freebsd-skq/etc/rc.network
darrenr ea76382201 Do an ipf -y after bringing up ppp to ensure rules which mention ppp get
matched.  Moification on PR to handle ipnat not being dependant on
ipfilter_enable

PR:	22859
2001-10-20 04:46:32 +00:00

869 lines
19 KiB
Bash

#!/bin/sh -
#
# Copyright (c) 1993 The FreeBSD Project
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
# SUCH DAMAGE.
#
# $FreeBSD$
# From: @(#)netstart 5.9 (Berkeley) 3/30/91
#
# Note that almost all of the user-configurable behavior is no longer in
# this file, but rather in /etc/defaults/rc.conf. Please check that file
# first before contemplating any changes here. If you do need to change
# this file for some reason, we would like to know about it.
# First pass startup stuff.
#
network_pass1() {
echo -n 'Doing initial network setup:'
# Convert host.conf to nsswitch.conf if necessary
if [ -f "/etc/host.conf" ]; then
echo ''
echo 'Warning: /etc/host.conf is no longer used'
if [ -f "/etc/nsswitch.conf" ]; then
echo ' /etc/nsswitch.conf will be used instead'
else
echo ' /etc/nsswitch.conf will be created for you'
convert_host_conf /etc/host.conf /etc/nsswitch.conf
fi
fi
# Set the host name if it is not already set
#
if [ -z "`hostname -s`" ]; then
hostname ${hostname}
echo -n ' hostname'
fi
# Establish ipfilter ruleset as early as possible (best in
# addition to IPFILTER_DEFAULT_BLOCK in the kernel config file)
#
if /sbin/ipfstat -i > /dev/null 2>&1; then
ipfilter_in_kernel=1
else
ipfilter_in_kernel=0
fi
case "${ipfilter_enable}" in
[Yy][Ee][Ss])
if [ "${ipfilter_in_kernel}" -eq 0 ] && kldload ipl; then
ipfilter_in_kernel=1
echo "Kernel ipfilter module loaded."
elif [ "${ipfilter_in_kernel}" -eq 0 ]; then
echo "Warning: ipfilter kernel module failed to load."
fi
if [ -r "${ipfilter_rules}" ]; then
echo -n ' ipfilter';
${ipfilter_program:-/sbin/ipf -Fa -f} \
"${ipfilter_rules}" ${ipfilter_flags}
case "${ipmon_enable}" in
[Yy][Ee][Ss])
echo -n ' ipmon'
${ipmon_program:-/sbin/ipmon} ${ipmon_flags}
;;
esac
case "${ipfs_enable}" in
[Yy][Ee][Ss])
if [ -r "/var/db/ipf/ipstate.ipf" ]; then
echo -n ' ipfs';
eval ${ipfs_program:-/sbin/ipfs -R} \
${ipfs_flags}
fi
;;
esac
else
ipfilter_enable="NO"
echo -n ' NO IPF RULES'
fi
esac
case "${ipnat_enable}" in
[Yy][Ee][Ss])
if [ "${ipfilter_in_kernel}" -eq 0 ] && kldload ipl; then
ipfilter_in_kernel=1
echo "Kernel ipfilter module loaded."
elif [ "${ipfilter_in_kernel}" -eq 0 ]; then
echo "Warning: ipfilter kernel module failed to load."
fi
if [ -r "${ipnat_rules}" ]; then
echo -n ' ipnat';
eval ${ipnat_program:-/sbin/ipnat -CF -f} \
"${ipnat_rules}" ${ipnat_flags}
else
echo -n ' NO IPNAT RULES'
fi
;;
esac
# Set the domainname if we're using NIS
#
case ${nisdomainname} in
[Nn][Oo] | '')
;;
*)
domainname ${nisdomainname}
echo -n ' domain'
;;
esac
echo '.'
# Initial ATM interface configuration
#
case ${atm_enable} in
[Yy][Ee][Ss])
if [ -r /etc/rc.atm ]; then
. /etc/rc.atm
atm_pass1
fi
;;
esac
# Attempt to create cloned interfaces.
for ifn in ${cloned_interfaces}; do
ifconfig ${ifn} create
done
# Special options for sppp(4) interfaces go here. These need
# to go _before_ the general ifconfig section, since in the case
# of hardwired (no link1 flag) but required authentication, you
# cannot pass auth parameters down to the already running interface.
#
for ifn in ${sppp_interfaces}; do
eval spppcontrol_args=\$spppconfig_${ifn}
if [ -n "${spppcontrol_args}" ]; then
# The auth secrets might contain spaces; in order
# to retain the quotation, we need to eval them
# here.
eval spppcontrol ${ifn} ${spppcontrol_args}
fi
done
# gifconfig
network_gif_setup
# Set up all the network interfaces, calling startup scripts if needed
#
case ${network_interfaces} in
[Aa][Uu][Tt][Oo])
network_interfaces="`ifconfig -l`"
;;
*)
network_interfaces="${network_interfaces} ${cloned_interfaces}"
;;
esac
dhcp_interfaces=""
for ifn in ${network_interfaces}; do
if [ -r /etc/start_if.${ifn} ]; then
. /etc/start_if.${ifn}
eval showstat_$ifn=1
fi
# Do the primary ifconfig if specified
#
eval ifconfig_args=\$ifconfig_${ifn}
case ${ifconfig_args} in
'')
;;
[Dd][Hh][Cc][Pp])
# DHCP inits are done all in one go below
dhcp_interfaces="$dhcp_interfaces $ifn"
eval showstat_$ifn=1
;;
*)
ifconfig ${ifn} ${ifconfig_args}
eval showstat_$ifn=1
;;
esac
done
if [ ! -z "${dhcp_interfaces}" ]; then
${dhcp_program:-/sbin/dhclient} ${dhcp_flags} ${dhcp_interfaces}
fi
for ifn in ${network_interfaces}; do
# Check to see if aliases need to be added
#
alias=0
while : ; do
eval ifconfig_args=\$ifconfig_${ifn}_alias${alias}
if [ -n "${ifconfig_args}" ]; then
ifconfig ${ifn} ${ifconfig_args} alias
eval showstat_$ifn=1
alias=`expr ${alias} + 1`
else
break;
fi
done
# Do ipx address if specified
#
eval ifconfig_args=\$ifconfig_${ifn}_ipx
if [ -n "${ifconfig_args}" ]; then
ifconfig ${ifn} ${ifconfig_args}
eval showstat_$ifn=1
fi
done
for ifn in ${network_interfaces}; do
eval showstat=\$showstat_${ifn}
if [ ! -z ${showstat} ]; then
ifconfig ${ifn}
fi
done
# ISDN subsystem startup
#
case ${isdn_enable} in
[Yy][Ee][Ss])
if [ -r /etc/rc.isdn ]; then
. /etc/rc.isdn
fi
;;
esac
# Start user ppp if required. This must happen before natd.
#
case ${ppp_enable} in
[Yy][Ee][Ss])
# Establish ppp mode.
#
if [ "${ppp_mode}" != "ddial" -a "${ppp_mode}" != "direct" \
-a "${ppp_mode}" != "dedicated" \
-a "${ppp_mode}" != "background" ]; then
ppp_mode="auto"
fi
ppp_command="/usr/sbin/ppp -quiet -${ppp_mode}"
# Switch on NAT mode?
#
case ${ppp_nat} in
[Yy][Ee][Ss])
ppp_command="${ppp_command} -nat"
;;
esac
ppp_command="${ppp_command} ${ppp_profile}"
echo "Starting ppp as \"${ppp_user}\""
su -m ${ppp_user} -c "exec ${ppp_command}"
;;
esac
# Re-Sync ipfilter
#
case ${ipfilter_enable} in
[Yy][Ee][Ss])
${ipfilter_program:-/sbin/ipf -y}
;;
*)
case ${ipnat_enable} in
[Yy][Ee][Ss])
${ipfilter_program:-/sbin/ipf -y}
;;
esac
esac
# Initialize IP filtering using ipfw
#
if /sbin/ipfw -q flush > /dev/null 2>&1; then
firewall_in_kernel=1
else
firewall_in_kernel=0
fi
case ${firewall_enable} in
[Yy][Ee][Ss])
if [ "${firewall_in_kernel}" -eq 0 ] && kldload ipfw; then
firewall_in_kernel=1
echo 'Kernel firewall module loaded'
elif [ "${firewall_in_kernel}" -eq 0 ]; then
echo 'Warning: firewall kernel module failed to load'
fi
;;
esac
# Load the filters if required
#
case ${firewall_in_kernel} in
1)
if [ -z "${firewall_script}" ]; then
firewall_script=/etc/rc.firewall
fi
case ${firewall_enable} in
[Yy][Ee][Ss])
if [ -r "${firewall_script}" ]; then
. "${firewall_script}"
echo -n 'Firewall rules loaded, starting divert daemons:'
# Network Address Translation daemon
#
case ${natd_enable} in
[Yy][Ee][Ss])
if [ -n "${natd_interface}" ]; then
if echo ${natd_interface} | \
grep -q -E '^[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+$'; then
natd_ifarg="-a ${natd_interface}"
else
natd_ifarg="-n ${natd_interface}"
fi
echo -n ' natd'; ${natd_program:-/sbin/natd} ${natd_flags} ${natd_ifarg}
fi
;;
esac
echo '.'
elif [ "`ipfw l 65535`" = "65535 deny ip from any to any" ]; then
echo 'Warning: kernel has firewall functionality,' \
'but firewall rules are not enabled.'
echo ' All ip services are disabled.'
fi
case ${firewall_logging} in
[Yy][Ee][Ss] | '')
echo 'Firewall logging=YES'
sysctl -w net.inet.ip.fw.verbose=1 >/dev/null
;;
*)
;;
esac
;;
esac
;;
esac
# Additional ATM interface configuration
#
if [ -n "${atm_pass1_done}" ]; then
atm_pass2
fi
# Configure routing
#
case ${defaultrouter} in
[Nn][Oo] | '')
;;
*)
static_routes="default ${static_routes}"
route_default="default ${defaultrouter}"
;;
esac
# Set up any static routes. This should be done before router discovery.
#
if [ -n "${static_routes}" ]; then
for i in ${static_routes}; do
eval route_args=\$route_${i}
route add ${route_args}
done
fi
echo -n 'Additional routing options:'
case ${tcp_extensions} in
[Yy][Ee][Ss] | '')
;;
*)
echo -n ' tcp extensions=NO'
sysctl -w net.inet.tcp.rfc1323=0 >/dev/null
;;
esac
case ${icmp_bmcastecho} in
[Yy][Ee][Ss])
echo -n ' broadcast ping responses=YES'
sysctl -w net.inet.icmp.bmcastecho=1 >/dev/null
;;
esac
case ${icmp_drop_redirect} in
[Yy][Ee][Ss])
echo -n ' ignore ICMP redirect=YES'
sysctl -w net.inet.icmp.drop_redirect=1 >/dev/null
;;
esac
case ${icmp_log_redirect} in
[Yy][Ee][Ss])
echo -n ' log ICMP redirect=YES'
sysctl -w net.inet.icmp.log_redirect=1 >/dev/null
;;
esac
case ${gateway_enable} in
[Yy][Ee][Ss])
echo -n ' IP gateway=YES'
sysctl -w net.inet.ip.forwarding=1 >/dev/null
;;
esac
case ${forward_sourceroute} in
[Yy][Ee][Ss])
echo -n ' do source routing=YES'
sysctl -w net.inet.ip.sourceroute=1 >/dev/null
;;
esac
case ${accept_sourceroute} in
[Yy][Ee][Ss])
echo -n ' accept source routing=YES'
sysctl -w net.inet.ip.accept_sourceroute=1 >/dev/null
;;
esac
case ${tcp_keepalive} in
[Yy][Ee][Ss])
echo -n ' TCP keepalive=YES'
sysctl -w net.inet.tcp.always_keepalive=1 >/dev/null
;;
esac
case ${tcp_drop_synfin} in
[Yy][Ee][Ss])
echo -n ' drop SYN+FIN packets=YES'
sysctl -w net.inet.tcp.drop_synfin=1 >/dev/null
;;
esac
case ${ipxgateway_enable} in
[Yy][Ee][Ss])
echo -n ' IPX gateway=YES'
sysctl -w net.ipx.ipx.ipxforwarding=1 >/dev/null
;;
esac
case ${arpproxy_all} in
[Yy][Ee][Ss])
echo -n ' ARP proxyall=YES'
sysctl -w net.link.ether.inet.proxyall=1 >/dev/null
;;
esac
case ${ip_portrange_first} in
[Nn][Oo] | '')
;;
*)
echo -n " ip_portrange_first=$ip_portrange_first"
sysctl -w net.inet.ip.portrange.first=$ip_portrange_first >/dev/null
;;
esac
case ${ip_portrange_last} in
[Nn][Oo] | '')
;;
*)
echo -n " ip_portrange_last=$ip_portrange_last"
sysctl -w net.inet.ip.portrange.last=$ip_portrange_last >/dev/null
;;
esac
echo '.'
case ${ipsec_enable} in
[Yy][Ee][Ss])
if [ -f ${ipsec_file} ]; then
echo ' ipsec: enabled'
setkey -f ${ipsec_file}
else
echo ' ipsec: file not found'
fi
;;
esac
echo -n 'Routing daemons:'
case ${router_enable} in
[Yy][Ee][Ss])
echo -n " ${router}"; ${router} ${router_flags}
;;
esac
case ${ipxrouted_enable} in
[Yy][Ee][Ss])
echo -n ' IPXrouted'
IPXrouted ${ipxrouted_flags} > /dev/null 2>&1
;;
esac
case ${mrouted_enable} in
[Yy][Ee][Ss])
echo -n ' mrouted'; mrouted ${mrouted_flags}
;;
esac
case ${rarpd_enable} in
[Yy][Ee][Ss])
echo -n ' rarpd'; rarpd ${rarpd_flags}
;;
esac
echo '.'
# Let future generations know we made it.
#
network_pass1_done=YES
}
network_pass2() {
echo -n 'Doing additional network setup:'
case ${named_enable} in
[Yy][Ee][Ss])
echo -n ' named'; ${named_program:-named} ${named_flags}
;;
esac
case ${ntpdate_enable} in
[Yy][Ee][Ss])
echo -n ' ntpdate'
${ntpdate_program:-ntpdate} ${ntpdate_flags} >/dev/null 2>&1
;;
esac
case ${xntpd_enable} in
[Yy][Ee][Ss])
echo -n ' ntpd'; ${xntpd_program:-ntpd} ${xntpd_flags}
;;
esac
case ${timed_enable} in
[Yy][Ee][Ss])
echo -n ' timed'; timed ${timed_flags}
;;
esac
case ${portmap_enable} in
[Yy][Ee][Ss])
echo -n ' rpcbind'; ${portmap_program:-/usr/sbin/rpcbind} \
${portmap_flags}
# Start ypserv if we're an NIS server.
# Run rpc.ypxfrd and rpc.yppasswdd only on the NIS master server.
#
case ${nis_server_enable} in
[Yy][Ee][Ss])
echo -n ' ypserv'; ypserv ${nis_server_flags}
case ${nis_ypxfrd_enable} in
[Yy][Ee][Ss])
echo -n ' rpc.ypxfrd'
rpc.ypxfrd ${nis_ypxfrd_flags}
;;
esac
case ${nis_yppasswdd_enable} in
[Yy][Ee][Ss])
echo -n ' rpc.yppasswdd'
rpc.yppasswdd ${nis_yppasswdd_flags}
;;
esac
;;
esac
# Start ypbind if we're an NIS client
#
case ${nis_client_enable} in
[Yy][Ee][Ss])
echo -n ' ypbind'; ypbind ${nis_client_flags}
case ${nis_ypset_enable} in
[Yy][Ee][Ss])
echo -n ' ypset'; ypset ${nis_ypset_flags}
;;
esac
;;
esac
# Start keyserv if we are running Secure RPC
#
case ${keyserv_enable} in
[Yy][Ee][Ss])
echo -n ' keyserv'; keyserv ${keyserv_flags}
;;
esac
# Start ypupdated if we are running Secure RPC
# and we are NIS master
#
case ${rpc_ypupdated_enable} in
[Yy][Ee][Ss])
echo -n ' rpc.ypupdated'; rpc.ypupdated
;;
esac
;;
esac
# Start ATM daemons
if [ -n "${atm_pass2_done}" ]; then
atm_pass3
fi
echo '.'
network_pass2_done=YES
}
network_pass3() {
echo -n 'Starting final network daemons:'
case ${portmap_enable} in
[Yy][Ee][Ss])
case ${nfs_server_enable} in
[Yy][Ee][Ss])
# Handle absent nfs server support
nfsserver_in_kernel=0
if sysctl vfs.nfsrv >/dev/null 2>&1; then
nfsserver_in_kernel=1
else
kldload nfsserver && nfsserver_in_kernel=1
fi
if [ -r /etc/exports -a \
${nfsserver_in_kernel} -eq 1 ]; then
echo -n ' mountd'
case ${weak_mountd_authentication} in
[Yy][Ee][Ss])
mountd_flags="${mountd_flags} -n"
;;
esac
mountd ${mountd_flags}
case ${nfs_reserved_port_only} in
[Yy][Ee][Ss])
echo -n ' NFS on reserved port only=YES'
sysctl -w vfs.nfsrv.nfs_privport=1 > /dev/null
;;
esac
echo -n ' nfsd'; nfsd ${nfs_server_flags}
case ${rpc_lockd_enable} in
[Yy][Ee][Ss])
echo -n ' rpc.lockd'; rpc.lockd
;;
esac
case ${rpc_statd_enable} in
[Yy][Ee][Ss])
echo -n ' rpc.statd'; rpc.statd
;;
esac
else
echo -n ' Warning: nfs server failed'
fi
;;
*)
case ${single_mountd_enable} in
[Yy][Ee][Ss])
if [ -r /etc/exports ]; then
echo -n ' mountd'
case ${weak_mountd_authentication} in
[Yy][Ee][Ss])
mountd_flags="-n"
;;
esac
mountd ${mountd_flags}
fi
;;
esac
;;
esac
case ${nfs_client_enable} in
[Yy][Ee][Ss])
if [ -n "${nfs_access_cache}" ]; then
echo -n " NFS access cache time=${nfs_access_cache}"
sysctl -w vfs.nfs.access_cache_timeout=${nfs_access_cache} >/dev/null
fi
if [ -n "${nfs_bufpackets}" ]; then
sysctl -w vfs.nfs.bufpackets=${nfs_bufpackets} > /dev/null
fi
;;
esac
# If /var/db/mounttab exists, some nfs-server has not been
# sucessfully notified about a previous client shutdown.
# If there is no /var/db/mounttab, we do nothing.
if [ -f /var/db/mounttab ]; then
rpc.umntall -k
fi
case ${amd_enable} in
[Yy][Ee][Ss])
echo -n ' amd'
case ${amd_map_program} in
[Nn][Oo] | '')
;;
*)
amd_flags="${amd_flags} `eval\
${amd_map_program}`"
;;
esac
if [ -n "${amd_flags}" ]; then
amd -p ${amd_flags}\
> /var/run/amd.pid 2> /dev/null
else
amd 2> /dev/null
fi
;;
esac
;;
esac
case ${rwhod_enable} in
[Yy][Ee][Ss])
echo -n ' rwhod'; rwhod ${rwhod_flags}
;;
esac
# Kerberos servers run ONLY on the Kerberos server machine
case ${kerberos4_server_enable} in
[Yy][Ee][Ss])
case ${kerberos_stash} in
[Yy][Ee][Ss])
stash=-n
;;
*)
stash=
;;
esac
echo -n ' kerberosIV'
${kerberos4_server} ${stash} >> /var/log/kerberos.log &
case ${kadmind4_server_enable} in
[Yy][Ee][Ss])
echo -n ' kadmindIV'
(
sleep 20;
${kadmind4_server} ${stash} >/dev/null 2>&1 &
) &
;;
esac
unset stash_flag
;;
esac
case ${kerberos5_server_enable} in
[Yy][Ee][Ss])
echo -n ' kerberos5'
${kerberos5_server} &
case ${kadmind5_server_enable} in
[Yy][Ee][Ss])
echo -n ' kadmind5'
${kadmind5_server} &
;;
esac
;;
esac
case ${pppoed_enable} in
[Yy][Ee][Ss])
if [ -n "${pppoed_provider}" ]; then
pppoed_flags="${pppoed_flags} -p ${pppoed_provider}"
fi
echo -n ' pppoed';
/usr/libexec/pppoed ${pppoed_flags} ${pppoed_interface}
;;
esac
case ${sshd_enable} in
[Yy][Ee][Ss])
if [ ! -f /etc/ssh/ssh_host_key ]; then
echo ' creating ssh RSA host key';
/usr/bin/ssh-keygen -N "" -f /etc/ssh/ssh_host_key
fi
if [ ! -f /etc/ssh/ssh_host_dsa_key ]; then
echo ' creating ssh DSA host key';
/usr/bin/ssh-keygen -d -N "" -f /etc/ssh/ssh_host_dsa_key
fi
;;
esac
echo '.'
network_pass3_done=YES
}
network_pass4() {
echo -n 'Additional TCP options:'
case ${log_in_vain} in
[Nn][Oo] | '')
;;
*)
echo -n ' log_in_vain=YES'
sysctl -w net.inet.tcp.log_in_vain=1 >/dev/null
sysctl -w net.inet.udp.log_in_vain=1 >/dev/null
;;
esac
echo '.'
network_pass4_done=YES
}
network_gif_setup() {
case ${gif_interfaces} in
[Nn][Oo] | '')
;;
*)
for i in ${gif_interfaces}; do
eval peers=\$gifconfig_$i
case ${peers} in
'')
continue
;;
*)
ifconfig $i create >/dev/null 2>&1
ifconfig $i tunnel ${peers}
;;
esac
done
;;
esac
}
convert_host_conf() {
host_conf=$1; shift;
nsswitch_conf=$1; shift;
awk ' \
/^[:blank:]*#/ { next } \
/(hosts|local|file)/ { nsswitch[c] = "files"; c++; next } \
/(dns|bind)/ { nsswitch[c] = "dns"; c++; next } \
/nis/ { nsswitch[c] = "nis"; c++; next } \
{ printf "Warning: unrecognized line [%s]", $0 > "/dev/stderr" } \
END { \
printf "hosts: "; \
for (i in nsswitch) printf "%s ", nsswitch[i]; \
printf "\n"; \
}' < $host_conf > $nsswitch_conf
}