freebsd-skq/sys/i4b/layer1/i4b_sws.c
phk 62efea1e92 Remove 42 unneeded #include <sys/ioccom.h>.
ioccom.h defines only implementation detail, and should therefore
only be included from the #include which defines the ioctl tags,
in other words: never include it from *.c
2000-05-03 07:31:38 +00:00

224 lines
7.3 KiB
C

/*
* Copyright (c) 1998 German Tischler. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
* 4. Altered versions must be plainly marked as such, and must not be
* misrepresented as being the original software and/or documentation.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*---------------------------------------------------------------------------
*
* Card format:
*
* iobase + 0 : reset on (0x03)
* iobase + 1 : reset off (0x0)
* iobase + 2 : isac read/write
* iobase + 3 : hscx read/write ( offset 0-0x3f hscx0 ,
* offset 0x40-0x7f hscx1 )
* iobase + 4 : offset for indirect adressing
*
*---------------------------------------------------------------------------
*
* isic - I4B Siemens ISDN Chipset Driver for SWS cards
* ====================================================
*
* $Id: i4b_sws.c,v 1.2 1999/12/13 21:25:26 hm Exp $
*
* $FreeBSD$
*
* last edit-date: [Mon Dec 13 22:02:39 1999]
*
*---------------------------------------------------------------------------*/
#include "isic.h"
#include "opt_i4b.h"
#if defined (SEDLBAUER) && NISIC > 0
#define SWS_RESON 0 /* reset on */
#define SWS_RESOFF 1 /* reset off */
#define SWS_ISAC 2 /* ISAC */
#define SWS_HSCX0 3 /* HSCX0 */
#define SWS_RW 4 /* indirect access register */
#define SWS_HSCX1 5 /* this is for fakeing that we mean hscx1, though */
/* access is done through hscx0 */
#define SWS_REGS 8 /* we use an area of 8 bytes for io */
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/mbuf.h>
#include <sys/socket.h>
#include <machine/clock.h>
#include <net/if.h>
#include <machine/i4b_debug.h>
#include <machine/i4b_ioctl.h>
#include <i4b/layer1/i4b_l1.h>
#include <i4b/layer1/i4b_isac.h>
#include <i4b/layer1/i4b_hscx.h>
#include <i4b/include/i4b_global.h>
#include <i4b/include/i4b_l1l2.h>
#include <i4b/include/i4b_mbuf.h>
/*---------------------------------------------------------------------------*
* SWS P&P ISAC get fifo routine
*---------------------------------------------------------------------------*/
static void
sws_read_fifo(struct l1_softc *sc,int what,void *buf,size_t size) {
bus_space_tag_t t = rman_get_bustag(sc->sc_resources.io_base[0]);
bus_space_handle_t h = rman_get_bushandle(sc->sc_resources.io_base[0]);
switch ( what ) {
case ISIC_WHAT_ISAC:
bus_space_write_1(t,h,SWS_RW,0x0);
bus_space_read_multi_1(t,h,SWS_ISAC,buf,size);
break;
case ISIC_WHAT_HSCXA:
bus_space_write_1(t,h,SWS_RW,0x0);
bus_space_read_multi_1(t,h,SWS_HSCX0,buf,size);
break;
case ISIC_WHAT_HSCXB:
bus_space_write_1(t,h,SWS_RW,0x0+0x40);
bus_space_read_multi_1(t,h,SWS_HSCX0,buf,size);
break;
}
}
static void
sws_write_fifo(struct l1_softc *sc,int what,void *buf,size_t size) {
bus_space_tag_t t = rman_get_bustag(sc->sc_resources.io_base[0]);
bus_space_handle_t h = rman_get_bushandle(sc->sc_resources.io_base[0]);
switch ( what ) {
case ISIC_WHAT_ISAC:
bus_space_write_1(t,h,SWS_RW,0x0);
bus_space_write_multi_1(t,h,SWS_ISAC,buf,size);
break;
case ISIC_WHAT_HSCXA:
bus_space_write_1(t,h,SWS_RW,0x0);
bus_space_write_multi_1(t,h,SWS_HSCX0,buf,size);
break;
case ISIC_WHAT_HSCXB:
bus_space_write_1(t,h,SWS_RW,0x0+0x40);
bus_space_write_multi_1(t,h,SWS_HSCX0,buf,size);
break;
}
}
static void
sws_write_reg(struct l1_softc *sc,int what,bus_size_t reg,u_int8_t data) {
bus_space_tag_t t = rman_get_bustag(sc->sc_resources.io_base[0]);
bus_space_handle_t h = rman_get_bushandle(sc->sc_resources.io_base[0]);
switch ( what ) {
case ISIC_WHAT_ISAC:
bus_space_write_1(t,h,SWS_RW,reg);
bus_space_write_1(t,h,SWS_ISAC,data);
break;
case ISIC_WHAT_HSCXA:
bus_space_write_1(t,h,SWS_RW,reg);
bus_space_write_1(t,h,SWS_HSCX0,data);
break;
case ISIC_WHAT_HSCXB:
bus_space_write_1(t,h,SWS_RW,reg+0x40);
bus_space_write_1(t,h,SWS_HSCX0,data);
break;
}
}
static u_char
sws_read_reg (struct l1_softc *sc,int what,bus_size_t reg) {
bus_space_tag_t t = rman_get_bustag(sc->sc_resources.io_base[0]);
bus_space_handle_t h = rman_get_bushandle(sc->sc_resources.io_base[0]);
switch ( what ) {
case ISIC_WHAT_ISAC:
bus_space_write_1(t,h,SWS_RW,reg);
return bus_space_read_1(t,h,SWS_ISAC);
case ISIC_WHAT_HSCXA:
bus_space_write_1(t,h,SWS_RW,reg);
return bus_space_read_1(t,h,SWS_HSCX0);
case ISIC_WHAT_HSCXB:
bus_space_write_1(t,h,SWS_RW,reg+0x40);
return bus_space_read_1(t,h,SWS_HSCX0);
default:
return 0;
}
}
/* attach callback routine */
int
isic_attach_sws(device_t dev)
{
int unit = device_get_unit(dev);
struct l1_softc *sc = &l1_sc[unit];
struct i4b_info * info = &(sc->sc_resources);
bus_space_tag_t t = rman_get_bustag(info->io_base[0]);
bus_space_handle_t h = rman_get_bushandle(info->io_base[0]);
/* fill in l1_softc structure */
sc->readreg = sws_read_reg;
sc->writereg = sws_write_reg;
sc->readfifo = sws_read_fifo;
sc->writefifo = sws_write_fifo;
sc->clearirq = NULL;
sc->sc_cardtyp = CARD_TYPEP_SWS;
sc->sc_bustyp = BUS_TYPE_IOM2;
sc->sc_ipac = 0;
sc->sc_bfifolen = HSCX_FIFO_LEN;
/*
* Read HSCX A/B VSTR. Expected value for the SWS PnP card is
* 0x05 ( = version 2.1 ) in the least significant bits.
*/
if( ((HSCX_READ(0, H_VSTR) & 0xf) != 0x5) ||
((HSCX_READ(1, H_VSTR) & 0xf) != 0x5) )
{
printf("isic%d: HSCX VSTR test failed for SWS PnP\n",
sc->sc_unit);
printf("isic%d: HSC0: VSTR: %#x\n",
sc->sc_unit, HSCX_READ(0, H_VSTR));
printf("isic%d: HSC1: VSTR: %#x\n",
sc->sc_unit, HSCX_READ(1, H_VSTR));
return (ENXIO);
}
/* reset card */
bus_space_write_1(t,h,SWS_RESON,0x3);
DELAY(SEC_DELAY / 5);
bus_space_write_1(t,h,SWS_RESOFF,0x0);
DELAY(SEC_DELAY / 5);
return(0);
}
#endif /* defined(SEDLBAUER) && NISIC > 0 */