d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
aa1c16b781
freebsd-skq/sys/isa/sio.c
Poul-Henning Kamp d6a0e38a1b Remove five now unused fields from struct cdevsw. They should never 
have been there in the first place.  A GENERIC kernel shrinks almost 1k.

Add a slightly different safetybelt under nostop for tty drivers.

Add some missing FreeBSD tags
1999-09-25 18:24:47 +00:00

3040 lines
78 KiB
C
Raw Blame History

/*-
* Copyright (c) 1991 The Regents of the University of California.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
* from: @(#)com.c 7.5 (Berkeley) 5/16/91
* from: i386/isa sio.c,v 1.234
*/
#include "opt_comconsole.h"
#include "opt_compat.h"
#include "opt_ddb.h"
#include "opt_sio.h"
#include "sio.h"
/*
* Serial driver, based on 386BSD-0.1 com driver.
* Mostly rewritten to use pseudo-DMA.
* Works for National Semiconductor NS8250-NS16550AF UARTs.
* COM driver, based on HP dca driver.
*
* Changes for PC-Card integration:
* - Added PC-Card driver table and handlers
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/reboot.h>
#include <sys/malloc.h>
#include <sys/tty.h>
#include <sys/proc.h>
#include <sys/module.h>
#include <sys/conf.h>
#include <sys/dkstat.h>
#include <sys/fcntl.h>
#include <sys/interrupt.h>
#include <sys/kernel.h>
#include <sys/syslog.h>
#include <sys/sysctl.h>
#include <sys/bus.h>
#include <machine/bus.h>
#include <sys/rman.h>
#include <sys/timepps.h>
#include <isa/isareg.h>
#include <isa/isavar.h>
#include <machine/lock.h>
#include <machine/clock.h>
#include <machine/ipl.h>
#ifndef SMP
#include <machine/lock.h>
#endif
#include <machine/resource.h>
#include <isa/sioreg.h>
#ifdef COM_ESP
#include <isa/ic/esp.h>
#endif
#include <isa/ic/ns16550.h>
#if 0
#include "card.h"
#if NCARD > 0
#include <sys/module.h>
#include <pccard/cardinfo.h>
#include <pccard/slot.h>
#endif
#else
#define NCARD 0
#endif
#ifndef __i386__
#define disable_intr()
#define enable_intr()
#endif
#ifdef SMP
#define disable_intr() COM_DISABLE_INTR()
#define enable_intr() COM_ENABLE_INTR()
#endif /* SMP */
#ifndef EXTRA_SIO
#define EXTRA_SIO 4 /* XXX shouldn't need NSIO */
#endif
#define NSIOTOT (NSIO + EXTRA_SIO)
#define LOTS_OF_EVENTS 64 /* helps separate urgent events from input */
#define CALLOUT_MASK 0x80
#define CONTROL_MASK 0x60
#define CONTROL_INIT_STATE 0x20
#define CONTROL_LOCK_STATE 0x40
#define DEV_TO_UNIT(dev) (MINOR_TO_UNIT(minor(dev)))
#define MINOR_MAGIC_MASK (CALLOUT_MASK | CONTROL_MASK)
#define MINOR_TO_UNIT(mynor) ((mynor) & ~MINOR_MAGIC_MASK)
#ifdef COM_MULTIPORT
/* checks in flags for multiport and which is multiport "master chip"
* for a given card
*/
#define COM_ISMULTIPORT(flags) ((flags) & 0x01)
#define COM_MPMASTER(flags) (((flags) >> 8) & 0x0ff)
#define COM_NOTAST4(flags) ((flags) & 0x04)
#endif /* COM_MULTIPORT */
#define COM_CONSOLE(flags) ((flags) & 0x10)
#define COM_FORCECONSOLE(flags) ((flags) & 0x20)
#define COM_LLCONSOLE(flags) ((flags) & 0x40)
#define COM_DEBUGGER(flags) ((flags) & 0x80)
#define COM_LOSESOUTINTS(flags) ((flags) & 0x08)
#define COM_NOFIFO(flags) ((flags) & 0x02)
#define COM_ST16650A(flags) ((flags) & 0x20000)
#define COM_C_NOPROBE (0x40000)
#define COM_NOPROBE(flags) ((flags) & COM_C_NOPROBE)
#define COM_C_IIR_TXRDYBUG (0x80000)
#define COM_IIR_TXRDYBUG(flags) ((flags) & COM_C_IIR_TXRDYBUG)
#define COM_FIFOSIZE(flags) (((flags) & 0xff000000) >> 24)
#define com_scr 7 /* scratch register for 16450-16550 (R/W) */
/*
* com state bits.
* (CS_BUSY | CS_TTGO) and (CS_BUSY | CS_TTGO | CS_ODEVREADY) must be higher
* than the other bits so that they can be tested as a group without masking
* off the low bits.
*
* The following com and tty flags correspond closely:
* CS_BUSY = TS_BUSY (maintained by comstart(), siopoll() and
* siostop())
* CS_TTGO = ~TS_TTSTOP (maintained by comparam() and comstart())
* CS_CTS_OFLOW = CCTS_OFLOW (maintained by comparam())
* CS_RTS_IFLOW = CRTS_IFLOW (maintained by comparam())
* TS_FLUSH is not used.
* XXX I think TIOCSETA doesn't clear TS_TTSTOP when it clears IXON.
* XXX CS_*FLOW should be CF_*FLOW in com->flags (control flags not state).
*/
#define CS_BUSY 0x80 /* output in progress */
#define CS_TTGO 0x40 /* output not stopped by XOFF */
#define CS_ODEVREADY 0x20 /* external device h/w ready (CTS) */
#define CS_CHECKMSR 1 /* check of MSR scheduled */
#define CS_CTS_OFLOW 2 /* use CTS output flow control */
#define CS_DTR_OFF 0x10 /* DTR held off */
#define CS_ODONE 4 /* output completed */
#define CS_RTS_IFLOW 8 /* use RTS input flow control */
#define CSE_BUSYCHECK 1 /* siobusycheck() scheduled */
static char const * const error_desc[] = {
#define CE_OVERRUN 0
"silo overflow",
#define CE_INTERRUPT_BUF_OVERFLOW 1
"interrupt-level buffer overflow",
#define CE_TTY_BUF_OVERFLOW 2
"tty-level buffer overflow",
};
#define CE_NTYPES 3
#define CE_RECORD(com, errnum) (++(com)->delta_error_counts[errnum])
/* types. XXX - should be elsewhere */
typedef u_int Port_t; /* hardware port */
typedef u_char bool_t; /* boolean */
/* queue of linear buffers */
struct lbq {
u_char *l_head; /* next char to process */
u_char *l_tail; /* one past the last char to process */
struct lbq *l_next; /* next in queue */
bool_t l_queued; /* nonzero if queued */
};
/* com device structure */
struct com_s {
u_int flags; /* Copy isa device flags */
u_char state; /* miscellaneous flag bits */
bool_t active_out; /* nonzero if the callout device is open */
u_char cfcr_image; /* copy of value written to CFCR */
#ifdef COM_ESP
bool_t esp; /* is this unit a hayes esp board? */
#endif
u_char extra_state; /* more flag bits, separate for order trick */
u_char fifo_image; /* copy of value written to FIFO */
bool_t hasfifo; /* nonzero for 16550 UARTs */
bool_t st16650a; /* Is a Startech 16650A or RTS/CTS compat */
bool_t loses_outints; /* nonzero if device loses output interrupts */
u_char mcr_image; /* copy of value written to MCR */
#ifdef COM_MULTIPORT
bool_t multiport; /* is this unit part of a multiport device? */
#endif /* COM_MULTIPORT */
bool_t no_irq; /* nonzero if irq is not attached */
bool_t gone; /* hardware disappeared */
bool_t poll; /* nonzero if polling is required */
bool_t poll_output; /* nonzero if polling for output is required */
int unit; /* unit number */
int dtr_wait; /* time to hold DTR down on close (* 1/hz) */
u_int tx_fifo_size;
u_int wopeners; /* # processes waiting for DCD in open() */
/*
* The high level of the driver never reads status registers directly
* because there would be too many side effects to handle conveniently.
* Instead, it reads copies of the registers stored here by the
* interrupt handler.
*/
u_char last_modem_status; /* last MSR read by intr handler */
u_char prev_modem_status; /* last MSR handled by high level */
u_char hotchar; /* ldisc-specific char to be handled ASAP */
u_char *ibuf; /* start of input buffer */
u_char *ibufend; /* end of input buffer */
u_char *ibufold; /* old input buffer, to be freed */
u_char *ihighwater; /* threshold in input buffer */
u_char *iptr; /* next free spot in input buffer */
int ibufsize; /* size of ibuf (not include error bytes) */
int ierroff; /* offset of error bytes in ibuf */
struct lbq obufq; /* head of queue of output buffers */
struct lbq obufs[2]; /* output buffers */
Port_t data_port; /* i/o ports */
#ifdef COM_ESP
Port_t esp_port;
#endif
Port_t int_id_port;
Port_t iobase;
Port_t modem_ctl_port;
Port_t line_status_port;
Port_t modem_status_port;
Port_t intr_ctl_port; /* Ports of IIR register */
struct tty *tp; /* cross reference */
/* Initial state. */
struct termios it_in; /* should be in struct tty */
struct termios it_out;
/* Lock state. */
struct termios lt_in; /* should be in struct tty */
struct termios lt_out;
bool_t do_timestamp;
bool_t do_dcd_timestamp;
struct timeval timestamp;
struct timeval dcd_timestamp;
struct pps_state pps;
u_long bytes_in; /* statistics */
u_long bytes_out;
u_int delta_error_counts[CE_NTYPES];
u_long error_counts[CE_NTYPES];
struct resource *irqres;
struct resource *ioportres;
/*
* Data area for output buffers. Someday we should build the output
* buffer queue without copying data.
*/
u_char obuf1[256];
u_char obuf2[256];
};
#ifdef COM_ESP
static int espattach __P((struct com_s *com, Port_t esp_port));
#endif
static int sioattach __P((device_t dev));
static timeout_t siobusycheck;
static timeout_t siodtrwakeup;
static void comhardclose __P((struct com_s *com));
static void sioinput __P((struct com_s *com));
static void siointr1 __P((struct com_s *com));
static void siointr __P((void *arg));
static int commctl __P((struct com_s *com, int bits, int how));
static int comparam __P((struct tty *tp, struct termios *t));
static swihand_t siopoll;
static int sioprobe __P((device_t dev));
static void siosettimeout __P((void));
static int siosetwater __P((struct com_s *com, speed_t speed));
static void comstart __P((struct tty *tp));
static void comstop __P((struct tty *tp, int rw));
static timeout_t comwakeup;
static void disc_optim __P((struct tty *tp, struct termios *t,
struct com_s *com));
static char driver_name[] = "sio";
/* table and macro for fast conversion from a unit number to its com struct */
static devclass_t sio_devclass;
#define com_addr(unit) ((struct com_s *) \
devclass_get_softc(sio_devclass, unit))
static device_method_t sio_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, sioprobe),
DEVMETHOD(device_attach, sioattach),
{ 0, 0 }
};
static driver_t sio_driver = {
driver_name,
sio_methods,
sizeof(struct com_s),
};
static d_open_t sioopen;
static d_close_t sioclose;
static d_read_t sioread;
static d_write_t siowrite;
static d_ioctl_t sioioctl;
#define CDEV_MAJOR 28
static struct cdevsw sio_cdevsw = {
/* open */ sioopen,
/* close */ sioclose,
/* read */ sioread,
/* write */ siowrite,
/* ioctl */ sioioctl,
/* poll */ ttypoll,
/* mmap */ nommap,
/* strategy */ nostrategy,
/* name */ driver_name,
/* maj */ CDEV_MAJOR,
/* dump */ nodump,
/* psize */ nopsize,
/* flags */ D_TTY,
/* bmaj */ -1
};
int comconsole = -1;
static volatile speed_t comdefaultrate = CONSPEED;
#ifdef __alpha__
static volatile speed_t gdbdefaultrate = CONSPEED;
#endif
static u_int com_events; /* input chars + weighted output completions */
static Port_t siocniobase;
static int siocnunit;
static Port_t siogdbiobase;
static int siogdbunit = -1;
static bool_t sio_registered;
static int sio_timeout;
static int sio_timeouts_until_log;
static struct callout_handle sio_timeout_handle
= CALLOUT_HANDLE_INITIALIZER(&sio_timeout_handle);
static struct speedtab comspeedtab[] = {
{ 0, 0 },
{ 50, COMBRD(50) },
{ 75, COMBRD(75) },
{ 110, COMBRD(110) },
{ 134, COMBRD(134) },
{ 150, COMBRD(150) },
{ 200, COMBRD(200) },
{ 300, COMBRD(300) },
{ 600, COMBRD(600) },
{ 1200, COMBRD(1200) },
{ 1800, COMBRD(1800) },
{ 2400, COMBRD(2400) },
{ 4800, COMBRD(4800) },
{ 9600, COMBRD(9600) },
{ 19200, COMBRD(19200) },
{ 38400, COMBRD(38400) },
{ 57600, COMBRD(57600) },
{ 115200, COMBRD(115200) },
{ -1, -1 }
};
#ifdef COM_ESP
/* XXX configure this properly. */
static Port_t likely_com_ports[] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, };
static Port_t likely_esp_ports[] = { 0x140, 0x180, 0x280, 0 };
#endif
/*
* handle sysctl read/write requests for console speed
*
* In addition to setting comdefaultrate for I/O through /dev/console,
* also set the initial and lock values for the /dev/ttyXX device
* if there is one associated with the console. Finally, if the /dev/tty
* device has already been open, change the speed on the open running port
* itself.
*/
static int
sysctl_machdep_comdefaultrate SYSCTL_HANDLER_ARGS
{
int error, s;
speed_t newspeed;
struct com_s *com;
struct tty *tp;
newspeed = comdefaultrate;
error = sysctl_handle_opaque(oidp, &newspeed, sizeof newspeed, req);
if (error || !req->newptr)
return (error);
comdefaultrate = newspeed;
if (comconsole < 0) /* serial console not selected? */
return (0);
com = com_addr(comconsole);
if (!com)
return (ENXIO);
/*
* set the initial and lock rates for /dev/ttydXX and /dev/cuaXX
* (note, the lock rates really are boolean -- if non-zero, disallow
* speed changes)
*/
com->it_in.c_ispeed = com->it_in.c_ospeed =
com->lt_in.c_ispeed = com->lt_in.c_ospeed =
com->it_out.c_ispeed = com->it_out.c_ospeed =
com->lt_out.c_ispeed = com->lt_out.c_ospeed = comdefaultrate;
/*
* if we're open, change the running rate too
*/
tp = com->tp;
if (tp && (tp->t_state & TS_ISOPEN)) {
tp->t_termios.c_ispeed =
tp->t_termios.c_ospeed = comdefaultrate;
s = spltty();
error = comparam(tp, &tp->t_termios);
splx(s);
}
return error;
}
SYSCTL_PROC(_machdep, OID_AUTO, conspeed, CTLTYPE_INT | CTLFLAG_RW,
0, 0, sysctl_machdep_comdefaultrate, "I", "");
#if NCARD > 0
/*
* PC-Card (PCMCIA) specific code.
*/
static int sioinit __P((struct pccard_devinfo *));
static void siounload __P((struct pccard_devinfo *));
static int card_intr __P((struct pccard_devinfo *));
PCCARD_MODULE(sio, sioinit, siounload, card_intr, 0, tty_imask);
/*
* Initialize the device - called from Slot manager.
*/
int
sioinit(struct pccard_devinfo *devi)
{
/* validate unit number. */
if (devi->isahd.id_unit >= (NSIOTOT))
return(ENODEV);
/* Make sure it isn't already probed. */
if (com_addr(devi->isahd.id_unit))
return(EBUSY);
/* It's already probed as serial by Upper */
devi->isahd.id_flags |= COM_C_NOPROBE;
/*
* attach the device.
*/
if (sioattach(devi->isahd.id_device) == 0)
return(ENXIO);
return(0);
}
/*
* siounload - unload the driver and clear the table.
* XXX TODO:
* This is usually called when the card is ejected, but
* can be caused by a modunload of a controller driver.
* The idea is to reset the driver's view of the device
* and ensure that any driver entry points such as
* read and write do not hang.
*/
static void
siounload(struct pccard_devinfo *devi)
{
struct com_s *com;
if (!devi) {
printf("NULL devi in siounload\n");
return;
}
com = com_addr(devi->isahd.id_unit);
if (!com) {
printf("NULL com in siounload\n");
return;
}
if (!com->iobase) {
printf("sio%d already unloaded!\n",devi->isahd.id_unit);
return;
}
if (com->tp && (com->tp->t_state & TS_ISOPEN)) {
com->gone = 1;
printf("sio%d: unload\n", devi->isahd.id_unit);
com->tp->t_gen++;
ttyclose(com->tp);
ttwakeup(com->tp);
ttwwakeup(com->tp);
} else {
if (com->ibuf != NULL)
free(com->ibuf, M_DEVBUF);
free(com, M_DEVBUF);
printf("sio%d: unload,gone\n", devi->isahd.id_unit);
}
}
/*
* card_intr - Shared interrupt called from
* front end of PC-Card handler.
*/
static int
card_intr(struct pccard_devinfo *devi)
{
struct com_s *com;
COM_LOCK();
com = com_addr(devi->isahd.id_unit);
if (com && !com->gone)
siointr1(com_addr(devi->isahd.id_unit));
COM_UNLOCK();
return(1);
}
#endif /* NCARD > 0 */
#define SET_FLAG(dev, bit) device_set_flags(dev, device_get_flags(dev) | (bit))
#define CLR_FLAG(dev, bit) device_set_flags(dev, device_get_flags(dev) & ~(bit))
static struct isa_pnp_id sio_ids[] = {
{0x0005d041, "Standard PC COM port"}, /* PNP0500 */
{0x0105d041, "16550A-compatible COM port"}, /* PNP0501 */
{0x0205d041, "Multiport serial device (non-intelligent 16550)"}, /* PNP0502 */
{0x1005d041, "Generic IRDA-compatible device"}, /* PNP0510 */
{0x1105d041, "Generic IRDA-compatible device"}, /* PNP0511 */
{0x31307256, "USR3031"}, /* USR3031 */
{0}
};
static int
sioprobe(dev)
device_t dev;
{
static bool_t already_init;
bool_t failures[10];
int fn;
device_t idev;
Port_t iobase;
intrmask_t irqmap[4];
intrmask_t irqs;
u_char mcr_image;
int result;
device_t xdev;
u_int flags = device_get_flags(dev);
int rid;
struct resource *port;
/* Check isapnp ids */
if (ISA_PNP_PROBE(device_get_parent(dev), dev, sio_ids) == ENXIO)
return (ENXIO);
rid = 0;
port = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid,
0, ~0, IO_COMSIZE, RF_ACTIVE);
if (!port)
return ENXIO;
if (!already_init) {
/*
* Turn off MCR_IENABLE for all likely serial ports. An unused
* port with its MCR_IENABLE gate open will inhibit interrupts
* from any used port that shares the interrupt vector.
* XXX the gate enable is elsewhere for some multiports.
*/
device_t *devs;
int count, i;
devclass_get_devices(sio_devclass, &devs, &count);
for (i = 0; i < count; i++) {
xdev = devs[i];
if (device_is_enabled(xdev))
outb(isa_get_port(xdev) + com_mcr, 0);
}
free(devs, M_TEMP);
already_init = TRUE;
}
if (COM_LLCONSOLE(flags)) {
printf("sio%d: reserved for low-level i/o\n",
device_get_unit(dev));
return (ENXIO);
}
/*
* If the device is on a multiport card and has an AST/4
* compatible interrupt control register, initialize this
* register and prepare to leave MCR_IENABLE clear in the mcr.
* Otherwise, prepare to set MCR_IENABLE in the mcr.
* Point idev to the device struct giving the correct id_irq.
* This is the struct for the master device if there is one.
*/
idev = dev;
mcr_image = MCR_IENABLE;
#ifdef COM_MULTIPORT
if (COM_ISMULTIPORT(flags)) {
idev = devclass_get_device(sio_devclass, COM_MPMASTER(flags));
if (idev == NULL) {
printf("sio%d: master device %d not configured\n",
device_get_unit(dev), COM_MPMASTER(flags));
idev = dev;
}
if (!COM_NOTAST4(flags)) {
outb(isa_get_port(idev) + com_scr,
isa_get_irq(idev) >= 0 ? 0x80 : 0);
mcr_image = 0;
}
}
#endif /* COM_MULTIPORT */
if (isa_get_irq(idev) < 0)
mcr_image = 0;
bzero(failures, sizeof failures);
iobase = rman_get_start(port);
/*
* We don't want to get actual interrupts, just masked ones.
* Interrupts from this line should already be masked in the ICU,
* but mask them in the processor as well in case there are some
* (misconfigured) shared interrupts.
*/
disable_intr();
/* EXTRA DELAY? */
/*
* Initialize the speed and the word size and wait long enough to
* drain the maximum of 16 bytes of junk in device output queues.
* The speed is undefined after a master reset and must be set
* before relying on anything related to output. There may be
* junk after a (very fast) soft reboot and (apparently) after
* master reset.
* XXX what about the UART bug avoided by waiting in comparam()?
* We don't want to to wait long enough to drain at 2 bps.
*/
if (iobase == siocniobase)
DELAY((16 + 1) * 1000000 / (comdefaultrate / 10));
else {
outb(iobase + com_cfcr, CFCR_DLAB | CFCR_8BITS);
outb(iobase + com_dlbl, COMBRD(SIO_TEST_SPEED) & 0xff);
outb(iobase + com_dlbh, (u_int) COMBRD(SIO_TEST_SPEED) >> 8);
outb(iobase + com_cfcr, CFCR_8BITS);
DELAY((16 + 1) * 1000000 / (SIO_TEST_SPEED / 10));
}
/*
* Enable the interrupt gate and disable device interupts. This
* should leave the device driving the interrupt line low and
* guarantee an edge trigger if an interrupt can be generated.
*/
/* EXTRA DELAY? */
outb(iobase + com_mcr, mcr_image);
outb(iobase + com_ier, 0);
DELAY(1000); /* XXX */
irqmap[0] = isa_irq_pending();
/*
* Attempt to set loopback mode so that we can send a null byte
* without annoying any external device.
*/
/* EXTRA DELAY? */
outb(iobase + com_mcr, mcr_image | MCR_LOOPBACK);
/*
* Attempt to generate an output interrupt. On 8250's, setting
* IER_ETXRDY generates an interrupt independent of the current
* setting and independent of whether the THR is empty. On 16450's,
* setting IER_ETXRDY generates an interrupt independent of the
* current setting. On 16550A's, setting IER_ETXRDY only
* generates an interrupt when IER_ETXRDY is not already set.
*/
outb(iobase + com_ier, IER_ETXRDY);
/*
* On some 16x50 incompatibles, setting IER_ETXRDY doesn't generate
* an interrupt. They'd better generate one for actually doing
* output. Loopback may be broken on the same incompatibles but
* it's unlikely to do more than allow the null byte out.
*/
outb(iobase + com_data, 0);
DELAY((1 + 2) * 1000000 / (SIO_TEST_SPEED / 10));
/*
* Turn off loopback mode so that the interrupt gate works again
* (MCR_IENABLE was hidden). This should leave the device driving
* an interrupt line high. It doesn't matter if the interrupt
* line oscillates while we are not looking at it, since interrupts
* are disabled.
*/
/* EXTRA DELAY? */
outb(iobase + com_mcr, mcr_image);
/*
* It's a definitly Serial PCMCIA(16550A), but still be required
* for IIR_TXRDY implementation ( Palido 321s, DC-1S... )
*/
if ( COM_NOPROBE(flags) ) {
/* Reading IIR register twice */
for ( fn = 0; fn < 2; fn ++ ) {
DELAY(10000);
failures[6] = inb(iobase + com_iir);
}
/* Check IIR_TXRDY clear ? */
result = 0;
if ( failures[6] & IIR_TXRDY ) {
/* Nop, Double check with clearing IER */
outb(iobase + com_ier, 0);
if ( inb(iobase + com_iir) & IIR_NOPEND ) {
/* Ok. we're familia this gang */
SET_FLAG(dev, COM_C_IIR_TXRDYBUG); /* Set IIR_TXRDYBUG */
} else {
/* Unknown, Just omit this chip.. XXX */
result = ENXIO;
}
} else {
/* OK. this is well-known guys */
CLR_FLAG(dev, COM_C_IIR_TXRDYBUG); /*Clear IIR_TXRDYBUG*/
}
outb(iobase + com_cfcr, CFCR_8BITS);
enable_intr();
bus_release_resource(dev, SYS_RES_IOPORT, rid, port);
return (iobase == siocniobase ? 0 : result);
}
/*
* Check that
* o the CFCR, IER and MCR in UART hold the values written to them
* (the values happen to be all distinct - this is good for
* avoiding false positive tests from bus echoes).
* o an output interrupt is generated and its vector is correct.
* o the interrupt goes away when the IIR in the UART is read.
*/
/* EXTRA DELAY? */
failures[0] = inb(iobase + com_cfcr) - CFCR_8BITS;
failures[1] = inb(iobase + com_ier) - IER_ETXRDY;
failures[2] = inb(iobase + com_mcr) - mcr_image;
DELAY(10000); /* Some internal modems need this time */
irqmap[1] = isa_irq_pending();
failures[4] = (inb(iobase + com_iir) & IIR_IMASK) - IIR_TXRDY;
DELAY(1000); /* XXX */
irqmap[2] = isa_irq_pending();
failures[6] = (inb(iobase + com_iir) & IIR_IMASK) - IIR_NOPEND;
/*
* Turn off all device interrupts and check that they go off properly.
* Leave MCR_IENABLE alone. For ports without a master port, it gates
* the OUT2 output of the UART to
* the ICU input. Closing the gate would give a floating ICU input
* (unless there is another device driving it) and spurious interrupts.
* (On the system that this was first tested on, the input floats high
* and gives a (masked) interrupt as soon as the gate is closed.)
*/
outb(iobase + com_ier, 0);
outb(iobase + com_cfcr, CFCR_8BITS); /* dummy to avoid bus echo */
failures[7] = inb(iobase + com_ier);
DELAY(1000); /* XXX */
irqmap[3] = isa_irq_pending();
failures[9] = (inb(iobase + com_iir) & IIR_IMASK) - IIR_NOPEND;
enable_intr();
irqs = irqmap[1] & ~irqmap[0];
if (isa_get_irq(idev) >= 0 && ((1 << isa_get_irq(idev)) & irqs) == 0)
printf(
"sio%d: configured irq %d not in bitmap of probed irqs %#x\n",
device_get_unit(dev), isa_get_irq(idev), irqs);
if (bootverbose)
printf("sio%d: irq maps: %#x %#x %#x %#x\n",
device_get_unit(dev),
irqmap[0], irqmap[1], irqmap[2], irqmap[3]);
result = 0;
for (fn = 0; fn < sizeof failures; ++fn)
if (failures[fn]) {
outb(iobase + com_mcr, 0);
result = ENXIO;
if (bootverbose) {
printf("sio%d: probe failed test(s):",
device_get_unit(dev));
for (fn = 0; fn < sizeof failures; ++fn)
if (failures[fn])
printf(" %d", fn);
printf("\n");
}
break;
}
bus_release_resource(dev, SYS_RES_IOPORT, rid, port);
return (iobase == siocniobase ? 0 : result);
}
#ifdef COM_ESP
static int
espattach(com, esp_port)
struct com_s *com;
Port_t esp_port;
{
u_char dips;
u_char val;
/*
* Check the ESP-specific I/O port to see if we're an ESP
* card. If not, return failure immediately.
*/
if ((inb(esp_port) & 0xf3) == 0) {
printf(" port 0x%x is not an ESP board?\n", esp_port);
return (0);
}
/*
* We've got something that claims to be a Hayes ESP card.
* Let's hope so.
*/
/* Get the dip-switch configuration */
outb(esp_port + ESP_CMD1, ESP_GETDIPS);
dips = inb(esp_port + ESP_STATUS1);
/*
* Bits 0,1 of dips say which COM port we are.
*/
if (com->iobase == likely_com_ports[dips & 0x03])
printf(" : ESP");
else {
printf(" esp_port has com %d\n", dips & 0x03);
return (0);
}
/*
* Check for ESP version 2.0 or later: bits 4,5,6 = 010.
*/
outb(esp_port + ESP_CMD1, ESP_GETTEST);
val = inb(esp_port + ESP_STATUS1); /* clear reg 1 */
val = inb(esp_port + ESP_STATUS2);
if ((val & 0x70) < 0x20) {
printf("-old (%o)", val & 0x70);
return (0);
}
/*
* Check for ability to emulate 16550: bit 7 == 1
*/
if ((dips & 0x80) == 0) {
printf(" slave");
return (0);
}
/*
* Okay, we seem to be a Hayes ESP card. Whee.
*/
com->esp = TRUE;
com->esp_port = esp_port;
return (1);
}
#endif /* COM_ESP */
static int
sioattach(dev)
device_t dev;
{
struct com_s *com;
#ifdef COM_ESP
Port_t *espp;
#endif
Port_t iobase;
int unit;
void *ih;
u_int flags = device_get_flags(dev);
int rid;
struct resource *port;
rid = 0;
port = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid,
0, ~0, IO_COMSIZE, RF_ACTIVE);
if (!port)
return ENXIO;
iobase = rman_get_start(port);
unit = device_get_unit(dev);
com = device_get_softc(dev);
/*
* sioprobe() has initialized the device registers as follows:
* o cfcr = CFCR_8BITS.
* It is most important that CFCR_DLAB is off, so that the
* data port is not hidden when we enable interrupts.
* o ier = 0.
* Interrupts are only enabled when the line is open.
* o mcr = MCR_IENABLE, or 0 if the port has AST/4 compatible
* interrupt control register or the config specifies no irq.
* Keeping MCR_DTR and MCR_RTS off might stop the external
* device from sending before we are ready.
*/
bzero(com, sizeof *com);
com->unit = unit;
com->ioportres = port;
com->cfcr_image = CFCR_8BITS;
com->dtr_wait = 3 * hz;
com->loses_outints = COM_LOSESOUTINTS(flags) != 0;
com->no_irq = isa_get_irq(dev) < 0;
com->tx_fifo_size = 1;
com->obufs[0].l_head = com->obuf1;
com->obufs[1].l_head = com->obuf2;
com->iobase = iobase;
com->data_port = iobase + com_data;
com->int_id_port = iobase + com_iir;
com->modem_ctl_port = iobase + com_mcr;
com->mcr_image = inb(com->modem_ctl_port);
com->line_status_port = iobase + com_lsr;
com->modem_status_port = iobase + com_msr;
com->intr_ctl_port = iobase + com_ier;
/*
* We don't use all the flags from <sys/ttydefaults.h> since they
* are only relevant for logins. It's important to have echo off
* initially so that the line doesn't start blathering before the
* echo flag can be turned off.
*/
com->it_in.c_iflag = 0;
com->it_in.c_oflag = 0;
com->it_in.c_cflag = TTYDEF_CFLAG;
com->it_in.c_lflag = 0;
if (unit == comconsole) {
com->it_in.c_iflag = TTYDEF_IFLAG;
com->it_in.c_oflag = TTYDEF_OFLAG;
com->it_in.c_cflag = TTYDEF_CFLAG | CLOCAL;
com->it_in.c_lflag = TTYDEF_LFLAG;
com->lt_out.c_cflag = com->lt_in.c_cflag = CLOCAL;
com->lt_out.c_ispeed = com->lt_out.c_ospeed =
com->lt_in.c_ispeed = com->lt_in.c_ospeed =
com->it_in.c_ispeed = com->it_in.c_ospeed = comdefaultrate;
} else
com->it_in.c_ispeed = com->it_in.c_ospeed = TTYDEF_SPEED;
if (siosetwater(com, com->it_in.c_ispeed) != 0) {
enable_intr();
free(com, M_DEVBUF);
return (0);
}
enable_intr();
termioschars(&com->it_in);
com->it_out = com->it_in;
/* attempt to determine UART type */
printf("sio%d: type", unit);
#ifdef COM_MULTIPORT
if (!COM_ISMULTIPORT(flags) && !COM_IIR_TXRDYBUG(flags))
#else
if (!COM_IIR_TXRDYBUG(flags))
#endif
{
u_char scr;
u_char scr1;
u_char scr2;
scr = inb(iobase + com_scr);
outb(iobase + com_scr, 0xa5);
scr1 = inb(iobase + com_scr);
outb(iobase + com_scr, 0x5a);
scr2 = inb(iobase + com_scr);
outb(iobase + com_scr, scr);
if (scr1 != 0xa5 || scr2 != 0x5a) {
printf(" 8250");
goto determined_type;
}
}
outb(iobase + com_fifo, FIFO_ENABLE | FIFO_RX_HIGH);
DELAY(100);
com->st16650a = 0;
switch (inb(com->int_id_port) & IIR_FIFO_MASK) {
case FIFO_RX_LOW:
printf(" 16450");
break;
case FIFO_RX_MEDL:
printf(" 16450?");
break;
case FIFO_RX_MEDH:
printf(" 16550?");
break;
case FIFO_RX_HIGH:
if (COM_NOFIFO(flags)) {
printf(" 16550A fifo disabled");
} else {
com->hasfifo = TRUE;
if (COM_ST16650A(flags)) {
com->st16650a = 1;
com->tx_fifo_size = 32;
printf(" ST16650A");
} else {
com->tx_fifo_size = COM_FIFOSIZE(flags);
printf(" 16550A");
}
}
#ifdef COM_ESP
for (espp = likely_esp_ports; *espp != 0; espp++)
if (espattach(com, *espp)) {
com->tx_fifo_size = 1024;
break;
}
#endif
if (!com->st16650a) {
if (!com->tx_fifo_size)
com->tx_fifo_size = 16;
else
printf(" lookalike with %d bytes FIFO",
com->tx_fifo_size);
}
break;
}
#ifdef COM_ESP
if (com->esp) {
/*
* Set 16550 compatibility mode.
* We don't use the ESP_MODE_SCALE bit to increase the
* fifo trigger levels because we can't handle large
* bursts of input.
* XXX flow control should be set in comparam(), not here.
*/
outb(com->esp_port + ESP_CMD1, ESP_SETMODE);
outb(com->esp_port + ESP_CMD2, ESP_MODE_RTS | ESP_MODE_FIFO);
/* Set RTS/CTS flow control. */
outb(com->esp_port + ESP_CMD1, ESP_SETFLOWTYPE);
outb(com->esp_port + ESP_CMD2, ESP_FLOW_RTS);
outb(com->esp_port + ESP_CMD2, ESP_FLOW_CTS);
/* Set flow-control levels. */
outb(com->esp_port + ESP_CMD1, ESP_SETRXFLOW);
outb(com->esp_port + ESP_CMD2, HIBYTE(768));
outb(com->esp_port + ESP_CMD2, LOBYTE(768));
outb(com->esp_port + ESP_CMD2, HIBYTE(512));
outb(com->esp_port + ESP_CMD2, LOBYTE(512));
}
#endif /* COM_ESP */
outb(iobase + com_fifo, 0);
determined_type: ;
#ifdef COM_MULTIPORT
if (COM_ISMULTIPORT(flags)) {
com->multiport = TRUE;
printf(" (multiport");
if (unit == COM_MPMASTER(flags))
printf(" master");
printf(")");
com->no_irq =
isa_get_irq(devclass_get_device
(sio_devclass, COM_MPMASTER(flags))) < 0;
}
#endif /* COM_MULTIPORT */
if (unit == comconsole)
printf(", console");
if ( COM_IIR_TXRDYBUG(flags) )
printf(" with a bogus IIR_TXRDY register");
printf("\n");
if (!sio_registered) {
register_swi(SWI_TTY, siopoll);
sio_registered = TRUE;
}
make_dev(&sio_cdevsw, unit,
UID_ROOT, GID_WHEEL, 0600, "ttyd%r", unit);
make_dev(&sio_cdevsw, unit | CONTROL_INIT_STATE,
UID_ROOT, GID_WHEEL, 0600, "ttyid%r", unit);
make_dev(&sio_cdevsw, unit | CONTROL_LOCK_STATE,
UID_ROOT, GID_WHEEL, 0600, "ttyld%r", unit);
make_dev(&sio_cdevsw, unit | CALLOUT_MASK,
UID_UUCP, GID_DIALER, 0660, "cuaa%r", unit);
make_dev(&sio_cdevsw, unit | CALLOUT_MASK | CONTROL_INIT_STATE,
UID_UUCP, GID_DIALER, 0660, "cuaia%r", unit);
make_dev(&sio_cdevsw, unit | CALLOUT_MASK | CONTROL_LOCK_STATE,
UID_UUCP, GID_DIALER, 0660, "cuala%r", unit);
com->flags = flags;
com->pps.ppscap = PPS_CAPTUREASSERT | PPS_CAPTURECLEAR;
pps_init(&com->pps);
rid = 0;
com->irqres = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, 0ul, ~0ul, 1,
RF_SHAREABLE | RF_ACTIVE);
BUS_SETUP_INTR(device_get_parent(dev), dev, com->irqres,
INTR_TYPE_TTY | INTR_TYPE_FAST,
siointr, com, &ih);
return (0);
}
static int
sioopen(dev, flag, mode, p)
dev_t dev;
int flag;
int mode;
struct proc *p;
{
struct com_s *com;
int error;
Port_t iobase;
int mynor;
int s;
struct tty *tp;
int unit;
mynor = minor(dev);
unit = MINOR_TO_UNIT(mynor);
if ((u_int) unit >= NSIOTOT || (com = com_addr(unit)) == NULL)
return (ENXIO);
if (com->gone)
return (ENXIO);
if (mynor & CONTROL_MASK)
return (0);
tp = dev->si_tty = com->tp = ttymalloc(com->tp);
s = spltty();
/*
* We jump to this label after all non-interrupted sleeps to pick
* up any changes of the device state.
*/
open_top:
while (com->state & CS_DTR_OFF) {
error = tsleep(&com->dtr_wait, TTIPRI | PCATCH, "siodtr", 0);
if (com_addr(unit) == NULL)
return (ENXIO);
if (error != 0 || com->gone)
goto out;
}
if (tp->t_state & TS_ISOPEN) {
/*
* The device is open, so everything has been initialized.
* Handle conflicts.
*/
if (mynor & CALLOUT_MASK) {
if (!com->active_out) {
error = EBUSY;
goto out;
}
} else {
if (com->active_out) {
if (flag & O_NONBLOCK) {
error = EBUSY;
goto out;
}
error = tsleep(&com->active_out,
TTIPRI | PCATCH, "siobi", 0);
if (com_addr(unit) == NULL)
return (ENXIO);
if (error != 0 || com->gone)
goto out;
goto open_top;
}
}
if (tp->t_state & TS_XCLUDE &&
suser(p)) {
error = EBUSY;
goto out;
}
} else {
/*
* The device isn't open, so there are no conflicts.
* Initialize it. Initialization is done twice in many
* cases: to preempt sleeping callin opens if we are
* callout, and to complete a callin open after DCD rises.
*/
tp->t_oproc = comstart;
tp->t_param = comparam;
tp->t_stop = comstop;
tp->t_dev = dev;
tp->t_termios = mynor & CALLOUT_MASK
? com->it_out : com->it_in;
(void)commctl(com, TIOCM_DTR | TIOCM_RTS, DMSET);
com->poll = com->no_irq;
com->poll_output = com->loses_outints;
++com->wopeners;
error = comparam(tp, &tp->t_termios);
--com->wopeners;
if (error != 0)
goto out;
/*
* XXX we should goto open_top if comparam() slept.
*/
iobase = com->iobase;
if (com->hasfifo) {
/*
* (Re)enable and drain fifos.
*
* Certain SMC chips cause problems if the fifos
* are enabled while input is ready. Turn off the
* fifo if necessary to clear the input. We test
* the input ready bit after enabling the fifos
* since we've already enabled them in comparam()
* and to handle races between enabling and fresh
* input.
*/
while (TRUE) {
outb(iobase + com_fifo,
FIFO_RCV_RST | FIFO_XMT_RST
| com->fifo_image);
/*
* XXX the delays are for superstitious
* historical reasons. It must be less than
* the character time at the maximum
* supported speed (87 usec at 115200 bps
* 8N1). Otherwise we might loop endlessly
* if data is streaming in. We used to use
* delays of 100. That usually worked
* because DELAY(100) used to usually delay
* for about 85 usec instead of 100.
*/
DELAY(50);
if (!(inb(com->line_status_port) & LSR_RXRDY))
break;
outb(iobase + com_fifo, 0);
DELAY(50);
(void) inb(com->data_port);
}
}
disable_intr();
(void) inb(com->line_status_port);
(void) inb(com->data_port);
com->prev_modem_status = com->last_modem_status
= inb(com->modem_status_port);
if (COM_IIR_TXRDYBUG(com->flags)) {
outb(com->intr_ctl_port, IER_ERXRDY | IER_ERLS
| IER_EMSC);
} else {
outb(com->intr_ctl_port, IER_ERXRDY | IER_ETXRDY
| IER_ERLS | IER_EMSC);
}
enable_intr();
/*
* Handle initial DCD. Callout devices get a fake initial
* DCD (trapdoor DCD). If we are callout, then any sleeping
* callin opens get woken up and resume sleeping on "siobi"
* instead of "siodcd".
*/
/*
* XXX `mynor & CALLOUT_MASK' should be
* `tp->t_cflag & (SOFT_CARRIER | TRAPDOOR_CARRIER) where
* TRAPDOOR_CARRIER is the default initial state for callout
* devices and SOFT_CARRIER is like CLOCAL except it hides
* the true carrier.
*/
if (com->prev_modem_status & MSR_DCD || mynor & CALLOUT_MASK)
(*linesw[tp->t_line].l_modem)(tp, 1);
}
/*
* Wait for DCD if necessary.
*/
if (!(tp->t_state & TS_CARR_ON) && !(mynor & CALLOUT_MASK)
&& !(tp->t_cflag & CLOCAL) && !(flag & O_NONBLOCK)) {
++com->wopeners;
error = tsleep(TSA_CARR_ON(tp), TTIPRI | PCATCH, "siodcd", 0);
if (com_addr(unit) == NULL)
return (ENXIO);
--com->wopeners;
if (error != 0 || com->gone)
goto out;
goto open_top;
}
error = (*linesw[tp->t_line].l_open)(dev, tp);
disc_optim(tp, &tp->t_termios, com);
if (tp->t_state & TS_ISOPEN && mynor & CALLOUT_MASK)
com->active_out = TRUE;
siosettimeout();
out:
splx(s);
if (!(tp->t_state & TS_ISOPEN) && com->wopeners == 0)
comhardclose(com);
return (error);
}
static int
sioclose(dev, flag, mode, p)
dev_t dev;
int flag;
int mode;
struct proc *p;
{
struct com_s *com;
int mynor;
int s;
struct tty *tp;
mynor = minor(dev);
if (mynor & CONTROL_MASK)
return (0);
com = com_addr(MINOR_TO_UNIT(mynor));
tp = com->tp;
s = spltty();
(*linesw[tp->t_line].l_close)(tp, flag);
disc_optim(tp, &tp->t_termios, com);
comstop(tp, FREAD | FWRITE);
comhardclose(com);
ttyclose(tp);
siosettimeout();
splx(s);
if (com->gone) {
printf("sio%d: gone\n", com->unit);
s = spltty();
if (com->ibuf != NULL)
free(com->ibuf, M_DEVBUF);
bzero(tp, sizeof *tp);
free(com, M_DEVBUF);
splx(s);
}
return (0);
}
static void
comhardclose(com)
struct com_s *com;
{
Port_t iobase;
int s;
struct tty *tp;
int unit;
unit = com->unit;
iobase = com->iobase;
s = spltty();
com->poll = FALSE;
com->poll_output = FALSE;
com->do_timestamp = FALSE;
com->do_dcd_timestamp = FALSE;
com->pps.ppsparam.mode = 0;
outb(iobase + com_cfcr, com->cfcr_image &= ~CFCR_SBREAK);
{
outb(iobase + com_ier, 0);
tp = com->tp;
if (tp->t_cflag & HUPCL
/*
* XXX we will miss any carrier drop between here and the
* next open. Perhaps we should watch DCD even when the
* port is closed; it is not sufficient to check it at
* the next open because it might go up and down while
* we're not watching.
*/
|| (!com->active_out
&& !(com->prev_modem_status & MSR_DCD)
&& !(com->it_in.c_cflag & CLOCAL))
|| !(tp->t_state & TS_ISOPEN)) {
(void)commctl(com, TIOCM_DTR, DMBIC);
if (com->dtr_wait != 0 && !(com->state & CS_DTR_OFF)) {
timeout(siodtrwakeup, com, com->dtr_wait);
com->state |= CS_DTR_OFF;
}
}
}
if (com->hasfifo) {
/*
* Disable fifos so that they are off after controlled
* reboots. Some BIOSes fail to detect 16550s when the
* fifos are enabled.
*/
outb(iobase + com_fifo, 0);
}
com->active_out = FALSE;
wakeup(&com->active_out);
wakeup(TSA_CARR_ON(tp)); /* restart any wopeners */
splx(s);
}
static int
sioread(dev, uio, flag)
dev_t dev;
struct uio *uio;
int flag;
{
int mynor;
struct com_s *com;
mynor = minor(dev);
if (mynor & CONTROL_MASK)
return (ENODEV);
com = com_addr(MINOR_TO_UNIT(mynor));
if (com->gone)
return (ENODEV);
return ((*linesw[com->tp->t_line].l_read)(com->tp, uio, flag));
}
static int
siowrite(dev, uio, flag)
dev_t dev;
struct uio *uio;
int flag;
{
int mynor;
struct com_s *com;
int unit;
mynor = minor(dev);
if (mynor & CONTROL_MASK)
return (ENODEV);
unit = MINOR_TO_UNIT(mynor);
com = com_addr(unit);
if (com->gone)
return (ENODEV);
/*
* (XXX) We disallow virtual consoles if the physical console is
* a serial port. This is in case there is a display attached that
* is not the console. In that situation we don't need/want the X
* server taking over the console.
*/
if (constty != NULL && unit == comconsole)
constty = NULL;
return ((*linesw[com->tp->t_line].l_write)(com->tp, uio, flag));
}
static void
siobusycheck(chan)
void *chan;
{
struct com_s *com;
int s;
com = (struct com_s *)chan;
/*
* Clear TS_BUSY if low-level output is complete.
* spl locking is sufficient because siointr1() does not set CS_BUSY.
* If siointr1() clears CS_BUSY after we look at it, then we'll get
* called again. Reading the line status port outside of siointr1()
* is safe because CS_BUSY is clear so there are no output interrupts
* to lose.
*/
s = spltty();
if (com->state & CS_BUSY)
com->extra_state &= ~CSE_BUSYCHECK; /* False alarm. */
else if ((inb(com->line_status_port) & (LSR_TSRE | LSR_TXRDY))
== (LSR_TSRE | LSR_TXRDY)) {
com->tp->t_state &= ~TS_BUSY;
ttwwakeup(com->tp);
com->extra_state &= ~CSE_BUSYCHECK;
} else
timeout(siobusycheck, com, hz / 100);
splx(s);
}
static void
siodtrwakeup(chan)
void *chan;
{
struct com_s *com;
com = (struct com_s *)chan;
com->state &= ~CS_DTR_OFF;
wakeup(&com->dtr_wait);
}
static void
sioinput(com)
struct com_s *com;
{
u_char *buf;
int incc;
u_char line_status;
int recv_data;
struct tty *tp;
buf = com->ibuf;
tp = com->tp;
if (!(tp->t_state & TS_ISOPEN) || !(tp->t_cflag & CREAD)) {
com_events -= (com->iptr - com->ibuf);
com->iptr = com->ibuf;
return;
}
if (tp->t_state & TS_CAN_BYPASS_L_RINT) {
/*
* Avoid the grotesquely inefficient lineswitch routine
* (ttyinput) in "raw" mode. It usually takes about 450
* instructions (that's without canonical processing or echo!).
* slinput is reasonably fast (usually 40 instructions plus
* call overhead).
*/
do {
enable_intr();
incc = com->iptr - buf;
if (tp->t_rawq.c_cc + incc > tp->t_ihiwat
&& (com->state & CS_RTS_IFLOW
|| tp->t_iflag & IXOFF)
&& !(tp->t_state & TS_TBLOCK))
ttyblock(tp);
com->delta_error_counts[CE_TTY_BUF_OVERFLOW]
+= b_to_q((char *)buf, incc, &tp->t_rawq);
buf += incc;
tk_nin += incc;
tk_rawcc += incc;
tp->t_rawcc += incc;
ttwakeup(tp);
if (tp->t_state & TS_TTSTOP
&& (tp->t_iflag & IXANY
|| tp->t_cc[VSTART] == tp->t_cc[VSTOP])) {
tp->t_state &= ~TS_TTSTOP;
tp->t_lflag &= ~FLUSHO;
comstart(tp);
}
disable_intr();
} while (buf < com->iptr);
} else {
do {
enable_intr();
line_status = buf[com->ierroff];
recv_data = *buf++;
if (line_status
& (LSR_BI | LSR_FE | LSR_OE | LSR_PE)) {
if (line_status & LSR_BI)
recv_data |= TTY_BI;
if (line_status & LSR_FE)
recv_data |= TTY_FE;
if (line_status & LSR_OE)
recv_data |= TTY_OE;
if (line_status & LSR_PE)
recv_data |= TTY_PE;
}
(*linesw[tp->t_line].l_rint)(recv_data, tp);
disable_intr();
} while (buf < com->iptr);
}
com_events -= (com->iptr - com->ibuf);
com->iptr = com->ibuf;
/*
* There is now room for another low-level buffer full of input,
* so enable RTS if it is now disabled and there is room in the
* high-level buffer.
*/
if ((com->state & CS_RTS_IFLOW) && !(com->mcr_image & MCR_RTS) &&
!(tp->t_state & TS_TBLOCK))
outb(com->modem_ctl_port, com->mcr_image |= MCR_RTS);
}
void
siointr(arg)
void *arg;
{
#ifndef COM_MULTIPORT
COM_LOCK();
siointr1((struct com_s *) arg);
COM_UNLOCK();
#else /* COM_MULTIPORT */
bool_t possibly_more_intrs;
int unit;
struct com_s *com;
/*
* Loop until there is no activity on any port. This is necessary
* to get an interrupt edge more than to avoid another interrupt.
* If the IRQ signal is just an OR of the IRQ signals from several
* devices, then the edge from one may be lost because another is
* on.
*/
COM_LOCK();
do {
possibly_more_intrs = FALSE;
for (unit = 0; unit < NSIOTOT; ++unit) {
com = com_addr(unit);
/*
* XXX COM_LOCK();
* would it work here, or be counter-productive?
*/
if (com != NULL
&& !com->gone
&& (inb(com->int_id_port) & IIR_IMASK)
!= IIR_NOPEND) {
siointr1(com);
possibly_more_intrs = TRUE;
}
/* XXX COM_UNLOCK(); */
}
} while (possibly_more_intrs);
COM_UNLOCK();
#endif /* COM_MULTIPORT */
}
static void
siointr1(com)
struct com_s *com;
{
u_char line_status;
u_char modem_status;
u_char *ioptr;
u_char recv_data;
u_char int_ctl;
u_char int_ctl_new;
struct timecounter *tc;
u_int count;
int_ctl = inb(com->intr_ctl_port);
int_ctl_new = int_ctl;
while (!com->gone) {
if (com->pps.ppsparam.mode & PPS_CAPTUREBOTH) {
modem_status = inb(com->modem_status_port);
if ((modem_status ^ com->last_modem_status) & MSR_DCD) {
tc = timecounter;
count = tc->tc_get_timecount(tc);
pps_event(&com->pps, tc, count,
(modem_status & MSR_DCD) ?
PPS_CAPTUREASSERT : PPS_CAPTURECLEAR);
}
}
line_status = inb(com->line_status_port);
/* input event? (check first to help avoid overruns) */
while (line_status & LSR_RCV_MASK) {
/* break/unnattached error bits or real input? */
if (!(line_status & LSR_RXRDY))
recv_data = 0;
else
recv_data = inb(com->data_port);
if (line_status & (LSR_BI | LSR_FE | LSR_PE)) {
/*
* Don't store BI if IGNBRK or FE/PE if IGNPAR.
* Otherwise, push the work to a higher level
* (to handle PARMRK) if we're bypassing.
* Otherwise, convert BI/FE and PE+INPCK to 0.
*
* This makes bypassing work right in the
* usual "raw" case (IGNBRK set, and IGNPAR
* and INPCK clear).
*
* Note: BI together with FE/PE means just BI.
*/
if (line_status & LSR_BI) {
#if defined(DDB) && defined(BREAK_TO_DEBUGGER)
if (com->unit == comconsole) {
breakpoint();
goto cont;
}
#endif
if (com->tp == NULL
|| com->tp->t_iflag & IGNBRK)
goto cont;
} else {
if (com->tp == NULL
|| com->tp->t_iflag & IGNPAR)
goto cont;
}
if (com->tp->t_state & TS_CAN_BYPASS_L_RINT
&& (line_status & (LSR_BI | LSR_FE)
|| com->tp->t_iflag & INPCK))
recv_data = 0;
}
++com->bytes_in;
if (com->hotchar != 0 && recv_data == com->hotchar)
setsofttty();
ioptr = com->iptr;
if (ioptr >= com->ibufend)
CE_RECORD(com, CE_INTERRUPT_BUF_OVERFLOW);
else {
if (com->do_timestamp)
microtime(&com->timestamp);
++com_events;
schedsofttty();
#if 0 /* for testing input latency vs efficiency */
if (com->iptr - com->ibuf == 8)
setsofttty();
#endif
ioptr[0] = recv_data;
ioptr[com->ierroff] = line_status;
com->iptr = ++ioptr;
if (ioptr == com->ihighwater
&& com->state & CS_RTS_IFLOW)
outb(com->modem_ctl_port,
com->mcr_image &= ~MCR_RTS);
if (line_status & LSR_OE)
CE_RECORD(com, CE_OVERRUN);
}
cont:
/*
* "& 0x7F" is to avoid the gcc-1.40 generating a slow
* jump from the top of the loop to here
*/
line_status = inb(com->line_status_port) & 0x7F;
}
/* modem status change? (always check before doing output) */
modem_status = inb(com->modem_status_port);
if (modem_status != com->last_modem_status) {
if (com->do_dcd_timestamp
&& !(com->last_modem_status & MSR_DCD)
&& modem_status & MSR_DCD)
microtime(&com->dcd_timestamp);
/*
* Schedule high level to handle DCD changes. Note
* that we don't use the delta bits anywhere. Some
* UARTs mess them up, and it's easy to remember the
* previous bits and calculate the delta.
*/
com->last_modem_status = modem_status;
if (!(com->state & CS_CHECKMSR)) {
com_events += LOTS_OF_EVENTS;
com->state |= CS_CHECKMSR;
setsofttty();
}
/* handle CTS change immediately for crisp flow ctl */
if (com->state & CS_CTS_OFLOW) {
if (modem_status & MSR_CTS)
com->state |= CS_ODEVREADY;
else
com->state &= ~CS_ODEVREADY;
}
}
/* output queued and everything ready? */
if (line_status & LSR_TXRDY
&& com->state >= (CS_BUSY | CS_TTGO | CS_ODEVREADY)) {
ioptr = com->obufq.l_head;
if (com->tx_fifo_size > 1) {
u_int ocount;
ocount = com->obufq.l_tail - ioptr;
if (ocount > com->tx_fifo_size)
ocount = com->tx_fifo_size;
com->bytes_out += ocount;
do
outb(com->data_port, *ioptr++);
while (--ocount != 0);
} else {
outb(com->data_port, *ioptr++);
++com->bytes_out;
}
com->obufq.l_head = ioptr;
if (COM_IIR_TXRDYBUG(com->flags)) {
int_ctl_new = int_ctl | IER_ETXRDY;
}
if (ioptr >= com->obufq.l_tail) {
struct lbq *qp;
qp = com->obufq.l_next;
qp->l_queued = FALSE;
qp = qp->l_next;
if (qp != NULL) {
com->obufq.l_head = qp->l_head;
com->obufq.l_tail = qp->l_tail;
com->obufq.l_next = qp;
} else {
/* output just completed */
if ( COM_IIR_TXRDYBUG(com->flags) ) {
int_ctl_new = int_ctl & ~IER_ETXRDY;
}
com->state &= ~CS_BUSY;
}
if (!(com->state & CS_ODONE)) {
com_events += LOTS_OF_EVENTS;
com->state |= CS_ODONE;
setsofttty(); /* handle at high level ASAP */
}
}
if ( COM_IIR_TXRDYBUG(com->flags) && (int_ctl != int_ctl_new)) {
outb(com->intr_ctl_port, int_ctl_new);
}
}
/* finished? */
#ifndef COM_MULTIPORT
if ((inb(com->int_id_port) & IIR_IMASK) == IIR_NOPEND)
#endif /* COM_MULTIPORT */
return;
}
}
static int
sioioctl(dev, cmd, data, flag, p)
dev_t dev;
u_long cmd;
caddr_t data;
int flag;
struct proc *p;
{
struct com_s *com;
int error;
Port_t iobase;
int mynor;
int s;
struct tty *tp;
#if defined(COMPAT_43) || defined(COMPAT_SUNOS)
u_long oldcmd;
struct termios term;
#endif
mynor = minor(dev);
com = com_addr(MINOR_TO_UNIT(mynor));
if (com->gone)
return (ENODEV);
iobase = com->iobase;
if (mynor & CONTROL_MASK) {
struct termios *ct;
switch (mynor & CONTROL_MASK) {
case CONTROL_INIT_STATE:
ct = mynor & CALLOUT_MASK ? &com->it_out : &com->it_in;
break;
case CONTROL_LOCK_STATE:
ct = mynor & CALLOUT_MASK ? &com->lt_out : &com->lt_in;
break;
default:
return (ENODEV); /* /dev/nodev */
}
switch (cmd) {
case TIOCSETA:
error = suser(p);
if (error != 0)
return (error);
*ct = *(struct termios *)data;
return (0);
case TIOCGETA:
*(struct termios *)data = *ct;
return (0);
case TIOCGETD:
*(int *)data = TTYDISC;
return (0);
case TIOCGWINSZ:
bzero(data, sizeof(struct winsize));
return (0);
default:
return (ENOTTY);
}
}
tp = com->tp;
#if defined(COMPAT_43) || defined(COMPAT_SUNOS)
term = tp->t_termios;
oldcmd = cmd;
error = ttsetcompat(tp, &cmd, data, &term);
if (error != 0)
return (error);
if (cmd != oldcmd)
data = (caddr_t)&term;
#endif
if (cmd == TIOCSETA || cmd == TIOCSETAW || cmd == TIOCSETAF) {
int cc;
struct termios *dt = (struct termios *)data;
struct termios *lt = mynor & CALLOUT_MASK
? &com->lt_out : &com->lt_in;
dt->c_iflag = (tp->t_iflag & lt->c_iflag)
| (dt->c_iflag & ~lt->c_iflag);
dt->c_oflag = (tp->t_oflag & lt->c_oflag)
| (dt->c_oflag & ~lt->c_oflag);
dt->c_cflag = (tp->t_cflag & lt->c_cflag)
| (dt->c_cflag & ~lt->c_cflag);
dt->c_lflag = (tp->t_lflag & lt->c_lflag)
| (dt->c_lflag & ~lt->c_lflag);
for (cc = 0; cc < NCCS; ++cc)
if (lt->c_cc[cc] != 0)
dt->c_cc[cc] = tp->t_cc[cc];
if (lt->c_ispeed != 0)
dt->c_ispeed = tp->t_ispeed;
if (lt->c_ospeed != 0)
dt->c_ospeed = tp->t_ospeed;
}
error = (*linesw[tp->t_line].l_ioctl)(tp, cmd, data, flag, p);
if (error != ENOIOCTL)
return (error);
s = spltty();
error = ttioctl(tp, cmd, data, flag);
disc_optim(tp, &tp->t_termios, com);
if (error != ENOIOCTL) {
splx(s);
return (error);
}
switch (cmd) {
case TIOCSBRK:
outb(iobase + com_cfcr, com->cfcr_image |= CFCR_SBREAK);
break;
case TIOCCBRK:
outb(iobase + com_cfcr, com->cfcr_image &= ~CFCR_SBREAK);
break;
case TIOCSDTR:
(void)commctl(com, TIOCM_DTR, DMBIS);
break;
case TIOCCDTR:
(void)commctl(com, TIOCM_DTR, DMBIC);
break;
/*
* XXX should disallow changing MCR_RTS if CS_RTS_IFLOW is set. The
* changes get undone on the next call to comparam().
*/
case TIOCMSET:
(void)commctl(com, *(int *)data, DMSET);
break;
case TIOCMBIS:
(void)commctl(com, *(int *)data, DMBIS);
break;
case TIOCMBIC:
(void)commctl(com, *(int *)data, DMBIC);
break;
case TIOCMGET:
*(int *)data = commctl(com, 0, DMGET);
break;
case TIOCMSDTRWAIT:
/* must be root since the wait applies to following logins */
error = suser(p);
if (error != 0) {
splx(s);
return (error);
}
com->dtr_wait = *(int *)data * hz / 100;
break;
case TIOCMGDTRWAIT:
*(int *)data = com->dtr_wait * 100 / hz;
break;
case TIOCTIMESTAMP:
com->do_timestamp = TRUE;
*(struct timeval *)data = com->timestamp;
break;
case TIOCDCDTIMESTAMP:
com->do_dcd_timestamp = TRUE;
*(struct timeval *)data = com->dcd_timestamp;
break;
default:
splx(s);
error = pps_ioctl(cmd, data, &com->pps);
if (error == ENODEV)
error = ENOTTY;
return (error);
}
splx(s);
return (0);
}
static void
siopoll()
{
int unit;
if (com_events == 0)
return;
repeat:
for (unit = 0; unit < NSIOTOT; ++unit) {
struct com_s *com;
int incc;
struct tty *tp;
com = com_addr(unit);
if (com == NULL)
continue;
tp = com->tp;
if (tp == NULL || com->gone) {
/*
* Discard any events related to never-opened or
* going-away devices.
*/
disable_intr();
incc = com->iptr - com->ibuf;
com->iptr = com->ibuf;
if (com->state & CS_CHECKMSR) {
incc += LOTS_OF_EVENTS;
com->state &= ~CS_CHECKMSR;
}
com_events -= incc;
enable_intr();
continue;
}
if (com->iptr != com->ibuf) {
disable_intr();
sioinput(com);
enable_intr();
}
if (com->state & CS_CHECKMSR) {
u_char delta_modem_status;
disable_intr();
delta_modem_status = com->last_modem_status
^ com->prev_modem_status;
com->prev_modem_status = com->last_modem_status;
com_events -= LOTS_OF_EVENTS;
com->state &= ~CS_CHECKMSR;
enable_intr();
if (delta_modem_status & MSR_DCD)
(*linesw[tp->t_line].l_modem)
(tp, com->prev_modem_status & MSR_DCD);
}
if (com->state & CS_ODONE) {
disable_intr();
com_events -= LOTS_OF_EVENTS;
com->state &= ~CS_ODONE;
enable_intr();
if (!(com->state & CS_BUSY)
&& !(com->extra_state & CSE_BUSYCHECK)) {
timeout(siobusycheck, com, hz / 100);
com->extra_state |= CSE_BUSYCHECK;
}
(*linesw[tp->t_line].l_start)(tp);
}
if (com_events == 0)
break;
}
if (com_events >= LOTS_OF_EVENTS)
goto repeat;
}
static int
comparam(tp, t)
struct tty *tp;
struct termios *t;
{
u_int cfcr;
int cflag;
struct com_s *com;
int divisor;
u_char dlbh;
u_char dlbl;
Port_t iobase;
int s;
int unit;
/* do historical conversions */
if (t->c_ispeed == 0)
t->c_ispeed = t->c_ospeed;
/* check requested parameters */
divisor = ttspeedtab(t->c_ospeed, comspeedtab);
if (divisor < 0 || (divisor > 0 && t->c_ispeed != t->c_ospeed))
return (EINVAL);
/* parameters are OK, convert them to the com struct and the device */
unit = DEV_TO_UNIT(tp->t_dev);
com = com_addr(unit);
iobase = com->iobase;
s = spltty();
if (divisor == 0)
(void)commctl(com, TIOCM_DTR, DMBIC); /* hang up line */
else
(void)commctl(com, TIOCM_DTR, DMBIS);
cflag = t->c_cflag;
switch (cflag & CSIZE) {
case CS5:
cfcr = CFCR_5BITS;
break;
case CS6:
cfcr = CFCR_6BITS;
break;
case CS7:
cfcr = CFCR_7BITS;
break;
default:
cfcr = CFCR_8BITS;
break;
}
if (cflag & PARENB) {
cfcr |= CFCR_PENAB;
if (!(cflag & PARODD))
cfcr |= CFCR_PEVEN;
}
if (cflag & CSTOPB)
cfcr |= CFCR_STOPB;
if (com->hasfifo && divisor != 0) {
/*
* Use a fifo trigger level low enough so that the input
* latency from the fifo is less than about 16 msec and
* the total latency is less than about 30 msec. These
* latencies are reasonable for humans. Serial comms
* protocols shouldn't expect anything better since modem
* latencies are larger.
*/
com->fifo_image = t->c_ospeed <= 4800
? FIFO_ENABLE : FIFO_ENABLE | FIFO_RX_HIGH;
#ifdef COM_ESP
/*
* The Hayes ESP card needs the fifo DMA mode bit set
* in compatibility mode. If not, it will interrupt
* for each character received.
*/
if (com->esp)
com->fifo_image |= FIFO_DMA_MODE;
#endif
outb(iobase + com_fifo, com->fifo_image);
}
/*
* This returns with interrupts disabled so that we can complete
* the speed change atomically. Keeping interrupts disabled is
* especially important while com_data is hidden.
*/
(void) siosetwater(com, t->c_ispeed);
if (divisor != 0) {
outb(iobase + com_cfcr, cfcr | CFCR_DLAB);
/*
* Only set the divisor registers if they would change,
* since on some 16550 incompatibles (UMC8669F), setting
* them while input is arriving them loses sync until
* data stops arriving.
*/
dlbl = divisor & 0xFF;
if (inb(iobase + com_dlbl) != dlbl)
outb(iobase + com_dlbl, dlbl);
dlbh = (u_int) divisor >> 8;
if (inb(iobase + com_dlbh) != dlbh)
outb(iobase + com_dlbh, dlbh);
}
outb(iobase + com_cfcr, com->cfcr_image = cfcr);
if (!(tp->t_state & TS_TTSTOP))
com->state |= CS_TTGO;
if (cflag & CRTS_IFLOW) {
if (com->st16650a) {
outb(iobase + com_cfcr, 0xbf);
outb(iobase + com_fifo, inb(iobase + com_fifo) | 0x40);
}
com->state |= CS_RTS_IFLOW;
/*
* If CS_RTS_IFLOW just changed from off to on, the change
* needs to be propagated to MCR_RTS. This isn't urgent,
* so do it later by calling comstart() instead of repeating
* a lot of code from comstart() here.
*/
} else if (com->state & CS_RTS_IFLOW) {
com->state &= ~CS_RTS_IFLOW;
/*
* CS_RTS_IFLOW just changed from on to off. Force MCR_RTS
* on here, since comstart() won't do it later.
*/
outb(com->modem_ctl_port, com->mcr_image |= MCR_RTS);
if (com->st16650a) {
outb(iobase + com_cfcr, 0xbf);
outb(iobase + com_fifo, inb(iobase + com_fifo) & ~0x40);
}
}
/*
* Set up state to handle output flow control.
* XXX - worth handling MDMBUF (DCD) flow control at the lowest level?
* Now has 10+ msec latency, while CTS flow has 50- usec latency.
*/
com->state |= CS_ODEVREADY;
com->state &= ~CS_CTS_OFLOW;
if (cflag & CCTS_OFLOW) {
com->state |= CS_CTS_OFLOW;
if (!(com->last_modem_status & MSR_CTS))
com->state &= ~CS_ODEVREADY;
if (com->st16650a) {
outb(iobase + com_cfcr, 0xbf);
outb(iobase + com_fifo, inb(iobase + com_fifo) | 0x80);
}
} else {
if (com->st16650a) {
outb(iobase + com_cfcr, 0xbf);
outb(iobase + com_fifo, inb(iobase + com_fifo) & ~0x80);
}
}
outb(iobase + com_cfcr, com->cfcr_image);
/* XXX shouldn't call functions while intrs are disabled. */
disc_optim(tp, t, com);
/*
* Recover from fiddling with CS_TTGO. We used to call siointr1()
* unconditionally, but that defeated the careful discarding of
* stale input in sioopen().
*/
if (com->state >= (CS_BUSY | CS_TTGO))
siointr1(com);
enable_intr();
splx(s);
comstart(tp);
if (com->ibufold != NULL) {
free(com->ibufold, M_DEVBUF);
com->ibufold = NULL;
}
return (0);
}
static int
siosetwater(com, speed)
struct com_s *com;
speed_t speed;
{
int cp4ticks;
u_char *ibuf;
int ibufsize;
struct tty *tp;
/*
* Make the buffer size large enough to handle a softtty interrupt
* latency of about 2 ticks without loss of throughput or data
* (about 3 ticks if input flow control is not used or not honoured,
* but a bit less for CS5-CS7 modes).
*/
cp4ticks = speed / 10 / hz * 4;
for (ibufsize = 128; ibufsize < cp4ticks;)
ibufsize <<= 1;
if (ibufsize == com->ibufsize) {
disable_intr();
return (0);
}
/*
* Allocate input buffer. The extra factor of 2 in the size is
* to allow for an error byte for each input byte.
*/
ibuf = malloc(2 * ibufsize, M_DEVBUF, M_NOWAIT);
if (ibuf == NULL) {
disable_intr();
return (ENOMEM);
}
/* Initialize non-critical variables. */
com->ibufold = com->ibuf;
com->ibufsize = ibufsize;
tp = com->tp;
if (tp != NULL) {
tp->t_ififosize = 2 * ibufsize;
tp->t_ispeedwat = (speed_t)-1;
tp->t_ospeedwat = (speed_t)-1;
}
/*
* Read current input buffer, if any. Continue with interrupts
* disabled.
*/
disable_intr();
if (com->iptr != com->ibuf)
sioinput(com);
/*-
* Initialize critical variables, including input buffer watermarks.
* The external device is asked to stop sending when the buffer
* exactly reaches high water, or when the high level requests it.
* The high level is notified immediately (rather than at a later
* clock tick) when this watermark is reached.
* The buffer size is chosen so the watermark should almost never
* be reached.
* The low watermark is invisibly 0 since the buffer is always
* emptied all at once.
*/
com->iptr = com->ibuf = ibuf;
com->ibufend = ibuf + ibufsize;
com->ierroff = ibufsize;
com->ihighwater = ibuf + 3 * ibufsize / 4;
return (0);
}
static void
comstart(tp)
struct tty *tp;
{
struct com_s *com;
int s;
int unit;
unit = DEV_TO_UNIT(tp->t_dev);
com = com_addr(unit);
s = spltty();
disable_intr();
if (tp->t_state & TS_TTSTOP)
com->state &= ~CS_TTGO;
else
com->state |= CS_TTGO;
if (tp->t_state & TS_TBLOCK) {
if (com->mcr_image & MCR_RTS && com->state & CS_RTS_IFLOW)
outb(com->modem_ctl_port, com->mcr_image &= ~MCR_RTS);
} else {
if (!(com->mcr_image & MCR_RTS) && com->iptr < com->ihighwater
&& com->state & CS_RTS_IFLOW)
outb(com->modem_ctl_port, com->mcr_image |= MCR_RTS);
}
enable_intr();
if (tp->t_state & (TS_TIMEOUT | TS_TTSTOP)) {
ttwwakeup(tp);
splx(s);
return;
}
if (tp->t_outq.c_cc != 0) {
struct lbq *qp;
struct lbq *next;
if (!com->obufs[0].l_queued) {
com->obufs[0].l_tail
= com->obuf1 + q_to_b(&tp->t_outq, com->obuf1,
sizeof com->obuf1);
com->obufs[0].l_next = NULL;
com->obufs[0].l_queued = TRUE;
disable_intr();
if (com->state & CS_BUSY) {
qp = com->obufq.l_next;
while ((next = qp->l_next) != NULL)
qp = next;
qp->l_next = &com->obufs[0];
} else {
com->obufq.l_head = com->obufs[0].l_head;
com->obufq.l_tail = com->obufs[0].l_tail;
com->obufq.l_next = &com->obufs[0];
com->state |= CS_BUSY;
}
enable_intr();
}
if (tp->t_outq.c_cc != 0 && !com->obufs[1].l_queued) {
com->obufs[1].l_tail
= com->obuf2 + q_to_b(&tp->t_outq, com->obuf2,
sizeof com->obuf2);
com->obufs[1].l_next = NULL;
com->obufs[1].l_queued = TRUE;
disable_intr();
if (com->state & CS_BUSY) {
qp = com->obufq.l_next;
while ((next = qp->l_next) != NULL)
qp = next;
qp->l_next = &com->obufs[1];
} else {
com->obufq.l_head = com->obufs[1].l_head;
com->obufq.l_tail = com->obufs[1].l_tail;
com->obufq.l_next = &com->obufs[1];
com->state |= CS_BUSY;
}
enable_intr();
}
tp->t_state |= TS_BUSY;
}
disable_intr();
if (com->state >= (CS_BUSY | CS_TTGO))
siointr1(com); /* fake interrupt to start output */
enable_intr();
ttwwakeup(tp);
splx(s);
}
static void
comstop(tp, rw)
struct tty *tp;
int rw;
{
struct com_s *com;
com = com_addr(DEV_TO_UNIT(tp->t_dev));
if (com->gone)
return;
disable_intr();
if (rw & FWRITE) {
if (com->hasfifo)
#ifdef COM_ESP
/* XXX avoid h/w bug. */
if (!com->esp)
#endif
outb(com->iobase + com_fifo,
FIFO_XMT_RST | com->fifo_image);
com->obufs[0].l_queued = FALSE;
com->obufs[1].l_queued = FALSE;
if (com->state & CS_ODONE)
com_events -= LOTS_OF_EVENTS;
com->state &= ~(CS_ODONE | CS_BUSY);
com->tp->t_state &= ~TS_BUSY;
}
if (rw & FREAD) {
if (com->hasfifo)
#ifdef COM_ESP
/* XXX avoid h/w bug. */
if (!com->esp)
#endif
outb(com->iobase + com_fifo,
FIFO_RCV_RST | com->fifo_image);
com_events -= (com->iptr - com->ibuf);
com->iptr = com->ibuf;
}
enable_intr();
comstart(tp);
}
static int
commctl(com, bits, how)
struct com_s *com;
int bits;
int how;
{
int mcr;
int msr;
if (how == DMGET) {
bits = TIOCM_LE; /* XXX - always enabled while open */
mcr = com->mcr_image;
if (mcr & MCR_DTR)
bits |= TIOCM_DTR;
if (mcr & MCR_RTS)
bits |= TIOCM_RTS;
msr = com->prev_modem_status;
if (msr & MSR_CTS)
bits |= TIOCM_CTS;
if (msr & MSR_DCD)
bits |= TIOCM_CD;
if (msr & MSR_DSR)
bits |= TIOCM_DSR;
/*
* XXX - MSR_RI is naturally volatile, and we make MSR_TERI
* more volatile by reading the modem status a lot. Perhaps
* we should latch both bits until the status is read here.
*/
if (msr & (MSR_RI | MSR_TERI))
bits |= TIOCM_RI;
return (bits);
}
mcr = 0;
if (bits & TIOCM_DTR)
mcr |= MCR_DTR;
if (bits & TIOCM_RTS)
mcr |= MCR_RTS;
if (com->gone)
return(0);
disable_intr();
switch (how) {
case DMSET:
outb(com->modem_ctl_port,
com->mcr_image = mcr | (com->mcr_image & MCR_IENABLE));
break;
case DMBIS:
outb(com->modem_ctl_port, com->mcr_image |= mcr);
break;
case DMBIC:
outb(com->modem_ctl_port, com->mcr_image &= ~mcr);
break;
}
enable_intr();
return (0);
}
static void
siosettimeout()
{
struct com_s *com;
bool_t someopen;
int unit;
/*
* Set our timeout period to 1 second if no polled devices are open.
* Otherwise set it to max(1/200, 1/hz).
* Enable timeouts iff some device is open.
*/
untimeout(comwakeup, (void *)NULL, sio_timeout_handle);
sio_timeout = hz;
someopen = FALSE;
for (unit = 0; unit < NSIOTOT; ++unit) {
com = com_addr(unit);
if (com != NULL && com->tp != NULL
&& com->tp->t_state & TS_ISOPEN && !com->gone) {
someopen = TRUE;
if (com->poll || com->poll_output) {
sio_timeout = hz > 200 ? hz / 200 : 1;
break;
}
}
}
if (someopen) {
sio_timeouts_until_log = hz / sio_timeout;
sio_timeout_handle = timeout(comwakeup, (void *)NULL,
sio_timeout);
} else {
/* Flush error messages, if any. */
sio_timeouts_until_log = 1;
comwakeup((void *)NULL);
untimeout(comwakeup, (void *)NULL, sio_timeout_handle);
}
}
static void
comwakeup(chan)
void *chan;
{
struct com_s *com;
int unit;
sio_timeout_handle = timeout(comwakeup, (void *)NULL, sio_timeout);
/*
* Recover from lost output interrupts.
* Poll any lines that don't use interrupts.
*/
for (unit = 0; unit < NSIOTOT; ++unit) {
com = com_addr(unit);
if (com != NULL && !com->gone
&& (com->state >= (CS_BUSY | CS_TTGO) || com->poll)) {
disable_intr();
siointr1(com);
enable_intr();
}
}
/*
* Check for and log errors, but not too often.
*/
if (--sio_timeouts_until_log > 0)
return;
sio_timeouts_until_log = hz / sio_timeout;
for (unit = 0; unit < NSIOTOT; ++unit) {
int errnum;
com = com_addr(unit);
if (com == NULL)
continue;
if (com->gone)
continue;
for (errnum = 0; errnum < CE_NTYPES; ++errnum) {
u_int delta;
u_long total;
disable_intr();
delta = com->delta_error_counts[errnum];
com->delta_error_counts[errnum] = 0;
enable_intr();
if (delta == 0)
continue;
total = com->error_counts[errnum] += delta;
log(LOG_ERR, "sio%d: %u more %s%s (total %lu)\n",
unit, delta, error_desc[errnum],
delta == 1 ? "" : "s", total);
}
}
}
static void
disc_optim(tp, t, com)
struct tty *tp;
struct termios *t;
struct com_s *com;
{
if (!(t->c_iflag & (ICRNL | IGNCR | IMAXBEL | INLCR | ISTRIP | IXON))
&& (!(t->c_iflag & BRKINT) || (t->c_iflag & IGNBRK))
&& (!(t->c_iflag & PARMRK)
|| (t->c_iflag & (IGNPAR | IGNBRK)) == (IGNPAR | IGNBRK))
&& !(t->c_lflag & (ECHO | ICANON | IEXTEN | ISIG | PENDIN))
&& linesw[tp->t_line].l_rint == ttyinput)
tp->t_state |= TS_CAN_BYPASS_L_RINT;
else
tp->t_state &= ~TS_CAN_BYPASS_L_RINT;
com->hotchar = linesw[tp->t_line].l_hotchar;
}
/*
* Following are all routines needed for SIO to act as console
*/
#include <sys/cons.h>
struct siocnstate {
u_char dlbl;
u_char dlbh;
u_char ier;
u_char cfcr;
u_char mcr;
};
static speed_t siocngetspeed __P((Port_t, struct speedtab *));
static void siocnclose __P((struct siocnstate *sp, Port_t iobase));
static void siocnopen __P((struct siocnstate *sp, Port_t iobase, int speed));
static void siocntxwait __P((Port_t iobase));
static cn_probe_t siocnprobe;
static cn_init_t siocninit;
static cn_checkc_t siocncheckc;
static cn_getc_t siocngetc;
static cn_putc_t siocnputc;
#ifdef __i386__
CONS_DRIVER(sio, siocnprobe, siocninit, NULL, siocngetc, siocncheckc, siocnputc);
#endif
/* To get the GDB related variables */
#if DDB > 0
#include <ddb/ddb.h>
#endif
static void
siocntxwait(iobase)
Port_t iobase;
{
int timo;
/*
* Wait for any pending transmission to finish. Required to avoid
* the UART lockup bug when the speed is changed, and for normal
* transmits.
*/
timo = 100000;
while ((inb(iobase + com_lsr) & (LSR_TSRE | LSR_TXRDY))
!= (LSR_TSRE | LSR_TXRDY) && --timo != 0)
;
}
/*
* Read the serial port specified and try to figure out what speed
* it's currently running at. We're assuming the serial port has
* been initialized and is basicly idle. This routine is only intended
* to be run at system startup.
*
* If the value read from the serial port doesn't make sense, return 0.
*/
static speed_t
siocngetspeed(iobase, table)
Port_t iobase;
struct speedtab *table;
{
int code;
u_char dlbh;
u_char dlbl;
u_char cfcr;
cfcr = inb(iobase + com_cfcr);
outb(iobase + com_cfcr, CFCR_DLAB | cfcr);
dlbl = inb(iobase + com_dlbl);
dlbh = inb(iobase + com_dlbh);
outb(iobase + com_cfcr, cfcr);
code = dlbh << 8 | dlbl;
for ( ; table->sp_speed != -1; table++)
if (table->sp_code == code)
return (table->sp_speed);
return 0; /* didn't match anything sane */
}
static void
siocnopen(sp, iobase, speed)
struct siocnstate *sp;
Port_t iobase;
int speed;
{
int divisor;
u_char dlbh;
u_char dlbl;
/*
* Save all the device control registers except the fifo register
* and set our default ones (cs8 -parenb speed=comdefaultrate).
* We can't save the fifo register since it is read-only.
*/
sp->ier = inb(iobase + com_ier);
outb(iobase + com_ier, 0); /* spltty() doesn't stop siointr() */
siocntxwait(iobase);
sp->cfcr = inb(iobase + com_cfcr);
outb(iobase + com_cfcr, CFCR_DLAB | CFCR_8BITS);
sp->dlbl = inb(iobase + com_dlbl);
sp->dlbh = inb(iobase + com_dlbh);
/*
* Only set the divisor registers if they would change, since on
* some 16550 incompatibles (Startech), setting them clears the
* data input register. This also reduces the effects of the
* UMC8669F bug.
*/
divisor = ttspeedtab(speed, comspeedtab);
dlbl = divisor & 0xFF;
if (sp->dlbl != dlbl)
outb(iobase + com_dlbl, dlbl);
dlbh = (u_int) divisor >> 8;
if (sp->dlbh != dlbh)
outb(iobase + com_dlbh, dlbh);
outb(iobase + com_cfcr, CFCR_8BITS);
sp->mcr = inb(iobase + com_mcr);
/*
* We don't want interrupts, but must be careful not to "disable"
* them by clearing the MCR_IENABLE bit, since that might cause
* an interrupt by floating the IRQ line.
*/
outb(iobase + com_mcr, (sp->mcr & MCR_IENABLE) | MCR_DTR | MCR_RTS);
}
static void
siocnclose(sp, iobase)
struct siocnstate *sp;
Port_t iobase;
{
/*
* Restore the device control registers.
*/
siocntxwait(iobase);
outb(iobase + com_cfcr, CFCR_DLAB | CFCR_8BITS);
if (sp->dlbl != inb(iobase + com_dlbl))
outb(iobase + com_dlbl, sp->dlbl);
if (sp->dlbh != inb(iobase + com_dlbh))
outb(iobase + com_dlbh, sp->dlbh);
outb(iobase + com_cfcr, sp->cfcr);
/*
* XXX damp oscillations of MCR_DTR and MCR_RTS by not restoring them.
*/
outb(iobase + com_mcr, sp->mcr | MCR_DTR | MCR_RTS);
outb(iobase + com_ier, sp->ier);
}
static void
siocnprobe(cp)
struct consdev *cp;
{
speed_t boot_speed;
u_char cfcr;
int s, unit;
struct siocnstate sp;
/*
* Find our first enabled console, if any. If it is a high-level
* console device, then initialize it and return successfully.
* If it is a low-level console device, then initialize it and
* return unsuccessfully. It must be initialized in both cases
* for early use by console drivers and debuggers. Initializing
* the hardware is not necessary in all cases, since the i/o
* routines initialize it on the fly, but it is necessary if
* input might arrive while the hardware is switched back to an
* uninitialized state. We can't handle multiple console devices
* yet because our low-level routines don't take a device arg.
* We trust the user to set the console flags properly so that we
* don't need to probe.
*/
cp->cn_pri = CN_DEAD;
for (unit = 0; unit < 16; unit++) { /* XXX need to know how many */
int flags;
int disabled;
if (resource_int_value("sio", unit, "disabled", &disabled) == 0) {
if (disabled)
continue;
}
if (resource_int_value("sio", unit, "flags", &flags))
continue;
if (COM_CONSOLE(flags) || COM_DEBUGGER(flags)) {
int port;
Port_t iobase;
if (resource_int_value("sio", unit, "port", &port))
continue;
iobase = port;
s = spltty();
if (boothowto & RB_SERIAL) {
boot_speed = siocngetspeed(iobase, comspeedtab);
if (boot_speed)
comdefaultrate = boot_speed;
}
/*
* Initialize the divisor latch. We can't rely on
* siocnopen() to do this the first time, since it
* avoids writing to the latch if the latch appears
* to have the correct value. Also, if we didn't
* just read the speed from the hardware, then we
* need to set the speed in hardware so that
* switching it later is null.
*/
cfcr = inb(iobase + com_cfcr);
outb(iobase + com_cfcr, CFCR_DLAB | cfcr);
outb(iobase + com_dlbl,
COMBRD(comdefaultrate) & 0xff);
outb(iobase + com_dlbh,
(u_int) COMBRD(comdefaultrate) >> 8);
outb(iobase + com_cfcr, cfcr);
siocnopen(&sp, iobase, comdefaultrate);
splx(s);
if (COM_CONSOLE(flags) && !COM_LLCONSOLE(flags)) {
cp->cn_dev = makedev(CDEV_MAJOR, unit);
cp->cn_pri = COM_FORCECONSOLE(flags)
|| boothowto & RB_SERIAL
? CN_REMOTE : CN_NORMAL;
siocniobase = iobase;
siocnunit = unit;
}
if (COM_DEBUGGER(flags)) {
printf("sio%d: gdb debugging port\n", unit);
siogdbiobase = iobase;
siogdbunit = unit;
#if DDB > 0
gdbdev = makedev(CDEV_MAJOR, unit);
gdb_getc = siocngetc;
gdb_putc = siocnputc;
#endif
}
}
}
#ifdef __i386__
#if DDB > 0
/*
* XXX Ugly Compatability.
* If no gdb port has been specified, set it to be the console
* as some configuration files don't specify the gdb port.
*/
if (gdbdev == NODEV && (boothowto & RB_GDB)) {
printf("Warning: no GDB port specified. Defaulting to sio%d.\n",
siocnunit);
printf("Set flag 0x80 on desired GDB port in your\n");
printf("configuration file (currently sio only).\n");
siogdbiobase = siocniobase;
siogdbunit = siocnunit;
gdbdev = makedev(CDEV_MAJOR, siocnunit);
gdb_getc = siocngetc;
gdb_putc = siocnputc;
}
#endif
#endif
}
#ifdef __alpha__
CONS_DRIVER(sio, NULL, NULL, NULL, siocngetc, siocncheckc, siocnputc);
int
siocnattach(port, speed)
int port;
int speed;
{
int s;
u_char cfcr;
struct siocnstate sp;
siocniobase = port;
comdefaultrate = speed;
sio_consdev.cn_pri = CN_NORMAL;
sio_consdev.cn_dev = makedev(CDEV_MAJOR, 0);
s = spltty();
/*
* Initialize the divisor latch. We can't rely on
* siocnopen() to do this the first time, since it
* avoids writing to the latch if the latch appears
* to have the correct value. Also, if we didn't
* just read the speed from the hardware, then we
* need to set the speed in hardware so that
* switching it later is null.
*/
cfcr = inb(siocniobase + com_cfcr);
outb(siocniobase + com_cfcr, CFCR_DLAB | cfcr);
outb(siocniobase + com_dlbl,
COMBRD(comdefaultrate) & 0xff);
outb(siocniobase + com_dlbh,
(u_int) COMBRD(comdefaultrate) >> 8);
outb(siocniobase + com_cfcr, cfcr);
siocnopen(&sp, siocniobase, comdefaultrate);
splx(s);
cn_tab = &sio_consdev;
return 0;
}
int
siogdbattach(port, speed)
int port;
int speed;
{
int s;
u_char cfcr;
struct siocnstate sp;
siogdbiobase = port;
gdbdefaultrate = speed;
s = spltty();
/*
* Initialize the divisor latch. We can't rely on
* siocnopen() to do this the first time, since it
* avoids writing to the latch if the latch appears
* to have the correct value. Also, if we didn't
* just read the speed from the hardware, then we
* need to set the speed in hardware so that
* switching it later is null.
*/
cfcr = inb(siogdbiobase + com_cfcr);
outb(siogdbiobase + com_cfcr, CFCR_DLAB | cfcr);
outb(siogdbiobase + com_dlbl,
COMBRD(gdbdefaultrate) & 0xff);
outb(siogdbiobase + com_dlbh,
(u_int) COMBRD(gdbdefaultrate) >> 8);
outb(siogdbiobase + com_cfcr, cfcr);
siocnopen(&sp, siogdbiobase, gdbdefaultrate);
splx(s);
return 0;
}
#endif
static void
siocninit(cp)
struct consdev *cp;
{
comconsole = DEV_TO_UNIT(cp->cn_dev);
}
static int
siocncheckc(dev)
dev_t dev;
{
int c;
Port_t iobase;
int s;
struct siocnstate sp;
if (minor(dev) == siogdbunit)
iobase = siogdbiobase;
else
iobase = siocniobase;
s = spltty();
siocnopen(&sp, iobase, comdefaultrate);
if (inb(iobase + com_lsr) & LSR_RXRDY)
c = inb(iobase + com_data);
else
c = -1;
siocnclose(&sp, iobase);
splx(s);
return (c);
}
int
siocngetc(dev)
dev_t dev;
{
int c;
Port_t iobase;
int s;
struct siocnstate sp;
if (minor(dev) == siogdbunit)
iobase = siogdbiobase;
else
iobase = siocniobase;
s = spltty();
siocnopen(&sp, iobase, comdefaultrate);
while (!(inb(iobase + com_lsr) & LSR_RXRDY))
;
c = inb(iobase + com_data);
siocnclose(&sp, iobase);
splx(s);
return (c);
}
void
siocnputc(dev, c)
dev_t dev;
int c;
{
int s;
struct siocnstate sp;
Port_t iobase;
if (minor(dev) == siogdbunit)
iobase = siogdbiobase;
else
iobase = siocniobase;
s = spltty();
siocnopen(&sp, iobase, comdefaultrate);
siocntxwait(iobase);
outb(iobase + com_data, c);
siocnclose(&sp, iobase);
splx(s);
}
#ifdef __alpha__
int
siogdbgetc()
{
int c;
Port_t iobase;
int s;
struct siocnstate sp;
iobase = siogdbiobase;
s = spltty();
siocnopen(&sp, iobase, gdbdefaultrate);
while (!(inb(iobase + com_lsr) & LSR_RXRDY))
;
c = inb(iobase + com_data);
siocnclose(&sp, iobase);
splx(s);
return (c);
}
void
siogdbputc(c)
int c;
{
int s;
struct siocnstate sp;
s = spltty();
siocnopen(&sp, siogdbiobase, gdbdefaultrate);
siocntxwait(siogdbiobase);
outb(siogdbiobase + com_data, c);
siocnclose(&sp, siogdbiobase);
splx(s);
}
#endif
DEV_DRIVER_MODULE(sio, isa, sio_driver, sio_devclass, sio_cdevsw, 0, 0);
Reference in New Issue View Git Blame Copy Permalink