5b7d331b4d
- Rip out all the static softc stuff and do softc allocation the right way. - Rewrite most of the ISA code so that it provides a DEVICE_IDENTIFY method to enumerate all non-PnP ISA devices. This has the following consequences: - No 'ep' devices may be hardwired. - All hardwired devices will probably be detected twice. By hardwired I mean: device ep0 at isa? port 0x300 irq 10 - 'ep' devices are ordered by bus, slot, and then MAC address. - Make 3c509B cards work in PnP mode. Yes, they really work. - Convert over to using ifmedia for media selection. No more of this lame 'linkX' stuff. - Consolidate a lot of duplicated code. - Make a stab at not breaking MII based PCCARD devices. I doubt that the PCCARD stuff works any more than it did before my changes but theres hope. My PCCARD hardware should arrive in a week or so. - Retreive the media settings from the card EEPROM rather than guessing. I've got a 3c509-TPO that thinks its got an AUI port and if others can report similar problems I'll write a bit of clever code that will fix this but right now it works correctly on all but 1 card. - Clean up a few things and make some cosmetic changes. - Add myself as the MAINTAINER since nobody else wants to. I'm in the best position to do this as I've got an example of most of the cards: EISA 3c579 bnc/aui MCA 3c529 tp/aui ISA 3c509 tpo ISA-PnP 3c509B combo If someone wants to send me a any cards I don't have I'd appriciate it. Also welcome are 3c59x boards since I'll be folding if_vx and if_ep at some point.
166 lines
4.4 KiB
C
166 lines
4.4 KiB
C
/*-
|
|
* Copyright (c) 1999 Matthew N. Dodd <winter@jurai.net>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/socket.h>
|
|
|
|
#include <sys/module.h>
|
|
#include <sys/bus.h>
|
|
|
|
#include <machine/bus.h>
|
|
#include <machine/resource.h>
|
|
#include <sys/rman.h>
|
|
|
|
#include <net/if.h>
|
|
#include <net/if_arp.h>
|
|
#include <net/if_media.h>
|
|
|
|
#include <dev/mca/mca_busreg.h>
|
|
#include <dev/mca/mca_busvar.h>
|
|
|
|
#include <dev/ep/if_epreg.h>
|
|
#include <dev/ep/if_epvar.h>
|
|
|
|
#define EP_MCA_627C 0x627C
|
|
#define EP_MCA_627D 0x627D
|
|
#define EP_MCA_62DB 0x62db
|
|
#define EP_MCA_62F6 0x62f6
|
|
#define EP_MCA_62F7 0x62f7
|
|
|
|
static struct mca_ident ep_mca_devs[] = {
|
|
{ EP_MCA_627C, "3Com 3C529 Network Adapter" },
|
|
{ EP_MCA_627D, "3Com 3C529-TP Network Adapter" },
|
|
|
|
/*
|
|
* These are from the linux 3c509 driver.
|
|
* I have not seen the ADFs for them and have
|
|
* not tested or even seen the hardware.
|
|
* Someone with the ADFs should replace the names with
|
|
* whatever is in the AdapterName field of the ADF.
|
|
* (and fix the media setup for the cards as well.)
|
|
*/
|
|
{ EP_MCA_62DB, "3Com 3c529 EtherLink III (test mode)" },
|
|
{ EP_MCA_62F6, "3Com 3c529 EtherLink III (TP or coax)" },
|
|
{ EP_MCA_62F7, "3Com 3c529 EtherLink III (TP)" },
|
|
|
|
{ 0, NULL },
|
|
};
|
|
|
|
#define EP_MCA_IOPORT_POS MCA_ADP_POS(MCA_POS2)
|
|
#define EP_MCA_IOPORT_MASK 0xfc
|
|
#define EP_MCA_IOPORT_SIZE EP_IOSIZE
|
|
#define EP_MCA_IOPORT(pos) ((((u_int32_t)pos & EP_MCA_IOPORT_MASK) \
|
|
| 0x02) << 8)
|
|
|
|
#define EP_MCA_IRQ_POS MCA_ADP_POS(MCA_POS3)
|
|
#define EP_MCA_IRQ_MASK 0x0f
|
|
#define EP_MCA_IRQ(pos) (pos & EP_MCA_IRQ_MASK)
|
|
|
|
#define EP_MCA_MEDIA_POS MCA_ADP_POS(MCA_POS2)
|
|
#define EP_MCA_MEDIA_MASK 0x03
|
|
#define EP_MCA_MEDIA(pos) (pos & EP_MCA_MEDIA_MASK)
|
|
|
|
static int
|
|
ep_mca_probe (device_t dev)
|
|
{
|
|
const char * desc;
|
|
u_int32_t iobase = 0;
|
|
u_int8_t irq = 0;
|
|
u_int8_t pos;
|
|
|
|
desc = mca_match_id(mca_get_id(dev), ep_mca_devs);
|
|
if (!desc)
|
|
return (ENXIO);
|
|
device_set_desc(dev, desc);
|
|
|
|
pos = mca_pos_read(dev, EP_MCA_IOPORT_POS);
|
|
iobase = EP_MCA_IOPORT(pos);
|
|
|
|
pos = mca_pos_read(dev, EP_MCA_IRQ_POS);
|
|
irq = EP_MCA_IRQ(pos);
|
|
|
|
mca_add_iospace(dev, iobase, EP_MCA_IOPORT_SIZE);
|
|
mca_add_irq(dev, irq);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
ep_mca_attach (device_t dev)
|
|
{
|
|
struct ep_softc * sc = device_get_softc(dev);
|
|
int error = 0;
|
|
|
|
if ((error = ep_alloc(dev))) {
|
|
device_printf(dev, "ep_alloc() failed! (%d)\n", error);
|
|
goto bad;
|
|
}
|
|
sc->stat = F_ACCESS_32_BITS;
|
|
|
|
ep_get_media(sc);
|
|
|
|
GO_WINDOW(0);
|
|
SET_IRQ(BASE, rman_get_start(sc->irq));
|
|
|
|
if ((error = ep_attach(sc))) {
|
|
device_printf(dev, "ep_attach() failed! (%d)\n", error);
|
|
goto bad;
|
|
}
|
|
|
|
if ((error = bus_setup_intr(dev, sc->irq, INTR_TYPE_NET, ep_intr,
|
|
sc, &sc->ep_intrhand))) {
|
|
device_printf(dev, "bus_setup_intr() failed! (%d)\n", error);
|
|
goto bad;
|
|
}
|
|
|
|
return (0);
|
|
bad:
|
|
ep_free(dev);
|
|
return (error);
|
|
}
|
|
|
|
static device_method_t ep_mca_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, ep_mca_probe),
|
|
DEVMETHOD(device_attach, ep_mca_attach),
|
|
|
|
{ 0, 0 }
|
|
};
|
|
|
|
static driver_t ep_mca_driver = {
|
|
"ep",
|
|
ep_mca_methods,
|
|
sizeof(struct ep_softc),
|
|
};
|
|
|
|
static devclass_t ep_devclass;
|
|
|
|
DRIVER_MODULE(ep, mca, ep_mca_driver, ep_devclass, 0, 0);
|