);
|
|
static int rpopen(struct tty *);
|
|
|
|
static void rp_do_receive(struct rp_port *rp, struct tty *tp,
|
|
CHANNEL_t *cp, unsigned int ChanStatus)
|
|
{
|
|
unsigned int CharNStat;
|
|
int ToRecv, ch, err = 0;
|
|
|
|
ToRecv = sGetRxCnt(cp);
|
|
if(ToRecv == 0)
|
|
return;
|
|
|
|
/* If status indicates there are errored characters in the
|
|
FIFO, then enter status mode (a word in FIFO holds
|
|
characters and status)
|
|
*/
|
|
|
|
if(ChanStatus & (RXFOVERFL | RXBREAK | RXFRAME | RXPARITY)) {
|
|
if(!(ChanStatus & STATMODE)) {
|
|
ChanStatus |= STATMODE;
|
|
sEnRxStatusMode(cp);
|
|
}
|
|
}
|
|
/*
|
|
if we previously entered status mode then read down the
|
|
FIFO one word at a time, pulling apart the character and
|
|
the status. Update error counters depending on status.
|
|
*/
|
|
tty_lock(tp);
|
|
if(ChanStatus & STATMODE) {
|
|
while(ToRecv) {
|
|
CharNStat = rp_readch2(cp,sGetTxRxDataIO(cp));
|
|
ch = CharNStat & 0xff;
|
|
|
|
if((CharNStat & STMBREAK) || (CharNStat & STMFRAMEH))
|
|
err |= TRE_FRAMING;
|
|
else if (CharNStat & STMPARITYH)
|
|
err |= TRE_PARITY;
|
|
else if (CharNStat & STMRCVROVRH) {
|
|
rp->rp_overflows++;
|
|
err |= TRE_OVERRUN;
|
|
}
|
|
|
|
ttydisc_rint(tp, ch, err);
|
|
ToRecv--;
|
|
}
|
|
/*
|
|
After emtying FIFO in status mode, turn off status mode
|
|
*/
|
|
|
|
if(sGetRxCnt(cp) == 0) {
|
|
sDisRxStatusMode(cp);
|
|
}
|
|
} else {
|
|
ToRecv = sGetRxCnt(cp);
|
|
while (ToRecv) {
|
|
ch = rp_readch1(cp,sGetTxRxDataIO(cp));
|
|
ttydisc_rint(tp, ch & 0xff, err);
|
|
ToRecv--;
|
|
}
|
|
}
|
|
ttydisc_rint_done(tp);
|
|
tty_unlock(tp);
|
|
}
|
|
|
|
static void rp_handle_port(struct rp_port *rp)
|
|
{
|
|
CHANNEL_t *cp;
|
|
struct tty *tp;
|
|
unsigned int IntMask, ChanStatus;
|
|
|
|
if(!rp)
|
|
return;
|
|
|
|
cp = &rp->rp_channel;
|
|
tp = rp->rp_tty;
|
|
IntMask = sGetChanIntID(cp);
|
|
IntMask = IntMask & rp->rp_intmask;
|
|
ChanStatus = sGetChanStatus(cp);
|
|
if(IntMask & RXF_TRIG)
|
|
rp_do_receive(rp, tp, cp, ChanStatus);
|
|
if(IntMask & DELTA_CD) {
|
|
if(ChanStatus & CD_ACT) {
|
|
(void)ttydisc_modem(tp, 1);
|
|
} else {
|
|
(void)ttydisc_modem(tp, 0);
|
|
}
|
|
}
|
|
/* oldcts = rp->rp_cts;
|
|
rp->rp_cts = ((ChanStatus & CTS_ACT) != 0);
|
|
if(oldcts != rp->rp_cts) {
|
|
printf("CTS change (now %s)... on port %d\n", rp->rp_cts ? "on" : "off", rp->rp_port);
|
|
}
|
|
*/
|
|
}
|
|
|
|
static void rp_do_poll(void *not_used)
|
|
{
|
|
CONTROLLER_t *ctl;
|
|
struct rp_port *rp;
|
|
struct tty *tp;
|
|
int unit, aiop, ch, line, count;
|
|
unsigned char CtlMask, AiopMask;
|
|
|
|
for(unit = 0; unit < rp_ndevs; unit++) {
|
|
rp = rp_addr(unit);
|
|
ctl = rp->rp_ctlp;
|
|
CtlMask = ctl->ctlmask(ctl);
|
|
for(aiop=0; CtlMask; CtlMask >>=1, aiop++) {
|
|
if(CtlMask & 1) {
|
|
AiopMask = sGetAiopIntStatus(ctl, aiop);
|
|
for(ch = 0; AiopMask; AiopMask >>=1, ch++) {
|
|
if(AiopMask & 1) {
|
|
line = (unit << 5) | (aiop << 3) | ch;
|
|
rp = rp_table(line);
|
|
rp_handle_port(rp);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
for(line = 0, rp = rp_addr(unit); line < rp_num_ports[unit];
|
|
line++, rp++) {
|
|
tp = rp->rp_tty;
|
|
tty_lock(tp);
|
|
count = sGetTxCnt(&rp->rp_channel);
|
|
if (count >= 0 &&
|
|
(count <= rp->rp_restart)) {
|
|
rpstart(tp);
|
|
}
|
|
tty_unlock(tp);
|
|
}
|
|
}
|
|
if(rp_num_ports_open)
|
|
rp_callout_handle = timeout(rp_do_poll,
|
|
(void *)NULL, POLL_INTERVAL);
|
|
}
|
|
|
|
static struct ttydevsw rp_tty_class = {
|
|
.tsw_flags = TF_INITLOCK|TF_CALLOUT,
|
|
.tsw_open = rpopen,
|
|
.tsw_close = rpclose,
|
|
.tsw_outwakeup = rpstart,
|
|
.tsw_ioctl = rpioctl,
|
|
.tsw_param = rpparam,
|
|
.tsw_modem = rpmodem,
|
|
.tsw_free = rpfree,
|
|
};
|
|
|
|
|
|
static void
|
|
rpfree(void *softc)
|
|
{
|
|
struct rp_port *rp = softc;
|
|
CONTROLLER_t *ctlp = rp->rp_ctlp;
|
|
|
|
atomic_subtract_32(&ctlp->free, 1);
|
|
}
|
|
|
|
int
|
|
rp_attachcommon(CONTROLLER_T *ctlp, int num_aiops, int num_ports)
|
|
{
|
|
int unit;
|
|
int num_chan;
|
|
int aiop, chan, port;
|
|
int ChanStatus, line, count;
|
|
int retval;
|
|
struct rp_port *rp;
|
|
struct tty *tp;
|
|
|
|
unit = device_get_unit(ctlp->dev);
|
|
|
|
printf("RocketPort%d (Version %s) %d ports.\n", unit,
|
|
RocketPortVersion, num_ports);
|
|
rp_num_ports[unit] = num_ports;
|
|
callout_handle_init(&rp_callout_handle);
|
|
|
|
ctlp->rp = rp = (struct rp_port *)
|
|
malloc(sizeof(struct rp_port) * num_ports, M_DEVBUF, M_NOWAIT | M_ZERO);
|
|
if (rp == NULL) {
|
|
device_printf(ctlp->dev, "rp_attachcommon: Could not malloc rp_ports structures.\n");
|
|
retval = ENOMEM;
|
|
goto nogo;
|
|
}
|
|
|
|
count = unit * 32; /* board times max ports per card SG */
|
|
|
|
bzero(rp, sizeof(struct rp_port) * num_ports);
|
|
rp_addr(unit) = rp;
|
|
|
|
port = 0;
|
|
for(aiop=0; aiop < num_aiops; aiop++) {
|
|
num_chan = sGetAiopNumChan(ctlp, aiop);
|
|
for(chan=0; chan < num_chan; chan++, port++, rp++) {
|
|
rp->rp_tty = tp = tty_alloc(&rp_tty_class, rp, NULL);
|
|
rp->rp_port = port;
|
|
rp->rp_ctlp = ctlp;
|
|
rp->rp_unit = unit;
|
|
rp->rp_chan = chan;
|
|
rp->rp_aiop = aiop;
|
|
|
|
rp->rp_intmask = RXF_TRIG | TXFIFO_MT | SRC_INT |
|
|
DELTA_CD | DELTA_CTS | DELTA_DSR;
|
|
#ifdef notdef
|
|
ChanStatus = sGetChanStatus(&rp->rp_channel);
|
|
#endif /* notdef */
|
|
if(sInitChan(ctlp, &rp->rp_channel, aiop, chan) == 0) {
|
|
device_printf(ctlp->dev, "RocketPort sInitChan(%d, %d, %d) failed.\n",
|
|
unit, aiop, chan);
|
|
retval = ENXIO;
|
|
goto nogo;
|
|
}
|
|
ChanStatus = sGetChanStatus(&rp->rp_channel);
|
|
rp->rp_cts = (ChanStatus & CTS_ACT) != 0;
|
|
line = (unit << 5) | (aiop << 3) | chan;
|
|
rp_table(line) = rp;
|
|
tty_makedev(tp, NULL, "R%r%r", unit, port);
|
|
}
|
|
}
|
|
|
|
rp_ndevs++;
|
|
mtx_init(&ctlp->hwmtx, "rp_hwmtx", NULL, MTX_DEF);
|
|
ctlp->hwmtx_init = 1;
|
|
return (0);
|
|
|
|
nogo:
|
|
rp_releaseresource(ctlp);
|
|
|
|
return (retval);
|
|
}
|
|
|
|
void
|
|
rp_releaseresource(CONTROLLER_t *ctlp)
|
|
{
|
|
int i, unit;
|
|
struct rp_port *rp;
|
|
|
|
|
|
unit = device_get_unit(ctlp->dev);
|
|
if (rp_addr(unit) != NULL) {
|
|
for (i = 0; i < rp_num_ports[unit]; i++) {
|
|
rp = rp_addr(unit) + i;
|
|
atomic_add_32(&ctlp->free, 1);
|
|
tty_lock(rp->rp_tty);
|
|
tty_rel_gone(rp->rp_tty);
|
|
}
|
|
}
|
|
|
|
while (ctlp->free != 0) {
|
|
pause("rpwt", hz / 10);
|
|
}
|
|
|
|
if (ctlp->rp != NULL) {
|
|
for (i = 0 ; i < sizeof(p_rp_addr) / sizeof(*p_rp_addr) ; i++)
|
|
if (p_rp_addr[i] == ctlp->rp)
|
|
p_rp_addr[i] = NULL;
|
|
for (i = 0 ; i < sizeof(p_rp_table) / sizeof(*p_rp_table) ; i++)
|
|
if (p_rp_table[i] == ctlp->rp)
|
|
p_rp_table[i] = NULL;
|
|
free(ctlp->rp, M_DEVBUF);
|
|
ctlp->rp = NULL;
|
|
}
|
|
}
|
|
|
|
void
|
|
rp_untimeout(void)
|
|
{
|
|
untimeout(rp_do_poll, (void *)NULL, rp_callout_handle);
|
|
}
|
|
|
|
static int
|
|
rpopen(struct tty *tp)
|
|
{
|
|
struct rp_port *rp;
|
|
int flags;
|
|
unsigned int IntMask, ChanStatus;
|
|
|
|
rp = tty_softc(tp);
|
|
|
|
flags = 0;
|
|
flags |= SET_RTS;
|
|
flags |= SET_DTR;
|
|
rp->rp_channel.TxControl[3] =
|
|
((rp->rp_channel.TxControl[3]
|
|
& ~(SET_RTS | SET_DTR)) | flags);
|
|
rp_writech4(&rp->rp_channel,_INDX_ADDR,
|
|
le32dec(rp->rp_channel.TxControl));
|
|
sSetRxTrigger(&rp->rp_channel, TRIG_1);
|
|
sDisRxStatusMode(&rp->rp_channel);
|
|
sFlushRxFIFO(&rp->rp_channel);
|
|
sFlushTxFIFO(&rp->rp_channel);
|
|
|
|
sEnInterrupts(&rp->rp_channel,
|
|
(TXINT_EN|MCINT_EN|RXINT_EN|SRCINT_EN|CHANINT_EN));
|
|
sSetRxTrigger(&rp->rp_channel, TRIG_1);
|
|
|
|
sDisRxStatusMode(&rp->rp_channel);
|
|
sClrTxXOFF(&rp->rp_channel);
|
|
|
|
/* sDisRTSFlowCtl(&rp->rp_channel);
|
|
sDisCTSFlowCtl(&rp->rp_channel);
|
|
*/
|
|
sDisTxSoftFlowCtl(&rp->rp_channel);
|
|
|
|
sStartRxProcessor(&rp->rp_channel);
|
|
|
|
sEnRxFIFO(&rp->rp_channel);
|
|
sEnTransmit(&rp->rp_channel);
|
|
|
|
/* sSetDTR(&rp->rp_channel);
|
|
sSetRTS(&rp->rp_channel);
|
|
*/
|
|
|
|
rp_num_ports_open++;
|
|
|
|
IntMask = sGetChanIntID(&rp->rp_channel);
|
|
IntMask = IntMask & rp->rp_intmask;
|
|
ChanStatus = sGetChanStatus(&rp->rp_channel);
|
|
|
|
if(rp_num_ports_open == 1)
|
|
rp_callout_handle = timeout(rp_do_poll,
|
|
(void *)NULL, POLL_INTERVAL);
|
|
|
|
device_busy(rp->rp_ctlp->dev);
|
|
return(0);
|
|
}
|
|
|
|
static void
|
|
rpclose(struct tty *tp)
|
|
{
|
|
struct rp_port *rp;
|
|
|
|
rp = tty_softc(tp);
|
|
rphardclose(tp);
|
|
device_unbusy(rp->rp_ctlp->dev);
|
|
}
|
|
|
|
static void
|
|
rphardclose(struct tty *tp)
|
|
{
|
|
struct rp_port *rp;
|
|
CHANNEL_t *cp;
|
|
|
|
rp = tty_softc(tp);
|
|
cp = &rp->rp_channel;
|
|
|
|
sFlushRxFIFO(cp);
|
|
sFlushTxFIFO(cp);
|
|
sDisTransmit(cp);
|
|
sDisInterrupts(cp, TXINT_EN|MCINT_EN|RXINT_EN|SRCINT_EN|CHANINT_EN);
|
|
sDisRTSFlowCtl(cp);
|
|
sDisCTSFlowCtl(cp);
|
|
sDisTxSoftFlowCtl(cp);
|
|
sClrTxXOFF(cp);
|
|
|
|
#ifdef DJA
|
|
if(tp->t_cflag&HUPCL || !(tp->t_state&TS_ISOPEN) || !tp->t_actout) {
|
|
sClrDTR(cp);
|
|
}
|
|
if(ISCALLOUT(tp->t_dev)) {
|
|
sClrDTR(cp);
|
|
}
|
|
tp->t_actout = FALSE;
|
|
wakeup(&tp->t_actout);
|
|
wakeup(TSA_CARR_ON(tp));
|
|
#endif /* DJA */
|
|
}
|
|
|
|
static int
|
|
rpioctl(struct tty *tp, u_long cmd, caddr_t data, struct thread *td)
|
|
{
|
|
struct rp_port *rp;
|
|
|
|
rp = tty_softc(tp);
|
|
switch (cmd) {
|
|
case TIOCSBRK:
|
|
sSendBreak(&rp->rp_channel);
|
|
return (0);
|
|
case TIOCCBRK:
|
|
sClrBreak(&rp->rp_channel);
|
|
return (0);
|
|
default:
|
|
return ENOIOCTL;
|
|
}
|
|
}
|
|
|
|
static int
|
|
rpmodem(struct tty *tp, int sigon, int sigoff)
|
|
{
|
|
struct rp_port *rp;
|
|
int i, j, k;
|
|
|
|
rp = tty_softc(tp);
|
|
if (sigon != 0 || sigoff != 0) {
|
|
i = j = 0;
|
|
if (sigon & SER_DTR)
|
|
i = SET_DTR;
|
|
if (sigoff & SER_DTR)
|
|
j = SET_DTR;
|
|
if (sigon & SER_RTS)
|
|
i = SET_RTS;
|
|
if (sigoff & SER_RTS)
|
|
j = SET_RTS;
|
|
rp->rp_channel.TxControl[3] &= ~i;
|
|
rp->rp_channel.TxControl[3] |= j;
|
|
rp_writech4(&rp->rp_channel,_INDX_ADDR,
|
|
le32dec(rp->rp_channel.TxControl));
|
|
} else {
|
|
i = sGetChanStatusLo(&rp->rp_channel);
|
|
j = rp->rp_channel.TxControl[3];
|
|
k = 0;
|
|
if (j & SET_DTR)
|
|
k |= SER_DTR;
|
|
if (j & SET_RTS)
|
|
k |= SER_RTS;
|
|
if (i & CD_ACT)
|
|
k |= SER_DCD;
|
|
if (i & DSR_ACT)
|
|
k |= SER_DSR;
|
|
if (i & CTS_ACT)
|
|
k |= SER_CTS;
|
|
return(k);
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
static struct
|
|
{
|
|
int baud;
|
|
int conversion;
|
|
} baud_table[] = {
|
|
{B0, 0}, {B50, BRD50}, {B75, BRD75},
|
|
{B110, BRD110}, {B134, BRD134}, {B150, BRD150},
|
|
{B200, BRD200}, {B300, BRD300}, {B600, BRD600},
|
|
{B1200, BRD1200}, {B1800, BRD1800}, {B2400, BRD2400},
|
|
{B4800, BRD4800}, {B9600, BRD9600}, {B19200, BRD19200},
|
|
{B38400, BRD38400}, {B7200, BRD7200}, {B14400, BRD14400},
|
|
{B57600, BRD57600}, {B76800, BRD76800},
|
|
{B115200, BRD115200}, {B230400, BRD230400},
|
|
{-1, -1}
|
|
};
|
|
|
|
static int rp_convert_baud(int baud) {
|
|
int i;
|
|
|
|
for (i = 0; baud_table[i].baud >= 0; i++) {
|
|
if (baud_table[i].baud == baud)
|
|
break;
|
|
}
|
|
|
|
return baud_table[i].conversion;
|
|
}
|
|
|
|
static int
|
|
rpparam(tp, t)
|
|
struct tty *tp;
|
|
struct termios *t;
|
|
{
|
|
struct rp_port *rp;
|
|
CHANNEL_t *cp;
|
|
int cflag, iflag, oflag, lflag;
|
|
int ospeed;
|
|
#ifdef RPCLOCAL
|
|
int devshift;
|
|
#endif
|
|
|
|
rp = tty_softc(tp);
|
|
cp = &rp->rp_channel;
|
|
|
|
cflag = t->c_cflag;
|
|
#ifdef RPCLOCAL
|
|
devshift = umynor / 32;
|
|
devshift = 1 << devshift;
|
|
if ( devshift & RPCLOCAL ) {
|
|
cflag |= CLOCAL;
|
|
}
|
|
#endif
|
|
iflag = t->c_iflag;
|
|
oflag = t->c_oflag;
|
|
lflag = t->c_lflag;
|
|
|
|
ospeed = rp_convert_baud(t->c_ispeed);
|
|
if(ospeed < 0 || t->c_ispeed != t->c_ospeed)
|
|
return(EINVAL);
|
|
|
|
if(t->c_ospeed == 0) {
|
|
sClrDTR(cp);
|
|
return(0);
|
|
}
|
|
rp->rp_fifo_lw = ((t->c_ospeed*2) / 1000) +1;
|
|
|
|
/* Set baud rate ----- we only pay attention to ispeed */
|
|
sSetDTR(cp);
|
|
sSetRTS(cp);
|
|
sSetBaud(cp, ospeed);
|
|
|
|
if(cflag & CSTOPB) {
|
|
sSetStop2(cp);
|
|
} else {
|
|
sSetStop1(cp);
|
|
}
|
|
|
|
if(cflag & PARENB) {
|
|
sEnParity(cp);
|
|
if(cflag & PARODD) {
|
|
sSetOddParity(cp);
|
|
} else {
|
|
sSetEvenParity(cp);
|
|
}
|
|
}
|
|
else {
|
|
sDisParity(cp);
|
|
}
|
|
if((cflag & CSIZE) == CS8) {
|
|
sSetData8(cp);
|
|
rp->rp_imask = 0xFF;
|
|
} else {
|
|
sSetData7(cp);
|
|
rp->rp_imask = 0x7F;
|
|
}
|
|
|
|
if(iflag & ISTRIP) {
|
|
rp->rp_imask &= 0x7F;
|
|
}
|
|
|
|
if(cflag & CLOCAL) {
|
|
rp->rp_intmask &= ~DELTA_CD;
|
|
} else {
|
|
rp->rp_intmask |= DELTA_CD;
|
|
}
|
|
|
|
/* Put flow control stuff here */
|
|
|
|
if(cflag & CCTS_OFLOW) {
|
|
sEnCTSFlowCtl(cp);
|
|
} else {
|
|
sDisCTSFlowCtl(cp);
|
|
}
|
|
|
|
if(cflag & CRTS_IFLOW) {
|
|
rp->rp_rts_iflow = 1;
|
|
} else {
|
|
rp->rp_rts_iflow = 0;
|
|
}
|
|
|
|
if(cflag & CRTS_IFLOW) {
|
|
sEnRTSFlowCtl(cp);
|
|
} else {
|
|
sDisRTSFlowCtl(cp);
|
|
}
|
|
|
|
return(0);
|
|
}
|
|
|
|
static void
|
|
rpstart(struct tty *tp)
|
|
{
|
|
struct rp_port *rp;
|
|
CHANNEL_t *cp;
|
|
char flags;
|
|
int xmit_fifo_room;
|
|
int i, count, wcount;
|
|
|
|
rp = tty_softc(tp);
|
|
cp = &rp->rp_channel;
|
|
flags = rp->rp_channel.TxControl[3];
|
|
|
|
if(rp->rp_xmit_stopped) {
|
|
sEnTransmit(cp);
|
|
rp->rp_xmit_stopped = 0;
|
|
}
|
|
|
|
xmit_fifo_room = TXFIFO_SIZE - sGetTxCnt(cp);
|
|
count = ttydisc_getc(tp, &rp->TxBuf, xmit_fifo_room);
|
|
if(xmit_fifo_room > 0) {
|
|
for( i = 0, wcount = count >> 1; wcount > 0; i += 2, wcount-- ) {
|
|
rp_writech2(cp, sGetTxRxDataIO(cp), le16dec(&rp->TxBuf[i]));
|
|
}
|
|
if ( count & 1 ) {
|
|
rp_writech1(cp, sGetTxRxDataIO(cp), rp->TxBuf[(count-1)]);
|
|
}
|
|
}
|
|
}
|