10baba4b95
The last consumer of this code (the old SCSI system) has left us and the CAM code does it's own bouncing. The isa dma system has been doing it's own bouncing for a while too. Reviewed by: core
193 lines
6.4 KiB
Plaintext
193 lines
6.4 KiB
Plaintext
#
|
|
# SMP-GENERIC -- Smp machine with WD/AHx/NCR/BTx family disks
|
|
#
|
|
# For more information read the handbook part System Administration ->
|
|
# Configuring the FreeBSD Kernel -> The Configuration File.
|
|
# The handbook is available in /usr/share/doc/handbook or online as
|
|
# latest version from the FreeBSD World Wide Web server
|
|
# <URL:http://www.FreeBSD.ORG/>
|
|
#
|
|
# An exhaustive list of options and more detailed explanations of the
|
|
# device lines is present in the ./LINT configuration file. If you are
|
|
# in doubt as to the purpose or necessity of a line, check first in LINT.
|
|
#
|
|
# $Id: SMP-GENERIC,v 1.15 1998/09/18 00:46:41 mjacob Exp $
|
|
|
|
machine "i386"
|
|
# SMP does NOT support 386/486 CPUs.
|
|
#cpu "I386_CPU"
|
|
#cpu "I486_CPU"
|
|
|
|
cpu "I586_CPU"
|
|
cpu "I686_CPU"
|
|
ident SMP-GENERIC
|
|
maxusers 32
|
|
|
|
# Create a SMP capable kernel (mandatory options):
|
|
options SMP # Symmetric MultiProcessor Kernel
|
|
options APIC_IO # Symmetric (APIC) I/O
|
|
|
|
# Optional, these are the defaults:
|
|
#options NCPU=2 # number of CPUs
|
|
#options NBUS=4 # number of busses
|
|
#options NAPIC=1 # number of IO APICs
|
|
#options NINTR=24 # number of INTs
|
|
|
|
# Lets always enable the kernel debugger for SMP.
|
|
options DDB
|
|
|
|
# SMP shouldn't need x87 emulation, disable by default.
|
|
#options MATH_EMULATE #Support for x87 emulation
|
|
|
|
options INET #InterNETworking
|
|
options FFS #Berkeley Fast Filesystem
|
|
options NFS #Network Filesystem
|
|
options MSDOSFS #MSDOS Filesystem
|
|
options "CD9660" #ISO 9660 Filesystem
|
|
options PROCFS #Process filesystem
|
|
options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!]
|
|
options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device
|
|
options UCONSOLE #Allow users to grab the console
|
|
options FAILSAFE #Be conservative
|
|
options USERCONFIG #boot -c editor
|
|
options VISUAL_USERCONFIG #visual boot -c editor
|
|
|
|
config kernel root on wd0
|
|
|
|
controller isa0
|
|
controller eisa0
|
|
controller pci0
|
|
|
|
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
|
|
disk fd0 at fdc0 drive 0
|
|
disk fd1 at fdc0 drive 1
|
|
# Unless you know very well what you're doing, leave ft0 at drive 2, or
|
|
# remove the line entirely if you don't need it. Trying to configure
|
|
# it on another unit might cause surprises, see PR kern/7176.
|
|
tape ft0 at fdc0 drive 2
|
|
|
|
options "CMD640" # work around CMD640 chip deficiency
|
|
controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr
|
|
disk wd0 at wdc0 drive 0
|
|
disk wd1 at wdc0 drive 1
|
|
|
|
controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr
|
|
disk wd2 at wdc1 drive 0
|
|
disk wd3 at wdc1 drive 1
|
|
|
|
options ATAPI #Enable ATAPI support for IDE bus
|
|
options ATAPI_STATIC #Don't do it as an LKM
|
|
device wcd0 #IDE CD-ROM
|
|
|
|
# A single entry for any of these controllers (ncr, ahb, ahc, amd) is
|
|
# sufficient for any number of installed devices.
|
|
controller ncr0
|
|
#controller amd0
|
|
controller ahb0
|
|
controller ahc0
|
|
controller isp0
|
|
|
|
# This controller offers a number of configuration options, too many to
|
|
# document here - see the LINT file in this directory and look up the
|
|
# dpt0 entry there for much fuller documentation on this. The options
|
|
# line following dpt0 here is also currently a *required* option for it.
|
|
# controller dpt0
|
|
# options DPT_MEASURE_PERFORMANCE
|
|
|
|
controller adv0 at isa? port ? cam irq ?
|
|
controller bt0 at isa? port ? cam irq ?
|
|
controller aha0 at isa? port ? cam irq ?
|
|
#controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr
|
|
#controller aic0 at isa? port 0x340 bio irq 11 vector aicintr
|
|
#controller nca0 at isa? port 0x1f88 bio irq 10 vector ncaintr
|
|
#controller nca1 at isa? port 0x350 bio irq 5 vector ncaintr
|
|
#controller sea0 at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector seaintr
|
|
|
|
controller scbus0
|
|
|
|
device da0
|
|
|
|
device sa0
|
|
|
|
device pass0
|
|
|
|
device cd0 #Only need one of these, the code dynamically grows
|
|
|
|
device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr
|
|
device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr
|
|
|
|
controller matcd0 at isa? port 0x230 bio
|
|
|
|
device scd0 at isa? port 0x230 bio
|
|
|
|
# syscons is the default console driver, resembling an SCO console
|
|
device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr
|
|
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
|
|
#device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint
|
|
#options XSERVER # include code for XFree86
|
|
#options FAT_CURSOR # start with block cursor
|
|
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
|
|
#options PCVT_SCANSET=2 # IBM keyboards are non-std
|
|
|
|
device npx0 at isa? port "IO_NPX" irq 13 vector npxintr
|
|
|
|
#
|
|
# Laptop support (see LINT for more options)
|
|
#
|
|
device apm0 at isa? disable flags 0x31 # Advanced Power Management
|
|
|
|
# PCCARD (PCMCIA) support
|
|
#controller card0
|
|
#device pcic0 at card?
|
|
#device pcic1 at card?
|
|
|
|
device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 vector siointr
|
|
device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr
|
|
device sio2 at isa? disable port "IO_COM3" tty irq 5 vector siointr
|
|
device sio3 at isa? disable port "IO_COM4" tty irq 9 vector siointr
|
|
|
|
device lpt0 at isa? port? tty irq 7 vector lptintr
|
|
device lpt1 at isa? port? tty
|
|
device mse0 at isa? port 0x23c tty irq 5 vector mseintr
|
|
|
|
device psm0 at isa? disable port "IO_KBD" conflicts tty irq 12 vector psmintr
|
|
|
|
# Order is important here due to intrusive probes, do *not* alphabetize
|
|
# this list of network interfaces until the probes have been fixed.
|
|
# Right now it appears that the ie0 must be probed before ep0. See
|
|
# revision 1.20 of this file.
|
|
device de0
|
|
device fxp0
|
|
device tl0
|
|
device tx0
|
|
device vx0
|
|
device xl0
|
|
|
|
device ed0 at isa? port 0x280 net irq 5 iomem 0xd8000 vector edintr
|
|
device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000 vector ieintr
|
|
device ep0 at isa? port 0x300 net irq 10 vector epintr
|
|
device ex0 at isa? port? net irq? vector exintr
|
|
device fe0 at isa? port 0x300 net irq ? vector feintr
|
|
device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr
|
|
device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr
|
|
device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr
|
|
device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr
|
|
device cs0 at isa? port 0x300 net irq ? vector csintr
|
|
|
|
pseudo-device loop
|
|
pseudo-device ether
|
|
pseudo-device sl 1
|
|
#pseudo-device ppp 1
|
|
pseudo-device tun 1
|
|
pseudo-device pty 16
|
|
pseudo-device gzip # Exec gzipped a.out's
|
|
|
|
# KTRACE enables the system-call tracing facility ktrace(2).
|
|
# This adds 4 KB bloat to your kernel, and slightly increases
|
|
# the costs of each syscall.
|
|
options KTRACE #kernel tracing
|
|
|
|
# This provides support for System V shared memory.
|
|
#
|
|
options SYSVSHM
|