273191ddbc
would call ed_release_resources() when we should have called ed_detach() to properly undo the effects of prior calls to ed_attach(). This would leave a stray ed interface ifnet alive in the system, which was, well, bad, since we called if_free() on the underlying memory... Fix the ed_detach routine to cope being called in this context now. This should never come up because the miibus is always there. Except for now when it seems to be failing for reasons unknown... That's a different bug that hits at least ed, xl, dc and fxp...
1110 lines
32 KiB
C
1110 lines
32 KiB
C
/*-
|
|
* Copyright (c) 2005, M. Warner Losh
|
|
* Copyright (c) 1995, David Greenman
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice unmodified, this list of conditions, and the following
|
|
* disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
/*
|
|
* Notes for adding media support. Each chipset is somewhat different
|
|
* from the others. Linux has a table of OIDs that it uses to see what
|
|
* supports the misc register of the NS83903. But a sampling of datasheets
|
|
* I could dig up on cards I own paints a different picture.
|
|
*
|
|
* Chipset specific details:
|
|
* NS 83903/902A paired
|
|
* ccr base 0x1020
|
|
* id register at 0x1000: 7-3 = 0, 2-0 = 1.
|
|
* (maybe this test is too week)
|
|
* misc register at 0x018:
|
|
* 6 WAIT_TOUTENABLE enable watchdog timeout
|
|
* 3 AUI/TPI 1 AUX, 0 TPI
|
|
* 2 loopback
|
|
* 1 gdlink (tpi mode only) 1 tp good, 0 tp bad
|
|
* 0 0-no mam, 1 mam connected
|
|
* NS83926 appears to be a NS pcmcia glue chip used on the IBM Ethernet II
|
|
* and the NEC PC9801N-J12 ccr base 0x2000!
|
|
*
|
|
* winbond 289c926
|
|
* ccr base 0xfd0
|
|
* cfb (am 0xff2):
|
|
* 0-1 PHY01 00 TPI, 01 10B2, 10 10B5, 11 TPI (reduced squ)
|
|
* 2 LNKEN 0 - enable link and auto switch, 1 disable
|
|
* 3 LNKSTS TPI + LNKEN=0 + link good == 1, else 0
|
|
* sr (am 0xff4)
|
|
* 88 00 88 00 88 00, etc
|
|
*
|
|
* TMI tc3299a (cr PHY01 == 0)
|
|
* ccr base 0x3f8
|
|
* cra (io 0xa)
|
|
* crb (io 0xb)
|
|
* 0-1 PHY01 00 auto, 01 res, 10 10B5, 11 TPI
|
|
* 2 GDLINK 1 disable checking of link
|
|
* 6 LINK 0 bad link, 1 good link
|
|
* TMI tc5299 10/100 chip, has a different MII interaction than
|
|
* dl100xx and ax88x90.
|
|
*
|
|
* EN5017A, EN5020 no data, but very popular
|
|
* Other chips?
|
|
* NetBSD supports RTL8019, but none have surfaced that I can see
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/uio.h>
|
|
|
|
#include <sys/module.h>
|
|
#include <sys/bus.h>
|
|
#include <machine/bus.h>
|
|
#include <sys/rman.h>
|
|
#include <machine/resource.h>
|
|
|
|
#include <net/ethernet.h>
|
|
#include <net/if.h>
|
|
#include <net/if_arp.h>
|
|
#include <net/if_mib.h>
|
|
#include <net/if_media.h>
|
|
|
|
#include <dev/ed/if_edreg.h>
|
|
#include <dev/ed/if_edvar.h>
|
|
#include <dev/ed/ax88x90reg.h>
|
|
#include <dev/ed/dl100xxreg.h>
|
|
#include <dev/ed/tc5299jreg.h>
|
|
#include <dev/pccard/pccardvar.h>
|
|
#include <dev/pccard/pccardreg.h>
|
|
#include <dev/pccard/pccard_cis.h>
|
|
#include <dev/mii/mii.h>
|
|
#include <dev/mii/miivar.h>
|
|
|
|
#include "card_if.h"
|
|
/* "device miibus" required. See GENERIC if you get errors here. */
|
|
#include "miibus_if.h"
|
|
#include "pccarddevs.h"
|
|
|
|
/*
|
|
* NE-2000 based PC Cards have a number of ways to get the MAC address.
|
|
* Some cards encode this as a FUNCE. Others have this in the ROMs the
|
|
* same way that ISA cards do. Some have it encoded in the attribute
|
|
* memory somewhere that isn't in the CIS. Some new chipsets have it
|
|
* in special registers in the ASIC part of the chip.
|
|
*
|
|
* For those cards that have the MAC adress stored in attribute memory,
|
|
* nearly all of them have it at a fixed offset (0xff0). We use that
|
|
* offset as a source of last resource if other offsets have failed.
|
|
*/
|
|
#define ED_DEFAULT_MAC_OFFSET 0xff0
|
|
|
|
static const struct ed_product {
|
|
struct pccard_product prod;
|
|
int flags;
|
|
#define NE2000DVF_DL100XX 0x0001 /* chip is D-Link DL10019/22 */
|
|
#define NE2000DVF_AX88X90 0x0002 /* chip is ASIX AX88[17]90 */
|
|
#define NE2000DVF_TC5299J 0x0004 /* chip is Tamarack TC5299J */
|
|
#define NE2000DVF_ENADDR 0x0100 /* Get MAC from attr mem */
|
|
#define NE2000DVF_ANYFUNC 0x0200 /* Allow any function type */
|
|
#define NE2000DVF_MODEM 0x0400 /* Has a modem/serial */
|
|
int enoff;
|
|
} ed_pccard_products[] = {
|
|
{ PCMCIA_CARD(ACCTON, EN2212), 0},
|
|
{ PCMCIA_CARD(ACCTON, EN2216), 0},
|
|
{ PCMCIA_CARD(ALLIEDTELESIS, LA_PCM), 0},
|
|
{ PCMCIA_CARD(AMBICOM, AMB8002T), 0},
|
|
{ PCMCIA_CARD(BILLIONTON, CFLT10N), 0},
|
|
{ PCMCIA_CARD(BILLIONTON, LNA100B), NE2000DVF_AX88X90},
|
|
{ PCMCIA_CARD(BILLIONTON, LNT10TN), 0},
|
|
{ PCMCIA_CARD(BROMAX, IPORT), 0},
|
|
{ PCMCIA_CARD(BROMAX, IPORT2), 0},
|
|
{ PCMCIA_CARD(BUFFALO, LPC2_CLT), 0},
|
|
{ PCMCIA_CARD(BUFFALO, LPC3_CLT), 0},
|
|
{ PCMCIA_CARD(BUFFALO, LPC3_CLX), NE2000DVF_AX88X90},
|
|
{ PCMCIA_CARD(BUFFALO, LPC4_TX), NE2000DVF_AX88X90},
|
|
{ PCMCIA_CARD(BUFFALO, LPC4_CLX), NE2000DVF_AX88X90},
|
|
{ PCMCIA_CARD(BUFFALO, LPC_CF_CLT), 0},
|
|
{ PCMCIA_CARD(CNET, NE2000), 0},
|
|
{ PCMCIA_CARD(COMPEX, AX88190), NE2000DVF_AX88X90},
|
|
{ PCMCIA_CARD(COMPEX, LANMODEM), 0},
|
|
{ PCMCIA_CARD(COMPEX, LINKPORT_ENET_B), 0},
|
|
{ PCMCIA_CARD(COREGA, ETHER_II_PCC_T), 0},
|
|
{ PCMCIA_CARD(COREGA, ETHER_II_PCC_TD), 0},
|
|
{ PCMCIA_CARD(COREGA, ETHER_PCC_T), 0},
|
|
{ PCMCIA_CARD(COREGA, ETHER_PCC_TD), 0},
|
|
{ PCMCIA_CARD(COREGA, FAST_ETHER_PCC_TX), NE2000DVF_DL100XX},
|
|
{ PCMCIA_CARD(COREGA, FETHER_PCC_TXD), NE2000DVF_AX88X90},
|
|
{ PCMCIA_CARD(COREGA, FETHER_PCC_TXF), NE2000DVF_DL100XX},
|
|
{ PCMCIA_CARD(COREGA, FETHER_II_PCC_TXD), NE2000DVF_AX88X90},
|
|
{ PCMCIA_CARD(COREGA, LAPCCTXD), 0},
|
|
{ PCMCIA_CARD(DAYNA, COMMUNICARD_E_1), 0},
|
|
{ PCMCIA_CARD(DAYNA, COMMUNICARD_E_2), 0},
|
|
{ PCMCIA_CARD(DLINK, DE650), 0 },
|
|
{ PCMCIA_CARD(DLINK, DE660), 0 },
|
|
{ PCMCIA_CARD(DLINK, DE660PLUS), 0},
|
|
{ PCMCIA_CARD(DYNALINK, L10C), 0},
|
|
{ PCMCIA_CARD(EDIMAX, EP4000A), 0},
|
|
{ PCMCIA_CARD(EPSON, EEN10B), NE2000DVF_ENADDR, 0xff0},
|
|
{ PCMCIA_CARD(EXP, THINLANCOMBO), 0},
|
|
{ PCMCIA_CARD(GLOBALVILLAGE, LANMODEM), 0},
|
|
{ PCMCIA_CARD(GREY_CELL, TDK3000), 0},
|
|
{ PCMCIA_CARD(GREY_CELL, DMF650TX),
|
|
NE2000DVF_ANYFUNC | NE2000DVF_DL100XX | NE2000DVF_MODEM},
|
|
{ PCMCIA_CARD(IBM, HOME_AND_AWAY), 0},
|
|
{ PCMCIA_CARD(IBM, INFOMOVER), NE2000DVF_ENADDR, 0xff0},
|
|
{ PCMCIA_CARD(IODATA3, PCLAT), 0},
|
|
{ PCMCIA_CARD(KINGSTON, CIO10T), 0},
|
|
{ PCMCIA_CARD(KINGSTON, KNE2), 0},
|
|
{ PCMCIA_CARD(LANTECH, FASTNETTX), NE2000DVF_AX88X90},
|
|
{ PCMCIA_CARD(LINKSYS, COMBO_ECARD),
|
|
NE2000DVF_DL100XX | NE2000DVF_AX88X90},
|
|
{ PCMCIA_CARD(LINKSYS, ECARD_1), 0},
|
|
{ PCMCIA_CARD(LINKSYS, ECARD_2), 0},
|
|
{ PCMCIA_CARD(LINKSYS, ETHERFAST), NE2000DVF_DL100XX},
|
|
{ PCMCIA_CARD(LINKSYS, TRUST_COMBO_ECARD), 0},
|
|
{ PCMCIA_CARD(MACNICA, ME1_JEIDA), 0},
|
|
{ PCMCIA_CARD(MAGICRAM, ETHER), 0},
|
|
{ PCMCIA_CARD(MELCO, LPC3_CLX), NE2000DVF_AX88X90},
|
|
{ PCMCIA_CARD(MELCO, LPC3_TX), NE2000DVF_AX88X90},
|
|
{ PCMCIA_CARD(MICRORESEARCH, MR10TPC), 0},
|
|
{ PCMCIA_CARD(NDC, ND5100_E), 0},
|
|
{ PCMCIA_CARD(NETGEAR, FA410TXC), NE2000DVF_DL100XX},
|
|
/* Same ID as DLINK DFE-670TXD. 670 has DL10022, fa411 has ax88790 */
|
|
{ PCMCIA_CARD(NETGEAR, FA411), NE2000DVF_AX88X90 | NE2000DVF_DL100XX},
|
|
{ PCMCIA_CARD(NEXTCOM, NEXTHAWK), 0},
|
|
{ PCMCIA_CARD(NEWMEDIA, LANSURFER), 0},
|
|
{ PCMCIA_CARD(OEM2, ETHERNET), 0},
|
|
{ PCMCIA_CARD(OEM2, FAST_ETHERNET), NE2000DVF_AX88X90 },
|
|
{ PCMCIA_CARD(OEM2, NE2000), 0},
|
|
{ PCMCIA_CARD(PLANET, SMARTCOM2000), 0 },
|
|
{ PCMCIA_CARD(PREMAX, PE200), 0},
|
|
{ PCMCIA_CARD(PSION, LANGLOBAL),
|
|
NE2000DVF_ANYFUNC | NE2000DVF_AX88X90 | NE2000DVF_MODEM},
|
|
{ PCMCIA_CARD(RACORE, ETHERNET), 0},
|
|
{ PCMCIA_CARD(RACORE, FASTENET), NE2000DVF_AX88X90},
|
|
{ PCMCIA_CARD(RACORE, 8041TX), NE2000DVF_AX88X90 | NE2000DVF_TC5299J},
|
|
{ PCMCIA_CARD(RELIA, COMBO), 0},
|
|
{ PCMCIA_CARD(RPTI, EP400), 0},
|
|
{ PCMCIA_CARD(RPTI, EP401), 0},
|
|
{ PCMCIA_CARD(SMC, EZCARD), 0},
|
|
{ PCMCIA_CARD(SOCKET, EA_ETHER), 0},
|
|
{ PCMCIA_CARD(SOCKET, ES_1000), 0},
|
|
{ PCMCIA_CARD(SOCKET, LP_ETHER), 0},
|
|
{ PCMCIA_CARD(SOCKET, LP_ETHER_CF), 0},
|
|
{ PCMCIA_CARD(SOCKET, LP_ETH_10_100_CF), NE2000DVF_DL100XX},
|
|
{ PCMCIA_CARD(SVEC, COMBOCARD), 0},
|
|
{ PCMCIA_CARD(SVEC, LANCARD), 0},
|
|
{ PCMCIA_CARD(TAMARACK, ETHERNET), 0},
|
|
{ PCMCIA_CARD(TDK, CFE_10), 0},
|
|
{ PCMCIA_CARD(TDK, LAK_CD031), 0},
|
|
{ PCMCIA_CARD(TDK, DFL5610WS), 0},
|
|
{ PCMCIA_CARD(TELECOMDEVICE, LM5LT), 0 },
|
|
{ PCMCIA_CARD(TELECOMDEVICE, TCD_HPC100), NE2000DVF_AX88X90},
|
|
{ PCMCIA_CARD(ZONET, ZEN), 0},
|
|
{ { NULL } }
|
|
};
|
|
|
|
/*
|
|
* PC Card (PCMCIA) specific code.
|
|
*/
|
|
static int ed_pccard_probe(device_t);
|
|
static int ed_pccard_attach(device_t);
|
|
|
|
static int ed_pccard_dl100xx(device_t dev, const struct ed_product *);
|
|
static void ed_pccard_dl100xx_mii_reset(struct ed_softc *sc);
|
|
static u_int ed_pccard_dl100xx_mii_readbits(struct ed_softc *sc, int nbits);
|
|
static void ed_pccard_dl100xx_mii_writebits(struct ed_softc *sc, u_int val,
|
|
int nbits);
|
|
|
|
static int ed_pccard_ax88x90(device_t dev, const struct ed_product *);
|
|
static void ed_pccard_ax88x90_mii_reset(struct ed_softc *sc);
|
|
static u_int ed_pccard_ax88x90_mii_readbits(struct ed_softc *sc, int nbits);
|
|
static void ed_pccard_ax88x90_mii_writebits(struct ed_softc *sc, u_int val,
|
|
int nbits);
|
|
|
|
static int ed_miibus_readreg(device_t dev, int phy, int reg);
|
|
static int ed_ifmedia_upd(struct ifnet *);
|
|
static void ed_ifmedia_sts(struct ifnet *, struct ifmediareq *);
|
|
|
|
static int ed_pccard_tc5299j(device_t dev, const struct ed_product *);
|
|
static void ed_pccard_tc5299j_mii_reset(struct ed_softc *sc);
|
|
static u_int ed_pccard_tc5299j_mii_readbits(struct ed_softc *sc, int nbits);
|
|
static void ed_pccard_tc5299j_mii_writebits(struct ed_softc *sc, u_int val,
|
|
int nbits);
|
|
|
|
static void
|
|
ed_pccard_print_entry(const struct ed_product *pp)
|
|
{
|
|
int i;
|
|
|
|
printf("Product entry: ");
|
|
if (pp->prod.pp_name)
|
|
printf("name='%s',", pp->prod.pp_name);
|
|
printf("vendor=%#x,product=%#x", pp->prod.pp_vendor,
|
|
pp->prod.pp_product);
|
|
for (i = 0; i < 4; i++)
|
|
if (pp->prod.pp_cis[i])
|
|
printf(",CIS%d='%s'", i, pp->prod.pp_cis[i]);
|
|
printf("\n");
|
|
}
|
|
|
|
static int
|
|
ed_pccard_probe(device_t dev)
|
|
{
|
|
const struct ed_product *pp, *pp2;
|
|
int error, first = 1;
|
|
uint32_t fcn = PCCARD_FUNCTION_UNSPEC;
|
|
|
|
/* Make sure we're a network function */
|
|
error = pccard_get_function(dev, &fcn);
|
|
if (error != 0)
|
|
return (error);
|
|
|
|
if ((pp = (const struct ed_product *) pccard_product_lookup(dev,
|
|
(const struct pccard_product *) ed_pccard_products,
|
|
sizeof(ed_pccard_products[0]), NULL)) != NULL) {
|
|
if (pp->prod.pp_name != NULL)
|
|
device_set_desc(dev, pp->prod.pp_name);
|
|
/*
|
|
* Some devices don't ID themselves as network, but
|
|
* that's OK if the flags say so.
|
|
*/
|
|
if (!(pp->flags & NE2000DVF_ANYFUNC) &&
|
|
fcn != PCCARD_FUNCTION_NETWORK)
|
|
return (ENXIO);
|
|
/*
|
|
* Some devices match multiple entries. Report that
|
|
* as a warning to help cull the table
|
|
*/
|
|
pp2 = pp;
|
|
while ((pp2 = (const struct ed_product *)pccard_product_lookup(
|
|
dev, (const struct pccard_product *)(pp2 + 1),
|
|
sizeof(ed_pccard_products[0]), NULL)) != NULL) {
|
|
if (first) {
|
|
device_printf(dev,
|
|
"Warning: card matches multiple entries. Report to imp@freebsd.org\n");
|
|
ed_pccard_print_entry(pp);
|
|
first = 0;
|
|
}
|
|
ed_pccard_print_entry(pp2);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
return (ENXIO);
|
|
}
|
|
|
|
static int
|
|
ed_pccard_rom_mac(device_t dev, uint8_t *enaddr)
|
|
{
|
|
struct ed_softc *sc = device_get_softc(dev);
|
|
uint8_t romdata[32];
|
|
int i;
|
|
|
|
/*
|
|
* Read in the rom data at location 0. Since there are no
|
|
* NE-1000 based PC Card devices, we'll assume we're 16-bit.
|
|
*
|
|
* In researching what format this takes, I've found that the
|
|
* following appears to be true for multiple cards based on
|
|
* observation as well as datasheet digging.
|
|
*
|
|
* Data is stored in some ROM and is copied out 8 bits at a time
|
|
* into 16-bit wide locations. This means that the odd locations
|
|
* of the ROM are not used (and can be either 0 or ff).
|
|
*
|
|
* The contents appears to be as follows:
|
|
* PROM RAM
|
|
* Offset Offset What
|
|
* 0 0 ENETADDR 0
|
|
* 1 2 ENETADDR 1
|
|
* 2 4 ENETADDR 2
|
|
* 3 6 ENETADDR 3
|
|
* 4 8 ENETADDR 4
|
|
* 5 10 ENETADDR 5
|
|
* 6-13 12-26 Reserved (varies by manufacturer)
|
|
* 14 28 0x57
|
|
* 15 30 0x57
|
|
*
|
|
* Some manufacturers have another image of enetaddr from
|
|
* PROM offset 0x10 to 0x15 with 0x42 in 0x1e and 0x1f, but
|
|
* this doesn't appear to be universally documented in the
|
|
* datasheets. Some manufactuers have a card type, card config
|
|
* checksums, etc encoded into PROM offset 6-13, but deciphering it
|
|
* requires more knowledge about the exact underlying chipset than
|
|
* we possess (and maybe can possess).
|
|
*/
|
|
ed_pio_readmem(sc, 0, romdata, 32);
|
|
if (bootverbose)
|
|
printf("ROM DATA: %32D\n", romdata, " ");
|
|
if (romdata[28] != 0x57 || romdata[30] != 0x57)
|
|
return (0);
|
|
for (i = 0; i < ETHER_ADDR_LEN; i++)
|
|
enaddr[i] = romdata[i * 2];
|
|
return (1);
|
|
}
|
|
|
|
static int
|
|
ed_pccard_add_modem(device_t dev)
|
|
{
|
|
struct ed_softc *sc = device_get_softc(dev);
|
|
|
|
device_printf(dev, "Need to write this code: modem rid is %d\n",
|
|
sc->modem_rid);
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
ed_pccard_media_ioctl(struct ed_softc *sc, struct ifreq *ifr, u_long command)
|
|
{
|
|
struct mii_data *mii;
|
|
|
|
if (sc->miibus == NULL)
|
|
return (EINVAL);
|
|
mii = device_get_softc(sc->miibus);
|
|
return (ifmedia_ioctl(sc->ifp, ifr, &mii->mii_media, command));
|
|
}
|
|
|
|
|
|
static void
|
|
ed_pccard_mediachg(struct ed_softc *sc)
|
|
{
|
|
struct mii_data *mii;
|
|
|
|
if (sc->miibus == NULL)
|
|
return;
|
|
mii = device_get_softc(sc->miibus);
|
|
mii_mediachg(mii);
|
|
}
|
|
|
|
static void
|
|
ed_pccard_tick(void *arg)
|
|
{
|
|
struct ed_softc *sc = arg;
|
|
struct mii_data *mii;
|
|
int media = 0;
|
|
|
|
ED_ASSERT_LOCKED(sc);
|
|
if (sc->miibus != NULL) {
|
|
mii = device_get_softc(sc->miibus);
|
|
media = mii->mii_media_status;
|
|
mii_tick(mii);
|
|
if (mii->mii_media_status & IFM_ACTIVE &&
|
|
media != mii->mii_media_status && 0 &&
|
|
sc->chip_type == ED_CHIP_TYPE_DL10022) {
|
|
ed_asic_outb(sc, ED_DL100XX_DIAG,
|
|
(mii->mii_media_active & IFM_FDX) ?
|
|
ED_DL100XX_COLLISON_DIS : 0);
|
|
}
|
|
|
|
}
|
|
callout_reset(&sc->tick_ch, hz, ed_pccard_tick, sc);
|
|
}
|
|
|
|
static int
|
|
ed_pccard_attach(device_t dev)
|
|
{
|
|
u_char sum;
|
|
u_char enaddr[ETHER_ADDR_LEN];
|
|
const struct ed_product *pp;
|
|
int error, i;
|
|
struct ed_softc *sc = device_get_softc(dev);
|
|
u_long size;
|
|
|
|
if ((pp = (const struct ed_product *) pccard_product_lookup(dev,
|
|
(const struct pccard_product *) ed_pccard_products,
|
|
sizeof(ed_pccard_products[0]), NULL)) == NULL)
|
|
return (ENXIO);
|
|
sc->modem_rid = -1;
|
|
if (pp->flags & NE2000DVF_MODEM) {
|
|
sc->port_rid = -1;
|
|
for (i = 0; i < 4; i++) {
|
|
size = bus_get_resource_count(dev, SYS_RES_IOPORT, i);
|
|
if (size == ED_NOVELL_IO_PORTS)
|
|
sc->port_rid = i;
|
|
else if (size == 8)
|
|
sc->modem_rid = i;
|
|
}
|
|
if (sc->port_rid == -1) {
|
|
device_printf(dev, "Cannot locate my ports!\n");
|
|
return (ENXIO);
|
|
}
|
|
} else {
|
|
sc->port_rid = 0;
|
|
}
|
|
/* Allocate the port resource during setup. */
|
|
error = ed_alloc_port(dev, sc->port_rid, ED_NOVELL_IO_PORTS);
|
|
if (error)
|
|
return (error);
|
|
error = ed_alloc_irq(dev, 0, 0);
|
|
if (error)
|
|
goto bad;
|
|
|
|
/*
|
|
* Determine which chipset we are. All the PC Card chipsets have the
|
|
* ASIC and NIC offsets in the same place.
|
|
*/
|
|
sc->asic_offset = ED_NOVELL_ASIC_OFFSET;
|
|
sc->nic_offset = ED_NOVELL_NIC_OFFSET;
|
|
error = ENXIO;
|
|
if (error != 0)
|
|
error = ed_pccard_dl100xx(dev, pp);
|
|
if (error != 0)
|
|
error = ed_pccard_ax88x90(dev, pp);
|
|
if (error != 0)
|
|
error = ed_pccard_tc5299j(dev, pp);
|
|
if (error != 0)
|
|
error = ed_probe_Novell_generic(dev, device_get_flags(dev));
|
|
if (error)
|
|
goto bad;
|
|
|
|
error = bus_setup_intr(dev, sc->irq_res, INTR_TYPE_NET | INTR_MPSAFE,
|
|
NULL, edintr, sc, &sc->irq_handle);
|
|
if (error) {
|
|
device_printf(dev, "setup intr failed %d \n", error);
|
|
goto bad;
|
|
}
|
|
|
|
/*
|
|
* For the older cards, we have to get the MAC address from
|
|
* the card in some way. Let's try the standard PCMCIA way
|
|
* first. If that fails, then check to see if we have valid
|
|
* data from the standard NE-2000 data roms. If that fails,
|
|
* check to see if the card has a hint about where to look in
|
|
* its CIS. If that fails, maybe we should look at some
|
|
* default value. In all fails, we should fail the attach,
|
|
* but don't right now.
|
|
*/
|
|
if (sc->chip_type == ED_CHIP_TYPE_DP8390) {
|
|
pccard_get_ether(dev, enaddr);
|
|
if (bootverbose)
|
|
device_printf(dev, "CIS MAC %6D\n", enaddr, ":");
|
|
for (i = 0, sum = 0; i < ETHER_ADDR_LEN; i++)
|
|
sum |= enaddr[i];
|
|
if (sum == 0 && ed_pccard_rom_mac(dev, enaddr)) {
|
|
if (bootverbose)
|
|
device_printf(dev, "ROM mac %6D\n", enaddr,
|
|
":");
|
|
sum++;
|
|
}
|
|
if (sum == 0 && pp->flags & NE2000DVF_ENADDR) {
|
|
for (i = 0; i < ETHER_ADDR_LEN; i++) {
|
|
pccard_attr_read_1(dev, pp->enoff + i * 2,
|
|
enaddr + i);
|
|
sum |= enaddr[i];
|
|
}
|
|
if (bootverbose)
|
|
device_printf(dev, "Hint %x MAC %6D\n",
|
|
pp->enoff, enaddr, ":");
|
|
}
|
|
if (sum == 0) {
|
|
for (i = 0; i < ETHER_ADDR_LEN; i++) {
|
|
pccard_attr_read_1(dev, ED_DEFAULT_MAC_OFFSET +
|
|
i * 2, enaddr + i);
|
|
sum |= enaddr[i];
|
|
}
|
|
if (bootverbose)
|
|
device_printf(dev, "Fallback MAC %6D\n",
|
|
enaddr, ":");
|
|
}
|
|
if (sum == 0) {
|
|
device_printf(dev, "Cannot extract MAC address.\n");
|
|
ed_release_resources(dev);
|
|
return (ENXIO);
|
|
}
|
|
bcopy(enaddr, sc->enaddr, ETHER_ADDR_LEN);
|
|
}
|
|
|
|
error = ed_attach(dev);
|
|
if (error)
|
|
goto bad;
|
|
if (sc->chip_type == ED_CHIP_TYPE_DL10019 ||
|
|
sc->chip_type == ED_CHIP_TYPE_DL10022) {
|
|
/* Probe for an MII bus, but ignore errors. */
|
|
ed_pccard_dl100xx_mii_reset(sc);
|
|
(void)mii_phy_probe(dev, &sc->miibus, ed_ifmedia_upd,
|
|
ed_ifmedia_sts);
|
|
} else if (sc->chip_type == ED_CHIP_TYPE_AX88190) {
|
|
ed_pccard_ax88x90_mii_reset(sc);
|
|
if ((error = mii_phy_probe(dev, &sc->miibus, ed_ifmedia_upd,
|
|
ed_ifmedia_sts)) != 0) {
|
|
device_printf(dev, "Missing mii!\n");
|
|
goto bad;
|
|
}
|
|
|
|
} else if (sc->chip_type == ED_CHIP_TYPE_TC5299J) {
|
|
ed_pccard_tc5299j_mii_reset(sc);
|
|
if ((error = mii_phy_probe(dev, &sc->miibus, ed_ifmedia_upd,
|
|
ed_ifmedia_sts)) != 0) {
|
|
device_printf(dev, "Missing mii!\n");
|
|
goto bad;
|
|
}
|
|
|
|
}
|
|
if (sc->miibus != NULL) {
|
|
sc->sc_tick = ed_pccard_tick;
|
|
sc->sc_mediachg = ed_pccard_mediachg;
|
|
sc->sc_media_ioctl = ed_pccard_media_ioctl;
|
|
}
|
|
if (sc->modem_rid != -1)
|
|
ed_pccard_add_modem(dev);
|
|
return (0);
|
|
bad:
|
|
ed_detach(dev);
|
|
return (error);
|
|
}
|
|
|
|
/*
|
|
* Probe the Ethernet MAC addrees for PCMCIA Linksys EtherFast 10/100
|
|
* and compatible cards (DL10019C Ethernet controller).
|
|
*
|
|
* Note: The PAO patches try to use more memory for the card, but that
|
|
* seems to fail for my card. A future optimization would add this back
|
|
* conditionally.
|
|
*/
|
|
static int
|
|
ed_pccard_dl100xx(device_t dev, const struct ed_product *pp)
|
|
{
|
|
struct ed_softc *sc = device_get_softc(dev);
|
|
u_char sum;
|
|
uint8_t id;
|
|
int i, error;
|
|
|
|
if (!(pp->flags & NE2000DVF_DL100XX))
|
|
return (ENXIO);
|
|
if (bootverbose)
|
|
device_printf(dev, "Trying DL100xx probing\n");
|
|
error = ed_probe_Novell_generic(dev, device_get_flags(dev));
|
|
if (bootverbose && error)
|
|
device_printf(dev, "Novell generic probe failed: %d\n", error);
|
|
if (error != 0)
|
|
return (error);
|
|
|
|
/*
|
|
* Linksys registers(offset from ASIC base)
|
|
*
|
|
* 0x04-0x09 : Physical Address Register 0-5 (PAR0-PAR5)
|
|
* 0x0A : Card ID Register (CIR)
|
|
* 0x0B : Check Sum Register (SR)
|
|
*/
|
|
for (sum = 0, i = 0x04; i < 0x0c; i++)
|
|
sum += ed_asic_inb(sc, i);
|
|
if (sum != 0xff) {
|
|
if (bootverbose)
|
|
device_printf(dev, "Bad checksum %#x\n", sum);
|
|
return (ENXIO); /* invalid DL10019C */
|
|
}
|
|
if (bootverbose)
|
|
device_printf(dev, "CIR is %d\n", ed_asic_inb(sc, 0xa));
|
|
for (i = 0; i < ETHER_ADDR_LEN; i++)
|
|
sc->enaddr[i] = ed_asic_inb(sc, 0x04 + i);
|
|
ed_nic_outb(sc, ED_P0_DCR, ED_DCR_WTS | ED_DCR_FT1 | ED_DCR_LS);
|
|
id = ed_asic_inb(sc, 0xf);
|
|
sc->isa16bit = 1;
|
|
sc->vendor = ED_VENDOR_NOVELL;
|
|
sc->type = ED_TYPE_NE2000;
|
|
sc->chip_type = (id & 0x90) == 0x90 ?
|
|
ED_CHIP_TYPE_DL10022 : ED_CHIP_TYPE_DL10019;
|
|
sc->type_str = ((id & 0x90) == 0x90) ? "DL10022" : "DL10019";
|
|
sc->mii_readbits = ed_pccard_dl100xx_mii_readbits;
|
|
sc->mii_writebits = ed_pccard_dl100xx_mii_writebits;
|
|
return (0);
|
|
}
|
|
|
|
/* MII bit-twiddling routines for cards using Dlink chipset */
|
|
#define DL100XX_MIISET(sc, x) ed_asic_outb(sc, ED_DL100XX_MIIBUS, \
|
|
ed_asic_inb(sc, ED_DL100XX_MIIBUS) | (x))
|
|
#define DL100XX_MIICLR(sc, x) ed_asic_outb(sc, ED_DL100XX_MIIBUS, \
|
|
ed_asic_inb(sc, ED_DL100XX_MIIBUS) & ~(x))
|
|
|
|
static void
|
|
ed_pccard_dl100xx_mii_reset(struct ed_softc *sc)
|
|
{
|
|
if (sc->chip_type != ED_CHIP_TYPE_DL10022)
|
|
return;
|
|
|
|
ed_asic_outb(sc, ED_DL100XX_MIIBUS, ED_DL100XX_MII_RESET2);
|
|
DELAY(10);
|
|
ed_asic_outb(sc, ED_DL100XX_MIIBUS,
|
|
ED_DL100XX_MII_RESET2 | ED_DL100XX_MII_RESET1);
|
|
DELAY(10);
|
|
ed_asic_outb(sc, ED_DL100XX_MIIBUS, ED_DL100XX_MII_RESET2);
|
|
DELAY(10);
|
|
ed_asic_outb(sc, ED_DL100XX_MIIBUS,
|
|
ED_DL100XX_MII_RESET2 | ED_DL100XX_MII_RESET1);
|
|
DELAY(10);
|
|
ed_asic_outb(sc, ED_DL100XX_MIIBUS, 0);
|
|
}
|
|
|
|
static void
|
|
ed_pccard_dl100xx_mii_writebits(struct ed_softc *sc, u_int val, int nbits)
|
|
{
|
|
int i;
|
|
|
|
if (sc->chip_type == ED_CHIP_TYPE_DL10022)
|
|
DL100XX_MIISET(sc, ED_DL100XX_MII_DIROUT_22);
|
|
else
|
|
DL100XX_MIISET(sc, ED_DL100XX_MII_DIROUT_19);
|
|
|
|
for (i = nbits - 1; i >= 0; i--) {
|
|
if ((val >> i) & 1)
|
|
DL100XX_MIISET(sc, ED_DL100XX_MII_DATAOUT);
|
|
else
|
|
DL100XX_MIICLR(sc, ED_DL100XX_MII_DATAOUT);
|
|
DELAY(10);
|
|
DL100XX_MIISET(sc, ED_DL100XX_MII_CLK);
|
|
DELAY(10);
|
|
DL100XX_MIICLR(sc, ED_DL100XX_MII_CLK);
|
|
DELAY(10);
|
|
}
|
|
}
|
|
|
|
static u_int
|
|
ed_pccard_dl100xx_mii_readbits(struct ed_softc *sc, int nbits)
|
|
{
|
|
int i;
|
|
u_int val = 0;
|
|
|
|
if (sc->chip_type == ED_CHIP_TYPE_DL10022)
|
|
DL100XX_MIICLR(sc, ED_DL100XX_MII_DIROUT_22);
|
|
else
|
|
DL100XX_MIICLR(sc, ED_DL100XX_MII_DIROUT_19);
|
|
|
|
for (i = nbits - 1; i >= 0; i--) {
|
|
DL100XX_MIISET(sc, ED_DL100XX_MII_CLK);
|
|
DELAY(10);
|
|
val <<= 1;
|
|
if (ed_asic_inb(sc, ED_DL100XX_MIIBUS) & ED_DL100XX_MII_DATAIN)
|
|
val++;
|
|
DL100XX_MIICLR(sc, ED_DL100XX_MII_CLK);
|
|
DELAY(10);
|
|
}
|
|
return val;
|
|
}
|
|
|
|
static int
|
|
ed_pccard_ax88x90_geteprom(struct ed_softc *sc)
|
|
{
|
|
int prom[16],i;
|
|
u_char tmp;
|
|
struct {
|
|
unsigned char offset, value;
|
|
} pg_seq[] = {
|
|
/* Select Page0 */
|
|
{ED_P0_CR, ED_CR_RD2 | ED_CR_STP | ED_CR_PAGE_0},
|
|
{ED_P0_DCR, 0x01},
|
|
{ED_P0_RBCR0, 0x00}, /* Clear the count regs. */
|
|
{ED_P0_RBCR1, 0x00},
|
|
{ED_P0_IMR, 0x00}, /* Mask completion irq. */
|
|
{ED_P0_ISR, 0xff},
|
|
{ED_P0_RCR, ED_RCR_MON | ED_RCR_INTT}, /* Set To Monitor */
|
|
{ED_P0_TCR, ED_TCR_LB0}, /* loopback mode. */
|
|
{ED_P0_RBCR0, 32},
|
|
{ED_P0_RBCR1, 0x00},
|
|
{ED_P0_RSAR0, 0x00},
|
|
{ED_P0_RSAR1, 0x04},
|
|
{ED_P0_CR, ED_CR_RD0 | ED_CR_STA | ED_CR_PAGE_0},
|
|
};
|
|
|
|
/* Reset Card */
|
|
tmp = ed_asic_inb(sc, ED_NOVELL_RESET);
|
|
ed_asic_outb(sc, ED_NOVELL_RESET, tmp);
|
|
DELAY(5000);
|
|
ed_nic_outb(sc, ED_P0_CR, ED_CR_RD2 | ED_CR_STP | ED_CR_PAGE_0);
|
|
DELAY(5000);
|
|
|
|
/* Card Settings */
|
|
for (i = 0; i < sizeof(pg_seq) / sizeof(pg_seq[0]); i++)
|
|
ed_nic_outb(sc, pg_seq[i].offset, pg_seq[i].value);
|
|
|
|
/* Get Data */
|
|
for (i = 0; i < ETHER_ADDR_LEN / 2; i++)
|
|
prom[i] = ed_asic_inw(sc, 0);
|
|
for (i = 0; i < ETHER_ADDR_LEN; i += 2) {
|
|
sc->enaddr[i] = prom[i / 2] & 0xff;
|
|
sc->enaddr[i + 1] = (prom[i / 2] >> 8) & 0xff;
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Special setup for AX88[17]90
|
|
*/
|
|
static int
|
|
ed_pccard_ax88x90(device_t dev, const struct ed_product *pp)
|
|
{
|
|
int error, iobase, i, id;
|
|
char *ts;
|
|
struct ed_softc *sc = device_get_softc(dev);
|
|
|
|
if (!(pp->flags & NE2000DVF_AX88X90))
|
|
return (ENXIO);
|
|
|
|
if (bootverbose)
|
|
device_printf(dev, "Checking AX88x90\n");
|
|
|
|
/*
|
|
* Set the IOBASE Register. The AX88x90 cards are potentially
|
|
* multifunction cards, and thus requires a slight workaround.
|
|
* We write the address the card is at.
|
|
*/
|
|
iobase = rman_get_start(sc->port_res);
|
|
pccard_ccr_write_1(dev, PCCARD_CCR_IOBASE0, iobase & 0xff);
|
|
pccard_ccr_write_1(dev, PCCARD_CCR_IOBASE1, (iobase >> 8) & 0xff);
|
|
|
|
ts = "AX88190";
|
|
if (ed_asic_inb(sc, ED_AX88X90_TEST) != 0) {
|
|
/*
|
|
* AX88790 (and I think AX88190A) chips need to be
|
|
* powered down. There's an erratum that says we should
|
|
* power down the PHY for 2.5s, but this seems to power
|
|
* down the whole card. I'm unsure why this was done, but
|
|
* appears to be required for proper operation.
|
|
*/
|
|
pccard_ccr_write_1(dev, PCCARD_CCR_STATUS,
|
|
PCCARD_CCR_STATUS_PWRDWN);
|
|
/*
|
|
* Linux axnet driver selects the internal phy for the ax88790
|
|
*/
|
|
ed_asic_outb(sc, ED_AX88X90_GPIO, ED_AX88X90_GPIO_INT_PHY);
|
|
ts = "AX88790";
|
|
}
|
|
|
|
/*
|
|
* Check to see if we have a MII PHY ID at any of the first 17
|
|
* locations. All AX88x90 devices have MII and a PHY, so we use
|
|
* this to weed out chips that would otherwise make it through
|
|
* the tests we have after this point.
|
|
*/
|
|
sc->mii_readbits = ed_pccard_ax88x90_mii_readbits;
|
|
sc->mii_writebits = ed_pccard_ax88x90_mii_writebits;
|
|
for (i = 0; i < 17; i++) {
|
|
id = ed_miibus_readreg(dev, i, MII_PHYIDR1);
|
|
if (id != 0 && id != 0xffff)
|
|
break;
|
|
}
|
|
if (i == 17) {
|
|
sc->mii_readbits = 0;
|
|
sc->mii_writebits = 0;
|
|
return (ENXIO);
|
|
}
|
|
|
|
sc->chip_type = ED_CHIP_TYPE_AX88190;
|
|
error = ed_pccard_ax88x90_geteprom(sc);
|
|
if (error)
|
|
return (error);
|
|
error = ed_probe_Novell_generic(dev, device_get_flags(dev));
|
|
if (bootverbose)
|
|
device_printf(dev, "probe novel returns %d\n", error);
|
|
if (error == 0) {
|
|
sc->vendor = ED_VENDOR_NOVELL;
|
|
sc->type = ED_TYPE_NE2000;
|
|
sc->chip_type = ED_CHIP_TYPE_AX88190;
|
|
sc->type_str = ts;
|
|
}
|
|
return (error);
|
|
}
|
|
|
|
/* MII bit-twiddling routines for cards using AX88x90 chipset */
|
|
#define AX88X90_MIISET(sc, x) ed_asic_outb(sc, ED_AX88X90_MIIBUS, \
|
|
ed_asic_inb(sc, ED_AX88X90_MIIBUS) | (x))
|
|
#define AX88X90_MIICLR(sc, x) ed_asic_outb(sc, ED_AX88X90_MIIBUS, \
|
|
ed_asic_inb(sc, ED_AX88X90_MIIBUS) & ~(x))
|
|
|
|
static void
|
|
ed_pccard_ax88x90_mii_reset(struct ed_softc *sc)
|
|
{
|
|
/* Do nothing! */
|
|
}
|
|
|
|
static void
|
|
ed_pccard_ax88x90_mii_writebits(struct ed_softc *sc, u_int val, int nbits)
|
|
{
|
|
int i;
|
|
|
|
AX88X90_MIICLR(sc, ED_AX88X90_MII_DIROUT);
|
|
for (i = nbits - 1; i >= 0; i--) {
|
|
if ((val >> i) & 1)
|
|
AX88X90_MIISET(sc, ED_AX88X90_MII_DATAOUT);
|
|
else
|
|
AX88X90_MIICLR(sc, ED_AX88X90_MII_DATAOUT);
|
|
DELAY(10);
|
|
AX88X90_MIISET(sc, ED_AX88X90_MII_CLK);
|
|
DELAY(10);
|
|
AX88X90_MIICLR(sc, ED_AX88X90_MII_CLK);
|
|
DELAY(10);
|
|
}
|
|
}
|
|
|
|
static u_int
|
|
ed_pccard_ax88x90_mii_readbits(struct ed_softc *sc, int nbits)
|
|
{
|
|
int i;
|
|
u_int val = 0;
|
|
|
|
AX88X90_MIISET(sc, ED_AX88X90_MII_DIROUT);
|
|
for (i = nbits - 1; i >= 0; i--) {
|
|
AX88X90_MIISET(sc, ED_AX88X90_MII_CLK);
|
|
DELAY(10);
|
|
val <<= 1;
|
|
if (ed_asic_inb(sc, ED_AX88X90_MIIBUS) & ED_AX88X90_MII_DATAIN)
|
|
val++;
|
|
AX88X90_MIICLR(sc, ED_AX88X90_MII_CLK);
|
|
DELAY(10);
|
|
}
|
|
return val;
|
|
}
|
|
|
|
/*
|
|
* Special setup for TC5299J
|
|
*/
|
|
static int
|
|
ed_pccard_tc5299j(device_t dev, const struct ed_product *pp)
|
|
{
|
|
int error, i, id;
|
|
char *ts;
|
|
struct ed_softc *sc = device_get_softc(dev);
|
|
|
|
if (!(pp->flags & NE2000DVF_TC5299J))
|
|
return (ENXIO);
|
|
|
|
if (bootverbose)
|
|
device_printf(dev, "Checking Tc5299j\n");
|
|
|
|
/*
|
|
* Check to see if we have a MII PHY ID at any of the first 32
|
|
* locations. All TC5299J devices have MII and a PHY, so we use
|
|
* this to weed out chips that would otherwise make it through
|
|
* the tests we have after this point.
|
|
*/
|
|
sc->mii_readbits = ed_pccard_tc5299j_mii_readbits;
|
|
sc->mii_writebits = ed_pccard_tc5299j_mii_writebits;
|
|
for (i = 0; i < 32; i++) {
|
|
id = ed_miibus_readreg(dev, i, MII_PHYIDR1);
|
|
if (id != 0 && id != 0xffff)
|
|
break;
|
|
}
|
|
if (i == 32) {
|
|
sc->mii_readbits = 0;
|
|
sc->mii_writebits = 0;
|
|
return (ENXIO);
|
|
}
|
|
|
|
ts = "TC5299J";
|
|
error = ed_probe_Novell_generic(dev, device_get_flags(dev));
|
|
if (bootverbose)
|
|
device_printf(dev, "probe novel returns %d\n", error);
|
|
if (error != 0) {
|
|
sc->mii_readbits = 0;
|
|
sc->mii_writebits = 0;
|
|
return (error);
|
|
}
|
|
if (ed_pccard_rom_mac(dev, sc->enaddr) == 0) {
|
|
sc->mii_readbits = 0;
|
|
sc->mii_writebits = 0;
|
|
return (ENXIO);
|
|
}
|
|
sc->vendor = ED_VENDOR_NOVELL;
|
|
sc->type = ED_TYPE_NE2000;
|
|
sc->chip_type = ED_CHIP_TYPE_TC5299J;
|
|
sc->type_str = ts;
|
|
return (0);
|
|
}
|
|
|
|
/* MII bit-twiddling routines for cards using TC5299J chipset */
|
|
#define TC5299J_MIISET(sc, x) ed_nic_outb(sc, ED_TC5299J_MIIBUS, \
|
|
ed_nic_inb(sc, ED_TC5299J_MIIBUS) | (x))
|
|
#define TC5299J_MIICLR(sc, x) ed_nic_outb(sc, ED_TC5299J_MIIBUS, \
|
|
ed_nic_inb(sc, ED_TC5299J_MIIBUS) & ~(x))
|
|
|
|
static void
|
|
ed_pccard_tc5299j_mii_reset(struct ed_softc *sc)
|
|
{
|
|
/* Do nothing! */
|
|
}
|
|
|
|
static void
|
|
ed_pccard_tc5299j_mii_writebits(struct ed_softc *sc, u_int val, int nbits)
|
|
{
|
|
int i;
|
|
uint8_t cr;
|
|
|
|
cr = ed_nic_inb(sc, ED_P0_CR);
|
|
ed_nic_outb(sc, ED_P0_CR, cr | ED_CR_PAGE_3);
|
|
|
|
TC5299J_MIICLR(sc, ED_TC5299J_MII_DIROUT);
|
|
for (i = nbits - 1; i >= 0; i--) {
|
|
if ((val >> i) & 1)
|
|
TC5299J_MIISET(sc, ED_TC5299J_MII_DATAOUT);
|
|
else
|
|
TC5299J_MIICLR(sc, ED_TC5299J_MII_DATAOUT);
|
|
TC5299J_MIISET(sc, ED_TC5299J_MII_CLK);
|
|
TC5299J_MIICLR(sc, ED_TC5299J_MII_CLK);
|
|
}
|
|
ed_nic_outb(sc, ED_P0_CR, cr);
|
|
}
|
|
|
|
static u_int
|
|
ed_pccard_tc5299j_mii_readbits(struct ed_softc *sc, int nbits)
|
|
{
|
|
int i;
|
|
u_int val = 0;
|
|
uint8_t cr;
|
|
|
|
cr = ed_nic_inb(sc, ED_P0_CR);
|
|
ed_nic_outb(sc, ED_P0_CR, cr | ED_CR_PAGE_3);
|
|
|
|
TC5299J_MIISET(sc, ED_TC5299J_MII_DIROUT);
|
|
for (i = nbits - 1; i >= 0; i--) {
|
|
TC5299J_MIISET(sc, ED_TC5299J_MII_CLK);
|
|
val <<= 1;
|
|
if (ed_nic_inb(sc, ED_TC5299J_MIIBUS) & ED_TC5299J_MII_DATAIN)
|
|
val++;
|
|
TC5299J_MIICLR(sc, ED_TC5299J_MII_CLK);
|
|
}
|
|
ed_nic_outb(sc, ED_P0_CR, cr);
|
|
return val;
|
|
}
|
|
|
|
/*
|
|
* MII bus support routines.
|
|
*/
|
|
static int
|
|
ed_miibus_readreg(device_t dev, int phy, int reg)
|
|
{
|
|
struct ed_softc *sc;
|
|
int failed, val;
|
|
|
|
/*
|
|
* The AX88790 seem to have phy 0..f external, and 0x10 internal.
|
|
* but they also seem to have a bogus one that shows up at phy
|
|
* 0x11 through 0x1f.
|
|
*/
|
|
if (phy >= 0x11)
|
|
return (0);
|
|
|
|
sc = device_get_softc(dev);
|
|
(*sc->mii_writebits)(sc, 0xffffffff, 32);
|
|
(*sc->mii_writebits)(sc, ED_MII_STARTDELIM, ED_MII_STARTDELIM_BITS);
|
|
(*sc->mii_writebits)(sc, ED_MII_READOP, ED_MII_OP_BITS);
|
|
(*sc->mii_writebits)(sc, phy, ED_MII_PHY_BITS);
|
|
(*sc->mii_writebits)(sc, reg, ED_MII_REG_BITS);
|
|
failed = (*sc->mii_readbits)(sc, ED_MII_ACK_BITS);
|
|
val = (*sc->mii_readbits)(sc, ED_MII_DATA_BITS);
|
|
(*sc->mii_writebits)(sc, ED_MII_IDLE, ED_MII_IDLE_BITS);
|
|
return (failed ? 0 : val);
|
|
}
|
|
|
|
static void
|
|
ed_miibus_writereg(device_t dev, int phy, int reg, int data)
|
|
{
|
|
struct ed_softc *sc;
|
|
|
|
/*
|
|
* The AX88790 seem to have phy 0..f external, and 0x10 internal.
|
|
* but they also seem to have a bogus one that shows up at phy
|
|
* 0x11 through 0x1f.
|
|
*/
|
|
if (phy >= 0x11)
|
|
return;
|
|
|
|
sc = device_get_softc(dev);
|
|
(*sc->mii_writebits)(sc, 0xffffffff, 32);
|
|
(*sc->mii_writebits)(sc, ED_MII_STARTDELIM, ED_MII_STARTDELIM_BITS);
|
|
(*sc->mii_writebits)(sc, ED_MII_WRITEOP, ED_MII_OP_BITS);
|
|
(*sc->mii_writebits)(sc, phy, ED_MII_PHY_BITS);
|
|
(*sc->mii_writebits)(sc, reg, ED_MII_REG_BITS);
|
|
(*sc->mii_writebits)(sc, ED_MII_TURNAROUND, ED_MII_TURNAROUND_BITS);
|
|
(*sc->mii_writebits)(sc, data, ED_MII_DATA_BITS);
|
|
(*sc->mii_writebits)(sc, ED_MII_IDLE, ED_MII_IDLE_BITS);
|
|
}
|
|
|
|
static int
|
|
ed_ifmedia_upd(struct ifnet *ifp)
|
|
{
|
|
struct ed_softc *sc;
|
|
struct mii_data *mii;
|
|
|
|
sc = ifp->if_softc;
|
|
if (sc->miibus == NULL)
|
|
return (ENXIO);
|
|
|
|
mii = device_get_softc(sc->miibus);
|
|
return mii_mediachg(mii);
|
|
}
|
|
|
|
static void
|
|
ed_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr)
|
|
{
|
|
struct ed_softc *sc;
|
|
struct mii_data *mii;
|
|
|
|
sc = ifp->if_softc;
|
|
if (sc->miibus == NULL)
|
|
return;
|
|
|
|
mii = device_get_softc(sc->miibus);
|
|
mii_pollstat(mii);
|
|
ifmr->ifm_active = mii->mii_media_active;
|
|
ifmr->ifm_status = mii->mii_media_status;
|
|
}
|
|
|
|
static void
|
|
ed_child_detached(device_t dev, device_t child)
|
|
{
|
|
struct ed_softc *sc;
|
|
|
|
sc = device_get_softc(dev);
|
|
if (child == sc->miibus)
|
|
sc->miibus = NULL;
|
|
}
|
|
|
|
static device_method_t ed_pccard_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, ed_pccard_probe),
|
|
DEVMETHOD(device_attach, ed_pccard_attach),
|
|
DEVMETHOD(device_detach, ed_detach),
|
|
|
|
/* Bus interface */
|
|
DEVMETHOD(bus_child_detached, ed_child_detached),
|
|
|
|
/* MII interface */
|
|
DEVMETHOD(miibus_readreg, ed_miibus_readreg),
|
|
DEVMETHOD(miibus_writereg, ed_miibus_writereg),
|
|
|
|
{ 0, 0 }
|
|
};
|
|
|
|
static driver_t ed_pccard_driver = {
|
|
"ed",
|
|
ed_pccard_methods,
|
|
sizeof(struct ed_softc)
|
|
};
|
|
|
|
DRIVER_MODULE(ed, pccard, ed_pccard_driver, ed_devclass, 0, 0);
|
|
DRIVER_MODULE(miibus, ed, miibus_driver, miibus_devclass, 0, 0);
|
|
MODULE_DEPEND(ed, miibus, 1, 1, 1);
|
|
MODULE_DEPEND(ed, ether, 1, 1, 1);
|