freebsd-skq/sys/mips/conf/AR933X_BASE
Adrian Chadd 87a2f105ee Make the apb.c code optional behind ar71xx_apb rather than standard.
The QCA955x has more mux interrupts going on - and the AR934x actually does,
but I cheated and assigned wlan and pcie to the same interrupt line.
They are, there's just a status register mux that I should've been using.

Luckily this isn't too bad a change in itself - almost all of the
Atheros MIPS configurations use a _BASE file to inherit from.
Except PB92, which I should really fix up at some point.

The AR934x will use the legacy apb for now until I write its replacement.

The QCA955x SoC I'm doing bring-up on will have a separate qca955x_apb.c
implementation that includes hooking into IP2/IP3 and doing further
interrupt demuxing as appropriate.
2015-01-06 07:43:07 +00:00

126 lines
3.3 KiB
Plaintext

#
# AR91XX -- Kernel configuration base file for the Atheros AR913x SoC.
#
# This file (and the hints file accompanying it) are not designed to be
# used by themselves. Instead, users of this file should create a kernel
# config file which includes this file (which gets the basic hints), then
# override the default options (adding devices as needed) and adding
# hints as needed (for example, the GPIO and LAN PHY.)
#
# $FreeBSD$
#
machine mips mips
ident AR933X_BASE
cpu CPU_MIPS4KC
makeoptions KERNLOADADDR=0x80050000
options HZ=1000
files "../atheros/files.ar71xx"
hints "AR933X_BASE.hints"
makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
# makeoptions MODULES_OVERRIDE="random gpio ar71xx if_gif if_gre if_bridge bridgestp usb wlan wlan_xauth wlan_acl wlan_wep wlan_tkip wlan_ccmp wlan_rssadapt wlan_amrr ath ath_ahb hwpmc"
makeoptions MODULES_OVERRIDE=""
options DDB
options KDB
options ALQ
options SCHED_4BSD #4BSD scheduler
options INET #InterNETworking
#options INET6 #InterNETworking
#options NFSCL #Network Filesystem Client
options PSEUDOFS #Pseudo-filesystem framework
options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
# Don't include the SCSI/CAM strings in the default build
options SCSI_NO_SENSE_STRINGS
options SCSI_NO_OP_STRINGS
# .. And no sysctl strings
options NO_SYSCTL_DESCR
# Limit IO size
options NBUF=128
# Limit UMTX hash size
# options UMTX_NUM_CHAINS=64
# PMC
#options HWPMC_HOOKS
#device hwpmc
#device hwpmc_mips24k
# options NFS_LEGACYRPC
# Debugging for use in -current
#options INVARIANTS
#options INVARIANT_SUPPORT
#options WITNESS
#options WITNESS_SKIPSPIN
options FFS #Berkeley Fast Filesystem
#options SOFTUPDATES #Enable FFS soft updates support
#options UFS_ACL #Support for access control lists
#options UFS_DIRHASH #Improve performance on big directories
options NO_FFS_SNAPSHOT # We don't require snapshot support
# Wireless NIC cards
options IEEE80211_DEBUG
options IEEE80211_SUPPORT_MESH
options IEEE80211_SUPPORT_TDMA
options IEEE80211_SUPPORT_SUPERG
options IEEE80211_ALQ # 802.11 ALQ logging support
device wlan # 802.11 support
device wlan_wep # 802.11 WEP support
device wlan_ccmp # 802.11 CCMP support
device wlan_tkip # 802.11 TKIP support
device wlan_xauth # 802.11 hostap support
# ath(4)
device ath # Atheros network device
device ath_rate_sample
device ath_ahb # Atheros host bus glue
options ATH_DEBUG
options ATH_DIAGAPI
option ATH_ENABLE_11N
option AH_DEBUG_ALQ
#device ath_hal
device ath_ar9300 # AR9330 HAL; no need for the others
option AH_DEBUG
option AH_SUPPORT_AR5416 # 11n HAL support
option AH_SUPPORT_AR9330 # Chipset support
option AH_AR5416_INTERRUPT_MITIGATION
device mii
device arge
device usb
options USB_EHCI_BIG_ENDIAN_DESC # handle big-endian byte order
options USB_DEBUG
options USB_HOST_ALIGN=32 # AR71XX (MIPS in general?) requires this
device ehci
device scbus
device umass
device da
device spibus
device ar71xx_spi
device mx25l
device ar71xx_wdog
device uart
device uart_ar933x
device ar71xx_apb
device loop
device ether
device md
device bpf
device random
device if_bridge
device gpio
device gpioled