57 lines
1.4 KiB
Plaintext
57 lines
1.4 KiB
Plaintext
|
|
This file is for use with FreeBSD 4.x and 5.x only.
|
|
|
|
To build a kernel for use with the loadable kernel module, follow these
|
|
steps:
|
|
1. For FreeBSD version:
|
|
4.* do make freebsd4
|
|
5.* do make freebsd5
|
|
|
|
2. do "make install-bsd"
|
|
(probably has to be done as root)
|
|
|
|
3. Run "BSD/kupgrade"
|
|
|
|
4. build a new kernel
|
|
|
|
5. install and reboot with the new kernel
|
|
|
|
6. use modload(8) to load the packet filter with:
|
|
modload if_ipl.o
|
|
|
|
7. do "modstat" to confirm that it has been loaded successfully.
|
|
|
|
There is no need to use mknod to create the device in /dev;
|
|
- upon loading the module, it will create itself with the correct values,
|
|
under the name (IPL_NAME) from the Makefile. It will also remove itself
|
|
from /dev when it is modunload'd.
|
|
|
|
To build a kernel with the IP filter, follow these steps:
|
|
|
|
1. For FreeBSD version:
|
|
4.* do make freebsd4
|
|
5.* do make freebsd5
|
|
|
|
2. do "make install-bsd"
|
|
(probably has to be done as root)
|
|
|
|
3. run "FreeBSD/kinstall" as root
|
|
|
|
4. build a new kernel
|
|
|
|
5.
|
|
b) If you are using FreeBSD-3 or later:
|
|
create devices for IP Filter as follows (assuming it was
|
|
installed into the device table as char dev 20):
|
|
mknod /dev/ipl c 79 0
|
|
mknod /dev/ipnat c 79 1
|
|
mknod /dev/ipstate c 79 2
|
|
mknod /dev/ipauth c 79 3
|
|
mknod /dev/ipsync c 79 4
|
|
mknod /dev/ipscan c 79 5
|
|
|
|
6. install and reboot with the new kernel
|
|
|
|
Darren Reed
|
|
darrenr@pobox.com
|