freebsd-skq/sys/mips/conf/ALFA_HORNET_UB
Adrian Chadd dfd325ea2c Add a configuration file and hints file for the Alfa Networks Hornet UB
board.

This is another AR9331 board similar to the Carambola2. It has different
ethernet and LED wiring though.

They make a variety of boards that mostly differ on the amount of RAM/flash
available.  Alfa Networks graciously donated a handful of 64MB RAM/16MB flash
boards so I can finish off 802.11s support for the AR93xx chips and do up
a tech demonstration with it.

This is enough to bring up the board.

Tested:

* Alfa networks UB Hornet board - 64MB ram, 16MB flash version.

Thankyou to Alfa Networks for the development boards!

Sponsored by:	Alfa Networks (hardware only)
2013-10-25 04:06:54 +00:00

58 lines
1.3 KiB
Plaintext

#
# Alfa Networks Hornet UB - an AR933x based SoC wifi device.
#
# http://www.alfa.com.tw/products_show.php?pc=99&ps=50
#
# This is for the 64MB RAM/16MB flash part. They also
# do various other versions; they have different RAM/flash
# configurations.
#
# * AR9330 SoC
# * 64MB RAM
# * 16MB flash
# * Integrated 1x1 2GHz wifi and 10/100 bridge
#
# $FreeBSD$
#
# Include the default AR933x parameters
include "AR933X_BASE"
ident ALFA_HORNET_UB
# Override hints with board values
hints "ALFA_HORNET_UB.hints"
# Board memory - 64MB
options AR71XX_REALMEM=(64*1024*1024)
# i2c GPIO bus
#device gpioiic
#device iicbb
#device iicbus
#device iic
# Options required for miiproxy and mdiobus
options ARGE_MDIO # Export an MDIO bus separate from arge
device miiproxy # MDIO bus <-> MII PHY rendezvous
device etherswitch
device arswitch
# read MSDOS formatted disks - USB
#options MSDOSFS
# Enable the uboot environment stuff rather then the
# redboot stuff.
options AR71XX_ENV_UBOOT
# uzip - to boot natively from flash
device geom_uncompress
options GEOM_UNCOMPRESS
# Used for the static uboot partition map
device geom_map
# Boot off of the rootfs, as defined in the geom_map setup.
options ROOTDEVNAME=\"ufs:map/rootfs.uncompress\"