..
ar2133.c
Add some more debugging
2011-04-02 00:24:13 +00:00
ar5416_ani.c
The AR5416+ chips all have MIB counters (which the AR5416 ANI code assumes)
2011-03-23 03:58:55 +00:00
ar5416_attach.c
Add a HAL capability bit for supporting self-linked RX descriptors and disable it for the 11n chipsets.
2011-04-04 14:52:31 +00:00
ar5416_beacon.c
Replace Id keyword with the FreeBSD keyword.
2010-01-29 10:07:17 +00:00
ar5416_cal_adcdc.c
Replace Id keyword with the FreeBSD keyword.
2010-01-29 10:07:17 +00:00
ar5416_cal_adcgain.c
Replace Id keyword with the FreeBSD keyword.
2010-01-29 10:07:17 +00:00
ar5416_cal_iq.c
Fix the calibration logic to correctly clamp the calculated coefficient.
2010-08-14 15:28:15 +00:00
ar5416_cal.c
Export the per-chain ctl/ext noise floor values, raw and uncut, to the
2011-04-08 06:58:01 +00:00
ar5416_cal.h
Introduce methods for the initial calibration and the new PA calibration
2011-03-11 11:35:36 +00:00
ar5416_eeprom.c
Replace Id keyword with the FreeBSD keyword.
2010-01-29 10:07:17 +00:00
ar5416_gpio.c
Add support for the AR9285 chipset, which is found on many netbooks
2010-01-29 10:10:14 +00:00
ar5416_interrupts.c
Introduce AH_AR5416_INTERRUPT_MITIGATION which enables interrupt mitigation for
2011-03-31 08:48:05 +00:00
ar5416_keycache.c
Replace Id keyword with the FreeBSD keyword.
2010-01-29 10:07:17 +00:00
ar5416_misc.c
Disable classic-style fast diversity on the AR5416 and later.
2011-04-16 12:46:46 +00:00
ar5416_phy.c
Modify the AR5416 11na rate table to use 24mb OFDM 11a for control traffic,
2011-02-21 05:10:34 +00:00
ar5416_power.c
Replace Id keyword with the FreeBSD keyword.
2010-01-29 10:02:50 +00:00
ar5416_recv.c
Add a HAL capability bit for supporting self-linked RX descriptors and disable it for the 11n chipsets.
2011-04-04 14:52:31 +00:00
ar5416_reset.c
Remove some duplicate code from the AR9285 TX power configuration path.
2011-04-16 11:59:37 +00:00
ar5416_xmit.c
Bring over a few queue changes from ath9k:
2011-03-22 00:14:17 +00:00
ar5416.h
Remove some duplicate code from the AR9285 TX power configuration path.
2011-04-16 11:59:37 +00:00
ar5416.ini
Bring over ar5416 inivals from Linux-2.6.34.
2010-08-10 07:48:13 +00:00
ar5416desc.h
Replace Id keyword with the FreeBSD keyword.
2010-01-29 10:07:17 +00:00
ar5416phy.h
Add in some AR9280 specific board configuration options.
2011-02-07 22:00:31 +00:00
ar5416reg.h
The right commit - add a couple more AR_PCU_MISC_MODE2 register bits -
2011-03-25 00:06:58 +00:00