freebsd-skq/usr.sbin/pmccontrol/pmccontrol.c
Joseph Koshy c5153e190b Add convenience APIs pmc_width() and pmc_capabilities() to -lpmc.
Have pmcstat(8) and pmccontrol(8) use these APIs.

Return PMC class-related constants (PMC widths and capabilities)
with the OP GETCPUINFO call leaving OP PMCINFO to return only the
dynamic information associated with a PMC (i.e., whether enabled,
owner pid, reload count etc.).

Allow pmc_read() (i.e., OPS PMCRW) on active self-attached PMCs to
get upto-date values from hardware since we can guarantee that the
hardware is running the correct PMC at the time of the call.

Bug fixes:
 - (x86 class processors) Fix a bug that prevented an RDPMC
   instruction from being recognized as permitted till after the
   attached process had context switched out and back in again after
   a pmc_start() call.

   Tighten the rules for using RDPMC class instructions: a GETMSR
   OP is now allowed only after an OP ATTACH has been done by the
   PMC's owner to itself.  OP GETMSR is not allowed for PMCs that
   track descendants, for PMCs attached to processes other than
   their owner processes.

 - (P4/HTT processors only) Fix a bug that caused the MI and MD
   layers to get out of sync.  Add a new MD operation 'get_config()'
   as part of this fix.

 - Allow multiple system-mode PMCs at the same row-index but on
   different CPUs to be allocated.

 - Reject allocation of an administratively disabled PMC.

Misc. code cleanups and refactoring.  Improve a few comments.
2005-05-01 14:11:49 +00:00

477 lines
10 KiB
C

/*-
* Copyright (c) 2003,2004 Joseph Koshy
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/types.h>
#include <sys/queue.h>
#include <sys/sysctl.h>
#include <assert.h>
#include <err.h>
#include <errno.h>
#include <fcntl.h>
#include <limits.h>
#include <pmc.h>
#include <stdarg.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sysexits.h>
#include <unistd.h>
/* Compile time defaults */
#define PMCC_PRINT_USAGE 0
#define PMCC_PRINT_EVENTS 1
#define PMCC_LIST_STATE 2
#define PMCC_ENABLE_DISABLE 3
#define PMCC_SHOW_STATISTICS 4
#define PMCC_CPU_ALL -1
#define PMCC_CPU_WILDCARD '*'
#define PMCC_PMC_ALL -1
#define PMCC_PMC_WILDCARD '*'
#define PMCC_OP_IGNORE 0
#define PMCC_OP_DISABLE 1
#define PMCC_OP_ENABLE 2
#define PMCC_PROGRAM_NAME "pmccontrol"
STAILQ_HEAD(pmcc_op_list, pmcc_op) head = STAILQ_HEAD_INITIALIZER(head);
struct pmcc_op {
char op_cpu;
char op_pmc;
char op_op;
STAILQ_ENTRY(pmcc_op) op_next;
};
/* Function Prototypes */
#if DEBUG
static void pmcc_init_debug(void);
#endif
static int pmcc_do_list_state(void);
static int pmcc_do_enable_disable(struct pmcc_op_list *);
static int pmcc_do_list_events(void);
/* Globals */
static char usage_message[] =
"Usage:\n"
" " PMCC_PROGRAM_NAME " -l\n"
" " PMCC_PROGRAM_NAME " -s\n"
" " PMCC_PROGRAM_NAME " [-e pmc | -d pmc | -c cpu] ...";
#if DEBUG
FILE *debug_stream = NULL;
#endif
#if DEBUG
#define DEBUG_MSG(...) \
(void) fprintf(debug_stream, "[pmccontrol] " __VA_ARGS__);
#else
#define DEBUG_MSG(m) /* */
#endif /* !DEBUG */
int pmc_syscall = -1;
#define PMC_CALL(cmd, params) \
if ((error = syscall(pmc_syscall, PMC_OP_##cmd, (params))) != 0) \
{ \
DEBUG_MSG("ERROR: syscall [" #cmd "]"); \
exit(EX_OSERR); \
}
#if DEBUG
/* log debug messages to a separate file */
static void
pmcc_init_debug(void)
{
char *fn;
fn = getenv("PMCCONTROL_DEBUG");
if (fn != NULL)
{
debug_stream = fopen(fn, "w");
if (debug_stream == NULL)
debug_stream = stderr;
} else
debug_stream = stderr;
}
#endif
static int
pmcc_do_enable_disable(struct pmcc_op_list *op_list)
{
unsigned char op;
int c, error, i, j, ncpu, npmc, t;
int cpu, pmc;
struct pmcc_op *np;
unsigned char *map;
if ((ncpu = pmc_ncpu()) < 0)
err(EX_OSERR, "Unable to determine the number of cpus");
/* determine the maximum number of PMCs in any CPU */
npmc = 0;
for (c = 0; c < ncpu; c++) {
if ((t = pmc_npmc(c)) < 0)
err(EX_OSERR, "Unable to determine the number of PMCs in "
"CPU %d", c);
npmc = t > npmc ? t : npmc;
}
if (npmc == 0)
errx(EX_CONFIG, "No PMCs found");
if ((map = malloc(npmc * ncpu)) == NULL)
err(EX_SOFTWARE, "Out of memory");
(void) memset(map, PMCC_OP_IGNORE, npmc*ncpu);
error = 0;
STAILQ_FOREACH(np, op_list, op_next) {
cpu = np->op_cpu;
pmc = np->op_pmc;
op = np->op_op;
if (cpu >= ncpu)
errx(EX_DATAERR, "CPU id too large: \"%d\"", cpu);
if (pmc >= npmc)
errx(EX_DATAERR, "PMC id too large: \"%d\"", pmc);
#define MARKMAP(M,C,P,V) do { \
*((M) + (C)*npmc + (P)) = (V); \
} while (0)
#define SET_PMCS(C,P,V) do { \
if ((P) == PMCC_PMC_ALL) { \
for (j = 0; j < npmc; j++) \
MARKMAP(map, (C), j, (V)); \
} else \
MARKMAP(map, (C), (P), (V)); \
} while (0)
#define MAP(M,C,P) (*((M) + (C)*npmc + (P)))
if (cpu == PMCC_CPU_ALL)
for (i = 0; i < ncpu; i++)
SET_PMCS(i, pmc, op);
else
SET_PMCS(cpu, pmc, op);
}
/* Configure PMCS */
for (i = 0; i < ncpu; i++)
for (j = 0; j < npmc; j++) {
unsigned char b;
b = MAP(map, i, j);
error = 0;
if (b == PMCC_OP_ENABLE)
error = pmc_enable(i, j);
else if (b == PMCC_OP_DISABLE)
error = pmc_disable(i, j);
if (error < 0)
err(EX_OSERR, "%s of PMC %d on CPU %d failed",
b == PMCC_OP_ENABLE ? "Enable" :
"Disable", j, i);
}
return error;
}
static int
pmcc_do_list_state(void)
{
size_t dummy;
int c, cpu, n, npmc, ncpu;
unsigned int logical_cpus_mask;
struct pmc_info *pd;
struct pmc_op_getpmcinfo *pi;
const struct pmc_op_getcpuinfo *pc;
if (pmc_cpuinfo(&pc) != 0)
err(EX_OSERR, "Unable to determine CPU information");
dummy = sizeof(logical_cpus_mask);
if (sysctlbyname("machdep.logical_cpus_mask", &logical_cpus_mask,
&dummy, NULL, 0) < 0)
logical_cpus_mask = 0;
ncpu = pc->pm_ncpu;
for (c = cpu = 0; cpu < ncpu; cpu++) {
#if i386
if (pc->pm_cputype == PMC_CPU_INTEL_PIV &&
(logical_cpus_mask & (1 << cpu)))
continue; /* skip P4-style 'logical' cpus */
#endif
if (pmc_pmcinfo(cpu, &pi) < 0)
err(EX_OSERR, "Unable to get PMC status for CPU %d",
cpu);
printf("#CPU %d:\n", c++);
npmc = pmc_npmc(cpu);
printf("#N NAME CLASS STATE ROW-DISP\n");
for (n = 0; n < npmc; n++) {
pd = &pi->pm_pmcs[n];
printf(" %-2d %-16s %-6s %-8s %-10s",
n,
pd->pm_name,
pmc_name_of_class(pd->pm_class),
pd->pm_enabled ? "ENABLED" : "DISABLED",
pmc_name_of_disposition(pd->pm_rowdisp));
if (pd->pm_ownerpid != -1) {
printf(" (pid %d)", pd->pm_ownerpid);
printf(" %-32s",
pmc_name_of_event(pd->pm_event));
if (PMC_IS_SAMPLING_MODE(pd->pm_mode))
printf(" (reload count %jd)",
pd->pm_reloadcount);
}
printf("\n");
}
free(pi);
}
return 0;
}
static int
pmcc_do_list_events(void)
{
enum pmc_class c;
unsigned int i, j, nevents;
const char **eventnamelist;
const struct pmc_op_getcpuinfo *ci;
if (pmc_cpuinfo(&ci) != 0)
err(EX_OSERR, "Unable to determine CPU information");
eventnamelist = NULL;
for (i = 0; i < ci->pm_nclass; i++) {
c = ci->pm_classes[i].pm_class;
printf("%s\n", pmc_name_of_class(c));
if (pmc_event_names_of_class(c, &eventnamelist, &nevents) < 0)
err(EX_OSERR, "ERROR: Cannot find information for "
"event class \"%s\"", pmc_name_of_class(c));
for (j = 0; j < nevents; j++)
printf("\t%s\n", eventnamelist[j]);
free(eventnamelist);
}
return 0;
}
static int
pmcc_show_statistics(void)
{
struct pmc_op_getdriverstats gms;
if (pmc_get_driver_stats(&gms) < 0)
err(EX_OSERR, "ERROR: cannot retrieve driver statistics");
/*
* Print statistics.
*/
#define PRINT(N,V) (void) printf("%20s %d\n", (N), gms.pm_##V)
PRINT("interrupts-processed", intr_processed);
PRINT("interrupts-ignored", intr_ignored);
PRINT("system-calls", syscalls);
PRINT("system-calls-with-errors", syscall_errors);
return 0;
}
/*
* Main
*/
int
main(int argc, char **argv)
{
int error, command, currentcpu, option, pmc;
char *dummy;
struct pmcc_op *p;
#if DEBUG
pmcc_init_debug();
#endif
/* parse args */
currentcpu = PMCC_CPU_ALL;
command = PMCC_PRINT_USAGE;
error = 0;
STAILQ_INIT(&head);
while ((option = getopt(argc, argv, ":c:d:e:lLs")) != -1)
switch (option) {
case 'L':
if (command != PMCC_PRINT_USAGE) {
error = 1;
break;
}
command = PMCC_PRINT_EVENTS;
break;
case 'c':
if (command != PMCC_PRINT_USAGE &&
command != PMCC_ENABLE_DISABLE) {
error = 1;
break;
}
command = PMCC_ENABLE_DISABLE;
if (*optarg == PMCC_CPU_WILDCARD)
currentcpu = PMCC_CPU_ALL;
else {
currentcpu = strtoul(optarg, &dummy, 0);
if (*dummy != '\0' || currentcpu < 0)
errx(EX_DATAERR,
"\"%s\" is not a valid CPU id",
optarg);
}
break;
case 'd':
case 'e':
if (command != PMCC_PRINT_USAGE &&
command != PMCC_ENABLE_DISABLE) {
error = 1;
break;
}
command = PMCC_ENABLE_DISABLE;
if (*optarg == PMCC_PMC_WILDCARD)
pmc = PMCC_PMC_ALL;
else {
pmc = strtoul(optarg, &dummy, 0);
if (*dummy != '\0' || pmc < 0)
errx(EX_DATAERR,
"\"%s\" is not a valid PMC id",
optarg);
}
if ((p = malloc(sizeof(*p))) == NULL)
err(EX_SOFTWARE, "Out of memory");
p->op_cpu = currentcpu;
p->op_pmc = pmc;
p->op_op = option == 'd' ? PMCC_OP_DISABLE :
PMCC_OP_ENABLE;
STAILQ_INSERT_TAIL(&head, p, op_next);
break;
case 'l':
if (command != PMCC_PRINT_USAGE) {
error = 1;
break;
}
command = PMCC_LIST_STATE;
break;
case 's':
if (command != PMCC_PRINT_USAGE) {
error = 1;
break;
}
command = PMCC_SHOW_STATISTICS;
break;
case ':':
errx(EX_USAGE,
"Missing argument to option '-%c'", optopt);
break;
case '?':
warnx("Unrecognized option \"-%c\"", optopt);
errx(EX_USAGE, usage_message);
break;
default:
error = 1;
break;
}
if (command == PMCC_PRINT_USAGE)
(void) errx(EX_USAGE, usage_message);
if (error)
exit(EX_USAGE);
if (pmc_init() < 0)
err(EX_UNAVAILABLE,
"Initialization of the pmc(3) library failed");
switch (command) {
case PMCC_LIST_STATE:
error = pmcc_do_list_state();
break;
case PMCC_PRINT_EVENTS:
error = pmcc_do_list_events();
break;
case PMCC_SHOW_STATISTICS:
error = pmcc_show_statistics();
break;
case PMCC_ENABLE_DISABLE:
if (STAILQ_EMPTY(&head))
errx(EX_USAGE, "No PMCs specified to enable or disable");
error = pmcc_do_enable_disable(&head);
break;
default:
assert(0);
}
if (error != 0)
err(EX_OSERR, "Command failed");
exit(0);
}