d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
a3e3508a66
freebsd-skq/sys/dev/usb/uhci.c
wpaul 781c6f4086 Fix one bug and make one minor enhancement: 
- In uhci_intr() check to see if sc->sc_bus.bdev is NULL, and if it is,
  ack any pending interrupts and disable them, then return. It is possible
  for interrupts to be delivered the moment a handler is set up at attach
  time in uhci_pci.c, particularly when attempting to kldload the usb.ko
  module after the system is already up. However the driver isn't ready
  to field interrupts at that time and certain pointers in the softc
  struct aren't initialized yet, and we invariably end up falling off
  the end of one of them. The effect is that kldloading the usb module
  will panic the system in uhci_intr(). This added sanity check stops
  this from happening: I can now kldload the usb.ko module without any
  problems and load/attach other USB drivers after it.

  Of course the uhci driver has no detach method, but that's another
  problem.

- In uhci_run(), set the UHCI_CMD_MAXP bit in the command register to
  allow 64-byte packets to be used for full speed bandwidth reclamation.
  Certain high speed devices (in this case the ADMtek USB ethernet
  adapter) require this bit to be set, otherwise babble errors occur
  at the end of large (between 1100 and 1500 byte) transfers. This
  should not affect other devices, although supposedly it is less efficient
  than the 32-byte setting. Unfortunately, this is a per-bus setting,
  not a per-device setting, so we can't just enable it for certain
  devices on the USB bus.
1999-12-23 05:18:58 +00:00

3041 lines
73 KiB
C
Raw Blame History

/* $NetBSD: uhci.c,v 1.67 1999/11/18 23:32:28 augustss Exp $ */
/* $FreeBSD$ */
/*
* Copyright (c) 1998 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Lennart Augustsson (augustss@carlstedt.se) at
* Carlstedt Research & Technology.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* USB Universal Host Controller driver.
* Handles e.g. PIIX3 and PIIX4.
*
* Data sheets: ftp://download.intel.com/design/intarch/datashts/29055002.pdf
* ftp://download.intel.com/design/intarch/datashts/29056201.pdf
* UHCI spec: http://www.intel.com/design/usb/uhci11d.pdf
* USB spec: http://www.usb.org/developers/data/usb11.pdf
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#if defined(__NetBSD__) || defined(__OpenBSD__)
#include <sys/device.h>
#include <sys/select.h>
#elif defined(__FreeBSD__)
#include <sys/module.h>
#include <sys/bus.h>
#include <machine/bus_pio.h>
#if defined(DIAGNOSTIC) && defined(__i386__)
#include <machine/cpu.h>
#endif
#endif
#include <sys/proc.h>
#include <sys/queue.h>
#include <machine/bus.h>
#include <machine/endian.h>
#include <dev/usb/usb.h>
#include <dev/usb/usbdi.h>
#include <dev/usb/usbdivar.h>
#include <dev/usb/usb_mem.h>
#include <dev/usb/usb_quirks.h>
#include <dev/usb/uhcireg.h>
#include <dev/usb/uhcivar.h>
#if defined(__FreeBSD__)
#include <machine/clock.h>
#define delay(d) DELAY(d)
#endif
#define MS_TO_TICKS(ms) ((ms) * hz / 1000)
#if defined(__OpenBSD__)
struct cfdriver uhci_cd = {
NULL, "uhci", DV_DULL
};
#endif
#ifdef UHCI_DEBUG
#define DPRINTF(x) if (uhcidebug) printf x
#define DPRINTFN(n,x) if (uhcidebug>(n)) printf x
int uhcidebug = 0;
#else
#define DPRINTF(x)
#define DPRINTFN(n,x)
#endif
/*
* The UHCI controller is little endian, so on big endian machines
* the data strored in memory needs to be swapped.
*/
#if BYTE_ORDER == BIG_ENDIAN
#define LE(x) (bswap32(x))
#else
#define LE(x) (x)
#endif
struct uhci_pipe {
struct usbd_pipe pipe;
uhci_intr_info_t *iinfo;
int nexttoggle;
/* Info needed for different pipe kinds. */
union {
/* Control pipe */
struct {
uhci_soft_qh_t *sqh;
usb_dma_t reqdma;
uhci_soft_td_t *setup, *stat;
u_int length;
} ctl;
/* Interrupt pipe */
struct {
int npoll;
uhci_soft_qh_t **qhs;
} intr;
/* Bulk pipe */
struct {
uhci_soft_qh_t *sqh;
u_int length;
int isread;
} bulk;
/* Iso pipe */
struct iso {
uhci_soft_td_t **stds;
int next, inuse;
} iso;
} u;
};
/*
* The uhci_intr_info free list can be global since they contain
* no dma specific data. The other free lists do.
*/
LIST_HEAD(, uhci_intr_info) uhci_ii_free;
static void uhci_busreset __P((uhci_softc_t *));
#if defined(__NetBSD__) || defined(__OpenBSD__)
static void uhci_power __P((int, void *));
#endif
static usbd_status uhci_run __P((uhci_softc_t *, int run));
static uhci_soft_td_t *uhci_alloc_std __P((uhci_softc_t *));
static void uhci_free_std __P((uhci_softc_t *, uhci_soft_td_t *));
static uhci_soft_qh_t *uhci_alloc_sqh __P((uhci_softc_t *));
static void uhci_free_sqh __P((uhci_softc_t *, uhci_soft_qh_t *));
static uhci_intr_info_t *uhci_alloc_intr_info __P((uhci_softc_t *));
static void uhci_free_intr_info __P((uhci_intr_info_t *ii));
#if 0
static void uhci_enter_ctl_q __P((uhci_softc_t *, uhci_soft_qh_t *,
uhci_intr_info_t *));
static void uhci_exit_ctl_q __P((uhci_softc_t *, uhci_soft_qh_t *));
#endif
static void uhci_free_std_chain __P((uhci_softc_t *,
uhci_soft_td_t *, uhci_soft_td_t *));
static usbd_status uhci_alloc_std_chain __P((struct uhci_pipe *,
uhci_softc_t *, int, int, int, usb_dma_t *,
uhci_soft_td_t **, uhci_soft_td_t **));
static void uhci_timo __P((void *));
static void uhci_waitintr __P((uhci_softc_t *,
usbd_xfer_handle));
static void uhci_check_intr __P((uhci_softc_t *,
uhci_intr_info_t *));
static void uhci_idone __P((uhci_intr_info_t *));
static void uhci_abort_xfer __P((usbd_xfer_handle,
usbd_status status));
static void uhci_abort_xfer_end __P((void *v));
static void uhci_timeout __P((void *));
static void uhci_lock_frames __P((uhci_softc_t *));
static void uhci_unlock_frames __P((uhci_softc_t *));
static void uhci_add_ctrl __P((uhci_softc_t *, uhci_soft_qh_t *));
static void uhci_add_bulk __P((uhci_softc_t *, uhci_soft_qh_t *));
static void uhci_remove_ctrl __P((uhci_softc_t *,uhci_soft_qh_t *));
static void uhci_remove_bulk __P((uhci_softc_t *,uhci_soft_qh_t *));
static int uhci_str __P((usb_string_descriptor_t *, int, char *));
static usbd_status uhci_setup_isoc __P((usbd_pipe_handle pipe));
static void uhci_device_isoc_enter __P((usbd_xfer_handle));
static usbd_status uhci_allocm __P((struct usbd_bus *, usb_dma_t *,
u_int32_t));
static void uhci_freem __P((struct usbd_bus *, usb_dma_t *));
static usbd_status uhci_device_ctrl_transfer __P((usbd_xfer_handle));
static usbd_status uhci_device_ctrl_start __P((usbd_xfer_handle));
static void uhci_device_ctrl_abort __P((usbd_xfer_handle));
static void uhci_device_ctrl_close __P((usbd_pipe_handle));
static void uhci_device_ctrl_done __P((usbd_xfer_handle));
static usbd_status uhci_device_intr_transfer __P((usbd_xfer_handle));
static usbd_status uhci_device_intr_start __P((usbd_xfer_handle));
static void uhci_device_intr_abort __P((usbd_xfer_handle));
static void uhci_device_intr_close __P((usbd_pipe_handle));
static void uhci_device_intr_done __P((usbd_xfer_handle));
static usbd_status uhci_device_bulk_transfer __P((usbd_xfer_handle));
static usbd_status uhci_device_bulk_start __P((usbd_xfer_handle));
static void uhci_device_bulk_abort __P((usbd_xfer_handle));
static void uhci_device_bulk_close __P((usbd_pipe_handle));
static void uhci_device_bulk_done __P((usbd_xfer_handle));
static usbd_status uhci_device_isoc_transfer __P((usbd_xfer_handle));
static usbd_status uhci_device_isoc_start __P((usbd_xfer_handle));
static void uhci_device_isoc_abort __P((usbd_xfer_handle));
static void uhci_device_isoc_close __P((usbd_pipe_handle));
static void uhci_device_isoc_done __P((usbd_xfer_handle));
static usbd_status uhci_root_ctrl_transfer __P((usbd_xfer_handle));
static usbd_status uhci_root_ctrl_start __P((usbd_xfer_handle));
static void uhci_root_ctrl_abort __P((usbd_xfer_handle));
static void uhci_root_ctrl_close __P((usbd_pipe_handle));
static usbd_status uhci_root_intr_transfer __P((usbd_xfer_handle));
static usbd_status uhci_root_intr_start __P((usbd_xfer_handle));
static void uhci_root_intr_abort __P((usbd_xfer_handle));
static void uhci_root_intr_close __P((usbd_pipe_handle));
static void uhci_root_intr_done __P((usbd_xfer_handle));
static usbd_status uhci_open __P((usbd_pipe_handle));
static void uhci_poll __P((struct usbd_bus *));
static usbd_status uhci_device_request __P((usbd_xfer_handle xfer));
static void uhci_add_intr __P((uhci_softc_t *, int,
uhci_soft_qh_t *));
static void uhci_remove_intr __P((uhci_softc_t *, int,
uhci_soft_qh_t *));
static usbd_status uhci_device_setintr __P((uhci_softc_t *sc,
struct uhci_pipe *pipe, int ival));
static void uhci_device_clear_toggle __P((usbd_pipe_handle pipe));
static void uhci_noop __P((usbd_pipe_handle pipe));
#ifdef UHCI_DEBUG
static void uhci_dumpregs __P((uhci_softc_t *));
static void uhci_dump_qhs __P((uhci_soft_qh_t *));
static void uhci_dump_qh __P((uhci_soft_qh_t *));
static void uhci_dump_tds __P((uhci_soft_td_t *));
static void uhci_dump_td __P((uhci_soft_td_t *));
#endif
#define UWRITE2(sc, r, x) bus_space_write_2((sc)->iot, (sc)->ioh, (r), (x))
#define UWRITE4(sc, r, x) bus_space_write_4((sc)->iot, (sc)->ioh, (r), (x))
#define UREAD1(sc, r) bus_space_read_1((sc)->iot, (sc)->ioh, (r))
#define UREAD2(sc, r) bus_space_read_2((sc)->iot, (sc)->ioh, (r))
#define UREAD4(sc, r) bus_space_read_4((sc)->iot, (sc)->ioh, (r))
#define UHCICMD(sc, cmd) UWRITE2(sc, UHCI_CMD, cmd)
#define UHCISTS(sc) UREAD2(sc, UHCI_STS)
#define UHCI_RESET_TIMEOUT 100 /* reset timeout */
#define UHCI_CURFRAME(sc) (UREAD2(sc, UHCI_FRNUM) & UHCI_FRNUM_MASK)
#define UHCI_INTR_ENDPT 1
struct usbd_bus_methods uhci_bus_methods = {
uhci_open,
uhci_poll,
uhci_allocm,
uhci_freem,
};
struct usbd_pipe_methods uhci_root_ctrl_methods = {
uhci_root_ctrl_transfer,
uhci_root_ctrl_start,
uhci_root_ctrl_abort,
uhci_root_ctrl_close,
uhci_noop,
0,
};
struct usbd_pipe_methods uhci_root_intr_methods = {
uhci_root_intr_transfer,
uhci_root_intr_start,
uhci_root_intr_abort,
uhci_root_intr_close,
uhci_noop,
uhci_root_intr_done,
};
struct usbd_pipe_methods uhci_device_ctrl_methods = {
uhci_device_ctrl_transfer,
uhci_device_ctrl_start,
uhci_device_ctrl_abort,
uhci_device_ctrl_close,
uhci_noop,
uhci_device_ctrl_done,
};
struct usbd_pipe_methods uhci_device_intr_methods = {
uhci_device_intr_transfer,
uhci_device_intr_start,
uhci_device_intr_abort,
uhci_device_intr_close,
uhci_device_clear_toggle,
uhci_device_intr_done,
};
struct usbd_pipe_methods uhci_device_bulk_methods = {
uhci_device_bulk_transfer,
uhci_device_bulk_start,
uhci_device_bulk_abort,
uhci_device_bulk_close,
uhci_device_clear_toggle,
uhci_device_bulk_done,
};
struct usbd_pipe_methods uhci_device_isoc_methods = {
uhci_device_isoc_transfer,
uhci_device_isoc_start,
uhci_device_isoc_abort,
uhci_device_isoc_close,
uhci_noop,
uhci_device_isoc_done,
};
void
uhci_busreset(sc)
uhci_softc_t *sc;
{
UHCICMD(sc, UHCI_CMD_GRESET); /* global reset */
usb_delay_ms(&sc->sc_bus, USB_BUS_RESET_DELAY); /* wait a little */
UHCICMD(sc, 0); /* do nothing */
}
usbd_status
uhci_init(sc)
uhci_softc_t *sc;
{
usbd_status err;
int i, j;
uhci_soft_qh_t *csqh, *bsqh, *sqh;
uhci_soft_td_t *std;
DPRINTFN(1,("uhci_init: start\n"));
#ifdef UHCI_DEBUG
if (uhcidebug > 2)
uhci_dumpregs(sc);
#endif
uhci_run(sc, 0); /* stop the controller */
UWRITE2(sc, UHCI_INTR, 0); /* disable interrupts */
uhci_busreset(sc);
/* Allocate and initialize real frame array. */
err = usb_allocmem(&sc->sc_bus,
UHCI_FRAMELIST_COUNT * sizeof(uhci_physaddr_t),
UHCI_FRAMELIST_ALIGN, &sc->sc_dma);
if (err)
return (err);
sc->sc_pframes = KERNADDR(&sc->sc_dma);
UWRITE2(sc, UHCI_FRNUM, 0); /* set frame number to 0 */
UWRITE4(sc, UHCI_FLBASEADDR, DMAADDR(&sc->sc_dma)); /* set frame list*/
/* Allocate the dummy QH where bulk traffic will be queued. */
bsqh = uhci_alloc_sqh(sc);
if (bsqh == NULL)
return (USBD_NOMEM);
bsqh->qh.qh_hlink = LE(UHCI_PTR_T); /* end of QH chain */
bsqh->qh.qh_elink = LE(UHCI_PTR_T);
sc->sc_bulk_start = sc->sc_bulk_end = bsqh;
/* Allocate the dummy QH where control traffic will be queued. */
csqh = uhci_alloc_sqh(sc);
if (csqh == NULL)
return (USBD_NOMEM);
csqh->hlink = bsqh;
csqh->qh.qh_hlink = LE(bsqh->physaddr | UHCI_PTR_Q);
csqh->qh.qh_elink = LE(UHCI_PTR_T);
sc->sc_ctl_start = sc->sc_ctl_end = csqh;
/*
* Make all (virtual) frame list pointers point to the interrupt
* queue heads and the interrupt queue heads at the control
* queue head and point the physical frame list to the virtual.
*/
for(i = 0; i < UHCI_VFRAMELIST_COUNT; i++) {
std = uhci_alloc_std(sc);
sqh = uhci_alloc_sqh(sc);
if (std == NULL || sqh == NULL)
return (USBD_NOMEM);
std->link.sqh = sqh;
std->td.td_link = LE(sqh->physaddr | UHCI_PTR_Q);
std->td.td_status = LE(UHCI_TD_IOS); /* iso, inactive */
std->td.td_token = LE(0);
std->td.td_buffer = LE(0);
sqh->hlink = csqh;
sqh->qh.qh_hlink = LE(csqh->physaddr | UHCI_PTR_Q);
sqh->elink = 0;
sqh->qh.qh_elink = LE(UHCI_PTR_T);
sc->sc_vframes[i].htd = std;
sc->sc_vframes[i].etd = std;
sc->sc_vframes[i].hqh = sqh;
sc->sc_vframes[i].eqh = sqh;
for (j = i;
j < UHCI_FRAMELIST_COUNT;
j += UHCI_VFRAMELIST_COUNT)
sc->sc_pframes[j] = LE(std->physaddr);
}
LIST_INIT(&sc->sc_intrhead);
/* Set up the bus struct. */
sc->sc_bus.methods = &uhci_bus_methods;
sc->sc_bus.pipe_size = sizeof(struct uhci_pipe);
sc->sc_suspend = PWR_RESUME;
sc->sc_powerhook = powerhook_establish(uhci_power, sc);
DPRINTFN(1,("uhci_init: enabling\n"));
UWRITE2(sc, UHCI_INTR, UHCI_INTR_TOCRCIE | UHCI_INTR_RIE |
UHCI_INTR_IOCE | UHCI_INTR_SPIE); /* enable interrupts */
return (uhci_run(sc, 1)); /* and here we go... */
}
#if defined(__NetBSD__) || defined(__OpenBSD__)
int
uhci_activate(self, act)
device_ptr_t self;
enum devact act;
{
struct uhci_softc *sc = (struct uhci_softc *)self;
int rv = 0;
switch (act) {
case DVACT_ACTIVATE:
return (EOPNOTSUPP);
break;
case DVACT_DEACTIVATE:
if (sc->sc_child != NULL)
rv = config_deactivate(sc->sc_child);
break;
}
return (rv);
}
int
uhci_detach(sc, flags)
struct uhci_softc *sc;
int flags;
{
int rv = 0;
if (sc->sc_child != NULL)
rv = config_detach(sc->sc_child, flags);
if (rv != 0)
return (rv);
powerhook_disestablish(sc->sc_powerhook);
/* free data structures XXX */
return (rv);
}
#endif
usbd_status
uhci_allocm(bus, dma, size)
struct usbd_bus *bus;
usb_dma_t *dma;
u_int32_t size;
{
return (usb_allocmem(&((struct uhci_softc *)bus)->sc_bus, size, 0,
dma));
}
void
uhci_freem(bus, dma)
struct usbd_bus *bus;
usb_dma_t *dma;
{
usb_freemem(&((struct uhci_softc *)bus)->sc_bus, dma);
}
#if defined(__NetBSD__)
/*
* Handle suspend/resume.
*
* We need to switch to polling mode here, because this routine is
* called from an intterupt context. This is all right since we
* are almost suspended anyway.
*/
void
uhci_power(why, v)
int why;
void *v;
{
uhci_softc_t *sc = v;
int cmd;
int s;
s = splusb();
cmd = UREAD2(sc, UHCI_CMD);
DPRINTF(("uhci_power: sc=%p, why=%d (was %d), cmd=0x%x\n",
sc, why, sc->sc_suspend, cmd));
if (why != PWR_RESUME) {
#ifdef UHCI_DEBUG
if (uhcidebug > 2)
uhci_dumpregs(sc);
#endif
if (sc->sc_has_timo)
usb_untimeout(uhci_timo, sc->sc_has_timo,
sc->sc_has_timo->timo_handle);
sc->sc_bus.use_polling++;
uhci_run(sc, 0); /* stop the controller */
UHCICMD(sc, cmd | UHCI_CMD_EGSM); /* enter global suspend */
usb_delay_ms(&sc->sc_bus, USB_RESUME_WAIT);
sc->sc_suspend = why;
sc->sc_bus.use_polling--;
DPRINTF(("uhci_power: cmd=0x%x\n", UREAD2(sc, UHCI_CMD)));
} else {
/*
* XXX We should really do much more here in case the
* controller registers have been lost and BIOS has
* not restored them.
*/
#ifdef DIAGNOSTIC
if (sc->sc_suspend == PWR_RESUME)
printf("uhci_power: weird, resume without suspend.\n");
#endif
sc->sc_bus.use_polling++;
sc->sc_suspend = why;
if (cmd & UHCI_CMD_RS)
uhci_run(sc, 0); /* in case BIOS has started it */
UHCICMD(sc, cmd | UHCI_CMD_FGR); /* force global resume */
usb_delay_ms(&sc->sc_bus, USB_RESUME_DELAY);
UHCICMD(sc, cmd & ~UHCI_CMD_EGSM); /* back to normal */
UWRITE2(sc, UHCI_INTR, UHCI_INTR_TOCRCIE | UHCI_INTR_RIE |
UHCI_INTR_IOCE | UHCI_INTR_SPIE); /* re-enable intrs */
uhci_run(sc, 1); /* and start traffic again */
usb_delay_ms(&sc->sc_bus, USB_RESUME_RECOVERY);
sc->sc_bus.use_polling--;
if (sc->sc_has_timo)
usb_timeout(uhci_timo, sc->sc_has_timo,
sc->sc_ival, sc->sc_has_timo->timo_handle);
#ifdef UHCI_DEBUG
if (uhcidebug > 2)
uhci_dumpregs(sc);
#endif
}
splx(s);
}
#endif
#ifdef UHCI_DEBUG
static void
uhci_dumpregs(sc)
uhci_softc_t *sc;
{
DPRINTFN(-1,("%s regs: cmd=%04x, sts=%04x, intr=%04x, frnum=%04x, "
"flbase=%08x, sof=%04x, portsc1=%04x, portsc2=%04x\n",
USBDEVNAME(sc->sc_bus.bdev),
UREAD2(sc, UHCI_CMD),
UREAD2(sc, UHCI_STS),
UREAD2(sc, UHCI_INTR),
UREAD2(sc, UHCI_FRNUM),
UREAD4(sc, UHCI_FLBASEADDR),
UREAD1(sc, UHCI_SOF),
UREAD2(sc, UHCI_PORTSC1),
UREAD2(sc, UHCI_PORTSC2)));
}
void
uhci_dump_td(p)
uhci_soft_td_t *p;
{
DPRINTFN(-1,("TD(%p) at %08lx = link=0x%08lx status=0x%08lx "
"token=0x%08lx buffer=0x%08lx\n",
p, (long)p->physaddr,
(long)LE(p->td.td_link),
(long)LE(p->td.td_status),
(long)LE(p->td.td_token),
(long)LE(p->td.td_buffer)));
DPRINTFN(-1,(" %b %b,errcnt=%d,actlen=%d pid=%02x,addr=%d,endpt=%d,"
"D=%d,maxlen=%d\n",
(int)LE(p->td.td_link),
"\20\1T\2Q\3VF",
(int)LE(p->td.td_status),
"\20\22BITSTUFF\23CRCTO\24NAK\25BABBLE\26DBUFFER\27"
"STALLED\30ACTIVE\31IOC\32ISO\33LS\36SPD",
UHCI_TD_GET_ERRCNT(LE(p->td.td_status)),
UHCI_TD_GET_ACTLEN(LE(p->td.td_status)),
UHCI_TD_GET_PID(LE(p->td.td_token)),
UHCI_TD_GET_DEVADDR(LE(p->td.td_token)),
UHCI_TD_GET_ENDPT(LE(p->td.td_token)),
UHCI_TD_GET_DT(LE(p->td.td_token)),
UHCI_TD_GET_MAXLEN(LE(p->td.td_token))));
}
void
uhci_dump_qh(sqh)
uhci_soft_qh_t *sqh;
{
DPRINTFN(-1,("QH(%p) at %08x: hlink=%08x elink=%08x\n", sqh,
(int)sqh->physaddr, LE(sqh->qh.qh_hlink), LE(sqh->qh.qh_elink)));
}
#if 0
void
uhci_dump()
{
uhci_softc_t *sc = uhci;
uhci_dumpregs(sc);
printf("intrs=%d\n", sc->sc_bus.no_intrs);
printf("framelist[i].link = %08x\n", sc->sc_framelist[0].link);
uhci_dump_qh(sc->sc_ctl_start->qh.hlink);
}
#endif
void
uhci_dump_qhs(sqh)
uhci_soft_qh_t *sqh;
{
uhci_dump_qh(sqh);
/* uhci_dump_qhs displays all the QHs and TDs from the given QH onwards
* Traverses sideways first, then down.
*
* QH1
* QH2
* No QH
* TD2.1
* TD2.2
* TD1.1
* etc.
*
* TD2.x being the TDs queued at QH2 and QH1 being referenced from QH1.
*/
if (sqh->hlink != NULL && !(sqh->qh.qh_hlink & UHCI_PTR_T))
uhci_dump_qhs(sqh->hlink);
else
DPRINTF(("No QH\n"));
if (sqh->elink != NULL && !(sqh->qh.qh_elink & UHCI_PTR_T))
uhci_dump_tds(sqh->elink);
else
DPRINTF(("No TD\n"));
}
void
uhci_dump_tds(std)
uhci_soft_td_t *std;
{
uhci_soft_td_t *td;
for(td = std; td != NULL; td = td->link.std) {
uhci_dump_td(td);
/* Check whether the link pointer in this TD marks
* the link pointer as end of queue. This avoids
* printing the free list in case the queue/TD has
* already been moved there (seatbelt).
*/
if (td->td.td_link & UHCI_PTR_T ||
td->td.td_link == 0)
break;
}
}
#endif
/*
* This routine is executed periodically and simulates interrupts
* from the root controller interrupt pipe for port status change.
*/
void
uhci_timo(addr)
void *addr;
{
usbd_xfer_handle xfer = addr;
usbd_pipe_handle pipe = xfer->pipe;
uhci_softc_t *sc = (uhci_softc_t *)pipe->device->bus;
int s;
u_char *p;
DPRINTFN(20, ("uhci_timo\n"));
usb_timeout(uhci_timo, xfer, sc->sc_ival, xfer->timo_handle);
p = KERNADDR(&xfer->dmabuf);
p[0] = 0;
if (UREAD2(sc, UHCI_PORTSC1) & (UHCI_PORTSC_CSC|UHCI_PORTSC_OCIC))
p[0] |= 1<<1;
if (UREAD2(sc, UHCI_PORTSC2) & (UHCI_PORTSC_CSC|UHCI_PORTSC_OCIC))
p[0] |= 1<<2;
if (p[0] == 0)
/* No change, try again in a while */
return;
xfer->actlen = 1;
xfer->status = USBD_NORMAL_COMPLETION;
s = splusb();
xfer->hcpriv = 0;
xfer->device->bus->intr_context++;
usb_transfer_complete(xfer);
xfer->device->bus->intr_context--;
splx(s);
}
void
uhci_root_intr_done(xfer)
usbd_xfer_handle xfer;
{
}
void
uhci_lock_frames(sc)
uhci_softc_t *sc;
{
int s = splusb();
while (sc->sc_vflock) {
sc->sc_vflock |= UHCI_WANT_LOCK;
tsleep(&sc->sc_vflock, PRIBIO, "uhcqhl", 0);
}
sc->sc_vflock = UHCI_HAS_LOCK;
splx(s);
}
void
uhci_unlock_frames(sc)
uhci_softc_t *sc;
{
int s = splusb();
sc->sc_vflock &= ~UHCI_HAS_LOCK;
if (sc->sc_vflock & UHCI_WANT_LOCK)
wakeup(&sc->sc_vflock);
splx(s);
}
/*
* Allocate an interrupt information struct. A free list is kept
* for fast allocation.
*/
uhci_intr_info_t *
uhci_alloc_intr_info(sc)
uhci_softc_t *sc;
{
uhci_intr_info_t *ii;
ii = LIST_FIRST(&uhci_ii_free);
if (ii)
LIST_REMOVE(ii, list);
else {
ii = malloc(sizeof(uhci_intr_info_t), M_USBHC, M_NOWAIT);
}
ii->sc = sc;
#if defined(__FreeBSD__)
callout_handle_init(&ii->timeout_handle);
#endif
return ii;
}
void
uhci_free_intr_info(ii)
uhci_intr_info_t *ii;
{
LIST_INSERT_HEAD(&uhci_ii_free, ii, list); /* and put on free list */
}
/* Add control QH, called at splusb(). */
void
uhci_add_ctrl(sc, sqh)
uhci_softc_t *sc;
uhci_soft_qh_t *sqh;
{
uhci_soft_qh_t *eqh;
SPLUSBCHECK;
DPRINTFN(10, ("uhci_add_ctrl: sqh=%p\n", sqh));
eqh = sc->sc_ctl_end;
sqh->hlink = eqh->hlink;
sqh->qh.qh_hlink = eqh->qh.qh_hlink;
eqh->hlink = sqh;
eqh->qh.qh_hlink = LE(sqh->physaddr | UHCI_PTR_Q);
sc->sc_ctl_end = sqh;
}
/* Remove control QH, called at splusb(). */
void
uhci_remove_ctrl(sc, sqh)
uhci_softc_t *sc;
uhci_soft_qh_t *sqh;
{
uhci_soft_qh_t *pqh;
SPLUSBCHECK;
DPRINTFN(10, ("uhci_remove_ctrl: sqh=%p\n", sqh));
for (pqh = sc->sc_ctl_start; pqh->hlink != sqh; pqh=pqh->hlink)
#if defined(DIAGNOSTIC) || defined(UHCI_DEBUG)
if (LE(pqh->qh.qh_hlink) & UHCI_PTR_T) {
printf("uhci_remove_ctrl: QH not found\n");
return;
}
#else
;
#endif
pqh->hlink = sqh->hlink;
pqh->qh.qh_hlink = sqh->qh.qh_hlink;
if (sc->sc_ctl_end == sqh)
sc->sc_ctl_end = pqh;
}
/* Add bulk QH, called at splusb(). */
void
uhci_add_bulk(sc, sqh)
uhci_softc_t *sc;
uhci_soft_qh_t *sqh;
{
uhci_soft_qh_t *eqh;
SPLUSBCHECK;
DPRINTFN(10, ("uhci_add_bulk: sqh=%p\n", sqh));
eqh = sc->sc_bulk_end;
sqh->hlink = eqh->hlink;
sqh->qh.qh_hlink = eqh->qh.qh_hlink;
eqh->hlink = sqh;
eqh->qh.qh_hlink = LE(sqh->physaddr | UHCI_PTR_Q);
sc->sc_bulk_end = sqh;
}
/* Remove bulk QH, called at splusb(). */
void
uhci_remove_bulk(sc, sqh)
uhci_softc_t *sc;
uhci_soft_qh_t *sqh;
{
uhci_soft_qh_t *pqh;
SPLUSBCHECK;
DPRINTFN(10, ("uhci_remove_bulk: sqh=%p\n", sqh));
for (pqh = sc->sc_bulk_start; pqh->hlink != sqh; pqh = pqh->hlink)
#if defined(DIAGNOSTIC) || defined(UHCI_DEBUG)
if (LE(pqh->qh.qh_hlink) & UHCI_PTR_T) {
printf("uhci_remove_bulk: QH not found\n");
return;
}
#else
;
#endif
pqh->hlink = sqh->hlink;
pqh->qh.qh_hlink = sqh->qh.qh_hlink;
if (sc->sc_bulk_end == sqh)
sc->sc_bulk_end = pqh;
}
int
uhci_intr(arg)
void *arg;
{
uhci_softc_t *sc = arg;
int status;
int ack;
uhci_intr_info_t *ii;
/*
* It can happen that an interrupt will be delivered to
* us before the device has been fully attached and the
* softc struct has been configured. Usually this happens
* when kldloading the USB support as a module after the
* system has been booted. If we detect this condition,
* we need to squelch the unwanted interrupts until we're
* ready for them.
*/
if (sc->sc_bus.bdev == NULL) {
UWRITE2(sc, UHCI_STS, 0xFFFF); /* ack pending interrupts */
uhci_run(sc, 0); /* stop the controller */
UWRITE2(sc, UHCI_INTR, 0); /* disable interrupts */
return(0);
}
#ifdef UHCI_DEBUG
if (uhcidebug > 15) {
DPRINTF(("%s: uhci_intr\n", USBDEVNAME(sc->sc_bus.bdev)));
uhci_dumpregs(sc);
}
#endif
status = UREAD2(sc, UHCI_STS);
if (status == 0) /* The interrupt was not for us. */
return (0);
#if defined(DIAGNOSTIC) && defined(__NetBSD__)
if (sc->sc_suspend != PWR_RESUME)
printf("uhci_intr: suspended sts=0x%x\n", status);
#endif
ack = 0;
if (status & UHCI_STS_USBINT)
ack |= UHCI_STS_USBINT;
if (status & UHCI_STS_USBEI)
ack |= UHCI_STS_USBEI;
if (status & UHCI_STS_RD) {
ack |= UHCI_STS_RD;
printf("%s: resume detect\n", USBDEVNAME(sc->sc_bus.bdev));
}
if (status & UHCI_STS_HSE) {
ack |= UHCI_STS_HSE;
printf("%s: host controller process error\n",
USBDEVNAME(sc->sc_bus.bdev));
}
if (status & UHCI_STS_HCPE) {
ack |= UHCI_STS_HCPE;
printf("%s: host system error\n", USBDEVNAME(sc->sc_bus.bdev));
}
if (status & UHCI_STS_HCH) {
/* no acknowledge needed */
printf("%s: host controller halted\n",
USBDEVNAME(sc->sc_bus.bdev));
}
if (ack) /* acknowledge the ints */
UWRITE2(sc, UHCI_STS, ack);
else /* nothing to acknowledge */
return (0);
sc->sc_bus.intr_context++;
sc->sc_bus.no_intrs++;
/*
* Interrupts on UHCI really suck. When the host controller
* interrupts because a transfer is completed there is no
* way of knowing which transfer it was. You can scan down
* the TDs and QHs of the previous frame to limit the search,
* but that assumes that the interrupt was not delayed by more
* than 1 ms, which may not always be true (e.g. after debug
* output on a slow console).
* We scan all interrupt descriptors to see if any have
* completed.
*/
for (ii = LIST_FIRST(&sc->sc_intrhead); ii; ii = LIST_NEXT(ii, list))
uhci_check_intr(sc, ii);
DPRINTFN(10, ("%s: uhci_intr: exit\n", USBDEVNAME(sc->sc_bus.bdev)));
sc->sc_bus.intr_context--;
return (1);
}
/* Check for an interrupt. */
void
uhci_check_intr(sc, ii)
uhci_softc_t *sc;
uhci_intr_info_t *ii;
{
uhci_soft_td_t *std, *lstd;
u_int32_t status;
DPRINTFN(15, ("uhci_check_intr: ii=%p\n", ii));
#ifdef DIAGNOSTIC
if (ii == NULL) {
printf("uhci_check_intr: no ii? %p\n", ii);
return;
}
#endif
if (ii->stdstart == NULL)
return;
lstd = ii->stdend;
#ifdef DIAGNOSTIC
if (lstd == NULL) {
printf("uhci_check_intr: std==0\n");
return;
}
#endif
/*
* If the last TD is still active we need to check whether there
* is a an error somewhere in the middle, or whether there was a
* short packet (SPD and not ACTIVE).
*/
if (LE(lstd->td.td_status) & UHCI_TD_ACTIVE) {
DPRINTFN(15, ("uhci_check_intr: active ii=%p\n", ii));
for (std = ii->stdstart; std != lstd; std = std->link.std) {
status = LE(std->td.td_status);
if ((status & UHCI_TD_STALLED) ||
(status & (UHCI_TD_SPD | UHCI_TD_ACTIVE)) ==
UHCI_TD_SPD)
goto done;
}
DPRINTFN(15, ("uhci_check_intr: ii=%p std=%p still active\n",
ii, ii->stdstart));
return;
}
done:
usb_untimeout(uhci_timeout, ii, ii->timeout_handle);
uhci_idone(ii);
}
/* Called at splusb() */
void
uhci_idone(ii)
uhci_intr_info_t *ii;
{
usbd_xfer_handle xfer = ii->xfer;
struct uhci_pipe *upipe = (struct uhci_pipe *)xfer->pipe;
uhci_soft_td_t *std;
u_int32_t status = 0, nstatus;
int actlen;
#ifdef DIAGNOSTIC
{
int s = splhigh();
if (ii->isdone) {
splx(s);
printf("uhci_idone: ii=%p is done!\n", ii);
return;
}
ii->isdone = 1;
splx(s);
}
#endif
if (xfer->status == USBD_CANCELLED ||
xfer->status == USBD_TIMEOUT) {
DPRINTF(("uhci_idone: aborted xfer=%p\n", xfer));
return;
}
if (xfer->nframes != 0) {
/* Isoc transfer, do things differently. */
uhci_soft_td_t **stds = upipe->u.iso.stds;
int i, n, nframes;
DPRINTFN(5,("uhci_idone: ii=%p isoc ready\n", ii));
nframes = xfer->nframes;
actlen = 0;
n = xfer->hcprivint;
for (i = 0; i < nframes; i++) {
std = stds[n];
#ifdef UHCI_DEBUG
if (uhcidebug > 5) {
DPRINTFN(-1,("uhci_idone: isoc TD %d\n", i));
uhci_dump_td(std);
}
#endif
if (++n >= UHCI_VFRAMELIST_COUNT)
n = 0;
status = LE(std->td.td_status);
actlen += UHCI_TD_GET_ACTLEN(status);
}
upipe->u.iso.inuse -= nframes;
xfer->actlen = actlen;
xfer->status = USBD_NORMAL_COMPLETION;
xfer->hcpriv = ii;
usb_transfer_complete(xfer);
return;
}
#ifdef UHCI_DEBUG
DPRINTFN(10, ("uhci_idone: ii=%p, xfer=%p, pipe=%p ready\n",
ii, xfer, upipe));
if (uhcidebug > 10)
uhci_dump_tds(ii->stdstart);
#endif
/* The transfer is done, compute actual length and status. */
actlen = 0;
for (std = ii->stdstart; std != NULL; std = std->link.std) {
nstatus = LE(std->td.td_status);
if (nstatus & UHCI_TD_ACTIVE)
break;
status = nstatus;
if (UHCI_TD_GET_PID(LE(std->td.td_token)) != UHCI_TD_PID_SETUP)
actlen += UHCI_TD_GET_ACTLEN(status);
}
/* If there are left over TDs we need to update the toggle. */
if (std != NULL)
upipe->nexttoggle = UHCI_TD_GET_DT(LE(std->td.td_token));
status &= UHCI_TD_ERROR;
DPRINTFN(10, ("uhci_check_intr: actlen=%d, status=0x%x\n",
actlen, status));
xfer->actlen = actlen;
if (status != 0) {
DPRINTFN((status&UHCI_TD_STALLED)*10,
("uhci_idone: error, addr=%d, endpt=0x%02x, "
"status 0x%b\n",
xfer->pipe->device->address,
xfer->pipe->endpoint->edesc->bEndpointAddress,
(int)status,
"\20\22BITSTUFF\23CRCTO\24NAK\25BABBLE\26DBUFFER\27"
"STALLED\30ACTIVE"));
if (status == UHCI_TD_STALLED)
xfer->status = USBD_STALLED;
else
xfer->status = USBD_IOERROR; /* more info XXX */
} else {
xfer->status = USBD_NORMAL_COMPLETION;
}
xfer->hcpriv = ii;
usb_transfer_complete(xfer);
}
/*
* Called when a request does not complete.
*/
void
uhci_timeout(addr)
void *addr;
{
uhci_intr_info_t *ii = addr;
DPRINTF(("uhci_timeout: ii=%p\n", ii));
#ifdef UHCI_DEBUG
if (uhcidebug > 10)
uhci_dump_tds(ii->stdstart);
#endif
ii->xfer->device->bus->intr_context++;
uhci_abort_xfer(ii->xfer, USBD_TIMEOUT);
ii->xfer->device->bus->intr_context--;
}
/*
* Wait here until controller claims to have an interrupt.
* Then call uhci_intr and return. Use timeout to avoid waiting
* too long.
* Only used during boot when interrupts are not enabled yet.
*/
void
uhci_waitintr(sc, xfer)
uhci_softc_t *sc;
usbd_xfer_handle xfer;
{
int timo = xfer->timeout;
uhci_intr_info_t *ii;
DPRINTFN(10,("uhci_waitintr: timeout = %dms\n", timo));
xfer->status = USBD_IN_PROGRESS;
for (; timo >= 0; timo--) {
usb_delay_ms(&sc->sc_bus, 1);
DPRINTFN(20,("uhci_waitintr: 0x%04x\n", UREAD2(sc, UHCI_STS)));
if (UREAD2(sc, UHCI_STS) & UHCI_STS_USBINT) {
uhci_intr(sc);
if (xfer->status != USBD_IN_PROGRESS)
return;
}
}
/* Timeout */
DPRINTF(("uhci_waitintr: timeout\n"));
for (ii = LIST_FIRST(&sc->sc_intrhead);
ii != NULL && ii->xfer != xfer;
ii = LIST_NEXT(ii, list))
;
#ifdef DIAGNOSTIC
if (ii == NULL)
panic("uhci_waitintr: lost intr_info\n");
#endif
uhci_idone(ii);
}
void
uhci_poll(bus)
struct usbd_bus *bus;
{
uhci_softc_t *sc = (uhci_softc_t *)bus;
if (UREAD2(sc, UHCI_STS) & UHCI_STS_USBINT)
uhci_intr(sc);
}
#if 0
void
uhci_reset(p)
void *p;
{
uhci_softc_t *sc = p;
int n;
UHCICMD(sc, UHCI_CMD_HCRESET);
/* The reset bit goes low when the controller is done. */
for (n = 0; n < UHCI_RESET_TIMEOUT &&
(UREAD2(sc, UHCI_CMD) & UHCI_CMD_HCRESET); n++)
delay(100);
if (n >= UHCI_RESET_TIMEOUT)
printf("%s: controller did not reset\n",
USBDEVNAME(sc->sc_bus.bdev));
}
#endif
usbd_status
uhci_run(sc, run)
uhci_softc_t *sc;
int run;
{
int s, n, running;
run = run != 0;
s = splusb();
DPRINTF(("uhci_run: setting run=%d\n", run));
/*
* When activating the controller, set the MAXP bit.
* Certain high speed devices such as network adapters
* require this in order to avoid babble errors that
* can cause an endpoint stall.
*/
UHCICMD(sc, run ? UHCI_CMD_RS|UHCI_CMD_MAXP : 0);
for(n = 0; n < 10; n++) {
running = !(UREAD2(sc, UHCI_STS) & UHCI_STS_HCH);
/* return when we've entered the state we want */
if (run == running) {
splx(s);
DPRINTF(("uhci_run: done cmd=0x%x sts=0x%x\n",
UREAD2(sc, UHCI_CMD), UREAD2(sc, UHCI_STS)));
return (USBD_NORMAL_COMPLETION);
}
usb_delay_ms(&sc->sc_bus, 1);
}
splx(s);
printf("%s: cannot %s\n", USBDEVNAME(sc->sc_bus.bdev),
run ? "start" : "stop");
return (USBD_IOERROR);
}
/*
* Memory management routines.
* uhci_alloc_std allocates TDs
* uhci_alloc_sqh allocates QHs
* These two routines do their own free list management,
* partly for speed, partly because allocating DMAable memory
* has page size granularaity so much memory would be wasted if
* only one TD/QH (32 bytes) was placed in each allocated chunk.
*/
uhci_soft_td_t *
uhci_alloc_std(sc)
uhci_softc_t *sc;
{
uhci_soft_td_t *std;
usbd_status err;
int i, offs;
usb_dma_t dma;
if (sc->sc_freetds == NULL) {
DPRINTFN(2,("uhci_alloc_std: allocating chunk\n"));
err = usb_allocmem(&sc->sc_bus, UHCI_STD_SIZE * UHCI_STD_CHUNK,
UHCI_TD_ALIGN, &dma);
if (err)
return (0);
for(i = 0; i < UHCI_STD_CHUNK; i++) {
offs = i * UHCI_STD_SIZE;
std = (uhci_soft_td_t *)((char *)KERNADDR(&dma) +offs);
std->physaddr = DMAADDR(&dma) + offs;
std->link.std = sc->sc_freetds;
sc->sc_freetds = std;
}
}
std = sc->sc_freetds;
sc->sc_freetds = std->link.std;
memset(&std->td, 0, sizeof(uhci_td_t));
return std;
}
void
uhci_free_std(sc, std)
uhci_softc_t *sc;
uhci_soft_td_t *std;
{
#ifdef DIAGNOSTIC
#define TD_IS_FREE 0x12345678
if (std->td.td_token == LE(TD_IS_FREE)) {
printf("uhci_free_std: freeing free TD %p\n", std);
return;
}
std->td.td_token = LE(TD_IS_FREE);
#endif
std->link.std = sc->sc_freetds;
sc->sc_freetds = std;
}
uhci_soft_qh_t *
uhci_alloc_sqh(sc)
uhci_softc_t *sc;
{
uhci_soft_qh_t *sqh;
usbd_status err;
int i, offs;
usb_dma_t dma;
if (sc->sc_freeqhs == NULL) {
DPRINTFN(2, ("uhci_alloc_sqh: allocating chunk\n"));
err = usb_allocmem(&sc->sc_bus, UHCI_SQH_SIZE * UHCI_SQH_CHUNK,
UHCI_QH_ALIGN, &dma);
if (err)
return (0);
for(i = 0; i < UHCI_SQH_CHUNK; i++) {
offs = i * UHCI_SQH_SIZE;
sqh = (uhci_soft_qh_t *)((char *)KERNADDR(&dma) +offs);
sqh->physaddr = DMAADDR(&dma) + offs;
sqh->hlink = sc->sc_freeqhs;
sc->sc_freeqhs = sqh;
}
}
sqh = sc->sc_freeqhs;
sc->sc_freeqhs = sqh->hlink;
memset(&sqh->qh, 0, sizeof(uhci_qh_t));
return (sqh);
}
void
uhci_free_sqh(sc, sqh)
uhci_softc_t *sc;
uhci_soft_qh_t *sqh;
{
sqh->hlink = sc->sc_freeqhs;
sc->sc_freeqhs = sqh;
}
#if 0
/*
* Enter a list of transfers onto a control queue.
* Called at splusb()
*/
void
uhci_enter_ctl_q(sc, sqh, ii)
uhci_softc_t *sc;
uhci_soft_qh_t *sqh;
uhci_intr_info_t *ii;
{
DPRINTFN(5, ("uhci_enter_ctl_q: sqh=%p\n", sqh));
}
#endif
void
uhci_free_std_chain(sc, std, stdend)
uhci_softc_t *sc;
uhci_soft_td_t *std;
uhci_soft_td_t *stdend;
{
uhci_soft_td_t *p;
for (; std != stdend; std = p) {
p = std->link.std;
uhci_free_std(sc, std);
}
}
usbd_status
uhci_alloc_std_chain(upipe, sc, len, rd, shortok, dma, sp, ep)
struct uhci_pipe *upipe;
uhci_softc_t *sc;
int len, rd, shortok;
usb_dma_t *dma;
uhci_soft_td_t **sp, **ep;
{
uhci_soft_td_t *p, *lastp;
uhci_physaddr_t lastlink;
int i, ntd, l, tog, maxp;
u_int32_t status;
int addr = upipe->pipe.device->address;
int endpt = upipe->pipe.endpoint->edesc->bEndpointAddress;
DPRINTFN(8, ("uhci_alloc_std_chain: addr=%d endpt=%d len=%d ls=%d "
"shortok=%d\n", addr, UE_GET_ADDR(endpt), len,
upipe->pipe.device->lowspeed, shortok));
if (len == 0) {
*sp = *ep = 0;
DPRINTFN(-1,("uhci_alloc_std_chain: len=0\n"));
return (USBD_NORMAL_COMPLETION);
}
maxp = UGETW(upipe->pipe.endpoint->edesc->wMaxPacketSize);
if (maxp == 0) {
printf("uhci_alloc_std_chain: maxp=0\n");
return (USBD_INVAL);
}
ntd = (len + maxp - 1) / maxp;
DPRINTFN(10, ("uhci_alloc_std_chain: maxp=%d ntd=%d\n", maxp, ntd));
tog = upipe->nexttoggle;
if (ntd % 2 == 0)
tog ^= 1;
upipe->nexttoggle = tog ^ 1;
lastp = 0;
lastlink = UHCI_PTR_T;
ntd--;
status = UHCI_TD_ZERO_ACTLEN(UHCI_TD_SET_ERRCNT(3) | UHCI_TD_ACTIVE);
if (upipe->pipe.device->lowspeed)
status |= UHCI_TD_LS;
if (shortok)
status |= UHCI_TD_SPD;
for (i = ntd; i >= 0; i--) {
p = uhci_alloc_std(sc);
if (p == NULL) {
uhci_free_std_chain(sc, lastp, 0);
return (USBD_NOMEM);
}
p->link.std = lastp;
if (lastlink == UHCI_PTR_T)
p->td.td_link = LE(lastlink);
else
p->td.td_link = LE(lastlink|UHCI_PTR_VF);
lastp = p;
lastlink = p->physaddr;
p->td.td_status = LE(status);
if (i == ntd) {
/* last TD */
l = len % maxp;
if (l == 0) l = maxp;
*ep = p;
} else
l = maxp;
p->td.td_token =
LE(rd ? UHCI_TD_IN (l, endpt, addr, tog) :
UHCI_TD_OUT(l, endpt, addr, tog));
p->td.td_buffer = LE(DMAADDR(dma) + i * maxp);
tog ^= 1;
}
*sp = lastp;
DPRINTFN(10, ("uhci_alloc_std_chain: nexttog=%d\n",
upipe->nexttoggle));
return (USBD_NORMAL_COMPLETION);
}
void
uhci_device_clear_toggle(pipe)
usbd_pipe_handle pipe;
{
struct uhci_pipe *upipe = (struct uhci_pipe *)pipe;
upipe->nexttoggle = 0;
}
void
uhci_noop(pipe)
usbd_pipe_handle pipe;
{
}
usbd_status
uhci_device_bulk_transfer(xfer)
usbd_xfer_handle xfer;
{
usbd_status err;
/* Insert last in queue. */
err = usb_insert_transfer(xfer);
if (err)
return (err);
/* Pipe isn't running (otherwise err would be USBD_INPROG),
* start first
*/
return (uhci_device_bulk_start(SIMPLEQ_FIRST(&xfer->pipe->queue)));
}
usbd_status
uhci_device_bulk_start(xfer)
usbd_xfer_handle xfer;
{
struct uhci_pipe *upipe = (struct uhci_pipe *)xfer->pipe;
usbd_device_handle dev = upipe->pipe.device;
uhci_softc_t *sc = (uhci_softc_t *)dev->bus;
uhci_intr_info_t *ii = upipe->iinfo;
uhci_soft_td_t *data, *dataend;
uhci_soft_qh_t *sqh;
usbd_status err;
int len, isread, endpt;
int s;
DPRINTFN(3, ("uhci_device_bulk_transfer: xfer=%p len=%d flags=%d\n",
xfer, xfer->length, xfer->flags));
#ifdef DIAGNOSTIC
if (xfer->rqflags & URQ_REQUEST)
panic("uhci_device_bulk_transfer: a request\n");
#endif
len = xfer->length;
endpt = xfer->pipe->endpoint->edesc->bEndpointAddress;
isread = UE_GET_DIR(endpt) == UE_DIR_IN;
sqh = upipe->u.bulk.sqh;
upipe->u.bulk.isread = isread;
upipe->u.bulk.length = len;
err = uhci_alloc_std_chain(upipe, sc, len, isread,
xfer->flags & USBD_SHORT_XFER_OK,
&xfer->dmabuf, &data, &dataend);
if (err)
return (err);
dataend->td.td_status |= LE(UHCI_TD_IOC);
#ifdef UHCI_DEBUG
if (uhcidebug > 8) {
DPRINTF(("uhci_device_bulk_transfer: data(1)\n"));
uhci_dump_tds(data);
}
#endif
/* Set up interrupt info. */
ii->xfer = xfer;
ii->stdstart = data;
ii->stdend = dataend;
#if defined(__FreeBSD__)
callout_handle_init(&ii->timeout_handle);
#endif
#ifdef DIAGNOSTIC
ii->isdone = 0;
#endif
sqh->elink = data;
sqh->qh.qh_elink = LE(data->physaddr);
sqh->intr_info = ii;
s = splusb();
uhci_add_bulk(sc, sqh);
LIST_INSERT_HEAD(&sc->sc_intrhead, ii, list);
if (xfer->timeout && !sc->sc_bus.use_polling) {
usb_timeout(uhci_timeout, ii, MS_TO_TICKS(xfer->timeout),
ii->timeout_handle);
}
splx(s);
#ifdef UHCI_DEBUG
if (uhcidebug > 10) {
DPRINTF(("uhci_device_bulk_transfer: data(2)\n"));
uhci_dump_tds(data);
}
#endif
if (sc->sc_bus.use_polling)
uhci_waitintr(sc, xfer);
return (USBD_IN_PROGRESS);
}
/* Abort a device bulk request. */
void
uhci_device_bulk_abort(xfer)
usbd_xfer_handle xfer;
{
DPRINTF(("uhci_device_bulk_abort:\n"));
uhci_abort_xfer(xfer, USBD_CANCELLED);
}
void
uhci_abort_xfer(xfer, status)
usbd_xfer_handle xfer;
usbd_status status;
{
struct uhci_pipe *upipe = (struct uhci_pipe *)xfer->pipe;
uhci_intr_info_t *ii = upipe->iinfo;
uhci_soft_td_t *std;
DPRINTFN(1,("uhci_abort_xfer: xfer=%p, status=%d\n", xfer, status));
/* Make interrupt routine ignore it, */
xfer->status = status;
/* don't timeout, */
usb_untimeout(uhci_timeout, ii, ii->timeout_handle);
/* make hardware ignore it, */
for (std = ii->stdstart; std != 0; std = std->link.std)
std->td.td_status &= LE(~(UHCI_TD_ACTIVE | UHCI_TD_IOC));
xfer->hcpriv = ii;
/* make sure hardware has completed, */
if (xfer->device->bus->intr_context) {
/* We have no process context, so we can't use tsleep(). */
timeout(uhci_abort_xfer_end, xfer, hz / USB_FRAMES_PER_SECOND);
} else {
#if defined(DIAGNOSTIC) && defined(__i386__) && defined(__FreeBSD__)
KASSERT(intr_nesting_level == 0,
("ohci_abort_req in interrupt context"));
#endif
usb_delay_ms(xfer->pipe->device->bus, 1);
/* and call final part of interrupt handler. */
uhci_abort_xfer_end(xfer);
}
}
void
uhci_abort_xfer_end(v)
void *v;
{
usbd_xfer_handle xfer = v;
int s;
s = splusb();
usb_transfer_complete(xfer);
splx(s);
}
/* Close a device bulk pipe. */
void
uhci_device_bulk_close(pipe)
usbd_pipe_handle pipe;
{
struct uhci_pipe *upipe = (struct uhci_pipe *)pipe;
usbd_device_handle dev = upipe->pipe.device;
uhci_softc_t *sc = (uhci_softc_t *)dev->bus;
uhci_free_sqh(sc, upipe->u.bulk.sqh);
uhci_free_intr_info(upipe->iinfo);
/* XXX free other resources */
}
usbd_status
uhci_device_ctrl_transfer(xfer)
usbd_xfer_handle xfer;
{
usbd_status err;
/* Insert last in queue. */
err = usb_insert_transfer(xfer);
if (err)
return (err);
/* Pipe isn't running (otherwise err would be USBD_INPROG),
* start first
*/
return (uhci_device_ctrl_start(SIMPLEQ_FIRST(&xfer->pipe->queue)));
}
usbd_status
uhci_device_ctrl_start(xfer)
usbd_xfer_handle xfer;
{
uhci_softc_t *sc = (uhci_softc_t *)xfer->pipe->device->bus;
usbd_status err;
#ifdef DIAGNOSTIC
if (!(xfer->rqflags & URQ_REQUEST))
panic("uhci_device_ctrl_transfer: not a request\n");
#endif
err = uhci_device_request(xfer);
if (err)
return (err);
if (sc->sc_bus.use_polling)
uhci_waitintr(sc, xfer);
return (USBD_IN_PROGRESS);
}
usbd_status
uhci_device_intr_transfer(xfer)
usbd_xfer_handle xfer;
{
usbd_status err;
/* Insert last in queue. */
err = usb_insert_transfer(xfer);
if (err)
return (err);
/* Pipe isn't running (otherwise err would be USBD_INPROG),
* start first
*/
return (uhci_device_intr_start(SIMPLEQ_FIRST(&xfer->pipe->queue)));
}
usbd_status
uhci_device_intr_start(xfer)
usbd_xfer_handle xfer;
{
struct uhci_pipe *upipe = (struct uhci_pipe *)xfer->pipe;
usbd_device_handle dev = upipe->pipe.device;
uhci_softc_t *sc = (uhci_softc_t *)dev->bus;
uhci_intr_info_t *ii = upipe->iinfo;
uhci_soft_td_t *data, *dataend;
uhci_soft_qh_t *sqh;
usbd_status err;
int i, s;
DPRINTFN(3,("uhci_device_intr_transfer: xfer=%p len=%d flags=%d\n",
xfer, xfer->length, xfer->flags));
#ifdef DIAGNOSTIC
if (xfer->rqflags & URQ_REQUEST)
panic("uhci_device_intr_transfer: a request\n");
#endif
err = uhci_alloc_std_chain(upipe, sc, xfer->length, 1,
xfer->flags & USBD_SHORT_XFER_OK,
&xfer->dmabuf, &data, &dataend);
if (err)
return (err);
dataend->td.td_status |= LE(UHCI_TD_IOC);
#ifdef UHCI_DEBUG
if (uhcidebug > 10) {
DPRINTF(("uhci_device_intr_transfer: data(1)\n"));
uhci_dump_tds(data);
uhci_dump_qh(upipe->u.intr.qhs[0]);
}
#endif
s = splusb();
/* Set up interrupt info. */
ii->xfer = xfer;
ii->stdstart = data;
ii->stdend = dataend;
#if defined(__FreeBSD__)
callout_handle_init(&ii->timeout_handle);
#endif
#ifdef DIAGNOSTIC
ii->isdone = 0;
#endif
DPRINTFN(10,("uhci_device_intr_transfer: qhs[0]=%p\n",
upipe->u.intr.qhs[0]));
for (i = 0; i < upipe->u.intr.npoll; i++) {
sqh = upipe->u.intr.qhs[i];
sqh->elink = data;
sqh->qh.qh_elink = LE(data->physaddr);
}
splx(s);
#ifdef UHCI_DEBUG
if (uhcidebug > 10) {
DPRINTF(("uhci_device_intr_transfer: data(2)\n"));
uhci_dump_tds(data);
uhci_dump_qh(upipe->u.intr.qhs[0]);
}
#endif
return (USBD_IN_PROGRESS);
}
/* Abort a device control request. */
void
uhci_device_ctrl_abort(xfer)
usbd_xfer_handle xfer;
{
DPRINTF(("uhci_device_ctrl_abort:\n"));
uhci_abort_xfer(xfer, USBD_CANCELLED);
}
/* Close a device control pipe. */
void
uhci_device_ctrl_close(pipe)
usbd_pipe_handle pipe;
{
struct uhci_pipe *upipe = (struct uhci_pipe *)pipe;
uhci_free_intr_info(upipe->iinfo);
/* XXX free other resources? */
}
/* Abort a device interrupt request. */
void
uhci_device_intr_abort(xfer)
usbd_xfer_handle xfer;
{
DPRINTFN(1,("uhci_device_intr_abort: xfer=%p\n", xfer));
if (xfer->pipe->intrxfer == xfer) {
DPRINTFN(1,("uhci_device_intr_abort: remove\n"));
xfer->pipe->intrxfer = 0;
}
uhci_abort_xfer(xfer, USBD_CANCELLED);
}
/* Close a device interrupt pipe. */
void
uhci_device_intr_close(pipe)
usbd_pipe_handle pipe;
{
struct uhci_pipe *upipe = (struct uhci_pipe *)pipe;
uhci_softc_t *sc = (uhci_softc_t *)pipe->device->bus;
int i, s, npoll;
upipe->iinfo->stdstart = 0; /* inactive */
/* Unlink descriptors from controller data structures. */
npoll = upipe->u.intr.npoll;
uhci_lock_frames(sc);
for (i = 0; i < npoll; i++)
uhci_remove_intr(sc, upipe->u.intr.qhs[i]->pos,
upipe->u.intr.qhs[i]);
uhci_unlock_frames(sc);
/*
* We now have to wait for any activity on the physical
* descriptors to stop.
*/
usb_delay_ms(&sc->sc_bus, 2);
for(i = 0; i < npoll; i++)
uhci_free_sqh(sc, upipe->u.intr.qhs[i]);
free(upipe->u.intr.qhs, M_USBHC);
s = splusb();
LIST_REMOVE(upipe->iinfo, list); /* remove from active list */
splx(s);
uhci_free_intr_info(upipe->iinfo);
/* XXX free other resources */
}
usbd_status
uhci_device_request(xfer)
usbd_xfer_handle xfer;
{
struct uhci_pipe *upipe = (struct uhci_pipe *)xfer->pipe;
usb_device_request_t *req = &xfer->request;
usbd_device_handle dev = upipe->pipe.device;
uhci_softc_t *sc = (uhci_softc_t *)dev->bus;
int addr = dev->address;
int endpt = upipe->pipe.endpoint->edesc->bEndpointAddress;
uhci_intr_info_t *ii = upipe->iinfo;
uhci_soft_td_t *setup, *data, *stat, *next, *dataend;
uhci_soft_qh_t *sqh;
int len;
u_int32_t ls;
usbd_status err;
int isread;
int s;
DPRINTFN(3,("uhci_device_control type=0x%02x, request=0x%02x, "
"wValue=0x%04x, wIndex=0x%04x len=%d, addr=%d, endpt=%d\n",
req->bmRequestType, req->bRequest, UGETW(req->wValue),
UGETW(req->wIndex), UGETW(req->wLength),
addr, endpt));
ls = dev->lowspeed ? UHCI_TD_LS : 0;
isread = req->bmRequestType & UT_READ;
len = UGETW(req->wLength);
setup = upipe->u.ctl.setup;
stat = upipe->u.ctl.stat;
sqh = upipe->u.ctl.sqh;
/* Set up data transaction */
if (len != 0) {
upipe->nexttoggle = 1;
err = uhci_alloc_std_chain(upipe, sc, len, isread,
xfer->flags & USBD_SHORT_XFER_OK,
&xfer->dmabuf, &data, &dataend);
if (err)
return (err);
next = data;
dataend->link.std = stat;
dataend->td.td_link = LE(stat->physaddr|UHCI_PTR_VF);
} else {
next = stat;
}
upipe->u.ctl.length = len;
memcpy(KERNADDR(&upipe->u.ctl.reqdma), req, sizeof *req);
setup->link.std = next;
setup->td.td_link = LE(next->physaddr|UHCI_PTR_VF);
setup->td.td_status = LE(UHCI_TD_SET_ERRCNT(3) | ls | UHCI_TD_ACTIVE);
setup->td.td_token = LE(UHCI_TD_SETUP(sizeof *req, endpt, addr));
setup->td.td_buffer = LE(DMAADDR(&upipe->u.ctl.reqdma));
stat->link.std = 0;
stat->td.td_link = LE(UHCI_PTR_T);
stat->td.td_status = LE(UHCI_TD_SET_ERRCNT(3) | ls |
UHCI_TD_ACTIVE | UHCI_TD_IOC);
stat->td.td_token =
LE(isread ? UHCI_TD_OUT(0, endpt, addr, 1) :
UHCI_TD_IN (0, endpt, addr, 1));
stat->td.td_buffer = LE(0);
#ifdef UHCI_DEBUG
if (uhcidebug > 10) {
DPRINTF(("uhci_device_request: before transfer\n"));
uhci_dump_tds(setup);
}
#endif
/* Set up interrupt info. */
ii->xfer = xfer;
ii->stdstart = setup;
ii->stdend = stat;
#if defined(__FreeBSD__)
callout_handle_init(&ii->timeout_handle);
#endif
#ifdef DIAGNOSTIC
ii->isdone = 0;
#endif
sqh->elink = setup;
sqh->qh.qh_elink = LE(setup->physaddr);
sqh->intr_info = ii;
s = splusb();
uhci_add_ctrl(sc, sqh);
LIST_INSERT_HEAD(&sc->sc_intrhead, ii, list);
#ifdef UHCI_DEBUG
if (uhcidebug > 12) {
uhci_soft_td_t *std;
uhci_soft_qh_t *xqh;
uhci_soft_qh_t *sxqh;
int maxqh = 0;
uhci_physaddr_t link;
DPRINTF(("uhci_enter_ctl_q: follow from [0]\n"));
for (std = sc->sc_vframes[0].htd, link = 0;
(link & UHCI_PTR_Q) == 0;
std = std->link.std) {
link = LE(std->td.td_link);
uhci_dump_td(std);
}
sxqh = (uhci_soft_qh_t *)std;
uhci_dump_qh(sxqh);
for (xqh = sxqh;
xqh != NULL;
xqh = (maxqh++ == 5 || xqh->hlink==sxqh ||
xqh->hlink==xqh ? NULL : xqh->hlink)) {
uhci_dump_qh(xqh);
}
DPRINTF(("Enqueued QH:\n"));
uhci_dump_qh(sqh);
uhci_dump_tds(sqh->elink);
}
#endif
if (xfer->timeout && !sc->sc_bus.use_polling) {
usb_timeout(uhci_timeout, ii,
MS_TO_TICKS(xfer->timeout), ii->timeout_handle);
}
splx(s);
return (USBD_NORMAL_COMPLETION);
}
usbd_status
uhci_device_isoc_transfer(xfer)
usbd_xfer_handle xfer;
{
usbd_status err;
DPRINTFN(5,("uhci_device_isoc_transfer: xfer=%p\n", xfer));
/* Put it on our queue, */
err = usb_insert_transfer(xfer);
/* bail out on error, */
if (err && err != USBD_IN_PROGRESS)
return (err);
/* XXX should check inuse here */
/* insert into schedule, */
uhci_device_isoc_enter(xfer);
/* and put on interrupt list if the pipe wasn't running */
if (!err)
uhci_device_isoc_start(SIMPLEQ_FIRST(&xfer->pipe->queue));
return (err);
}
void
uhci_device_isoc_enter(xfer)
usbd_xfer_handle xfer;
{
struct uhci_pipe *upipe = (struct uhci_pipe *)xfer->pipe;
usbd_device_handle dev = upipe->pipe.device;
uhci_softc_t *sc = (uhci_softc_t *)dev->bus;
struct iso *iso = &upipe->u.iso;
uhci_soft_td_t *std;
u_int32_t buf, len, status;
int s, i, next, nframes;
DPRINTFN(5,("uhci_device_isoc_enter: used=%d next=%d xfer=%p "
"nframes=%d\n",
iso->inuse, iso->next, xfer, xfer->nframes));
if (xfer->status == USBD_IN_PROGRESS) {
/* This request has already been entered into the frame list */
/* XXX */
}
#ifdef DIAGNOSTIC
if (iso->inuse >= UHCI_VFRAMELIST_COUNT)
printf("uhci_device_isoc_enter: overflow!\n");
#endif
next = iso->next;
if (next == -1) {
/* Not in use yet, schedule it a few frames ahead. */
next = (UREAD2(sc, UHCI_FRNUM) + 3) % UHCI_VFRAMELIST_COUNT;
DPRINTFN(2,("uhci_device_isoc_enter: start next=%d\n", next));
}
xfer->status = USBD_IN_PROGRESS;
xfer->hcprivint = next;
buf = DMAADDR(&xfer->dmabuf);
status = LE(UHCI_TD_ZERO_ACTLEN(UHCI_TD_SET_ERRCNT(0) |
UHCI_TD_ACTIVE |
UHCI_TD_IOS));
nframes = xfer->nframes;
s = splusb();
for (i = 0; i < nframes; i++) {
std = iso->stds[next];
if (++next >= UHCI_VFRAMELIST_COUNT)
next = 0;
len = xfer->frlengths[i];
std->td.td_buffer = LE(buf);
if (i == nframes - 1)
status |= LE(UHCI_TD_IOC);
std->td.td_status = status;
std->td.td_token &= LE(~UHCI_TD_MAXLEN_MASK);
std->td.td_token |= LE(UHCI_TD_SET_MAXLEN(len));
#ifdef UHCI_DEBUG
if (uhcidebug > 5) {
DPRINTFN(5,("uhci_device_isoc_enter: TD %d\n", i));
uhci_dump_td(std);
}
#endif
buf += len;
}
iso->next = next;
iso->inuse += xfer->nframes;
splx(s);
}
usbd_status
uhci_device_isoc_start(xfer)
usbd_xfer_handle xfer;
{
struct uhci_pipe *upipe = (struct uhci_pipe *)xfer->pipe;
uhci_softc_t *sc = (uhci_softc_t *)upipe->pipe.device->bus;
uhci_intr_info_t *ii = upipe->iinfo;
uhci_soft_td_t *end;
int s, i;
#ifdef DIAGNOSTIC
if (xfer->status != USBD_IN_PROGRESS)
printf("uhci_device_isoc_start: not in progress %p\n", xfer);
#endif
/* Find the last TD */
i = xfer->hcprivint + xfer->nframes;
if (i >= UHCI_VFRAMELIST_COUNT)
i -= UHCI_VFRAMELIST_COUNT;
end = upipe->u.iso.stds[i];
s = splusb();
/* Set up interrupt info. */
ii->xfer = xfer;
ii->stdstart = end;
ii->stdend = end;
#if defined(__FreeBSD__)
callout_handle_init(&ii->timeout_handle);
#endif
#ifdef DIAGNOSTIC
ii->isdone = 0;
#endif
LIST_INSERT_HEAD(&sc->sc_intrhead, ii, list);
splx(s);
return (USBD_IN_PROGRESS);
}
void
uhci_device_isoc_abort(xfer)
usbd_xfer_handle xfer;
{
struct uhci_pipe *upipe = (struct uhci_pipe *)xfer->pipe;
uhci_intr_info_t *ii = upipe->iinfo;
uhci_soft_td_t **stds = upipe->u.iso.stds;
uhci_soft_td_t *std;
int i, n, nframes;
/* Make interrupt routine ignore it, */
xfer->status = USBD_CANCELLED;
/* make hardware ignore it, */
nframes = xfer->nframes;
n = xfer->hcprivint;
for (i = 0; i < nframes; i++) {
std = stds[n];
std->td.td_status &= LE(~(UHCI_TD_ACTIVE | UHCI_TD_IOC));
if (++n >= UHCI_VFRAMELIST_COUNT)
n = 0;
}
xfer->hcpriv = ii;
/* make sure hardware has completed, */
if (xfer->device->bus->intr_context) {
/* We have no process context, so we can't use tsleep(). */
timeout(uhci_abort_xfer_end, xfer, hz / USB_FRAMES_PER_SECOND);
} else {
usb_delay_ms(xfer->pipe->device->bus, 1);
/* and call final part of interrupt handler. */
uhci_abort_xfer_end(xfer);
}
}
void
uhci_device_isoc_close(pipe)
usbd_pipe_handle pipe;
{
struct uhci_pipe *upipe = (struct uhci_pipe *)pipe;
usbd_device_handle dev = upipe->pipe.device;
uhci_softc_t *sc = (uhci_softc_t *)dev->bus;
uhci_soft_td_t *std, *vstd;
struct iso *iso;
int i;
/*
* Make sure all TDs are marked as inactive.
* Wait for completion.
* Unschedule.
* Deallocate.
*/
iso = &upipe->u.iso;
for (i = 0; i < UHCI_VFRAMELIST_COUNT; i++)
iso->stds[i]->td.td_status &= LE(~UHCI_TD_ACTIVE);
usb_delay_ms(&sc->sc_bus, 2); /* wait for completion */
uhci_lock_frames(sc);
for (i = 0; i < UHCI_VFRAMELIST_COUNT; i++) {
std = iso->stds[i];
for (vstd = sc->sc_vframes[i].htd;
vstd != NULL && vstd->link.std != std;
vstd = vstd->link.std)
;
if (vstd == NULL) {
/*panic*/
printf("uhci_device_isoc_close: %p not found\n", std);
uhci_unlock_frames(sc);
return;
}
vstd->link = std->link;
vstd->td.td_link = std->td.td_link;
uhci_free_std(sc, std);
}
uhci_unlock_frames(sc);
free(iso->stds, M_USBHC);
}
usbd_status
uhci_setup_isoc(pipe)
usbd_pipe_handle pipe;
{
struct uhci_pipe *upipe = (struct uhci_pipe *)pipe;
usbd_device_handle dev = upipe->pipe.device;
uhci_softc_t *sc = (uhci_softc_t *)dev->bus;
int addr = upipe->pipe.device->address;
int endpt = upipe->pipe.endpoint->edesc->bEndpointAddress;
int rd = UE_GET_DIR(endpt) == UE_DIR_IN;
uhci_soft_td_t *std, *vstd;
u_int32_t token;
struct iso *iso;
int i;
iso = &upipe->u.iso;
iso->stds = malloc(UHCI_VFRAMELIST_COUNT * sizeof (uhci_soft_td_t *),
M_USBHC, M_WAITOK);
token = LE(rd ? UHCI_TD_IN (0, endpt, addr, 0) :
UHCI_TD_OUT(0, endpt, addr, 0));
/* Allocate the TDs and mark as inactive; */
for (i = 0; i < UHCI_VFRAMELIST_COUNT; i++) {
std = uhci_alloc_std(sc);
if (std == 0)
goto bad;
std->td.td_status = LE(UHCI_TD_IOS); /* iso, inactive */
std->td.td_token = token;
iso->stds[i] = std;
}
/* Insert TDs into schedule. */
uhci_lock_frames(sc);
for (i = 0; i < UHCI_VFRAMELIST_COUNT; i++) {
std = iso->stds[i];
vstd = sc->sc_vframes[i].htd;
std->link = vstd->link;
std->td.td_link = vstd->td.td_link;
vstd->link.std = std;
vstd->td.td_link = LE(std->physaddr);
}
uhci_unlock_frames(sc);
iso->next = -1;
iso->inuse = 0;
return (USBD_NORMAL_COMPLETION);
bad:
while (--i >= 0)
uhci_free_std(sc, iso->stds[i]);
free(iso->stds, M_USBHC);
return (USBD_NOMEM);
}
void
uhci_device_isoc_done(xfer)
usbd_xfer_handle xfer;
{
uhci_intr_info_t *ii = xfer->hcpriv;
DPRINTFN(4, ("uhci_isoc_done: length=%d\n", xfer->actlen));
/* Turn off the interrupt since it is active even if the TD is not. */
ii->stdend->td.td_status &= LE(~UHCI_TD_IOC);
LIST_REMOVE(ii, list); /* remove from active list */
}
void
uhci_device_intr_done(xfer)
usbd_xfer_handle xfer;
{
uhci_intr_info_t *ii = xfer->hcpriv;
uhci_softc_t *sc = ii->sc;
struct uhci_pipe *upipe = (struct uhci_pipe *)xfer->pipe;
uhci_soft_qh_t *sqh;
int i, npoll;
DPRINTFN(5, ("uhci_intr_done: length=%d\n", xfer->actlen));
npoll = upipe->u.intr.npoll;
for(i = 0; i < npoll; i++) {
sqh = upipe->u.intr.qhs[i];
sqh->elink = 0;
sqh->qh.qh_elink = LE(UHCI_PTR_T);
}
uhci_free_std_chain(sc, ii->stdstart, 0);
/* XXX Wasteful. */
if (xfer->pipe->repeat) {
uhci_soft_td_t *data, *dataend;
/* This alloc cannot fail since we freed the chain above. */
uhci_alloc_std_chain(upipe, sc, xfer->length, 1,
xfer->flags & USBD_SHORT_XFER_OK,
&xfer->dmabuf, &data, &dataend);
dataend->td.td_status |= LE(UHCI_TD_IOC);
#ifdef UHCI_DEBUG
if (uhcidebug > 10) {
DPRINTF(("uhci_device_intr_done: data(1)\n"));
uhci_dump_tds(data);
uhci_dump_qh(upipe->u.intr.qhs[0]);
}
#endif
ii->stdstart = data;
ii->stdend = dataend;
#if defined(__FreeBSD__)
callout_handle_init(&ii->timeout_handle);
#endif
#ifdef DIAGNOSTIC
ii->isdone = 0;
#endif
for (i = 0; i < npoll; i++) {
sqh = upipe->u.intr.qhs[i];
sqh->elink = data;
sqh->qh.qh_elink = LE(data->physaddr);
}
} else {
ii->stdstart = 0; /* mark as inactive */
}
}
/* Deallocate request data structures */
void
uhci_device_ctrl_done(xfer)
usbd_xfer_handle xfer;
{
uhci_intr_info_t *ii = xfer->hcpriv;
uhci_softc_t *sc = ii->sc;
struct uhci_pipe *upipe = (struct uhci_pipe *)xfer->pipe;
#ifdef DIAGNOSTIC
if (!(xfer->rqflags & URQ_REQUEST))
panic("uhci_ctrl_done: not a request\n");
#endif
LIST_REMOVE(ii, list); /* remove from active list */
uhci_remove_ctrl(sc, upipe->u.ctl.sqh);
if (upipe->u.ctl.length != 0)
uhci_free_std_chain(sc, ii->stdstart->link.std, ii->stdend);
DPRINTFN(5, ("uhci_ctrl_done: length=%d\n", xfer->actlen));
}
/* Deallocate request data structures */
void
uhci_device_bulk_done(xfer)
usbd_xfer_handle xfer;
{
uhci_intr_info_t *ii = xfer->hcpriv;
uhci_softc_t *sc = ii->sc;
struct uhci_pipe *upipe = (struct uhci_pipe *)xfer->pipe;
LIST_REMOVE(ii, list); /* remove from active list */
uhci_remove_bulk(sc, upipe->u.bulk.sqh);
uhci_free_std_chain(sc, ii->stdstart, 0);
DPRINTFN(5, ("uhci_bulk_done: length=%d\n", xfer->actlen));
}
/* Add interrupt QH, called with vflock. */
void
uhci_add_intr(sc, n, sqh)
uhci_softc_t *sc;
int n;
uhci_soft_qh_t *sqh;
{
struct uhci_vframe *vf = &sc->sc_vframes[n];
uhci_soft_qh_t *eqh;
DPRINTFN(4, ("uhci_add_intr: n=%d sqh=%p\n", n, sqh));
eqh = vf->eqh;
sqh->hlink = eqh->hlink;
sqh->qh.qh_hlink = eqh->qh.qh_hlink;
eqh->hlink = sqh;
eqh->qh.qh_hlink = LE(sqh->physaddr | UHCI_PTR_Q);
vf->eqh = sqh;
vf->bandwidth++;
}
/* Remove interrupt QH, called with vflock. */
void
uhci_remove_intr(sc, n, sqh)
uhci_softc_t *sc;
int n;
uhci_soft_qh_t *sqh;
{
struct uhci_vframe *vf = &sc->sc_vframes[n];
uhci_soft_qh_t *pqh;
DPRINTFN(4, ("uhci_remove_intr: n=%d sqh=%p\n", n, sqh));
for (pqh = vf->hqh; pqh->hlink != sqh; pqh = pqh->hlink)
#if defined(DIAGNOSTIC) || defined(UHCI_DEBUG)
if (LE(pqh->qh.qh_hlink) & UHCI_PTR_T) {
DPRINTF(("uhci_remove_intr: QH not found\n"));
return;
}
#else
;
#endif
pqh->hlink = sqh->hlink;
pqh->qh.qh_hlink = sqh->qh.qh_hlink;
if (vf->eqh == sqh)
vf->eqh = pqh;
vf->bandwidth--;
}
usbd_status
uhci_device_setintr(sc, upipe, ival)
uhci_softc_t *sc;
struct uhci_pipe *upipe;
int ival;
{
uhci_soft_qh_t *sqh;
int i, npoll, s;
u_int bestbw, bw, bestoffs, offs;
DPRINTFN(2, ("uhci_setintr: pipe=%p\n", upipe));
if (ival == 0) {
printf("uhci_setintr: 0 interval\n");
return (USBD_INVAL);
}
if (ival > UHCI_VFRAMELIST_COUNT)
ival = UHCI_VFRAMELIST_COUNT;
npoll = (UHCI_VFRAMELIST_COUNT + ival - 1) / ival;
DPRINTFN(2, ("uhci_setintr: ival=%d npoll=%d\n", ival, npoll));
upipe->u.intr.npoll = npoll;
upipe->u.intr.qhs =
malloc(npoll * sizeof(uhci_soft_qh_t *), M_USBHC, M_WAITOK);
/*
* Figure out which offset in the schedule that has most
* bandwidth left over.
*/
#define MOD(i) ((i) & (UHCI_VFRAMELIST_COUNT-1))
for (bestoffs = offs = 0, bestbw = ~0; offs < ival; offs++) {
for (bw = i = 0; i < npoll; i++)
bw += sc->sc_vframes[MOD(i * ival + offs)].bandwidth;
if (bw < bestbw) {
bestbw = bw;
bestoffs = offs;
}
}
DPRINTFN(1, ("uhci_setintr: bw=%d offs=%d\n", bestbw, bestoffs));
upipe->iinfo->stdstart = 0;
for(i = 0; i < npoll; i++) {
upipe->u.intr.qhs[i] = sqh = uhci_alloc_sqh(sc);
sqh->elink = 0;
sqh->qh.qh_elink = LE(UHCI_PTR_T);
sqh->pos = MOD(i * ival + bestoffs);
sqh->intr_info = upipe->iinfo;
}
#undef MOD
s = splusb();
LIST_INSERT_HEAD(&sc->sc_intrhead, upipe->iinfo, list);
splx(s);
uhci_lock_frames(sc);
/* Enter QHs into the controller data structures. */
for(i = 0; i < npoll; i++)
uhci_add_intr(sc, upipe->u.intr.qhs[i]->pos,
upipe->u.intr.qhs[i]);
uhci_unlock_frames(sc);
DPRINTFN(5, ("uhci_setintr: returns %p\n", upipe));
return (USBD_NORMAL_COMPLETION);
}
/* Open a new pipe. */
usbd_status
uhci_open(pipe)
usbd_pipe_handle pipe;
{
uhci_softc_t *sc = (uhci_softc_t *)pipe->device->bus;
struct uhci_pipe *upipe = (struct uhci_pipe *)pipe;
usb_endpoint_descriptor_t *ed = pipe->endpoint->edesc;
usbd_status err;
DPRINTFN(1, ("uhci_open: pipe=%p, addr=%d, endpt=%d (%d)\n",
pipe, pipe->device->address,
ed->bEndpointAddress, sc->sc_addr));
if (pipe->device->address == sc->sc_addr) {
switch (ed->bEndpointAddress) {
case USB_CONTROL_ENDPOINT:
pipe->methods = &uhci_root_ctrl_methods;
break;
case UE_DIR_IN | UHCI_INTR_ENDPT:
pipe->methods = &uhci_root_intr_methods;
break;
default:
return (USBD_INVAL);
}
} else {
upipe->iinfo = uhci_alloc_intr_info(sc);
if (upipe->iinfo == 0)
return (USBD_NOMEM);
switch (ed->bmAttributes & UE_XFERTYPE) {
case UE_CONTROL:
pipe->methods = &uhci_device_ctrl_methods;
upipe->u.ctl.sqh = uhci_alloc_sqh(sc);
if (upipe->u.ctl.sqh == NULL)
goto bad;
upipe->u.ctl.setup = uhci_alloc_std(sc);
if (upipe->u.ctl.setup == NULL) {
uhci_free_sqh(sc, upipe->u.ctl.sqh);
goto bad;
}
upipe->u.ctl.stat = uhci_alloc_std(sc);
if (upipe->u.ctl.stat == NULL) {
uhci_free_sqh(sc, upipe->u.ctl.sqh);
uhci_free_std(sc, upipe->u.ctl.setup);
goto bad;
}
err = usb_allocmem(&sc->sc_bus,
sizeof(usb_device_request_t),
0, &upipe->u.ctl.reqdma);
if (err) {
uhci_free_sqh(sc, upipe->u.ctl.sqh);
uhci_free_std(sc, upipe->u.ctl.setup);
uhci_free_std(sc, upipe->u.ctl.stat);
goto bad;
}
break;
case UE_INTERRUPT:
pipe->methods = &uhci_device_intr_methods;
return (uhci_device_setintr(sc, upipe, ed->bInterval));
case UE_ISOCHRONOUS:
pipe->methods = &uhci_device_isoc_methods;
return (uhci_setup_isoc(pipe));
case UE_BULK:
pipe->methods = &uhci_device_bulk_methods;
upipe->u.bulk.sqh = uhci_alloc_sqh(sc);
if (upipe->u.bulk.sqh == NULL)
goto bad;
break;
}
}
return (USBD_NORMAL_COMPLETION);
bad:
uhci_free_intr_info(upipe->iinfo);
return (USBD_NOMEM);
}
/*
* Data structures and routines to emulate the root hub.
*/
usb_device_descriptor_t uhci_devd = {
USB_DEVICE_DESCRIPTOR_SIZE,
UDESC_DEVICE, /* type */
{0x00, 0x01}, /* USB version */
UCLASS_HUB, /* class */
USUBCLASS_HUB, /* subclass */
0, /* protocol */
64, /* max packet */
{0},{0},{0x00,0x01}, /* device id */
1,2,0, /* string indicies */
1 /* # of configurations */
};
usb_config_descriptor_t uhci_confd = {
USB_CONFIG_DESCRIPTOR_SIZE,
UDESC_CONFIG,
{USB_CONFIG_DESCRIPTOR_SIZE +
USB_INTERFACE_DESCRIPTOR_SIZE +
USB_ENDPOINT_DESCRIPTOR_SIZE},
1,
1,
0,
UC_SELF_POWERED,
0 /* max power */
};
usb_interface_descriptor_t uhci_ifcd = {
USB_INTERFACE_DESCRIPTOR_SIZE,
UDESC_INTERFACE,
0,
0,
1,
UCLASS_HUB,
USUBCLASS_HUB,
0,
0
};
usb_endpoint_descriptor_t uhci_endpd = {
USB_ENDPOINT_DESCRIPTOR_SIZE,
UDESC_ENDPOINT,
UE_DIR_IN | UHCI_INTR_ENDPT,
UE_INTERRUPT,
{8},
255
};
usb_hub_descriptor_t uhci_hubd_piix = {
USB_HUB_DESCRIPTOR_SIZE,
UDESC_HUB,
2,
{ UHD_PWR_NO_SWITCH | UHD_OC_INDIVIDUAL, 0 },
50, /* power on to power good */
0,
{ 0x00 }, /* both ports are removable */
};
int
uhci_str(p, l, s)
usb_string_descriptor_t *p;
int l;
char *s;
{
int i;
if (l == 0)
return (0);
p->bLength = 2 * strlen(s) + 2;
if (l == 1)
return (1);
p->bDescriptorType = UDESC_STRING;
l -= 2;
for (i = 0; s[i] && l > 1; i++, l -= 2)
USETW2(p->bString[i], 0, s[i]);
return (2*i+2);
}
/*
* Simulate a hardware hub by handling all the necessary requests.
*/
usbd_status
uhci_root_ctrl_transfer(xfer)
usbd_xfer_handle xfer;
{
usbd_status err;
/* Insert last in queue. */
err = usb_insert_transfer(xfer);
if (err)
return (err);
/* Pipe isn't running (otherwise err would be USBD_INPROG),
* start first
*/
return (uhci_root_ctrl_start(SIMPLEQ_FIRST(&xfer->pipe->queue)));
}
usbd_status
uhci_root_ctrl_start(xfer)
usbd_xfer_handle xfer;
{
uhci_softc_t *sc = (uhci_softc_t *)xfer->pipe->device->bus;
usb_device_request_t *req;
void *buf = NULL;
int port, x;
int s, len, value, index, status, change, l, totlen = 0;
usb_port_status_t ps;
usbd_status err;
#ifdef DIAGNOSTIC
if (!(xfer->rqflags & URQ_REQUEST))
panic("uhci_root_ctrl_transfer: not a request\n");
#endif
req = &xfer->request;
DPRINTFN(2,("uhci_root_ctrl_control type=0x%02x request=%02x\n",
req->bmRequestType, req->bRequest));
len = UGETW(req->wLength);
value = UGETW(req->wValue);
index = UGETW(req->wIndex);
if (len != 0)
buf = KERNADDR(&xfer->dmabuf);
#define C(x,y) ((x) | ((y) << 8))
switch(C(req->bRequest, req->bmRequestType)) {
case C(UR_CLEAR_FEATURE, UT_WRITE_DEVICE):
case C(UR_CLEAR_FEATURE, UT_WRITE_INTERFACE):
case C(UR_CLEAR_FEATURE, UT_WRITE_ENDPOINT):
/*
* DEVICE_REMOTE_WAKEUP and ENDPOINT_HALT are no-ops
* for the integrated root hub.
*/
break;
case C(UR_GET_CONFIG, UT_READ_DEVICE):
if (len > 0) {
*(u_int8_t *)buf = sc->sc_conf;
totlen = 1;
}
break;
case C(UR_GET_DESCRIPTOR, UT_READ_DEVICE):
DPRINTFN(2,("uhci_root_ctrl_control wValue=0x%04x\n", value));
switch(value >> 8) {
case UDESC_DEVICE:
if ((value & 0xff) != 0) {
err = USBD_IOERROR;
goto ret;
}
totlen = l = min(len, USB_DEVICE_DESCRIPTOR_SIZE);
USETW(uhci_devd.idVendor, sc->sc_id_vendor);
memcpy(buf, &uhci_devd, l);
break;
case UDESC_CONFIG:
if ((value & 0xff) != 0) {
err = USBD_IOERROR;
goto ret;
}
totlen = l = min(len, USB_CONFIG_DESCRIPTOR_SIZE);
memcpy(buf, &uhci_confd, l);
buf = (char *)buf + l;
len -= l;
l = min(len, USB_INTERFACE_DESCRIPTOR_SIZE);
totlen += l;
memcpy(buf, &uhci_ifcd, l);
buf = (char *)buf + l;
len -= l;
l = min(len, USB_ENDPOINT_DESCRIPTOR_SIZE);
totlen += l;
memcpy(buf, &uhci_endpd, l);
break;
case UDESC_STRING:
if (len == 0)
break;
*(u_int8_t *)buf = 0;
totlen = 1;
switch (value & 0xff) {
case 1: /* Vendor */
totlen = uhci_str(buf, len, sc->sc_vendor);
break;
case 2: /* Product */
totlen = uhci_str(buf, len, "UHCI root hub");
break;
}
break;
default:
err = USBD_IOERROR;
goto ret;
}
break;
case C(UR_GET_INTERFACE, UT_READ_INTERFACE):
if (len > 0) {
*(u_int8_t *)buf = 0;
totlen = 1;
}
break;
case C(UR_GET_STATUS, UT_READ_DEVICE):
if (len > 1) {
USETW(((usb_status_t *)buf)->wStatus,UDS_SELF_POWERED);
totlen = 2;
}
break;
case C(UR_GET_STATUS, UT_READ_INTERFACE):
case C(UR_GET_STATUS, UT_READ_ENDPOINT):
if (len > 1) {
USETW(((usb_status_t *)buf)->wStatus, 0);
totlen = 2;
}
break;
case C(UR_SET_ADDRESS, UT_WRITE_DEVICE):
if (value >= USB_MAX_DEVICES) {
err = USBD_IOERROR;
goto ret;
}
sc->sc_addr = value;
break;
case C(UR_SET_CONFIG, UT_WRITE_DEVICE):
if (value != 0 && value != 1) {
err = USBD_IOERROR;
goto ret;
}
sc->sc_conf = value;
break;
case C(UR_SET_DESCRIPTOR, UT_WRITE_DEVICE):
break;
case C(UR_SET_FEATURE, UT_WRITE_DEVICE):
case C(UR_SET_FEATURE, UT_WRITE_INTERFACE):
case C(UR_SET_FEATURE, UT_WRITE_ENDPOINT):
err = USBD_IOERROR;
goto ret;
case C(UR_SET_INTERFACE, UT_WRITE_INTERFACE):
break;
case C(UR_SYNCH_FRAME, UT_WRITE_ENDPOINT):
break;
/* Hub requests */
case C(UR_CLEAR_FEATURE, UT_WRITE_CLASS_DEVICE):
break;
case C(UR_CLEAR_FEATURE, UT_WRITE_CLASS_OTHER):
DPRINTFN(3, ("uhci_root_ctrl_control: UR_CLEAR_PORT_FEATURE "
"port=%d feature=%d\n",
index, value));
if (index == 1)
port = UHCI_PORTSC1;
else if (index == 2)
port = UHCI_PORTSC2;
else {
err = USBD_IOERROR;
goto ret;
}
switch(value) {
case UHF_PORT_ENABLE:
x = UREAD2(sc, port);
UWRITE2(sc, port, x & ~UHCI_PORTSC_PE);
break;
case UHF_PORT_SUSPEND:
x = UREAD2(sc, port);
UWRITE2(sc, port, x & ~UHCI_PORTSC_SUSP);
break;
case UHF_PORT_RESET:
x = UREAD2(sc, port);
UWRITE2(sc, port, x & ~UHCI_PORTSC_PR);
break;
case UHF_C_PORT_CONNECTION:
x = UREAD2(sc, port);
UWRITE2(sc, port, x | UHCI_PORTSC_CSC);
break;
case UHF_C_PORT_ENABLE:
x = UREAD2(sc, port);
UWRITE2(sc, port, x | UHCI_PORTSC_POEDC);
break;
case UHF_C_PORT_OVER_CURRENT:
x = UREAD2(sc, port);
UWRITE2(sc, port, x | UHCI_PORTSC_OCIC);
break;
case UHF_C_PORT_RESET:
sc->sc_isreset = 0;
err = USBD_NORMAL_COMPLETION;
goto ret;
case UHF_PORT_CONNECTION:
case UHF_PORT_OVER_CURRENT:
case UHF_PORT_POWER:
case UHF_PORT_LOW_SPEED:
case UHF_C_PORT_SUSPEND:
default:
err = USBD_IOERROR;
goto ret;
}
break;
case C(UR_GET_BUS_STATE, UT_READ_CLASS_OTHER):
if (index == 1)
port = UHCI_PORTSC1;
else if (index == 2)
port = UHCI_PORTSC2;
else {
err = USBD_IOERROR;
goto ret;
}
if (len > 0) {
*(u_int8_t *)buf =
(UREAD2(sc, port) & UHCI_PORTSC_LS) >>
UHCI_PORTSC_LS_SHIFT;
totlen = 1;
}
break;
case C(UR_GET_DESCRIPTOR, UT_READ_CLASS_DEVICE):
if (value != 0) {
err = USBD_IOERROR;
goto ret;
}
l = min(len, USB_HUB_DESCRIPTOR_SIZE);
totlen = l;
memcpy(buf, &uhci_hubd_piix, l);
break;
case C(UR_GET_STATUS, UT_READ_CLASS_DEVICE):
if (len != 4) {
err = USBD_IOERROR;
goto ret;
}
memset(buf, 0, len);
totlen = len;
break;
case C(UR_GET_STATUS, UT_READ_CLASS_OTHER):
if (index == 1)
port = UHCI_PORTSC1;
else if (index == 2)
port = UHCI_PORTSC2;
else {
err = USBD_IOERROR;
goto ret;
}
if (len != 4) {
err = USBD_IOERROR;
goto ret;
}
x = UREAD2(sc, port);
status = change = 0;
if (x & UHCI_PORTSC_CCS )
status |= UPS_CURRENT_CONNECT_STATUS;
if (x & UHCI_PORTSC_CSC )
change |= UPS_C_CONNECT_STATUS;
if (x & UHCI_PORTSC_PE )
status |= UPS_PORT_ENABLED;
if (x & UHCI_PORTSC_POEDC)
change |= UPS_C_PORT_ENABLED;
if (x & UHCI_PORTSC_OCI )
status |= UPS_OVERCURRENT_INDICATOR;
if (x & UHCI_PORTSC_OCIC )
change |= UPS_C_OVERCURRENT_INDICATOR;
if (x & UHCI_PORTSC_SUSP )
status |= UPS_SUSPEND;
if (x & UHCI_PORTSC_LSDA )
status |= UPS_LOW_SPEED;
status |= UPS_PORT_POWER;
if (sc->sc_isreset)
change |= UPS_C_PORT_RESET;
USETW(ps.wPortStatus, status);
USETW(ps.wPortChange, change);
l = min(len, sizeof ps);
memcpy(buf, &ps, l);
totlen = l;
break;
case C(UR_SET_DESCRIPTOR, UT_WRITE_CLASS_DEVICE):
err = USBD_IOERROR;
goto ret;
case C(UR_SET_FEATURE, UT_WRITE_CLASS_DEVICE):
break;
case C(UR_SET_FEATURE, UT_WRITE_CLASS_OTHER):
if (index == 1)
port = UHCI_PORTSC1;
else if (index == 2)
port = UHCI_PORTSC2;
else {
err = USBD_IOERROR;
goto ret;
}
switch(value) {
case UHF_PORT_ENABLE:
x = UREAD2(sc, port);
UWRITE2(sc, port, x | UHCI_PORTSC_PE);
break;
case UHF_PORT_SUSPEND:
x = UREAD2(sc, port);
UWRITE2(sc, port, x | UHCI_PORTSC_SUSP);
break;
case UHF_PORT_RESET:
x = UREAD2(sc, port);
UWRITE2(sc, port, x | UHCI_PORTSC_PR);
usb_delay_ms(&sc->sc_bus, 10);
UWRITE2(sc, port, x & ~UHCI_PORTSC_PR);
delay(100);
x = UREAD2(sc, port);
UWRITE2(sc, port, x | UHCI_PORTSC_PE);
delay(100);
DPRINTFN(3,("uhci port %d reset, status = 0x%04x\n",
index, UREAD2(sc, port)));
sc->sc_isreset = 1;
break;
case UHF_C_PORT_CONNECTION:
case UHF_C_PORT_ENABLE:
case UHF_C_PORT_OVER_CURRENT:
case UHF_PORT_CONNECTION:
case UHF_PORT_OVER_CURRENT:
case UHF_PORT_POWER:
case UHF_PORT_LOW_SPEED:
case UHF_C_PORT_SUSPEND:
case UHF_C_PORT_RESET:
default:
err = USBD_IOERROR;
goto ret;
}
break;
default:
err = USBD_IOERROR;
goto ret;
}
xfer->actlen = totlen;
err = USBD_NORMAL_COMPLETION;
ret:
xfer->status = err;
xfer->hcpriv = 0;
s = splusb();
usb_transfer_complete(xfer);
splx(s);
return (USBD_IN_PROGRESS);
}
/* Abort a root control request. */
void
uhci_root_ctrl_abort(xfer)
usbd_xfer_handle xfer;
{
/* Nothing to do, all transfers are syncronous. */
}
/* Close the root pipe. */
void
uhci_root_ctrl_close(pipe)
usbd_pipe_handle pipe;
{
uhci_softc_t *sc = (uhci_softc_t *)pipe->device->bus;
sc->sc_has_timo = 0;
DPRINTF(("uhci_root_ctrl_close\n"));
}
/* Abort a root interrupt request. */
void
uhci_root_intr_abort(xfer)
usbd_xfer_handle xfer;
{
uhci_softc_t *sc = (uhci_softc_t *)xfer->pipe->device->bus;
usb_untimeout(uhci_timo, xfer, xfer->timo_handle);
sc->sc_has_timo = 0;
if (xfer->pipe->intrxfer == xfer) {
DPRINTF(("uhci_root_intr_abort: remove\n"));
xfer->pipe->intrxfer = 0;
}
xfer->status = USBD_CANCELLED;
usb_transfer_complete(xfer);
}
usbd_status
uhci_root_intr_transfer(xfer)
usbd_xfer_handle xfer;
{
usbd_status err;
/* Insert last in queue. */
err = usb_insert_transfer(xfer);
if (err)
return (err);
/* Pipe isn't running (otherwise err would be USBD_INPROG),
* start first
*/
return (uhci_root_intr_start(SIMPLEQ_FIRST(&xfer->pipe->queue)));
}
/* Start a transfer on the root interrupt pipe */
usbd_status
uhci_root_intr_start(xfer)
usbd_xfer_handle xfer;
{
usbd_pipe_handle pipe = xfer->pipe;
uhci_softc_t *sc = (uhci_softc_t *)pipe->device->bus;
DPRINTFN(3, ("uhci_root_intr_transfer: xfer=%p len=%d flags=%d\n",
xfer, xfer->length, xfer->flags));
sc->sc_ival = MS_TO_TICKS(xfer->pipe->endpoint->edesc->bInterval);
usb_timeout(uhci_timo, xfer, sc->sc_ival, xfer->timo_handle);
sc->sc_has_timo = xfer;
return (USBD_IN_PROGRESS);
}
/* Close the root interrupt pipe. */
void
uhci_root_intr_close(pipe)
usbd_pipe_handle pipe;
{
uhci_softc_t *sc = (uhci_softc_t *)pipe->device->bus;
usb_untimeout(uhci_timo, pipe->intrxfer, pipe->intrxfer->timo_handle);
sc->sc_has_timo = 0;
DPRINTF(("uhci_root_intr_close\n"));
}
Reference in New Issue View Git Blame Copy Permalink