bbc84740c1
o Consistently use device_foo_t and bus_foo_t for functions implementing device_foo and bus_foo respectively. Adjust those routines that were wrong (we should do this throughout the tree). o make all the modules depend on usb. Otherwise these modules won't load. o ucycom doesn't need usb_port.h o Minor unifdefing o uhub, umass, ums, urio, uscanner conversion complete. o ukbd: Remove the NO_SET_PROTO quirk (fixes a PR 77940). NetBSD removed their check and setting the proto a long time ago. o umodem panic fixed. UQ_ASSUME_CM_OVER_DATA quirk removed because I've never seen a umodem that needed this rejection for proection (this gets rid of ~20% of the quirks). Approved by: re@ (kensmith) PR: 77940
586 lines
16 KiB
C
586 lines
16 KiB
C
/*-
|
|
* Copyright (c) 1998 The NetBSD Foundation, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to The NetBSD Foundation
|
|
* by Lennart Augustsson (augustss@carlstedt.se) at
|
|
* Carlstedt Research & Technology.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by the NetBSD
|
|
* Foundation, Inc. and its contributors.
|
|
* 4. Neither the name of The NetBSD Foundation nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
/*
|
|
* USB Enhanced Host Controller Driver, a.k.a. USB 2.0 controller.
|
|
*
|
|
* The EHCI 1.0 spec can be found at
|
|
* http://developer.intel.com/technology/usb/download/ehci-r10.pdf
|
|
* and the USB 2.0 spec at
|
|
* http://www.usb.org/developers/docs/usb_20.zip
|
|
*/
|
|
|
|
/* The low level controller code for EHCI has been split into
|
|
* PCI probes and EHCI specific code. This was done to facilitate the
|
|
* sharing of code between *BSD's
|
|
*/
|
|
|
|
#include "opt_bus.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/module.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/queue.h>
|
|
#include <sys/lockmgr.h>
|
|
#include <machine/bus.h>
|
|
#include <sys/rman.h>
|
|
#include <machine/resource.h>
|
|
|
|
#include <dev/pci/pcivar.h>
|
|
#include <dev/pci/pcireg.h>
|
|
|
|
#include <dev/usb/usb.h>
|
|
#include <dev/usb/usbdi.h>
|
|
#include <dev/usb/usbdivar.h>
|
|
#include <dev/usb/usb_mem.h>
|
|
|
|
#include <dev/usb/ehcireg.h>
|
|
#include <dev/usb/ehcivar.h>
|
|
|
|
#define PCI_EHCI_VENDORID_ACERLABS 0x10b9
|
|
#define PCI_EHCI_VENDORID_AMD 0x1022
|
|
#define PCI_EHCI_VENDORID_APPLE 0x106b
|
|
#define PCI_EHCI_VENDORID_ATI 0x1002
|
|
#define PCI_EHCI_VENDORID_CMDTECH 0x1095
|
|
#define PCI_EHCI_VENDORID_INTEL 0x8086
|
|
#define PCI_EHCI_VENDORID_NEC 0x1033
|
|
#define PCI_EHCI_VENDORID_OPTI 0x1045
|
|
#define PCI_EHCI_VENDORID_PHILIPS 0x1131
|
|
#define PCI_EHCI_VENDORID_SIS 0x1039
|
|
#define PCI_EHCI_VENDORID_NVIDIA 0x12D2
|
|
#define PCI_EHCI_VENDORID_NVIDIA2 0x10DE
|
|
#define PCI_EHCI_VENDORID_VIA 0x1106
|
|
|
|
/* AcerLabs/ALi */
|
|
#define PCI_EHCI_DEVICEID_M5239 0x523910b9
|
|
static const char *ehci_device_m5239 = "ALi M5239 USB 2.0 controller";
|
|
|
|
/* AMD */
|
|
#define PCI_EHCI_DEVICEID_8111 0x10227463
|
|
static const char *ehci_device_8111 = "AMD 8111 USB 2.0 controller";
|
|
|
|
/* ATI */
|
|
#define PCI_EHCI_DEVICEID_SB200 0x43451002
|
|
static const char *ehci_device_sb200 = "ATI SB200 USB 2.0 controller";
|
|
#define PCI_EHCI_DEVICEID_SB400 0x43731002
|
|
static const char *ehci_device_sb400 = "ATI SB400 USB 2.0 controller";
|
|
|
|
/* Intel */
|
|
#define PCI_EHCI_DEVICEID_6300 0x25ad8086
|
|
static const char *ehci_device_6300 = "Intel 6300ESB USB 2.0 controller";
|
|
#define PCI_EHCI_DEVICEID_ICH4 0x24cd8086
|
|
static const char *ehci_device_ich4 = "Intel 82801DB/L/M (ICH4) USB 2.0 controller";
|
|
#define PCI_EHCI_DEVICEID_ICH5 0x24dd8086
|
|
static const char *ehci_device_ich5 = "Intel 82801EB/R (ICH5) USB 2.0 controller";
|
|
#define PCI_EHCI_DEVICEID_ICH6 0x265c8086
|
|
static const char *ehci_device_ich6 = "Intel 82801FB (ICH6) USB 2.0 controller";
|
|
#define PCI_EHCI_DEVICEID_ICH7 0x27cc8086
|
|
static const char *ehci_device_ich7 = "Intel 82801GB/R (ICH7) USB 2.0 controller";
|
|
|
|
/* NEC */
|
|
#define PCI_EHCI_DEVICEID_NEC 0x00e01033
|
|
static const char *ehci_device_nec = "NEC uPD 720100 USB 2.0 controller";
|
|
|
|
/* NVIDIA */
|
|
#define PCI_EHCI_DEVICEID_NF2 0x006810de
|
|
static const char *ehci_device_nf2 = "NVIDIA nForce2 USB 2.0 controller";
|
|
#define PCI_EHCI_DEVICEID_NF2_400 0x008810de
|
|
static const char *ehci_device_nf2_400 = "NVIDIA nForce2 Ultra 400 USB 2.0 controller";
|
|
#define PCI_EHCI_DEVICEID_NF3 0x00d810de
|
|
static const char *ehci_device_nf3 = "NVIDIA nForce3 USB 2.0 controller";
|
|
#define PCI_EHCI_DEVICEID_NF3_250 0x00e810de
|
|
static const char *ehci_device_nf3_250 = "NVIDIA nForce3 250 USB 2.0 controller";
|
|
#define PCI_EHCI_DEVICEID_NF4 0x005b10de
|
|
static const char *ehci_device_nf4 = "NVIDIA nForce4 USB 2.0 controller";
|
|
|
|
/* Philips */
|
|
#define PCI_EHCI_DEVICEID_ISP156X 0x15621131
|
|
static const char *ehci_device_isp156x = "Philips ISP156x USB 2.0 controller";
|
|
|
|
#define PCI_EHCI_DEVICEID_VIA 0x31041106
|
|
static const char *ehci_device_via = "VIA VT6202 USB 2.0 controller";
|
|
|
|
static const char *ehci_device_generic = "EHCI (generic) USB 2.0 controller";
|
|
|
|
#define PCI_EHCI_BASE_REG 0x10
|
|
|
|
#ifdef USB_DEBUG
|
|
#define EHCI_DEBUG USB_DEBUG
|
|
#define DPRINTF(x) do { if (ehcidebug) printf x; } while (0)
|
|
extern int ehcidebug;
|
|
#else
|
|
#define DPRINTF(x)
|
|
#endif
|
|
|
|
static device_attach_t ehci_pci_attach;
|
|
static device_detach_t ehci_pci_detach;
|
|
static device_shutdown_t ehci_pci_shutdown;
|
|
static device_suspend_t ehci_pci_suspend;
|
|
static device_resume_t ehci_pci_resume;
|
|
static void ehci_pci_givecontroller(device_t self);
|
|
static void ehci_pci_takecontroller(device_t self);
|
|
|
|
static int
|
|
ehci_pci_suspend(device_t self)
|
|
{
|
|
ehci_softc_t *sc = device_get_softc(self);
|
|
int err;
|
|
|
|
err = bus_generic_suspend(self);
|
|
if (err)
|
|
return (err);
|
|
ehci_power(PWR_SUSPEND, sc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
ehci_pci_resume(device_t self)
|
|
{
|
|
ehci_softc_t *sc = device_get_softc(self);
|
|
|
|
ehci_pci_takecontroller(self);
|
|
ehci_power(PWR_RESUME, sc);
|
|
bus_generic_resume(self);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
ehci_pci_shutdown(device_t self)
|
|
{
|
|
ehci_softc_t *sc = device_get_softc(self);
|
|
int err;
|
|
|
|
err = bus_generic_shutdown(self);
|
|
if (err)
|
|
return (err);
|
|
ehci_shutdown(sc);
|
|
ehci_pci_givecontroller(self);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const char *
|
|
ehci_pci_match(device_t self)
|
|
{
|
|
u_int32_t device_id = pci_get_devid(self);
|
|
|
|
switch (device_id) {
|
|
case PCI_EHCI_DEVICEID_M5239:
|
|
return (ehci_device_m5239);
|
|
case PCI_EHCI_DEVICEID_8111:
|
|
return (ehci_device_8111);
|
|
case PCI_EHCI_DEVICEID_SB200:
|
|
return (ehci_device_sb200);
|
|
case PCI_EHCI_DEVICEID_SB400:
|
|
return (ehci_device_sb400);
|
|
case PCI_EHCI_DEVICEID_6300:
|
|
return (ehci_device_6300);
|
|
case PCI_EHCI_DEVICEID_ICH4:
|
|
return (ehci_device_ich4);
|
|
case PCI_EHCI_DEVICEID_ICH5:
|
|
return (ehci_device_ich5);
|
|
case PCI_EHCI_DEVICEID_ICH6:
|
|
return (ehci_device_ich6);
|
|
case PCI_EHCI_DEVICEID_ICH7:
|
|
return (ehci_device_ich7);
|
|
case PCI_EHCI_DEVICEID_NEC:
|
|
return (ehci_device_nec);
|
|
case PCI_EHCI_DEVICEID_NF2:
|
|
return (ehci_device_nf2);
|
|
case PCI_EHCI_DEVICEID_NF2_400:
|
|
return (ehci_device_nf2_400);
|
|
case PCI_EHCI_DEVICEID_NF3:
|
|
return (ehci_device_nf3);
|
|
case PCI_EHCI_DEVICEID_NF3_250:
|
|
return (ehci_device_nf3_250);
|
|
case PCI_EHCI_DEVICEID_NF4:
|
|
return (ehci_device_nf4);
|
|
case PCI_EHCI_DEVICEID_ISP156X:
|
|
return (ehci_device_isp156x);
|
|
case PCI_EHCI_DEVICEID_VIA:
|
|
return (ehci_device_via);
|
|
default:
|
|
if (pci_get_class(self) == PCIC_SERIALBUS
|
|
&& pci_get_subclass(self) == PCIS_SERIALBUS_USB
|
|
&& pci_get_progif(self) == PCI_INTERFACE_EHCI) {
|
|
return (ehci_device_generic);
|
|
}
|
|
}
|
|
|
|
return NULL; /* dunno */
|
|
}
|
|
|
|
static int
|
|
ehci_pci_probe(device_t self)
|
|
{
|
|
const char *desc = ehci_pci_match(self);
|
|
|
|
if (desc) {
|
|
device_set_desc(self, desc);
|
|
return BUS_PROBE_DEFAULT;
|
|
} else {
|
|
return ENXIO;
|
|
}
|
|
}
|
|
|
|
static int
|
|
ehci_pci_attach(device_t self)
|
|
{
|
|
ehci_softc_t *sc = device_get_softc(self);
|
|
device_t parent;
|
|
device_t *neighbors;
|
|
device_t *nbus;
|
|
struct usbd_bus *bsc;
|
|
int err;
|
|
int rid;
|
|
int ncomp;
|
|
int count, buscount;
|
|
int slot, function;
|
|
int res;
|
|
int i;
|
|
|
|
switch(pci_read_config(self, PCI_USBREV, 1) & PCI_USBREV_MASK) {
|
|
case PCI_USBREV_PRE_1_0:
|
|
case PCI_USBREV_1_0:
|
|
case PCI_USBREV_1_1:
|
|
sc->sc_bus.usbrev = USBREV_UNKNOWN;
|
|
printf("pre-2.0 USB rev\n");
|
|
return ENXIO;
|
|
case PCI_USBREV_2_0:
|
|
sc->sc_bus.usbrev = USBREV_2_0;
|
|
break;
|
|
default:
|
|
sc->sc_bus.usbrev = USBREV_UNKNOWN;
|
|
break;
|
|
}
|
|
|
|
pci_enable_busmaster(self);
|
|
|
|
rid = PCI_CBMEM;
|
|
sc->io_res = bus_alloc_resource_any(self, SYS_RES_MEMORY, &rid,
|
|
RF_ACTIVE);
|
|
if (!sc->io_res) {
|
|
device_printf(self, "Could not map memory\n");
|
|
return ENXIO;
|
|
}
|
|
sc->iot = rman_get_bustag(sc->io_res);
|
|
sc->ioh = rman_get_bushandle(sc->io_res);
|
|
|
|
rid = 0;
|
|
sc->irq_res = bus_alloc_resource_any(self, SYS_RES_IRQ, &rid,
|
|
RF_SHAREABLE | RF_ACTIVE);
|
|
if (sc->irq_res == NULL) {
|
|
device_printf(self, "Could not allocate irq\n");
|
|
ehci_pci_detach(self);
|
|
return ENXIO;
|
|
}
|
|
sc->sc_bus.bdev = device_add_child(self, "usb", -1);
|
|
if (!sc->sc_bus.bdev) {
|
|
device_printf(self, "Could not add USB device\n");
|
|
ehci_pci_detach(self);
|
|
return ENOMEM;
|
|
}
|
|
device_set_ivars(sc->sc_bus.bdev, &sc->sc_bus);
|
|
|
|
/* ehci_pci_match will never return NULL if ehci_pci_probe succeeded */
|
|
device_set_desc(sc->sc_bus.bdev, ehci_pci_match(self));
|
|
switch (pci_get_vendor(self)) {
|
|
case PCI_EHCI_VENDORID_ACERLABS:
|
|
sprintf(sc->sc_vendor, "AcerLabs");
|
|
break;
|
|
case PCI_EHCI_VENDORID_AMD:
|
|
sprintf(sc->sc_vendor, "AMD");
|
|
break;
|
|
case PCI_EHCI_VENDORID_APPLE:
|
|
sprintf(sc->sc_vendor, "Apple");
|
|
break;
|
|
case PCI_EHCI_VENDORID_ATI:
|
|
sprintf(sc->sc_vendor, "ATI");
|
|
break;
|
|
case PCI_EHCI_VENDORID_CMDTECH:
|
|
sprintf(sc->sc_vendor, "CMDTECH");
|
|
break;
|
|
case PCI_EHCI_VENDORID_INTEL:
|
|
sprintf(sc->sc_vendor, "Intel");
|
|
break;
|
|
case PCI_EHCI_VENDORID_NEC:
|
|
sprintf(sc->sc_vendor, "NEC");
|
|
break;
|
|
case PCI_EHCI_VENDORID_OPTI:
|
|
sprintf(sc->sc_vendor, "OPTi");
|
|
break;
|
|
case PCI_EHCI_VENDORID_SIS:
|
|
sprintf(sc->sc_vendor, "SiS");
|
|
break;
|
|
case PCI_EHCI_VENDORID_NVIDIA:
|
|
case PCI_EHCI_VENDORID_NVIDIA2:
|
|
sprintf(sc->sc_vendor, "nVidia");
|
|
break;
|
|
case PCI_EHCI_VENDORID_VIA:
|
|
sprintf(sc->sc_vendor, "VIA");
|
|
break;
|
|
default:
|
|
if (bootverbose)
|
|
device_printf(self, "(New EHCI DeviceId=0x%08x)\n",
|
|
pci_get_devid(self));
|
|
sprintf(sc->sc_vendor, "(0x%04x)", pci_get_vendor(self));
|
|
}
|
|
|
|
err = bus_setup_intr(self, sc->irq_res, INTR_TYPE_BIO,
|
|
NULL, (driver_intr_t *)ehci_intr, sc, &sc->ih);
|
|
if (err) {
|
|
device_printf(self, "Could not setup irq, %d\n", err);
|
|
sc->ih = NULL;
|
|
ehci_pci_detach(self);
|
|
return ENXIO;
|
|
}
|
|
|
|
/* Enable workaround for dropped interrupts as required */
|
|
switch (pci_get_vendor(self)) {
|
|
case PCI_EHCI_VENDORID_ATI:
|
|
case PCI_EHCI_VENDORID_VIA:
|
|
sc->sc_flags |= EHCI_SCFLG_LOSTINTRBUG;
|
|
if (bootverbose)
|
|
device_printf(self,
|
|
"Dropped interrupts workaround enabled\n");
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* Find companion controllers. According to the spec they always
|
|
* have lower function numbers so they should be enumerated already.
|
|
*/
|
|
parent = device_get_parent(self);
|
|
res = device_get_children(parent, &neighbors, &count);
|
|
if (res != 0) {
|
|
device_printf(self, "Error finding companion busses\n");
|
|
ehci_pci_detach(self);
|
|
return ENXIO;
|
|
}
|
|
ncomp = 0;
|
|
slot = pci_get_slot(self);
|
|
function = pci_get_function(self);
|
|
for (i = 0; i < count; i++) {
|
|
if (pci_get_slot(neighbors[i]) == slot && \
|
|
pci_get_function(neighbors[i]) < function) {
|
|
res = device_get_children(neighbors[i],
|
|
&nbus, &buscount);
|
|
if (res != 0 || buscount != 1)
|
|
continue;
|
|
bsc = device_get_softc(nbus[0]);
|
|
DPRINTF(("ehci_pci_attach: companion %s\n",
|
|
device_get_nameunit(bsc->bdev)));
|
|
sc->sc_comps[ncomp++] = bsc;
|
|
if (ncomp >= EHCI_COMPANION_MAX)
|
|
break;
|
|
}
|
|
}
|
|
sc->sc_ncomp = ncomp;
|
|
|
|
/* Allocate a parent dma tag for DMA maps */
|
|
err = bus_dma_tag_create(bus_get_dma_tag(self), 1, 0,
|
|
BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL,
|
|
BUS_SPACE_MAXSIZE_32BIT, USB_DMA_NSEG, BUS_SPACE_MAXSIZE_32BIT, 0,
|
|
NULL, NULL, &sc->sc_bus.parent_dmatag);
|
|
if (err) {
|
|
device_printf(self, "Could not allocate parent DMA tag (%d)\n",
|
|
err);
|
|
ehci_pci_detach(self);
|
|
return ENXIO;
|
|
}
|
|
|
|
/* Allocate a dma tag for transfer buffers */
|
|
err = bus_dma_tag_create(sc->sc_bus.parent_dmatag, 1, 0,
|
|
BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL,
|
|
BUS_SPACE_MAXSIZE_32BIT, USB_DMA_NSEG, BUS_SPACE_MAXSIZE_32BIT, 0,
|
|
busdma_lock_mutex, &Giant, &sc->sc_bus.buffer_dmatag);
|
|
if (err) {
|
|
device_printf(self, "Could not allocate buffer DMA tag (%d)\n",
|
|
err);
|
|
ehci_pci_detach(self);
|
|
return ENXIO;
|
|
}
|
|
|
|
ehci_pci_takecontroller(self);
|
|
err = ehci_init(sc);
|
|
if (!err) {
|
|
sc->sc_flags |= EHCI_SCFLG_DONEINIT;
|
|
err = device_probe_and_attach(sc->sc_bus.bdev);
|
|
}
|
|
|
|
if (err) {
|
|
device_printf(self, "USB init failed err=%d\n", err);
|
|
ehci_pci_detach(self);
|
|
return EIO;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
ehci_pci_detach(device_t self)
|
|
{
|
|
ehci_softc_t *sc = device_get_softc(self);
|
|
|
|
if (sc->sc_flags & EHCI_SCFLG_DONEINIT) {
|
|
ehci_detach(sc, 0);
|
|
sc->sc_flags &= ~EHCI_SCFLG_DONEINIT;
|
|
}
|
|
|
|
/*
|
|
* disable interrupts that might have been switched on in ehci_init
|
|
*/
|
|
if (sc->iot && sc->ioh)
|
|
bus_space_write_4(sc->iot, sc->ioh, EHCI_USBINTR, 0);
|
|
if (sc->sc_bus.parent_dmatag != NULL)
|
|
bus_dma_tag_destroy(sc->sc_bus.parent_dmatag);
|
|
if (sc->sc_bus.buffer_dmatag != NULL)
|
|
bus_dma_tag_destroy(sc->sc_bus.buffer_dmatag);
|
|
|
|
if (sc->irq_res && sc->ih) {
|
|
int err = bus_teardown_intr(self, sc->irq_res, sc->ih);
|
|
|
|
if (err)
|
|
/* XXX or should we panic? */
|
|
device_printf(self, "Could not tear down irq, %d\n",
|
|
err);
|
|
sc->ih = NULL;
|
|
}
|
|
if (sc->sc_bus.bdev) {
|
|
device_delete_child(self, sc->sc_bus.bdev);
|
|
sc->sc_bus.bdev = NULL;
|
|
}
|
|
if (sc->irq_res) {
|
|
bus_release_resource(self, SYS_RES_IRQ, 0, sc->irq_res);
|
|
sc->irq_res = NULL;
|
|
}
|
|
if (sc->io_res) {
|
|
bus_release_resource(self, SYS_RES_MEMORY, PCI_CBMEM, sc->io_res);
|
|
sc->io_res = NULL;
|
|
sc->iot = 0;
|
|
sc->ioh = 0;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
ehci_pci_takecontroller(device_t self)
|
|
{
|
|
ehci_softc_t *sc = device_get_softc(self);
|
|
u_int32_t cparams, eec, legsup;
|
|
int eecp, i;
|
|
|
|
cparams = EREAD4(sc, EHCI_HCCPARAMS);
|
|
|
|
/* Synchronise with the BIOS if it owns the controller. */
|
|
for (eecp = EHCI_HCC_EECP(cparams); eecp != 0;
|
|
eecp = EHCI_EECP_NEXT(eec)) {
|
|
eec = pci_read_config(self, eecp, 4);
|
|
if (EHCI_EECP_ID(eec) != EHCI_EC_LEGSUP)
|
|
continue;
|
|
legsup = eec;
|
|
pci_write_config(self, eecp, legsup | EHCI_LEGSUP_OSOWNED, 4);
|
|
if (legsup & EHCI_LEGSUP_BIOSOWNED) {
|
|
printf("%s: waiting for BIOS to give up control\n",
|
|
device_get_nameunit(sc->sc_bus.bdev));
|
|
for (i = 0; i < 5000; i++) {
|
|
legsup = pci_read_config(self, eecp, 4);
|
|
if ((legsup & EHCI_LEGSUP_BIOSOWNED) == 0)
|
|
break;
|
|
DELAY(1000);
|
|
}
|
|
if (legsup & EHCI_LEGSUP_BIOSOWNED)
|
|
printf("%s: timed out waiting for BIOS\n",
|
|
device_get_nameunit(sc->sc_bus.bdev));
|
|
}
|
|
}
|
|
}
|
|
|
|
static void
|
|
ehci_pci_givecontroller(device_t self)
|
|
{
|
|
ehci_softc_t *sc = device_get_softc(self);
|
|
u_int32_t cparams, eec, legsup;
|
|
int eecp;
|
|
|
|
cparams = EREAD4(sc, EHCI_HCCPARAMS);
|
|
for (eecp = EHCI_HCC_EECP(cparams); eecp != 0;
|
|
eecp = EHCI_EECP_NEXT(eec)) {
|
|
eec = pci_read_config(self, eecp, 4);
|
|
if (EHCI_EECP_ID(eec) != EHCI_EC_LEGSUP)
|
|
continue;
|
|
legsup = eec;
|
|
pci_write_config(self, eecp, legsup & ~EHCI_LEGSUP_OSOWNED, 4);
|
|
}
|
|
}
|
|
|
|
static device_method_t ehci_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, ehci_pci_probe),
|
|
DEVMETHOD(device_attach, ehci_pci_attach),
|
|
DEVMETHOD(device_detach, ehci_pci_detach),
|
|
DEVMETHOD(device_suspend, ehci_pci_suspend),
|
|
DEVMETHOD(device_resume, ehci_pci_resume),
|
|
DEVMETHOD(device_shutdown, ehci_pci_shutdown),
|
|
|
|
/* Bus interface */
|
|
DEVMETHOD(bus_print_child, bus_generic_print_child),
|
|
|
|
{0, 0}
|
|
};
|
|
|
|
static driver_t ehci_driver = {
|
|
"ehci",
|
|
ehci_methods,
|
|
sizeof(ehci_softc_t),
|
|
};
|
|
|
|
static devclass_t ehci_devclass;
|
|
|
|
DRIVER_MODULE(ehci, pci, ehci_driver, ehci_devclass, 0, 0);
|
|
DRIVER_MODULE(ehci, cardbus, ehci_driver, ehci_devclass, 0, 0);
|