53d87406a6
Update wpa 2.8 --> 2.9 hostapd: * SAE changes - disable use of groups using Brainpool curves - improved protection against side channel attacks [https://w1.fi/security/2019-6/] * EAP-pwd changes - disable use of groups using Brainpool curves - improved protection against side channel attacks [https://w1.fi/security/2019-6/] * fixed FT-EAP initial mobility domain association using PMKSA caching * added configuration of airtime policy * fixed FILS to and RSNE into (Re)Association Response frames * fixed DPP bootstrapping URI parser of channel list * added support for regulatory WMM limitation (for ETSI) * added support for MACsec Key Agreement using IEEE 802.1X/PSK * added experimental support for EAP-TEAP server (RFC 7170) * added experimental support for EAP-TLS server with TLS v1.3 * added support for two server certificates/keys (RSA/ECC) * added AKMSuiteSelector into "STA <addr>" control interface data to determine with AKM was used for an association * added eap_sim_id parameter to allow EAP-SIM/AKA server pseudonym and fast reauthentication use to be disabled * fixed an ECDH operation corner case with OpenSSL wpa_supplicant: * SAE changes - disable use of groups using Brainpool curves - improved protection against side channel attacks [https://w1.fi/security/2019-6/] * EAP-pwd changes - disable use of groups using Brainpool curves - allow the set of groups to be configured (eap_pwd_groups) - improved protection against side channel attacks [https://w1.fi/security/2019-6/] * fixed FT-EAP initial mobility domain association using PMKSA caching (disabled by default for backwards compatibility; can be enabled with ft_eap_pmksa_caching=1) * fixed a regression in OpenSSL 1.1+ engine loading * added validation of RSNE in (Re)Association Response frames * fixed DPP bootstrapping URI parser of channel list * extended EAP-SIM/AKA fast re-authentication to allow use with FILS * extended ca_cert_blob to support PEM format * improved robustness of P2P Action frame scheduling * added support for EAP-SIM/AKA using anonymous@realm identity * fixed Hotspot 2.0 credential selection based on roaming consortium to ignore credentials without a specific EAP method * added experimental support for EAP-TEAP peer (RFC 7170) * added experimental support for EAP-TLS peer with TLS v1.3 * fixed a regression in WMM parameter configuration for a TDLS peer * fixed a regression in operation with drivers that offload 802.1X 4-way handshake * fixed an ECDH operation corner case with OpenSSL MFC after: 1 week Security: https://w1.fi/security/2019-6/\ sae-eap-pwd-side-channel-attack-update.txt
2587 lines
74 KiB
C
2587 lines
74 KiB
C
/*
|
|
* wpa_supplicant - SME
|
|
* Copyright (c) 2009-2014, Jouni Malinen <j@w1.fi>
|
|
*
|
|
* This software may be distributed under the terms of the BSD license.
|
|
* See README for more details.
|
|
*/
|
|
|
|
#include "includes.h"
|
|
|
|
#include "common.h"
|
|
#include "utils/eloop.h"
|
|
#include "common/ieee802_11_defs.h"
|
|
#include "common/ieee802_11_common.h"
|
|
#include "common/ocv.h"
|
|
#include "eapol_supp/eapol_supp_sm.h"
|
|
#include "common/wpa_common.h"
|
|
#include "common/sae.h"
|
|
#include "common/dpp.h"
|
|
#include "rsn_supp/wpa.h"
|
|
#include "rsn_supp/pmksa_cache.h"
|
|
#include "config.h"
|
|
#include "wpa_supplicant_i.h"
|
|
#include "driver_i.h"
|
|
#include "wpas_glue.h"
|
|
#include "wps_supplicant.h"
|
|
#include "p2p_supplicant.h"
|
|
#include "notify.h"
|
|
#include "bss.h"
|
|
#include "scan.h"
|
|
#include "sme.h"
|
|
#include "hs20_supplicant.h"
|
|
|
|
#define SME_AUTH_TIMEOUT 5
|
|
#define SME_ASSOC_TIMEOUT 5
|
|
|
|
static void sme_auth_timer(void *eloop_ctx, void *timeout_ctx);
|
|
static void sme_assoc_timer(void *eloop_ctx, void *timeout_ctx);
|
|
static void sme_obss_scan_timeout(void *eloop_ctx, void *timeout_ctx);
|
|
#ifdef CONFIG_IEEE80211W
|
|
static void sme_stop_sa_query(struct wpa_supplicant *wpa_s);
|
|
#endif /* CONFIG_IEEE80211W */
|
|
|
|
|
|
#ifdef CONFIG_SAE
|
|
|
|
static int index_within_array(const int *array, int idx)
|
|
{
|
|
int i;
|
|
for (i = 0; i < idx; i++) {
|
|
if (array[i] <= 0)
|
|
return 0;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
|
|
static int sme_set_sae_group(struct wpa_supplicant *wpa_s)
|
|
{
|
|
int *groups = wpa_s->conf->sae_groups;
|
|
int default_groups[] = { 19, 20, 21, 0 };
|
|
|
|
if (!groups || groups[0] <= 0)
|
|
groups = default_groups;
|
|
|
|
/* Configuration may have changed, so validate current index */
|
|
if (!index_within_array(groups, wpa_s->sme.sae_group_index))
|
|
return -1;
|
|
|
|
for (;;) {
|
|
int group = groups[wpa_s->sme.sae_group_index];
|
|
if (group <= 0)
|
|
break;
|
|
if (sae_set_group(&wpa_s->sme.sae, group) == 0) {
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Selected SAE group %d",
|
|
wpa_s->sme.sae.group);
|
|
return 0;
|
|
}
|
|
wpa_s->sme.sae_group_index++;
|
|
}
|
|
|
|
return -1;
|
|
}
|
|
|
|
|
|
static struct wpabuf * sme_auth_build_sae_commit(struct wpa_supplicant *wpa_s,
|
|
struct wpa_ssid *ssid,
|
|
const u8 *bssid, int external,
|
|
int reuse)
|
|
{
|
|
struct wpabuf *buf;
|
|
size_t len;
|
|
const char *password;
|
|
|
|
#ifdef CONFIG_TESTING_OPTIONS
|
|
if (wpa_s->sae_commit_override) {
|
|
wpa_printf(MSG_DEBUG, "SAE: TESTING - commit override");
|
|
buf = wpabuf_alloc(4 + wpabuf_len(wpa_s->sae_commit_override));
|
|
if (!buf)
|
|
return NULL;
|
|
if (!external) {
|
|
wpabuf_put_le16(buf, 1); /* Transaction seq# */
|
|
wpabuf_put_le16(buf, WLAN_STATUS_SUCCESS);
|
|
}
|
|
wpabuf_put_buf(buf, wpa_s->sae_commit_override);
|
|
return buf;
|
|
}
|
|
#endif /* CONFIG_TESTING_OPTIONS */
|
|
|
|
password = ssid->sae_password;
|
|
if (!password)
|
|
password = ssid->passphrase;
|
|
if (!password) {
|
|
wpa_printf(MSG_DEBUG, "SAE: No password available");
|
|
return NULL;
|
|
}
|
|
|
|
if (reuse && wpa_s->sme.sae.tmp &&
|
|
os_memcmp(bssid, wpa_s->sme.sae.tmp->bssid, ETH_ALEN) == 0) {
|
|
wpa_printf(MSG_DEBUG,
|
|
"SAE: Reuse previously generated PWE on a retry with the same AP");
|
|
goto reuse_data;
|
|
}
|
|
if (sme_set_sae_group(wpa_s) < 0) {
|
|
wpa_printf(MSG_DEBUG, "SAE: Failed to select group");
|
|
return NULL;
|
|
}
|
|
|
|
if (sae_prepare_commit(wpa_s->own_addr, bssid,
|
|
(u8 *) password, os_strlen(password),
|
|
ssid->sae_password_id,
|
|
&wpa_s->sme.sae) < 0) {
|
|
wpa_printf(MSG_DEBUG, "SAE: Could not pick PWE");
|
|
return NULL;
|
|
}
|
|
if (wpa_s->sme.sae.tmp)
|
|
os_memcpy(wpa_s->sme.sae.tmp->bssid, bssid, ETH_ALEN);
|
|
|
|
reuse_data:
|
|
len = wpa_s->sme.sae_token ? wpabuf_len(wpa_s->sme.sae_token) : 0;
|
|
if (ssid->sae_password_id)
|
|
len += 4 + os_strlen(ssid->sae_password_id);
|
|
buf = wpabuf_alloc(4 + SAE_COMMIT_MAX_LEN + len);
|
|
if (buf == NULL)
|
|
return NULL;
|
|
if (!external) {
|
|
wpabuf_put_le16(buf, 1); /* Transaction seq# */
|
|
wpabuf_put_le16(buf, WLAN_STATUS_SUCCESS);
|
|
}
|
|
sae_write_commit(&wpa_s->sme.sae, buf, wpa_s->sme.sae_token,
|
|
ssid->sae_password_id);
|
|
|
|
return buf;
|
|
}
|
|
|
|
|
|
static struct wpabuf * sme_auth_build_sae_confirm(struct wpa_supplicant *wpa_s,
|
|
int external)
|
|
{
|
|
struct wpabuf *buf;
|
|
|
|
buf = wpabuf_alloc(4 + SAE_CONFIRM_MAX_LEN);
|
|
if (buf == NULL)
|
|
return NULL;
|
|
|
|
if (!external) {
|
|
wpabuf_put_le16(buf, 2); /* Transaction seq# */
|
|
wpabuf_put_le16(buf, WLAN_STATUS_SUCCESS);
|
|
}
|
|
sae_write_confirm(&wpa_s->sme.sae, buf);
|
|
|
|
return buf;
|
|
}
|
|
|
|
#endif /* CONFIG_SAE */
|
|
|
|
|
|
/**
|
|
* sme_auth_handle_rrm - Handle RRM aspects of current authentication attempt
|
|
* @wpa_s: Pointer to wpa_supplicant data
|
|
* @bss: Pointer to the bss which is the target of authentication attempt
|
|
*/
|
|
static void sme_auth_handle_rrm(struct wpa_supplicant *wpa_s,
|
|
struct wpa_bss *bss)
|
|
{
|
|
const u8 rrm_ie_len = 5;
|
|
u8 *pos;
|
|
const u8 *rrm_ie;
|
|
|
|
wpa_s->rrm.rrm_used = 0;
|
|
|
|
wpa_printf(MSG_DEBUG,
|
|
"RRM: Determining whether RRM can be used - device support: 0x%x",
|
|
wpa_s->drv_rrm_flags);
|
|
|
|
rrm_ie = wpa_bss_get_ie(bss, WLAN_EID_RRM_ENABLED_CAPABILITIES);
|
|
if (!rrm_ie || !(bss->caps & IEEE80211_CAP_RRM)) {
|
|
wpa_printf(MSG_DEBUG, "RRM: No RRM in network");
|
|
return;
|
|
}
|
|
|
|
if (!((wpa_s->drv_rrm_flags &
|
|
WPA_DRIVER_FLAGS_DS_PARAM_SET_IE_IN_PROBES) &&
|
|
(wpa_s->drv_rrm_flags & WPA_DRIVER_FLAGS_QUIET)) &&
|
|
!(wpa_s->drv_rrm_flags & WPA_DRIVER_FLAGS_SUPPORT_RRM)) {
|
|
wpa_printf(MSG_DEBUG,
|
|
"RRM: Insufficient RRM support in driver - do not use RRM");
|
|
return;
|
|
}
|
|
|
|
if (sizeof(wpa_s->sme.assoc_req_ie) <
|
|
wpa_s->sme.assoc_req_ie_len + rrm_ie_len + 2) {
|
|
wpa_printf(MSG_INFO,
|
|
"RRM: Unable to use RRM, no room for RRM IE");
|
|
return;
|
|
}
|
|
|
|
wpa_printf(MSG_DEBUG, "RRM: Adding RRM IE to Association Request");
|
|
pos = wpa_s->sme.assoc_req_ie + wpa_s->sme.assoc_req_ie_len;
|
|
os_memset(pos, 0, 2 + rrm_ie_len);
|
|
*pos++ = WLAN_EID_RRM_ENABLED_CAPABILITIES;
|
|
*pos++ = rrm_ie_len;
|
|
|
|
/* Set supported capabilites flags */
|
|
if (wpa_s->drv_rrm_flags & WPA_DRIVER_FLAGS_TX_POWER_INSERTION)
|
|
*pos |= WLAN_RRM_CAPS_LINK_MEASUREMENT;
|
|
|
|
*pos |= WLAN_RRM_CAPS_BEACON_REPORT_PASSIVE |
|
|
WLAN_RRM_CAPS_BEACON_REPORT_ACTIVE |
|
|
WLAN_RRM_CAPS_BEACON_REPORT_TABLE;
|
|
|
|
if (wpa_s->lci)
|
|
pos[1] |= WLAN_RRM_CAPS_LCI_MEASUREMENT;
|
|
|
|
wpa_s->sme.assoc_req_ie_len += rrm_ie_len + 2;
|
|
wpa_s->rrm.rrm_used = 1;
|
|
}
|
|
|
|
|
|
static void sme_send_authentication(struct wpa_supplicant *wpa_s,
|
|
struct wpa_bss *bss, struct wpa_ssid *ssid,
|
|
int start)
|
|
{
|
|
struct wpa_driver_auth_params params;
|
|
struct wpa_ssid *old_ssid;
|
|
#ifdef CONFIG_IEEE80211R
|
|
const u8 *ie;
|
|
#endif /* CONFIG_IEEE80211R */
|
|
#if defined(CONFIG_IEEE80211R) || defined(CONFIG_FILS)
|
|
const u8 *md = NULL;
|
|
#endif /* CONFIG_IEEE80211R || CONFIG_FILS */
|
|
int i, bssid_changed;
|
|
struct wpabuf *resp = NULL;
|
|
u8 ext_capab[18];
|
|
int ext_capab_len;
|
|
int skip_auth;
|
|
u8 *wpa_ie;
|
|
size_t wpa_ie_len;
|
|
#ifdef CONFIG_MBO
|
|
const u8 *mbo_ie;
|
|
#endif /* CONFIG_MBO */
|
|
|
|
if (bss == NULL) {
|
|
wpa_msg(wpa_s, MSG_ERROR, "SME: No scan result available for "
|
|
"the network");
|
|
wpas_connect_work_done(wpa_s);
|
|
return;
|
|
}
|
|
|
|
skip_auth = wpa_s->conf->reassoc_same_bss_optim &&
|
|
wpa_s->reassoc_same_bss;
|
|
wpa_s->current_bss = bss;
|
|
|
|
os_memset(¶ms, 0, sizeof(params));
|
|
wpa_s->reassociate = 0;
|
|
|
|
params.freq = bss->freq;
|
|
params.bssid = bss->bssid;
|
|
params.ssid = bss->ssid;
|
|
params.ssid_len = bss->ssid_len;
|
|
params.p2p = ssid->p2p_group;
|
|
|
|
if (wpa_s->sme.ssid_len != params.ssid_len ||
|
|
os_memcmp(wpa_s->sme.ssid, params.ssid, params.ssid_len) != 0)
|
|
wpa_s->sme.prev_bssid_set = 0;
|
|
|
|
wpa_s->sme.freq = params.freq;
|
|
os_memcpy(wpa_s->sme.ssid, params.ssid, params.ssid_len);
|
|
wpa_s->sme.ssid_len = params.ssid_len;
|
|
|
|
params.auth_alg = WPA_AUTH_ALG_OPEN;
|
|
#ifdef IEEE8021X_EAPOL
|
|
if (ssid->key_mgmt & WPA_KEY_MGMT_IEEE8021X_NO_WPA) {
|
|
if (ssid->leap) {
|
|
if (ssid->non_leap == 0)
|
|
params.auth_alg = WPA_AUTH_ALG_LEAP;
|
|
else
|
|
params.auth_alg |= WPA_AUTH_ALG_LEAP;
|
|
}
|
|
}
|
|
#endif /* IEEE8021X_EAPOL */
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "Automatic auth_alg selection: 0x%x",
|
|
params.auth_alg);
|
|
if (ssid->auth_alg) {
|
|
params.auth_alg = ssid->auth_alg;
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "Overriding auth_alg selection: "
|
|
"0x%x", params.auth_alg);
|
|
}
|
|
#ifdef CONFIG_SAE
|
|
wpa_s->sme.sae_pmksa_caching = 0;
|
|
if (wpa_key_mgmt_sae(ssid->key_mgmt)) {
|
|
const u8 *rsn;
|
|
struct wpa_ie_data ied;
|
|
|
|
rsn = wpa_bss_get_ie(bss, WLAN_EID_RSN);
|
|
if (!rsn) {
|
|
wpa_dbg(wpa_s, MSG_DEBUG,
|
|
"SAE enabled, but target BSS does not advertise RSN");
|
|
#ifdef CONFIG_DPP
|
|
} else if (wpa_parse_wpa_ie(rsn, 2 + rsn[1], &ied) == 0 &&
|
|
(ssid->key_mgmt & WPA_KEY_MGMT_DPP) &&
|
|
(ied.key_mgmt & WPA_KEY_MGMT_DPP)) {
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "Prefer DPP over SAE when both are enabled");
|
|
#endif /* CONFIG_DPP */
|
|
} else if (wpa_parse_wpa_ie(rsn, 2 + rsn[1], &ied) == 0 &&
|
|
wpa_key_mgmt_sae(ied.key_mgmt)) {
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "Using SAE auth_alg");
|
|
params.auth_alg = WPA_AUTH_ALG_SAE;
|
|
} else {
|
|
wpa_dbg(wpa_s, MSG_DEBUG,
|
|
"SAE enabled, but target BSS does not advertise SAE AKM for RSN");
|
|
}
|
|
}
|
|
#endif /* CONFIG_SAE */
|
|
|
|
for (i = 0; i < NUM_WEP_KEYS; i++) {
|
|
if (ssid->wep_key_len[i])
|
|
params.wep_key[i] = ssid->wep_key[i];
|
|
params.wep_key_len[i] = ssid->wep_key_len[i];
|
|
}
|
|
params.wep_tx_keyidx = ssid->wep_tx_keyidx;
|
|
|
|
bssid_changed = !is_zero_ether_addr(wpa_s->bssid);
|
|
os_memset(wpa_s->bssid, 0, ETH_ALEN);
|
|
os_memcpy(wpa_s->pending_bssid, bss->bssid, ETH_ALEN);
|
|
if (bssid_changed)
|
|
wpas_notify_bssid_changed(wpa_s);
|
|
|
|
if ((wpa_bss_get_vendor_ie(bss, WPA_IE_VENDOR_TYPE) ||
|
|
wpa_bss_get_ie(bss, WLAN_EID_RSN)) &&
|
|
wpa_key_mgmt_wpa(ssid->key_mgmt)) {
|
|
int try_opportunistic;
|
|
const u8 *cache_id = NULL;
|
|
|
|
try_opportunistic = (ssid->proactive_key_caching < 0 ?
|
|
wpa_s->conf->okc :
|
|
ssid->proactive_key_caching) &&
|
|
(ssid->proto & WPA_PROTO_RSN);
|
|
#ifdef CONFIG_FILS
|
|
if (wpa_key_mgmt_fils(ssid->key_mgmt))
|
|
cache_id = wpa_bss_get_fils_cache_id(bss);
|
|
#endif /* CONFIG_FILS */
|
|
if (pmksa_cache_set_current(wpa_s->wpa, NULL, bss->bssid,
|
|
wpa_s->current_ssid,
|
|
try_opportunistic, cache_id,
|
|
0) == 0)
|
|
eapol_sm_notify_pmkid_attempt(wpa_s->eapol);
|
|
wpa_s->sme.assoc_req_ie_len = sizeof(wpa_s->sme.assoc_req_ie);
|
|
if (wpa_supplicant_set_suites(wpa_s, bss, ssid,
|
|
wpa_s->sme.assoc_req_ie,
|
|
&wpa_s->sme.assoc_req_ie_len)) {
|
|
wpa_msg(wpa_s, MSG_WARNING, "SME: Failed to set WPA "
|
|
"key management and encryption suites");
|
|
wpas_connect_work_done(wpa_s);
|
|
return;
|
|
}
|
|
#ifdef CONFIG_HS20
|
|
} else if (wpa_bss_get_vendor_ie(bss, OSEN_IE_VENDOR_TYPE) &&
|
|
(ssid->key_mgmt & WPA_KEY_MGMT_OSEN)) {
|
|
/* No PMKSA caching, but otherwise similar to RSN/WPA */
|
|
wpa_s->sme.assoc_req_ie_len = sizeof(wpa_s->sme.assoc_req_ie);
|
|
if (wpa_supplicant_set_suites(wpa_s, bss, ssid,
|
|
wpa_s->sme.assoc_req_ie,
|
|
&wpa_s->sme.assoc_req_ie_len)) {
|
|
wpa_msg(wpa_s, MSG_WARNING, "SME: Failed to set WPA "
|
|
"key management and encryption suites");
|
|
wpas_connect_work_done(wpa_s);
|
|
return;
|
|
}
|
|
#endif /* CONFIG_HS20 */
|
|
} else if ((ssid->key_mgmt & WPA_KEY_MGMT_IEEE8021X_NO_WPA) &&
|
|
wpa_key_mgmt_wpa_ieee8021x(ssid->key_mgmt)) {
|
|
/*
|
|
* Both WPA and non-WPA IEEE 802.1X enabled in configuration -
|
|
* use non-WPA since the scan results did not indicate that the
|
|
* AP is using WPA or WPA2.
|
|
*/
|
|
wpa_supplicant_set_non_wpa_policy(wpa_s, ssid);
|
|
wpa_s->sme.assoc_req_ie_len = 0;
|
|
} else if (wpa_key_mgmt_wpa_any(ssid->key_mgmt)) {
|
|
wpa_s->sme.assoc_req_ie_len = sizeof(wpa_s->sme.assoc_req_ie);
|
|
if (wpa_supplicant_set_suites(wpa_s, NULL, ssid,
|
|
wpa_s->sme.assoc_req_ie,
|
|
&wpa_s->sme.assoc_req_ie_len)) {
|
|
wpa_msg(wpa_s, MSG_WARNING, "SME: Failed to set WPA "
|
|
"key management and encryption suites (no "
|
|
"scan results)");
|
|
wpas_connect_work_done(wpa_s);
|
|
return;
|
|
}
|
|
#ifdef CONFIG_WPS
|
|
} else if (ssid->key_mgmt & WPA_KEY_MGMT_WPS) {
|
|
struct wpabuf *wps_ie;
|
|
wps_ie = wps_build_assoc_req_ie(wpas_wps_get_req_type(ssid));
|
|
if (wps_ie && wpabuf_len(wps_ie) <=
|
|
sizeof(wpa_s->sme.assoc_req_ie)) {
|
|
wpa_s->sme.assoc_req_ie_len = wpabuf_len(wps_ie);
|
|
os_memcpy(wpa_s->sme.assoc_req_ie, wpabuf_head(wps_ie),
|
|
wpa_s->sme.assoc_req_ie_len);
|
|
} else
|
|
wpa_s->sme.assoc_req_ie_len = 0;
|
|
wpabuf_free(wps_ie);
|
|
wpa_supplicant_set_non_wpa_policy(wpa_s, ssid);
|
|
#endif /* CONFIG_WPS */
|
|
} else {
|
|
wpa_supplicant_set_non_wpa_policy(wpa_s, ssid);
|
|
wpa_s->sme.assoc_req_ie_len = 0;
|
|
}
|
|
|
|
/* In case the WPA vendor IE is used, it should be placed after all the
|
|
* non-vendor IEs, as the lower layer expects the IEs to be ordered as
|
|
* defined in the standard. Store the WPA IE so it can later be
|
|
* inserted at the correct location.
|
|
*/
|
|
wpa_ie = NULL;
|
|
wpa_ie_len = 0;
|
|
if (wpa_s->wpa_proto == WPA_PROTO_WPA) {
|
|
wpa_ie = os_memdup(wpa_s->sme.assoc_req_ie,
|
|
wpa_s->sme.assoc_req_ie_len);
|
|
if (wpa_ie) {
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "WPA: Storing WPA IE");
|
|
|
|
wpa_ie_len = wpa_s->sme.assoc_req_ie_len;
|
|
wpa_s->sme.assoc_req_ie_len = 0;
|
|
} else {
|
|
wpa_msg(wpa_s, MSG_WARNING, "WPA: Failed copy WPA IE");
|
|
wpas_connect_work_done(wpa_s);
|
|
return;
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_IEEE80211R
|
|
ie = wpa_bss_get_ie(bss, WLAN_EID_MOBILITY_DOMAIN);
|
|
if (ie && ie[1] >= MOBILITY_DOMAIN_ID_LEN)
|
|
md = ie + 2;
|
|
wpa_sm_set_ft_params(wpa_s->wpa, ie, ie ? 2 + ie[1] : 0);
|
|
if (md && (!wpa_key_mgmt_ft(ssid->key_mgmt) ||
|
|
!wpa_key_mgmt_ft(wpa_s->key_mgmt)))
|
|
md = NULL;
|
|
if (md) {
|
|
/* Prepare for the next transition */
|
|
wpa_ft_prepare_auth_request(wpa_s->wpa, ie);
|
|
}
|
|
|
|
if (md) {
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "SME: FT mobility domain %02x%02x",
|
|
md[0], md[1]);
|
|
|
|
if (wpa_s->sme.assoc_req_ie_len + 5 <
|
|
sizeof(wpa_s->sme.assoc_req_ie)) {
|
|
struct rsn_mdie *mdie;
|
|
u8 *pos = wpa_s->sme.assoc_req_ie +
|
|
wpa_s->sme.assoc_req_ie_len;
|
|
*pos++ = WLAN_EID_MOBILITY_DOMAIN;
|
|
*pos++ = sizeof(*mdie);
|
|
mdie = (struct rsn_mdie *) pos;
|
|
os_memcpy(mdie->mobility_domain, md,
|
|
MOBILITY_DOMAIN_ID_LEN);
|
|
mdie->ft_capab = md[MOBILITY_DOMAIN_ID_LEN];
|
|
wpa_s->sme.assoc_req_ie_len += 5;
|
|
}
|
|
|
|
if (wpa_s->sme.prev_bssid_set && wpa_s->sme.ft_used &&
|
|
os_memcmp(md, wpa_s->sme.mobility_domain, 2) == 0 &&
|
|
wpa_sm_has_ptk(wpa_s->wpa)) {
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Trying to use FT "
|
|
"over-the-air");
|
|
params.auth_alg = WPA_AUTH_ALG_FT;
|
|
params.ie = wpa_s->sme.ft_ies;
|
|
params.ie_len = wpa_s->sme.ft_ies_len;
|
|
}
|
|
}
|
|
#endif /* CONFIG_IEEE80211R */
|
|
|
|
#ifdef CONFIG_IEEE80211W
|
|
wpa_s->sme.mfp = wpas_get_ssid_pmf(wpa_s, ssid);
|
|
if (wpa_s->sme.mfp != NO_MGMT_FRAME_PROTECTION) {
|
|
const u8 *rsn = wpa_bss_get_ie(bss, WLAN_EID_RSN);
|
|
struct wpa_ie_data _ie;
|
|
if (rsn && wpa_parse_wpa_ie(rsn, 2 + rsn[1], &_ie) == 0 &&
|
|
_ie.capabilities &
|
|
(WPA_CAPABILITY_MFPC | WPA_CAPABILITY_MFPR)) {
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Selected AP supports "
|
|
"MFP: require MFP");
|
|
wpa_s->sme.mfp = MGMT_FRAME_PROTECTION_REQUIRED;
|
|
}
|
|
}
|
|
#endif /* CONFIG_IEEE80211W */
|
|
|
|
#ifdef CONFIG_P2P
|
|
if (wpa_s->global->p2p) {
|
|
u8 *pos;
|
|
size_t len;
|
|
int res;
|
|
pos = wpa_s->sme.assoc_req_ie + wpa_s->sme.assoc_req_ie_len;
|
|
len = sizeof(wpa_s->sme.assoc_req_ie) -
|
|
wpa_s->sme.assoc_req_ie_len;
|
|
res = wpas_p2p_assoc_req_ie(wpa_s, bss, pos, len,
|
|
ssid->p2p_group);
|
|
if (res >= 0)
|
|
wpa_s->sme.assoc_req_ie_len += res;
|
|
}
|
|
#endif /* CONFIG_P2P */
|
|
|
|
#ifdef CONFIG_FST
|
|
if (wpa_s->fst_ies) {
|
|
int fst_ies_len = wpabuf_len(wpa_s->fst_ies);
|
|
|
|
if (wpa_s->sme.assoc_req_ie_len + fst_ies_len <=
|
|
sizeof(wpa_s->sme.assoc_req_ie)) {
|
|
os_memcpy(wpa_s->sme.assoc_req_ie +
|
|
wpa_s->sme.assoc_req_ie_len,
|
|
wpabuf_head(wpa_s->fst_ies),
|
|
fst_ies_len);
|
|
wpa_s->sme.assoc_req_ie_len += fst_ies_len;
|
|
}
|
|
}
|
|
#endif /* CONFIG_FST */
|
|
|
|
sme_auth_handle_rrm(wpa_s, bss);
|
|
|
|
wpa_s->sme.assoc_req_ie_len += wpas_supp_op_class_ie(
|
|
wpa_s, ssid, bss->freq,
|
|
wpa_s->sme.assoc_req_ie + wpa_s->sme.assoc_req_ie_len,
|
|
sizeof(wpa_s->sme.assoc_req_ie) - wpa_s->sme.assoc_req_ie_len);
|
|
|
|
if (params.p2p)
|
|
wpa_drv_get_ext_capa(wpa_s, WPA_IF_P2P_CLIENT);
|
|
else
|
|
wpa_drv_get_ext_capa(wpa_s, WPA_IF_STATION);
|
|
|
|
ext_capab_len = wpas_build_ext_capab(wpa_s, ext_capab,
|
|
sizeof(ext_capab));
|
|
if (ext_capab_len > 0) {
|
|
u8 *pos = wpa_s->sme.assoc_req_ie;
|
|
if (wpa_s->sme.assoc_req_ie_len > 0 && pos[0] == WLAN_EID_RSN)
|
|
pos += 2 + pos[1];
|
|
os_memmove(pos + ext_capab_len, pos,
|
|
wpa_s->sme.assoc_req_ie_len -
|
|
(pos - wpa_s->sme.assoc_req_ie));
|
|
wpa_s->sme.assoc_req_ie_len += ext_capab_len;
|
|
os_memcpy(pos, ext_capab, ext_capab_len);
|
|
}
|
|
|
|
#ifdef CONFIG_HS20
|
|
if (is_hs20_network(wpa_s, ssid, bss)) {
|
|
struct wpabuf *hs20;
|
|
|
|
hs20 = wpabuf_alloc(20 + MAX_ROAMING_CONS_OI_LEN);
|
|
if (hs20) {
|
|
int pps_mo_id = hs20_get_pps_mo_id(wpa_s, ssid);
|
|
size_t len;
|
|
|
|
wpas_hs20_add_indication(hs20, pps_mo_id,
|
|
get_hs20_version(bss));
|
|
wpas_hs20_add_roam_cons_sel(hs20, ssid);
|
|
len = sizeof(wpa_s->sme.assoc_req_ie) -
|
|
wpa_s->sme.assoc_req_ie_len;
|
|
if (wpabuf_len(hs20) <= len) {
|
|
os_memcpy(wpa_s->sme.assoc_req_ie +
|
|
wpa_s->sme.assoc_req_ie_len,
|
|
wpabuf_head(hs20), wpabuf_len(hs20));
|
|
wpa_s->sme.assoc_req_ie_len += wpabuf_len(hs20);
|
|
}
|
|
wpabuf_free(hs20);
|
|
}
|
|
}
|
|
#endif /* CONFIG_HS20 */
|
|
|
|
if (wpa_ie) {
|
|
size_t len;
|
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "WPA: Reinsert WPA IE");
|
|
|
|
len = sizeof(wpa_s->sme.assoc_req_ie) -
|
|
wpa_s->sme.assoc_req_ie_len;
|
|
|
|
if (len > wpa_ie_len) {
|
|
os_memcpy(wpa_s->sme.assoc_req_ie +
|
|
wpa_s->sme.assoc_req_ie_len,
|
|
wpa_ie, wpa_ie_len);
|
|
wpa_s->sme.assoc_req_ie_len += wpa_ie_len;
|
|
} else {
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "WPA: Failed to add WPA IE");
|
|
}
|
|
|
|
os_free(wpa_ie);
|
|
}
|
|
|
|
if (wpa_s->vendor_elem[VENDOR_ELEM_ASSOC_REQ]) {
|
|
struct wpabuf *buf = wpa_s->vendor_elem[VENDOR_ELEM_ASSOC_REQ];
|
|
size_t len;
|
|
|
|
len = sizeof(wpa_s->sme.assoc_req_ie) -
|
|
wpa_s->sme.assoc_req_ie_len;
|
|
if (wpabuf_len(buf) <= len) {
|
|
os_memcpy(wpa_s->sme.assoc_req_ie +
|
|
wpa_s->sme.assoc_req_ie_len,
|
|
wpabuf_head(buf), wpabuf_len(buf));
|
|
wpa_s->sme.assoc_req_ie_len += wpabuf_len(buf);
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_MBO
|
|
mbo_ie = wpa_bss_get_vendor_ie(bss, MBO_IE_VENDOR_TYPE);
|
|
if (mbo_ie) {
|
|
int len;
|
|
|
|
len = wpas_mbo_ie(wpa_s, wpa_s->sme.assoc_req_ie +
|
|
wpa_s->sme.assoc_req_ie_len,
|
|
sizeof(wpa_s->sme.assoc_req_ie) -
|
|
wpa_s->sme.assoc_req_ie_len,
|
|
!!mbo_attr_from_mbo_ie(mbo_ie,
|
|
OCE_ATTR_ID_CAPA_IND));
|
|
if (len >= 0)
|
|
wpa_s->sme.assoc_req_ie_len += len;
|
|
}
|
|
#endif /* CONFIG_MBO */
|
|
|
|
#ifdef CONFIG_SAE
|
|
if (!skip_auth && params.auth_alg == WPA_AUTH_ALG_SAE &&
|
|
pmksa_cache_set_current(wpa_s->wpa, NULL, bss->bssid, ssid, 0,
|
|
NULL,
|
|
wpa_s->key_mgmt == WPA_KEY_MGMT_FT_SAE ?
|
|
WPA_KEY_MGMT_FT_SAE :
|
|
WPA_KEY_MGMT_SAE) == 0) {
|
|
wpa_dbg(wpa_s, MSG_DEBUG,
|
|
"PMKSA cache entry found - try to use PMKSA caching instead of new SAE authentication");
|
|
wpa_sm_set_pmk_from_pmksa(wpa_s->wpa);
|
|
params.auth_alg = WPA_AUTH_ALG_OPEN;
|
|
wpa_s->sme.sae_pmksa_caching = 1;
|
|
}
|
|
|
|
if (!skip_auth && params.auth_alg == WPA_AUTH_ALG_SAE) {
|
|
if (start)
|
|
resp = sme_auth_build_sae_commit(wpa_s, ssid,
|
|
bss->bssid, 0,
|
|
start == 2);
|
|
else
|
|
resp = sme_auth_build_sae_confirm(wpa_s, 0);
|
|
if (resp == NULL) {
|
|
wpas_connection_failed(wpa_s, bss->bssid);
|
|
return;
|
|
}
|
|
params.auth_data = wpabuf_head(resp);
|
|
params.auth_data_len = wpabuf_len(resp);
|
|
wpa_s->sme.sae.state = start ? SAE_COMMITTED : SAE_CONFIRMED;
|
|
}
|
|
#endif /* CONFIG_SAE */
|
|
|
|
old_ssid = wpa_s->current_ssid;
|
|
wpa_s->current_ssid = ssid;
|
|
wpa_supplicant_rsn_supp_set_config(wpa_s, wpa_s->current_ssid);
|
|
wpa_supplicant_initiate_eapol(wpa_s);
|
|
|
|
#ifdef CONFIG_FILS
|
|
/* TODO: FILS operations can in some cases be done between different
|
|
* network_ctx (i.e., same credentials can be used with multiple
|
|
* networks). */
|
|
if (params.auth_alg == WPA_AUTH_ALG_OPEN &&
|
|
wpa_key_mgmt_fils(ssid->key_mgmt)) {
|
|
const u8 *indic;
|
|
u16 fils_info;
|
|
const u8 *realm, *username, *rrk;
|
|
size_t realm_len, username_len, rrk_len;
|
|
u16 next_seq_num;
|
|
|
|
/*
|
|
* Check FILS Indication element (FILS Information field) bits
|
|
* indicating supported authentication algorithms against local
|
|
* configuration (ssid->fils_dh_group). Try to use FILS
|
|
* authentication only if the AP supports the combination in the
|
|
* network profile. */
|
|
indic = wpa_bss_get_ie(bss, WLAN_EID_FILS_INDICATION);
|
|
if (!indic || indic[1] < 2) {
|
|
wpa_printf(MSG_DEBUG, "SME: " MACSTR
|
|
" does not include FILS Indication element - cannot use FILS authentication with it",
|
|
MAC2STR(bss->bssid));
|
|
goto no_fils;
|
|
}
|
|
|
|
fils_info = WPA_GET_LE16(indic + 2);
|
|
if (ssid->fils_dh_group == 0 && !(fils_info & BIT(9))) {
|
|
wpa_printf(MSG_DEBUG, "SME: " MACSTR
|
|
" does not support FILS SK without PFS - cannot use FILS authentication with it",
|
|
MAC2STR(bss->bssid));
|
|
goto no_fils;
|
|
}
|
|
if (ssid->fils_dh_group != 0 && !(fils_info & BIT(10))) {
|
|
wpa_printf(MSG_DEBUG, "SME: " MACSTR
|
|
" does not support FILS SK with PFS - cannot use FILS authentication with it",
|
|
MAC2STR(bss->bssid));
|
|
goto no_fils;
|
|
}
|
|
|
|
if (wpa_s->last_con_fail_realm &&
|
|
eapol_sm_get_erp_info(wpa_s->eapol, &ssid->eap,
|
|
&username, &username_len,
|
|
&realm, &realm_len, &next_seq_num,
|
|
&rrk, &rrk_len) == 0 &&
|
|
realm && realm_len == wpa_s->last_con_fail_realm_len &&
|
|
os_memcmp(realm, wpa_s->last_con_fail_realm,
|
|
realm_len) == 0) {
|
|
wpa_printf(MSG_DEBUG,
|
|
"SME: FILS authentication for this realm failed last time - try to regenerate ERP key hierarchy");
|
|
goto no_fils;
|
|
}
|
|
|
|
if (pmksa_cache_set_current(wpa_s->wpa, NULL, bss->bssid,
|
|
ssid, 0,
|
|
wpa_bss_get_fils_cache_id(bss),
|
|
0) == 0)
|
|
wpa_printf(MSG_DEBUG,
|
|
"SME: Try to use FILS with PMKSA caching");
|
|
resp = fils_build_auth(wpa_s->wpa, ssid->fils_dh_group, md);
|
|
if (resp) {
|
|
int auth_alg;
|
|
|
|
if (ssid->fils_dh_group)
|
|
wpa_printf(MSG_DEBUG,
|
|
"SME: Try to use FILS SK authentication with PFS (DH Group %u)",
|
|
ssid->fils_dh_group);
|
|
else
|
|
wpa_printf(MSG_DEBUG,
|
|
"SME: Try to use FILS SK authentication without PFS");
|
|
auth_alg = ssid->fils_dh_group ?
|
|
WPA_AUTH_ALG_FILS_SK_PFS : WPA_AUTH_ALG_FILS;
|
|
params.auth_alg = auth_alg;
|
|
params.auth_data = wpabuf_head(resp);
|
|
params.auth_data_len = wpabuf_len(resp);
|
|
wpa_s->sme.auth_alg = auth_alg;
|
|
}
|
|
}
|
|
no_fils:
|
|
#endif /* CONFIG_FILS */
|
|
|
|
wpa_supplicant_cancel_sched_scan(wpa_s);
|
|
wpa_supplicant_cancel_scan(wpa_s);
|
|
|
|
wpa_msg(wpa_s, MSG_INFO, "SME: Trying to authenticate with " MACSTR
|
|
" (SSID='%s' freq=%d MHz)", MAC2STR(params.bssid),
|
|
wpa_ssid_txt(params.ssid, params.ssid_len), params.freq);
|
|
|
|
eapol_sm_notify_portValid(wpa_s->eapol, FALSE);
|
|
wpa_clear_keys(wpa_s, bss->bssid);
|
|
wpa_supplicant_set_state(wpa_s, WPA_AUTHENTICATING);
|
|
if (old_ssid != wpa_s->current_ssid)
|
|
wpas_notify_network_changed(wpa_s);
|
|
|
|
#ifdef CONFIG_HS20
|
|
hs20_configure_frame_filters(wpa_s);
|
|
#endif /* CONFIG_HS20 */
|
|
|
|
#ifdef CONFIG_P2P
|
|
/*
|
|
* If multi-channel concurrency is not supported, check for any
|
|
* frequency conflict. In case of any frequency conflict, remove the
|
|
* least prioritized connection.
|
|
*/
|
|
if (wpa_s->num_multichan_concurrent < 2) {
|
|
int freq, num;
|
|
num = get_shared_radio_freqs(wpa_s, &freq, 1);
|
|
if (num > 0 && freq > 0 && freq != params.freq) {
|
|
wpa_printf(MSG_DEBUG,
|
|
"Conflicting frequency found (%d != %d)",
|
|
freq, params.freq);
|
|
if (wpas_p2p_handle_frequency_conflicts(wpa_s,
|
|
params.freq,
|
|
ssid) < 0) {
|
|
wpas_connection_failed(wpa_s, bss->bssid);
|
|
wpa_supplicant_mark_disassoc(wpa_s);
|
|
wpabuf_free(resp);
|
|
wpas_connect_work_done(wpa_s);
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
#endif /* CONFIG_P2P */
|
|
|
|
if (skip_auth) {
|
|
wpa_msg(wpa_s, MSG_DEBUG,
|
|
"SME: Skip authentication step on reassoc-to-same-BSS");
|
|
wpabuf_free(resp);
|
|
sme_associate(wpa_s, ssid->mode, bss->bssid, WLAN_AUTH_OPEN);
|
|
return;
|
|
}
|
|
|
|
|
|
wpa_s->sme.auth_alg = params.auth_alg;
|
|
if (wpa_drv_authenticate(wpa_s, ¶ms) < 0) {
|
|
wpa_msg(wpa_s, MSG_INFO, "SME: Authentication request to the "
|
|
"driver failed");
|
|
wpas_connection_failed(wpa_s, bss->bssid);
|
|
wpa_supplicant_mark_disassoc(wpa_s);
|
|
wpabuf_free(resp);
|
|
wpas_connect_work_done(wpa_s);
|
|
return;
|
|
}
|
|
|
|
eloop_register_timeout(SME_AUTH_TIMEOUT, 0, sme_auth_timer, wpa_s,
|
|
NULL);
|
|
|
|
/*
|
|
* Association will be started based on the authentication event from
|
|
* the driver.
|
|
*/
|
|
|
|
wpabuf_free(resp);
|
|
}
|
|
|
|
|
|
static void sme_auth_start_cb(struct wpa_radio_work *work, int deinit)
|
|
{
|
|
struct wpa_connect_work *cwork = work->ctx;
|
|
struct wpa_supplicant *wpa_s = work->wpa_s;
|
|
|
|
if (deinit) {
|
|
if (work->started)
|
|
wpa_s->connect_work = NULL;
|
|
|
|
wpas_connect_work_free(cwork);
|
|
return;
|
|
}
|
|
|
|
wpa_s->connect_work = work;
|
|
|
|
if (cwork->bss_removed ||
|
|
!wpas_valid_bss_ssid(wpa_s, cwork->bss, cwork->ssid) ||
|
|
wpas_network_disabled(wpa_s, cwork->ssid)) {
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "SME: BSS/SSID entry for authentication not valid anymore - drop connection attempt");
|
|
wpas_connect_work_done(wpa_s);
|
|
return;
|
|
}
|
|
|
|
/* Starting new connection, so clear the possibly used WPA IE from the
|
|
* previous association. */
|
|
wpa_sm_set_assoc_wpa_ie(wpa_s->wpa, NULL, 0);
|
|
|
|
sme_send_authentication(wpa_s, cwork->bss, cwork->ssid, 1);
|
|
}
|
|
|
|
|
|
void sme_authenticate(struct wpa_supplicant *wpa_s,
|
|
struct wpa_bss *bss, struct wpa_ssid *ssid)
|
|
{
|
|
struct wpa_connect_work *cwork;
|
|
|
|
if (bss == NULL || ssid == NULL)
|
|
return;
|
|
if (wpa_s->connect_work) {
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Reject sme_authenticate() call since connect_work exist");
|
|
return;
|
|
}
|
|
|
|
if (radio_work_pending(wpa_s, "sme-connect")) {
|
|
/*
|
|
* The previous sme-connect work might no longer be valid due to
|
|
* the fact that the BSS list was updated. In addition, it makes
|
|
* sense to adhere to the 'newer' decision.
|
|
*/
|
|
wpa_dbg(wpa_s, MSG_DEBUG,
|
|
"SME: Remove previous pending sme-connect");
|
|
radio_remove_works(wpa_s, "sme-connect", 0);
|
|
}
|
|
|
|
wpas_abort_ongoing_scan(wpa_s);
|
|
|
|
cwork = os_zalloc(sizeof(*cwork));
|
|
if (cwork == NULL)
|
|
return;
|
|
cwork->bss = bss;
|
|
cwork->ssid = ssid;
|
|
cwork->sme = 1;
|
|
|
|
#ifdef CONFIG_SAE
|
|
wpa_s->sme.sae.state = SAE_NOTHING;
|
|
wpa_s->sme.sae.send_confirm = 0;
|
|
wpa_s->sme.sae_group_index = 0;
|
|
#endif /* CONFIG_SAE */
|
|
|
|
if (radio_add_work(wpa_s, bss->freq, "sme-connect", 1,
|
|
sme_auth_start_cb, cwork) < 0)
|
|
wpas_connect_work_free(cwork);
|
|
}
|
|
|
|
|
|
#ifdef CONFIG_SAE
|
|
|
|
static int sme_external_auth_build_buf(struct wpabuf *buf,
|
|
struct wpabuf *params,
|
|
const u8 *sa, const u8 *da,
|
|
u16 auth_transaction, u16 seq_num)
|
|
{
|
|
struct ieee80211_mgmt *resp;
|
|
|
|
resp = wpabuf_put(buf, offsetof(struct ieee80211_mgmt,
|
|
u.auth.variable));
|
|
|
|
resp->frame_control = host_to_le16((WLAN_FC_TYPE_MGMT << 2) |
|
|
(WLAN_FC_STYPE_AUTH << 4));
|
|
os_memcpy(resp->da, da, ETH_ALEN);
|
|
os_memcpy(resp->sa, sa, ETH_ALEN);
|
|
os_memcpy(resp->bssid, da, ETH_ALEN);
|
|
resp->u.auth.auth_alg = host_to_le16(WLAN_AUTH_SAE);
|
|
resp->seq_ctrl = host_to_le16(seq_num << 4);
|
|
resp->u.auth.auth_transaction = host_to_le16(auth_transaction);
|
|
resp->u.auth.status_code = host_to_le16(WLAN_STATUS_SUCCESS);
|
|
if (params)
|
|
wpabuf_put_buf(buf, params);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int sme_external_auth_send_sae_commit(struct wpa_supplicant *wpa_s,
|
|
const u8 *bssid,
|
|
struct wpa_ssid *ssid)
|
|
{
|
|
struct wpabuf *resp, *buf;
|
|
|
|
resp = sme_auth_build_sae_commit(wpa_s, ssid, bssid, 1, 0);
|
|
if (!resp) {
|
|
wpa_printf(MSG_DEBUG, "SAE: Failed to build SAE commit");
|
|
return -1;
|
|
}
|
|
|
|
wpa_s->sme.sae.state = SAE_COMMITTED;
|
|
buf = wpabuf_alloc(4 + SAE_COMMIT_MAX_LEN + wpabuf_len(resp));
|
|
if (!buf) {
|
|
wpabuf_free(resp);
|
|
return -1;
|
|
}
|
|
|
|
wpa_s->sme.seq_num++;
|
|
sme_external_auth_build_buf(buf, resp, wpa_s->own_addr,
|
|
bssid, 1, wpa_s->sme.seq_num);
|
|
wpa_drv_send_mlme(wpa_s, wpabuf_head(buf), wpabuf_len(buf), 1, 0);
|
|
wpabuf_free(resp);
|
|
wpabuf_free(buf);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static void sme_send_external_auth_status(struct wpa_supplicant *wpa_s,
|
|
u16 status)
|
|
{
|
|
struct external_auth params;
|
|
|
|
os_memset(¶ms, 0, sizeof(params));
|
|
params.status = status;
|
|
params.ssid = wpa_s->sme.ext_auth_ssid;
|
|
params.ssid_len = wpa_s->sme.ext_auth_ssid_len;
|
|
params.bssid = wpa_s->sme.ext_auth_bssid;
|
|
wpa_drv_send_external_auth_status(wpa_s, ¶ms);
|
|
}
|
|
|
|
|
|
static int sme_handle_external_auth_start(struct wpa_supplicant *wpa_s,
|
|
union wpa_event_data *data)
|
|
{
|
|
struct wpa_ssid *ssid;
|
|
size_t ssid_str_len = data->external_auth.ssid_len;
|
|
const u8 *ssid_str = data->external_auth.ssid;
|
|
|
|
/* Get the SSID conf from the ssid string obtained */
|
|
for (ssid = wpa_s->conf->ssid; ssid; ssid = ssid->next) {
|
|
if (!wpas_network_disabled(wpa_s, ssid) &&
|
|
ssid_str_len == ssid->ssid_len &&
|
|
os_memcmp(ssid_str, ssid->ssid, ssid_str_len) == 0 &&
|
|
(ssid->key_mgmt & (WPA_KEY_MGMT_SAE | WPA_KEY_MGMT_FT_SAE)))
|
|
break;
|
|
}
|
|
if (!ssid ||
|
|
sme_external_auth_send_sae_commit(wpa_s, data->external_auth.bssid,
|
|
ssid) < 0)
|
|
return -1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static void sme_external_auth_send_sae_confirm(struct wpa_supplicant *wpa_s,
|
|
const u8 *da)
|
|
{
|
|
struct wpabuf *resp, *buf;
|
|
|
|
resp = sme_auth_build_sae_confirm(wpa_s, 1);
|
|
if (!resp) {
|
|
wpa_printf(MSG_DEBUG, "SAE: Confirm message buf alloc failure");
|
|
return;
|
|
}
|
|
|
|
wpa_s->sme.sae.state = SAE_CONFIRMED;
|
|
buf = wpabuf_alloc(4 + SAE_CONFIRM_MAX_LEN + wpabuf_len(resp));
|
|
if (!buf) {
|
|
wpa_printf(MSG_DEBUG, "SAE: Auth Confirm buf alloc failure");
|
|
wpabuf_free(resp);
|
|
return;
|
|
}
|
|
wpa_s->sme.seq_num++;
|
|
sme_external_auth_build_buf(buf, resp, wpa_s->own_addr,
|
|
da, 2, wpa_s->sme.seq_num);
|
|
wpa_drv_send_mlme(wpa_s, wpabuf_head(buf), wpabuf_len(buf), 1, 0);
|
|
wpabuf_free(resp);
|
|
wpabuf_free(buf);
|
|
}
|
|
|
|
|
|
void sme_external_auth_trigger(struct wpa_supplicant *wpa_s,
|
|
union wpa_event_data *data)
|
|
{
|
|
if (RSN_SELECTOR_GET(&data->external_auth.key_mgmt_suite) !=
|
|
RSN_AUTH_KEY_MGMT_SAE)
|
|
return;
|
|
|
|
if (data->external_auth.action == EXT_AUTH_START) {
|
|
if (!data->external_auth.bssid || !data->external_auth.ssid)
|
|
return;
|
|
os_memcpy(wpa_s->sme.ext_auth_bssid, data->external_auth.bssid,
|
|
ETH_ALEN);
|
|
os_memcpy(wpa_s->sme.ext_auth_ssid, data->external_auth.ssid,
|
|
data->external_auth.ssid_len);
|
|
wpa_s->sme.ext_auth_ssid_len = data->external_auth.ssid_len;
|
|
wpa_s->sme.seq_num = 0;
|
|
wpa_s->sme.sae.state = SAE_NOTHING;
|
|
wpa_s->sme.sae.send_confirm = 0;
|
|
wpa_s->sme.sae_group_index = 0;
|
|
if (sme_handle_external_auth_start(wpa_s, data) < 0)
|
|
sme_send_external_auth_status(wpa_s,
|
|
WLAN_STATUS_UNSPECIFIED_FAILURE);
|
|
} else if (data->external_auth.action == EXT_AUTH_ABORT) {
|
|
/* Report failure to driver for the wrong trigger */
|
|
sme_send_external_auth_status(wpa_s,
|
|
WLAN_STATUS_UNSPECIFIED_FAILURE);
|
|
}
|
|
}
|
|
|
|
|
|
static int sme_sae_auth(struct wpa_supplicant *wpa_s, u16 auth_transaction,
|
|
u16 status_code, const u8 *data, size_t len,
|
|
int external, const u8 *sa)
|
|
{
|
|
int *groups;
|
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "SME: SAE authentication transaction %u "
|
|
"status code %u", auth_transaction, status_code);
|
|
|
|
if (auth_transaction == 1 &&
|
|
status_code == WLAN_STATUS_ANTI_CLOGGING_TOKEN_REQ &&
|
|
wpa_s->sme.sae.state == SAE_COMMITTED &&
|
|
(external || wpa_s->current_bss) && wpa_s->current_ssid) {
|
|
int default_groups[] = { 19, 20, 21, 0 };
|
|
u16 group;
|
|
|
|
groups = wpa_s->conf->sae_groups;
|
|
if (!groups || groups[0] <= 0)
|
|
groups = default_groups;
|
|
|
|
if (len < sizeof(le16)) {
|
|
wpa_dbg(wpa_s, MSG_DEBUG,
|
|
"SME: Too short SAE anti-clogging token request");
|
|
return -1;
|
|
}
|
|
group = WPA_GET_LE16(data);
|
|
wpa_dbg(wpa_s, MSG_DEBUG,
|
|
"SME: SAE anti-clogging token requested (group %u)",
|
|
group);
|
|
if (sae_group_allowed(&wpa_s->sme.sae, groups, group) !=
|
|
WLAN_STATUS_SUCCESS) {
|
|
wpa_dbg(wpa_s, MSG_ERROR,
|
|
"SME: SAE group %u of anti-clogging request is invalid",
|
|
group);
|
|
return -1;
|
|
}
|
|
wpabuf_free(wpa_s->sme.sae_token);
|
|
wpa_s->sme.sae_token = wpabuf_alloc_copy(data + sizeof(le16),
|
|
len - sizeof(le16));
|
|
if (!external)
|
|
sme_send_authentication(wpa_s, wpa_s->current_bss,
|
|
wpa_s->current_ssid, 2);
|
|
else
|
|
sme_external_auth_send_sae_commit(
|
|
wpa_s, wpa_s->sme.ext_auth_bssid,
|
|
wpa_s->current_ssid);
|
|
return 0;
|
|
}
|
|
|
|
if (auth_transaction == 1 &&
|
|
status_code == WLAN_STATUS_FINITE_CYCLIC_GROUP_NOT_SUPPORTED &&
|
|
wpa_s->sme.sae.state == SAE_COMMITTED &&
|
|
(external || wpa_s->current_bss) && wpa_s->current_ssid) {
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "SME: SAE group not supported");
|
|
wpa_s->sme.sae_group_index++;
|
|
if (sme_set_sae_group(wpa_s) < 0)
|
|
return -1; /* no other groups enabled */
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Try next enabled SAE group");
|
|
if (!external)
|
|
sme_send_authentication(wpa_s, wpa_s->current_bss,
|
|
wpa_s->current_ssid, 1);
|
|
else
|
|
sme_external_auth_send_sae_commit(
|
|
wpa_s, wpa_s->sme.ext_auth_bssid,
|
|
wpa_s->current_ssid);
|
|
return 0;
|
|
}
|
|
|
|
if (auth_transaction == 1 &&
|
|
status_code == WLAN_STATUS_UNKNOWN_PASSWORD_IDENTIFIER) {
|
|
const u8 *bssid = sa ? sa : wpa_s->pending_bssid;
|
|
|
|
wpa_msg(wpa_s, MSG_INFO,
|
|
WPA_EVENT_SAE_UNKNOWN_PASSWORD_IDENTIFIER MACSTR,
|
|
MAC2STR(bssid));
|
|
return -1;
|
|
}
|
|
|
|
if (status_code != WLAN_STATUS_SUCCESS)
|
|
return -1;
|
|
|
|
if (auth_transaction == 1) {
|
|
u16 res;
|
|
|
|
groups = wpa_s->conf->sae_groups;
|
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "SME SAE commit");
|
|
if ((!external && wpa_s->current_bss == NULL) ||
|
|
wpa_s->current_ssid == NULL)
|
|
return -1;
|
|
if (wpa_s->sme.sae.state != SAE_COMMITTED)
|
|
return -1;
|
|
if (groups && groups[0] <= 0)
|
|
groups = NULL;
|
|
res = sae_parse_commit(&wpa_s->sme.sae, data, len, NULL, NULL,
|
|
groups);
|
|
if (res == SAE_SILENTLY_DISCARD) {
|
|
wpa_printf(MSG_DEBUG,
|
|
"SAE: Drop commit message due to reflection attack");
|
|
return 0;
|
|
}
|
|
if (res != WLAN_STATUS_SUCCESS)
|
|
return -1;
|
|
|
|
if (sae_process_commit(&wpa_s->sme.sae) < 0) {
|
|
wpa_printf(MSG_DEBUG, "SAE: Failed to process peer "
|
|
"commit");
|
|
return -1;
|
|
}
|
|
|
|
wpabuf_free(wpa_s->sme.sae_token);
|
|
wpa_s->sme.sae_token = NULL;
|
|
if (!external)
|
|
sme_send_authentication(wpa_s, wpa_s->current_bss,
|
|
wpa_s->current_ssid, 0);
|
|
else
|
|
sme_external_auth_send_sae_confirm(wpa_s, sa);
|
|
return 0;
|
|
} else if (auth_transaction == 2) {
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "SME SAE confirm");
|
|
if (wpa_s->sme.sae.state != SAE_CONFIRMED)
|
|
return -1;
|
|
if (sae_check_confirm(&wpa_s->sme.sae, data, len) < 0)
|
|
return -1;
|
|
wpa_s->sme.sae.state = SAE_ACCEPTED;
|
|
sae_clear_temp_data(&wpa_s->sme.sae);
|
|
|
|
if (external) {
|
|
/* Report success to driver */
|
|
sme_send_external_auth_status(wpa_s,
|
|
WLAN_STATUS_SUCCESS);
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
return -1;
|
|
}
|
|
|
|
|
|
void sme_external_auth_mgmt_rx(struct wpa_supplicant *wpa_s,
|
|
const u8 *auth_frame, size_t len)
|
|
{
|
|
const struct ieee80211_mgmt *header;
|
|
size_t auth_length;
|
|
|
|
header = (const struct ieee80211_mgmt *) auth_frame;
|
|
auth_length = IEEE80211_HDRLEN + sizeof(header->u.auth);
|
|
|
|
if (len < auth_length) {
|
|
/* Notify failure to the driver */
|
|
sme_send_external_auth_status(wpa_s,
|
|
WLAN_STATUS_UNSPECIFIED_FAILURE);
|
|
return;
|
|
}
|
|
|
|
if (le_to_host16(header->u.auth.auth_alg) == WLAN_AUTH_SAE) {
|
|
int res;
|
|
|
|
res = sme_sae_auth(
|
|
wpa_s, le_to_host16(header->u.auth.auth_transaction),
|
|
le_to_host16(header->u.auth.status_code),
|
|
header->u.auth.variable,
|
|
len - auth_length, 1, header->sa);
|
|
if (res < 0) {
|
|
/* Notify failure to the driver */
|
|
sme_send_external_auth_status(
|
|
wpa_s, WLAN_STATUS_UNSPECIFIED_FAILURE);
|
|
return;
|
|
}
|
|
if (res != 1)
|
|
return;
|
|
|
|
wpa_printf(MSG_DEBUG,
|
|
"SME: SAE completed - setting PMK for 4-way handshake");
|
|
wpa_sm_set_pmk(wpa_s->wpa, wpa_s->sme.sae.pmk, PMK_LEN,
|
|
wpa_s->sme.sae.pmkid, wpa_s->pending_bssid);
|
|
}
|
|
}
|
|
|
|
#endif /* CONFIG_SAE */
|
|
|
|
|
|
void sme_event_auth(struct wpa_supplicant *wpa_s, union wpa_event_data *data)
|
|
{
|
|
struct wpa_ssid *ssid = wpa_s->current_ssid;
|
|
|
|
if (ssid == NULL) {
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Ignore authentication event "
|
|
"when network is not selected");
|
|
return;
|
|
}
|
|
|
|
if (wpa_s->wpa_state != WPA_AUTHENTICATING) {
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Ignore authentication event "
|
|
"when not in authenticating state");
|
|
return;
|
|
}
|
|
|
|
if (os_memcmp(wpa_s->pending_bssid, data->auth.peer, ETH_ALEN) != 0) {
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Ignore authentication with "
|
|
"unexpected peer " MACSTR,
|
|
MAC2STR(data->auth.peer));
|
|
return;
|
|
}
|
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Authentication response: peer=" MACSTR
|
|
" auth_type=%d auth_transaction=%d status_code=%d",
|
|
MAC2STR(data->auth.peer), data->auth.auth_type,
|
|
data->auth.auth_transaction, data->auth.status_code);
|
|
wpa_hexdump(MSG_MSGDUMP, "SME: Authentication response IEs",
|
|
data->auth.ies, data->auth.ies_len);
|
|
|
|
eloop_cancel_timeout(sme_auth_timer, wpa_s, NULL);
|
|
|
|
#ifdef CONFIG_SAE
|
|
if (data->auth.auth_type == WLAN_AUTH_SAE) {
|
|
int res;
|
|
res = sme_sae_auth(wpa_s, data->auth.auth_transaction,
|
|
data->auth.status_code, data->auth.ies,
|
|
data->auth.ies_len, 0, NULL);
|
|
if (res < 0) {
|
|
wpas_connection_failed(wpa_s, wpa_s->pending_bssid);
|
|
wpa_supplicant_set_state(wpa_s, WPA_DISCONNECTED);
|
|
|
|
}
|
|
if (res != 1)
|
|
return;
|
|
|
|
wpa_printf(MSG_DEBUG, "SME: SAE completed - setting PMK for "
|
|
"4-way handshake");
|
|
wpa_sm_set_pmk(wpa_s->wpa, wpa_s->sme.sae.pmk, PMK_LEN,
|
|
wpa_s->sme.sae.pmkid, wpa_s->pending_bssid);
|
|
}
|
|
#endif /* CONFIG_SAE */
|
|
|
|
if (data->auth.status_code != WLAN_STATUS_SUCCESS) {
|
|
char *ie_txt = NULL;
|
|
|
|
if (data->auth.ies && data->auth.ies_len) {
|
|
size_t buflen = 2 * data->auth.ies_len + 1;
|
|
ie_txt = os_malloc(buflen);
|
|
if (ie_txt) {
|
|
wpa_snprintf_hex(ie_txt, buflen, data->auth.ies,
|
|
data->auth.ies_len);
|
|
}
|
|
}
|
|
wpa_msg(wpa_s, MSG_INFO, WPA_EVENT_AUTH_REJECT MACSTR
|
|
" auth_type=%u auth_transaction=%u status_code=%u%s%s",
|
|
MAC2STR(data->auth.peer), data->auth.auth_type,
|
|
data->auth.auth_transaction, data->auth.status_code,
|
|
ie_txt ? " ie=" : "",
|
|
ie_txt ? ie_txt : "");
|
|
os_free(ie_txt);
|
|
|
|
#ifdef CONFIG_FILS
|
|
if (wpa_s->sme.auth_alg == WPA_AUTH_ALG_FILS ||
|
|
wpa_s->sme.auth_alg == WPA_AUTH_ALG_FILS_SK_PFS)
|
|
fils_connection_failure(wpa_s);
|
|
#endif /* CONFIG_FILS */
|
|
|
|
if (data->auth.status_code !=
|
|
WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG ||
|
|
wpa_s->sme.auth_alg == data->auth.auth_type ||
|
|
wpa_s->current_ssid->auth_alg == WPA_AUTH_ALG_LEAP) {
|
|
wpas_connection_failed(wpa_s, wpa_s->pending_bssid);
|
|
wpa_supplicant_set_state(wpa_s, WPA_DISCONNECTED);
|
|
return;
|
|
}
|
|
|
|
wpas_connect_work_done(wpa_s);
|
|
|
|
switch (data->auth.auth_type) {
|
|
case WLAN_AUTH_OPEN:
|
|
wpa_s->current_ssid->auth_alg = WPA_AUTH_ALG_SHARED;
|
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Trying SHARED auth");
|
|
wpa_supplicant_associate(wpa_s, wpa_s->current_bss,
|
|
wpa_s->current_ssid);
|
|
return;
|
|
|
|
case WLAN_AUTH_SHARED_KEY:
|
|
wpa_s->current_ssid->auth_alg = WPA_AUTH_ALG_LEAP;
|
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Trying LEAP auth");
|
|
wpa_supplicant_associate(wpa_s, wpa_s->current_bss,
|
|
wpa_s->current_ssid);
|
|
return;
|
|
|
|
default:
|
|
return;
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_IEEE80211R
|
|
if (data->auth.auth_type == WLAN_AUTH_FT) {
|
|
const u8 *ric_ies = NULL;
|
|
size_t ric_ies_len = 0;
|
|
|
|
if (wpa_s->ric_ies) {
|
|
ric_ies = wpabuf_head(wpa_s->ric_ies);
|
|
ric_ies_len = wpabuf_len(wpa_s->ric_ies);
|
|
}
|
|
if (wpa_ft_process_response(wpa_s->wpa, data->auth.ies,
|
|
data->auth.ies_len, 0,
|
|
data->auth.peer,
|
|
ric_ies, ric_ies_len) < 0) {
|
|
wpa_dbg(wpa_s, MSG_DEBUG,
|
|
"SME: FT Authentication response processing failed");
|
|
wpa_msg(wpa_s, MSG_INFO, WPA_EVENT_DISCONNECTED "bssid="
|
|
MACSTR
|
|
" reason=%d locally_generated=1",
|
|
MAC2STR(wpa_s->pending_bssid),
|
|
WLAN_REASON_DEAUTH_LEAVING);
|
|
wpas_connection_failed(wpa_s, wpa_s->pending_bssid);
|
|
wpa_supplicant_mark_disassoc(wpa_s);
|
|
return;
|
|
}
|
|
}
|
|
#endif /* CONFIG_IEEE80211R */
|
|
|
|
#ifdef CONFIG_FILS
|
|
if (data->auth.auth_type == WLAN_AUTH_FILS_SK ||
|
|
data->auth.auth_type == WLAN_AUTH_FILS_SK_PFS) {
|
|
u16 expect_auth_type;
|
|
|
|
expect_auth_type = wpa_s->sme.auth_alg ==
|
|
WPA_AUTH_ALG_FILS_SK_PFS ? WLAN_AUTH_FILS_SK_PFS :
|
|
WLAN_AUTH_FILS_SK;
|
|
if (data->auth.auth_type != expect_auth_type) {
|
|
wpa_dbg(wpa_s, MSG_DEBUG,
|
|
"SME: FILS Authentication response used different auth alg (%u; expected %u)",
|
|
data->auth.auth_type, expect_auth_type);
|
|
wpa_msg(wpa_s, MSG_INFO, WPA_EVENT_DISCONNECTED "bssid="
|
|
MACSTR
|
|
" reason=%d locally_generated=1",
|
|
MAC2STR(wpa_s->pending_bssid),
|
|
WLAN_REASON_DEAUTH_LEAVING);
|
|
wpas_connection_failed(wpa_s, wpa_s->pending_bssid);
|
|
wpa_supplicant_mark_disassoc(wpa_s);
|
|
return;
|
|
}
|
|
|
|
if (fils_process_auth(wpa_s->wpa, wpa_s->pending_bssid,
|
|
data->auth.ies, data->auth.ies_len) < 0) {
|
|
wpa_dbg(wpa_s, MSG_DEBUG,
|
|
"SME: FILS Authentication response processing failed");
|
|
wpa_msg(wpa_s, MSG_INFO, WPA_EVENT_DISCONNECTED "bssid="
|
|
MACSTR
|
|
" reason=%d locally_generated=1",
|
|
MAC2STR(wpa_s->pending_bssid),
|
|
WLAN_REASON_DEAUTH_LEAVING);
|
|
wpas_connection_failed(wpa_s, wpa_s->pending_bssid);
|
|
wpa_supplicant_mark_disassoc(wpa_s);
|
|
return;
|
|
}
|
|
}
|
|
#endif /* CONFIG_FILS */
|
|
|
|
sme_associate(wpa_s, ssid->mode, data->auth.peer,
|
|
data->auth.auth_type);
|
|
}
|
|
|
|
|
|
#ifdef CONFIG_IEEE80211R
|
|
static void remove_ie(u8 *buf, size_t *len, u8 eid)
|
|
{
|
|
u8 *pos, *next, *end;
|
|
|
|
pos = (u8 *) get_ie(buf, *len, eid);
|
|
if (pos) {
|
|
next = pos + 2 + pos[1];
|
|
end = buf + *len;
|
|
*len -= 2 + pos[1];
|
|
os_memmove(pos, next, end - next);
|
|
}
|
|
}
|
|
#endif /* CONFIG_IEEE80211R */
|
|
|
|
|
|
void sme_associate(struct wpa_supplicant *wpa_s, enum wpas_mode mode,
|
|
const u8 *bssid, u16 auth_type)
|
|
{
|
|
struct wpa_driver_associate_params params;
|
|
struct ieee802_11_elems elems;
|
|
#ifdef CONFIG_FILS
|
|
u8 nonces[2 * FILS_NONCE_LEN];
|
|
#endif /* CONFIG_FILS */
|
|
#ifdef CONFIG_HT_OVERRIDES
|
|
struct ieee80211_ht_capabilities htcaps;
|
|
struct ieee80211_ht_capabilities htcaps_mask;
|
|
#endif /* CONFIG_HT_OVERRIDES */
|
|
#ifdef CONFIG_VHT_OVERRIDES
|
|
struct ieee80211_vht_capabilities vhtcaps;
|
|
struct ieee80211_vht_capabilities vhtcaps_mask;
|
|
#endif /* CONFIG_VHT_OVERRIDES */
|
|
|
|
os_memset(¶ms, 0, sizeof(params));
|
|
|
|
#ifdef CONFIG_FILS
|
|
if (auth_type == WLAN_AUTH_FILS_SK ||
|
|
auth_type == WLAN_AUTH_FILS_SK_PFS) {
|
|
struct wpabuf *buf;
|
|
const u8 *snonce, *anonce;
|
|
const unsigned int max_hlp = 20;
|
|
struct wpabuf *hlp[max_hlp];
|
|
unsigned int i, num_hlp = 0;
|
|
struct fils_hlp_req *req;
|
|
|
|
dl_list_for_each(req, &wpa_s->fils_hlp_req, struct fils_hlp_req,
|
|
list) {
|
|
hlp[num_hlp] = wpabuf_alloc(2 * ETH_ALEN + 6 +
|
|
wpabuf_len(req->pkt));
|
|
if (!hlp[num_hlp])
|
|
break;
|
|
wpabuf_put_data(hlp[num_hlp], req->dst, ETH_ALEN);
|
|
wpabuf_put_data(hlp[num_hlp], wpa_s->own_addr,
|
|
ETH_ALEN);
|
|
wpabuf_put_data(hlp[num_hlp],
|
|
"\xaa\xaa\x03\x00\x00\x00", 6);
|
|
wpabuf_put_buf(hlp[num_hlp], req->pkt);
|
|
num_hlp++;
|
|
if (num_hlp >= max_hlp)
|
|
break;
|
|
}
|
|
|
|
buf = fils_build_assoc_req(wpa_s->wpa, ¶ms.fils_kek,
|
|
¶ms.fils_kek_len, &snonce,
|
|
&anonce,
|
|
(const struct wpabuf **) hlp,
|
|
num_hlp);
|
|
for (i = 0; i < num_hlp; i++)
|
|
wpabuf_free(hlp[i]);
|
|
if (!buf)
|
|
return;
|
|
wpa_hexdump(MSG_DEBUG, "FILS: assoc_req before FILS elements",
|
|
wpa_s->sme.assoc_req_ie,
|
|
wpa_s->sme.assoc_req_ie_len);
|
|
#ifdef CONFIG_IEEE80211R
|
|
if (wpa_key_mgmt_ft(wpa_s->key_mgmt)) {
|
|
/* Remove RSNE and MDE to allow them to be overridden
|
|
* with FILS+FT specific values from
|
|
* fils_build_assoc_req(). */
|
|
remove_ie(wpa_s->sme.assoc_req_ie,
|
|
&wpa_s->sme.assoc_req_ie_len,
|
|
WLAN_EID_RSN);
|
|
wpa_hexdump(MSG_DEBUG,
|
|
"FILS: assoc_req after RSNE removal",
|
|
wpa_s->sme.assoc_req_ie,
|
|
wpa_s->sme.assoc_req_ie_len);
|
|
remove_ie(wpa_s->sme.assoc_req_ie,
|
|
&wpa_s->sme.assoc_req_ie_len,
|
|
WLAN_EID_MOBILITY_DOMAIN);
|
|
wpa_hexdump(MSG_DEBUG,
|
|
"FILS: assoc_req after MDE removal",
|
|
wpa_s->sme.assoc_req_ie,
|
|
wpa_s->sme.assoc_req_ie_len);
|
|
}
|
|
#endif /* CONFIG_IEEE80211R */
|
|
/* TODO: Make wpa_s->sme.assoc_req_ie use dynamic allocation */
|
|
if (wpa_s->sme.assoc_req_ie_len + wpabuf_len(buf) >
|
|
sizeof(wpa_s->sme.assoc_req_ie)) {
|
|
wpa_printf(MSG_ERROR,
|
|
"FILS: Not enough buffer room for own AssocReq elements");
|
|
wpabuf_free(buf);
|
|
return;
|
|
}
|
|
os_memcpy(wpa_s->sme.assoc_req_ie + wpa_s->sme.assoc_req_ie_len,
|
|
wpabuf_head(buf), wpabuf_len(buf));
|
|
wpa_s->sme.assoc_req_ie_len += wpabuf_len(buf);
|
|
wpabuf_free(buf);
|
|
wpa_hexdump(MSG_DEBUG, "FILS: assoc_req after FILS elements",
|
|
wpa_s->sme.assoc_req_ie,
|
|
wpa_s->sme.assoc_req_ie_len);
|
|
|
|
os_memcpy(nonces, snonce, FILS_NONCE_LEN);
|
|
os_memcpy(nonces + FILS_NONCE_LEN, anonce, FILS_NONCE_LEN);
|
|
params.fils_nonces = nonces;
|
|
params.fils_nonces_len = sizeof(nonces);
|
|
}
|
|
#endif /* CONFIG_FILS */
|
|
|
|
#ifdef CONFIG_OWE
|
|
#ifdef CONFIG_TESTING_OPTIONS
|
|
if (get_ie_ext(wpa_s->sme.assoc_req_ie, wpa_s->sme.assoc_req_ie_len,
|
|
WLAN_EID_EXT_OWE_DH_PARAM)) {
|
|
wpa_printf(MSG_INFO, "TESTING: Override OWE DH element");
|
|
} else
|
|
#endif /* CONFIG_TESTING_OPTIONS */
|
|
if (auth_type == WLAN_AUTH_OPEN &&
|
|
wpa_s->key_mgmt == WPA_KEY_MGMT_OWE) {
|
|
struct wpabuf *owe_ie;
|
|
u16 group;
|
|
|
|
if (wpa_s->current_ssid && wpa_s->current_ssid->owe_group) {
|
|
group = wpa_s->current_ssid->owe_group;
|
|
} else if (wpa_s->assoc_status_code ==
|
|
WLAN_STATUS_FINITE_CYCLIC_GROUP_NOT_SUPPORTED) {
|
|
if (wpa_s->last_owe_group == 19)
|
|
group = 20;
|
|
else if (wpa_s->last_owe_group == 20)
|
|
group = 21;
|
|
else
|
|
group = OWE_DH_GROUP;
|
|
} else {
|
|
group = OWE_DH_GROUP;
|
|
}
|
|
|
|
wpa_s->last_owe_group = group;
|
|
wpa_printf(MSG_DEBUG, "OWE: Try to use group %u", group);
|
|
owe_ie = owe_build_assoc_req(wpa_s->wpa, group);
|
|
if (!owe_ie) {
|
|
wpa_printf(MSG_ERROR,
|
|
"OWE: Failed to build IE for Association Request frame");
|
|
return;
|
|
}
|
|
if (wpa_s->sme.assoc_req_ie_len + wpabuf_len(owe_ie) >
|
|
sizeof(wpa_s->sme.assoc_req_ie)) {
|
|
wpa_printf(MSG_ERROR,
|
|
"OWE: Not enough buffer room for own Association Request frame elements");
|
|
wpabuf_free(owe_ie);
|
|
return;
|
|
}
|
|
os_memcpy(wpa_s->sme.assoc_req_ie + wpa_s->sme.assoc_req_ie_len,
|
|
wpabuf_head(owe_ie), wpabuf_len(owe_ie));
|
|
wpa_s->sme.assoc_req_ie_len += wpabuf_len(owe_ie);
|
|
wpabuf_free(owe_ie);
|
|
}
|
|
#endif /* CONFIG_OWE */
|
|
|
|
#ifdef CONFIG_DPP2
|
|
if (wpa_s->key_mgmt == WPA_KEY_MGMT_DPP && wpa_s->current_ssid &&
|
|
wpa_s->current_ssid->dpp_netaccesskey) {
|
|
struct wpa_ssid *ssid = wpa_s->current_ssid;
|
|
|
|
dpp_pfs_free(wpa_s->dpp_pfs);
|
|
wpa_s->dpp_pfs = dpp_pfs_init(ssid->dpp_netaccesskey,
|
|
ssid->dpp_netaccesskey_len);
|
|
if (!wpa_s->dpp_pfs) {
|
|
wpa_printf(MSG_DEBUG, "DPP: Could not initialize PFS");
|
|
/* Try to continue without PFS */
|
|
goto pfs_fail;
|
|
}
|
|
if (wpa_s->sme.assoc_req_ie_len +
|
|
wpabuf_len(wpa_s->dpp_pfs->ie) >
|
|
sizeof(wpa_s->sme.assoc_req_ie)) {
|
|
wpa_printf(MSG_ERROR,
|
|
"DPP: Not enough buffer room for own Association Request frame elements");
|
|
dpp_pfs_free(wpa_s->dpp_pfs);
|
|
wpa_s->dpp_pfs = NULL;
|
|
goto pfs_fail;
|
|
}
|
|
os_memcpy(wpa_s->sme.assoc_req_ie + wpa_s->sme.assoc_req_ie_len,
|
|
wpabuf_head(wpa_s->dpp_pfs->ie),
|
|
wpabuf_len(wpa_s->dpp_pfs->ie));
|
|
wpa_s->sme.assoc_req_ie_len += wpabuf_len(wpa_s->dpp_pfs->ie);
|
|
}
|
|
pfs_fail:
|
|
#endif /* CONFIG_DPP2 */
|
|
|
|
if (wpa_s->current_ssid && wpa_s->current_ssid->multi_ap_backhaul_sta) {
|
|
size_t multi_ap_ie_len;
|
|
|
|
multi_ap_ie_len = add_multi_ap_ie(
|
|
wpa_s->sme.assoc_req_ie + wpa_s->sme.assoc_req_ie_len,
|
|
sizeof(wpa_s->sme.assoc_req_ie) -
|
|
wpa_s->sme.assoc_req_ie_len,
|
|
MULTI_AP_BACKHAUL_STA);
|
|
if (multi_ap_ie_len == 0) {
|
|
wpa_printf(MSG_ERROR,
|
|
"Multi-AP: Failed to build Multi-AP IE");
|
|
return;
|
|
}
|
|
wpa_s->sme.assoc_req_ie_len += multi_ap_ie_len;
|
|
}
|
|
|
|
params.bssid = bssid;
|
|
params.ssid = wpa_s->sme.ssid;
|
|
params.ssid_len = wpa_s->sme.ssid_len;
|
|
params.freq.freq = wpa_s->sme.freq;
|
|
params.bg_scan_period = wpa_s->current_ssid ?
|
|
wpa_s->current_ssid->bg_scan_period : -1;
|
|
params.wpa_ie = wpa_s->sme.assoc_req_ie_len ?
|
|
wpa_s->sme.assoc_req_ie : NULL;
|
|
params.wpa_ie_len = wpa_s->sme.assoc_req_ie_len;
|
|
wpa_hexdump(MSG_DEBUG, "SME: Association Request IEs",
|
|
params.wpa_ie, params.wpa_ie_len);
|
|
params.pairwise_suite = wpa_s->pairwise_cipher;
|
|
params.group_suite = wpa_s->group_cipher;
|
|
params.mgmt_group_suite = wpa_s->mgmt_group_cipher;
|
|
params.key_mgmt_suite = wpa_s->key_mgmt;
|
|
params.wpa_proto = wpa_s->wpa_proto;
|
|
#ifdef CONFIG_HT_OVERRIDES
|
|
os_memset(&htcaps, 0, sizeof(htcaps));
|
|
os_memset(&htcaps_mask, 0, sizeof(htcaps_mask));
|
|
params.htcaps = (u8 *) &htcaps;
|
|
params.htcaps_mask = (u8 *) &htcaps_mask;
|
|
wpa_supplicant_apply_ht_overrides(wpa_s, wpa_s->current_ssid, ¶ms);
|
|
#endif /* CONFIG_HT_OVERRIDES */
|
|
#ifdef CONFIG_VHT_OVERRIDES
|
|
os_memset(&vhtcaps, 0, sizeof(vhtcaps));
|
|
os_memset(&vhtcaps_mask, 0, sizeof(vhtcaps_mask));
|
|
params.vhtcaps = &vhtcaps;
|
|
params.vhtcaps_mask = &vhtcaps_mask;
|
|
wpa_supplicant_apply_vht_overrides(wpa_s, wpa_s->current_ssid, ¶ms);
|
|
#endif /* CONFIG_VHT_OVERRIDES */
|
|
#ifdef CONFIG_IEEE80211R
|
|
if (auth_type == WLAN_AUTH_FT && wpa_s->sme.ft_ies &&
|
|
get_ie(wpa_s->sme.ft_ies, wpa_s->sme.ft_ies_len,
|
|
WLAN_EID_RIC_DATA)) {
|
|
/* There seems to be a pretty inconvenient bug in the Linux
|
|
* kernel IE splitting functionality when RIC is used. For now,
|
|
* skip correct behavior in IE construction here (i.e., drop the
|
|
* additional non-FT-specific IEs) to avoid kernel issues. This
|
|
* is fine since RIC is used only for testing purposes in the
|
|
* current implementation. */
|
|
wpa_printf(MSG_INFO,
|
|
"SME: Linux kernel workaround - do not try to include additional IEs with RIC");
|
|
params.wpa_ie = wpa_s->sme.ft_ies;
|
|
params.wpa_ie_len = wpa_s->sme.ft_ies_len;
|
|
} else if (auth_type == WLAN_AUTH_FT && wpa_s->sme.ft_ies) {
|
|
const u8 *rm_en, *pos, *end;
|
|
size_t rm_en_len = 0;
|
|
u8 *rm_en_dup = NULL, *wpos;
|
|
|
|
/* Remove RSNE, MDE, FTE to allow them to be overridden with
|
|
* FT specific values */
|
|
remove_ie(wpa_s->sme.assoc_req_ie,
|
|
&wpa_s->sme.assoc_req_ie_len,
|
|
WLAN_EID_RSN);
|
|
remove_ie(wpa_s->sme.assoc_req_ie,
|
|
&wpa_s->sme.assoc_req_ie_len,
|
|
WLAN_EID_MOBILITY_DOMAIN);
|
|
remove_ie(wpa_s->sme.assoc_req_ie,
|
|
&wpa_s->sme.assoc_req_ie_len,
|
|
WLAN_EID_FAST_BSS_TRANSITION);
|
|
rm_en = get_ie(wpa_s->sme.assoc_req_ie,
|
|
wpa_s->sme.assoc_req_ie_len,
|
|
WLAN_EID_RRM_ENABLED_CAPABILITIES);
|
|
if (rm_en) {
|
|
/* Need to remove RM Enabled Capabilities element as
|
|
* well temporarily, so that it can be placed between
|
|
* RSNE and MDE. */
|
|
rm_en_len = 2 + rm_en[1];
|
|
rm_en_dup = os_memdup(rm_en, rm_en_len);
|
|
remove_ie(wpa_s->sme.assoc_req_ie,
|
|
&wpa_s->sme.assoc_req_ie_len,
|
|
WLAN_EID_RRM_ENABLED_CAPABILITIES);
|
|
}
|
|
wpa_hexdump(MSG_DEBUG,
|
|
"SME: Association Request IEs after FT IE removal",
|
|
wpa_s->sme.assoc_req_ie,
|
|
wpa_s->sme.assoc_req_ie_len);
|
|
if (wpa_s->sme.assoc_req_ie_len + wpa_s->sme.ft_ies_len +
|
|
rm_en_len > sizeof(wpa_s->sme.assoc_req_ie)) {
|
|
wpa_printf(MSG_ERROR,
|
|
"SME: Not enough buffer room for FT IEs in Association Request frame");
|
|
os_free(rm_en_dup);
|
|
return;
|
|
}
|
|
|
|
os_memmove(wpa_s->sme.assoc_req_ie + wpa_s->sme.ft_ies_len +
|
|
rm_en_len,
|
|
wpa_s->sme.assoc_req_ie,
|
|
wpa_s->sme.assoc_req_ie_len);
|
|
pos = wpa_s->sme.ft_ies;
|
|
end = pos + wpa_s->sme.ft_ies_len;
|
|
wpos = wpa_s->sme.assoc_req_ie;
|
|
if (*pos == WLAN_EID_RSN) {
|
|
os_memcpy(wpos, pos, 2 + pos[1]);
|
|
wpos += 2 + pos[1];
|
|
pos += 2 + pos[1];
|
|
}
|
|
if (rm_en_dup) {
|
|
os_memcpy(wpos, rm_en_dup, rm_en_len);
|
|
wpos += rm_en_len;
|
|
os_free(rm_en_dup);
|
|
}
|
|
os_memcpy(wpos, pos, end - pos);
|
|
wpa_s->sme.assoc_req_ie_len += wpa_s->sme.ft_ies_len +
|
|
rm_en_len;
|
|
params.wpa_ie = wpa_s->sme.assoc_req_ie;
|
|
params.wpa_ie_len = wpa_s->sme.assoc_req_ie_len;
|
|
wpa_hexdump(MSG_DEBUG,
|
|
"SME: Association Request IEs after FT override",
|
|
params.wpa_ie, params.wpa_ie_len);
|
|
}
|
|
#endif /* CONFIG_IEEE80211R */
|
|
params.mode = mode;
|
|
params.mgmt_frame_protection = wpa_s->sme.mfp;
|
|
params.rrm_used = wpa_s->rrm.rrm_used;
|
|
if (wpa_s->sme.prev_bssid_set)
|
|
params.prev_bssid = wpa_s->sme.prev_bssid;
|
|
|
|
wpa_msg(wpa_s, MSG_INFO, "Trying to associate with " MACSTR
|
|
" (SSID='%s' freq=%d MHz)", MAC2STR(params.bssid),
|
|
params.ssid ? wpa_ssid_txt(params.ssid, params.ssid_len) : "",
|
|
params.freq.freq);
|
|
|
|
wpa_supplicant_set_state(wpa_s, WPA_ASSOCIATING);
|
|
|
|
if (params.wpa_ie == NULL ||
|
|
ieee802_11_parse_elems(params.wpa_ie, params.wpa_ie_len, &elems, 0)
|
|
< 0) {
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Could not parse own IEs?!");
|
|
os_memset(&elems, 0, sizeof(elems));
|
|
}
|
|
if (elems.rsn_ie) {
|
|
params.wpa_proto = WPA_PROTO_RSN;
|
|
wpa_sm_set_assoc_wpa_ie(wpa_s->wpa, elems.rsn_ie - 2,
|
|
elems.rsn_ie_len + 2);
|
|
} else if (elems.wpa_ie) {
|
|
params.wpa_proto = WPA_PROTO_WPA;
|
|
wpa_sm_set_assoc_wpa_ie(wpa_s->wpa, elems.wpa_ie - 2,
|
|
elems.wpa_ie_len + 2);
|
|
} else if (elems.osen) {
|
|
params.wpa_proto = WPA_PROTO_OSEN;
|
|
wpa_sm_set_assoc_wpa_ie(wpa_s->wpa, elems.osen - 2,
|
|
elems.osen_len + 2);
|
|
} else
|
|
wpa_sm_set_assoc_wpa_ie(wpa_s->wpa, NULL, 0);
|
|
if (wpa_s->current_ssid && wpa_s->current_ssid->p2p_group)
|
|
params.p2p = 1;
|
|
|
|
if (wpa_s->p2pdev->set_sta_uapsd)
|
|
params.uapsd = wpa_s->p2pdev->sta_uapsd;
|
|
else
|
|
params.uapsd = -1;
|
|
|
|
if (wpa_drv_associate(wpa_s, ¶ms) < 0) {
|
|
wpa_msg(wpa_s, MSG_INFO, "SME: Association request to the "
|
|
"driver failed");
|
|
wpas_connection_failed(wpa_s, wpa_s->pending_bssid);
|
|
wpa_supplicant_set_state(wpa_s, WPA_DISCONNECTED);
|
|
os_memset(wpa_s->pending_bssid, 0, ETH_ALEN);
|
|
return;
|
|
}
|
|
|
|
eloop_register_timeout(SME_ASSOC_TIMEOUT, 0, sme_assoc_timer, wpa_s,
|
|
NULL);
|
|
|
|
#ifdef CONFIG_TESTING_OPTIONS
|
|
wpabuf_free(wpa_s->last_assoc_req_wpa_ie);
|
|
wpa_s->last_assoc_req_wpa_ie = NULL;
|
|
if (params.wpa_ie)
|
|
wpa_s->last_assoc_req_wpa_ie =
|
|
wpabuf_alloc_copy(params.wpa_ie, params.wpa_ie_len);
|
|
#endif /* CONFIG_TESTING_OPTIONS */
|
|
}
|
|
|
|
|
|
int sme_update_ft_ies(struct wpa_supplicant *wpa_s, const u8 *md,
|
|
const u8 *ies, size_t ies_len)
|
|
{
|
|
if (md == NULL || ies == NULL) {
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Remove mobility domain");
|
|
os_free(wpa_s->sme.ft_ies);
|
|
wpa_s->sme.ft_ies = NULL;
|
|
wpa_s->sme.ft_ies_len = 0;
|
|
wpa_s->sme.ft_used = 0;
|
|
return 0;
|
|
}
|
|
|
|
os_memcpy(wpa_s->sme.mobility_domain, md, MOBILITY_DOMAIN_ID_LEN);
|
|
wpa_hexdump(MSG_DEBUG, "SME: FT IEs", ies, ies_len);
|
|
os_free(wpa_s->sme.ft_ies);
|
|
wpa_s->sme.ft_ies = os_memdup(ies, ies_len);
|
|
if (wpa_s->sme.ft_ies == NULL)
|
|
return -1;
|
|
wpa_s->sme.ft_ies_len = ies_len;
|
|
return 0;
|
|
}
|
|
|
|
|
|
static void sme_deauth(struct wpa_supplicant *wpa_s)
|
|
{
|
|
int bssid_changed;
|
|
|
|
bssid_changed = !is_zero_ether_addr(wpa_s->bssid);
|
|
|
|
if (wpa_drv_deauthenticate(wpa_s, wpa_s->pending_bssid,
|
|
WLAN_REASON_DEAUTH_LEAVING) < 0) {
|
|
wpa_msg(wpa_s, MSG_INFO, "SME: Deauth request to the driver "
|
|
"failed");
|
|
}
|
|
wpa_s->sme.prev_bssid_set = 0;
|
|
|
|
wpas_connection_failed(wpa_s, wpa_s->pending_bssid);
|
|
wpa_supplicant_set_state(wpa_s, WPA_DISCONNECTED);
|
|
os_memset(wpa_s->bssid, 0, ETH_ALEN);
|
|
os_memset(wpa_s->pending_bssid, 0, ETH_ALEN);
|
|
if (bssid_changed)
|
|
wpas_notify_bssid_changed(wpa_s);
|
|
}
|
|
|
|
|
|
void sme_event_assoc_reject(struct wpa_supplicant *wpa_s,
|
|
union wpa_event_data *data)
|
|
{
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Association with " MACSTR " failed: "
|
|
"status code %d", MAC2STR(wpa_s->pending_bssid),
|
|
data->assoc_reject.status_code);
|
|
|
|
eloop_cancel_timeout(sme_assoc_timer, wpa_s, NULL);
|
|
|
|
#ifdef CONFIG_SAE
|
|
if (wpa_s->sme.sae_pmksa_caching && wpa_s->current_ssid &&
|
|
wpa_key_mgmt_sae(wpa_s->current_ssid->key_mgmt)) {
|
|
wpa_dbg(wpa_s, MSG_DEBUG,
|
|
"PMKSA caching attempt rejected - drop PMKSA cache entry and fall back to SAE authentication");
|
|
wpa_sm_aborted_cached(wpa_s->wpa);
|
|
wpa_sm_pmksa_cache_flush(wpa_s->wpa, wpa_s->current_ssid);
|
|
if (wpa_s->current_bss) {
|
|
struct wpa_bss *bss = wpa_s->current_bss;
|
|
struct wpa_ssid *ssid = wpa_s->current_ssid;
|
|
|
|
wpa_drv_deauthenticate(wpa_s, wpa_s->pending_bssid,
|
|
WLAN_REASON_DEAUTH_LEAVING);
|
|
wpas_connect_work_done(wpa_s);
|
|
wpa_supplicant_mark_disassoc(wpa_s);
|
|
wpa_supplicant_connect(wpa_s, bss, ssid);
|
|
return;
|
|
}
|
|
}
|
|
#endif /* CONFIG_SAE */
|
|
|
|
/*
|
|
* For now, unconditionally terminate the previous authentication. In
|
|
* theory, this should not be needed, but mac80211 gets quite confused
|
|
* if the authentication is left pending.. Some roaming cases might
|
|
* benefit from using the previous authentication, so this could be
|
|
* optimized in the future.
|
|
*/
|
|
sme_deauth(wpa_s);
|
|
}
|
|
|
|
|
|
void sme_event_auth_timed_out(struct wpa_supplicant *wpa_s,
|
|
union wpa_event_data *data)
|
|
{
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Authentication timed out");
|
|
wpas_connection_failed(wpa_s, wpa_s->pending_bssid);
|
|
wpa_supplicant_mark_disassoc(wpa_s);
|
|
}
|
|
|
|
|
|
void sme_event_assoc_timed_out(struct wpa_supplicant *wpa_s,
|
|
union wpa_event_data *data)
|
|
{
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Association timed out");
|
|
wpas_connection_failed(wpa_s, wpa_s->pending_bssid);
|
|
wpa_supplicant_mark_disassoc(wpa_s);
|
|
}
|
|
|
|
|
|
void sme_event_disassoc(struct wpa_supplicant *wpa_s,
|
|
struct disassoc_info *info)
|
|
{
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Disassociation event received");
|
|
if (wpa_s->sme.prev_bssid_set) {
|
|
/*
|
|
* cfg80211/mac80211 can get into somewhat confused state if
|
|
* the AP only disassociates us and leaves us in authenticated
|
|
* state. For now, force the state to be cleared to avoid
|
|
* confusing errors if we try to associate with the AP again.
|
|
*/
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Deauthenticate to clear "
|
|
"driver state");
|
|
wpa_drv_deauthenticate(wpa_s, wpa_s->sme.prev_bssid,
|
|
WLAN_REASON_DEAUTH_LEAVING);
|
|
}
|
|
}
|
|
|
|
|
|
static void sme_auth_timer(void *eloop_ctx, void *timeout_ctx)
|
|
{
|
|
struct wpa_supplicant *wpa_s = eloop_ctx;
|
|
if (wpa_s->wpa_state == WPA_AUTHENTICATING) {
|
|
wpa_msg(wpa_s, MSG_DEBUG, "SME: Authentication timeout");
|
|
sme_deauth(wpa_s);
|
|
}
|
|
}
|
|
|
|
|
|
static void sme_assoc_timer(void *eloop_ctx, void *timeout_ctx)
|
|
{
|
|
struct wpa_supplicant *wpa_s = eloop_ctx;
|
|
if (wpa_s->wpa_state == WPA_ASSOCIATING) {
|
|
wpa_msg(wpa_s, MSG_DEBUG, "SME: Association timeout");
|
|
sme_deauth(wpa_s);
|
|
}
|
|
}
|
|
|
|
|
|
void sme_state_changed(struct wpa_supplicant *wpa_s)
|
|
{
|
|
/* Make sure timers are cleaned up appropriately. */
|
|
if (wpa_s->wpa_state != WPA_ASSOCIATING)
|
|
eloop_cancel_timeout(sme_assoc_timer, wpa_s, NULL);
|
|
if (wpa_s->wpa_state != WPA_AUTHENTICATING)
|
|
eloop_cancel_timeout(sme_auth_timer, wpa_s, NULL);
|
|
}
|
|
|
|
|
|
void sme_disassoc_while_authenticating(struct wpa_supplicant *wpa_s,
|
|
const u8 *prev_pending_bssid)
|
|
{
|
|
/*
|
|
* mac80211-workaround to force deauth on failed auth cmd,
|
|
* requires us to remain in authenticating state to allow the
|
|
* second authentication attempt to be continued properly.
|
|
*/
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Allow pending authentication "
|
|
"to proceed after disconnection event");
|
|
wpa_supplicant_set_state(wpa_s, WPA_AUTHENTICATING);
|
|
os_memcpy(wpa_s->pending_bssid, prev_pending_bssid, ETH_ALEN);
|
|
|
|
/*
|
|
* Re-arm authentication timer in case auth fails for whatever reason.
|
|
*/
|
|
eloop_cancel_timeout(sme_auth_timer, wpa_s, NULL);
|
|
eloop_register_timeout(SME_AUTH_TIMEOUT, 0, sme_auth_timer, wpa_s,
|
|
NULL);
|
|
}
|
|
|
|
|
|
void sme_clear_on_disassoc(struct wpa_supplicant *wpa_s)
|
|
{
|
|
wpa_s->sme.prev_bssid_set = 0;
|
|
#ifdef CONFIG_SAE
|
|
wpabuf_free(wpa_s->sme.sae_token);
|
|
wpa_s->sme.sae_token = NULL;
|
|
sae_clear_data(&wpa_s->sme.sae);
|
|
#endif /* CONFIG_SAE */
|
|
#ifdef CONFIG_IEEE80211R
|
|
if (wpa_s->sme.ft_ies || wpa_s->sme.ft_used)
|
|
sme_update_ft_ies(wpa_s, NULL, NULL, 0);
|
|
#endif /* CONFIG_IEEE80211R */
|
|
#ifdef CONFIG_IEEE80211W
|
|
sme_stop_sa_query(wpa_s);
|
|
#endif /* CONFIG_IEEE80211W */
|
|
}
|
|
|
|
|
|
void sme_deinit(struct wpa_supplicant *wpa_s)
|
|
{
|
|
sme_clear_on_disassoc(wpa_s);
|
|
|
|
eloop_cancel_timeout(sme_assoc_timer, wpa_s, NULL);
|
|
eloop_cancel_timeout(sme_auth_timer, wpa_s, NULL);
|
|
eloop_cancel_timeout(sme_obss_scan_timeout, wpa_s, NULL);
|
|
}
|
|
|
|
|
|
static void sme_send_2040_bss_coex(struct wpa_supplicant *wpa_s,
|
|
const u8 *chan_list, u8 num_channels,
|
|
u8 num_intol)
|
|
{
|
|
struct ieee80211_2040_bss_coex_ie *bc_ie;
|
|
struct ieee80211_2040_intol_chan_report *ic_report;
|
|
struct wpabuf *buf;
|
|
|
|
wpa_printf(MSG_DEBUG, "SME: Send 20/40 BSS Coexistence to " MACSTR
|
|
" (num_channels=%u num_intol=%u)",
|
|
MAC2STR(wpa_s->bssid), num_channels, num_intol);
|
|
wpa_hexdump(MSG_DEBUG, "SME: 20/40 BSS Intolerant Channels",
|
|
chan_list, num_channels);
|
|
|
|
buf = wpabuf_alloc(2 + /* action.category + action_code */
|
|
sizeof(struct ieee80211_2040_bss_coex_ie) +
|
|
sizeof(struct ieee80211_2040_intol_chan_report) +
|
|
num_channels);
|
|
if (buf == NULL)
|
|
return;
|
|
|
|
wpabuf_put_u8(buf, WLAN_ACTION_PUBLIC);
|
|
wpabuf_put_u8(buf, WLAN_PA_20_40_BSS_COEX);
|
|
|
|
bc_ie = wpabuf_put(buf, sizeof(*bc_ie));
|
|
bc_ie->element_id = WLAN_EID_20_40_BSS_COEXISTENCE;
|
|
bc_ie->length = 1;
|
|
if (num_intol)
|
|
bc_ie->coex_param |= WLAN_20_40_BSS_COEX_20MHZ_WIDTH_REQ;
|
|
|
|
if (num_channels > 0) {
|
|
ic_report = wpabuf_put(buf, sizeof(*ic_report));
|
|
ic_report->element_id = WLAN_EID_20_40_BSS_INTOLERANT;
|
|
ic_report->length = num_channels + 1;
|
|
ic_report->op_class = 0;
|
|
os_memcpy(wpabuf_put(buf, num_channels), chan_list,
|
|
num_channels);
|
|
}
|
|
|
|
if (wpa_drv_send_action(wpa_s, wpa_s->assoc_freq, 0, wpa_s->bssid,
|
|
wpa_s->own_addr, wpa_s->bssid,
|
|
wpabuf_head(buf), wpabuf_len(buf), 0) < 0) {
|
|
wpa_msg(wpa_s, MSG_INFO,
|
|
"SME: Failed to send 20/40 BSS Coexistence frame");
|
|
}
|
|
|
|
wpabuf_free(buf);
|
|
}
|
|
|
|
|
|
int sme_proc_obss_scan(struct wpa_supplicant *wpa_s)
|
|
{
|
|
struct wpa_bss *bss;
|
|
const u8 *ie;
|
|
u16 ht_cap;
|
|
u8 chan_list[P2P_MAX_CHANNELS], channel;
|
|
u8 num_channels = 0, num_intol = 0, i;
|
|
|
|
if (!wpa_s->sme.sched_obss_scan)
|
|
return 0;
|
|
|
|
wpa_s->sme.sched_obss_scan = 0;
|
|
if (!wpa_s->current_bss || wpa_s->wpa_state != WPA_COMPLETED)
|
|
return 1;
|
|
|
|
/*
|
|
* Check whether AP uses regulatory triplet or channel triplet in
|
|
* country info. Right now the operating class of the BSS channel
|
|
* width trigger event is "unknown" (IEEE Std 802.11-2012 10.15.12),
|
|
* based on the assumption that operating class triplet is not used in
|
|
* beacon frame. If the First Channel Number/Operating Extension
|
|
* Identifier octet has a positive integer value of 201 or greater,
|
|
* then its operating class triplet.
|
|
*
|
|
* TODO: If Supported Operating Classes element is present in beacon
|
|
* frame, have to lookup operating class in Annex E and fill them in
|
|
* 2040 coex frame.
|
|
*/
|
|
ie = wpa_bss_get_ie(wpa_s->current_bss, WLAN_EID_COUNTRY);
|
|
if (ie && (ie[1] >= 6) && (ie[5] >= 201))
|
|
return 1;
|
|
|
|
os_memset(chan_list, 0, sizeof(chan_list));
|
|
|
|
dl_list_for_each(bss, &wpa_s->bss, struct wpa_bss, list) {
|
|
/* Skip other band bss */
|
|
enum hostapd_hw_mode mode;
|
|
mode = ieee80211_freq_to_chan(bss->freq, &channel);
|
|
if (mode != HOSTAPD_MODE_IEEE80211G &&
|
|
mode != HOSTAPD_MODE_IEEE80211B)
|
|
continue;
|
|
|
|
ie = wpa_bss_get_ie(bss, WLAN_EID_HT_CAP);
|
|
ht_cap = (ie && (ie[1] == 26)) ? WPA_GET_LE16(ie + 2) : 0;
|
|
wpa_printf(MSG_DEBUG, "SME OBSS scan BSS " MACSTR
|
|
" freq=%u chan=%u ht_cap=0x%x",
|
|
MAC2STR(bss->bssid), bss->freq, channel, ht_cap);
|
|
|
|
if (!ht_cap || (ht_cap & HT_CAP_INFO_40MHZ_INTOLERANT)) {
|
|
if (ht_cap & HT_CAP_INFO_40MHZ_INTOLERANT)
|
|
num_intol++;
|
|
|
|
/* Check whether the channel is already considered */
|
|
for (i = 0; i < num_channels; i++) {
|
|
if (channel == chan_list[i])
|
|
break;
|
|
}
|
|
if (i != num_channels)
|
|
continue;
|
|
|
|
chan_list[num_channels++] = channel;
|
|
}
|
|
}
|
|
|
|
sme_send_2040_bss_coex(wpa_s, chan_list, num_channels, num_intol);
|
|
return 1;
|
|
}
|
|
|
|
|
|
static void wpa_obss_scan_freqs_list(struct wpa_supplicant *wpa_s,
|
|
struct wpa_driver_scan_params *params)
|
|
{
|
|
/* Include only affected channels */
|
|
struct hostapd_hw_modes *mode;
|
|
int count, i;
|
|
int start, end;
|
|
|
|
mode = get_mode(wpa_s->hw.modes, wpa_s->hw.num_modes,
|
|
HOSTAPD_MODE_IEEE80211G);
|
|
if (mode == NULL) {
|
|
/* No channels supported in this band - use empty list */
|
|
params->freqs = os_zalloc(sizeof(int));
|
|
return;
|
|
}
|
|
|
|
if (wpa_s->sme.ht_sec_chan == HT_SEC_CHAN_UNKNOWN &&
|
|
wpa_s->current_bss) {
|
|
const u8 *ie;
|
|
|
|
ie = wpa_bss_get_ie(wpa_s->current_bss, WLAN_EID_HT_OPERATION);
|
|
if (ie && ie[1] >= 2) {
|
|
u8 o;
|
|
|
|
o = ie[3] & HT_INFO_HT_PARAM_SECONDARY_CHNL_OFF_MASK;
|
|
if (o == HT_INFO_HT_PARAM_SECONDARY_CHNL_ABOVE)
|
|
wpa_s->sme.ht_sec_chan = HT_SEC_CHAN_ABOVE;
|
|
else if (o == HT_INFO_HT_PARAM_SECONDARY_CHNL_BELOW)
|
|
wpa_s->sme.ht_sec_chan = HT_SEC_CHAN_BELOW;
|
|
}
|
|
}
|
|
|
|
start = wpa_s->assoc_freq - 10;
|
|
end = wpa_s->assoc_freq + 10;
|
|
switch (wpa_s->sme.ht_sec_chan) {
|
|
case HT_SEC_CHAN_UNKNOWN:
|
|
/* HT40+ possible on channels 1..9 */
|
|
if (wpa_s->assoc_freq <= 2452)
|
|
start -= 20;
|
|
/* HT40- possible on channels 5-13 */
|
|
if (wpa_s->assoc_freq >= 2432)
|
|
end += 20;
|
|
break;
|
|
case HT_SEC_CHAN_ABOVE:
|
|
end += 20;
|
|
break;
|
|
case HT_SEC_CHAN_BELOW:
|
|
start -= 20;
|
|
break;
|
|
}
|
|
wpa_printf(MSG_DEBUG,
|
|
"OBSS: assoc_freq %d possible affected range %d-%d",
|
|
wpa_s->assoc_freq, start, end);
|
|
|
|
params->freqs = os_calloc(mode->num_channels + 1, sizeof(int));
|
|
if (params->freqs == NULL)
|
|
return;
|
|
for (count = 0, i = 0; i < mode->num_channels; i++) {
|
|
int freq;
|
|
|
|
if (mode->channels[i].flag & HOSTAPD_CHAN_DISABLED)
|
|
continue;
|
|
freq = mode->channels[i].freq;
|
|
if (freq - 10 >= end || freq + 10 <= start)
|
|
continue; /* not affected */
|
|
params->freqs[count++] = freq;
|
|
}
|
|
}
|
|
|
|
|
|
static void sme_obss_scan_timeout(void *eloop_ctx, void *timeout_ctx)
|
|
{
|
|
struct wpa_supplicant *wpa_s = eloop_ctx;
|
|
struct wpa_driver_scan_params params;
|
|
|
|
if (!wpa_s->current_bss) {
|
|
wpa_printf(MSG_DEBUG, "SME OBSS: Ignore scan request");
|
|
return;
|
|
}
|
|
|
|
os_memset(¶ms, 0, sizeof(params));
|
|
wpa_obss_scan_freqs_list(wpa_s, ¶ms);
|
|
params.low_priority = 1;
|
|
wpa_printf(MSG_DEBUG, "SME OBSS: Request an OBSS scan");
|
|
|
|
if (wpa_supplicant_trigger_scan(wpa_s, ¶ms))
|
|
wpa_printf(MSG_DEBUG, "SME OBSS: Failed to trigger scan");
|
|
else
|
|
wpa_s->sme.sched_obss_scan = 1;
|
|
os_free(params.freqs);
|
|
|
|
eloop_register_timeout(wpa_s->sme.obss_scan_int, 0,
|
|
sme_obss_scan_timeout, wpa_s, NULL);
|
|
}
|
|
|
|
|
|
void sme_sched_obss_scan(struct wpa_supplicant *wpa_s, int enable)
|
|
{
|
|
const u8 *ie;
|
|
struct wpa_bss *bss = wpa_s->current_bss;
|
|
struct wpa_ssid *ssid = wpa_s->current_ssid;
|
|
struct hostapd_hw_modes *hw_mode = NULL;
|
|
int i;
|
|
|
|
eloop_cancel_timeout(sme_obss_scan_timeout, wpa_s, NULL);
|
|
wpa_s->sme.sched_obss_scan = 0;
|
|
wpa_s->sme.ht_sec_chan = HT_SEC_CHAN_UNKNOWN;
|
|
if (!enable)
|
|
return;
|
|
|
|
/*
|
|
* Schedule OBSS scan if driver is using station SME in wpa_supplicant
|
|
* or it expects OBSS scan to be performed by wpa_supplicant.
|
|
*/
|
|
if (!((wpa_s->drv_flags & WPA_DRIVER_FLAGS_SME) ||
|
|
(wpa_s->drv_flags & WPA_DRIVER_FLAGS_OBSS_SCAN)) ||
|
|
ssid == NULL || ssid->mode != WPAS_MODE_INFRA)
|
|
return;
|
|
|
|
if (!wpa_s->hw.modes)
|
|
return;
|
|
|
|
/* only HT caps in 11g mode are relevant */
|
|
for (i = 0; i < wpa_s->hw.num_modes; i++) {
|
|
hw_mode = &wpa_s->hw.modes[i];
|
|
if (hw_mode->mode == HOSTAPD_MODE_IEEE80211G)
|
|
break;
|
|
}
|
|
|
|
/* Driver does not support HT40 for 11g or doesn't have 11g. */
|
|
if (i == wpa_s->hw.num_modes || !hw_mode ||
|
|
!(hw_mode->ht_capab & HT_CAP_INFO_SUPP_CHANNEL_WIDTH_SET))
|
|
return;
|
|
|
|
if (bss == NULL || bss->freq < 2400 || bss->freq > 2500)
|
|
return; /* Not associated on 2.4 GHz band */
|
|
|
|
/* Check whether AP supports HT40 */
|
|
ie = wpa_bss_get_ie(wpa_s->current_bss, WLAN_EID_HT_CAP);
|
|
if (!ie || ie[1] < 2 ||
|
|
!(WPA_GET_LE16(ie + 2) & HT_CAP_INFO_SUPP_CHANNEL_WIDTH_SET))
|
|
return; /* AP does not support HT40 */
|
|
|
|
ie = wpa_bss_get_ie(wpa_s->current_bss,
|
|
WLAN_EID_OVERLAPPING_BSS_SCAN_PARAMS);
|
|
if (!ie || ie[1] < 14)
|
|
return; /* AP does not request OBSS scans */
|
|
|
|
wpa_s->sme.obss_scan_int = WPA_GET_LE16(ie + 6);
|
|
if (wpa_s->sme.obss_scan_int < 10) {
|
|
wpa_printf(MSG_DEBUG, "SME: Invalid OBSS Scan Interval %u "
|
|
"replaced with the minimum 10 sec",
|
|
wpa_s->sme.obss_scan_int);
|
|
wpa_s->sme.obss_scan_int = 10;
|
|
}
|
|
wpa_printf(MSG_DEBUG, "SME: OBSS Scan Interval %u sec",
|
|
wpa_s->sme.obss_scan_int);
|
|
eloop_register_timeout(wpa_s->sme.obss_scan_int, 0,
|
|
sme_obss_scan_timeout, wpa_s, NULL);
|
|
}
|
|
|
|
|
|
#ifdef CONFIG_IEEE80211W
|
|
|
|
static const unsigned int sa_query_max_timeout = 1000;
|
|
static const unsigned int sa_query_retry_timeout = 201;
|
|
static const unsigned int sa_query_ch_switch_max_delay = 5000; /* in usec */
|
|
|
|
static int sme_check_sa_query_timeout(struct wpa_supplicant *wpa_s)
|
|
{
|
|
u32 tu;
|
|
struct os_reltime now, passed;
|
|
os_get_reltime(&now);
|
|
os_reltime_sub(&now, &wpa_s->sme.sa_query_start, &passed);
|
|
tu = (passed.sec * 1000000 + passed.usec) / 1024;
|
|
if (sa_query_max_timeout < tu) {
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "SME: SA Query timed out");
|
|
sme_stop_sa_query(wpa_s);
|
|
wpa_supplicant_deauthenticate(
|
|
wpa_s, WLAN_REASON_PREV_AUTH_NOT_VALID);
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static void sme_send_sa_query_req(struct wpa_supplicant *wpa_s,
|
|
const u8 *trans_id)
|
|
{
|
|
u8 req[2 + WLAN_SA_QUERY_TR_ID_LEN + OCV_OCI_EXTENDED_LEN];
|
|
u8 req_len = 2 + WLAN_SA_QUERY_TR_ID_LEN;
|
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Sending SA Query Request to "
|
|
MACSTR, MAC2STR(wpa_s->bssid));
|
|
wpa_hexdump(MSG_DEBUG, "SME: SA Query Transaction ID",
|
|
trans_id, WLAN_SA_QUERY_TR_ID_LEN);
|
|
req[0] = WLAN_ACTION_SA_QUERY;
|
|
req[1] = WLAN_SA_QUERY_REQUEST;
|
|
os_memcpy(req + 2, trans_id, WLAN_SA_QUERY_TR_ID_LEN);
|
|
|
|
#ifdef CONFIG_OCV
|
|
if (wpa_sm_ocv_enabled(wpa_s->wpa)) {
|
|
struct wpa_channel_info ci;
|
|
|
|
if (wpa_drv_channel_info(wpa_s, &ci) != 0) {
|
|
wpa_printf(MSG_WARNING,
|
|
"Failed to get channel info for OCI element in SA Query Request frame");
|
|
return;
|
|
}
|
|
|
|
if (ocv_insert_extended_oci(&ci, req + req_len) < 0)
|
|
return;
|
|
|
|
req_len += OCV_OCI_EXTENDED_LEN;
|
|
}
|
|
#endif /* CONFIG_OCV */
|
|
|
|
if (wpa_drv_send_action(wpa_s, wpa_s->assoc_freq, 0, wpa_s->bssid,
|
|
wpa_s->own_addr, wpa_s->bssid,
|
|
req, req_len, 0) < 0)
|
|
wpa_msg(wpa_s, MSG_INFO, "SME: Failed to send SA Query "
|
|
"Request");
|
|
}
|
|
|
|
|
|
static void sme_sa_query_timer(void *eloop_ctx, void *timeout_ctx)
|
|
{
|
|
struct wpa_supplicant *wpa_s = eloop_ctx;
|
|
unsigned int timeout, sec, usec;
|
|
u8 *trans_id, *nbuf;
|
|
|
|
if (wpa_s->sme.sa_query_count > 0 &&
|
|
sme_check_sa_query_timeout(wpa_s))
|
|
return;
|
|
|
|
nbuf = os_realloc_array(wpa_s->sme.sa_query_trans_id,
|
|
wpa_s->sme.sa_query_count + 1,
|
|
WLAN_SA_QUERY_TR_ID_LEN);
|
|
if (nbuf == NULL) {
|
|
sme_stop_sa_query(wpa_s);
|
|
return;
|
|
}
|
|
if (wpa_s->sme.sa_query_count == 0) {
|
|
/* Starting a new SA Query procedure */
|
|
os_get_reltime(&wpa_s->sme.sa_query_start);
|
|
}
|
|
trans_id = nbuf + wpa_s->sme.sa_query_count * WLAN_SA_QUERY_TR_ID_LEN;
|
|
wpa_s->sme.sa_query_trans_id = nbuf;
|
|
wpa_s->sme.sa_query_count++;
|
|
|
|
if (os_get_random(trans_id, WLAN_SA_QUERY_TR_ID_LEN) < 0) {
|
|
wpa_printf(MSG_DEBUG, "Could not generate SA Query ID");
|
|
sme_stop_sa_query(wpa_s);
|
|
return;
|
|
}
|
|
|
|
timeout = sa_query_retry_timeout;
|
|
sec = ((timeout / 1000) * 1024) / 1000;
|
|
usec = (timeout % 1000) * 1024;
|
|
eloop_register_timeout(sec, usec, sme_sa_query_timer, wpa_s, NULL);
|
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Association SA Query attempt %d",
|
|
wpa_s->sme.sa_query_count);
|
|
|
|
sme_send_sa_query_req(wpa_s, trans_id);
|
|
}
|
|
|
|
|
|
static void sme_start_sa_query(struct wpa_supplicant *wpa_s)
|
|
{
|
|
sme_sa_query_timer(wpa_s, NULL);
|
|
}
|
|
|
|
|
|
static void sme_stop_sa_query(struct wpa_supplicant *wpa_s)
|
|
{
|
|
if (wpa_s->sme.sa_query_trans_id)
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Stop SA Query");
|
|
eloop_cancel_timeout(sme_sa_query_timer, wpa_s, NULL);
|
|
os_free(wpa_s->sme.sa_query_trans_id);
|
|
wpa_s->sme.sa_query_trans_id = NULL;
|
|
wpa_s->sme.sa_query_count = 0;
|
|
}
|
|
|
|
|
|
void sme_event_unprot_disconnect(struct wpa_supplicant *wpa_s, const u8 *sa,
|
|
const u8 *da, u16 reason_code)
|
|
{
|
|
struct wpa_ssid *ssid;
|
|
struct os_reltime now;
|
|
|
|
if (wpa_s->wpa_state != WPA_COMPLETED)
|
|
return;
|
|
ssid = wpa_s->current_ssid;
|
|
if (wpas_get_ssid_pmf(wpa_s, ssid) == NO_MGMT_FRAME_PROTECTION)
|
|
return;
|
|
if (os_memcmp(sa, wpa_s->bssid, ETH_ALEN) != 0)
|
|
return;
|
|
if (reason_code != WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA &&
|
|
reason_code != WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA)
|
|
return;
|
|
if (wpa_s->sme.sa_query_count > 0)
|
|
return;
|
|
|
|
os_get_reltime(&now);
|
|
if (wpa_s->sme.last_unprot_disconnect.sec &&
|
|
!os_reltime_expired(&now, &wpa_s->sme.last_unprot_disconnect, 10))
|
|
return; /* limit SA Query procedure frequency */
|
|
wpa_s->sme.last_unprot_disconnect = now;
|
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Unprotected disconnect dropped - "
|
|
"possible AP/STA state mismatch - trigger SA Query");
|
|
sme_start_sa_query(wpa_s);
|
|
}
|
|
|
|
|
|
void sme_event_ch_switch(struct wpa_supplicant *wpa_s)
|
|
{
|
|
unsigned int usec;
|
|
u32 _rand;
|
|
|
|
if (wpa_s->wpa_state != WPA_COMPLETED ||
|
|
!wpa_sm_ocv_enabled(wpa_s->wpa))
|
|
return;
|
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG,
|
|
"SME: Channel switch completed - trigger new SA Query to verify new operating channel");
|
|
sme_stop_sa_query(wpa_s);
|
|
|
|
if (os_get_random((u8 *) &_rand, sizeof(_rand)) < 0)
|
|
_rand = os_random();
|
|
usec = _rand % (sa_query_ch_switch_max_delay + 1);
|
|
eloop_register_timeout(0, usec, sme_sa_query_timer, wpa_s, NULL);
|
|
}
|
|
|
|
|
|
static void sme_process_sa_query_request(struct wpa_supplicant *wpa_s,
|
|
const u8 *sa, const u8 *data,
|
|
size_t len)
|
|
{
|
|
u8 resp[2 + WLAN_SA_QUERY_TR_ID_LEN + OCV_OCI_EXTENDED_LEN];
|
|
u8 resp_len = 2 + WLAN_SA_QUERY_TR_ID_LEN;
|
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Sending SA Query Response to "
|
|
MACSTR, MAC2STR(wpa_s->bssid));
|
|
|
|
resp[0] = WLAN_ACTION_SA_QUERY;
|
|
resp[1] = WLAN_SA_QUERY_RESPONSE;
|
|
os_memcpy(resp + 2, data + 1, WLAN_SA_QUERY_TR_ID_LEN);
|
|
|
|
#ifdef CONFIG_OCV
|
|
if (wpa_sm_ocv_enabled(wpa_s->wpa)) {
|
|
struct wpa_channel_info ci;
|
|
|
|
if (wpa_drv_channel_info(wpa_s, &ci) != 0) {
|
|
wpa_printf(MSG_WARNING,
|
|
"Failed to get channel info for OCI element in SA Query Response frame");
|
|
return;
|
|
}
|
|
|
|
if (ocv_insert_extended_oci(&ci, resp + resp_len) < 0)
|
|
return;
|
|
|
|
resp_len += OCV_OCI_EXTENDED_LEN;
|
|
}
|
|
#endif /* CONFIG_OCV */
|
|
|
|
if (wpa_drv_send_action(wpa_s, wpa_s->assoc_freq, 0, wpa_s->bssid,
|
|
wpa_s->own_addr, wpa_s->bssid,
|
|
resp, resp_len, 0) < 0)
|
|
wpa_msg(wpa_s, MSG_INFO,
|
|
"SME: Failed to send SA Query Response");
|
|
}
|
|
|
|
|
|
static void sme_process_sa_query_response(struct wpa_supplicant *wpa_s,
|
|
const u8 *sa, const u8 *data,
|
|
size_t len)
|
|
{
|
|
int i;
|
|
|
|
if (!wpa_s->sme.sa_query_trans_id)
|
|
return;
|
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Received SA Query response from "
|
|
MACSTR " (trans_id %02x%02x)", MAC2STR(sa), data[1], data[2]);
|
|
|
|
if (os_memcmp(sa, wpa_s->bssid, ETH_ALEN) != 0)
|
|
return;
|
|
|
|
for (i = 0; i < wpa_s->sme.sa_query_count; i++) {
|
|
if (os_memcmp(wpa_s->sme.sa_query_trans_id +
|
|
i * WLAN_SA_QUERY_TR_ID_LEN,
|
|
data + 1, WLAN_SA_QUERY_TR_ID_LEN) == 0)
|
|
break;
|
|
}
|
|
|
|
if (i >= wpa_s->sme.sa_query_count) {
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "SME: No matching SA Query "
|
|
"transaction identifier found");
|
|
return;
|
|
}
|
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Reply to pending SA Query received "
|
|
"from " MACSTR, MAC2STR(sa));
|
|
sme_stop_sa_query(wpa_s);
|
|
}
|
|
|
|
|
|
void sme_sa_query_rx(struct wpa_supplicant *wpa_s, const u8 *sa,
|
|
const u8 *data, size_t len)
|
|
{
|
|
if (len < 1 + WLAN_SA_QUERY_TR_ID_LEN)
|
|
return;
|
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Received SA Query frame from "
|
|
MACSTR " (trans_id %02x%02x)", MAC2STR(sa), data[1], data[2]);
|
|
|
|
#ifdef CONFIG_OCV
|
|
if (wpa_sm_ocv_enabled(wpa_s->wpa)) {
|
|
struct ieee802_11_elems elems;
|
|
struct wpa_channel_info ci;
|
|
|
|
if (ieee802_11_parse_elems(data + 1 + WLAN_SA_QUERY_TR_ID_LEN,
|
|
len - 1 - WLAN_SA_QUERY_TR_ID_LEN,
|
|
&elems, 1) == ParseFailed) {
|
|
wpa_printf(MSG_DEBUG,
|
|
"SA Query: Failed to parse elements");
|
|
return;
|
|
}
|
|
|
|
if (wpa_drv_channel_info(wpa_s, &ci) != 0) {
|
|
wpa_printf(MSG_WARNING,
|
|
"Failed to get channel info to validate received OCI in SA Query Action frame");
|
|
return;
|
|
}
|
|
|
|
if (ocv_verify_tx_params(elems.oci, elems.oci_len, &ci,
|
|
channel_width_to_int(ci.chanwidth),
|
|
ci.seg1_idx) != 0) {
|
|
wpa_printf(MSG_WARNING, "%s", ocv_errorstr);
|
|
return;
|
|
}
|
|
}
|
|
#endif /* CONFIG_OCV */
|
|
|
|
if (data[0] == WLAN_SA_QUERY_REQUEST)
|
|
sme_process_sa_query_request(wpa_s, sa, data, len);
|
|
else if (data[0] == WLAN_SA_QUERY_RESPONSE)
|
|
sme_process_sa_query_response(wpa_s, sa, data, len);
|
|
}
|
|
|
|
#endif /* CONFIG_IEEE80211W */
|