freebsd-skq/sys/cam/scsi/scsi_pt.c
Justin T. Gibbs 76babe507b SCSI Peripheral drivers for CAM:
da	- Direct Access Devices (disks, optical devices, SS disks)
	cd	- CDROM (or devices that can act like them, WORM, CD-RW, etc)
	ch	- Medium Changer devices.
	sa	- Sequential Access Devices (tape drives)
	pass	- Application pass-thru driver
	targ	- Target Mode "Processor Target" Emulator
	pt	- Processor Target Devices (scanners, cpus, etc.)

Submitted by:	The CAM Team
1998-09-15 06:36:34 +00:00

724 lines
17 KiB
C

/*
* Implementation of SCSI Processor Target Peripheral driver for CAM.
*
* Copyright (c) 1998 Justin T. Gibbs.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $Id$
*/
#include <sys/param.h>
#include <sys/queue.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/types.h>
#include <sys/buf.h>
#include <sys/devicestat.h>
#include <sys/malloc.h>
#include <sys/conf.h>
#include <cam/cam.h>
#include <cam/cam_ccb.h>
#include <cam/cam_extend.h>
#include <cam/cam_periph.h>
#include <cam/cam_xpt_periph.h>
#include <cam/cam_debug.h>
#include <cam/scsi/scsi_all.h>
#include <cam/scsi/scsi_message.h>
#include <cam/scsi/scsi_pt.h>
typedef enum {
PT_STATE_PROBE,
PT_STATE_NORMAL
} pt_state;
typedef enum {
PT_FLAG_NONE = 0x00,
PT_FLAG_OPEN = 0x01,
PT_FLAG_DEVICE_INVALID = 0x02,
PT_FLAG_RETRY_UA = 0x04
} pt_flags;
typedef enum {
PT_CCB_BUFFER_IO = 0x01,
PT_CCB_WAITING = 0x02,
PT_CCB_RETRY_UA = 0x04,
PT_CCB_BUFFER_IO_UA = PT_CCB_BUFFER_IO|PT_CCB_RETRY_UA
} pt_ccb_state;
/* Offsets into our private area for storing information */
#define ccb_state ppriv_field0
#define ccb_bp ppriv_ptr1
struct pt_softc {
struct buf_queue_head buf_queue;
struct devstat device_stats;
LIST_HEAD(, ccb_hdr) pending_ccbs;
pt_state state;
pt_flags flags;
union ccb saved_ccb;
};
static d_open_t ptopen;
static d_read_t ptread;
static d_write_t ptwrite;
static d_close_t ptclose;
static d_strategy_t ptstrategy;
static periph_init_t ptinit;
static void ptasync(void *callback_arg, u_int32_t code,
struct cam_path *path, void *arg);
static periph_ctor_t ptctor;
static periph_dtor_t ptdtor;
static periph_start_t ptstart;
static void ptdone(struct cam_periph *periph,
union ccb *done_ccb);
static int pterror(union ccb *ccb, u_int32_t cam_flags,
u_int32_t sense_flags);
void scsi_send_receive(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
u_int tag_action, int readop, u_int byte2,
u_int32_t xfer_len, u_int8_t *data_ptr,
u_int8_t sense_len, u_int32_t timeout);
static struct periph_driver ptdriver =
{
ptinit, "pt",
TAILQ_HEAD_INITIALIZER(ptdriver.units), /* generation */ 0
};
DATA_SET(periphdriver_set, ptdriver);
#define PT_CDEV_MAJOR 61
static struct cdevsw pt_cdevsw =
{
/*d_open*/ ptopen,
/*d_close*/ ptclose,
/*d_read*/ ptread,
/*d_write*/ ptwrite,
/*d_ioctl*/ noioctl,
/*d_stop*/ nostop,
/*d_reset*/ noreset,
/*d_devtotty*/ nodevtotty,
/*d_poll*/ seltrue,
/*d_mmap*/ nommap,
/*d_strategy*/ ptstrategy,
/*d_name*/ "pt",
/*d_spare*/ NULL,
/*d_maj*/ -1,
/*d_dump*/ nodump,
/*d_psize*/ nopsize,
/*d_flags*/ 0,
/*d_maxio*/ 0,
/*b_maj*/ -1
};
static struct extend_array *ptperiphs;
static int
ptopen(dev_t dev, int flags, int fmt, struct proc *p)
{
struct cam_periph *periph;
struct pt_softc *softc;
int unit;
int error;
unit = minor(dev);
periph = cam_extend_get(ptperiphs, unit);
if (periph == NULL)
return (ENXIO);
softc = (struct pt_softc *)periph->softc;
CAM_DEBUG(periph->path, CAM_DEBUG_TRACE,
("ptopen: dev=0x%x (unit %d)\n", dev, unit));
if ((error = cam_periph_lock(periph, PRIBIO|PCATCH)) != 0)
return (error); /* error code from tsleep */
if ((softc->flags & PT_FLAG_OPEN) == 0) {
if (cam_periph_acquire(periph) != CAM_REQ_CMP)
error = ENXIO;
else
softc->flags |= PT_FLAG_OPEN;
} else
error = EBUSY;
cam_periph_unlock(periph);
return (error);
}
static int
ptclose(dev_t dev, int flag, int fmt, struct proc *p)
{
struct cam_periph *periph;
struct pt_softc *softc;
union ccb *ccb;
int unit;
int error;
unit = minor(dev);
periph = cam_extend_get(ptperiphs, unit);
if (periph == NULL)
return (ENXIO);
softc = (struct pt_softc *)periph->softc;
if ((error = cam_periph_lock(periph, PRIBIO)) != 0)
return (error); /* error code from tsleep */
softc->flags &= ~PT_FLAG_OPEN;
cam_periph_unlock(periph);
cam_periph_release(periph);
return (0);
}
static int
ptread(dev_t dev, struct uio *uio, int ioflag)
{
return(physio(ptstrategy, NULL, dev, 1, minphys, uio));
}
static int
ptwrite(dev_t dev, struct uio *uio, int ioflag)
{
return(physio(ptstrategy, NULL, dev, 0, minphys, uio));
}
/*
* Actually translate the requested transfer into one the physical driver
* can understand. The transfer is described by a buf and will include
* only one physical transfer.
*/
static void
ptstrategy(struct buf *bp)
{
struct cam_periph *periph;
struct pt_softc *softc;
u_int unit;
int s;
unit = minor(bp->b_dev);
periph = cam_extend_get(ptperiphs, unit);
if (periph == NULL) {
bp->b_error = ENXIO;
goto bad;
}
softc = (struct pt_softc *)periph->softc;
/*
* Mask interrupts so that the pack cannot be invalidated until
* after we are in the queue. Otherwise, we might not properly
* clean up one of the buffers.
*/
s = splbio();
/*
* If the device has been made invalid, error out
*/
if ((softc->flags & PT_FLAG_DEVICE_INVALID)) {
splx(s);
bp->b_error = ENXIO;
goto bad;
}
/*
* Place it in the queue of disk activities for this disk
*/
bufq_insert_tail(&softc->buf_queue, bp);
splx(s);
/*
* Schedule ourselves for performing the work.
*/
xpt_schedule(periph, /* XXX priority */1);
return;
bad:
bp->b_flags |= B_ERROR;
/*
* Correctly set the buf to indicate a completed xfer
*/
bp->b_resid = bp->b_bcount;
biodone(bp);
}
static void
ptinit(void)
{
cam_status status;
struct cam_path *path;
/*
* Create our extend array for storing the devices we attach to.
*/
ptperiphs = cam_extend_new();
if (ptperiphs == NULL) {
printf("pt: Failed to alloc extend array!\n");
return;
}
/*
* Install a global async callback. This callback will
* receive async callbacks like "new device found".
*/
status = xpt_create_path(&path, /*periph*/NULL, CAM_XPT_PATH_ID,
CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD);
if (status == CAM_REQ_CMP) {
struct ccb_setasync csa;
xpt_setup_ccb(&csa.ccb_h, path, /*priority*/5);
csa.ccb_h.func_code = XPT_SASYNC_CB;
csa.event_enable = AC_FOUND_DEVICE;
csa.callback = ptasync;
csa.callback_arg = NULL;
xpt_action((union ccb *)&csa);
status = csa.ccb_h.status;
xpt_free_path(path);
}
if (status != CAM_REQ_CMP) {
printf("pt: Failed to attach master async callback "
"due to status 0x%x!\n", status);
} else {
/* If we were successfull, register our devsw */
dev_t dev;
dev = makedev(PT_CDEV_MAJOR, 0);
cdevsw_add(&dev,&pt_cdevsw, NULL);
}
}
static cam_status
ptctor(struct cam_periph *periph, void *arg)
{
int s;
struct pt_softc *softc;
struct ccb_setasync csa;
struct ccb_getdev *cgd;
cgd = (struct ccb_getdev *)arg;
if (periph == NULL) {
printf("ptregister: periph was NULL!!\n");
return(CAM_REQ_CMP_ERR);
}
if (cgd == NULL) {
printf("ptregister: no getdev CCB, can't register device\n");
return(CAM_REQ_CMP_ERR);
}
softc = (struct pt_softc *)malloc(sizeof(*softc),M_DEVBUF,M_NOWAIT);
if (softc == NULL) {
printf("daregister: Unable to probe new device. "
"Unable to allocate softc\n");
return(CAM_REQ_CMP_ERR);
}
bzero(softc, sizeof(*softc));
LIST_INIT(&softc->pending_ccbs);
softc->state = PT_STATE_NORMAL;
bufq_init(&softc->buf_queue);
periph->softc = softc;
cam_extend_set(ptperiphs, periph->unit_number, periph);
/*
* The DA driver supports a blocksize, but
* we don't know the blocksize until we do
* a read capacity. So, set a flag to
* indicate that the blocksize is
* unavailable right now. We'll clear the
* flag as soon as we've done a read capacity.
*/
devstat_add_entry(&softc->device_stats, "pt",
periph->unit_number, 0,
DEVSTAT_NO_BLOCKSIZE,
cgd->pd_type | DEVSTAT_TYPE_IF_SCSI);
/*
* Add async callbacks for bus reset and
* bus device reset calls. I don't bother
* checking if this fails as, in most cases,
* the system will function just fine without
* them and the only alternative would be to
* not attach the device on failure.
*/
xpt_setup_ccb(&csa.ccb_h, periph->path, /*priority*/5);
csa.ccb_h.func_code = XPT_SASYNC_CB;
csa.event_enable = AC_SENT_BDR | AC_BUS_RESET | AC_LOST_DEVICE;
csa.callback = ptasync;
csa.callback_arg = periph;
xpt_action((union ccb *)&csa);
/* Tell the user we've attached to the device */
xpt_announce_periph(periph, NULL);
return(CAM_REQ_CMP);
}
static void
ptdtor(struct cam_periph *periph)
{
cam_extend_release(ptperiphs, periph->unit_number);
xpt_print_path(periph->path);
printf("removing device entry\n");
free(periph->softc, M_DEVBUF);
}
static void
ptasync(void *callback_arg, u_int32_t code, struct cam_path *path, void *arg)
{
struct cam_periph *periph;
periph = (struct cam_periph *)callback_arg;
switch (code) {
case AC_FOUND_DEVICE:
{
struct ccb_getdev *cgd;
cam_status status;
cgd = (struct ccb_getdev *)arg;
if (cgd->pd_type != T_PROCESSOR)
break;
/*
* Allocate a peripheral instance for
* this device and start the probe
* process.
*/
status = cam_periph_alloc(ptctor, ptdtor, ptstart,
"pt", CAM_PERIPH_BIO, cgd->ccb_h.path,
ptasync, AC_FOUND_DEVICE, cgd);
if (status != CAM_REQ_CMP
&& status != CAM_REQ_INPROG)
printf("ptasync: Unable to attach to new device "
"due to status 0x%x\n", status);
break;
}
case AC_LOST_DEVICE:
{
int s;
struct pt_softc *softc;
struct buf *q_bp;
struct ccb_setasync csa;
softc = (struct pt_softc *)periph->softc;
/*
* Insure that no other async callbacks that
* might affect this peripheral can come through.
*/
s = splcam();
/*
* De-register any async callbacks.
*/
xpt_setup_ccb(&csa.ccb_h, periph->path,
/* priority */ 5);
csa.ccb_h.func_code = XPT_SASYNC_CB;
csa.event_enable = 0;
csa.callback = ptasync;
csa.callback_arg = periph;
xpt_action((union ccb *)&csa);
softc->flags |= PT_FLAG_DEVICE_INVALID;
/*
* Return all queued I/O with ENXIO.
* XXX Handle any transactions queued to the card
* with XPT_ABORT_CCB.
*/
while ((q_bp = bufq_first(&softc->buf_queue)) != NULL){
bufq_remove(&softc->buf_queue, q_bp);
q_bp->b_resid = q_bp->b_bcount;
q_bp->b_error = ENXIO;
q_bp->b_flags |= B_ERROR;
biodone(q_bp);
}
devstat_remove_entry(&softc->device_stats);
xpt_print_path(periph->path);
printf("lost device\n");
splx(s);
cam_periph_invalidate(periph);
break;
}
case AC_SENT_BDR:
case AC_BUS_RESET:
{
struct pt_softc *softc;
struct ccb_hdr *ccbh;
int s;
softc = (struct pt_softc *)periph->softc;
s = splsoftcam();
/*
* Don't fail on the expected unit attention
* that will occur.
*/
softc->flags |= PT_FLAG_RETRY_UA;
for (ccbh = LIST_FIRST(&softc->pending_ccbs);
ccbh != NULL; ccbh = LIST_NEXT(ccbh, periph_links.le))
ccbh->ccb_state |= PT_CCB_RETRY_UA;
splx(s);
break;
}
case AC_TRANSFER_NEG:
case AC_SCSI_AEN:
case AC_UNSOL_RESEL:
default:
break;
}
}
static void
ptstart(struct cam_periph *periph, union ccb *start_ccb)
{
struct pt_softc *softc;
struct buf *bp;
int s;
softc = (struct pt_softc *)periph->softc;
/*
* See if there is a buf with work for us to do..
*/
s = splbio();
bp = bufq_first(&softc->buf_queue);
if (periph->immediate_priority <= periph->pinfo.priority) {
CAM_DEBUG_PRINT(CAM_DEBUG_SUBTRACE,
("queuing for immediate ccb\n"));
start_ccb->ccb_h.ccb_state = PT_CCB_WAITING;
SLIST_INSERT_HEAD(&periph->ccb_list, &start_ccb->ccb_h,
periph_links.sle);
periph->immediate_priority = CAM_PRIORITY_NONE;
splx(s);
wakeup(&periph->ccb_list);
} else if (bp == NULL) {
splx(s);
xpt_release_ccb(start_ccb);
} else {
int oldspl;
bufq_remove(&softc->buf_queue, bp);
devstat_start_transaction(&softc->device_stats);
scsi_send_receive(&start_ccb->csio,
/*retries*/4,
ptdone,
MSG_SIMPLE_Q_TAG,
bp->b_flags & B_READ,
/*byte2*/0,
bp->b_bcount,
bp->b_data,
/*sense_len*/SSD_FULL_SIZE,
/*timeout*/10000);
start_ccb->ccb_h.ccb_state = PT_CCB_BUFFER_IO;
/*
* Block out any asyncronous callbacks
* while we touch the pending ccb list.
*/
oldspl = splcam();
LIST_INSERT_HEAD(&softc->pending_ccbs, &start_ccb->ccb_h,
periph_links.le);
splx(oldspl);
start_ccb->ccb_h.ccb_bp = bp;
bp = bufq_first(&softc->buf_queue);
splx(s);
xpt_action(start_ccb);
if (bp != NULL) {
/* Have more work to do, so ensure we stay scheduled */
xpt_schedule(periph, /* XXX priority */1);
}
}
}
static void
ptdone(struct cam_periph *periph, union ccb *done_ccb)
{
struct pt_softc *softc;
struct ccb_scsiio *csio;
softc = (struct pt_softc *)periph->softc;
csio = &done_ccb->csio;
switch (csio->ccb_h.ccb_state) {
case PT_CCB_BUFFER_IO:
case PT_CCB_BUFFER_IO_UA:
{
struct buf *bp;
int oldspl;
bp = (struct buf *)done_ccb->ccb_h.ccb_bp;
if ((done_ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) {
int error;
int s;
int sf;
if ((csio->ccb_h.ccb_state & PT_CCB_RETRY_UA) != 0)
sf = SF_RETRY_UA;
else
sf = 0;
if ((error = pterror(done_ccb, 0, sf)) == ERESTART) {
/*
* A retry was scheuled, so
* just return.
*/
return;
}
if (error != 0) {
struct buf *q_bp;
s = splbio();
if (error == ENXIO) {
/*
* Catastrophic error. Mark our device
* as invalid.
*/
xpt_print_path(periph->path);
printf("Invalidating device\n");
softc->flags |= PT_FLAG_DEVICE_INVALID;
}
/*
* return all queued I/O with EIO, so that
* the client can retry these I/Os in the
* proper order should it attempt to recover.
*/
while ((q_bp = bufq_first(&softc->buf_queue))
!= NULL) {
bufq_remove(&softc->buf_queue, q_bp);
q_bp->b_resid = q_bp->b_bcount;
q_bp->b_error = EIO;
q_bp->b_flags |= B_ERROR;
biodone(q_bp);
}
splx(s);
bp->b_error = error;
bp->b_resid = bp->b_bcount;
bp->b_flags |= B_ERROR;
} else {
bp->b_resid = csio->resid;
bp->b_error = 0;
if (bp->b_resid != 0) {
/* Short transfer ??? */
bp->b_flags |= B_ERROR;
}
}
if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0)
cam_release_devq(done_ccb->ccb_h.path,
/*relsim_flags*/0,
/*reduction*/0,
/*timeout*/0,
/*getcount_only*/0);
} else {
bp->b_resid = csio->resid;
if (bp->b_resid != 0)
bp->b_flags |= B_ERROR;
}
/*
* Block out any asyncronous callbacks
* while we touch the pending ccb list.
*/
oldspl = splcam();
LIST_REMOVE(&done_ccb->ccb_h, periph_links.le);
splx(oldspl);
devstat_end_transaction(&softc->device_stats,
bp->b_bcount - bp->b_resid,
done_ccb->csio.tag_action & 0xf,
(bp->b_flags & B_READ) ? DEVSTAT_READ
: DEVSTAT_WRITE);
biodone(bp);
break;
}
case PT_CCB_WAITING:
/* Caller will release the CCB */
wakeup(&done_ccb->ccb_h.cbfcnp);
return;
}
xpt_release_ccb(done_ccb);
}
static int
pterror(union ccb *ccb, u_int32_t cam_flags, u_int32_t sense_flags)
{
struct pt_softc *softc;
struct cam_periph *periph;
periph = xpt_path_periph(ccb->ccb_h.path);
softc = (struct pt_softc *)periph->softc;
return(cam_periph_error(ccb, cam_flags, sense_flags,
&softc->saved_ccb));
}
void
scsi_send_receive(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
u_int tag_action, int readop, u_int byte2,
u_int32_t xfer_len, u_int8_t *data_ptr, u_int8_t sense_len,
u_int32_t timeout)
{
struct scsi_send_receive *scsi_cmd;
scsi_cmd = (struct scsi_send_receive *)&csio->cdb_io.cdb_bytes;
scsi_cmd->opcode = readop ? RECEIVE : SEND;
scsi_cmd->byte2 = byte2;
scsi_ulto3b(xfer_len, scsi_cmd->xfer_len);
scsi_cmd->control = 0;
cam_fill_csio(csio,
retries,
cbfcnp,
/*flags*/readop ? CAM_DIR_IN : CAM_DIR_OUT,
tag_action,
data_ptr,
xfer_len,
sense_len,
sizeof(*scsi_cmd),
timeout);
}