.. |
bcm283x_dwc_fdt.c
|
Refactor mailbox property API to make it usable for /dev/vcio driver:
|
2015-11-05 03:46:54 +00:00 |
bcm2835_audio.c
|
Fix some of WITNESS complaints and bootup lock by removing msg_avail
|
2015-11-08 04:15:52 +00:00 |
bcm2835_bsc.c
|
Add a mask to match only the relative base address of BSC controllers.
|
2015-02-16 19:06:31 +00:00 |
bcm2835_bscreg.h
|
Add the Raspberry Pi BSC (I2C compliant) controller driver.
|
2013-10-23 12:29:39 +00:00 |
bcm2835_bscvar.h
|
Add a mask to match only the relative base address of BSC controllers.
|
2015-02-16 19:06:31 +00:00 |
bcm2835_common.c
|
Stop using machine/fdt.h in the arm kernel code when we don't need it.
|
2015-04-04 21:34:26 +00:00 |
bcm2835_cpufreq.c
|
Refactor bcm2835_cpufreq to use bcm2835_mbox_property API
|
2015-11-11 00:45:41 +00:00 |
bcm2835_dma.c
|
Follow r261352 by updating all drivers which are children of simplebus
|
2014-02-02 19:17:28 +00:00 |
bcm2835_dma.h
|
Add driver for BCM2835's DMA engine
|
2013-02-28 19:48:19 +00:00 |
bcm2835_fb.c
|
Fix the sc(4) framebuffer driver on RPi 2.
|
2015-05-02 22:40:41 +00:00 |
bcm2835_fbd.c
|
Refactor mailbox property API to make it usable for /dev/vcio driver:
|
2015-11-05 03:46:54 +00:00 |
bcm2835_gpio.c
|
Make use of the newly introduced macros.
|
2015-02-17 20:37:21 +00:00 |
bcm2835_gpio.h
|
Export a function to allow BCM2835's peripheral devices to enable their
|
2013-09-07 18:48:15 +00:00 |
bcm2835_intr.c
|
Make interrupt dispatching MP safe. Use GPU interrupt bit in per-core
|
2015-11-06 17:12:33 +00:00 |
bcm2835_machdep.c
|
Add support for the Raspberry Pi 2. As the chip is based on the bcm2835 in
|
2015-03-25 10:59:42 +00:00 |
bcm2835_mbox_prop.h
|
Refactor mailbox property API to make it usable for /dev/vcio driver:
|
2015-11-05 03:46:54 +00:00 |
bcm2835_mbox.c
|
- Set have_message in interrupt to handle "response before READ" case
|
2015-11-11 00:41:02 +00:00 |
bcm2835_mbox.h
|
Driver for CPU frequency/voltage control on the Raspberry Pi.
|
2014-12-20 19:15:10 +00:00 |
bcm2835_sdhci.c
|
Refactor mailbox property API to make it usable for /dev/vcio driver:
|
2015-11-05 03:46:54 +00:00 |
bcm2835_spi.c
|
Add a missing wakeup when releasing ownership of the SPI hardware.
|
2015-06-02 16:07:28 +00:00 |
bcm2835_spireg.h
|
Add the Raspberry Pi SPI controller driver.
|
2013-10-24 16:27:33 +00:00 |
bcm2835_spivar.h
|
Add the Raspberry Pi SPI controller driver.
|
2013-10-24 16:27:33 +00:00 |
bcm2835_systimer.c
|
Use simple fixed name strings for these timecounters and eventimers which
|
2015-08-14 16:48:07 +00:00 |
bcm2835_vcbus.h
|
Fix framebuffer compatibility with new RPi firmware. Framebuffer driver
|
2015-10-30 00:24:37 +00:00 |
bcm2835_vcio.c
|
Add /dev/vcio, userland access point to VideoCore mailbox property channel
|
2015-11-05 04:16:03 +00:00 |
bcm2835_wdog.c
|
Stop using machine/fdt.h in the arm kernel code when we don't need it.
|
2015-04-04 21:34:26 +00:00 |
bcm2835_wdog.h
|
|
|
bcm2836_mp.c
|
An IPI must be cleared before it is handled otherwise next IPI could be
|
2015-10-01 12:09:05 +00:00 |
bcm2836.c
|
Make interrupt dispatching MP safe. Use GPU interrupt bit in per-core
|
2015-11-06 17:12:33 +00:00 |
bcm2836.h
|
Make interrupt dispatching MP safe. Use GPU interrupt bit in per-core
|
2015-11-06 17:12:33 +00:00 |
files.bcm283x
|
Move more bus_space_* files to be built by files.arm. This leaves the
|
2015-11-21 15:30:08 +00:00 |
files.bcm2835
|
Build the cpufunc_asm_* files based on the cpu type, not which config file
|
2015-03-29 22:43:39 +00:00 |
files.bcm2836
|
Create device options for the two common ARM timers.
|
2015-11-21 16:23:56 +00:00 |
std.bcm2835
|
Add the SOC_BCM2835 and SOC_BCM2836 options for the arm kernel and add the
|
2015-03-24 18:46:01 +00:00 |
std.bcm2836
|
Add the SMP support for Raspberry Pi 2 (BCM2836).
|
2015-05-07 22:11:44 +00:00 |
std.rpi
|
Stop setting {KERN,}PHYSADDR on armv6, it's unneeded.
|
2015-11-20 16:12:22 +00:00 |
vc_vchi_audioserv_defs.h
|
Add VideoCore audio driver for Rasperry Pi (BCM2835)
|
2015-02-08 01:12:40 +00:00 |