f10d3a9382
vinum_slices to the names of all slices (block device) which are under the control of vinum. The configuration will be read in from each in turn, starting with the most recently updated. Reviewed-by: jkh
205 lines
10 KiB
Bash
205 lines
10 KiB
Bash
#!/bin/sh
|
|
#
|
|
|
|
# This is rc.conf - a file full of useful variables that you can set
|
|
# to change the default startup behavior of your system.
|
|
#
|
|
# All arguments must be in double or single quotes.
|
|
#
|
|
# $Id: rc.conf,v 1.75 1999/01/13 17:32:37 joerg Exp $
|
|
|
|
##############################################################
|
|
### Important initial Boot-time options #####################
|
|
##############################################################
|
|
|
|
swapfile="NO" # Set to name of swapfile if aux swapfile desired.
|
|
apm_enable="NO" # Set to YES if you want APM enabled.
|
|
pccard_enable="NO" # Set to YES if you want to configure PCCARD devices.
|
|
pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address.
|
|
pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO).
|
|
local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs.
|
|
local_periodic="/usr/local/etc/periodic /usr/X11R6/etc/periodic" # periodic script dirs
|
|
|
|
|
|
##############################################################
|
|
### Network configuration sub-section ######################
|
|
##############################################################
|
|
|
|
### Basic network options: ###
|
|
hostname="myname.my.domain" # Set this!
|
|
nisdomainname="NO" # Set to NIS domain if using NIS (or NO).
|
|
firewall_enable="NO" # Set to YES to enable firewall functionality
|
|
firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall)
|
|
firewall_quiet="NO" # Set to YES to suppress rule display
|
|
natd_enable="NO" # Enable natd (if firewall_enable == YES).
|
|
natd_interface="fxp0" # Public interface to use with natd.
|
|
natd_flags="" # Additional flags for natd.
|
|
tcp_extensions="NO" # Disallow RFC1323 extensions (or YES).
|
|
network_interfaces="lo0" # List of network interfaces (lo0 is loopback).
|
|
ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration.
|
|
#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
|
|
#
|
|
# If you have any sppp(4) interfaces above, you might also want to set
|
|
# the following parameters. Refer to spppcontrol(8) for their meaning.
|
|
sppp_interfaces="" # List of sppp interfaces.
|
|
#sppp_interfaces="isp0" # example: sppp over ISDN
|
|
#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'"
|
|
|
|
### Network daemon (miscellaneous) & NFS options: ###
|
|
syslogd_enable="YES" # Run syslog daemon (or NO).
|
|
syslogd_flags="" # Flags to syslogd (if enabled).
|
|
inetd_enable="YES" # Run the network daemon dispatcher (or NO).
|
|
inetd_flags="" # Optional flags to inetd.
|
|
#
|
|
# named. It may be possible to run named in a sandbox, man security for
|
|
# details.
|
|
#
|
|
named_enable="NO" # Run named, the DNS server (or NO).
|
|
named_program="named" # path to named, if you want a different one.
|
|
named_flags="" # Flags for named
|
|
#named_flags="-u bind -g bind" # Flags for named
|
|
|
|
kerberos_server_enable="NO" # Run a kerberos master server (or NO).
|
|
kadmind_server_enable="NO" # Run kadmind (or NO) -- do not run on
|
|
# a slave kerberos server
|
|
kerberos_stash="" # Is the kerberos master key stashed?
|
|
rwhod_enable="NO" # Run the rwho daemon (or NO).
|
|
rwhod_flags="" # Flags for rwhod
|
|
amd_enable="NO" # Run amd service with $amd_flags (or NO).
|
|
amd_flags="-a /net -c 1800 -k i386 -d my.domain -l syslog /host /etc/amd.map"
|
|
amd_map_program="NO" # Can be set to "ypcat -k amd.master"
|
|
nfs_client_enable="NO" # This host is an NFS client (or NO).
|
|
nfs_client_flags="-n 4" # Flags to nfsiod (if enabled).
|
|
nfs_access_cache="2" # Client cache timeout in seconds
|
|
nfs_server_enable="NO" # This host is an NFS server (or NO).
|
|
nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled).
|
|
mountd_flags="-r" # Flags to mountd (if NFS server enabled).
|
|
nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO).
|
|
rpc_lockd_enable="NO" # Run NFS rpc.lockd (*broken!*) if nfs_server.
|
|
rpc_statd_enable="YES" # Run NFS rpc.statd if nfs_server (or NO).
|
|
portmap_enable="YES" # Run the portmapper service (or NO).
|
|
portmap_flags="" # Flags to portmap (if enabled).
|
|
rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO).
|
|
keyserv_enable="NO" # Run the SecureRPC keyserver (or NO).
|
|
keyserv_flags="" # Flags to keyserv (if enabled).
|
|
rarpd_enable="NO" # Run rarpd (or NO).
|
|
rarpd_flags="" # Flags to rarpd.
|
|
xtend_enable="NO" # Run the X-10 power controller daemon.
|
|
xtend_flags="" # Flags to xtend (if enabled).
|
|
|
|
### Network Time Services options: ###
|
|
timed_enable="NO" # Run the time daemon (or NO).
|
|
timed_flags="" # Flags to timed (if enabled).
|
|
ntpdate_enable="NO" # Run the ntpdate to sync time (or NO).
|
|
ntpdate_program="ntpdate" # path to ntpdate, if you want a different one.
|
|
ntpdate_flags="" # Flags to ntpdate (if enabled).
|
|
xntpd_enable="NO" # Run xntpd Network Time Protocol (or NO).
|
|
xntpd_program="xntpd" # path to xntpd, if you want a different one.
|
|
xntpd_flags="-p /var/run/xntpd.pid" # Flags to xntpd (if enabled).
|
|
|
|
# Network Information Services (NIS) options: ###
|
|
nis_client_enable="NO" # We're an NIS client (or NO).
|
|
nis_client_flags="" # Flags to ypbind (if enabled).
|
|
nis_ypset_enable="NO" # Run ypset at boot time (or NO).
|
|
nis_ypset_flags="" # Flags to ypset (if enabled).
|
|
nis_server_enable="NO" # We're an NIS server (or NO).
|
|
nis_server_flags="" # Flags to ypserv (if enabled).
|
|
nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO).
|
|
nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled).
|
|
nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO).
|
|
nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled).
|
|
|
|
### Network routing options: ###
|
|
defaultrouter="NO" # Set to default gateway (or NO).
|
|
static_routes="" # Set to static route list (or leave empty).
|
|
gateway_enable="NO" # Set to YES if this host will be a gateway.
|
|
router_enable="NO" # Set to YES to enable a routing daemon.
|
|
router="routed" # Name of routing daemon to use if enabled.
|
|
router_flags="-q" # Flags for routing daemon.
|
|
mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf).
|
|
mrouted_flags="" # Flags for multicast routing daemon.
|
|
ipxgateway_enable="NO" # Set to YES to enable IPX routing.
|
|
ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon.
|
|
ipxrouted_flags="" # Flags for IPX routing daemon.
|
|
arpproxy_all="" # replaces obsolete kernel option ARP_PROXYALL.
|
|
forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES")
|
|
accept_sourceroute="NO" # accept source routed packets to us
|
|
|
|
### ATM interface options: ###
|
|
atm_enable="NO" # Configure ATM interfaces (or NO).
|
|
#atm_netif_hea0="atm 1" # Network interfaces for physical interface.
|
|
#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface.
|
|
#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI).
|
|
#atm_macaddr_hea0="NO" # Override physical MAC address (or NO).
|
|
#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local).
|
|
#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO).
|
|
atm_pvcs="" # Set to PVC list (or leave empty).
|
|
atm_arps="" # Set to permanent ARP list (or leave empty).
|
|
|
|
### ISDN interface options: ###
|
|
isdn_enable="NO" # Enable the ISDN subsystem (or NO).
|
|
isdn_fsdev="/dev/ttyv4" # Output device for fullscreen mode (or NO for daemon mode).
|
|
isdn_flags="-dn -d0x1f9" # Flags for isdnd
|
|
isdn_trace="NO" # Enable the ISDN trace subsystem (or NO).
|
|
isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace
|
|
|
|
### Miscellaneous network options: ###
|
|
icmp_bmcastecho="NO" # respond to broadcast ping packets
|
|
|
|
|
|
##############################################################
|
|
### System console options #################################
|
|
##############################################################
|
|
|
|
keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO).
|
|
keyrate="NO" # keyboard rate to: slow, normal, fast (or NO).
|
|
keybell="NO" # bell to duration.pitch or normal or visual (or NO).
|
|
keychange="NO" # function keys default values (or NO).
|
|
cursor="NO" # cursor type {normal|blink|destructive} (or NO).
|
|
scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO).
|
|
font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO).
|
|
font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO).
|
|
font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO).
|
|
blanktime="300" # blank time (in seconds) or "NO" to turn it off.
|
|
saver="NO" # screen saver: Uses /modules/${saver}_saver.ko
|
|
moused_enable="NO" # Run the mouse daemon.
|
|
moused_type="auto" # See man page for rc.conf(5) for available settings.
|
|
moused_port="/dev/cuaa0" # Set to your mouse port.
|
|
moused_flags="" # Any additional flags to moused.
|
|
allscreens_flags="" # Set this vidcontrol mode for all virtual screens
|
|
|
|
|
|
##############################################################
|
|
### Miscellaneous administrative options ###################
|
|
##############################################################
|
|
|
|
cron_enable="YES" # Run the periodic job daemon.
|
|
lpd_enable="NO" # Run the line printer daemon.
|
|
lpd_flags="" # Flags to lpd (if enabled).
|
|
usbd_enable="NO" # Run the usbd daemon.
|
|
usbd_flags="" # Flags to usbd (if enabled).
|
|
sendmail_enable="YES" # Run the sendmail daemon (or NO).
|
|
sendmail_flags="-bd -q30m" # -bd is pretty mandatory.
|
|
dumpdev="NO" # Device name to crashdump to (if enabled).
|
|
check_quotas="NO" # Check quotas (or NO).
|
|
accounting_enable="NO" # Turn on process accounting (or NO).
|
|
ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO).
|
|
linux_enable="NO" # Linux emulation loaded at startup (or NO).
|
|
rand_irqs="NO" # Stir the entropy pool (like "5 11" or NO).
|
|
clear_tmp_enable="NO" # Clear /tmp at startup.
|
|
ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib"
|
|
# shared library search paths
|
|
ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout"
|
|
# a.out shared library search paths
|
|
kern_securelevel_enable="NO" # kernel security level (see init(8)),
|
|
kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure
|
|
update_motd="YES" # update version info in /etc/motd (or NO)
|
|
vinum_slices="" # put in names of vinum slices to enable vinum
|
|
|
|
##############################################################
|
|
### Allow local configuration override at the very end here ##
|
|
##############################################################
|
|
if [ -f /etc/rc.conf.local ]; then
|
|
. /etc/rc.conf.local
|
|
fi
|