freebsd-skq/sys/dev/usb
Andrew Thompson a4cadedb58 Add support for LOW speed BULK transfers. This mode is not recommended by the
USB 2.0 standard, though some USB devices use it anyway.

Submitted by:	Hans Petter Selasky
2010-06-22 20:57:48 +00:00
..
controller Add support for LOW speed BULK transfers. This mode is not recommended by the 2010-06-22 20:57:48 +00:00
input Add uep(4), driver for USB onscreen touch panel from eGalax. 2010-05-25 21:20:56 +00:00
misc Change USB_DEBUG to #ifdef and allow it to be turned off. Previously this had 2010-04-22 21:31:34 +00:00
net Fix possibly wrong bit masking. 2010-05-12 23:00:36 +00:00
quirk Add quirks for the Alcor SDCR_6362 Card Reader, Freecom HDD storage device and 2010-05-12 22:26:23 +00:00
serial Add new FTDI USB device ID. 2010-05-12 22:58:59 +00:00
storage Change USB_DEBUG to #ifdef and allow it to be turned off. Previously this had 2010-04-22 21:31:34 +00:00
template isochronous endpoint descriptors should have two more bytes which are zero by 2010-03-11 21:48:10 +00:00
wlan Fix typos that broke duration calculations on protection frames. A similar 2010-06-14 23:01:50 +00:00
ufm_ioctl.h
usb_bus.h Add support for USB language selection. 2009-09-28 07:41:17 +00:00
usb_busdma.c Remove overuse of exclamation marks in kernel printfs, there mere fact a 2009-11-26 00:43:17 +00:00
usb_busdma.h
usb_cdc.h The NetBSD Foundation has granted permission to remove clause 3 and 4 from 2010-03-03 10:18:03 +00:00
usb_compat_linux.c Use a more obvious prefix for the USB control (endpoint 0) transfers rather 2010-04-22 22:15:08 +00:00
usb_compat_linux.h - Add usb_fill_bulk_urb() and usb_bulk_msg() linux compat functions [1] 2009-11-01 21:48:18 +00:00
usb_controller.h
usb_core.c
usb_core.h Improve High Speed slot allocation mechanism by moving the computation to the 2009-11-22 21:16:43 +00:00
usb_debug.c Provide tunables for some of the usb sysctls that affect boot behaviour. 2009-11-22 21:21:22 +00:00
usb_debug.h Change USB_DEBUG to #ifdef and allow it to be turned off. Previously this had 2010-04-22 21:31:34 +00:00
usb_dev.c fix a few cases where a string is passed via format argument instead of 2010-06-11 19:27:21 +00:00
usb_dev.h
usb_device.c fix a few cases where a string is passed via format argument instead of 2010-06-11 19:27:21 +00:00
usb_device.h If a USB device is suspended and a USB set config request is issued when the 2010-05-12 22:42:35 +00:00
usb_dynamic.c Use the EVENTHANDLER system to hook into the usb device configuration and 2009-12-17 21:42:10 +00:00
usb_dynamic.h Use the EVENTHANDLER system to hook into the usb device configuration and 2009-12-17 21:42:10 +00:00
usb_endian.h
usb_error.c
usb_freebsd.h Change USB_DEBUG to #ifdef and allow it to be turned off. Previously this had 2010-04-22 21:31:34 +00:00
usb_generic.c If a USB device is suspended and a USB set config request is issued when the 2010-05-12 22:42:35 +00:00
usb_generic.h
usb_handle_request.c
usb_hid.c Support getting signed and unsigned HID data. 2010-05-12 22:50:23 +00:00
usb_hub.c Provide more information about the device location in the USB system. 2010-05-12 22:44:57 +00:00
usb_hub.h Improve High Speed slot allocation mechanism by moving the computation to the 2009-11-22 21:16:43 +00:00
usb_if.m
usb_ioctl.h
usb_lookup.c
usb_mbuf.c
usb_mbuf.h
usb_msctest.c Add support for the E1752 3G modem and the required eject command. 2010-02-14 20:05:12 +00:00
usb_msctest.h Add support for the E1752 3G modem and the required eject command. 2010-02-14 20:05:12 +00:00
usb_parse.c
usb_pci.h
usb_process.c fix a few cases where a string is passed via format argument instead of 2010-06-11 19:27:21 +00:00
usb_process.h
usb_request.c Reduce diffs to p4. 2010-05-12 23:40:44 +00:00
usb_request.h
usb_transfer.c Add support for LOW speed BULK transfers. This mode is not recommended by the 2010-06-22 20:57:48 +00:00
usb_transfer.h Use a more obvious prefix for the USB control (endpoint 0) transfers rather 2010-04-22 22:15:08 +00:00
usb_util.c
usb_util.h
usb.h Add basic support for USB Network Control Model (NCM) v1.0 to if_cdce.c. 2009-09-28 07:53:55 +00:00
usbdevs Add uep(4), driver for USB onscreen touch panel from eGalax. 2010-05-25 21:20:56 +00:00
usbdi_util.h
usbdi.h Use the EVENTHANDLER system to hook into the usb device configuration and 2009-12-17 21:42:10 +00:00
usbhid.h Support getting signed and unsigned HID data. 2010-05-12 22:50:23 +00:00