adrian a1961a79d2 Fix the AR933x platform device start/stop code. ... This was ported from the AR724x code and I think that also doesn't quite work. I'll investigate that soon. With this in place the system reset path works, so 'reset' from kdb actually resets the SoC. Tested: * AP121 test board		2013-03-28 05:43:03 +00:00
..
apb.c	Move PMC hook invocation to cpu_intr. The idea is the same as with ast()	2012-03-22 17:47:52 +00:00
apbvar.h
ar71xx_bus_space_reversed.c
ar71xx_bus_space_reversed.h
ar71xx_chip.c	Add the reference clock for each supported chip.	2013-03-27 03:33:19 +00:00
ar71xx_chip.h	MII related infrastructure changes.	2012-05-02 01:21:57 +00:00
ar71xx_cpudef.h	Add the reference clock for each supported chip.	2013-03-27 03:33:19 +00:00
ar71xx_ehci.c	Implement better support for USB controller suspend and resume.	2011-12-14 00:28:54 +00:00
ar71xx_fixup.c	Introduce the matching PCI ath(4) fixup code from ar71xx_pci into	2012-04-20 08:26:05 +00:00
ar71xx_fixup.h	Introduce the matching PCI ath(4) fixup code from ar71xx_pci into	2012-04-20 08:26:05 +00:00
ar71xx_gpio.c	The GPIO drivers were initialising their mutexes with type of	2012-08-17 04:44:57 +00:00
ar71xx_gpiovar.h	Fix GPIO_MAXPINS calculation for the AR71xx, AR724x, AR913x SoC.	2011-05-06 02:45:02 +00:00
ar71xx_machdep.c	Remove platform APIs which are not used by any code and which had only stub	2012-03-12 07:34:15 +00:00
ar71xx_ohci.c	Implement better support for USB controller suspend and resume.	2011-12-14 00:28:54 +00:00
ar71xx_pci_bus_space.c
ar71xx_pci_bus_space.h
ar71xx_pci.c	Mips Atheros AR71XX: make PCI base slot configurable through hints.	2013-01-06 20:50:31 +00:00
ar71xx_setup.c	Remove duplicate header includes	2011-06-26 10:07:48 +00:00
ar71xx_setup.h	Preparation work for supporting the AR91xx and AR724x.	2010-08-19 02:03:12 +00:00
ar71xx_spi.c
ar71xx_wdog.c	Preparation work for supporting the AR91xx and AR724x.	2010-08-19 02:03:12 +00:00
ar71xxreg.h	Add a missing newline.	2012-05-02 06:17:16 +00:00
ar91xx_chip.c	Add the reference clock for each supported chip.	2013-03-27 03:33:19 +00:00
ar91xx_chip.h	Add initial Atheros AR91XX support.	2010-08-19 11:40:10 +00:00
ar91xxreg.h	Fix GPIO_MAXPINS calculation for the AR71xx, AR724x, AR913x SoC.	2011-05-06 02:45:02 +00:00
ar724x_chip.c	Add the reference clock for each supported chip.	2013-03-27 03:33:19 +00:00
ar724x_chip.h	Add some initial AR724X chipset support.	2010-08-19 11:53:55 +00:00
ar724x_pci.c	Ensure that BAR(0) is set for the PCI slot before the ath(4) PCI registers	2012-08-26 04:39:20 +00:00
ar724xreg.h	Fix GPIO_MAXPINS calculation for the AR71xx, AR724x, AR913x SoC.	2011-05-06 02:45:02 +00:00
ar933x_chip.c	Fix the AR933x platform device start/stop code.	2013-03-28 05:43:03 +00:00
ar933x_chip.h	Commit initial (unfinished!) support for the AR933x series of embedded	2013-03-27 03:38:58 +00:00
ar933x_uart.h	Commit initial (unfinished!) support for the AR933x series of embedded	2013-03-27 03:38:58 +00:00
ar933xreg.h	Commit initial (unfinished!) support for the AR933x series of embedded	2013-03-27 03:38:58 +00:00
files.ar71xx	Make MIPS24k PMC optional on "hwpmc_mips24k."	2012-11-17 04:10:42 +00:00
if_arge.c	Mechanically substitute flags from historic mbuf allocator with	2012-12-05 08:04:20 +00:00
if_argevar.h	Implement PLL configuration override support, similar to what openwrt	2012-05-02 07:43:11 +00:00
pcf2123_rtc.c	- Add driver for PCF2123, SPI real time clock/calendar	2010-01-22 22:14:12 +00:00
pcf2123reg.h	- Add driver for PCF2123, SPI real time clock/calendar	2010-01-22 22:14:12 +00:00
std.ar71xx	Assume a big-endian default on MIPS and drop the "eb" suffix from MACHINE_ARCH.	2012-03-29 02:54:35 +00:00
uart_bus_ar71xx.c	Preparation work for supporting the AR91xx and AR724x.	2010-08-19 02:03:12 +00:00
uart_cpu_ar71xx.c	Preparation work for supporting the AR91xx and AR724x.	2010-08-19 02:03:12 +00:00