d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
a9d4f3ded4
freebsd-skq/sys/dev/acpica/acpivar.h
Nate Lawson 907b6777c1 Re-work Cx handling to be per-cpu and asymmetrical, fixing support on 
modern dual-core systems as well.

- Parse the _CST packages for each cpu and track all the states individually,
on a per-cpu basis.

- Revert to generic FADT/P_BLK based Cx control if the _CST package
is not present on all cpus. In that case, the new driver will
still support per-cpu Cx state handling. The driver will determine the
highest Cx level that can be supported by all the cpus and configure the
available Cx state based on that.

- Fixed the case where multiple cpus in the system share the same
registers for Cx state handling. To do that, added a new flag
parameter to the acpi_PkgGas and acpi_bus_alloc_gas functions that
enable the caller to add the RF_SHAREABLE flag.  This flag could also be
useful to other callers (acpi_throttle?) in the tree but this change is
not yet made.

- For Core Duo cpus, both cores seems to be taken out of C3 state when
any one of the cores need to transition out. This broke the short sleep
detection logic.  It is disabled now if there is more than one cpu in
the system for now as it fixed it in my case.  This quirk may need to
be re-enabled later differently.

- Added support to control cx_lowest on a per-cpu basis. There is still
a generic cx_lowest to enable changing cx_lowest for all cpus with a single
sysctl and for ease of use.  Sample output for the new sysctl:

dev.cpu.0.cx_supported: C1/1 C2/1 C3/57
dev.cpu.0.cx_lowest: C3
dev.cpu.0.cx_usage: 0.00% 43.16% 56.83%
dev.cpu.1.cx_supported: C1/1 C2/1 C3/57
dev.cpu.1.cx_lowest: C3
dev.cpu.1.cx_usage: 0.00% 45.65% 54.34%
hw.acpi.cpu.cx_lowest: C3

This work was done by Stephane E. Potvin with some simple reworking by
myself.  Thank you.

Submitted by:	Stephane E. Potvin <sepotvin / videotron.ca>
MFC after:	2 weeks
2007-01-07 21:53:42 +00:00

433 lines
14 KiB
C
Raw Blame History

/*-
* Copyright (c) 2000 Mitsuru IWASAKI <iwasaki@jp.freebsd.org>
* Copyright (c) 2000 Michael Smith <msmith@freebsd.org>
* Copyright (c) 2000 BSDi
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _ACPIVAR_H_
#define _ACPIVAR_H_
#ifdef _KERNEL
#include "acpi_if.h"
#include "bus_if.h"
#include <sys/eventhandler.h>
#include <sys/ktr.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/sx.h>
#include <sys/sysctl.h>
#include <machine/bus.h>
#include <machine/resource.h>
struct acpi_softc {
device_t acpi_dev;
struct cdev *acpi_dev_t;
struct resource *acpi_irq;
int acpi_irq_rid;
void *acpi_irq_handle;
int acpi_enabled;
int acpi_sstate;
int acpi_sleep_disabled;
struct sysctl_ctx_list acpi_sysctl_ctx;
struct sysctl_oid *acpi_sysctl_tree;
int acpi_power_button_sx;
int acpi_sleep_button_sx;
int acpi_lid_switch_sx;
int acpi_standby_sx;
int acpi_suspend_sx;
int acpi_sleep_delay;
int acpi_s4bios;
int acpi_do_disable;
int acpi_verbose;
int acpi_handle_reboot;
bus_dma_tag_t acpi_waketag;
bus_dmamap_t acpi_wakemap;
vm_offset_t acpi_wakeaddr;
vm_paddr_t acpi_wakephys;
};
struct acpi_device {
/* ACPI ivars */
ACPI_HANDLE ad_handle;
int ad_magic;
void *ad_private;
int ad_flags;
/* Resources */
struct resource_list ad_rl;
};
#define ACPI_PRW_MAX_POWERRES 8
struct acpi_prw_data {
ACPI_HANDLE gpe_handle;
int gpe_bit;
int lowest_wake;
ACPI_OBJECT power_res[ACPI_PRW_MAX_POWERRES];
int power_res_count;
};
/* Flags for each device defined in the AML namespace. */
#define ACPI_FLAG_WAKE_ENABLED 0x1
/* Macros for extracting parts of a PCI address from an _ADR value. */
#define ACPI_ADR_PCI_SLOT(adr) (((adr) & 0xffff0000) >> 16)
#define ACPI_ADR_PCI_FUNC(adr) ((adr) & 0xffff)
/*
* Entry points to ACPI from above are global functions defined in this
* file, sysctls, and I/O on the control device. Entry points from below
* are interrupts (the SCI), notifies, task queue threads, and the thermal
* zone polling thread.
*
* ACPI tables and global shared data are protected by a global lock
* (acpi_mutex).
*
* Each ACPI device can have its own driver-specific mutex for protecting
* shared access to local data. The ACPI_LOCK macros handle mutexes.
*
* Drivers that need to serialize access to functions (e.g., to route
* interrupts, get/set control paths, etc.) should use the sx lock macros
* (ACPI_SERIAL).
*
* ACPI-CA handles its own locking and should not be called with locks held.
*
* The most complicated path is:
* GPE -> EC runs _Qxx -> _Qxx reads EC space -> GPE
*/
extern struct mtx acpi_mutex;
#define ACPI_LOCK(sys) mtx_lock(&sys##_mutex)
#define ACPI_UNLOCK(sys) mtx_unlock(&sys##_mutex)
#define ACPI_LOCK_ASSERT(sys) mtx_assert(&sys##_mutex, MA_OWNED);
#define ACPI_LOCK_DECL(sys, name) \
static struct mtx sys##_mutex; \
MTX_SYSINIT(sys##_mutex, &sys##_mutex, name, MTX_DEF)
#define ACPI_SERIAL_BEGIN(sys) sx_xlock(&sys##_sxlock)
#define ACPI_SERIAL_END(sys) sx_xunlock(&sys##_sxlock)
#define ACPI_SERIAL_ASSERT(sys) sx_assert(&sys##_sxlock, SX_XLOCKED);
#define ACPI_SERIAL_DECL(sys, name) \
static struct sx sys##_sxlock; \
SX_SYSINIT(sys##_sxlock, &sys##_sxlock, name)
/*
* ACPI CA does not define layers for non-ACPI CA drivers.
* We define some here within the range provided.
*/
#define ACPI_AC_ADAPTER 0x00010000
#define ACPI_BATTERY 0x00020000
#define ACPI_BUS 0x00040000
#define ACPI_BUTTON 0x00080000
#define ACPI_EC 0x00100000
#define ACPI_FAN 0x00200000
#define ACPI_POWERRES 0x00400000
#define ACPI_PROCESSOR 0x00800000
#define ACPI_THERMAL 0x01000000
#define ACPI_TIMER 0x02000000
#define ACPI_OEM 0x04000000
/*
* Constants for different interrupt models used with acpi_SetIntrModel().
*/
#define ACPI_INTR_PIC 0
#define ACPI_INTR_APIC 1
#define ACPI_INTR_SAPIC 2
/*
* Various features and capabilities for the acpi_get_features() method.
* In particular, these are used for the ACPI 3.0 _PDC and _OSC methods.
* See the Intel document titled "Processor Driver Capabilities Bit
* Definitions", number 302223-002.
*/
#define ACPI_CAP_PERF_MSRS (1 << 0) /* Intel SpeedStep PERF_CTL MSRs */
#define ACPI_CAP_C1_IO_HALT (1 << 1) /* Intel C1 "IO then halt" sequence */
#define ACPI_CAP_THR_MSRS (1 << 2) /* Intel OnDemand throttling MSRs */
#define ACPI_CAP_SMP_SAME (1 << 3) /* MP C1, Px, and Tx (all the same) */
#define ACPI_CAP_SMP_SAME_C3 (1 << 4) /* MP C2 and C3 (all the same) */
#define ACPI_CAP_SMP_DIFF_PX (1 << 5) /* MP Px (different, using _PSD) */
#define ACPI_CAP_SMP_DIFF_CX (1 << 6) /* MP Cx (different, using _CSD) */
#define ACPI_CAP_SMP_DIFF_TX (1 << 7) /* MP Tx (different, using _TSD) */
#define ACPI_CAP_SMP_C1_NATIVE (1 << 8) /* MP C1 support other than halt */
/*
* Quirk flags.
*
* ACPI_Q_BROKEN: Disables all ACPI support.
* ACPI_Q_TIMER: Disables support for the ACPI timer.
* ACPI_Q_MADT_IRQ0: Specifies that ISA IRQ 0 is wired up to pin 0 of the
* first APIC and that the MADT should force that by ignoring the PC-AT
* compatible flag and ignoring overrides that redirect IRQ 0 to pin 2.
*/
extern int acpi_quirks;
#define ACPI_Q_OK 0
#define ACPI_Q_BROKEN (1 << 0)
#define ACPI_Q_TIMER (1 << 1)
#define ACPI_Q_MADT_IRQ0 (1 << 2)
/*
* Note that the low ivar values are reserved to provide
* interface compatibility with ISA drivers which can also
* attach to ACPI.
*/
#define ACPI_IVAR_HANDLE 0x100
#define ACPI_IVAR_MAGIC 0x101
#define ACPI_IVAR_PRIVATE 0x102
#define ACPI_IVAR_FLAGS 0x103
/*
* Accessor functions for our ivars. Default value for BUS_READ_IVAR is
* (type) 0. The <sys/bus.h> accessor functions don't check return values.
*/
#define __ACPI_BUS_ACCESSOR(varp, var, ivarp, ivar, type) \
\
static __inline type varp ## _get_ ## var(device_t dev) \
{ \
uintptr_t v = 0; \
BUS_READ_IVAR(device_get_parent(dev), dev, \
ivarp ## _IVAR_ ## ivar, &v); \
return ((type) v); \
} \
\
static __inline void varp ## _set_ ## var(device_t dev, type t) \
{ \
uintptr_t v = (uintptr_t) t; \
BUS_WRITE_IVAR(device_get_parent(dev), dev, \
ivarp ## _IVAR_ ## ivar, v); \
}
__ACPI_BUS_ACCESSOR(acpi, handle, ACPI, HANDLE, ACPI_HANDLE)
__ACPI_BUS_ACCESSOR(acpi, magic, ACPI, MAGIC, int)
__ACPI_BUS_ACCESSOR(acpi, private, ACPI, PRIVATE, void *)
__ACPI_BUS_ACCESSOR(acpi, flags, ACPI, FLAGS, int)
void acpi_fake_objhandler(ACPI_HANDLE h, UINT32 fn, void *data);
static __inline device_t
acpi_get_device(ACPI_HANDLE handle)
{
void *dev = NULL;
AcpiGetData(handle, acpi_fake_objhandler, &dev);
return ((device_t)dev);
}
static __inline ACPI_OBJECT_TYPE
acpi_get_type(device_t dev)
{
ACPI_HANDLE h;
ACPI_OBJECT_TYPE t;
if ((h = acpi_get_handle(dev)) == NULL)
return (ACPI_TYPE_NOT_FOUND);
if (AcpiGetType(h, &t) != AE_OK)
return (ACPI_TYPE_NOT_FOUND);
return (t);
}
#ifdef ACPI_DEBUGGER
void acpi_EnterDebugger(void);
#endif
#ifdef ACPI_DEBUG
#include <sys/cons.h>
#define STEP(x) do {printf x, printf("\n"); cngetc();} while (0)
#else
#define STEP(x)
#endif
#define ACPI_VPRINT(dev, acpi_sc, x...) do { \
if (acpi_get_verbose(acpi_sc)) \
device_printf(dev, x); \
} while (0)
/* Values for the device _STA (status) method. */
#define ACPI_STA_PRESENT (1 << 0)
#define ACPI_STA_ENABLED (1 << 1)
#define ACPI_STA_SHOW_IN_UI (1 << 2)
#define ACPI_STA_FUNCTIONAL (1 << 3)
#define ACPI_STA_BATT_PRESENT (1 << 4)
#define ACPI_DEVINFO_PRESENT(x, flags) \
(((x) & (flags)) == (flags))
#define ACPI_DEVICE_PRESENT(x) \
ACPI_DEVINFO_PRESENT(x, ACPI_STA_PRESENT | ACPI_STA_FUNCTIONAL)
#define ACPI_BATTERY_PRESENT(x) \
ACPI_DEVINFO_PRESENT(x, ACPI_STA_PRESENT | ACPI_STA_FUNCTIONAL | \
ACPI_STA_BATT_PRESENT)
BOOLEAN acpi_DeviceIsPresent(device_t dev);
BOOLEAN acpi_BatteryIsPresent(device_t dev);
ACPI_STATUS acpi_GetHandleInScope(ACPI_HANDLE parent, char *path,
ACPI_HANDLE *result);
uint32_t acpi_TimerDelta(uint32_t end, uint32_t start);
ACPI_BUFFER *acpi_AllocBuffer(int size);
ACPI_STATUS acpi_ConvertBufferToInteger(ACPI_BUFFER *bufp,
UINT32 *number);
ACPI_STATUS acpi_GetInteger(ACPI_HANDLE handle, char *path,
UINT32 *number);
ACPI_STATUS acpi_SetInteger(ACPI_HANDLE handle, char *path,
UINT32 number);
ACPI_STATUS acpi_ForeachPackageObject(ACPI_OBJECT *obj,
void (*func)(ACPI_OBJECT *comp, void *arg), void *arg);
ACPI_STATUS acpi_FindIndexedResource(ACPI_BUFFER *buf, int index,
ACPI_RESOURCE **resp);
ACPI_STATUS acpi_AppendBufferResource(ACPI_BUFFER *buf,
ACPI_RESOURCE *res);
ACPI_STATUS acpi_OverrideInterruptLevel(UINT32 InterruptNumber);
ACPI_STATUS acpi_SetIntrModel(int model);
ACPI_STATUS acpi_SetSleepState(struct acpi_softc *sc, int state);
int acpi_wake_init(device_t dev, int type);
int acpi_wake_set_enable(device_t dev, int enable);
int acpi_parse_prw(ACPI_HANDLE h, struct acpi_prw_data *prw);
ACPI_STATUS acpi_Startup(void);
void acpi_UserNotify(const char *subsystem, ACPI_HANDLE h,
uint8_t notify);
int acpi_bus_alloc_gas(device_t dev, int *type, int *rid,
ACPI_GENERIC_ADDRESS *gas, struct resource **res,
u_int flags);
struct acpi_parse_resource_set {
void (*set_init)(device_t dev, void *arg, void **context);
void (*set_done)(device_t dev, void *context);
void (*set_ioport)(device_t dev, void *context, uint32_t base,
uint32_t length);
void (*set_iorange)(device_t dev, void *context, uint32_t low,
uint32_t high, uint32_t length, uint32_t align);
void (*set_memory)(device_t dev, void *context, uint32_t base,
uint32_t length);
void (*set_memoryrange)(device_t dev, void *context, uint32_t low,
uint32_t high, uint32_t length, uint32_t align);
void (*set_irq)(device_t dev, void *context, u_int8_t *irq,
int count, int trig, int pol);
void (*set_ext_irq)(device_t dev, void *context, u_int32_t *irq,
int count, int trig, int pol);
void (*set_drq)(device_t dev, void *context, u_int8_t *drq,
int count);
void (*set_start_dependent)(device_t dev, void *context,
int preference);
void (*set_end_dependent)(device_t dev, void *context);
};
extern struct acpi_parse_resource_set acpi_res_parse_set;
void acpi_config_intr(device_t dev, ACPI_RESOURCE *res);
ACPI_STATUS acpi_lookup_irq_resource(device_t dev, int rid,
struct resource *res, ACPI_RESOURCE *acpi_res);
ACPI_STATUS acpi_parse_resources(device_t dev, ACPI_HANDLE handle,
struct acpi_parse_resource_set *set, void *arg);
/* ACPI event handling */
UINT32 acpi_event_power_button_sleep(void *context);
UINT32 acpi_event_power_button_wake(void *context);
UINT32 acpi_event_sleep_button_sleep(void *context);
UINT32 acpi_event_sleep_button_wake(void *context);
#define ACPI_EVENT_PRI_FIRST 0
#define ACPI_EVENT_PRI_DEFAULT 10000
#define ACPI_EVENT_PRI_LAST 20000
typedef void (*acpi_event_handler_t)(void *, int);
EVENTHANDLER_DECLARE(acpi_sleep_event, acpi_event_handler_t);
EVENTHANDLER_DECLARE(acpi_wakeup_event, acpi_event_handler_t);
/* Device power control. */
ACPI_STATUS acpi_pwr_wake_enable(ACPI_HANDLE consumer, int enable);
ACPI_STATUS acpi_pwr_switch_consumer(ACPI_HANDLE consumer, int state);
/* Misc. */
static __inline struct acpi_softc *
acpi_device_get_parent_softc(device_t child)
{
device_t parent;
parent = device_get_parent(child);
if (parent == NULL)
return (NULL);
return (device_get_softc(parent));
}
static __inline int
acpi_get_verbose(struct acpi_softc *sc)
{
if (sc)
return (sc->acpi_verbose);
return (0);
}
char *acpi_name(ACPI_HANDLE handle);
int acpi_avoid(ACPI_HANDLE handle);
int acpi_disabled(char *subsys);
int acpi_machdep_init(device_t dev);
void acpi_install_wakeup_handler(struct acpi_softc *sc);
int acpi_sleep_machdep(struct acpi_softc *sc, int state);
int acpi_table_quirks(int *quirks);
int acpi_machdep_quirks(int *quirks);
/* Battery Abstraction. */
struct acpi_battinfo;
int acpi_battery_register(device_t dev);
int acpi_battery_remove(device_t dev);
int acpi_battery_get_units(void);
int acpi_battery_get_info_expire(void);
int acpi_battery_bst_valid(struct acpi_bst *bst);
int acpi_battery_bif_valid(struct acpi_bif *bif);
int acpi_battery_get_battinfo(device_t dev,
struct acpi_battinfo *info);
/* Embedded controller. */
void acpi_ec_ecdt_probe(device_t);
/* AC adapter interface. */
int acpi_acad_get_acline(int *);
/* Package manipulation convenience functions. */
#define ACPI_PKG_VALID(pkg, size) \
((pkg) != NULL && (pkg)->Type == ACPI_TYPE_PACKAGE && \
(pkg)->Package.Count >= (size))
int acpi_PkgInt(ACPI_OBJECT *res, int idx, ACPI_INTEGER *dst);
int acpi_PkgInt32(ACPI_OBJECT *res, int idx, uint32_t *dst);
int acpi_PkgStr(ACPI_OBJECT *res, int idx, void *dst, size_t size);
int acpi_PkgGas(device_t dev, ACPI_OBJECT *res, int idx, int *type,
int *rid, struct resource **dst, u_int flags);
ACPI_HANDLE acpi_GetReference(ACPI_HANDLE scope, ACPI_OBJECT *obj);
/* Default number of task queue threads to start. */
#define ACPI_MAX_THREADS 3
/* Use the device logging level for ktr(4). */
#define KTR_ACPI KTR_DEV
#endif /* _KERNEL */
#endif /* !_ACPIVAR_H_ */
Reference in New Issue View Git Blame Copy Permalink