freebsd-skq/sys/dev/usb/if_uralvar.h
Sam Leffler 68e8e04e93 Update 802.11 wireless support:
o major overhaul of the way channels are handled: channels are now
  fully enumerated and uniquely identify the operating characteristics;
  these changes are visible to user applications which require changes
o make scanning support independent of the state machine to enable
  background scanning and roaming
o move scanning support into loadable modules based on the operating
  mode to enable different policies and reduce the memory footprint
  on systems w/ constrained resources
o add background scanning in station mode (no support for adhoc/ibss
  mode yet)
o significantly speedup sta mode scanning with a variety of techniques
o add roaming support when background scanning is supported; for now
  we use a simple algorithm to trigger a roam: we threshold the rssi
  and tx rate, if either drops too low we try to roam to a new ap
o add tx fragmentation support
o add first cut at 802.11n support: this code works with forthcoming
  drivers but is incomplete; it's included now to establish a baseline
  for other drivers to be developed and for user applications
o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates
  prepending mbufs for traffic generated locally
o add support for Atheros protocol extensions; mainly the fast frames
  encapsulation (note this can be used with any card that can tx+rx
  large frames correctly)
o add sta support for ap's that beacon both WPA1+2 support
o change all data types from bsd-style to posix-style
o propagate noise floor data from drivers to net80211 and on to user apps
o correct various issues in the sta mode state machine related to handling
  authentication and association failures
o enable the addition of sta mode power save support for drivers that need
  net80211 support (not in this commit)
o remove old WI compatibility ioctls (wicontrol is officially dead)
o change the data structures returned for get sta info and get scan
  results so future additions will not break user apps
o fixed tx rate is now maintained internally as an ieee rate and not an
  index into the rate set; this needs to be extended to deal with
  multi-mode operation
o add extended channel specifications to radiotap to enable 11n sniffing

Drivers:
o ath: add support for bg scanning, tx fragmentation, fast frames,
       dynamic turbo (lightly tested), 11n (sniffing only and needs
       new hal)
o awi: compile tested only
o ndis: lightly tested
o ipw: lightly tested
o iwi: add support for bg scanning (well tested but may have some
       rough edges)
o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data
o wi: lightly tested

This work is based on contributions by Atheros, kmacy, sephe, thompsa,
mlaier, kevlo, and others.  Much of the scanning work was supported by
Atheros.  The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00

157 lines
3.7 KiB
C

/* $FreeBSD$ */
/*-
* Copyright (c) 2005
* Damien Bergamini <damien.bergamini@free.fr>
*
* Permission to use, copy, modify, and distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#define RAL_RX_LIST_COUNT 1
#define RAL_TX_LIST_COUNT 1
#define URAL_SCAN_START 1
#define URAL_SCAN_END 2
#define URAL_SET_CHANNEL 3
struct ural_rx_radiotap_header {
struct ieee80211_radiotap_header wr_ihdr;
uint8_t wr_flags;
uint8_t wr_rate;
uint16_t wr_chan_freq;
uint16_t wr_chan_flags;
uint8_t wr_antenna;
uint8_t wr_antsignal;
};
#define RAL_RX_RADIOTAP_PRESENT \
((1 << IEEE80211_RADIOTAP_FLAGS) | \
(1 << IEEE80211_RADIOTAP_RATE) | \
(1 << IEEE80211_RADIOTAP_CHANNEL) | \
(1 << IEEE80211_RADIOTAP_ANTENNA) | \
(1 << IEEE80211_RADIOTAP_DB_ANTSIGNAL))
struct ural_tx_radiotap_header {
struct ieee80211_radiotap_header wt_ihdr;
uint8_t wt_flags;
uint8_t wt_rate;
uint16_t wt_chan_freq;
uint16_t wt_chan_flags;
uint8_t wt_antenna;
};
#define RAL_TX_RADIOTAP_PRESENT \
((1 << IEEE80211_RADIOTAP_FLAGS) | \
(1 << IEEE80211_RADIOTAP_RATE) | \
(1 << IEEE80211_RADIOTAP_CHANNEL) | \
(1 << IEEE80211_RADIOTAP_ANTENNA))
struct ural_softc;
struct ural_tx_data {
struct ural_softc *sc;
usbd_xfer_handle xfer;
uint8_t *buf;
struct mbuf *m;
struct ieee80211_node *ni;
};
struct ural_rx_data {
struct ural_softc *sc;
usbd_xfer_handle xfer;
uint8_t *buf;
struct mbuf *m;
};
struct ural_softc {
struct ifnet *sc_ifp;
struct ieee80211com sc_ic;
int (*sc_newstate)(struct ieee80211com *,
enum ieee80211_state, int);
device_t sc_dev;
usbd_device_handle sc_udev;
usbd_interface_handle sc_iface;
int sc_rx_no;
int sc_tx_no;
uint32_t asic_rev;
uint8_t rf_rev;
usbd_xfer_handle amrr_xfer;
usbd_pipe_handle sc_rx_pipeh;
usbd_pipe_handle sc_tx_pipeh;
enum ieee80211_state sc_state;
int sc_arg;
int sc_scan_action; /* should be an enum */
struct usb_task sc_task;
struct usb_task sc_scantask;
struct ieee80211_amrr amrr;
struct ieee80211_amrr_node amn;
struct ural_rx_data rx_data[RAL_RX_LIST_COUNT];
struct ural_tx_data tx_data[RAL_TX_LIST_COUNT];
int tx_queued;
struct ieee80211_beacon_offsets sc_bo;
struct mtx sc_mtx;
struct callout watchdog_ch;
struct callout amrr_ch;
int sc_tx_timer;
uint16_t sta[11];
uint32_t rf_regs[4];
uint8_t txpow[14];
struct {
uint8_t val;
uint8_t reg;
} __packed bbp_prom[16];
int led_mode;
int hw_radio;
int rx_ant;
int tx_ant;
int nb_ant;
struct bpf_if *sc_drvbpf;
union {
struct ural_rx_radiotap_header th;
uint8_t pad[64];
} sc_rxtapu;
#define sc_rxtap sc_rxtapu.th
int sc_rxtap_len;
union {
struct ural_tx_radiotap_header th;
uint8_t pad[64];
} sc_txtapu;
#define sc_txtap sc_txtapu.th
int sc_txtap_len;
};
#if 0
#define RAL_LOCK(sc) mtx_lock(&(sc)->sc_mtx)
#define RAL_UNLOCK(sc) mtx_unlock(&(sc)->sc_mtx)
#else
#define RAL_LOCK(sc) do { ((sc) = (sc)); mtx_lock(&Giant); } while (0)
#define RAL_UNLOCK(sc) mtx_unlock(&Giant)
#endif