freebsd-skq/sys/gnu/i386/fpemul/poly_div.s
John Polstra 9081eec1fb Make the necessary changes so that an ELF kernel can be built. I
have successfully built, booted, and run a number of different ELF
kernel configurations, including GENERIC.  LINT also builds and
links cleanly, though I have not tried to boot it.

The impact on developers is virtually nil, except for two things.
All linker sets that might possibly be present in the kernel must be
listed in "sys/i386/i386/setdefs.h".  And all C symbols that are
also referenced from assembly language code must be listed in
"sys/i386/include/asnames.h".  It so happens that failure to do
these things will have no impact on the a.out kernel.  But it will
break the build of the ELF kernel.

The ELF bootloader works, but it is not ready to commit quite yet.
1997-04-22 06:55:47 +00:00

139 lines
3.8 KiB
ArmAsm

.file "poly_div.S"
/*
* poly_div.S
*
* A set of functions to divide 64 bit integers by fixed numbers.
*
*
* Copyright (C) 1992,1993,1994
* W. Metzenthen, 22 Parker St, Ormond, Vic 3163,
* Australia. E-mail billm@vaxc.cc.monash.edu.au
* All rights reserved.
*
* This copyright notice covers the redistribution and use of the
* FPU emulator developed by W. Metzenthen. It covers only its use
* in the 386BSD, FreeBSD and NetBSD operating systems. Any other
* use is not permitted under this copyright.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must include information specifying
* that source code for the emulator is freely available and include
* either:
* a) an offer to provide the source code for a nominal distribution
* fee, or
* b) list at least two alternative methods whereby the source
* can be obtained, e.g. a publically accessible bulletin board
* and an anonymous ftp site from which the software can be
* downloaded.
* 3. All advertising materials specifically mentioning features or use of
* this emulator must acknowledge that it was developed by W. Metzenthen.
* 4. The name of W. Metzenthen may not be used to endorse or promote
* products derived from this software without specific prior written
* permission.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
* AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
* W. METZENTHEN BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
* PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*
* The purpose of this copyright, based upon the Berkeley copyright, is to
* ensure that the covered software remains freely available to everyone.
*
* The software (with necessary differences) is also available, but under
* the terms of the GNU copyleft, for the Linux operating system and for
* the djgpp ms-dos extender.
*
* W. Metzenthen June 1994.
*
*
* $Id: poly_div.s,v 1.6 1997/02/22 09:29:16 peter Exp $
*
*/
#include <gnu/i386/fpemul/fpu_asm.h>
.text
/*---------------------------------------------------------------------------*/
ENTRY(poly_div2)
pushl %ebp
movl %esp,%ebp
movl PARAM1,%ecx
movw (%ecx),%ax
shrl $1,4(%ecx)
rcrl $1,(%ecx)
testw $1,%ax
je poly_div2_exit
addl $1,(%ecx)
adcl $0,4(%ecx)
poly_div2_exit:
leave
ret
/*---------------------------------------------------------------------------*/
ENTRY(poly_div4)
pushl %ebp
movl %esp,%ebp
movl PARAM1,%ecx
movw (%ecx),%ax
movl 4(%ecx),%edx
shll $30,%edx
shrl $2,4(%ecx)
shrl $2,(%ecx)
orl %edx,(%ecx)
testw $2,%ax
je poly_div4_exit
addl $1,(%ecx)
adcl $0,4(%ecx)
poly_div4_exit:
leave
ret
/*---------------------------------------------------------------------------*/
ENTRY(poly_div16)
pushl %ebp
movl %esp,%ebp
movl PARAM1,%ecx
movw (%ecx),%ax
movl 4(%ecx),%edx
shll $28,%edx
shrl $4,4(%ecx)
shrl $4,(%ecx)
orl %edx,(%ecx)
testw $8,%ax
je poly_div16_exit
addl $1,(%ecx)
adcl $0,4(%ecx)
poly_div16_exit:
leave
ret
/*---------------------------------------------------------------------------*/