freebsd-skq/sys/sys/agpio.h
John Baldwin 9f9ccd206d Add simple support for AGP 3.0 including enabling 8x mode. The simple
part of the support is that it still assumes one master and one target
where as AGP 3.0 actually supports multiple devices on the bus.

Submitted by:	Keith Whitwell <keith@tungstengraphics.com>
Sponsored by:	The Weather Channel
2003-10-23 18:08:56 +00:00

150 lines
5.7 KiB
C

/*-
* Copyright (c) 2000 Doug Rabson
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _SYS_AGPIO_H_
#define _SYS_AGPIO_H_
/*
* The AGP gatt uses 4k pages irrespective of the host page size.
*/
#define AGP_PAGE_SIZE 4096
#define AGP_PAGE_SHIFT 12
/*
* Macros to manipulate AGP mode words.
*
* SBA = Sideband Address Port
* FW = Fast Writes
*/
#define AGP_MODE_GET_RQ(x) (((x) & 0xff000000U) >> 24)
#define AGP_MODE_GET_ARQSZ(x) (((x) & 0x0000e000U) >> 13)
#define AGP_MODE_GET_CAL(x) (((x) & 0x00001c00U) >> 10)
#define AGP_MODE_GET_SBA(x) (((x) & 0x00000200U) >> 9)
#define AGP_MODE_GET_AGP(x) (((x) & 0x00000100U) >> 8)
#define AGP_MODE_GET_GART_64(x) (((x) & 0x00000080U) >> 7)
#define AGP_MODE_GET_OVER_4G(x) (((x) & 0x00000020U) >> 5)
#define AGP_MODE_GET_FW(x) (((x) & 0x00000010U) >> 4)
#define AGP_MODE_GET_MODE_3(x) (((x) & 0x00000008U) >> 3)
#define AGP_MODE_GET_RATE(x) ((x) & 0x00000007U)
#define AGP_MODE_SET_RQ(x,v) (((x) & ~0xff000000U) | ((v) << 24))
#define AGP_MODE_SET_ARQSZ(x,v) (((x) & ~0x0000e000U) | ((v) << 13))
#define AGP_MODE_SET_CAL(x,v) (((x) & ~0x00001c00U) | ((v) << 10))
#define AGP_MODE_SET_SBA(x,v) (((x) & ~0x00000200U) | ((v) << 9))
#define AGP_MODE_SET_AGP(x,v) (((x) & ~0x00000100U) | ((v) << 8))
#define AGP_MODE_SET_GART_64(x,v) (((x) & ~0x00000080U) | ((v) << 7))
#define AGP_MODE_SET_OVER_4G(x,v) (((x) & ~0x00000020U) | ((v) << 5))
#define AGP_MODE_SET_FW(x,v) (((x) & ~0x00000010U) | ((v) << 4))
#define AGP_MODE_SET_MODE_3(x,v) (((x) & ~0x00000008U) | ((v) << 3))
#define AGP_MODE_SET_RATE(x,v) (((x) & ~0x00000007U) | (v))
#define AGP_MODE_V2_RATE_1x 0x00000001
#define AGP_MODE_V2_RATE_2x 0x00000002
#define AGP_MODE_V2_RATE_4x 0x00000004
#define AGP_MODE_V3_RATE_4x 0x00000001
#define AGP_MODE_V3_RATE_8x 0x00000002
#define AGP_MODE_V3_RATE_RSVD 0x00000004
/* XXX: Compat */
#define AGP_MODE_GET_4G(x) AGP_MODE_GET_OVER_4G(x)
#define AGP_MODE_SET_4G(x) AGP_MODE_SET_OVER_4G(x)
#define AGP_MODE_RATE_1x AGP_MODE_V2_RATE_1x
#define AGP_MODE_RATE_2x AGP_MODE_V2_RATE_2x
#define AGP_MODE_RATE_4x AGP_MODE_V2_RATE_4x
#define AGPIOC_BASE 'A'
#define AGPIOC_INFO _IOR (AGPIOC_BASE, 0, agp_info)
#define AGPIOC_ACQUIRE _IO (AGPIOC_BASE, 1)
#define AGPIOC_RELEASE _IO (AGPIOC_BASE, 2)
#define AGPIOC_SETUP _IOW (AGPIOC_BASE, 3, agp_setup)
#if 0
#define AGPIOC_RESERVE _IOW (AGPIOC_BASE, 4, agp_region)
#define AGPIOC_PROTECT _IOW (AGPIOC_BASE, 5, agp_region)
#endif
#define AGPIOC_ALLOCATE _IOWR(AGPIOC_BASE, 6, agp_allocate)
#define AGPIOC_DEALLOCATE _IOW (AGPIOC_BASE, 7, int)
#define AGPIOC_BIND _IOW (AGPIOC_BASE, 8, agp_bind)
#define AGPIOC_UNBIND _IOW (AGPIOC_BASE, 9, agp_unbind)
typedef struct _agp_version {
u_int16_t major;
u_int16_t minor;
} agp_version;
typedef struct _agp_info {
agp_version version; /* version of the driver */
u_int32_t bridge_id; /* bridge vendor/device */
u_int32_t agp_mode; /* mode info of bridge */
off_t aper_base; /* base of aperture */
size_t aper_size; /* size of aperture */
size_t pg_total; /* max pages (swap + system) */
size_t pg_system; /* max pages (system) */
size_t pg_used; /* current pages used */
} agp_info;
typedef struct _agp_setup {
u_int32_t agp_mode; /* mode info of bridge */
} agp_setup;
#if 0
/*
* The "prot" down below needs still a "sleep" flag somehow ...
*/
typedef struct _agp_segment {
off_t pg_start; /* starting page to populate */
size_t pg_count; /* number of pages */
int prot; /* prot flags for mmap */
} agp_segment;
typedef struct _agp_region {
pid_t pid; /* pid of process */
size_t seg_count; /* number of segments */
struct _agp_segment *seg_list;
} agp_region;
#endif
typedef struct _agp_allocate {
int key; /* tag of allocation */
size_t pg_count; /* number of pages */
u_int32_t type; /* 0 == normal, other devspec */
u_int32_t physical; /* device specific (some devices
* need a phys address of the
* actual page behind the gatt
* table) */
} agp_allocate;
typedef struct _agp_bind {
int key; /* tag of allocation */
off_t pg_start; /* starting page to populate */
} agp_bind;
typedef struct _agp_unbind {
int key; /* tag of allocation */
u_int32_t priority; /* priority for paging out */
} agp_unbind;
#endif /* !_SYS_AGPIO_H_ */