freebsd-skq/sys/dev/mpt/mpt_reg.h
pfg 1537078d8f sys/dev: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
2017-11-27 14:52:40 +00:00

163 lines
6.2 KiB
C

/* $FreeBSD$ */
/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD AND BSD-3-Clause
*
* Generic defines for LSI '909 FC adapters.
* FreeBSD Version.
*
* Copyright (c) 2000, 2001 by Greg Ansley
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice immediately at the beginning of the file, without modification,
* this list of conditions, and the following disclaimer.
* 2. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*-
* Copyright (c) 2002, 2006 by Matthew Jacob
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon including
* a substantially similar Disclaimer requirement for further binary
* redistribution.
* 3. Neither the names of the above listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT
* OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* Support from Chris Ellsworth in order to make SAS adapters work
* is gratefully acknowledged.
*
* Support from LSI-Logic has also gone a great deal toward making this a
* workable subsystem and is gratefully acknowledged.
*/
#ifndef _MPT_REG_H_
#define _MPT_REG_H_
#define MPT_OFFSET_DOORBELL 0x00
#define MPT_OFFSET_SEQUENCE 0x04
#define MPT_OFFSET_DIAGNOSTIC 0x08
#define MPT_OFFSET_TEST 0x0C
#define MPT_OFFSET_DIAG_DATA 0x10
#define MPT_OFFSET_DIAG_ADDR 0x14
#define MPT_OFFSET_INTR_STATUS 0x30
#define MPT_OFFSET_INTR_MASK 0x34
#define MPT_OFFSET_REQUEST_Q 0x40
#define MPT_OFFSET_REPLY_Q 0x44
#define MPT_OFFSET_HOST_INDEX 0x50
#define MPT_OFFSET_FUBAR 0x90
#define MPT_OFFSET_RESET_1078 0x10fc
/* Bit Maps for DOORBELL register */
enum DB_STATE_BITS {
MPT_DB_STATE_RESET = 0x00000000,
MPT_DB_STATE_READY = 0x10000000,
MPT_DB_STATE_RUNNING = 0x20000000,
MPT_DB_STATE_FAULT = 0x40000000,
MPT_DB_STATE_MASK = 0xf0000000
};
#define MPT_STATE(v) ((enum DB_STATE_BITS)((v) & MPT_DB_STATE_MASK))
#define MPT_DB_LENGTH_SHIFT (16)
#define MPT_DB_DATA_MASK (0xffff)
#define MPT_DB_DB_USED 0x08000000
#define MPT_DB_IS_IN_USE(v) (((v) & MPT_DB_DB_USED) != 0)
/*
* "Whom" initializor values
*/
#define MPT_DB_INIT_NOONE 0x00
#define MPT_DB_INIT_BIOS 0x01
#define MPT_DB_INIT_ROMBIOS 0x02
#define MPT_DB_INIT_PCIPEER 0x03
#define MPT_DB_INIT_HOST 0x04
#define MPT_DB_INIT_MANUFACTURE 0x05
#define MPT_WHO(v) \
((v & MPI_DOORBELL_WHO_INIT_MASK) >> MPI_DOORBELL_WHO_INIT_SHIFT)
/* Function Maps for DOORBELL register */
enum DB_FUNCTION_BITS {
MPT_FUNC_IOC_RESET = 0x40000000,
MPT_FUNC_UNIT_RESET = 0x41000000,
MPT_FUNC_HANDSHAKE = 0x42000000,
MPT_FUNC_REPLY_REMOVE = 0x43000000,
MPT_FUNC_MASK = 0xff000000
};
/* Function Maps for INTERRUPT request register */
enum _MPT_INTR_REQ_BITS {
MPT_INTR_DB_BUSY = 0x80000000,
MPT_INTR_REPLY_READY = 0x00000008,
MPT_INTR_DB_READY = 0x00000001
};
#define MPT_DB_IS_BUSY(v) (((v) & MPT_INTR_DB_BUSY) != 0)
#define MPT_DB_INTR(v) (((v) & MPT_INTR_DB_READY) != 0)
#define MPT_REPLY_INTR(v) (((v) & MPT_INTR_REPLY_READY) != 0)
/* Function Maps for INTERRUPT mask register */
enum _MPT_INTR_MASK_BITS {
MPT_INTR_REPLY_MASK = 0x00000008,
MPT_INTR_DB_MASK = 0x00000001
};
/* Magic addresses in diagnostic memory space */
#define MPT_DIAG_IOP_BASE (0x00000000)
#define MPT_DIAG_IOP_SIZE (0x00002000)
#define MPT_DIAG_GPIO (0x00030010)
#define MPT_DIAG_IOPQ_REG_BASE0 (0x00050004)
#define MPT_DIAG_IOPQ_REG_BASE1 (0x00051004)
#define MPT_DIAG_CTX0_BASE (0x000E0000)
#define MPT_DIAG_CTX0_SIZE (0x00002000)
#define MPT_DIAG_CTX1_BASE (0x001E0000)
#define MPT_DIAG_CTX1_SIZE (0x00002000)
#define MPT_DIAG_FLASH_BASE (0x00800000)
#define MPT_DIAG_RAM_BASE (0x01000000)
#define MPT_DIAG_RAM_SIZE (0x00400000)
#define MPT_DIAG_MEM_CFG_BASE (0x3F000000)
#define MPT_DIAG_MEM_CFG_BADFL (0x04000000)
/* GPIO bit assignments */
#define MPT_DIAG_GPIO_SCL (0x00010000)
#define MPT_DIAG_GPIO_SDA_OUT (0x00008000)
#define MPT_DIAG_GPIO_SDA_IN (0x00004000)
#define MPT_REPLY_EMPTY (0xFFFFFFFF) /* Reply Queue Empty Symbol */
#endif /* _MPT_REG_H_ */