freebsd-skq/sys/dev/awi/am79c930reg.h
Warner Losh 0d5c223da4 Awi driver, ported from NetBSD from Atsushi Once-san.
From the README:
	Any IEEE 802.11 cards use AMD Am79C930 and Harris (Intersil) Chipset
	with PCnetMobile firmware by AMD.
	   BayStack 650   1Mbps Frequency Hopping PCCARD adapter
	   BayStack 660   2Mbps Direct Sequence PCCARD adapter
	   Icom SL-200    2Mbps Direct Sequence PCCARD adapter
	   Melco WLI-PCM  2Mbps Direct Sequence PCCARD adapter
	   NEL SSMagic    2Mbps Direct Sequence PCCARD adapter
	   Netwave AirSurfer Plus
			  1Mbps Frequency Hopping PCCARD adapter
	   Netwave AirSurfer Pro
			  2Mbps Direct Sequence PCCARD adapter

Known Problems:
	WEP is not supported.
	Does not create IBSS itself.
	Cannot configure the following on FreeBSD:
		selection of infrastructure/adhoc mode
		ESSID
		...

Submitted by: Atsushi Onoe <onoe@sm.sony.co.jp>
2000-04-06 02:48:48 +00:00

127 lines
4.9 KiB
C

/* $NetBSD: am79c930reg.h,v 1.3 2000/03/22 11:22:22 onoe Exp $ */
/* $FreeBSD$ */
/*-
* Copyright (c) 1999 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Bill Sommerfeld
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Device register definitions gleaned from from the AMD "Am79C930
* PCnet(tm)-Mobile Single Chip Wireless LAN Media Access Controller"
* data sheet, AMD Pub #20183, Rev B, amendment/0, issue date August 1997.
*
* As of 1999/10/23, this was available from AMD's web site in PDF
* form.
*/
/*
* The 79c930 contains a bus interface unit, a media access
* controller, and a tranceiver attachment interface.
* The MAC contains an 80188 CPU core.
* typical devices built around this chip typically add 32k or 64k of
* memory for buffers.
*
* The 80188 runs firmware which handles most of the 802.11 gorp, and
* communicates with the host using shared data structures in this
* memory; the specifics of the shared memory layout are not covered
* in this source file; see <dev/ic/am80211fw.h> for details of that layer.
*/
/*
* Device Registers
*/
#define AM79C930_IO_BASE 0
#define AM79C930_IO_SIZE 16
#define AM79C930_IO_SIZE_BIG 40
#define AM79C930_IO_ALIGN 0x40 /* am79c930 decodes lower 6bits */
#define AM79C930_GCR 0 /* General Config Register */
#define AM79C930_GCR_SWRESET 0x80 /* software reset */
#define AM79C930_GCR_CORESET 0x40 /* core reset */
#define AM79C930_GCR_DISPWDN 0x20 /* disable powerdown */
#define AM79C930_GCR_ECWAIT 0x10 /* embedded controller wait */
#define AM79C930_GCR_ECINT 0x08 /* interrupt from embedded ctrlr */
#define AM79C930_GCR_INT2EC 0x04 /* interrupt to embedded ctrlr */
#define AM79C930_GCR_ENECINT 0x02 /* enable interrupts from e.c. */
#define AM79C930_GCR_DAM 0x01 /* direct access mode (read only) */
#define AM79C930_GCR_BITS "\020\1DAM\2ENECINT\3INT2EC\4ECINT\5ECWAIT\6DISPWDN\7CORESET\010SWRESET"
#define AM79C930_BSS 1 /* Bank Switching Select register */
#define AM79C930_BSS_ECATR 0x80 /* E.C. ALE test read */
#define AM79C930_BSS_FS 0x20 /* Flash Select */
#define AM79C930_BSS_MBS 0x18 /* Memory Bank Select */
#define AM79C930_BSS_EIOW 0x04 /* Expand I/O Window */
#define AM79C930_BSS_TBS 0x03 /* TAI Bank Select */
#define AM79C930_LMA_LO 2 /* Local Memory Address register (low byte) */
#define AM79C930_LMA_HI 3 /* Local Memory Address register (high byte) */
/* set this bit to turn off ISAPnP version */
#define AM79C930_LMA_HI_ISAPWRDWN 0x80
/*
* mmm, inconsistancy in chip documentation:
* According to page 79--80, all four of the following are equivalent
* and address the single byte pointed at by BSS_{FS,MBS} | LMA_{HI,LO}
* According to tables on p63 and p67, they're the LSB through MSB
* of a 32-bit word.
*/
#define AM79C930_IODPA 4 /* I/O Data port A */
#define AM79C930_IODPB 5 /* I/O Data port B */
#define AM79C930_IODPC 6 /* I/O Data port C */
#define AM79C930_IODPD 7 /* I/O Data port D */
/*
* Tranceiver Attachment Interface Registers (TIR space)
* (omitted for now, since host access to them is for diagnostic
* purposes only).
*/
/*
* memory space goo.
*/
#define AM79C930_MEM_SIZE 0x8000 /* 32k */
#define AM79C930_MEM_BASE 0x0 /* starting at 0 */