freebsd-skq/share/man/man4/iwi.4
sam 3569e353ca Multi-bss (aka vap) support for 802.11 devices.
Note this includes changes to all drivers and moves some device firmware
loading to use firmware(9) and a separate module (e.g. ral).  Also there
no longer are separate wlan_scan* modules; this functionality is now
bundled into the wlan module.

Supported by:	Hobnob and Marvell
Reviewed by:	many
Obtained from:	Atheros (some bits)
2008-04-20 20:35:46 +00:00

162 lines
4.9 KiB
Groff

.\" Copyright (c) 2004-2006
.\" Damien Bergamini <damien.bergamini@free.fr>. All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\" notice unmodified, this list of conditions, and the following
.\" disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\" notice, this list of conditions and the following disclaimer in the
.\" documentation and/or other materials provided with the distribution.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\" $FreeBSD$
.\"
.Dd Apri 13, 2008
.Os
.Dt IWI 4
.Sh NAME
.Nm iwi
.Nd "Intel PRO/Wireless 2200BG/2225BG/2915ABG IEEE 802.11 driver"
.Sh SYNOPSIS
To compile this driver into the kernel,
include the following lines in your
kernel configuration file:
.Bd -ragged -offset indent
.Cd "device iwi"
.Cd "device iwifw"
.Cd "device pci"
.Cd "device wlan"
.Cd "device firmware"
.Ed
.Pp
Alternatively, to load the driver as a
module at boot time, place the following line in
.Xr loader.conf 5 :
.Bd -literal -offset indent
if_iwi_load="YES"
.Ed
.Pp
In both cases, place the following line in
.Xr loader.conf 5
to acknowledge the firmware license (see below):
.Bd -literal -offset indent
legal.intel_iwi.license_ack=1
.Ed
.Sh DESCRIPTION
The
.Nm
driver provides support for
.Tn Intel
PRO/Wireless 2200BG/2915ABG MiniPCI and 2225BG PCI network adapters.
.Nm
supports
.Cm station ,
.Cm adhoc ,
and
.Cm monitor
mode operation.
Only one virtual interface may be configured at any time.
For more information on configuring this device, see
.Xr ifconfig 8 .
.Pp
This driver requires the firmware built with the
.Nm iwifw
module to work.
For the loaded firmware to be enabled for use the license at
.Pa /usr/share/doc/legal/intel_iwi/LICENSE
must be agreed by adding the following line to
.Xr loader.conf 5 :
.Pp
.Dl "legal.intel_iwi.license_ack=1"
.Sh FILES
.Bl -tag -width ".Pa /usr/share/doc/legal/intel_iwi/LICENSE" -compact
.It Pa /usr/share/doc/legal/intel_iwi/LICENSE
.Nm
firmware license
.El
.Sh EXAMPLES
Join an existing BSS network (i.e., connect to an access point):
.Pp
.Bd -literal -offset indent
ifconfig wlan create wlandev iwi0 inet 192.168.0.20 \e
netmask 0xffffff00
.Ed
.Pp
Join a specific BSS network with network name
.Dq Li my_net :
.Pp
.Dl "ifconfig wlan create wlandev iwi0 ssid my_net up"
.Pp
Join a specific BSS network with 64-bit WEP encryption:
.Bd -literal -offset indent
ifconfig wlan create wlandev iwi0 ssid my_net \e
wepmode on wepkey 0x1234567890 weptxkey 1 up
.Ed
.Pp
Join a specific BSS network with 128-bit WEP encryption:
.Bd -literal -offset indent
ifconfig wlan create wlandev iwi0 wlanmode adhoc ssid my_net \e
wepmode on wepkey 0x01020304050607080910111213 weptxkey 1
.Ed
.Sh DIAGNOSTICS
.Bl -diag
.It "iwi%d: device timeout"
The driver will reset the hardware.
This should not happen.
.It "iwi%d: firmware error"
The onboard microcontroller crashed for some reason.
The driver will reset the hardware.
This should not happen.
.It "iwi%d: timeout waiting for firmware initialization to complete"
The onboard microcontroller failed to initialize in time.
This should not happen.
.It "iwi%d: could not load firmware image '%s'"
The driver failed to load the firmware image using the
.Xr firmware 9
subsystem.
Verify the
.Xr iwifw 4
firmware module is installed and the license agreement
.Xr loader 8
tunable has been set.
.It "iwi%d: could not load boot firmware"
An attempt to upload the boot firmware image to the onboard microcontroller
failed.
This should not happen.
.It "iwi%d: could not load microcode"
An attempt to upload the microcode image to the onboard microcontroller failed.
This should not happen.
.It "iwi%d: could not load main firmware"
An attempt to upload the main firmware image to the onboard microcontroller
failed.
This should not happen.
.El
.Sh SEE ALSO
.Xr iwifw 4 ,
.Xr pci 4 ,
.Xr wlan 4 ,
.Xr wlan_ccmp 4 ,
.Xr wlan_tkip 4 ,
.Xr wlan_wep 4 ,
.Xr ifconfig 8 ,
.Xr wpa_supplicant 8 .
.Sh AUTHORS
The original
.Nm
driver was written by
.An Damien Bergamini Aq damien.bergamini@free.fr