d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
b56e8f172a
freebsd-skq/sys/net80211/_ieee80211.h
sam 98df412892 o add IEEE80211_RATE_MCS to use instead of naked constant (for marking MCS) 
o correct ieee80211_rate2media handling of MCS
o correct rate HT announcements for 11n devices

Approved by:	re (blanket wireless)
2007-09-18 20:46:36 +00:00

311 lines
12 KiB
C
Raw Blame History

/*-
* Copyright (c) 2001 Atsushi Onoe
* Copyright (c) 2002-2007 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _NET80211__IEEE80211_H_
#define _NET80211__IEEE80211_H_
enum ieee80211_phytype {
IEEE80211_T_DS, /* direct sequence spread spectrum */
IEEE80211_T_FH, /* frequency hopping */
IEEE80211_T_OFDM, /* frequency division multiplexing */
IEEE80211_T_TURBO, /* high rate OFDM, aka turbo mode */
IEEE80211_T_HT, /* high throughput, full GI */
};
#define IEEE80211_T_CCK IEEE80211_T_DS /* more common nomenclature */
/* XXX not really a mode; there are really multiple PHY's */
enum ieee80211_phymode {
IEEE80211_MODE_AUTO = 0, /* autoselect */
IEEE80211_MODE_11A = 1, /* 5GHz, OFDM */
IEEE80211_MODE_11B = 2, /* 2GHz, CCK */
IEEE80211_MODE_11G = 3, /* 2GHz, OFDM */
IEEE80211_MODE_FH = 4, /* 2GHz, GFSK */
IEEE80211_MODE_TURBO_A = 5, /* 5GHz, OFDM, 2x clock */
IEEE80211_MODE_TURBO_G = 6, /* 2GHz, OFDM, 2x clock */
IEEE80211_MODE_STURBO_A = 7, /* 5GHz, OFDM, 2x clock, static */
IEEE80211_MODE_11NA = 8, /* 5GHz, w/ HT */
IEEE80211_MODE_11NG = 9, /* 2GHz, w/ HT */
};
#define IEEE80211_MODE_MAX (IEEE80211_MODE_11NG+1)
enum ieee80211_opmode {
IEEE80211_M_STA = 1, /* infrastructure station */
IEEE80211_M_IBSS = 0, /* IBSS (adhoc) station */
IEEE80211_M_AHDEMO = 3, /* Old lucent compatible adhoc demo */
IEEE80211_M_HOSTAP = 6, /* Software Access Point */
IEEE80211_M_MONITOR = 8, /* Monitor mode */
IEEE80211_M_WDS = 2 /* WDS link */
};
#define IEEE80211_OPMODE_MAX (IEEE80211_M_MONITOR+1)
/*
* 802.11g/802.11n protection mode.
*/
enum ieee80211_protmode {
IEEE80211_PROT_NONE = 0, /* no protection */
IEEE80211_PROT_CTSONLY = 1, /* CTS to self */
IEEE80211_PROT_RTSCTS = 2, /* RTS-CTS */
};
/*
* Authentication mode.
*/
enum ieee80211_authmode {
IEEE80211_AUTH_NONE = 0,
IEEE80211_AUTH_OPEN = 1, /* open */
IEEE80211_AUTH_SHARED = 2, /* shared-key */
IEEE80211_AUTH_8021X = 3, /* 802.1x */
IEEE80211_AUTH_AUTO = 4, /* auto-select/accept */
/* NB: these are used only for ioctls */
IEEE80211_AUTH_WPA = 5, /* WPA/RSN w/ 802.1x/PSK */
};
/*
* Roaming mode is effectively who controls the operation
* of the 802.11 state machine when operating as a station.
* State transitions are controlled either by the driver
* (typically when management frames are processed by the
* hardware/firmware), the host (auto/normal operation of
* the 802.11 layer), or explicitly through ioctl requests
* when applications like wpa_supplicant want control.
*/
enum ieee80211_roamingmode {
IEEE80211_ROAMING_DEVICE= 0, /* driver/hardware control */
IEEE80211_ROAMING_AUTO = 1, /* 802.11 layer control */
IEEE80211_ROAMING_MANUAL= 2, /* application control */
};
/*
* Channels are specified by frequency and attributes.
*/
struct ieee80211_channel {
uint32_t ic_flags; /* see below */
uint16_t ic_freq; /* setting in Mhz */
uint8_t ic_ieee; /* IEEE channel number */
int8_t ic_maxregpower; /* maximum regulatory tx power in dBm */
int8_t ic_maxpower; /* maximum tx power in .5 dBm */
int8_t ic_minpower; /* minimum tx power in .5 dBm */
uint8_t ic_state; /* dynamic state */
uint8_t ic_extieee; /* HT40 extension channel number */
};
#define IEEE80211_CHAN_MAX 255
#define IEEE80211_CHAN_BYTES 32 /* howmany(IEEE80211_CHAN_MAX, NBBY) */
#define IEEE80211_CHAN_ANY 0xffff /* token for ``any channel'' */
#define IEEE80211_CHAN_ANYC \
((struct ieee80211_channel *) IEEE80211_CHAN_ANY)
/* bits 0-3 are for private use by drivers */
/* channel attributes */
#define IEEE80211_CHAN_TURBO 0x00000010 /* Turbo channel */
#define IEEE80211_CHAN_CCK 0x00000020 /* CCK channel */
#define IEEE80211_CHAN_OFDM 0x00000040 /* OFDM channel */
#define IEEE80211_CHAN_2GHZ 0x00000080 /* 2 GHz spectrum channel. */
#define IEEE80211_CHAN_5GHZ 0x00000100 /* 5 GHz spectrum channel */
#define IEEE80211_CHAN_PASSIVE 0x00000200 /* Only passive scan allowed */
#define IEEE80211_CHAN_DYN 0x00000400 /* Dynamic CCK-OFDM channel */
#define IEEE80211_CHAN_GFSK 0x00000800 /* GFSK channel (FHSS PHY) */
#define IEEE80211_CHAN_GSM 0x00001000 /* 900 MHz spectrum channel */
#define IEEE80211_CHAN_STURBO 0x00002000 /* 11a static turbo channel only */
#define IEEE80211_CHAN_HALF 0x00004000 /* Half rate channel */
#define IEEE80211_CHAN_QUARTER 0x00008000 /* Quarter rate channel */
#define IEEE80211_CHAN_HT20 0x00010000 /* HT 20 channel */
#define IEEE80211_CHAN_HT40U 0x00020000 /* HT 40 channel w/ ext above */
#define IEEE80211_CHAN_HT40D 0x00040000 /* HT 40 channel w/ ext below */
#define IEEE80211_CHAN_DFS 0x00080000 /* DFS required */
#define IEEE80211_CHAN_4MSXMIT 0x00100000 /* 4ms limit on frame length */
#define IEEE80211_CHAN_NOADHOC 0x00200000 /* adhoc mode not allowed */
#define IEEE80211_CHAN_NOHOSTAP 0x00400000 /* hostap mode not allowed */
#define IEEE80211_CHAN_11D 0x00800000 /* 802.11d required */
#define IEEE80211_CHAN_HT40 (IEEE80211_CHAN_HT40U | IEEE80211_CHAN_HT40D)
#define IEEE80211_CHAN_HT (IEEE80211_CHAN_HT20 | IEEE80211_CHAN_HT40)
/*
* Useful combinations of channel characteristics.
*/
#define IEEE80211_CHAN_FHSS \
(IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_GFSK)
#define IEEE80211_CHAN_A \
(IEEE80211_CHAN_5GHZ | IEEE80211_CHAN_OFDM)
#define IEEE80211_CHAN_B \
(IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_CCK)
#define IEEE80211_CHAN_PUREG \
(IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_OFDM)
#define IEEE80211_CHAN_G \
(IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_DYN)
#define IEEE80211_CHAN_108A \
(IEEE80211_CHAN_5GHZ | IEEE80211_CHAN_OFDM | IEEE80211_CHAN_TURBO)
#define IEEE80211_CHAN_108G \
(IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_OFDM | IEEE80211_CHAN_TURBO)
#define IEEE80211_CHAN_ST \
(IEEE80211_CHAN_108A | IEEE80211_CHAN_STURBO)
#define IEEE80211_CHAN_ALL \
(IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_5GHZ | IEEE80211_CHAN_GFSK | \
IEEE80211_CHAN_CCK | IEEE80211_CHAN_OFDM | IEEE80211_CHAN_DYN | \
IEEE80211_CHAN_HT)
#define IEEE80211_CHAN_ALLTURBO \
(IEEE80211_CHAN_ALL | IEEE80211_CHAN_TURBO | IEEE80211_CHAN_STURBO)
#define IEEE80211_IS_CHAN_FHSS(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_FHSS) == IEEE80211_CHAN_FHSS)
#define IEEE80211_IS_CHAN_A(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_A) == IEEE80211_CHAN_A)
#define IEEE80211_IS_CHAN_B(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_B) == IEEE80211_CHAN_B)
#define IEEE80211_IS_CHAN_PUREG(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_PUREG) == IEEE80211_CHAN_PUREG)
#define IEEE80211_IS_CHAN_G(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_G) == IEEE80211_CHAN_G)
#define IEEE80211_IS_CHAN_ANYG(_c) \
(IEEE80211_IS_CHAN_PUREG(_c) || IEEE80211_IS_CHAN_G(_c))
#define IEEE80211_IS_CHAN_ST(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_ST) == IEEE80211_CHAN_ST)
#define IEEE80211_IS_CHAN_108A(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_108A) == IEEE80211_CHAN_108A)
#define IEEE80211_IS_CHAN_108G(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_108G) == IEEE80211_CHAN_108G)
#define IEEE80211_IS_CHAN_2GHZ(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_2GHZ) != 0)
#define IEEE80211_IS_CHAN_5GHZ(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_5GHZ) != 0)
#define IEEE80211_IS_CHAN_PASSIVE(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_PASSIVE) != 0)
#define IEEE80211_IS_CHAN_OFDM(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_OFDM) != 0)
#define IEEE80211_IS_CHAN_CCK(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_CCK) != 0)
#define IEEE80211_IS_CHAN_GFSK(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_GFSK) != 0)
#define IEEE80211_IS_CHAN_TURBO(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_TURBO) != 0)
#define IEEE80211_IS_CHAN_STURBO(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_STURBO) != 0)
#define IEEE80211_IS_CHAN_DTURBO(_c) \
(((_c)->ic_flags & \
(IEEE80211_CHAN_TURBO | IEEE80211_CHAN_STURBO)) == IEEE80211_CHAN_TURBO)
#define IEEE80211_IS_CHAN_HALF(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_HALF) != 0)
#define IEEE80211_IS_CHAN_QUARTER(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_QUARTER) != 0)
#define IEEE80211_IS_CHAN_FULL(_c) \
(((_c)->ic_flags & (IEEE80211_CHAN_QUARTER | IEEE80211_CHAN_HALF)) == 0)
#define IEEE80211_IS_CHAN_GSM(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_GSM) != 0)
#define IEEE80211_IS_CHAN_HT(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_HT) != 0)
#define IEEE80211_IS_CHAN_HT20(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_HT20) != 0)
#define IEEE80211_IS_CHAN_HT40(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_HT40) != 0)
#define IEEE80211_IS_CHAN_HT40U(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_HT40U) != 0)
#define IEEE80211_IS_CHAN_HT40D(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_HT40D) != 0)
#define IEEE80211_IS_CHAN_HTA(_c) \
(IEEE80211_IS_CHAN_5GHZ(_c) && \
((_c)->ic_flags & IEEE80211_CHAN_HT) != 0)
#define IEEE80211_IS_CHAN_HTG(_c) \
(IEEE80211_IS_CHAN_2GHZ(_c) && \
((_c)->ic_flags & IEEE80211_CHAN_HT) != 0)
#define IEEE80211_IS_CHAN_DFS(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_DFS) != 0)
#define IEEE80211_IS_CHAN_NOADHOC(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_NOADHOC) != 0)
#define IEEE80211_IS_CHAN_NOHOSTAP(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_NOHOSTAP) != 0)
#define IEEE80211_IS_CHAN_11D(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_11D) != 0)
#define IEEE80211_CHAN2IEEE(_c) (_c)->ic_ieee
/* dynamic state */
#define IEEE80211_CHANSTATE_RADAR 0x01 /* radar detected */
#define IEEE80211_CHANSTATE_CACDONE 0x02 /* CAC completed */
#define IEEE80211_CHANSTATE_NORADAR 0x10 /* post notify on radar clear */
#define IEEE80211_IS_CHAN_RADAR(_c) \
(((_c)->ic_state & IEEE80211_CHANSTATE_RADAR) != 0)
#define IEEE80211_IS_CHAN_CACDONE(_c) \
(((_c)->ic_state & IEEE80211_CHANSTATE_CACDONE) != 0)
/* ni_chan encoding for FH phy */
#define IEEE80211_FH_CHANMOD 80
#define IEEE80211_FH_CHAN(set,pat) (((set)-1)*IEEE80211_FH_CHANMOD+(pat))
#define IEEE80211_FH_CHANSET(chan) ((chan)/IEEE80211_FH_CHANMOD+1)
#define IEEE80211_FH_CHANPAT(chan) ((chan)%IEEE80211_FH_CHANMOD)
#define IEEE80211_TID_SIZE (WME_NUM_TID+1) /* WME TID's +1 for non-QoS */
#define IEEE80211_NONQOS_TID WME_NUM_TID /* index for non-QoS sta */
/*
* 802.11 rate set.
*/
#define IEEE80211_RATE_SIZE 8 /* 802.11 standard */
#define IEEE80211_RATE_MAXSIZE 15 /* max rates we'll handle */
struct ieee80211_rateset {
uint8_t rs_nrates;
uint8_t rs_rates[IEEE80211_RATE_MAXSIZE];
};
/*
* 802.11n variant of ieee80211_rateset. Instead
* legacy rates the entries are MCS rates. We define
* the structure such that it can be used interchangeably
* with an ieee80211_rateset (modulo structure size).
*/
#define IEEE80211_HTRATE_MAXSIZE 127
struct ieee80211_htrateset {
uint8_t rs_nrates;
uint8_t rs_rates[IEEE80211_HTRATE_MAXSIZE];
};
#define IEEE80211_RATE_MCS 0x80
/*
* Roaming state visible to user space. There are two
* thresholds that control whether roaming is considered;
* when either is exceeded the 802.11 layer will check
* the scan cache for another AP. If the cache is stale
* then a scan may be triggered.
*/
struct ieee80211_roam {
int8_t rssi11a; /* rssi thresh for 11a bss */
int8_t rssi11b; /* for 11g sta in 11b bss */
int8_t rssi11bOnly; /* for 11b sta */
uint8_t pad1;
uint8_t rate11a; /* rate thresh for 11a bss */
uint8_t rate11b; /* for 11g sta in 11b bss */
uint8_t rate11bOnly; /* for 11b sta */
uint8_t pad2;
};
#endif /* _NET80211__IEEE80211_H_ */
Reference in New Issue View Git Blame Copy Permalink