Gleb Smirnoff f25a8a0150 Add uep(4), driver for USB onscreen touch panel from eGalax. ... The driver is stub. It just creates device entry and feeds reassembled packets from hardware into it. If in future we would port wsmouse(4) from NetBSD, or make sysmouse(4) to support absolute motion events, then the driver can be extended to act as system mouse. Meanwhile, it just presents a /dev/uep0, that can be utilized by X driver, that I am going to commit to ports tree soon. The name for the driver is chosen to be the same as in NetBSD, however, due to different USB stacks this driver isn't a port.		2010-05-25 21:20:56 +00:00
..
controller	Back out r203140 which was causing problems when the first and the last	2010-05-12 22:55:45 +00:00
input	Add uep(4), driver for USB onscreen touch panel from eGalax.	2010-05-25 21:20:56 +00:00
misc	Change USB_DEBUG to #ifdef and allow it to be turned off. Previously this had	2010-04-22 21:31:34 +00:00
net	Fix possibly wrong bit masking.	2010-05-12 23:00:36 +00:00
quirk	Add quirks for the Alcor SDCR_6362 Card Reader, Freecom HDD storage device and	2010-05-12 22:26:23 +00:00
serial	Add new FTDI USB device ID.	2010-05-12 22:58:59 +00:00
storage	Change USB_DEBUG to #ifdef and allow it to be turned off. Previously this had	2010-04-22 21:31:34 +00:00
template	isochronous endpoint descriptors should have two more bytes which are zero by	2010-03-11 21:48:10 +00:00
wlan	Sync run(4) driver from author's site.	2010-05-13 00:19:03 +00:00
ufm_ioctl.h
usb_bus.h	Add support for USB language selection.	2009-09-28 07:41:17 +00:00
usb_busdma.c	Remove overuse of exclamation marks in kernel printfs, there mere fact a	2009-11-26 00:43:17 +00:00
usb_busdma.h
usb_cdc.h	The NetBSD Foundation has granted permission to remove clause 3 and 4 from	2010-03-03 10:18:03 +00:00
usb_compat_linux.c	Use a more obvious prefix for the USB control (endpoint 0) transfers rather	2010-04-22 22:15:08 +00:00
usb_compat_linux.h	- Add usb_fill_bulk_urb() and usb_bulk_msg() linux compat functions [1]	2009-11-01 21:48:18 +00:00
usb_controller.h
usb_core.c
usb_core.h	Improve High Speed slot allocation mechanism by moving the computation to the	2009-11-22 21:16:43 +00:00
usb_debug.c	Provide tunables for some of the usb sysctls that affect boot behaviour.	2009-11-22 21:21:22 +00:00
usb_debug.h	Change USB_DEBUG to #ifdef and allow it to be turned off. Previously this had	2010-04-22 21:31:34 +00:00
usb_dev.c	Staticise usb_ref_device and usb_unref_device.	2010-05-12 22:28:40 +00:00
usb_dev.h
usb_device.c	If a USB device is suspended and a USB set config request is issued when the	2010-05-12 22:42:35 +00:00
usb_device.h	If a USB device is suspended and a USB set config request is issued when the	2010-05-12 22:42:35 +00:00
usb_dynamic.c	Use the EVENTHANDLER system to hook into the usb device configuration and	2009-12-17 21:42:10 +00:00
usb_dynamic.h	Use the EVENTHANDLER system to hook into the usb device configuration and	2009-12-17 21:42:10 +00:00
usb_endian.h
usb_error.c
usb_freebsd.h	Change USB_DEBUG to #ifdef and allow it to be turned off. Previously this had	2010-04-22 21:31:34 +00:00
usb_generic.c	If a USB device is suspended and a USB set config request is issued when the	2010-05-12 22:42:35 +00:00
usb_generic.h
usb_handle_request.c	- Patch to allow USB controller to resume operation after	2009-08-24 05:05:38 +00:00
usb_hid.c	Support getting signed and unsigned HID data.	2010-05-12 22:50:23 +00:00
usb_hub.c	Provide more information about the device location in the USB system.	2010-05-12 22:44:57 +00:00
usb_hub.h	Improve High Speed slot allocation mechanism by moving the computation to the	2009-11-22 21:16:43 +00:00
usb_if.m
usb_ioctl.h
usb_lookup.c
usb_mbuf.c
usb_mbuf.h
usb_msctest.c	Add support for the E1752 3G modem and the required eject command.	2010-02-14 20:05:12 +00:00
usb_msctest.h	Add support for the E1752 3G modem and the required eject command.	2010-02-14 20:05:12 +00:00
usb_parse.c
usb_pci.h
usb_process.c	Remove overuse of exclamation marks in kernel printfs, there mere fact a	2009-11-26 00:43:17 +00:00
usb_process.h	- Patch to allow USB controller to resume operation after	2009-08-24 05:05:38 +00:00
usb_request.c	Reduce diffs to p4.	2010-05-12 23:40:44 +00:00
usb_request.h
usb_transfer.c	Use a more obvious prefix for the USB control (endpoint 0) transfers rather	2010-04-22 22:15:08 +00:00
usb_transfer.h	Use a more obvious prefix for the USB control (endpoint 0) transfers rather	2010-04-22 22:15:08 +00:00
usb_util.c
usb_util.h
usb.h	Add basic support for USB Network Control Model (NCM) v1.0 to if_cdce.c.	2009-09-28 07:53:55 +00:00
usbdevs	Add uep(4), driver for USB onscreen touch panel from eGalax.	2010-05-25 21:20:56 +00:00
usbdi_util.h
usbdi.h	Use the EVENTHANDLER system to hook into the usb device configuration and	2009-12-17 21:42:10 +00:00
usbhid.h	Support getting signed and unsigned HID data.	2010-05-12 22:50:23 +00:00